Commit Graph

13 Commits

Author SHA1 Message Date
Peter Zijlstra 4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Dan Carpenter c0914e6166 xen-pciback: silence an unwanted debug printk
There is a missing curly brace here so we might print some extra debug
information.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15 17:41:12 +01:00
Alexander Gordeev efdfa3eda5 xen-pciback: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-02-28 15:26:27 -05:00
Joe Perches 283c0972d5 xen: Convert printks to pr_<level>
Convert printks to pr_<level> (excludes printk(KERN_DEBUG...)
to be more consistent throughout the xen subsystem.

Add pr_fmt with KBUILD_MODNAME or "xen:" KBUILD_MODNAME
Coalesce formats and add missing word spaces
Add missing newlines
Align arguments and reflow to 80 columns
Remove DRV_NAME from formats as pr_fmt adds the same content

This does change some of the prefixes of these messages
but it also does make them more consistent.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-06-28 11:19:58 -04:00
Konrad Rzeszutek Wilk bdc5c1812c xen/pciback: Don't disable a PCI device that is already disabled.
While shuting down a HVM guest with pci devices passed through we
get this:

pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002)
------------[ cut here ]------------
WARNING: at drivers/pci/pci.c:1397 pci_disable_device+0x88/0xa0()
Hardware name: MS-7640
Device pciback
disabling already-disabled device
Modules linked in:
Pid: 53, comm: xenwatch Not tainted 3.9.0-rc1-20130304a+ #1
Call Trace:
 [<ffffffff8106994a>] warn_slowpath_common+0x7a/0xc0
 [<ffffffff81069a31>] warn_slowpath_fmt+0x41/0x50
 [<ffffffff813cf288>] pci_disable_device+0x88/0xa0
 [<ffffffff814554a7>] xen_pcibk_reset_device+0x37/0xd0
 [<ffffffff81454b6f>] ? pcistub_put_pci_dev+0x6f/0x120
 [<ffffffff81454b8d>] pcistub_put_pci_dev+0x8d/0x120
 [<ffffffff814582a9>] __xen_pcibk_release_devices+0x59/0xa0

This fixes the bug.

CC: stable@vger.kernel.org
Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06 10:00:25 -05:00
Jan Beulich 51ac8893a7 xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
... as being guest triggerable (e.g. by invoking
XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable).

This is CVE-2013-0231 / XSA-43.

Also make the two messages uniform in both their wording and severity.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-06 10:31:08 -05:00
Jan Beulich 0ee46eca04 xen/pciback: fix XEN_PCI_OP_enable_msix result
Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a
positive value to indicate the number of vectors (less than the amount
requested) that can be set up for a given device. Returning this as an
operation value (secondary result) is fine, but (primary) operation
results are expected to be negative (error) or zero (success) according
to the protocol. With the frontend fixed to match the XenoLinux
behavior, the backend can now validly return zero (success) here,
passing the upper limit on the number of vectors in op->value.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-06 12:13:55 -04:00
Jan Beulich 402c5e15b4 xen/pciback: miscellaneous adjustments
This is a minor bugfix and a set of small cleanups; as it is not clear
whether this needs splitting into pieces (and if so, at what
granularity), it is a single combined patch.
- add a missing return statement to an error path in
  kill_domain_by_device()
- use pci_is_enabled() rather than raw atomic_read()
- remove a bogus attempt to zero-terminate an already zero-terminated
  string
- #define DRV_NAME once uniformly in the shared local header
- make DRIVER_ATTR() variables static
- eliminate a pointless use of list_for_each_entry_safe()
- add MODULE_ALIAS()
- a little bit of constification
- adjust a few messages
- remove stray semicolons from inline function definitions

Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v1: Dropped the resource_size fix, altered the description]
[v2: Fixed cleanpatch.pl comments]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21 18:17:59 -04:00
Konrad Rzeszutek Wilk a92336a117 xen/pciback: Drop two backends, squash and cleanup some code.
- Remove the slot and controller controller backend as they
   are not used.
 - Document the find pciback_[read|write]_config_[byte|word|dword]
   to make it easier to find.
 - Collapse the code from conf_space_capability_msi into pciback_ops.c
 - Collapse conf_space_capability_[pm|vpd].c in conf_space_capability.c
   [and remove the conf_space_capability.h file]
 - Rename all visible functions from pciback to xen_pcibk.
 - Rename all the printk/pr_info, etc that use the "pciback" to say
   "xen-pciback".
 - Convert functions that are not referenced outside the code to be
   static to save on name space.
 - Do the same thing for structures that are internal to the driver.
 - Run checkpatch.pl after the renames and fixup its warnings and
   fix any compile errors caused by the variable rename
 - Cleanup any structs that checkpath.pl commented about or just
   look odd.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-19 20:58:35 -04:00
Konrad Rzeszutek Wilk e17ab35f05 xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
If we try to setup an fake IRQ handler for legacy interrupts
for devices that only have MSI-X (most if not all SR-IOV cards),
we will fail with this:

pciback[0000:01:10.0]: failed to install fake IRQ handler for IRQ 0! (rc:-38)

Since those cards don't have anything in dev->irq.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-19 20:58:34 -04:00
Konrad Rzeszutek Wilk 0513fe9e5b xen/pciback: Allocate IRQ handler for device that is shared with guest.
If the device that is to be shared with a guest is a level device and
the IRQ is shared with the initial domain we need to take actions.
Mainly we install a dummy IRQ handler that will ACK on the interrupt
line so as to not have the initial domain disable the interrupt line.

This dummy IRQ handler is not enabled when the device MSI/MSI-X lines
are set, nor for edge interrupts. And also not for level interrupts
that are not shared amongst devices. Lastly, if the user passes
to the guest all of the PCI devices on the shared line the we won't
install the dummy handler either.

There is also SysFS instrumentation to check its state and turn
IRQ ACKing on/off if necessary.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-19 20:58:31 -04:00
Konrad Rzeszutek Wilk a2be65fd36 xen/pciback: Disable MSI/MSI-X when reseting a device
In cases where the guest is abruptly killed and has not disabled
MSI/MSI-X interrupts we want to do it for it.

Otherwise when the guest is started up and enables MSI, we would
get a WARN() that the device already had been enabled.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-19 20:58:31 -04:00
Konrad Rzeszutek Wilk 30edc14bf3 xen/pciback: xen pci backend driver.
This is the host side counterpart to the frontend driver in
drivers/pci/xen-pcifront.c. The PV protocol is also implemented by
frontend drivers in other OSes too, such as the BSDs.

The PV protocol is rather simple. There is page shared with the guest,
which has the 'struct xen_pci_sharedinfo' embossed in it. The backend
has a thread that is kicked every-time the structure is changed and
based on the operation field it performs specific tasks:

 XEN_PCI_OP_conf_[read|write]:
   Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c)
   Based on which field is probed, we either enable/disable the PCI
   device, change power state, read VPD, etc. The major goal of this
   call is to provide a Physical IRQ (PIRQ) to the guest.

   The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ
   is tied in to the IO-APIC, or is a vector. For GSI type
   interrupts, the PIRQ==GSI holds. For MSI/MSI-X the
   PIRQ value != Linux IRQ number (thought PIRQ==vector).

   Please note, that with Xen, all interrupts (except those level shared ones)
   are injected directly to the guest - there is no host interaction.

 XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c)
   Enables/disables the MSI/MSI-X capability of the device. These operations
   setup the MSI/MSI-X vectors for the guest and pass them to the frontend.

   When the device is activated, the interrupts are directly injected in the
   guest without involving the host.

 XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure,
  perform the appropriate AER commands on the guest. Right now that is
  a cop-out - we just kill the guest.

Besides implementing those commands, it can also

 - hide a PCI device from the host. When booting up, the user can specify
   xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the
   device.

The driver was lifted from linux-2.6.18.hg tree and fixed up
so that it could compile under v3.0. Per suggestion from Jesse Barnes
moved the driver to drivers/xen/xen-pciback.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-07-19 20:58:01 -04:00