Commit Graph

167 Commits

Author SHA1 Message Date
Valentin Longchamp c2e5307b90 mx31: changed CONSISTENT_DMA_SIZE to 8M for mx31 video
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:21:26 +02:00
Sri Deevi 6e4f574ba4 V4L/DVB (10958): cx231xx: some additional CodingStyle and minor fixes
changed the pcb-config.c/h to pcb-cfg.c/h for short names.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:44:04 -03:00
Paulius Zaleckas 6acc81c394 V4L/DVB (11350): Add camera (CSI) driver for MX1
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs.

 create mode 100644 arch/arm/mach-mx1/ksym_mx1.c
 create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S
 create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h
 create mode 100644 drivers/media/video/mx1_camera.c

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:43:58 -03:00
Hans Verkuil ffe84b7a31 V4L/DVB (11281): bttv: move saa6588 config to the helper chip config
saa6588 can also be used by other drivers than just bttv. Move it to a
new RDS decoders category and add it as helper chip to bttv.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:46 -03:00
Janne Grunau 9aba42efe8 V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device
The device encodes component video up to 1080i to a MPEG-TS stream with
H.264 video and stereo AAC audio. Newer firmwares accept also AC3
(up to 5.1) audio over optical SPDIF without reencoding.
Firmware upgrade is unimplemeted but rather unimportant since
the firmware sits on a flash chip.

The I2C adapter to drive the integrated infrared receiver/sender is
currently disabled due to a conflict with cx18-based devices.

Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:28 -03:00
Sascha Hauer e958e27ade V4L/DVB (11033): mt9v022: allow setting of bus width from board code
This patch removes the phytec specific setting of the bus width
and switches to the more generic query_bus_param/set_bus_param
hooks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Sascha Hauer 36034dc325 V4L/DVB (11032): mt9m001: allow setting of bus width from board code
This patch removes the phytec specific setting of the bus width
and switches to the more generic query_bus_param/set_bus_param
hooks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Jean Delvare cea0c681be V4L/DVB (10867): vino: fold i2c-algo-sgi code into vino.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:11 -03:00
Mauro Carvalho Chehab 85f8841e8a V4L/DVB (10769): Update dependencies of the modules converted to V4L2
Several modules were converted to V4L2 API. Update their dependencies on Kconfig.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:02 -03:00
Hans Verkuil 107063c615 V4L/DVB (10714): zoran et al: convert zoran i2c modules to V4L2.
The zoran i2c modules were still using V4L1 internally. Replace this
with V4L2. Also deleted saa7111.c and saa7114.c, we use saa7115.c instead.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[mchehab@redhat.com: fix v4l2_ctrl_query_fill_std merge conflict]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:57 -03:00
Guennadi Liakhovetski 4f67130ad3 V4L/DVB (10674): soc-camera: camera host driver for i.MX3x SoCs
Tested with 8 bit Bayer and 8 bit monochrome video.

 create mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h
 create mode 100644 drivers/media/video/mx3_camera.c

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:53 -03:00
Guennadi Liakhovetski 4e96fd088c V4L/DVB (10099): soc-camera: add support for MT9T031 CMOS camera sensor from Micron
This camera is rather similar to MT9M001, but also has a couple of
enhanced features, like pixel binning.

 create mode 100644 drivers/media/video/mt9t031.c

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:40:30 -02:00
Kuninori Morimoto ed922a892e V4L/DVB (10094): Add tw9910 driver
This patch adds tw9910 driver that use soc_camera framework.
It was tested on SH Migo-r board and mplayer.

 create mode 100644 drivers/media/video/tw9910.c
 create mode 100644 include/media/tw9910.h

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:40:28 -02:00
Mike Rapoport d7f83a5106 V4L/DVB (10077): mt9m111: add support for mt9m112 since sensors seem identical
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:40:20 -02:00
Vaibhav Hiremath 07b1747c8d V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driver
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: R Sivaraj <sivaraj@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Karicheri Muralidharan <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:36 -02:00
Sakari Ailus 39aee69a16 V4L/DVB (9815): omap2: add OMAP2 camera driver.
Add a driver for the OMAP2 camera block. OMAP2 is used in e.g. Nokia
N800/N810 internet tablet.

This driver uses the V4L2 internal ioctl interface.

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:35 -02:00
Hans Verkuil 91121d9cfd V4L/DVB (9507): v4l: remove EXPERIMENTAL from several drivers
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:26 -02:00
Kuninori Morimoto 08a66aea55 V4L/DVB (9488): Add ov772x driver
This patch adds ov772x driver that use soc_camera framework.
It was tested on SH Migo-r board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:25 -02:00
Paul Mundt af505b1eab media: sh_mobile_ceu_camera: Add HAVE_CLK dependency.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Hans Verkuil 45d011031d V4L/DVB (9129): zoran: move zoran sources into a zoran subdirectory
Prevent the zoran driver sources from cluttering the video directory.
This changeset only moves the drivers and it does not fix any of the
checkpatch warnings/errors to keep the changeset clean.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:39:04 -02:00
Hans Verkuil dd89601d47 V4L/DVB (9133): v4l: disconnect kernel number from minor
The v4l core creates four different video devices (video, vbi, radio, vtx)
and each has its own range of minor numbers. However, modern devices keep
increasing the number of devices that they need so a maximum of 64 video
devices will not be enough in the future. In addition this scheme makes
it very hard to add new device types.

This patch disconnects the kernel number allocation (e.g. video0, video1,
etc.) from the actual minor number (just pick the first free minor).

This allows for much more flexibility in the future. However, it does
require the use of udev. For those who cannot use udev a new CONFIG option
was created that changes the allocation scheme back to the old behavior.

Thanks to Greg KH for suggesting this approach during the 2008 LPC.

In addition, several bugs were fixed in the ivtv and cx18 drivers: these
drivers try to allocate specific kernel numbers but that scheme contained
a bug which caused what should have been e.g. video17 to appear as e.g.
video2.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:37:16 -02:00
Hans Verkuil 707ecf4603 V4L/DVB (8941): mxb/tda9840: cleanups, use module saa7115 instead of saa7111.
Cleanup tda9840 and use a v4l2 API to get the tuner subchannels.
Do some cleanups in mxb and switch to saa7115 instead of the saa7111
module.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:37:00 -02:00
Hans Verkuil 45a5b872bd V4L/DVB (8690): tuner-3036: remove driver
This driver is for VERY old i2c-over-parallel port teletext receiver
boxes. Rather then spending effort on converting this driver to V4L2,
and since it is extremely unlikely that anyone still uses one of these
devices, it was decided to drop it (after discussing this as well with
the original author, Phil Blundell).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:50 -02:00
Hans Verkuil e067776094 V4L/DVB (8689): dpc7146: remove dpc7146 demonstration board driver
Old driver for the dpc7146 demonstration board that is no longer
relevant. The last time this was tested on actual hardware was
probably around 2002. Since this is a driver for a demonstration
board the decision was made (after discussing this with the original
author, Michael Hunold) to remove it rather than spending a
lot of effort continually updating this driver to stay in sync
with the latest internal V4L2 or I2C API.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Michael Hunold <hunold@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:50 -02:00
Guennadi Liakhovetski 506c629a8e V4L/DVB (8686): mt9m111: style cleanup
Fix a typo in Kconfig, simplify error checking, further minor cleanup.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.iakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:50 -02:00
Robert Jarzmik 77110abbfb V4L/DVB (8684): Add support for Micron MT9M111 camera.
Adds support for Micron MT9M111 camera chip, with basic
features :
 - view rectangle configurable
 - some output formats (bayer8, bayer10, rgb565, rgb555, ycbycr)
 - autoexposure
 - only highpower mode context used (ie. context B)

 create mode 100644 drivers/media/video/mt9m111.c

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:50 -02:00
Hans Verkuil ad4eada70b V4L/DVB (8641): arv: fix compilation errors/warnings
- add PCI dependency for btcx
- fix compile errors (doesn't like ';' at the end of a #if 0)

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:48 -02:00
Mauro Carvalho Chehab 96f1e40431 V4L/DVB (8554): media/video/Kconfig: cosmetic changes and convert select into depends on
It seems cosmetically better to let USB drivers be the last one.

Also, two SOC drivers were using select, instead of depends on SOC_CAMERA.

Since select has some drawbacks when checking for dependencies, convert those
two into depends on.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:46 -02:00
Mauro Carvalho Chehab b50863d6e3 V4L/DVB (8553): media/video/Kconfig: get rid of a select
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:46 -02:00
Geert Uytterhoeven 5368f69c8b VIDEO_SH_MOBILE_CEU should depend on HAS_DMA
commit 0d3244d643 ("V4L/DVB (8342):
sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3") introduced
VIDEO_SH_MOBILE_CEU, which selects VIDEOBUF_DMA_CONTIG. This circumvents the
dependency on HAS_DMA of VIDEOBUF_DMA_CONTIG.

Add a dependency on HAS_DMA to VIDEO_SH_MOBILE_CEU to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-10 14:15:29 -07:00
Mauro Carvalho Chehab 35774f42dc V4L/DVB (8558): media/video/Kconfig: fix a typo
Thanks to Hermann Gausterer for pointing this issue.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-06 06:57:03 -03:00
Adrian Bunk 58cfdf9acf V4L/DVB (8485): v4l-dvb: remove broken PlanB driver
The PlanB driver has been broken since around May 2004. No one stepped
in to maintain it, so it is now being removed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Michel Lanners <mlan@cpu.lu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26 12:55:10 -03:00
Mauro Carvalho Chehab 4c7827eec7 V4L/DVB (8234a): uvcvideo: Fix build for uvc input
Fix a bug introduced by some trouble on my -git tree that resulted on a hunk to
be lost (probably caused by some rebase).

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-24 13:46:19 -03:00
Mauro Carvalho Chehab af8b303e96 V4L/DVB (8397): video: convert select VIDEO_ZORAN_ZR36060 into depends on
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:29:12 -03:00
Mauro Carvalho Chehab 367394ac5c V4L/DVB (8396): video: Fix Kbuild dependency for VIDEO_IR_I2C
Instead of letting VIDEO_IR_I2C to be selected by VIDEO_IR, if I2C, convert it
into a symbol that depends on both VIDEO_IR and I2C.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:29:08 -03:00
Mauro Carvalho Chehab 432aa3b64d V4L/DVB (8393): media/video: Fix depencencies for VIDEOBUF
VIDEOBUF_DVB depends on VIDEOBUF_CORE, not on VIDEOBUF_DMA_SG

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:28:54 -03:00
Magnus Damm 326c986207 V4L/DVB (8343): soc_camera_platform: Add SoC Camera Platform driver
This patch adds a simple platform camera device. Useful for testing
cameras with SoC camera host drivers. Only one single pixel format
and resolution combination is supported.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:25:49 -03:00
Magnus Damm 0d3244d643 V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3
This is V3 of the SuperH Mobile CEU soc_camera driver.

The CEU hardware block is configured in a transparent data fetch
mode, frames are captured from the attached camera and written to
physically contiguous memory buffers provided by the newly added
videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors.

 Changes since V2:
 - remove SUPERH Kconfig dependency
 - move sh_mobile_ceu.h to include/media
 - add board callback support with enable_camera()/disable_camera()
 - add support for declare_coherent_memory
 - rework video memory limit
 - more verbose error messages

 Changes since V1:
 - fixed the CEU driver to work with the newly updated patches

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:25:43 -03:00
Magnus Damm 2cc45cf25a V4L/DVB (8341): videobuf: Add physically contiguous queue code V3
This is V3 of the physically contiguous videobuf queues patch.
Useful for hardware such as the SuperH Mobile CEU which doesn't
support scatter gatter bus mastering.

Since it may be difficult to allocate large chunks of physically
contiguous memory after some uptime due to fragmentation, this code
allocates memory using dma_alloc_coherent(). Architectures supporting
dma_declare_coherent_memory() can easily avoid fragmentation issues
by using dma_declare_coherent_memory() to force dma_alloc_coherent()
to allocate from a certain pre-allocated memory area.

 Changes since V2
  - use dma_handle for physical address
  - use "scatter gather" instead of "scatter gatter"

 Changes since V1:
  - use dev_err() instead of pr_err()
  - remember size in struct videobuf_dma_contig_memory
  - keep struct videobuf_dma_contig_memory in .c file
  - let videobuf_to_dma_contig() return dma_addr_t
  - implement __videobuf_sync()
  - return statements, white space and other minor fixes

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:25:37 -03:00
Paulius Zaleckas 092d392119 V4L/DVB (8337): soc_camera: make videobuf independent
Makes SoC camera videobuf independent. Includes all necessary changes for
PXA camera driver (currently the only driver using soc_camera in the mainline).
These changes are important for the future soc_camera based drivers.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:25:17 -03:00
Jean-Francois Moine 63eb9546dc V4L/DVB (8152): Initial release of gspca with only one driver.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:14:28 -03:00
Dean Anderson 38f993ad8b V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.
It was primarily developed by Dean Anderson with only a little bit of
guidance and cleanup by Greg.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[mchehab@infradead.org: fixed renamed callbacks]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:12:59 -03:00
Laurent Pinchart c0efd23292 V4L/DVB (8145a): USB Video Class driver
This driver supports video input devices compliant with the USB Video Class
specification. This means lots of currently manufactured webcams, and probably
most of the future ones.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-30 17:31:13 -03:00
Al Viro 46cb69ccdf missing dependencies on HAS_DMA
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21 16:55:59 -07:00
Mauro Carvalho Chehab fdbbfb092c V4L/DVB (7846): Re-creates VIDEO_TUNER
VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the
previous behaviour before the creation of MEDIA_TUNER.

Before this patch, tuner.ko were created even for drivers that don't need a
tuner (like webcam drivers).

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14 02:54:07 -03:00
Guennadi Liakhovetski b7eccc404f V4L/DVB (7810): soc_camera: mt9v022 and mt9m001 depend on I2C
Both mt9v022 and mt9m001 cameras are controlled over the I2C bus.
Respectively, their drivers require I2C to be built successfully.
Thanks to Ingo Molnar for reporting the build-breakage.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-14 02:53:59 -03:00
Hans Verkuil 1c1e45d17b V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip
Many thanks to Steve Toth from Hauppauge and Nattu Dakshinamurthy from
Conexant for their support. I am in particular thankful to Hauppauge
since without their help this driver would not exist. It should also
be noted that Steve did the work to get the DVB part up and running.
Thank you!

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: G. Andrew Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29 18:41:41 -03:00
Mauro Carvalho Chehab 149ef72dee Rename common tuner Kconfig names to use the same
namespace for all of them.
2008-04-29 18:41:38 -03:00
Mauro Carvalho Chehab 7c91f0624a V4L/DVB(7767): Move tuners to common/tuners
There were several issues in the past, caused by the hybrid tuner design, since
now, the same tuner can be used by drivers/media/dvb and drivers/media/video.

Kconfig items were rearranged, to split V4L/DVB core from their drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29 18:41:37 -03:00
Steven Toth 265a651062 V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USB
Including support for the AU0828 USB Bridge.
Including support for the AU8522 ATSC/QAM Demodulator.
Including support for the AU8522 ATSC/QAM Demodulator.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:09:42 -03:00