Commit Graph

1905 Commits

Author SHA1 Message Date
Linus Torvalds f67e3fb489 device-dax for 5.1
* Replace the /sys/class/dax device model with /sys/bus/dax, and include
   a compat driver so distributions can opt-in to the new ABI.
 
 * Allow for an alternative driver for the device-dax address-range
 
 * Introduce the 'kmem' driver to hotplug / assign a device-dax
   address-range to the core-mm.
 
 * Arrange for the device-dax target-node to be onlined so that the newly
   added memory range can be uniquely referenced by numa apis.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJchWpGAAoJEB7SkWpmfYgCJk8P/0Q1DINszUDO/vKjJ09cDs9P
 Jw3it6GBIL50rDOu9QdcprSpwYDD0h1mLAV/m6oa3bVO+p4uWGvnxaxRx2HN2c/v
 vhZFtUDpHlqR63vzWMNVKRprYixCRJDUr6xQhhCcE3ak/ELN6w7LWfikKVWv15UL
 MfR96IQU38f+xRda/zSXnL9606Dvkvu/inEHj84lRcHIwj3sQAUalrE8bR3O32gZ
 bDg/l5kzT49o8ZXUo/TegvRSSSZpJmOl2DD0RW+ax5q3NI2bOXFrVDUKBKxf/hcQ
 E/V9i57TrqQx0GqRhnU7rN/v53cFZGGs31TEEIB/xs3bzCnADxwXcjL5b5K005J6
 vJjBA2ODBewHFK3uVx46Hy1iV4eCtZWj4QrMnrjdSrjXOfbF5GTbWOhPFgoq7TWf
 S7VqFEf3I2gDPaMq4o8Ej1kLH4HMYeor2NSOZjyvGn87rSZ3ZIQguwbaNIVl+itz
 gdDt0ZOU0BgOBkV+rZIeZDaGdloWCHcDPL15CkZaOZyzdWhfEZ7dod6ad+9udilU
 EUPH62RgzXZtfm5zpebYyjNVLbb9pLZ0nT+UypyGR6zqWx1SqU3mXi63NFXPco+x
 XA9j//edPeI6NHg2CXLEh8DLuCg3dG1zWRJANkiF+niBwyCR8CHtGWAoY6soXbKe
 2UrXGcIfXxyJ8V9v8v4q
 =hfa3
 -----END PGP SIGNATURE-----

Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull device-dax updates from Dan Williams:
 "New device-dax infrastructure to allow persistent memory and other
  "reserved" / performance differentiated memories, to be assigned to
  the core-mm as "System RAM".

  Some users want to use persistent memory as additional volatile
  memory. They are willing to cope with potential performance
  differences, for example between DRAM and 3D Xpoint, and want to use
  typical Linux memory management apis rather than a userspace memory
  allocator layered over an mmap() of a dax file. The administration
  model is to decide how much Persistent Memory (pmem) to use as System
  RAM, create a device-dax-mode namespace of that size, and then assign
  it to the core-mm. The rationale for device-dax is that it is a
  generic memory-mapping driver that can be layered over any "special
  purpose" memory, not just pmem. On subsequent boots udev rules can be
  used to restore the memory assignment.

  One implication of using pmem as RAM is that mlock() no longer keeps
  data off persistent media. For this reason it is recommended to enable
  NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
  at rest. We considered making this recommendation an actively enforced
  requirement, but in the end decided to leave it as a distribution /
  administrator policy to allow for emulation and test environments that
  lack security capable NVDIMMs.

  Summary:

   - Replace the /sys/class/dax device model with /sys/bus/dax, and
     include a compat driver so distributions can opt-in to the new ABI.

   - Allow for an alternative driver for the device-dax address-range

   - Introduce the 'kmem' driver to hotplug / assign a device-dax
     address-range to the core-mm.

   - Arrange for the device-dax target-node to be onlined so that the
     newly added memory range can be uniquely referenced by numa apis"

NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.

And apparently the PMEM modules can cause that a lot more than regular
RAM.  The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.

Quoting Dan from another email:
 "The exposure can be reduced in the volatile-RAM case by scanning for
  and clearing errors before it is onlined as RAM. The userspace tooling
  for that can be in place before v5.1-final. There's also runtime
  notifications of errors via acpi_nfit_uc_error_notify() from
  background scrubbers on the DIMM devices. With that mechanism the
  kernel could proactively clear newly discovered poison in the volatile
  case, but that would be additional development more suitable for v5.2.

  I understand the concern, and the need to highlight this issue by
  tapping the brakes on feature development, but I don't see PMEM as RAM
  making the situation worse when the exposure is also there via DAX in
  the PMEM case. Volatile-RAM is arguably a safer use case since it's
  possible to repair pages where the persistent case needs active
  application coordination"

* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: "Hotplug" persistent memory for use like normal RAM
  mm/resource: Let walk_system_ram_range() search child resources
  mm/memory-hotplug: Allow memory resources to be children
  mm/resource: Move HMM pr_debug() deeper into resource code
  mm/resource: Return real error codes from walk failures
  device-dax: Add a 'modalias' attribute to DAX 'bus' devices
  device-dax: Add a 'target_node' attribute
  device-dax: Auto-bind device after successful new_id
  acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
  device-dax: Add /sys/class/dax backwards compatibility
  device-dax: Add support for a dax override driver
  device-dax: Move resource pinning+mapping into the common driver
  device-dax: Introduce bus + driver model
  device-dax: Start defining a dax bus model
  device-dax: Remove multi-resource infrastructure
  device-dax: Kill dax_region base
  device-dax: Kill dax_region ida
2019-03-16 13:05:32 -07:00
Linus Torvalds 5160bcce5c f2fs-for-5.1-rc1
We've continued mainly to fix bugs in this round, as f2fs has been shipped
 in more devices. Especially, we've focused on stabilizing checkpoint=disable
 feature, and provided some interfaces for QA.
 
 Enhancement:
  - expose FS_NOCOW_FL for pin_file
  - run discard jobs at unmount time with timeout
  - tune discarding thread to avoid idling which consumes power
  - some checking codes to address vulnerabilities
  - give random value to i_generation
  - shutdown with more flags for QA
 
 Bug fix:
  - clean up stale objects when mount is failed along with checkpoint=disable
  - fix system being stuck due to wrong count by atomic writes
  - handle some corrupted disk cases
  - fix a deadlock in f2fs_read_inline_dir
 
 We've also added some minor build errors and clean-up patches.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAlyKk4YACgkQQBSofoJI
 UNIMVw//Rb3nmbQkMW/86DxtHDxuS8GEJmle0DiHeFMHgwy0ET0uZs9/AEfmuejC
 95cXnF44QfVaFwkOXCK6aKXJXwN0+ZS0YvV/gPE8lgU6sdQhJBox5DC+rx+OwFq5
 rZiF8qvE8iyM9Xt+RfMBGufzUb+LKBz0ozQFZpKJiNTBBf5vpeqMYASEEfxiEmZz
 GvvUNSBRw39OB5zTl5l2hnoNqkoFu6XHnf4f9+DnraVi8SuQzj6hdqsx0nYTHfLi
 Rax8kA4HUwoVgjhaLLXFbbhWIQ83bcZ0cj6wq7Lr7NbbIi7bKYP6sxtKjbe2Fuql
 m9Chm2LIvD1BfJnjdTk2krqY7Z4bX/4gmXukno/8X/cjWkpBV6HFWS73iTgrJjU2
 d8kBFXwlIn+JlATSjsTtdfvKkTwxUhaGw1bBA96Am4c5tLQyOqyYWcfQA/tam/v4
 dM9EQX5ZeRb6NXDeIxkXNfTSpDRnqlhJsTV5aK8qporyF1RkKVbyCpSt1P4q3KO5
 UwsGZLFAVMzFaUVfyIS7dR5QVczQUTCH4g0yFNpBMvF8epOA4+jbYxQeGZfqFK3H
 mTC/Ba+VWWdYW2pZRNc9TnBsHg/xadMJq7EQb/ykGBe6JZJfB0wREj4LSr1lGK9a
 cU8JFGyqg1Rt/uRP0bb5IIec1YVton3Lq8ND9VZPNcV/mS5Gehg=
 =9BoH
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "We've continued mainly to fix bugs in this round, as f2fs has been
  shipped in more devices. Especially, we've focused on stabilizing
  checkpoint=disable feature, and provided some interfaces for QA.

  Enhancements:
   - expose FS_NOCOW_FL for pin_file
   - run discard jobs at unmount time with timeout
   - tune discarding thread to avoid idling which consumes power
   - some checking codes to address vulnerabilities
   - give random value to i_generation
   - shutdown with more flags for QA

  Bug fixes:
   - clean up stale objects when mount is failed along with
     checkpoint=disable
   - fix system being stuck due to wrong count by atomic writes
   - handle some corrupted disk cases
   - fix a deadlock in f2fs_read_inline_dir

  We've also added some minor build error fixes and clean-up patches"

* tag 'f2fs-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (53 commits)
  f2fs: set pin_file under CAP_SYS_ADMIN
  f2fs: fix to avoid deadlock in f2fs_read_inline_dir()
  f2fs: fix to adapt small inline xattr space in __find_inline_xattr()
  f2fs: fix to do sanity check with inode.i_inline_xattr_size
  f2fs: give some messages for inline_xattr_size
  f2fs: don't trigger read IO for beyond EOF page
  f2fs: fix to add refcount once page is tagged PG_private
  f2fs: remove wrong comment in f2fs_invalidate_page()
  f2fs: fix to use kvfree instead of kzfree
  f2fs: print more parameters in trace_f2fs_map_blocks
  f2fs: trace f2fs_ioc_shutdown
  f2fs: fix to avoid deadlock of atomic file operations
  f2fs: fix to dirty inode for i_mode recovery
  f2fs: give random value to i_generation
  f2fs: no need to take page lock in readdir
  f2fs: fix to update iostat correctly in IPU path
  f2fs: fix encrypted page memory leak
  f2fs: make fault injection covering __submit_flush_wait()
  f2fs: fix to retry fill_super only if recovery failed
  f2fs: silence VM_WARN_ON_ONCE in mempool_alloc
  ...
2019-03-15 13:42:53 -07:00
Linus Torvalds a5adcfcad5 A large number of bug fixes and cleanups. One new feature to allow
users to more easily find the jbd2 journal thread for a particular
 ext4 file system.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlx8utQACgkQ8vlZVpUN
 gaOMOQf+Olp6hTbCuPJNill7npEejkPu9VhNvLPp3dLPBfsyqG9IOZmUaKKtr3LS
 ZYYzMMoIlbHDsWM70O92zDS3s1ThKRFoDdcw4YKXkn1Awlqc4LRZ/NnzyIIdA3mK
 rhOvcr6ttWk2B2S67nGceTH08SX5zACMtMiQijP58+GCp4Xe+PdqPRRjYYJSOZMv
 xCS43LoWY0tkeBTQuk9WYTi6G/E1X/aiq06pYiQzP69PotN6/cFSdNgP1r+7dYiS
 V4IXPqEqFt8NvUZb1bJchT3+2zM3Xi/+n//7yLkpY7OhX6p1p24oB7abMstp3ssU
 BlF8KP4elQcI892QX2Hf+0r4tBu+0w==
 =2yLu
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "A large number of bug fixes and cleanups.

  One new feature to allow users to more easily find the jbd2 journal
  thread for a particular ext4 file system"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  jbd2: jbd2_get_transaction does not need to return a value
  jbd2: fix invalid descriptor block checksum
  ext4: fix bigalloc cluster freeing when hole punching under load
  ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
  ext4: Change debugging support help prefix from EXT4 to Ext4
  ext4: fix compile error when using BUFFER_TRACE
  jbd2: fix compile warning when using JBUFFER_TRACE
  ext4: fix some error pointer dereferences
  ext4: annotate more implicit fall throughs
  ext4: annotate implicit fall throughs
  ext4: don't update s_rev_level if not required
  jbd2: fold jbd2_superblock_csum_{verify,set} into their callers
  jbd2: fix race when writing superblock
  ext4: fix crash during online resizing
  ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT
  ext4: add mask of ext4 flags to swap
  ext4: update quota information while swapping boot loader inode
  ext4: cleanup pagecache before swap i_data
  ext4: fix check of inode in swap_inode_boot_loader
  ext4: unlock unused_pages timely when doing writeback
  ...
2019-03-12 15:03:21 -07:00
Linus Torvalds f47d633134 chrome platform changes for v5.1
1. SPDX identifier cleanup for platform/chrome
 2. Cleanup series between mfd and chrome/platform, moving
    cros-ec attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome.
 3. Wilco EC driver
 4. Maintainership change to new group repository.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlyG4dIACgkQHwn1ewov
 5lhoqA//SXO5HU1qkhfvwUKyNsYxtIj4wDQF+j9tAPbVaOOaztq0b5D1PQgDGcEL
 SDl9FAXZtwhmPr5xiGPrPUxwn4JG+tUcgSSgIOCtClpA/SZUPt2wekAB64hLt1ui
 nkBRSgeRnXeeRE0nDh7EUrwAeaYj6yCg4AS8FMHmjWTG0tI6iivhuc39v/zDV8Br
 f4chOu/KEWS/EhItVlDBHE0mYDW2JGLSD3nqJR9MdujvYzbkN5WusJIXBDK6MOUl
 z1gqptVYyq/FQOQOCZ+vHjTNVYQ3N3NbPOnnQn4xAyYiqTQJVJv+x6dd7htncjVO
 567PFbbqbKzqrGWZOrdksxVa4JkIGfcgNG2mskRYKpEtHVOpMlHxwHqKv/93TQvw
 F0z4+43ZeAo0Fx2k+oOiDylpClDvUVOeH0z5suqIK15MZbpfWZF6d38Pz1Zwd8hY
 0TEldpyH83HiXylEuYabBwq3ABfj4VncYcMWfaW517LUrnH9nkJDNOlXQFreGTPt
 uHQPz+Xzfirk9wNwlEtfhqh3fjRWIfmiHc8bLmCB2XuJqavF0pozoQnJprw+72LR
 h4ALkUBr8laVfXYgG8SzNm/K4DlMjKqvJRY6m2b7AY8CTVgMur7ct0WJsvmECF+4
 2XDDvHwkQJt3XifVLpLgFRfR5YRlFxjwMNS8Zq0Bb/gjRqSSCo4=
 =2nC0
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

 - SPDX identifier cleanup for platform/chrome

 - Cleanup series between mfd and chrome/platform, moving cros-ec
   attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome

 - Wilco EC driver

 - Maintainership change to new group repository

* tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: fix wilco-ec dependencies
  platform/chrome: wilco_ec: Add RTC driver
  platform/chrome: wilco_ec: Add support for raw commands in debugfs
  platform/chrome: Add new driver for Wilco EC
  platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec
  MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree
  platform/chrome: cros_ec_sysfs: remove pr_fmt() define
  platform/chrome: cros_ec_lightbar: remove pr_fmt() define
  platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier
  platform/chrome: cros_ec_spi: switch to SPDX identifier
  platform/chrome: cros_ec_proto: switch to SPDX identifier
  platform/chrome: cros_ec_lpc: switch to SPDX identifier
  platform/chrome: cros_ec_i2c: switch to SPDX identifier
  platform/chrome: cros_ec_vbc: switch to SPDX identifier
  platform/chrome: cros_ec_sysfs: switch to SPDX identifier
  platform/chrome: cros_ec_lightbar: switch to SPDX identifier
  platform/chrome: cros_ec_debugfs: switch to SPDX identifier
  platform/chrome: cromeos_pstore: switch to SPDX identifier
2019-03-12 09:46:32 -07:00
Linus Torvalds a089e4fed5 linux-watchdog 5.1-rc1 tag
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iEYEABECAAYFAlyFIfgACgkQ+iyteGJfRsqt4gCgrgwSrDhwW+u7NjyY48KGAPgt
 xM8AoM31H9C2HrT2IJuKa3FjIawceUfw
 =wj0o
 -----END PGP SIGNATURE-----

Merge tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog driver for the Mellanox systems

 - renesas-wdt: Document r8a77470 support

 - numerous 'Mark expected switch fall-throughs'

 - qcom: Add suspend/resume support

 - some small fixes and documentation updates

* tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: w83877f_wdt: Mark expected switch fall-through
  watchdog: sc520_wdt: Mark expected switch fall-through
  watchdog: sbc60xxwdt: Mark expected switch fall-through
  watchdog: smsc37b787_wdt: Mark expected switch fall-through
  watchdog: sc1200: Mark expected switch fall-through
  watchdog: pc87413: Mark expected switch fall-through
  Documentation/watchdog: Add documentation mlx-wdt driver
  watchdog: mlx-wdt: introduce a watchdog driver for Mellanox systems.
  platform_data/mlxreg: additions for Mellanox watchdog driver.
  watchdog: Update sysfs documentation.
  watchdog: dw: remove useless pr_fmt
  watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
  watchdog/hpwdt: Update Kconfig documentation
  dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
  watchdog: qcom: Add suspend/resume support
2019-03-11 11:22:15 -07:00
Linus Torvalds dbbdf54c72 platform-drivers-x86 for v5.1-1
Use MODULE_DEVICE_TABLE across several wmi drivers, keeping
 wmi_device_id and MODULE_ALIAS() declarations in sync. Add several
 Ideapad models to the no_hw_rfkill list. Add support for new Mellanox
 platforms, including new fan and LED functionality. Address Dell
 keyboard backlight change event and power button release issues. Update
 dell_rbu to use appropriate memory allocation mechanisms. Several small
 fixes and Ice Lake support for intel_pmc_core. Fix a suspend regression
 for Cherry Trail based devices in intel_int0002_vgpio. A few other
 routine fixes.
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI / scan:
  -  Create platform device for BSG2150 ACPI nodes
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Correct mlxreg-io KernelVersion for 5.0
 
 MAINTAINERS:
  -  Include mlxreg.h in Mellanox Platform Driver files
 
 asus-wmi:
  -  Allow loading on systems without the Asus Management GUID
 
 dell-smbios-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  -  Ignore new keyboard backlight change event
 
 dell-wmi-descriptor:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell_rbu:
  -  fix lock imbalance in img_update_realloc
  -  stop abusing the DMA API
 
 huawei-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 ideapad-laptop:
  -  Add ideapad 330-15ICH to no_hw_rfkill
  -  Add S130-14IGM to no_hw_rfkill list
  -  Add Ideapad 530S-14ARR to no_hw_rfkill list
  -  Add Yoga C930 to no_hw_rfkill_list
  -  Add Y530-I5ICH-1060 to no_hw_rfkill list
  -  Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
 
 intel-hid:
  -  Missing power button release on some Dell models
 
 intel-wmi-thunderbolt:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 intel_int0002_vgpio:
  -  Only implement irq_set_wake on Bay Trail
 
 intel_pmc_core:
  -  Quirk to ignore XTAL shutdown
  -  Add Package cstates residency info
  -  Add ICL platform support
  -  Convert to INTEL_CPU_FAM6 macro
  -  Avoid a u32 overflow
  -  Include Reserved IP for LTR
  -  Fix file permissions for ltr_show
  -  Fix PCH IP name
  -  Fix PCH IP sts reading
  -  Handle CFL regmap properly
 
 leds:
  -  mlxreg: Add support for capability register
 
 mlx-platform:
  -  Fix access mode for fan_dir attribute
  -  Add UID LED for the next generation systems
  -  Add extra CPLD for next generation systems
  -  Add support for new VMOD0007 board name
  -  Add support for fan capability registers
  -  Add support for fan direction register
 
 modpost:
  -  file2alias: define size of alias
 
 platform/mellanox:
  -  mlxreg-hotplug: Fix KASAN warning
 
 platform_data/mlxreg:
  -  Add capability field to core platform data
  -  Document fixes for core platform data
 
 touchscreen_dmi:
  -  Add info for the CHUWI Hi10 Air tablet
  -  Add info for the Chuwi Hi8 Air tablet
  -  Add info for the PoV Wintab P1006w (v1.0) tablet
 
 wmi:
  -  add WMI support to MODULE_DEVICE_TABLE()
  -  move struct wmi_device_id to mod_devicetable.h
  -  fix potential null pointer dereference
 
 wmi-bmof:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 x86/CPU:
  -  Add Icelake model number
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9M1dh6j+oEL41EZIXFIlAfdBhuEFAlyCu1EACgkQXFIlAfdB
 huFASAf/d0Y6uqhLD3G7cL2kXjOWoTE9ouWUwv19bBpnohGmD3OMMap4y1lb6nRR
 thCJRhpmX4ObS2adAC4otiOxTzmVoYGsuS9kfBwhKIby2VYHCCxxaTUs6bzMdOfV
 GsbaMA+vfb29bU4DcWlRtYZIz2FC5oyjW4ZmcMA6KtuBGjG9K1fG5zANQe4H8I0e
 zCdcrXhpDGIBJgaJR2N42EUCJruPoEXYfHa1G4B/QKvuW0CXHAdSE0YrN4ju+S3e
 Ew9ZXhoxRaqlu+ZB7H5Kyy6Mg3ZGMzbeYyQFLk5f2yiKSTFNiqwTEJl1aE2JSpy3
 g8Im+6E44/4G8QOL40g5XwmrxHw5mA==
 =Bx4o
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:

 - use MODULE_DEVICE_TABLE across several wmi drivers, keeping
   wmi_device_id and MODULE_ALIAS() declarations in sync

 - add several Ideapad models to the no_hw_rfkill list

 - add support for new Mellanox platforms, including new fan and LED
   functionality

 - address Dell keyboard backlight change event and power button release
   issues

 - update dell_rbu to use appropriate memory allocation mechanisms

 - several small fixes and Ice Lake support for intel_pmc_core

 - fix a suspend regression for Cherry Trail based devices in
   intel_int0002_vgpio

 - a few other routine fixes

* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
  MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
  platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
  platform/x86: mlx-platform: Fix access mode for fan_dir attribute
  platform/x86: mlx-platform: Add UID LED for the next generation systems
  platform/x86: mlx-platform: Add extra CPLD for next generation systems
  platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
  platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
  modpost: file2alias: define size of alias
  platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
  platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
  platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
  platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
  platform/x86: intel_pmc_core: Add Package cstates residency info
  platform/x86: intel_pmc_core: Add ICL platform support
  ...
2019-03-10 13:16:37 -07:00
Linus Torvalds cf2e8c544c - New Drivers
- Add STMPE ADC Input driver
    - Add STMicroelectronics STPMIC1 Parent driver
    - Add STMicroelectronics STPMIC1 OnKey Misc driver
    - Add STMicroelectronics STPMIC1 Watchdog driver
    - Add Cirrus Logic Lochnagar Parent driver
    - Add TQ-Systems TQMX86 Parent driver
 
  - New Device Support
    - Add support for ADC to STMPE
 
  - New (or moved) Functionality
    - Move Lightbar functionality to its own driver; cros_ec_lightbar
    - Move VBC functionality to its own driver; cros_ec_vbc
    - Move VBC functionality to its own driver; cros_ec_vbc
    - Move DebugFS functionality to its own driver; cros_ec_debugfs
    - Move SYSFS functionality to its own driver; cros_ec_sysfs
    - Add support for input voltage options; tps65218
 
  - Fix-ups
    - Use devm_* managed resources; cros_ec
    - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
    - Trivial Clean-ups; stmpe
    - Rip out broken modular code; aat2870-core, adp5520, as3711,
          db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
 	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
 	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
    - Kconfig fixups; INTEL_SOC_PMIC
    - Improve error path; sm501, sec-core
    - Use struct_size() helper; sm501
    - Constify; at91-usart
    - Use pointers instead of copying data; at91-usart
    - Deliver proper return value; cros_ec_dev
    - Trivial formatting/whitespace; sec-core
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlyA5j4ACgkQUa+KL4f8
 d2EAyw/+N7N77ex5Ryxmyn61SWvgTL221tj+olw6RqC92Vfw6S2ZFP1CsM/E7tZb
 qCLYkkJSgBLKoOCI5OLiXsvWCPjyLU33nG/oS0SSiMJ1Fp9M0h7uRnOtOio3z31i
 w9MJAvEY3RN8I1bRGMO6aWUtT0q3AzHNtdl+7BqAkjjeXiUE0lGd5eARRS1zRWSa
 ki0OzUkJeszPk+6E6N0K+BQZxcL3cBEsR8ZAif903cMEbqsJIv4nmif4b5D63BKH
 PtOLn+6HVMG4bzqRRytVhcO/z2uj2jlLCHH9wBnyd4b7SoLFuz15yN5DhD4bKLt7
 0UMqiBlC2MeaTv3wyKjeNPQtaMY7zJNUpdFly1PHAYR4oy5kbqk2IAv30N/zRfPK
 zLmWWq7DYdazBxSSGKmpGEW63Dkr/MQY2oj4nUlcank/X0K7LvmXv7kIxp9jJhA5
 bE76f77uHneHvq5OTc5CZtaYNqZbE6tO8rqZ2QlfCqa0M8VxbcrYiym0fQFJBdsH
 eFtaTG162ssZq1npV759c4/2E3zQ3EW+rj89/AWp8ViJULQLyPY2nUYddx+w04Se
 kSdgYCvMI5byvF+Tuq/CbUWz7kyca3D+EFiYTkzIfrZr+4yiG2VO8wEO1knkEUVo
 9X/wnAD5hQJePEM8CyPZrnirndB0W6SAvSmRZlF/OAbuCBz1DkQ=
 =tUge
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add STMPE ADC Input driver
   - Add STMicroelectronics STPMIC1 Parent driver
   - Add STMicroelectronics STPMIC1 OnKey Misc driver
   - Add STMicroelectronics STPMIC1 Watchdog driver
   - Add Cirrus Logic Lochnagar Parent driver
   - Add TQ-Systems TQMX86 Parent driver

  New Device Support:
   - Add support for ADC to STMPE

  New (or moved) Functionality:
   - Move Lightbar functionality to its own driver; cros_ec_lightbar
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move DebugFS functionality to its own driver; cros_ec_debugfs
   - Move SYSFS functionality to its own driver; cros_ec_sysfs
   - Add support for input voltage options; tps65218

  Fixes:
   - Use devm_* managed resources; cros_ec
   - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
   - Trivial Clean-ups; stmpe
   - Rip out broken modular code; aat2870-core, adp5520, as3711,
         db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
   - Kconfig fixups; INTEL_SOC_PMIC
   - Improve error path; sm501, sec-core
   - Use struct_size() helper; sm501
   - Constify; at91-usart
   - Use pointers instead of copying data; at91-usart
   - Deliver proper return value; cros_ec_dev
   - Trivial formatting/whitespace; sec-core"

* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
  mfd: mxs-lradc: Mark expected switch fall-through
  mfd: sec-core: Cleanup formatting to a consistent style
  mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
  mfd: intel-lpss: Move linux/pm.h to the local header
  mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
  mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
  mfd: at91-usart: No need to copy mfd_cell in probe
  mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
  mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
  mfd: lochnagar: Add initial binding documentation
  dt-bindings: mfd: aspeed-lpc: Make parameter optional
  mfd: sec-core: Return gracefully instead of BUG() if device cannot match
  mfd: sm501: Use struct_size() in devm_kzalloc()
  mfd: sm501: Fix potential NULL pointer dereference
  mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
  mfd: tps65218.c: Add input voltage options
  mfd: wm8400-core: Make it explicitly non-modular
  mfd: wm8350-core: Drop unused module infrastructure from non-modular code
  mfd: wm8350-i2c: Make it explicitly non-modular
  mfd: wm831x-core: Drop unused module infrastructure from non-modular code
  ...
2019-03-08 10:02:58 -08:00
Linus Torvalds b7af27bf94 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina:

 - support for something we call 'atomic replace', and allows for much
   better handling of cumulative patches (which is something very useful
   for distros), from Jason Baron with help of Petr Mladek and Joe
   Lawrence

 - improvement of handling of tasks blocking finalization, from Miroslav
   Benes

 - update of MAINTAINERS file to reflect move towards group
   maintainership

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
  livepatch/selftests: use "$@" to preserve argument list
  livepatch: Module coming and going callbacks can proceed with all listed patches
  livepatch: Proper error handling in the shadow variables selftest
  livepatch: return -ENOMEM on ptr_id() allocation failure
  livepatch: Introduce klp_for_each_patch macro
  livepatch: core: Return EOPNOTSUPP instead of ENOSYS
  selftests/livepatch: add DYNAMIC_DEBUG config dependency
  livepatch: samples: non static warnings fix
  livepatch: update MAINTAINERS
  livepatch: Remove signal sysfs attribute
  livepatch: Send a fake signal periodically
  selftests/livepatch: introduce tests
  livepatch: Remove ordering (stacking) of the livepatches
  livepatch: Atomic replace and cumulative patches documentation
  livepatch: Remove Nop structures when unused
  livepatch: Add atomic replace
  livepatch: Use lists to manage patches, objects and functions
  livepatch: Simplify API by removing registration step
  livepatch: Don't block the removal of patches loaded after a forced transition
  livepatch: Consolidate klp_free functions
  ...
2019-03-08 08:58:25 -08:00
Linus Torvalds f90d64483e USB/PHY patches for 5.1-rc1
Here is the big USB/PHY driver pull request for 5.1-rc1.
 
 The usual set of gadget driver updates, phy driver updates (you will
 have a merge issue with Kconfig and Makefile), xhci updates, and typec
 additions.  Also included in here are a lot of small cleanups and fixes
 and driver updates where needed.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+hsw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynfNwCgqKKg+MxJ9pFjrwfWYOrbk+BBe2UAn2Elp4ia
 8FTdneQfN2J8Hhc6KGXE
 =Kx9I
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver pull request for 5.1-rc1.

  The usual set of gadget driver updates, phy driver updates, xhci
  updates, and typec additions. Also included in here are a lot of small
  cleanups and fixes and driver updates where needed.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  wusb: Remove unnecessary static function ckhdid_printf
  usb: core: make default autosuspend delay configurable
  usb: core: Fix typo in description of "authorized_default"
  usb: chipidea: Refactor USB PHY selection and keep a single PHY
  usb: chipidea: Grab the (legacy) USB PHY by phandle first
  usb: chipidea: imx: set power polarity
  dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
  usb: chipidea: imx: remove unused header files
  usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
  usb: core: add option of only authorizing internal devices
  usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
  usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
  usb: xhci: fix build warning - missing prototype
  usb: xhci: dbc: Fixing typo error.
  usb: xhci: remove unused member 'parent' in xhci_regset struct
  xhci: tegra: Prevent error pointer dereference
  USB: serial: option: add Telit ME910 ECM composition
  usb: core: Replace hardcoded check with inline function from usb.h
  usb: core: skip interfaces disabled in devicetree
  usb: typec: mux: remove redundant check on variable match
  ...
2019-03-06 16:48:27 -08:00
Linus Torvalds e266ca36da Staging/IIO patches for 5.1-rc1
Here is the big staging/iio driver pull request for 5.1-rc1.
 
 Lots of good IIO driver updates and cleanups in here as always.
 Combined with the removal of the xgifb driver, we have a net "loss" of
 over 9000 lines in the pull request, always a nice thing.
 
 As the outreachy application process is currently happening, there are
 loads of tiny checkpatch cleanup fixes all over the staging tree, which
 accounts for the majority of the fixups.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+gLQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymBiQCeJpoBhG+W3r+kP8w65ZY8qU+/liIAn0Tkl4/k
 IX1dQzCsEpO1jA8AHj6n
 =7wCH
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big staging/iio driver pull request for 5.1-rc1.

  Lots of good IIO driver updates and cleanups in here as always.
  Combined with the removal of the xgifb driver, we have a net "loss" of
  over 9000 lines in the pull request, always a nice thing.

  As the outreachy application process is currently happening, there are
  loads of tiny checkpatch cleanup fixes all over the staging tree,
  which accounts for the majority of the fixups"

* tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
  staging: mt7621-dma: remove license boilerplate text
  staging: mt7621-dma: add SPDX GPL-2.0+ license identifier
  Staging: ks7010: Replace typecast to int
  Staging: vt6655: Align a static function declaration
  staging: speakup: fix line over 80 characters.
  staging: mt7621-eth: Remove license boilerplate text
  staging: mt7621-eth: Add SPDX license identifier
  staging: ks7010: removed custom Michael MIC implementation.
  staging: rtl8192e: Fix space and suspect issue
  Staging: vt6655: Modify comment style of SPDX License Identifier
  Staging: vt6655: Modify comment style for SPDX-License-Identifier
  Staging: vt6655: Align a function declaration
  Staging: vt6655: Alignment of function declaration
  staging: rtl8712: Fix indentation issue
  staging: wilc1000: fix incorrent type in initializer
  staging: rtl8188eu: remove unused P2P_PRIVATE_IOCTL_SET_LEN
  staging: rtl8188eu: remove unused enum P2P_PROTO_WK_ID
  staging: rtl8723bs: Remove duplicated include from drv_types.h
  Staging: vt6655: Alignment should match open parenthesis
  staging: erofs: fix mis-acted TAIL merging behavior
  ...
2019-03-06 16:29:27 -08:00
Linus Torvalds 45763bf4bc Char/Misc driver patches for 5.1-rc1
Here is the big char/misc driver patch pull request for 5.1-rc1.
 
 The largest thing by far is the new habanalabs driver for their AI
 accelerator chip.  For now it is in the drivers/misc directory but will
 probably move to a new directory soon along with other drivers of this
 type.
 
 Other than that, just the usual set of individual driver updates and
 fixes.  There's an "odd" merge in here from the DRM tree that they asked
 me to do as the MEI driver is starting to interact with the i915 driver,
 and it needed some coordination.  All of those patches have been
 properly acked by the relevant subsystem maintainers.
 
 All of these have been in linux-next with no reported issues, most for
 quite some time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ
 9e3l7H76oe33o96Qjhor
 =8A2k
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...
2019-03-06 14:18:59 -08:00
Linus Torvalds cd2a3bf026 LED updates for 5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXH2D9wAKCRBiEGxRG/Sl
 2xRxAQDl+fx3qSZvyKFEdeklwz0EdBZyAGP9Jd9aU5AaVnJz5QD9EIh77Ii/HC1t
 Cm6TeM3kfF7JYcqfPlONJqhF4Bgb/A4=
 =y0aX
 -----END PGP SIGNATURE-----

Merge tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:

 - finalize previously announced support for initialization of pattern
   triggers from Device Tree

 - fix for null deref on firmware load failure in leds-lp55xx-common.c

* tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp55xx: fix null deref on firmware load failure
  leds: trigger: timer: Add initialization from Device Tree
  leds: trigger: oneshot: Add initialization from Device Tree
  leds: trigger: pattern: Add pattern initialization from Device Tree
  leds: Add helper for getting default pattern from Device Tree
  dt-bindings: leds: Add pattern initialization from Device Tree
2019-03-04 19:33:04 -08:00
Jerry Hoemann d02d104ea0 watchdog: Update sysfs documentation.
Document the sysfs attributes:
	pretimeout
	pretimeout_available_governors
	pretimeout_governor

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-03-02 15:28:19 +01:00
Greg Kroah-Hartman 99f63620b4 1. Exopsing counters for state changes of channel ring buffers; this is
useful to investigate performance issues. By Kimberly Brown.
 
 2. Switching to the new generic UUID API, by Andy Shevchenko.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAlx5S9AACgkQ3qZv95d3
 LNwZ3Q//Z4LbaJf8WQjym1N5/akdhw3q9WL6RDn2o8tqNcaQ5OTpUoiYLjpMdtkr
 pr7YV3/7K0IJS2AnExQ937e+OJ0FyFeXBIGKbaMgj4Z99k0ZwL90aUobj9/4En4P
 9HsKR1nqpYr/cetp9MquO8b8J/kocfU4CJm50RnzxgURgsULmAXY+HsfVMAyPVjJ
 VLbXxPgcuRPTurUzhi5QvDNYHI3pmKJMK17TmeWxKeamLDBDvkfuFqo/U7c/k+cw
 H66gY1Nni+PiYGAvS42COtEexpnhGn3xVZKxSpak9ZlP40DotQc1T9TLM45j3T8/
 paGv20vI9c4yt9NDnTyEoTTdNBmnzq8+/rGJRv5aIeCeQfD3mL+c48fJrdhduK2l
 3253nUfDGRR8KI/rLsLnN80Iey33/YUCy5LuxZy7eRY6xuf9zhzwvP4rKRaWbrqc
 VbC4kNiwcOYcwqMnkfayDrmtc6M3HEoHAmXvtTzvOI7dntPTf2oDMszTzHzxtAHl
 A6bEGXxaMTM/3AjvalThZbjEofyJ26HeZVxcDFApdjrJD//3Puo3XRL8iTLP06rN
 iV6z21NcCjrCP5hmN691Jlg3mhvZsn1SKhPfnnv9IVJ9hc+KheGE2n1bcSYOVpig
 eaFwn7GQnvYdS9KLZ2vKBhGWNwcJqmoTAk6toC80gdxe4Zeny3A=
 =hDVS
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux into char-misc-next

Sasha writes:

1. Exopsing counters for state changes of channel ring buffers; this is
useful to investigate performance issues. By Kimberly Brown.

2. Switching to the new generic UUID API, by Andy Shevchenko.

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Expose counters for interrupts and full conditions
  vmbus: Switch to use new generic UUID API
2019-03-01 16:43:50 +01:00
Nick Crews b787bb126c platform/chrome: wilco_ec: Add support for raw commands in debugfs
Add a debugfs attribute that allows sending raw commands to the EC.
This is useful for development and debug but should not be enabled
in a production environment.

To test:
Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00  .12/21/18.......

Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00  .12/21/18.......

Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
[Fix off-by-one error in wilco_ec/debugfs.c]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21 21:36:21 +01:00
Konstantin Khlebnikov bc1d69d615 ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
This is useful for moving journal thread into cgroup or
for tracing it with ftrace/perf/blktrace.

For now the only way is `pgrep jbd2/$DISK` but this is not reliable:
name may be longer than "comm" limit and any task could mock it.

Attribute shows pid in current pid-namespace or 0 if task is unreachable.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-21 11:49:27 -05:00
Greg Kroah-Hartman 7f2b8af282 stm class/intel_th: Updates for v5.1
These are:
   * 2 bugfixes in stm class
   * one bugfix in intel_th
   * a few minor cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iJkEABEIAEEWIQQSviFCoXpKPDNATbnrxfYkYwVX/wUCXG7HqCMcYWxleGFuZGVy
 LnNoaXNoa2luQGxpbnV4LmludGVsLmNvbQAKCRDrxfYkYwVX/4+gAP4kcSiNaRBa
 M+0/vceK2AxiRSoMt81kOYEQDNGK2QJLGAD+NjbFXmgl32jFqKbpj+O+kraWPb3P
 eJV7+nHj/nB72dM=
 =8AhL
 -----END PGP SIGNATURE-----

Merge tag 'intel_th-stm-for-greg-20190221' of git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next

Alexander writes:

stm class/intel_th: Updates for v5.1

These are:
  * 2 bugfixes in stm class
  * one bugfix in intel_th
  * a few minor cleanups

* tag 'intel_th-stm-for-greg-20190221' of git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm:
  stm class: Prevent division by zero
  stm class: Fix an endless loop in channel allocation
  intel_th: Don't reference unassigned outputs
  intel_th: pti: Use sysfs_match_string() helper
  intel_th: Only create useful device nodes
  intel_th: Mark expected switch fall-throughs
  intel_th: Update ABI documentation
2019-02-21 17:12:17 +01:00
Alexander Shishkin 1b948134c0 intel_th: Update ABI documentation
Commit a753bfcfdb ("intel_th: Make the switch allocate its subdevices")
changed the behavior so that the output port devices are created only for
the ports reported by the hardware and their initial state is "unassigned"
until a corresponding output port driver is loaded. Reflect this fact in
the ABI documentation.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reported-by: Ricardo Neri <ricardo.neri@intel.com>
2019-02-21 15:01:06 +02:00
Oded Gabbay c216477363 habanalabs: add debugfs support
This patch adds debugfs support to the driver. It allows the user-space to
display information that is contained in the internal structures of the
driver, such as:
- active command submissions
- active user virtual memory mappings
- number of allocated command buffers

It also enables the user to perform reads and writes through Goya's PCI
bars.

Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-18 09:46:46 +01:00
Oded Gabbay d91389bc83 habanalabs: add sysfs and hwmon support
This patch add the sysfs and hwmon entries that are exposed by the driver.

Goya has several sensors, from various categories such as temperature,
voltage, current, etc. The driver exposes those sensors in the standard
hwmon mechanism.

In addition, the driver exposes a couple of interfaces in sysfs, both for
configuration and for providing status of the device or driver.

The configuration attributes is for Power Management:
- Automatic or manual
- Frequency value when moving to high frequency mode
- Maximum power the device is allowed to consume

The rest of the attributes are read-only and provide the following
information:
- Versions of the various firmwares running on the device
- Contents of the device's EEPROM
- The device type (currently only Goya is supported)
- PCI address of the device (to allow user-space to connect between
  /dev/hlX to PCI address)
- Status of the device (operational, malfunction, in_reset)
- How many processes are open on the device's file

Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-18 09:46:45 +01:00
Kimberly Brown 396ae57ef1 Drivers: hv: vmbus: Expose counters for interrupts and full conditions
Counter values for per-channel interrupts and ring buffer full
conditions are useful for investigating performance.

Expose counters in sysfs for 2 types of guest to host interrupts:
1) Interrupts caused by the channel's outbound ring buffer transitioning
from empty to not empty
2) Interrupts caused by the channel's inbound ring buffer transitioning
from full to not full while a packet is waiting for enough buffer space to
become available

Expose 2 counters in sysfs for the number of times that write operations
encountered a full outbound ring buffer:
1) The total number of write operations that encountered a full
condition
2) The number of write operations that were the first to encounter a
full condition

Increment the outbound full condition counters in the
hv_ringbuffer_write() function because, for most drivers, a full
outbound ring buffer is detected in that function. Also increment the
outbound full condition counters in the set_channel_pending_send_size()
function. In the hv_sock driver, a full outbound ring buffer is detected
and set_channel_pending_send_size() is called before
hv_ringbuffer_write() is called.

I tested this patch by confirming that the sysfs files were created and
observing the counter values. The values seemed to increase by a
reasonable amount when the Hyper-v related drivers were in use.

Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-14 20:56:10 -05:00
Greg Kroah-Hartman 15e99b13b4 Merge 5.0-rc6 into usb-next
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11 09:28:39 +01:00
Greg Kroah-Hartman 3b6effbc38 Merge 5.0-rc6 into staging-next
We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11 09:25:01 +01:00
Jaegeuk Kim 03f2c02d8b f2fs: run discard jobs when put_super
When we umount f2fs, we need to avoid long delay due to discard commands, which
is actually taking tens of seconds, if storage is very slow on UNMAP. So, this
patch introduces timeout-based work on it.

By default, let me give 5 seconds for discard.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-02-04 08:55:34 -08:00
Jon Flatley 68f1ec8ea1 usb: Change "wired" to "hardwired" for connect_type
The sysfs documentation for /sys/bus/usb/.../portX/connect_type has one
of the possible values listed as "wired" when the actual value should be
"hardwired".

Changes the ABI documentation for connect_type to match the strings in
port.c.

Signed-off-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-04 12:58:03 +01:00
Greg Kroah-Hartman 1dcc3ed4a7 First set of new device support, features and cleanup for IIO in the 5.1 cycle
A number of interesting new devices supported plus a good set of staging
 cleanup including one graduation and one drop.
 
 New device support
 * ad56886
   - Add support for AD5674R/AD5679R with some minor driver changes to support
     more channels.
 * ad7768
   - New driver and dt bindings for this 24 bit ADC.
 * max44009
   - New driver and dt bindings for this ambient light sensor.
 * mpu6050
   - Support the ICM 20602 IMU. Minor tweaks due to slightly different
     register map.
 * NPCM adc
   - New driver and dt bindings for this BMC ADC.
 * Sensiron SGP30
   - Modifiers for ethanol and H2.
   - New driver and dt bindings.
   - Follow patch added self cleaning support.
 * Sensiron SPS30
   - New channel type for mass concentration.
   - New driver and bindings.
   - Minor tidy up patch followed (drop fmt specifier as unused)
 * st_pressure
   - lps22hh support. ID plus information structures and dt bindings.
 * ti-ads124s08
   - Add binding doc and driver.
 
 Staging graduations
 * ad7606 driver and bindings.
 
 Staging drops
 * ad7152 CDC driver dropped.  This part is near EoL and no one is known
   to be using it.  If anyone surfaces obviously we can bring the driver
   back.  If not, good to drop it to avoid wasting anyone's time cleaning
   it up.
 
 New features
 * bme680
   - DT support and bindings doc.
 * isl29018
   - Add regulator for VCC.
 * mag3110
   - Add regulators for supplies.
 * meson-saradc
   - Support the temperature sensors of more SoCs.
 * mma8452
   - Add regulators for power suplies and binding docs to reflect them.
 * st-accel
   - Support the undocumented but it seems fairly common _ONT ACPI method
     to specify orientation of the sensor.
 
 Cleanup, minor fixes and fixes for staging driver that have been broken a
 long time
 * ad5933
   - Drop platform data alternative to specifying the reference voltage
     using a regulator.
   - Use the clock framework to contorl the reference clock.
   - Add a DT binding doc to cover the defacto binding.
 * ad7280a
   - Split up some big functions to improve readability.
 * ad7606
   - Allow for timeout if interrupt never occurs.
   - Use devm functions to simplify probe and remove.
   - Use the find_closest macro to avoid need for precise values from
     userspace.
   - Add missing vendor prefixes for various DT properties. Note the
     driver is in staging still and there are no known devicetrees.
   - Add explict OF device ID table.
   - Simplify the Kconfig choices
   - Change to a threaded IRQ.
   - SPDX and simple stype fixes.
 * ad7816
   - Drop unnecessary variable init.
 * ad9523
   - Check a return value that was ignored.
 * ad9833
   - Drop platform data.  It was just setting most values to the hardware
     defaults.
   - Use the clock framework to provide the input clock.
 * adt7316 (lots of staging cleanup)
   - Fix some wrong register / bit definitions
   - Invert the logic of the check for an ldac pin so it actually makes sense.
   - Read the right register to get internal vref settings
   - Allow adt751x chips to use the internal vref for all DAC channels rather
     than a subset.
   - Remove dac vref bypass control from parts that don't have one.
   - Make the store DAC update mode function consistent with the show one.
   - Fix some spellings and other minor tidy up.
   - Avoid passing irq numbers around by putting all the irq logic in
     one place.
   - Fix an issue with the resolution of DAC control.
   - Fix support of the high resolution DAC mode (for temp proportional output)
     where supported.
   - Fix DAC read and write calculations.
 * st_lsm6dsx
   - Drop an unused variable (set but not read)
 * xilinx-xadc
   - Check an unhandled return value.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlxXWXwRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogtPhAAtGoXJl9gwBywQXjykFBiN5PxBxKypq58
 El7EQY7I0P/RkIVEBHgIc9p85lREVkIZQEcQZqsO5LI63cumCGtODyJg2CAF6+oz
 EIO0GCZFvb2zLiTyPg2NSuBhsYxiLtyHfu5MGPivbDyzVKZzf8LLjwQxkHYPaLzb
 Qa9D3wigoGHuvXpC9ULGQT36kMj6XPN9JGQsCRtbUQVgPu2XOPiuLv98vEpyaCPj
 1C7D72LAEq1Z5A3rA17KpT576Yy1JGv1LkSz48xEtHlDoB2IgCkoZfx6ThTr1ehX
 eWav1NsD1IpbWKiSY19rSmjSkkbYk1WHyV+tTeTguFb6nfIA/y22kl9td8Rqjk2P
 L/O1tRHdXO8G+gtCfBhUdVmT1SQq/vkow2UBH59CllN81bsWxFEudE4VHJCBlmjr
 sgMKdb3d0aYekRis/bNQJMvT0nY2x+g2k+ey+kEnrYOZVjCx+EeNNS249CnUnFId
 ZZNGqJ2j0xK9BULqffcupCoERLIhf/9nlx5JO3n5YA5X3pdns+yzVkS/9oXpN7EK
 9A41pU9zVWYN8B21MqfN0EPG41nkY36TOuTvL2/4/U2DfAD6VIf4vEYimrkTjsU0
 n7vKqQL8DRicWDsbxP8h6u/nG0u+ZgOgY4SVzth0aT3/plCAwhWmoQpnkjVFKMBD
 HBQB0HlEg2M=
 =M03w
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanup for IIO in the 5.1 cycle

A number of interesting new devices supported plus a good set of staging
cleanup including one graduation and one drop.

New device support
* ad56886
  - Add support for AD5674R/AD5679R with some minor driver changes to support
    more channels.
* ad7768
  - New driver and dt bindings for this 24 bit ADC.
* max44009
  - New driver and dt bindings for this ambient light sensor.
* mpu6050
  - Support the ICM 20602 IMU. Minor tweaks due to slightly different
    register map.
* NPCM adc
  - New driver and dt bindings for this BMC ADC.
* Sensiron SGP30
  - Modifiers for ethanol and H2.
  - New driver and dt bindings.
  - Follow patch added self cleaning support.
* Sensiron SPS30
  - New channel type for mass concentration.
  - New driver and bindings.
  - Minor tidy up patch followed (drop fmt specifier as unused)
* st_pressure
  - lps22hh support. ID plus information structures and dt bindings.
* ti-ads124s08
  - Add binding doc and driver.

Staging graduations
* ad7606 driver and bindings.

Staging drops
* ad7152 CDC driver dropped.  This part is near EoL and no one is known
  to be using it.  If anyone surfaces obviously we can bring the driver
  back.  If not, good to drop it to avoid wasting anyone's time cleaning
  it up.

New features
* bme680
  - DT support and bindings doc.
* isl29018
  - Add regulator for VCC.
* mag3110
  - Add regulators for supplies.
* meson-saradc
  - Support the temperature sensors of more SoCs.
* mma8452
  - Add regulators for power suplies and binding docs to reflect them.
* st-accel
  - Support the undocumented but it seems fairly common _ONT ACPI method
    to specify orientation of the sensor.

Cleanup, minor fixes and fixes for staging driver that have been broken a
long time
* ad5933
  - Drop platform data alternative to specifying the reference voltage
    using a regulator.
  - Use the clock framework to contorl the reference clock.
  - Add a DT binding doc to cover the defacto binding.
* ad7280a
  - Split up some big functions to improve readability.
* ad7606
  - Allow for timeout if interrupt never occurs.
  - Use devm functions to simplify probe and remove.
  - Use the find_closest macro to avoid need for precise values from
    userspace.
  - Add missing vendor prefixes for various DT properties. Note the
    driver is in staging still and there are no known devicetrees.
  - Add explict OF device ID table.
  - Simplify the Kconfig choices
  - Change to a threaded IRQ.
  - SPDX and simple stype fixes.
* ad7816
  - Drop unnecessary variable init.
* ad9523
  - Check a return value that was ignored.
* ad9833
  - Drop platform data.  It was just setting most values to the hardware
    defaults.
  - Use the clock framework to provide the input clock.
* adt7316 (lots of staging cleanup)
  - Fix some wrong register / bit definitions
  - Invert the logic of the check for an ldac pin so it actually makes sense.
  - Read the right register to get internal vref settings
  - Allow adt751x chips to use the internal vref for all DAC channels rather
    than a subset.
  - Remove dac vref bypass control from parts that don't have one.
  - Make the store DAC update mode function consistent with the show one.
  - Fix some spellings and other minor tidy up.
  - Avoid passing irq numbers around by putting all the irq logic in
    one place.
  - Fix an issue with the resolution of DAC control.
  - Fix support of the high resolution DAC mode (for temp proportional output)
    where supported.
  - Fix DAC read and write calculations.
* st_lsm6dsx
  - Drop an unused variable (set but not read)
* xilinx-xadc
  - Check an unhandled return value.

* tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (67 commits)
  iio: chemical: sps30: remove printk format specifier
  staging: iio: frequency: ad9833: Load clock using clock framework
  staging: iio: frequency: ad9833: Get frequency value statically
  dt-bindings: iio: light: Add max44009
  iio: light: add driver for MAX44009
  dt-bindings: iio: adc: Add docs for AD7768-1
  iio: adc: Add AD7768-1 ADC basic support
  staging: iio: cdc: ad7152: remove driver completely
  iio: imu: mpu6050: Add support for the ICM 20602 IMU
  dt-bindings: iio: imu: add icm20602 bindings to mpu6050
  dt-bindings: iio: pressure: add LPS22HH bindings
  iio: st_accel: use ACPI orientation data
  iio: adc: add NPCM ADC driver
  dt-binding: iio: add NPCM ADC documentation
  iio: chemical: sps30: allow changing self cleaning period
  dt-bindings: iio: chemical: Add bindings for bme680
  iio: chemical: bme680: Add device-tree support
  iio:st_pressure:initial lps22hh sensor support
  iio: accell: mma8452: add vdd/vddio regulator operation support
  dt-bindings: iio: accel: mma8452: add power supplies property
  ...
2019-02-04 07:06:36 +01:00
Enric Balletbo i Serra 6fd7f2bbd4 mfd / platform: cros_ec: Move device sysfs attributes to its own driver
The entire way how cros debugfs attibutes are created is broken.
cros_ec_sysfs should be its own driver and its attributes should be
associated with the sysfs driver not the mfd driver.

The patch also adds the sysfs documentation.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra acb9900f9e mfd / platform: cros_ec: Move vbc attributes to its own driver
The entire way how cros sysfs attibutes are created is broken.
cros_ec_vbc should be its own driver and its attributes should be
associated with a vbc driver not the mfd driver. In order to retain
the path, the vbc attributes are attached to the cros_class.

The patch also adds the sysfs documentation.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Enric Balletbo i Serra ecf8a6cd94 mfd / platform: cros_ec: Move lightbar attributes to its own driver
The entire way how cros sysfs attibutes are created is broken.
cros_ec_lightbar should be its own driver and its attributes should be
associated with a lightbar driver not the mfd driver. In order to retain
the path, the lightbar attributes are attached to the cros_class.

The patch also adds the sysfs documentation.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-01 08:09:27 +00:00
Darren Hart (VMware) 6a730fcb9c Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0
The mlxreg-io for the merge window assumed 4.21 as the next kernel
version. Replace 4.21 with 5.0.

Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-26 11:30:26 -08:00
Vadim Pasternak 2752e34442 Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
Add documentation for the new attribute fan_dir (fan direction for
systems of types MQM87xx, MSN34xx, MSN37xx.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: minor gramatical correction]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-01-26 11:08:25 -08:00
Darren Hart (VMware) 522e4ee6e5 Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0
The mlxreg-io for the merge window assumed 4.21 as the next kernel
version. Replace 4.21 with 5.0.

Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-01-26 11:08:25 -08:00
Tomasz Duszynski 62129a0849 iio: chemical: sps30: allow changing self cleaning period
Sensor can periodically trigger self cleaning. Period can be changed by
writing a new value to a dedicated attribute. Upon attribute read
current period gets returned.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-19 17:56:34 +00:00
Miroslav Benes 0b3d52790e livepatch: Remove signal sysfs attribute
The fake signal is send automatically now. We can rely on it completely
and remove the sysfs attribute.

Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-16 22:09:33 +01:00
Krzysztof Kozlowski 1dd7093742 dt-bindings: leds: Add pattern initialization from Device Tree
Document new led-pattern property for initialization of LED triggers.
The property format is trigger-specific (except being array of
integers).  For pattern trigger, the explanation of pattern format was
moved to a common file shared with sysfs ABI.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16 22:06:51 +01:00
Linus Torvalds b8c3b8992f for-linus-20190112
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlw6VoIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgptaHD/wLDzVDkptMK7Essk73vjBaz6w2MYl/Bvb4
 2YtktHlrCB8S/0Xze7t5tvsGxym2fv1ymsV48Sdnl+lW+2tf6e3LJEfAp7yLWoEs
 K6UdFkhYK7fdKx84dHIcslvyY0id9qjRteRiFHrd/023N4FZDkbKOtfeRBZi7e4Q
 yTP2FzQEnSV5a0ngh9J+xxHUXF7a4LfeVj9ddhwcBIAeJ1MUfLTaHxRR8Qc3nw3F
 7nGvLHu2vrWK3EDBBA/PsBqMJhsoW2AV0G7Xbv6Ai7e14GWVYr+MGjIYC41yIlRm
 46oBoveIRI5dkhR5/mO685vB774yAN6RExOP9Xlg/cA3XxbpdWP9uDtfRbuvo64O
 WOm2btWKjxOldCao4wClaJARcjSyocPTKwlWQE7OfVcN+3WbsD26sd+GdCvrSG7a
 +E3xcyPUURN1e7t4YyDGDL1wKBPuZP6jvcGUfoqLMr3O12aIjlAiJFPhm1Hqv+dA
 KaJjsCwShSDJfeWLvP/Lt1KtVoBinrKA/5qkkB7zJA7I+qNP7bAR25BtuXKo1U7t
 5vRGk7rfvdtsE5oH7y1we9AxoA7jD6t5Z60mPRdkVaXzi9SSw3th/YAuUhcU2g0V
 0I2icAGQI8bbZzFgJe+d4f1L57EQ/7fWfcwENNLkLu57E/gZlYYqt//tSrF8W0ur
 wcthJWqOZg==
 =OFV3
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph, with little fixes all over the map

 - Loop caching fix for offset/bs change (Jaegeuk Kim)

 - Block documentation tweaks (Jeff, Jon, Weiping, John)

 - null_blk zoned tweak (John)

 - ahch mvebu suspend/resume support. Should have gone into the merge
   window, but there was some confusion on which tree had it. (Miquel)

* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
  ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
  ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
  ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
  ata: ahci: mvebu: remove stale comment
  ata: libahci_platform: comply to PHY framework
  loop: drop caches if offset or block_size are changed
  block: fix kerneldoc comment for blk_attempt_plug_merge()
  nvme: don't initlialize ctrl->cntlid twice
  nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
  nvme: pad fake subsys NQN vid and ssvid with zeros
  nvme-multipath: zero out ANA log buffer
  nvme-fabrics: unset write/poll queues for discovery controllers
  nvme-tcp: don't ask if controller is fabrics
  nvme-tcp: remove dead code
  nvme-pci: fix out of bounds access in nvme_cqe_pending
  nvme-pci: rerun irq setup on IO queue init errors
  nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
  nvme-pci: fix the wrong setting of nr_maps
  block: doc: add slice_idle_us to bfq documentation
  block: clarify documentation for blk_{start|finish}_plug
  ...
2019-01-12 13:40:51 -08:00
Minchan Kim 1d69a3f8ae zram: idle writeback fixes and cleanup
This patch includes some fixes and cleanup for idle-page writeback.

1. writeback_limit interface

Now writeback_limit interface is rather conusing.  For example, once
writeback limit budget is exausted, admin can see 0 from
/sys/block/zramX/writeback_limit which is same semantic with disable
writeback_limit at this moment.  IOW, admin cannot tell that zero came
from disable writeback limit or exausted writeback limit.

To make the interface clear, let's sepatate enable of writeback limit to
another knob - /sys/block/zram0/writeback_limit_enable

* before:
  while true :
    # to re-enable writeback limit once previous one is used up
    echo 0 > /sys/block/zram0/writeback_limit
    echo $((200<<20)) > /sys/block/zram0/writeback_limit
    ..
    .. # used up the writeback limit budget

* new
  # To enable writeback limit, from the beginning, admin should
  # enable it.
  echo $((200<<20)) > /sys/block/zram0/writeback_limit
  echo 1 > /sys/block/zram/0/writeback_limit_enable
  while true :
    echo $((200<<20)) > /sys/block/zram0/writeback_limit
    ..
    .. # used up the writeback limit budget

It's much strightforward.

2. fix condition check idle/huge writeback mode check

The mode in writeback_store is not bit opeartion any more so no need to
use bit operations.  Furthermore, current condition check is broken in
that it does writeback every pages regardless of huge/idle.

3. clean up idle_store

No need to use goto.

[minchan@kernel.org: missed spin_lock_init]
  Link: http://lkml.kernel.org/r/20190103001601.GA255139@google.com
Link: http://lkml.kernel.org/r/20181224033529.19450-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Suggested-by: John Dias <joaodias@google.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: John Dias <joaodias@google.com>
Cc: Srinivas Paladugu <srnvs@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08 17:15:10 -08:00
Dan Williams 730926c3b0 device-dax: Add /sys/class/dax backwards compatibility
On the expectation that some environments may not upgrade libdaxctl
(userspace component that depends on the /sys/class/dax hierarchy),
provide a default / legacy dax_pmem_compat driver. The dax_pmem_compat
driver implements the original /sys/class/dax sysfs layout rather than
/sys/bus/dax. When userspace is upgraded it can blacklist this module
and switch to the dax_pmem driver going forward.

CONFIG_DEV_DAX_PMEM_COMPAT and supporting code will be deleted according
to the dax_pmem entry in Documentation/ABI/obsolete/.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-06 21:41:57 -08:00
Tomasz Duszynski c546d49656 iio: chemical: sps30: add support for self cleaning
Self cleaning is especially useful in cases where sensor undergoes
frequent power on/off cycles. In such scenarios it is recommended to
turn self cleaning at least once per week in order to maintain reliable
measurements.

Self cleaning is activated by writing 1 to a dedicated attribute.
Internal fan accelerates to its maximum speed and keeps spinning
for about 10 seconds blowing out accumulated dust.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Tested-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-05 16:10:39 +00:00
Weiping Zhang bb351abaf5 block: add documentation for io_timeout
Add documentation for /sys/block/<disk>/queue/io_timeout.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-04 19:19:51 -07:00
Linus Torvalds 9ab97aea85 f2fs-for-4.21-rc1
In this round, we've focused on bug fixes since Pixel devices have been
 shipping with f2fs. Some of them were related to hardware encryption support
 which are actually not an issue in mainline, but would be better to merge
 them in order to avoid potential bugs.
 
 Enhancement:
  - do GC sub-sections when the section is large
  - add a flag in ioctl(SHUTDOWN) to trigger fsck for QA
  - use kvmalloc() in order to give another chance to avoid ENOMEM
 
 Bug fix:
  - fix accessing memory boundaries in a malformed iamge
  - GC gives stale unencrypted block
  - GC counts in large sections
  - detect idle time more precisely
  - block allocation of DIO writes
  - race conditions between write_begin and write_checkpoint
  - allow GCs for node segments via ioctl()
 
 There are various clean-ups and minor bug fixes as well.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAlwmkzcACgkQQBSofoJI
 UNLIlw//RUd8rH8VMW/BcXQ3fwB8qFCk296cIVlWQu12BV7vmMKY886Sc+C9uAuR
 9Lze4D6Iyg1k2KLkaWKhnE2E4ZWQ2O5zVf11r4amm1bN9glPJAKfLWbenJhMfeGa
 IdWo1ksntxgjfqLim2QlGSv5cBUjEo8zf32D446BbQURQMD/mm/lndywItS5vTx1
 2eGKJ3pSXX6geFzyf1pD/wmC/7j6roKaTKAIMBagIuINNukeHctT/gRfklmYmOFC
 lRbXlsYhjIfGln6gktY6r4qyZbouOMad2fDl+dkp+UewQM4/2xLUaMqiN2eqd7Hr
 cag9LGe80MGgWwesqS6VOJHQviOlNd78Ie//iO1+ZsaIxKrvgzocRSDdxZswv+Vq
 reZNsEKH0s4/0ik9hiprW1NdQLvtg7e/UWPyrRvVRlDVitW/BXOWRBpGVgkdg01K
 OmAxNrVcr2+Gxp8jZL7M+rQdpApL/ms31x9HE/8u5ABBZfmCy3zhpICTZ6Hdngp1
 3iUi2PvKUg+Y7KgII1nK2HLDpmZZ5UkLm8NhxLI0ntBWExjQjOBasOxPJf4en/UR
 TAtK3ozNKim3fQ01NCBy3B8WMKRtovxLK6PgqNPROJparlKJ3FEHnPIrYKglDUPg
 sxWCm1gFSraRGP86TaeGeD+v+PP6erI9CTaf6F/U3pWFgIpHoPg=
 =NEns
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've focused on bug fixes since Pixel devices have
  been shipping with f2fs. Some of them were related to hardware
  encryption support which are actually not an issue in mainline, but
  would be better to merge them in order to avoid potential bugs.

  Enhancements:
   - do GC sub-sections when the section is large
   - add a flag in ioctl(SHUTDOWN) to trigger fsck for QA
   - use kvmalloc() in order to give another chance to avoid ENOMEM

  Bug fixes:
   - fix accessing memory boundaries in a malformed iamge
   - GC gives stale unencrypted block
   - GC counts in large sections
   - detect idle time more precisely
   - block allocation of DIO writes
   - race conditions between write_begin and write_checkpoint
   - allow GCs for node segments via ioctl()

  There are various clean-ups and minor bug fixes as well"

* tag 'f2fs-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (43 commits)
  f2fs: sanity check of xattr entry size
  f2fs: fix use-after-free issue when accessing sbi->stat_info
  f2fs: check PageWriteback flag for ordered case
  f2fs: fix validation of the block count in sanity_check_raw_super
  f2fs: fix missing unlock(sbi->gc_mutex)
  f2fs: fix to dirty inode synchronously
  f2fs: clean up structure extent_node
  f2fs: fix block address for __check_sit_bitmap
  f2fs: fix sbi->extent_list corruption issue
  f2fs: clean up checkpoint flow
  f2fs: flush stale issued discard candidates
  f2fs: correct wrong spelling, issing_*
  f2fs: use kvmalloc, if kmalloc is failed
  f2fs: remove redundant comment of unused wio_mutex
  f2fs: fix to reorder set_page_dirty and wait_on_page_writeback
  f2fs: clear PG_writeback if IPU failed
  f2fs: add an ioctl() to explicitly trigger fsck later
  f2fs: avoid frequent costly fsck triggers
  f2fs: fix m_may_create to make OPU DIO write correctly
  f2fs: fix to update new block address correctly for OPU
  ...
2018-12-31 09:41:37 -08:00
Linus Torvalds 457fa3469a Char/Misc driver patches for 4.21-rc1
Here is the big set of char and misc driver patches for 4.21-rc1.
 
 Lots of different types of driver things in here, as this tree seems to
 be the "collection of various driver subsystems not big enough to have
 their own git tree" lately.
 
 Anyway, some highlights of the changes in here:
   - binderfs: is it a rule that all driver subsystems will eventually
     grow to have their own filesystem?  Binder now has one to handle the
     use of it in containerized systems.  This was discussed at the
     Plumbers conference a few months ago and knocked into mergable shape
     very fast by Christian Brauner.  Who also has signed up to be
     another binder maintainer, showing a distinct lack of good judgement :)
   - binder updates and fixes
   - mei driver updates
   - fpga driver updates and additions
   - thunderbolt driver updates
   - soundwire driver updates
   - extcon driver updates
   - nvmem driver updates
   - hyper-v driver updates
   - coresight driver updates
   - pvpanic driver additions and reworking for more device support
   - lp driver updates.  Yes really, it's _finally_ moved to the proper
     parallal port driver model, something I never thought I would see
     happen.  Good stuff.
   - other tiny driver updates and fixes.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCZCUA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymF9QCgx/Z8Fj1qzGVGrIE4flXOi7pxOrgAoMqJEWtU
 ywwL8M9suKDz7cZT9fWQ
 =xxr6
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char and misc driver patches for 4.21-rc1.

  Lots of different types of driver things in here, as this tree seems
  to be the "collection of various driver subsystems not big enough to
  have their own git tree" lately.

  Anyway, some highlights of the changes in here:

   - binderfs: is it a rule that all driver subsystems will eventually
     grow to have their own filesystem? Binder now has one to handle the
     use of it in containerized systems.

     This was discussed at the Plumbers conference a few months ago and
     knocked into mergable shape very fast by Christian Brauner. Who
     also has signed up to be another binder maintainer, showing a
     distinct lack of good judgement :)

   - binder updates and fixes

   - mei driver updates

   - fpga driver updates and additions

   - thunderbolt driver updates

   - soundwire driver updates

   - extcon driver updates

   - nvmem driver updates

   - hyper-v driver updates

   - coresight driver updates

   - pvpanic driver additions and reworking for more device support

   - lp driver updates. Yes really, it's _finally_ moved to the proper
     parallal port driver model, something I never thought I would see
     happen. Good stuff.

   - other tiny driver updates and fixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
  MAINTAINERS: add another Android binder maintainer
  intel_th: msu: Fix an off-by-one in attribute store
  stm class: Add a reference to the SyS-T document
  stm class: Fix a module refcount leak in policy creation error path
  char: lp: use new parport device model
  char: lp: properly count the lp devices
  char: lp: use first unused lp number while registering
  char: lp: detach the device when parallel port is removed
  char: lp: introduce list to save port number
  bus: qcom: remove duplicated include from qcom-ebi2.c
  VMCI: Use memdup_user() rather than duplicating its implementation
  char/rtc: Use of_node_name_eq for node name comparisons
  misc: mic: fix a DMA pool free failure
  ptp: fix an IS_ERR() vs NULL check
  genwqe: Fix size check
  binder: implement binderfs
  binder: fix use-after-free due to ksys_close() during fdget()
  bus: fsl-mc: remove duplicated include files
  bus: fsl-mc: explicitly define the fsl_mc_command endianness
  misc: ti-st: make array read_ver_cmd static, shrinks object size
  ...
2018-12-28 20:54:57 -08:00
Linus Torvalds f346b0becb Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - large KASAN update to use arm's "software tag-based mode"

 - a few misc things

 - sh updates

 - ocfs2 updates

 - just about all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
  kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
  memcg, oom: notify on oom killer invocation from the charge path
  mm, swap: fix swapoff with KSM pages
  include/linux/gfp.h: fix typo
  mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
  hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
  hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
  memory_hotplug: add missing newlines to debugging output
  mm: remove __hugepage_set_anon_rmap()
  include/linux/vmstat.h: remove unused page state adjustment macro
  mm/page_alloc.c: allow error injection
  mm: migrate: drop unused argument of migrate_page_move_mapping()
  blkdev: avoid migration stalls for blkdev pages
  mm: migrate: provide buffer_migrate_page_norefs()
  mm: migrate: move migrate_page_lock_buffers()
  mm: migrate: lock buffers before migrate_page_move_mapping()
  mm: migration: factor out code to compute expected number of page references
  mm, page_alloc: enable pcpu_drain with zone capability
  kmemleak: add config to select auto scan
  mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
  ...
2018-12-28 16:55:46 -08:00
Linus Torvalds 0e9da3fbf7 for-4.21/block-20181221
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlwb7R8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjiID/97oDjMhNT7rwpuMbHw855h62j1hEN/m+N3
 FI0uxivYoYZLD+eJRnMcBwHlKjrCX8iJQAcv9ffI3ThtFW7dnZT3atUacaZVR/Dt
 IrxdymdBP3qsmuaId5NYBug7rJ+AiqFJKjEvCcSPu5X397J4I3SEbzhfvYLJ/aZX
 16o0HJlVVIrcbmq1IP4HwiIIOaKXvPaw04L4z4fpeynRSWG7EAi8NLSnhlR4Rxbb
 BTiMkCTsjRCFdyO6da4fvNQKWmPGPa3bJkYy3qR99cvJCeIbQjRyCloQlWNJRRgi
 3eJpCHVxqFmN0/+DNTJVQEEr4H8o0AVucrLVct1Jc4pessenkpoUniP8vELqwlng
 Z2VHLkhTfCEmvFlk82grrYdNvGATRsrbswt/PlP4T7rBfr1IpDk8kXDWF59EL2dy
 ly35Sk3wJGHBl8qa+vEPXOAnaWdqJXuVGpwB4ifOIatOls8mOxwfZjiRc7x05/fC
 1O4rR2IfLwRqwoYHs0AJ+h6ohOSn1mkGezl2Tch1VSFcJUOHmuYvraTaUi6hblpA
 SslaAoEhO39hRBL0HsvsMeqVWM9uzqvFkLDCfNPdiA81H1258CIbo4vF8z6czCIS
 eeXnTJxVhPVbZgb3a1a93SPwM6KIDZFoIijyd+NqjpU94thlnhYD0QEcKJIKH7os
 2p4aHs6ktw==
 =TRdW
 -----END PGP SIGNATURE-----

Merge tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "This is the main pull request for block/storage for 4.21.

  Larger than usual, it was a busy round with lots of goodies queued up.
  Most notable is the removal of the old IO stack, which has been a long
  time coming. No new features for a while, everything coming in this
  week has all been fixes for things that were previously merged.

  This contains:

   - Use atomic counters instead of semaphores for mtip32xx (Arnd)

   - Cleanup of the mtip32xx request setup (Christoph)

   - Fix for circular locking dependency in loop (Jan, Tetsuo)

   - bcache (Coly, Guoju, Shenghui)
      * Optimizations for writeback caching
      * Various fixes and improvements

   - nvme (Chaitanya, Christoph, Sagi, Jay, me, Keith)
      * host and target support for NVMe over TCP
      * Error log page support
      * Support for separate read/write/poll queues
      * Much improved polling
      * discard OOM fallback
      * Tracepoint improvements

   - lightnvm (Hans, Hua, Igor, Matias, Javier)
      * Igor added packed metadata to pblk. Now drives without metadata
        per LBA can be used as well.
      * Fix from Geert on uninitialized value on chunk metadata reads.
      * Fixes from Hans and Javier to pblk recovery and write path.
      * Fix from Hua Su to fix a race condition in the pblk recovery
        code.
      * Scan optimization added to pblk recovery from Zhoujie.
      * Small geometry cleanup from me.

   - Conversion of the last few drivers that used the legacy path to
     blk-mq (me)

   - Removal of legacy IO path in SCSI (me, Christoph)

   - Removal of legacy IO stack and schedulers (me)

   - Support for much better polling, now without interrupts at all.
     blk-mq adds support for multiple queue maps, which enables us to
     have a map per type. This in turn enables nvme to have separate
     completion queues for polling, which can then be interrupt-less.
     Also means we're ready for async polled IO, which is hopefully
     coming in the next release.

   - Killing of (now) unused block exports (Christoph)

   - Unification of the blk-rq-qos and blk-wbt wait handling (Josef)

   - Support for zoned testing with null_blk (Masato)

   - sx8 conversion to per-host tag sets (Christoph)

   - IO priority improvements (Damien)

   - mq-deadline zoned fix (Damien)

   - Ref count blkcg series (Dennis)

   - Lots of blk-mq improvements and speedups (me)

   - sbitmap scalability improvements (me)

   - Make core inflight IO accounting per-cpu (Mikulas)

   - Export timeout setting in sysfs (Weiping)

   - Cleanup the direct issue path (Jianchao)

   - Export blk-wbt internals in block debugfs for easier debugging
     (Ming)

   - Lots of other fixes and improvements"

* tag 'for-4.21/block-20181221' of git://git.kernel.dk/linux-block: (364 commits)
  kyber: use sbitmap add_wait_queue/list_del wait helpers
  sbitmap: add helpers for add/del wait queue handling
  block: save irq state in blkg_lookup_create()
  dm: don't reuse bio for flushes
  nvme-pci: trace SQ status on completions
  nvme-rdma: implement polling queue map
  nvme-fabrics: allow user to pass in nr_poll_queues
  nvme-fabrics: allow nvmf_connect_io_queue to poll
  nvme-core: optionally poll sync commands
  block: make request_to_qc_t public
  nvme-tcp: fix spelling mistake "attepmpt" -> "attempt"
  nvme-tcp: fix endianess annotations
  nvmet-tcp: fix endianess annotations
  nvme-pci: refactor nvme_poll_irqdisable to make sparse happy
  nvme-pci: only set nr_maps to 2 if poll queues are supported
  nvmet: use a macro for default error location
  nvmet: fix comparison of a u16 with -1
  blk-mq: enable IO poll if .nr_queues of type poll > 0
  blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
  blk-mq: skip zero-queue maps in blk_mq_map_swqueue
  ...
2018-12-28 13:19:59 -08:00
Minchan Kim bb416d18b8 zram: writeback throttle
If there are lots of write IO with flash device, it could have a
wearout problem of storage. To overcome the problem, admin needs
to design write limitation to guarantee flash health
for entire product life.

This patch creates a new knob "writeback_limit" for zram.

writeback_limit's default value is 0 so that it doesn't limit
any writeback. If admin want to measure writeback count in a
certain period, he could know it via /sys/block/zram0/bd_stat's
3rd column.

If admin want to limit writeback as per-day 400M, he could do it
like below.

	MB_SHIFT=20
	4K_SHIFT=12
	echo $((400<<MB_SHIFT>>4K_SHIFT)) > \
		/sys/block/zram0/writeback_limit.

If admin want to allow further write again, he could do it like below

	echo 0 > /sys/block/zram0/writeback_limit

If admin want to see remaining writeback budget,

	cat /sys/block/zram0/writeback_limit

The writeback_limit count will reset whenever you reset zram (e.g., system
reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of writeback
happened until you reset the zram to allocate extra writeback budget in
next setting is user's job.

[minchan@kernel.org: v4]
  Link: http://lkml.kernel.org/r/20181203024045.153534-8-minchan@kernel.org
Link: http://lkml.kernel.org/r/20181127055429.251614-8-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:49 -08:00
Minchan Kim 23eddf39b2 zram: add bd_stat statistics
bd_stat represents things that happened in the backing device.  Currently
it supports bd_counts, bd_reads and bd_writes which are helpful to
understand wearout of flash and memory saving.

[minchan@kernel.org: v4]
  Link: http://lkml.kernel.org/r/20181203024045.153534-7-minchan@kernel.org
Link: http://lkml.kernel.org/r/20181127055429.251614-7-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:49 -08:00
Minchan Kim a939888ec3 zram: support idle/huge page writeback
Add a new feature "zram idle/huge page writeback".  In the zram-swap use
case, zram usually has many idle/huge swap pages.  It's pointless to keep
them in memory (ie, zram).

To solve this problem, this feature introduces idle/huge page writeback to
the backing device so the goal is to save more memory space on embedded
systems.

Normal sequence to use idle/huge page writeback feature is as follows,

while (1) {
        # mark allocated zram slot to idle
        echo all > /sys/block/zram0/idle
        # leave system working for several hours
        # Unless there is no access for some blocks on zram,
	# they are still IDLE marked pages.

        echo "idle" > /sys/block/zram0/writeback
	or/and
	echo "huge" > /sys/block/zram0/writeback
        # write the IDLE or/and huge marked slot into backing device
	# and free the memory.
}

Per the discussion at
https://lore.kernel.org/lkml/20181122065926.GG3441@jagdpanzerIV/T/#u,

This patch removes direct incommpressibe page writeback feature
(d2afd25114f4 ("zram: write incompressible pages to backing device")).

Below concerns from Sergey:
== &< ==

"IDLE writeback" is superior to "incompressible writeback".

"incompressible writeback" is completely unpredictable and uncontrollable;
it depens on data patterns and compression algorithms.  While "IDLE
writeback" is predictable.

I even suspect, that, *ideally*, we can remove "incompressible writeback".
"IDLE pages" is a super set which also includes "incompressible" pages.
So, technically, we still can do "incompressible writeback" from "IDLE
writeback" path; but a much more reasonable one, based on a page idling
period.

I understand that you want to keep "direct incompressible writeback"
around.  ZRAM is especially popular on devices which do suffer from flash
wearout, so I can see "incompressible writeback" path becoming a dead
code, long term.

== &< ==

Below concerns from Minchan:
== &< ==

My concern is if we enable CONFIG_ZRAM_WRITEBACK in this implementation,
both hugepage/idlepage writeck will turn on.  However someuser want to
enable only idlepage writeback so we need to introduce turn on/off knob
for hugepage or new CONFIG_ZRAM_IDLEPAGE_WRITEBACK for those usecase.  I
don't want to make it complicated *if possible*.

Long term, I imagine we need to make VM aware of new swap hierarchy a
little bit different with as-is.  For example, first high priority swap
can return -EIO or -ENOCOMP, swap try to fallback to next lower priority
swap device.  With that, hugepage writeback will work tranparently.

So we could regard it as regression because incompressible pages doesn't
go to backing storage automatically.  Instead, user should do it via "echo
huge" > /sys/block/zram/writeback" manually.

== &< ==

Link: http://lkml.kernel.org/r/20181127055429.251614-6-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:49 -08:00
Minchan Kim e82592c4fd zram: introduce ZRAM_IDLE flag
To support idle page writeback with upcoming patches, this patch
introduces a new ZRAM_IDLE flag.

Userspace can mark zram slots as "idle" via
	"echo all > /sys/block/zramX/idle"
which marks every allocated zram slot as ZRAM_IDLE.
User could see it by /sys/kernel/debug/zram/zram0/block_state.

          300    75.033841 ...i
          301    63.806904 s..i
          302    63.806919 ..hi

Once there is IO for the slot, the mark will be disappeared.

	  300    75.033841 ...
          301    63.806904 s..i
          302    63.806919 ..hi

Therefore, 300th block is idle zpage. With this feature,
user can how many zram has idle pages which are waste of memory.

Link: http://lkml.kernel.org/r/20181127055429.251614-5-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:49 -08:00
Linus Torvalds d8924c0d76 Device properties framework updates for 4.21-rc1
- Introduce "software nodes", analogous to the DT and ACPI firmware
    nodes except that they can be created by kernel code, in order to
    complement fwnodes representing real firmware nodes when they are
    incomplete (for example missing device properties) and to supply
    the primary fwnode when the firmware lacks hardware description
    for a device completely, and replace the "property_set" struct
    fwnode_handle type with software nodes (Heikki Krogerus).
 
  - Clean up the just introduced software nodes support and fix a commet
    in the graph-handling code (Colin Ian King, Marco Felsch).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcHMUXAAoJEILEb/54YlRxqJIP/2bDrVQphjXoZWC0/BAOjAMO
 1WIaS+LI1VpvnnSxVQllfGHSI4voKiF1fcnKMui/VjCaH/BYhh98RJtCoZ72fHHt
 WlKlMhNm2nQ5XibZP1Ge9u2NDkfebgOLTHkAam/7dMwxKBzxbK1ytcuggMnL2HRY
 9wv6N/y1iLmfFABE0WEV/a3715i5MmBxC5ApIBvjK4tRv+KpYaJ7i03+4qGxpnHY
 hGvQE0b49hJkBGwVeoEPz/3HpsJ1WYBj4Oi7UyVa8A/GyWaRdwLtUVmidBua4Dah
 1eVjpjj6vreuHRwpQbMPkMecSsdon7EzsoyWklAGKPXuA5GKmvoDoLu66DORH93O
 a3h60vq5SqsVhqJhzJpN7SZLAeGdQymSW0aABpKotKIrNVZMkWTIyxvPSw3PKnF0
 3dhgv1QUktKteuCLFfuLqp+vHbPEauOul4iPwElpno6LJ1xzVaf/sNXoHPJwBOs9
 LYHUsB8G9L3Y7qvDn4RpR3zYChFE6/J53U8B4P0g+lqV1nxz28ov00VwZJihdpcz
 wzj+lF53Tzf4gMiaIdjSsrWMtx7lNcAowYsbdb8nyng555HMaW/ROzw1gv/GB5hp
 2Iaru6+J4QGbwAaLlOVeGY0TenCJUuF+tF+ufVHujceehjAisDzF+zev0VivRv26
 UwRSmhd/g1tPsoeJVhQN
 =Z3Zj
 -----END PGP SIGNATURE-----

Merge tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "This introduces 'software nodes' that are analogous to the DT and ACPI
  firmware nodes except that they can be created by drivers themselves
  and do a couple of assorted cleanups.

  Specifics:

   - Introduce "software nodes", analogous to the DT and ACPI firmware
     nodes except that they can be created by kernel code, in order to
     complement fwnodes representing real firmware nodes when they are
     incomplete (for example missing device properties) and to supply
     the primary fwnode when the firmware lacks hardware description for
     a device completely, and replace the "property_set" struct
     fwnode_handle type with software nodes (Heikki Krogerus).

   - Clean up the just introduced software nodes support and fix a
     commet in the graph-handling code (Colin Ian King, Marco Felsch)"

* tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: fix fwnode_graph_get_next_endpoint() documentation
  drivers: base: swnode: remove need for a temporary string for the node name
  device property: Remove struct property_set
  device property: Move device_add_properties() to swnode.c
  drivers: base: Introducing software nodes to the firmware node framework
  ACPI / glue: Add acpi_platform_notify() function
  drivers core: Prepare support for multiple platform notifications
  driver core: platform: Remove duplicated device_remove_properties() call
2018-12-25 15:01:46 -08:00
Linus Torvalds 1e2af254ef Power management updates for 4.21-rc1
- Add sysadmin documentation for cpuidle (Rafael Wysocki).
 
  - Make it possible to specify a cpuidle governor from kernel
    command line, add new cpuidle state sysfs attributes for
    governor evaluation, and improve the "polling" idle state
    handling (Rafael Wysocki).
 
  - Fix the handling of the "required-opps" DT property in the
    operating performance points (OPP) framework, improve the
    integration of it with the generic power domains (genpd)
    framework, improve the handling of performance states in
    them and clean up the idle states vs performance states
    separation in genpd (Viresh Kumar, Ulf Hansson).
 
  - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using
    a hardware engine to control CPU frequency transitions along
    with DT bindings for it (Taniya Das).
 
  - Fix an intel_pstate driver issue related to CPU offline and
    update the documentation of it (Srinivas Pandruvada).
 
  - Clean up the imx6q cpufreq driver (Anson Huang).
 
  - Add SPDX license IDs to cpufreq schedutil governor files (Daniel
    Lezcano).
 
  - Switch over the runtime PM framework to using high-res timers
    for device autosuspend to allow the control of it to be more
    precise (Vincent Guittot).
 
  - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
    don't prevent the system from reaching the target low-power state
    and simplify the suspend-to-idle handling on ACPI platforms
    without full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).
 
  - Add system-wide suspend and resume support to the devfreq
    framework (Lukasz Luba).
 
  - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
    add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
    Thomas Meyer).
 
  - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
    macro in some places, fix some DT node refcount leaks, and do
    some other janitorial cleanups (Yangtao Li).
 
  - Update the cpupower, intel_pstate_tracer and turbosat utilities
    (Abhishek Goel, Doug Smythies, Len Brown).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcHMOKAAoJEILEb/54YlRxtHUP/i4MePJYYIab3dW2WMtFC9wP
 K3Z/qva5uiEampEZbjlATlqUrd0XxMU2YfkJ9N08rJ33bKnBi8wNp0BPiwZjYs77
 lwjuEQ0Depz85LJ7W+dOjjxucdYv/H/ZXVK7VF2sfAfbpEbD7+RNTTa1+zdoh3Yq
 AiCKH/fU+Yc+wOMcXxj8vWe8EecsuYfZUC/p/yJDv1uMaUyHTgiCAyE/S2JzvZcQ
 mGFmly8b1hSkvCPOsipq/O8HUDtve8sOyZvFO5Up5BiNbDyhEHS4tDiKipbKgc/J
 ljzP3pVATlnEZLFxyqg32PhuhwYB0MtN3+BZGTjLelqTmElTx9A2JvWBVk4jgaC9
 ps97nUz1HO2dr1ERDyMnDtZFHFp24LVQcIB2RKfj/lqSq94IWQphmNZVF219jdyd
 68wR2/fnkzTeDhJ1JvcJb5XKrrd/wq3IKfCJAd9AXVxy27BrCB0ryTsQFvXJ+AzV
 n603yf3Sb7QaIC7Mofhj2WT3N/BQnzMzZhBJRA3EeX/Gd7TkLtQuvvHZQzcGbgOY
 GGm6WKGWgEUp3YIJIz5ihUuy9SUETCvR2PqGZfo+Wmc7F77j/5FY5ejRt3llkeFn
 8KaVQH9YIRjffBr1nclXMHKaRtf/JVB9SgVmDvA6Sh3Ac5/KBy3+IgwiJ2z5dunr
 tYV/QJ22r15xEBITTSJ7
 =WhM8
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add sysadmin documentation for cpuidle, extend the cpuidle
  subsystem somewhat, improve the handling of performance states in the
  generic power domains (genpd) and operating performance points (OPP)
  frameworks, add a new cpufreq driver for Qualcomm SoCs, update some
  other cpufreq drivers, switch over the runtime PM framework to using
  high-res timers for device autosuspend, fix a problem with
  suspend-to-idle on ACPI-based platforms, add system-wide suspend and
  resume handling to the devfreq framework, do some janitorial cleanups
  all over and update some utilities.

  Specifics:

   - Add sysadmin documentation for cpuidle (Rafael Wysocki).

   - Make it possible to specify a cpuidle governor from kernel command
     line, add new cpuidle state sysfs attributes for governor
     evaluation, and improve the "polling" idle state handling (Rafael
     Wysocki).

   - Fix the handling of the "required-opps" DT property in the
     operating performance points (OPP) framework, improve the
     integration of it with the generic power domains (genpd) framework,
     improve the handling of performance states in them and clean up the
     idle states vs performance states separation in genpd (Viresh
     Kumar, Ulf Hansson).

   - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a
     hardware engine to control CPU frequency transitions along with DT
     bindings for it (Taniya Das).

   - Fix an intel_pstate driver issue related to CPU offline and update
     the documentation of it (Srinivas Pandruvada).

   - Clean up the imx6q cpufreq driver (Anson Huang).

   - Add SPDX license IDs to cpufreq schedutil governor files (Daniel
     Lezcano).

   - Switch over the runtime PM framework to using high-res timers for
     device autosuspend to allow the control of it to be more precise
     (Vincent Guittot).

   - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
     don't prevent the system from reaching the target low-power state
     and simplify the suspend-to-idle handling on ACPI platforms without
     full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).

   - Add system-wide suspend and resume support to the devfreq framework
     (Lukasz Luba).

   - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
     add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
     Thomas Meyer).

   - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
     macro in some places, fix some DT node refcount leaks, and do some
     other janitorial cleanups (Yangtao Li).

   - Update the cpupower, intel_pstate_tracer and turbosat utilities
     (Abhishek Goel, Doug Smythies, Len Brown)"

* tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
  PM-runtime: Switch autosuspend over to using hrtimers
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
  dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
  ACPI: PM: Loop in full LPS0 mode only
  ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
  tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
  tools/power turbostat: consolidate duplicate model numbers
  tools/power turbostat: fix goldmont C-state limit decoding
  PM / Domains: Propagate performance state updates
  PM / Domains: Factorize dev_pm_genpd_set_performance_state()
  PM / Domains: Save OPP table pointer in genpd
  OPP: Don't return 0 on error from of_get_required_opp_performance_state()
  OPP: Add dev_pm_opp_xlate_performance_state() helper
  OPP: Improve _find_table_of_opp_np()
  PM / Domains: Make genpd performance states orthogonal to the idlestates
  PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
  cpuidle: Add 'above' and 'below' idle state metrics
  PM / AVS: SmartReflex: Switch to SPDX Licence ID
  PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
  ...
2018-12-25 13:47:41 -08:00