Commit Graph

2239 Commits

Author SHA1 Message Date
Linus Torvalds f1d702487b Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A smaller collection of fixes for the block core that would be nice to
  have in -rc2.  This pull request contains:

   - Fixes for races in the wait/wakeup logic used in blk-mq from
     Alexander.  No issues have been observed, but it is definitely a
     bit flakey currently.  Alternatively, we may drop the cyclic
     wakeups going forward, but that needs more testing.

   - Some cleanups from Christoph.

   - Fix for an oops in null_blk if queue_mode=1 and softirq completions
     are used.  From me.

   - A fix for a regression caused by the chunk size setting.  It
     inadvertently used max_hw_sectors instead of max_sectors, which is
     incorrect, and causes hangs on btrfs multi-disk setups (where hw
     sectors apparently isn't set).  From me.

   - Removal of WQ_POWER_EFFICIENT in the kblockd creation.  This was a
     recent addition as well, but it actually breaks blk-mq which relies
     on strict scheduling.  If the workqueue power_efficient mode is
     turned on, this breaks blk-mq.  From Matias.

   - null_blk module parameter description fix from Mike"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: bitmap tag: fix races in bt_get() function
  blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt
  blk-mq: bitmap tag: fix races on shared ::wake_index fields
  block: blk_max_size_offset() should check ->max_sectors
  null_blk: fix softirq completions for queue_mode == 1
  blk-mq: merge blk_mq_drain_queue and __blk_mq_drain_queue
  blk-mq: properly drain stopped queues
  block: remove WQ_POWER_EFFICIENT from kblockd
  null_blk: fix name and description of 'queue_mode' module parameter
  block: remove elv_abort_queue and blk_abort_flushes
2014-06-19 17:56:43 -10:00
Alexander Gordeev 86fb5c56cf blk-mq: bitmap tag: fix races in bt_get() function
This update fixes few issues in bt_get() function:

- list_empty(&wait.task_list) check is not protected;

- was_empty check is always true which results in *every* thread
  entering the loop resets bt_wait_state::wait_cnt counter rather
  than every bt->wake_cnt'th thread;

- 'bt_wait_state::wait_cnt' counter update is redundant, since
  it also gets reset in bt_clear_tag() function;

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-17 22:13:08 -07:00
Alexander Gordeev 2971c35f35 blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt
This piece of code in bt_clear_tag() function is racy:

	bs = bt_wake_ptr(bt);
	if (bs && atomic_dec_and_test(&bs->wait_cnt)) {
		atomic_set(&bs->wait_cnt, bt->wake_cnt);
 		wake_up(&bs->wait);
	}

Since nothing prevents bt_wake_ptr() from returning the very
same 'bs' address on multiple CPUs, the following scenario is
possible:

    CPU1                                CPU2
    ----                                ----

0.  bs = bt_wake_ptr(bt);               bs = bt_wake_ptr(bt);
1.  atomic_dec_and_test(&bs->wait_cnt)
2.                                      atomic_dec_and_test(&bs->wait_cnt)
3.  atomic_set(&bs->wait_cnt, bt->wake_cnt);

If the decrement in [1] yields zero then for some amount of time
the decrement in [2] results in a negative/overflow value, which
is not expected. The follow-up assignment in [3] overwrites the
invalid value with the batch value (and likely prevents the issue
from being severe) which is still incorrect and should be a lesser.

Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-17 22:13:05 -07:00
Alexander Gordeev 8537b12034 blk-mq: bitmap tag: fix races on shared ::wake_index fields
Fix racy updates of shared blk_mq_bitmap_tags::wake_index
and blk_mq_hw_ctx::wake_index fields.

Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-17 22:12:35 -07:00
Linus Torvalds b55b390202 Merge git://git.infradead.org/users/willy/linux-nvme
Pull NVMe update from Matthew Wilcox:
 "Mostly bugfixes again for the NVMe driver.  I'd like to call out the
  exported tracepoint in the block layer; I believe Keith has cleared
  this with Jens.

  We've had a few reports from people who're really pounding on NVMe
  devices at scale, hence the timeout changes (and new module
  parameters), hotplug cpu deadlock, tracepoints, and minor performance
  tweaks"

[ Jens hadn't seen that tracepoint thing, but is ok with it - it will
  end up going away when mq conversion happens ]

* git://git.infradead.org/users/willy/linux-nvme: (22 commits)
  NVMe: Fix START_STOP_UNIT Scsi->NVMe translation.
  NVMe: Use Log Page constants in SCSI emulation
  NVMe: Define Log Page constants
  NVMe: Fix hot cpu notification dead lock
  NVMe: Rename io_timeout to nvme_io_timeout
  NVMe: Use last bytes of f/w rev SCSI Inquiry
  NVMe: Adhere to request queue block accounting enable/disable
  NVMe: Fix nvme get/put queue semantics
  NVMe: Delete NVME_GET_FEAT_TEMP_THRESH
  NVMe: Make admin timeout a module parameter
  NVMe: Make iod bio timeout a parameter
  NVMe: Prevent possible NULL pointer dereference
  NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD)
  NVMe: Update data structures for NVMe 1.2
  NVMe: Enable BUILD_BUG_ON checks
  NVMe: Update namespace and controller identify structures to the 1.1a spec
  NVMe: Flush with data support
  NVMe: Configure support for block flush
  NVMe: Add tracepoints
  NVMe: Protect against badly formatted CQEs
  ...
2014-06-15 15:58:03 -10:00
Christoph Hellwig 95ed068165 blk-mq: merge blk_mq_drain_queue and __blk_mq_drain_queue
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-13 12:17:40 -06:00
Christoph Hellwig 8f5280f4ee blk-mq: properly drain stopped queues
If we need to drain a queue we need to run all queues, even if they
are marked stopped to make sure the driver has a chance to error out
on all queued requests.

This fixes surprise removal with scsi-mq.

Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-13 12:17:38 -06:00
Matias Bjørling 28747fcd22 block: remove WQ_POWER_EFFICIENT from kblockd
blk-mq issues async requests through kblockd. To issue a work request on
a specific CPU, kblockd_schedule_delayed_work_on is used. However, the
specific CPU choice may not be honored, if the power_efficient option
for workqueues is set. blk-mq requires that we have strict per-cpu
scheduling, so it wont work properly if kblockd is marked
POWER_EFFICIENT and power_efficient is set.

Remove the kblockd WQ_POWER_EFFICIENT flag to prevent this behavior.
This essentially reverts part of commit 695588f945, which added
the WQ_POWER_EFFICIENT marker to kblockd.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-11 15:53:39 -06:00
Christoph Hellwig 2940474af7 block: remove elv_abort_queue and blk_abort_flushes
elv_abort_queue has no callers, and blk_abort_flushes is only called by
elv_abort_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-11 15:31:21 -06:00
Linus Torvalds 23d4ed53b7 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
 "Final small batch of fixes to be included before -rc1.  Some general
  cleanups in here as well, but some of the blk-mq fixes we need for the
  NVMe conversion and/or scsi-mq.  The pull request contains:

   - Support for not merging across a specified "chunk size", if set by
     the driver.  Some NVMe devices perform poorly for IO that crosses
     such a chunk, so we need to support it generically as part of
     request merging avoid having to do complicated split logic.  From
     me.

   - Bump max tag depth to 10Ki tags.  Some scsi devices have a huge
     shared tag space.  Before we failed with EINVAL if a too large tag
     depth was specified, now we truncate it and pass back the actual
     value.  From me.

   - Various blk-mq rq init fixes from me and others.

   - A fix for enter on a dying queue for blk-mq from Keith.  This is
     needed to prevent oopsing on hot device removal.

   - Fixup for blk-mq timer addition from Ming Lei.

   - Small round of performance fixes for mtip32xx from Sam Bradshaw.

   - Minor stack leak fix from Rickard Strandqvist.

   - Two __init annotations from Fabian Frederick"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: add __init to blkcg_policy_register
  block: add __init to elv_register
  block: ensure that bio_add_page() always accepts a page for an empty bio
  blk-mq: add timer in blk_mq_start_request
  blk-mq: always initialize request->start_time
  block: blk-exec.c: Cleaning up local variable address returnd
  mtip32xx: minor performance enhancements
  blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init()
  blk-mq: don't allow queue entering for a dying queue
  blk-mq: bump max tag depth to 10K tags
  block: add blk_rq_set_block_pc()
  block: add notion of a chunk size for request merging
2014-06-11 08:41:17 -07:00
Fabian Frederick a2d445d440 block: add __init to blkcg_policy_register
blkcg_policy_register is only called by
__init functions:

__init cfq_init
__init throtl_init

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-10 13:13:12 -06:00
Fabian Frederick b5097e956a block: add __init to elv_register
elv_register is only called by elevator init functions:

__init cfq_init
__init deadline_init
__init noop_init

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-10 13:13:11 -06:00
Jens Axboe 58a4915ad2 block: ensure that bio_add_page() always accepts a page for an empty bio
With commit 762380ad93 added support for chunk sizes and no merging
across them, it broke the rule of always allowing adding of a single
page to an empty bio. So relax the restriction a bit to allow for that,
similarly to what we have always done.

This fixes a crash with mkfs.xfs and 512b sector sizes on NVMe.

Reported-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-10 12:53:56 -06:00
Linus Torvalds 14208b0ec5 Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "A lot of activities on cgroup side.  Heavy restructuring including
  locking simplification took place to improve the code base and enable
  implementation of the unified hierarchy, which currently exists behind
  a __DEVEL__ mount option.  The core support is mostly complete but
  individual controllers need further work.  To explain the design and
  rationales of the the unified hierarchy

        Documentation/cgroups/unified-hierarchy.txt

  is added.

  Another notable change is css (cgroup_subsys_state - what each
  controller uses to identify and interact with a cgroup) iteration
  update.  This is part of continuing updates on css object lifetime and
  visibility.  cgroup started with reference count draining on removal
  way back and is now reaching a point where csses behave and are
  iterated like normal refcnted objects albeit with some complexities to
  allow distinguishing the state where they're being deleted.  The css
  iteration update isn't taken advantage of yet but is planned to be
  used to simplify memcg significantly"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (77 commits)
  cgroup: disallow disabled controllers on the default hierarchy
  cgroup: don't destroy the default root
  cgroup: disallow debug controller on the default hierarchy
  cgroup: clean up MAINTAINERS entries
  cgroup: implement css_tryget()
  device_cgroup: use css_has_online_children() instead of has_children()
  cgroup: convert cgroup_has_live_children() into css_has_online_children()
  cgroup: use CSS_ONLINE instead of CGRP_DEAD
  cgroup: iterate cgroup_subsys_states directly
  cgroup: introduce CSS_RELEASED and reduce css iteration fallback window
  cgroup: move cgroup->serial_nr into cgroup_subsys_state
  cgroup: link all cgroup_subsys_states in their sibling lists
  cgroup: move cgroup->sibling and ->children into cgroup_subsys_state
  cgroup: remove cgroup->parent
  device_cgroup: remove direct access to cgroup->children
  memcg: update memcg_has_children() to use css_next_child()
  memcg: remove tasks/children test from mem_cgroup_force_empty()
  cgroup: remove css_parent()
  cgroup: skip refcnting on normal root csses and cgrp_dfl_root self css
  cgroup: use cgroup->self.refcnt for cgroup refcnting
  ...
2014-06-09 15:03:33 -07:00
Ming Lei 2b8393b43e blk-mq: add timer in blk_mq_start_request
This way will become consistent with non-mq case, also
avoid to update rq->deadline twice for mq.

The comment said: "We do this early, to ensure we are on
the right CPU.", but no percpu stuff is used in blk_add_timer(),
so it isn't necessary. Even when inserting from plug list, there
is no such guarantee at all.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-09 10:20:06 -06:00
Jens Axboe 3ee3237239 blk-mq: always initialize request->start_time
The blk-mq core only initializes this if io stats are enabled, since
blk-mq only reads the field in that case. But drivers could
potentially use it internally, so ensure that we always set it to
the current time when the request is allocated.

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-09 09:36:53 -06:00
Rickard Strandqvist de83953f9d block: blk-exec.c: Cleaning up local variable address returnd
Address of local variable assigned to a function parameter

This was partly found using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-08 19:51:31 -06:00
Mitchel Humpherys b1de0d139c mm: convert some level-less printks to pr_*
printk is meant to be used with an associated log level.  There are some
instances of printk scattered around the mm code where the log level is
missing.  Add a log level and adhere to suggestions by
scripts/checkpatch.pl by moving to the pr_* macros.

Also add the typical pr_fmt definition so that print statements can be
easily traced back to the modules where they occur, correlated one with
another, etc.  This will require the removal of some (now redundant)
prefixes on a few print statements.

Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:18 -07:00
Jens Axboe f6be4fb4bc blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init()
It'll be used in blk_mq_start_request() to set a potential timeout
for the request, so clear it to zero at alloc time to ensure that
we know if someone has set it or not.

Fixes random early timeouts on NVMe testing.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-06 11:05:25 -06:00
Keith Busch 3b632cf0ea blk-mq: don't allow queue entering for a dying queue
If the queue is going away, don't let new allocs or queueing
happen on it. Go through the normal wait process, and exit with
ENODEV in that case.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-06 10:40:03 -06:00
Jens Axboe a4391c6465 blk-mq: bump max tag depth to 10K tags
For some scsi-mq cases, the tag map can be huge. So increase the
max number of tags we support.

Additionally, don't fail with EINVAL if a user requests too many
tags. Warn that the tag depth has been adjusted down, and store
the new value inside the tag_set passed in.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-06 08:04:46 -06:00
Jens Axboe f27b087b81 block: add blk_rq_set_block_pc()
With the optimizations around not clearing the full request at alloc
time, we are leaving some of the needed init for REQ_TYPE_BLOCK_PC
up to the user allocating the request.

Add a blk_rq_set_block_pc() that sets the command type to
REQ_TYPE_BLOCK_PC, and properly initializes the members associated
with this type of request. Update callers to use this function instead
of manipulating rq->cmd_type directly.

Includes fixes from Christoph Hellwig <hch@lst.de> for my half-assed
attempt.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-06 07:57:37 -06:00
Jens Axboe 762380ad93 block: add notion of a chunk size for request merging
Some drivers have different limits on what size a request should
optimally be, depending on the offset of the request. Similar to
dividing a device into chunks. Add a setting that allows the driver
to inform the block layer of such a chunk size. The block layer will
then prevent merging across the chunks.

This is needed to optimally support NVMe with a non-zero stripe size.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-05 13:38:39 -06:00
Ming Lei 14b83e172f block: mq flush: clear flush_rq's tag in flush_end_io()
blk_mq_tag_to_rq() needs to be able to tell if it should return
the original request, or the flush request if we are doing a flush
sequence. Clear the flush tag when IO completes for a flush, since
that is what we are comparing against.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-04 10:40:16 -06:00
Jens Axboe 0e62f51f87 blk-mq: let blk_mq_tag_to_rq() take blk_mq_tags as the main parameter
We currently pass in the hardware queue, and get the tags from there.
But from scsi-mq, with a shared tag space, it's a lot more convenient
to pass in the blk_mq_tags instead as the hardware queue isn't always
directly available. So instead of having to re-map to a given
hardware queue from rq->mq_ctx, just pass in the tags structure.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-04 10:23:49 -06:00
Jens Axboe f899fed442 blk-mq: fix regression from commit 624dbe4754
When the code was collapsed to avoid duplication, the recent patch
for ensuring that a queue is idled before free was dropped, which was
added by commit 19c5d84f14.

Add back the blk_mq_tag_idle(), to ensure we don't leak a reference
to an active queue when it is freed.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-04 09:11:53 -06:00
Jens Axboe ff87bcec19 blk-mq: handle NULL req return from blk_map_request in single queue mode
blk_mq_map_request() can return NULL if we fail entering the queue
(dying, or removed), in which case it has already ended IO on the
bio. So nothing more to do, except just return.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:39 -06:00
Ming Lei e6cdb0929f blk-mq: fix sparse warning on missed __percpu annotation
'struct blk_mq_ctx' is  __percpu, so add the annotation
and fix the sparse warning reported from Fengguang:

	[block:for-linus 2/3] block/blk-mq.h:75:16: sparse: incorrect
	type in initializer (different address spaces)

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:39 -06:00
Ming Lei cb96a42cc1 blk-mq: fix schedule from atomic context
blk_mq_put_ctx() has to be called before io_schedule() in
bt_get().

This patch fixes the problem by taking similar approach from
percpu_ida allocation for the situation.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:39 -06:00
Ming Lei 1aecfe4887 blk-mq: move blk_mq_get_ctx/blk_mq_put_ctx to mq private header
The blk-mq tag code need these helpers.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:38 -06:00
Linus Torvalds 776edb5931 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...
2014-06-03 12:57:53 -07:00
Linus Torvalds 80081ec309 Merge branch 'for-3.16/drivers' of git://git.kernel.dk/linux-block into next
Pull block driver changes from Jens Axboe:
 "Now that the core bits are in, here's the pull request for the driver
  related changes for 3.16.  Nothing out of the ordinary here, mostly
  business as usual.  There are a few pulls of for-3.16/core into this
  branch, which were done when the blk-mq was modified after the
  mtip32xx conversion was put in.

  The pull request contains:

   - skd and cciss converted to use pci_enable_msix_exact().  From
     Alexander Gordeev.

   - A few mtip32xx fixes from Asai @ Micron.

   - The conversion of mtip32xx from make_request_fn to blk-mq, and a
     later small fix for that conversion on quiescing for non-queued IO.
     From me.

   - A fix for bsg to use an exported function to check whether this
     driver is request based or not.  Needed updating for blk-mq, which
     is request based, but does not have a request_fn hook.  From me.

   - Small floppy bug fix from Jiri.

   - A series of cleanups for the cdrom uniform layer from Joe Perches.
     Gets rid of various old ugly macros, making the code conform more
     to the modern coding style.

   - A series of patches for drbd from the drbd crew (Lars Ellenberg and
     Philipp Reisner).

   - A use-after-free fix for null_blk from Ming Lei.

   - Also from Ming Lei is a performance patch for virtio-blk, which can
     net us a 3x win on kvm platforms where world notification is
     expensive.

   - Ming Lei also fixed a stall issue in virtio-blk, due to a race
     between queue start/stop and resource limits.

   - A small batch of fixes for xen-blk{back,front} from Olaf Hering and
     Valentin Priescu"

* 'for-3.16/drivers' of git://git.kernel.dk/linux-block: (54 commits)
  block: virtio_blk: don't hold spin lock during world switch
  xen-blkback: defer freeing blkif to avoid blocking xenwatch
  xen blkif.h: fix comment typo in discard-alignment
  xen/blkback: disable discard feature if requested by toolstack
  xen-blkfront: remove type check from blkfront_setup_discard
  floppy: do not corrupt bio.bi_flags when reading block 0
  mtip32xx: move error handling to service thread
  virtio_blk: fix race between start and stop queue
  mtip32xx: stop block hardware queues before quiescing IO
  mtip32xx: blk_mq_init_queue() returns an ERR_PTR
  mtip32xx: convert to use blk-mq
  cdrom: Remove unnecessary prototype for cdrom_get_disc_info
  cdrom: Remove unnecessary prototype for cdrom_mrw_exit
  cdrom: Remove cdrom_count_tracks prototype
  cdrom: Remove cdrom_get_next_writeable prototype
  cdrom: Remove cdrom_get_last_written prototype
  cdrom: Move mmc_ioctls above cdrom_ioctl to remove unnecessary prototype
  cdrom: Remove unnecessary sanitize_format prototype
  cdrom: Remove unnecessary check_for_audio_disc prototype
  cdrom: Remove prototype for open_for_data
  ...
2014-06-02 13:57:01 -07:00
Linus Torvalds 681a289548 Merge branch 'for-3.16/core' of git://git.kernel.dk/linux-block into next
Pull block core updates from Jens Axboe:
 "It's a big(ish) round this time, lots of development effort has gone
  into blk-mq in the last 3 months.  Generally we're heading to where
  3.16 will be a feature complete and performant blk-mq.  scsi-mq is
  progressing nicely and will hopefully be in 3.17.  A nvme port is in
  progress, and the Micron pci-e flash driver, mtip32xx, is converted
  and will be sent in with the driver pull request for 3.16.

  This pull request contains:

   - Lots of prep and support patches for scsi-mq have been integrated.
     All from Christoph.

   - API and code cleanups for blk-mq from Christoph.

   - Lots of good corner case and error handling cleanup fixes for
     blk-mq from Ming Lei.

   - A flew of blk-mq updates from me:

     * Provide strict mappings so that the driver can rely on the CPU
       to queue mapping.  This enables optimizations in the driver.

     * Provided a bitmap tagging instead of percpu_ida, which never
       really worked well for blk-mq.  percpu_ida relies on the fact
       that we have a lot more tags available than we really need, it
       fails miserably for cases where we exhaust (or are close to
       exhausting) the tag space.

     * Provide sane support for shared tag maps, as utilized by scsi-mq

     * Various fixes for IO timeouts.

     * API cleanups, and lots of perf tweaks and optimizations.

   - Remove 'buffer' from struct request.  This is ancient code, from
     when requests were always virtually mapped.  Kill it, to reclaim
     some space in struct request.  From me.

   - Remove 'magic' from blk_plug.  Since we store these on the stack
     and since we've never caught any actual bugs with this, lets just
     get rid of it.  From me.

   - Only call part_in_flight() once for IO completion, as includes two
     atomic reads.  Hopefully we'll get a better implementation soon, as
     the part IO stats are now one of the more expensive parts of doing
     IO on blk-mq.  From me.

   - File migration of block code from {mm,fs}/ to block/.  This
     includes bio.c, bio-integrity.c, bounce.c, and ioprio.c.  From me,
     from a discussion on lkml.

  That should describe the meat of the pull request.  Also has various
  little fixes and cleanups from Dave Jones, Shaohua Li, Duan Jiong,
  Fengguang Wu, Fabian Frederick, Randy Dunlap, Robert Elliott, and Sam
  Bradshaw"

* 'for-3.16/core' of git://git.kernel.dk/linux-block: (100 commits)
  blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
  blk-mq: remember to start timeout handler for direct queue
  block: ensure that the timer is always added
  blk-mq: blk_mq_unregister_hctx() can be static
  blk-mq: make the sysfs mq/ layout reflect current mappings
  blk-mq: blk_mq_tag_to_rq should handle flush request
  block: remove dead code in scsi_ioctl:blk_verify_command
  blk-mq: request initialization optimizations
  block: add queue flag for disabling SG merging
  block: remove 'magic' from struct blk_plug
  blk-mq: remove alloc_hctx and free_hctx methods
  blk-mq: add file comments and update copyright notices
  blk-mq: remove blk_mq_alloc_request_pinned
  blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request
  blk-mq: remove blk_mq_wait_for_tags
  blk-mq: initialize request in __blk_mq_alloc_request
  blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request
  blk-mq: add helper to insert requests from irq context
  blk-mq: remove stale comment for blk_mq_complete_request()
  blk-mq: allow non-softirq completions
  ...
2014-06-02 09:29:34 -07:00
Jens Axboe ed851860b4 blk-mq: push IPI or local end_io decision to __blk_mq_complete_request()
We have callers outside of the blk-mq proper (like timeouts) that
want to call __blk_mq_complete_request(), so rename the function
and put the decision code for whether to use ->softirq_done_fn
or blk_mq_endio() into __blk_mq_complete_request().

This also makes the interface more logical again.
blk_mq_complete_request() attempts to atomically mark the request
completed, and calls __blk_mq_complete_request() if successful.
__blk_mq_complete_request() then just ends the request.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 21:20:50 -06:00
Jens Axboe feff689412 blk-mq: remember to start timeout handler for direct queue
Commit 07068d5b8e added a direct-to-hw-queue mode, but this mode
needs to remember to add the request timeout handler as well.
Without it, we don't track timeouts for these requests.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 15:42:56 -06:00
Jens Axboe c7bca4183f block: ensure that the timer is always added
Commit f793aa5378 relaxed the timer addition a little too much.
If the timer isn't pending, we always need to add it.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 15:41:39 -06:00
Fengguang Wu ee3c5db089 blk-mq: blk_mq_unregister_hctx() can be static
CC: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 10:31:13 -06:00
Jens Axboe 67aec14ce8 blk-mq: make the sysfs mq/ layout reflect current mappings
Currently blk-mq registers all the hardware queues in sysfs,
regardless of whether it uses them (e.g. they have CPU mappings)
or not. The unused hardware queues lack the cpux/ directories,
and the other sysfs entries (like active, pending, etc) are all
zeroes.

Change this so that sysfs correctly reflects the current mappings
of the hardware queues.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 08:25:36 -06:00
Jens Axboe f89ca16646 Merge branch 'for-3.16/core' into for-3.16/drivers
Pulled in for the blk_mq_tag_to_rq() change, which impacts
mtip32xx.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 08:11:50 -06:00
Shaohua Li 2230237500 blk-mq: blk_mq_tag_to_rq should handle flush request
flush request is special, which borrows the tag from the parent
request. Hence blk_mq_tag_to_rq needs special handling to return
the flush request from the tag.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 08:06:42 -06:00
Dave Jones da52f22fa9 block: remove dead code in scsi_ioctl:blk_verify_command
filter gets assigned the address of blk_default_cmd_filter on
entry to this function, so the !filter condition can never be true.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-29 13:38:50 -06:00
Jens Axboe 4b570521be blk-mq: request initialization optimizations
We currently clear a lot more than we need to, so make that a bit
more clever. Make some of the init dependent on features, like
only setting start_time if we are going to use it.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-29 11:00:11 -06:00
Jens Axboe 05f1dd5315 block: add queue flag for disabling SG merging
If devices are not SG starved, we waste a lot of time potentially
collapsing SG segments. Enough that 1.5% of the CPU time goes
to this, at only 400K IOPS. Add a queue flag, QUEUE_FLAG_NO_SG_MERGE,
which just returns the number of vectors in a bio instead of looping
over all segments and checking for collapsible ones.

Add a BLK_MQ_F_SG_MERGE flag so that drivers can opt-in on the sg
merging, if they so desire.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-29 09:53:32 -06:00
Jens Axboe 4d92a9beb3 block: remove 'magic' from struct blk_plug
I don't think we've ever caught any bugs with this, and there's the
list poisoning for the plug lists to catch uninitialized cases.
So remove the magic member and save 8 bytes in the struct.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-29 08:09:00 -06:00
Jens Axboe 0fb662e225 Merge branch 'for-3.16/core' into for-3.16/drivers
Pull in core changes (again), since we got rid of the alloc/free
hctx mq_ops hooks and mtip32xx then needed updating again.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 10:18:51 -06:00
Christoph Hellwig cdef54dd85 blk-mq: remove alloc_hctx and free_hctx methods
There is no need for drivers to control hardware context allocation
now that we do the context to node mapping in common code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 10:18:31 -06:00
Jens Axboe 75bb4625bb blk-mq: add file comments and update copyright notices
None of the blk-mq files have an explanatory comment at the top
for what that particular file does. Add that and add appropriate
copyright notices as well.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 10:15:41 -06:00
Jens Axboe 6178976500 Merge branch 'for-3.16/core' into for-3.16/drivers
mtip32xx uses blk_mq_alloc_reserved_request(), so pull in the
core changes so we have a properly merged end result.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:50:26 -06:00
Christoph Hellwig d852564f8c blk-mq: remove blk_mq_alloc_request_pinned
We now only have one caller left and can open code it there in a cleaner
way.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:49:27 -06:00
Christoph Hellwig 793597a6a9 blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request
We already do a non-blocking allocation in blk_mq_map_request, no need
to repeat it.  Just call __blk_mq_alloc_request to wait directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-28 09:49:25 -06:00