Commit Graph

31 Commits

Author SHA1 Message Date
Al Viro e8c2625599 switch selinux delayed superblock handling to iterate_supers()
... kill their private list, while we are at it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:17 -04:00
David P. Quigley 0d90a7ec48 SELinux: Condense super block security structure flags and cleanup necessary code.
The super block security structure currently has three fields for what are
essentially flags.  The flags field is used for mount options while two other
char fields are used for initialization and proc flags. These latter two fields are
essentially bit fields since the only used values are 0 and 1.  These fields
have been collapsed into the flags field and new bit masks have been added for
them. The code is also fixed to work with these new flags.

Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@macbook.localdomain>
2009-01-19 09:46:40 +11:00
David Howells a6f76f23d2 CRED: Make execve() take advantage of copy-on-write credentials
Make execve() take advantage of copy-on-write credentials, allowing it to set
up the credentials in advance, and then commit the whole lot after the point
of no return.

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     The credential bits from struct linux_binprm are, for the most part,
     replaced with a single credentials pointer (bprm->cred).  This means that
     all the creds can be calculated in advance and then applied at the point
     of no return with no possibility of failure.

     I would like to replace bprm->cap_effective with:

	cap_isclear(bprm->cap_effective)

     but this seems impossible due to special behaviour for processes of pid 1
     (they always retain their parent's capability masks where normally they'd
     be changed - see cap_bprm_set_creds()).

     The following sequence of events now happens:

     (a) At the start of do_execve, the current task's cred_exec_mutex is
     	 locked to prevent PTRACE_ATTACH from obsoleting the calculation of
     	 creds that we make.

     (a) prepare_exec_creds() is then called to make a copy of the current
     	 task's credentials and prepare it.  This copy is then assigned to
     	 bprm->cred.

  	 This renders security_bprm_alloc() and security_bprm_free()
     	 unnecessary, and so they've been removed.

     (b) The determination of unsafe execution is now performed immediately
     	 after (a) rather than later on in the code.  The result is stored in
     	 bprm->unsafe for future reference.

     (c) prepare_binprm() is called, possibly multiple times.

     	 (i) This applies the result of set[ug]id binaries to the new creds
     	     attached to bprm->cred.  Personality bit clearance is recorded,
     	     but now deferred on the basis that the exec procedure may yet
     	     fail.

         (ii) This then calls the new security_bprm_set_creds().  This should
	     calculate the new LSM and capability credentials into *bprm->cred.

	     This folds together security_bprm_set() and parts of
	     security_bprm_apply_creds() (these two have been removed).
	     Anything that might fail must be done at this point.

         (iii) bprm->cred_prepared is set to 1.

	     bprm->cred_prepared is 0 on the first pass of the security
	     calculations, and 1 on all subsequent passes.  This allows SELinux
	     in (ii) to base its calculations only on the initial script and
	     not on the interpreter.

     (d) flush_old_exec() is called to commit the task to execution.  This
     	 performs the following steps with regard to credentials:

	 (i) Clear pdeath_signal and set dumpable on certain circumstances that
	     may not be covered by commit_creds().

         (ii) Clear any bits in current->personality that were deferred from
             (c.i).

     (e) install_exec_creds() [compute_creds() as was] is called to install the
     	 new credentials.  This performs the following steps with regard to
     	 credentials:

         (i) Calls security_bprm_committing_creds() to apply any security
             requirements, such as flushing unauthorised files in SELinux, that
             must be done before the credentials are changed.

	     This is made up of bits of security_bprm_apply_creds() and
	     security_bprm_post_apply_creds(), both of which have been removed.
	     This function is not allowed to fail; anything that might fail
	     must have been done in (c.ii).

         (ii) Calls commit_creds() to apply the new credentials in a single
             assignment (more or less).  Possibly pdeath_signal and dumpable
             should be part of struct creds.

	 (iii) Unlocks the task's cred_replace_mutex, thus allowing
	     PTRACE_ATTACH to take place.

         (iv) Clears The bprm->cred pointer as the credentials it was holding
             are now immutable.

         (v) Calls security_bprm_committed_creds() to apply any security
             alterations that must be done after the creds have been changed.
             SELinux uses this to flush signals and signal handlers.

     (f) If an error occurs before (d.i), bprm_free() will call abort_creds()
     	 to destroy the proposed new credentials and will then unlock
     	 cred_replace_mutex.  No changes to the credentials will have been
     	 made.

 (2) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_bprm_alloc(), ->bprm_alloc_security()
     (*) security_bprm_free(), ->bprm_free_security()

     	 Removed in favour of preparing new credentials and modifying those.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()
     (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds()

     	 Removed; split between security_bprm_set_creds(),
     	 security_bprm_committing_creds() and security_bprm_committed_creds().

     (*) security_bprm_set(), ->bprm_set_security()

     	 Removed; folded into security_bprm_set_creds().

     (*) security_bprm_set_creds(), ->bprm_set_creds()

     	 New.  The new credentials in bprm->creds should be checked and set up
     	 as appropriate.  bprm->cred_prepared is 0 on the first call, 1 on the
     	 second and subsequent calls.

     (*) security_bprm_committing_creds(), ->bprm_committing_creds()
     (*) security_bprm_committed_creds(), ->bprm_committed_creds()

     	 New.  Apply the security effects of the new credentials.  This
     	 includes closing unauthorised files in SELinux.  This function may not
     	 fail.  When the former is called, the creds haven't yet been applied
     	 to the process; when the latter is called, they have.

 	 The former may access bprm->cred, the latter may not.

 (3) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) The bprm_security_struct struct has been removed in favour of using
     	 the credentials-under-construction approach.

     (c) flush_unauthorized_files() now takes a cred pointer and passes it on
     	 to inode_has_perm(), file_has_perm() and dentry_open().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:24 +11:00
Paul Moore 6c5b3fc014 selinux: Cache NetLabel secattrs in the socket's security struct
Previous work enabled the use of address based NetLabel selectors, which
while highly useful, brought the potential for additional per-packet overhead
when used.  This patch attempts to mitigate some of that overhead by caching
the NetLabel security attribute struct within the SELinux socket security
structure.  This should help eliminate the need to recreate the NetLabel
secattr structure for each packet resulting in less overhead.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:33 -04:00
Paul Moore 014ab19a69 selinux: Set socket NetLabel based on connection endpoint
Previous work enabled the use of address based NetLabel selectors, which while
highly useful, brought the potential for additional per-packet overhead when
used.  This patch attempts to solve that by applying NetLabel socket labels
when sockets are connect()'d.  This should alleviate the per-packet NetLabel
labeling for all connected sockets (yes, it even works for connected DGRAM
sockets).

Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:33 -04:00
Paul Moore 948bf85c1b netlabel: Add functionality to set the security attributes of a packet
This patch builds upon the new NetLabel address selector functionality by
providing the NetLabel KAPI and CIPSO engine support needed to enable the
new packet-based labeling.  The only new addition to the NetLabel KAPI at
this point is shown below:

 * int netlbl_skbuff_setattr(skb, family, secattr)

... and is designed to be called from a Netfilter hook after the packet's
IP header has been populated such as in the FORWARD or LOCAL_OUT hooks.

This patch also provides the necessary SELinux hooks to support this new
functionality.  Smack support is not currently included due to uncertainty
regarding the permissions needed to expand the Smack network access controls.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:32 -04:00
James Morris feb2a5b82d SELinux: remove inherit field from inode_security_struct
Remove inherit field from inode_security_struct, per Stephen Smalley:
"Let's just drop inherit altogether - dead field."

Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:01:38 +10:00
Richard Kennedy fdeb05184b SELinux: reorder inode_security_struct to increase objs/slab on 64bit
reorder inode_security_struct to remove padding on 64 bit builds

size reduced from 72 to 64 bytes increasing objects per slab to 64.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:01:37 +10:00
Eric Paris a936b79bdf SELinux: objsec.h whitespace, syntax, and other cleanups
This patch changes objsec.h to fix whitespace and syntax issues.  Things that
are fixed may include (does not not have to include)

whitespace at end of lines
spaces followed by tabs
spaces used instead of tabs
spacing around parenthesis
location of { around structs and else clauses
location of * in pointer declarations
removal of initialization of static data to keep it in the right section
useless {} in if statemetns
useless checking for NULL before kfree
fixing of the indentation depth of switch statements
no assignments in if statements
and any number of other things I forgot to mention

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-28 09:29:00 +10:00
Paul Moore 3e11217263 SELinux: Add network port SID cache
Much like we added a network node cache, this patch adds a network port
cache. The design is taken almost completely from the network node cache
which in turn was taken from the network interface cache.  The basic idea is
to cache entries in a hash table based on protocol/port information.  The
hash function only takes the port number into account since the number of
different protocols in use at any one time is expected to be relatively
small.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-18 20:26:16 +10:00
Roland McGrath 0356357c51 selinux: remove ptrace_sid
This changes checks related to ptrace to get rid of the ptrace_sid tracking.
It's good to disentangle the security model from the ptrace implementation
internals.  It's sufficient to check against the SID of the ptracer at the
time a tracee attempts a transition.

Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-18 20:26:10 +10:00
James Morris 98e9894650 SELinux: remove unused backpointers from security objects
Remove unused backpoiters from security objects.

Signed-off-by: James Morris <jmorris@namei.org>
2008-04-18 20:26:04 +10:00
Paul Moore f74af6e816 SELinux: Correct the NetLabel locking for the sk_security_struct
The RCU/spinlock locking approach for the nlbl_state in the sk_security_struct
was almost certainly overkill.  This patch removes both the RCU and spinlock
locking, relying on the existing socket locks to handle the case of multiple
writers.  This change also makes several code reductions possible.

Less locking, less code - it's a Good Thing.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-04-18 20:26:03 +10:00
Paul Moore 220deb966e SELinux: Better integration between peer labeling subsystems
Rework the handling of network peer labels so that the different peer labeling
subsystems work better together.  This includes moving both subsystems to a
single "peer" object class which involves not only changes to the permission
checks but an improved method of consolidating multiple packet peer labels.
As part of this work the inbound packet permission check code has been heavily
modified to handle both the old and new behavior in as sane a fashion as
possible.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-30 08:17:25 +11:00
Paul Moore 224dfbd81e SELinux: Add a network node caching mechanism similar to the sel_netif_*() functions
This patch adds a SELinux IP address/node SID caching mechanism similar to the
sel_netif_*() functions.  The node SID queries in the SELinux hooks files are
also modified to take advantage of this new functionality.  In addition, remove
the address length information from the sk_buff parsing routines as it is
redundant since we already have the address family.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-30 08:17:23 +11:00
Paul Moore e8bfdb9d0d SELinux: Convert the netif code to use ifindex values
The current SELinux netif code requires the caller have a valid net_device
struct pointer to lookup network interface information.  However, we don't
always have a valid net_device pointer so convert the netif code to use
the ifindex values we always have as part of the sk_buff.  This patch also
removes the default message SID from the network interface record, it is
not being used and therefore is "dead code".

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-30 08:17:21 +11:00
Eric Paris c9180a57a9 Security: add get, set, and cloning of superblock security information
Adds security_get_sb_mnt_opts, security_set_sb_mnt_opts, and
security_clont_sb_mnt_opts to the LSM and to SELinux.  This will allow
filesystems to directly own and control all of their mount options if they
so choose.  This interface deals only with option identifiers and strings so
it should generic enough for any LSM which may come in the future.

Filesystems which pass text mount data around in the kernel (almost all of
them) need not currently make use of this interface when dealing with
SELinux since it will still parse those strings as it always has.  I assume
future LSM's would do the same.  NFS is the primary FS which does not use
text mount data and thus must make use of this interface.

An LSM would need to implement these functions only if they had mount time
options, such as selinux has context= or fscontext=.  If the LSM has no
mount time options they could simply not implement and let the dummy ops
take care of things.

An LSM other than SELinux would need to define new option numbers in
security.h and any FS which decides to own there own security options would
need to be patched to use this new interface for every possible LSM.  This
is because it was stated to me very clearly that LSM's should not attempt to
understand FS mount data and the burdon to understand security should be in
the FS which owns the options.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-25 11:29:46 +11:00
Yuichi Nakamura 788e7dd4c2 SELinux: Improve read/write performance
It reduces the selinux overhead on read/write by only revalidating
permissions in selinux_file_permission if the task or inode labels have
changed or the policy has changed since the open-time check.  A new LSM
hook, security_dentry_open, is added to capture the necessary state at open
time to allow this optimization.

(see http://marc.info/?l=selinux&m=118972995207740&w=2)

Signed-off-by: Yuichi Nakamura<ynakam@hitachisoft.jp>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2007-10-17 08:59:31 +10:00
Paul Moore 9f2ad66509 NetLabel: SELinux cleanups
This patch does a lot of cleanup in the SELinux NetLabel support code.  A
summary of the changes include:

* Use RCU locking for the NetLabel state variable in the skk_security_struct
  instead of using the inode_security_struct mutex.
* Remove unnecessary parameters in selinux_netlbl_socket_post_create().
* Rename selinux_netlbl_sk_clone_security() to
  selinux_netlbl_sk_security_clone() to better fit the other NetLabel
  sk_security functions.
* Improvements to selinux_netlbl_inode_permission() to help reduce the cost of
  the common case.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02 21:24:13 -08:00
Eric Paris bc7e982b84 [PATCH] SELinux: convert sbsec semaphore to a mutex
This patch converts the semaphore in the superblock security struct to a
mutex.  No locking changes or other code changes are done.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
Eric Paris 2397074172 [PATCH] SELinux: change isec semaphore to a mutex
This patch converts the remaining isec->sem into a mutex.  Very similar
locking is provided as before only in the faster smaller mutex rather than a
semaphore.  An out_unlock path is introduced rather than the conditional
unlocking found in the original code.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:53 -07:00
Venkat Yekkirala 7420ed23a4 [NetLabel]: SELinux support
Add NetLabel support to the SELinux LSM and modify the
socket_post_create() LSM hook to return an error code.  The most
significant part of this patch is the addition of NetLabel hooks into
the following SELinux LSM hooks:

 * selinux_file_permission()
 * selinux_socket_sendmsg()
 * selinux_socket_post_create()
 * selinux_socket_sock_rcv_skb()
 * selinux_socket_getpeersec_stream()
 * selinux_socket_getpeersec_dgram()
 * selinux_sock_graft()
 * selinux_inet_conn_request()

The basic reasoning behind this patch is that outgoing packets are
"NetLabel'd" by labeling their socket and the NetLabel security
attributes are checked via the additional hook in
selinux_socket_sock_rcv_skb().  NetLabel itself is only a labeling
mechanism, similar to filesystem extended attributes, it is up to the
SELinux enforcement mechanism to perform the actual access checks.

In addition to the changes outlined above this patch also includes
some changes to the extended bitmap (ebitmap) and multi-level security
(mls) code to import and export SELinux TE/MLS attributes into and out
of NetLabel.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:36 -07:00
Venkat Yekkirala 892c141e62 [MLSXFRM]: Add security sid to sock
This adds security for IP sockets at the sock level. Security at the
sock level is needed to enforce the SELinux security policy for
security associations even when a sock is orphaned (such as in the TCP
LAST_ACK state).

This will also be used to enforce SELinux controls over data arriving
at or leaving a child socket while it's still waiting to be accepted.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:22 -07:00
Eric Paris c312feb293 [PATCH] SELinux: decouple fscontext/context mount options
Remove the conflict between fscontext and context mount options.  If
context= is specified without fscontext it will operate just as before, if
both are specified we will use mount point labeling and all inodes will get
the label specified by context=.  The superblock will be labeled with the
label of fscontext=, thus affecting operations which check the superblock
security context, such as associate permissions.

Signed-off-by: Eric Paris <eparis@parisplace.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:13 -07:00
Eric Paris 42c3e03ef6 [PATCH] SELinux: Add sockcreate node to procattr API
Below is a patch to add a new /proc/self/attr/sockcreate A process may write a
context into this interface and all subsequent sockets created will be labeled
with that context.  This is the same idea as the fscreate interface where a
process can specify the label of a file about to be created.  At this time one
envisioned user of this will be xinetd.  It will be able to better label
sockets for the actual services.  At this time all sockets take the label of
the creating process, so all xinitd sockets would just be labeled the same.

I tested this by creating a tcp sender and listener.  The sender was able to
write to this new proc file and then create sockets with the specified label.
I am able to be sure the new label was used since the avc denial messages
kicked out by the kernel included both the new security permission
setsockcreate and all the socket denials were for the new label, not the label
of the running process.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:26 -07:00
Michael LeMay 4eb582cf1f [PATCH] keys: add a way to store the appropriate context for newly-created keys
Add a /proc/<pid>/attr/keycreate entry that stores the appropriate context for
newly-created keys.  Modify the selinux_key_alloc hook to make use of the new
entry.  Update the flask headers to include a new "setkeycreate" permission
for processes.  Update the flask headers to include a new "create" permission
for keys.  Use the create permission to restrict which SIDs each task can
assign to newly-created keys.  Add a new parameter to the security hook
"security_key_alloc" to indicate whether it is being invoked by the kernel, or
from userspace.  If it is being invoked by the kernel, the security hook
should never fail.  Update the documentation to reflect these changes.

Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:18 -07:00
Michael LeMay d720024e94 [PATCH] selinux: add hooks for key subsystem
Introduce SELinux hooks to support the access key retention subsystem
within the kernel.  Incorporate new flask headers from a modified version
of the SELinux reference policy, with support for the new security class
representing retained keys.  Extend the "key_alloc" security hook with a
task parameter representing the intended ownership context for the key
being allocated.  Attach security information to root's default keyrings
within the SELinux initialization routine.

Has passed David's testsuite.

Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:55 -07:00
Stephen Smalley 9ac49d2213 [PATCH] selinux: remove security struct magic number fields and tests
Remove the SELinux security structure magic number fields and tests, along
with some unnecessary tests for NULL security pointers.  These fields and
tests are leftovers from the early attempts to support SELinux as a
loadable module during LSM development.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Stephen Smalley a74574aafe [PATCH] Remove security_inode_post_create/mkdir/symlink/mknod hooks
This patch removes the inode_post_create/mkdir/mknod/symlink LSM hooks as
they are obsoleted by the new inode_init_security hook that enables atomic
inode security labeling.

If anyone sees any reason to retain these hooks, please speak now.  Also,
is anyone using the post_rename/link hooks; if not, those could also be
removed.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:28 -07:00
Stephen Smalley 5e41ff9e06 [PATCH] security: enable atomic inode security labeling
The following patch set enables atomic security labeling of newly created
inodes by altering the fs code to invoke a new LSM hook to obtain the security
attribute to apply to a newly created inode and to set up the incore inode
security state during the inode creation transaction.  This parallels the
existing processing for setting ACLs on newly created inodes.  Otherwise, it
is possible for new inodes to be accessed by another thread via the dcache
prior to complete security setup (presently handled by the
post_create/mkdir/...  LSM hooks in the VFS) and a newly created inode may be
left unlabeled on the disk in the event of a crash.  SELinux presently works
around the issue by ensuring that the incore inode security label is
initialized to a special SID that is inaccessible to unprivileged processes
(in accordance with policy), thereby preventing inappropriate access but
potentially causing false denials on legitimate accesses.  A simple test
program demonstrates such false denials on SELinux, and the patch solves the
problem.  Similar such false denials have been encountered in real
applications.

This patch defines a new inode_init_security LSM hook to obtain the security
attribute to apply to a newly created inode and to set up the incore inode
security state for it, and adds a corresponding hook function implementation
to SELinux.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:27 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00