Commit Graph

79 Commits

Author SHA1 Message Date
Jens Axboe a31a97381c block: don't use plugging on SSD devices
We just want to hand the first bits of IO to the device as fast
as possible. Gains a few percent on the IOPS rate.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:45 +01:00
Tejun Heo a7384677b2 block: remove duplicate or unused barrier/discard error paths
* Because barrier mode can be changed dynamically, whether barrier is
  supported or not can be determined only when actually issuing the
  barrier and there is no point in checking it earlier.  Drop barrier
  support check in generic_make_request() and __make_request(), and
  update comment around the support check in blk_do_ordered().

* There is no reason to check discard support in both
  generic_make_request() and __make_request().  Drop the check in
  __make_request().  While at it, move error action block to the end
  of the function and add unlikely() to q existence test.

* Barrier request, be it empty or not, is never passed to low level
  driver and thus it's meaningless to try to copy back req->sector to
  bio->bi_sector on error.  In addition, the notion of failed sector
  doesn't make any sense for empty barrier to begin with.  Drop the
  code block from __end_that_request_first().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Cheng Renquan 64d01dc9e1 block: use cancel_work_sync() instead of kblockd_flush_work()
After many improvements on kblockd_flush_work, it is now identical to
cancel_work_sync, so a direct call to cancel_work_sync is suggested.

The only difference is that cancel_work_sync is a GPL symbol,
so no non-GPL modules anymore.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Keith Mannthey 08bafc0341 block: Supress Buffer I/O errors when SCSI REQ_QUIET flag set
Allow the scsi request REQ_QUIET flag to be propagated to the buffer
file system layer. The basic ideas is to pass the flag from the scsi
request to the bio (block IO) and then to the buffer layer.  The buffer
layer can then suppress needless printks.

This patch declutters the kernel log by removed the 40-50 (per lun)
buffer io error messages seen during a boot in my multipath setup . It
is a good chance any real errors will be missed in the "noise" it the
logs without this patch.

During boot I see blocks of messages like
"
__ratelimit: 211 callbacks suppressed
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242847
Buffer I/O error on device sdm, logical block 1
Buffer I/O error on device sdm, logical block 5242878
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242872
"
in my logs.

My disk environment is multipath fiber channel using the SCSI_DH_RDAC
code and multipathd.  This topology includes an "active" and "ghost"
path for each lun. IO's to the "ghost" path will never complete and the
SCSI layer, via the scsi device handler rdac code, quick returns the IOs
to theses paths and sets the REQ_QUIET scsi flag to suppress the scsi
layer messages.

 I am wanting to extend the QUIET behavior to include the buffer file
system layer to deal with these errors as well. I have been running this
patch for a while now on several boxes without issue.  A few runs of
bonnie++ show no noticeable difference in performance in my setup.

Thanks for John Stultz for the quiet_error finalization.

Submitted-by:  Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Jens Axboe 70ed28b92a block: leave the request timeout timer running even on an empty list
For sync IO, we'll often do them serialized. This means we'll be touching
the queue timer for every IO, as opposed to only occasionally like we
do for queued IO. Instead of deleting the timer when the last request
is removed, just let continue running. If a new request comes up soon
we then don't have to readd the timer again. If no new requests arrive,
the timer will expire without side effect later.

This improves high iops sync IO by ~1%.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:42 +01:00
Ingo Molnar 970987beb9 Merge branches 'tracing/ftrace', 'tracing/function-graph-tracer' and 'tracing/urgent' into tracing/core 2008-12-05 14:45:22 +01:00
Milan Broz 0e435ac26e block: fix setting of max_segment_size and seg_boundary mask
Fix setting of max_segment_size and seg_boundary mask for stacked md/dm
devices.

When stacking devices (LVM over MD over SCSI) some of the request queue
parameters are not set up correctly in some cases by default, namely
max_segment_size and and seg_boundary mask.

If you create MD device over SCSI, these attributes are zeroed.

Problem become when there is over this mapping next device-mapper mapping
- queue attributes are set in DM this way:

request_queue   max_segment_size  seg_boundary_mask
SCSI                65536             0xffffffff
MD RAID1                0                      0
LVM                 65536                 -1 (64bit)

Unfortunately bio_add_page (resp.  bio_phys_segments) calculates number of
physical segments according to these parameters.

During the generic_make_request() is segment cout recalculated and can
increase bio->bi_phys_segments count over the allowed limit.  (After
bio_clone() in stack operation.)

Thi is specially problem in CCISS driver, where it produce OOPS here

    BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);

(MAXSEGENTRIES is 31 by default.)

Sometimes even this command is enough to cause oops:

  dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10

This command generates bios with 250 sectors, allocated in 32 4k-pages
(last page uses only 1024 bytes).

For LVM layer, it allocates bio with 31 segments (still OK for CCISS),
unfortunatelly on lower layer it is recalculated to 32 segments and this
violates CCISS restriction and triggers BUG_ON().

The patch tries to fix it by:

 * initializing attributes above in queue request constructor
   blk_queue_make_request()

 * make sure that blk_queue_stack_limits() inherits setting

 (DM uses its own function to set the limits because it
 blk_queue_stack_limits() was introduced later.  It should probably switch
 to use generic stack limit function too.)

 * sets the default seg_boundary value in one place (blkdev.h)

 * use this mask as default in DM (instead of -1, which differs in 64bit)

Bugs related to this:
https://bugzilla.redhat.com/show_bug.cgi?id=471639
http://bugzilla.kernel.org/show_bug.cgi?id=8672

Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:55:55 +01:00
Tejun Heo 53a08807c0 block: internal dequeue shouldn't start timer
blkdev_dequeue_request() and elv_dequeue_request() are equivalent and
both start the timeout timer.  Barrier code dequeues the original
barrier request but doesn't passes the request itself to lower level
driver, only broken down proxy requests; however, as the original
barrier code goes through the same dequeue path and timeout timer is
started on it.  If barrier sequence takes long enough, this timer
expires but the low level driver has no idea about this request and
oops follows.

Timeout timer shouldn't have been started on the original barrier
request as it never goes through actual IO.  This patch unexports
elv_dequeue_request(), which has no external user anyway, and makes it
operate on elevator proper w/o adding the timer and make
blkdev_dequeue_request() call elv_dequeue_request() and add timer.
Internal users which don't pass the request to driver - barrier code
and end_that_request_last() - are converted to use
elv_dequeue_request().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:41:26 +01:00
Ingo Molnar 0bfc24559d blktrace: port to tracepoints, update
Port to the new tracepoints API: split DEFINE_TRACE() and DECLARE_TRACE()
sites. Spread them out to the usage sites, as suggested by
Mathieu Desnoyers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
2008-11-26 13:04:35 +01:00
Arnaldo Carvalho de Melo 5f3ea37c77 blktrace: port to tracepoints
This was a forward port of work done by Mathieu Desnoyers, I changed it to
encode the 'what' parameter on the tracepoint name, so that one can register
interest in specific events and not on classes of events to then check the
'what' parameter.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 12:13:34 +01:00
Mike Anderson e78042e5b8 blk: move blk_delete_timer call in end_that_request_last
Move the calling  blk_delete_timer to later in end_that_request_last to
address an issue where blkdev_dequeue_request may have add a timer for the
request.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-11-06 08:41:56 +01:00
Linus Torvalds c53dbf5486 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: remove __generic_unplug_device() from exports
  block: move q->unplug_work initialization
  blktrace: pass zfcp driver data
  blktrace: add support for driver data
  block: fix current kernel-doc warnings
  block: only call ->request_fn when the queue is not stopped
  block: simplify string handling in elv_iosched_store()
  block: fix kernel-doc for blk_alloc_devt()
  block: fix nr_phys_segments miscalculation bug
  block: add partition attribute for partition number
  block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT
  softirq: Add support for triggering softirq work on softirqs.
2008-10-17 09:29:55 -07:00
Jens Axboe f73e2d13a1 block: remove __generic_unplug_device() from exports
The only out-of-core user is IDE, and that should be using
blk_start_queueing() instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 14:03:08 +02:00
Peter Zijlstra 713ada9ba9 block: move q->unplug_work initialization
modprobe loop; rmmod loop effectively creates a blk_queue and destroys it
which results in q->unplug_work being canceled without it ever being
initialized.

Therefore, move the initialization of q->unplug_work from
blk_queue_make_request() to blk_alloc_queue*().

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Randy Dunlap 496aa8a98f block: fix current kernel-doc warnings
Fix block kernel-doc warnings:

Warning(linux-2.6.27-git4//fs/block_dev.c:1272): No description found for parameter 'path'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'cpu'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'part'
Warning(/var/linsrc/linux-2.6.27-git4//block/genhd.c:544): No description found for parameter 'partno'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Jens Axboe 80a4b58e36 block: only call ->request_fn when the queue is not stopped
Callers should use either blk_run_queue/__blk_run_queue, or
blk_start_queueing() to invoke request handling instead of calling
->request_fn() directly as that does not take the queue stopped
flag into account.

Also add appropriate comments on the above functions to detail
their usage.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Mike Christie 6000a368cd [SCSI] block: separate failfast into multiple bits.
Multipath is best at handling transport errors. If it gets a device
error then there is not much the multipath layer can do. It will just
access the same device but from a different path.

This patch breaks up failfast into device, transport and driver errors.
The multipath layers (md and dm mutlipath) only ask the lower levels to
fast fail transport errors. The user of failfast, read ahead, will ask
to fast fail on all errors.

Note that blk_noretry_request will return true if any failfast bit
is set. This allows drivers that do not support the multipath failfast
bits to continue to fail on any failfast error like before. Drivers
like scsi that are able to fail fast specific errors can check
for the specific fail fast type. In the next patch I will convert
scsi.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:52 -04:00
Kiyoshi Ueda d00e29fd99 block: remove end_{queued|dequeued}_request()
This patch removes end_queued_request() and end_dequeued_request(),
which are no longer used.

As a results, users of __end_request() became only end_request().
So the actual code in __end_request() is moved to end_request()
and __end_request() is removed.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:21 +02:00
Kiyoshi Ueda ef9e3facdf block: add lld busy state exporting interface
This patch adds an new interface, blk_lld_busy(), to check lld's
busy state from the block layer.
blk_lld_busy() calls down into low-level drivers for the checking
if the drivers set q->lld_busy_fn() using blk_queue_lld_busy().

This resolves a performance problem on request stacking devices below.

Some drivers like scsi mid layer stop dispatching request when
they detect busy state on its low-level device like host/target/device.
It allows other requests to stay in the I/O scheduler's queue
for a chance of merging.

Request stacking drivers like request-based dm should follow
the same logic.
However, there is no generic interface for the stacked device
to check if the underlying device(s) are busy.
If the request stacking driver dispatches and submits requests to
the busy underlying device, the requests will stay in
the underlying device's queue without a chance of merging.
This causes performance problem on burst I/O load.

With this patch, busy state of the underlying device is exported
via q->lld_busy_fn().  So the request stacking driver can check it
and stop dispatching requests if busy.

The underlying device driver must return the busy state appropriately:
    1: when the device driver can't process requests immediately.
    0: when the device driver can process requests immediately,
       including abnormal situations where the device driver needs
       to kill all requests.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:20 +02:00
Elias Oltmanns 336c3d8ce7 block: Fix blk_start_queueing() to not kick a stopped queue
blk_start_queueing() should act like the generic queue unplugging
and kicking and ignore a stopped queue. Such a queue may not be
run until after a call to blk_start_queue().

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:20 +02:00
Kiyoshi Ueda 4ee5eaf451 block: add a queue flag for request stacking support
This patch adds a queue flag to indicate the block device can be
used for request stacking.

Request stacking drivers need to stack their devices on top of
only devices of which q->request_fn is functional.
Since bio stacking drivers (e.g. md, loop) basically initialize
their queue using blk_alloc_queue() and don't set q->request_fn,
the check of (q->request_fn == NULL) looks enough for that purpose.

However, dm will become both types of stacking driver (bio-based and
request-based).  And dm will always set q->request_fn even if the dm
device is bio-based of which q->request_fn is not functional actually.
So we need something else to distinguish the type of the device.
Adding a queue flag is a solution for that.

The reason why dm always sets q->request_fn is to keep
the compatibility of dm user-space tools.
Currently, all dm user-space tools are using bio-based dm without
specifying the type of the dm device they use.
To use request-based dm without changing such tools, the kernel
must decide the type of the dm device automatically.
The automatic type decision can't be done at the device creation time
and needs to be deferred until such tools load a mapping table,
since the actual type is decided by dm target type included in
the mapping table.

So a dm device has to be initialized using blk_init_queue()
so that we can load either type of table.
Then, all queue stuffs are set (e.g. q->request_fn) and we have
no element to distinguish that it is bio-based or request-based,
even after a table is loaded and the type of the device is decided.

By the way, some stuffs of the queue (e.g. request_list, elevator)
are needless when the dm device is used as bio-based.
But the memory size is not so large (about 20[KB] per queue on ia64),
so I hope the memory loss can be acceptable for bio-based dm users.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Kiyoshi Ueda 82124d6035 block: add request submission interface
This patch adds blk_insert_cloned_request(), a generic request
submission interface for request stacking drivers.
Request-based dm will use it to submit their clones to underlying
devices.

blk_rq_check_limits() is also added because it is possible that
the lower queue has stronger limitations than the upper queue
if multiple drivers are stacking at request-level.
Not only for blk_insert_cloned_request()'s internal use, the function
will be used by request-based dm when the queue limitation is
modified (e.g. by replacing dm's table).

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Kiyoshi Ueda 32fab448e5 block: add request update interface
This patch adds blk_update_request(), which updates struct request
with completing its data part, but doesn't complete the struct
request itself.
Though it looks like end_that_request_first() of older kernels,
blk_update_request() should be used only by request stacking drivers.

Request-based dm will use it in bio->bi_end_io callback to update
the original request when a data part of a cloned request completes.
Followings are additional background information of why request-based
dm needs this interface.

  - Request stacking drivers can't use blk_end_request() directly from
    the lower driver's completion context (bio->bi_end_io or rq->end_io),
    because some device drivers (e.g. ide) may try to complete
    their request with queue lock held, and it may cause deadlock.
    See below for detailed description of possible deadlock:
    <http://marc.info/?l=linux-kernel&m=120311479108569&w=2>

  - To solve that, request-based dm offloads the completion of
    cloned struct request to softirq context (i.e. using
    blk_complete_request() from rq->end_io).

  - Though it is possible to use the same solution from bio->bi_end_io,
    it will delay the notification of bio completion to the original
    submitter.  Also, it will cause inefficient partial completion,
    because the lower driver can't perform the cloned request anymore
    and request-based dm needs to requeue and redispatch it to
    the lower driver again later.  That's not good.

  - So request-based dm needs blk_update_request() to perform the bio
    completion in the lower driver's completion context, which is more
    efficient.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Jens Axboe e3335de940 block: blk_cleanup_queue() should call blk_sync_queue()
When a driver calls blk_cleanup_queue(), the device should be fully idle.
However, the block layer may have pending plugging timers and the IO
schedulers may have pending work in the work queues. So quisce the device
by waiting for the timer and flushing the work queues.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Jens Axboe 242f9dcb8b block: unify request timeout handling
Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.

Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:13 +02:00
Jens Axboe 839e96afba block: update comment on end_request()
It refers to functions that no longer exist after the IO completion
changes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Jens Axboe 605401618c block: don't use bio_has_data() in the completion path
We should just check for rq->bio, as that is really the information
we are looking for. Even if the bio attached doesn't carry data,
we still need to do IO post processing on it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe ab780f1ece block: inherit CPU completion on bio->rq and rq->rq merges
Somewhat incomplete, as we do allow merges of requests and bios
that have different completion CPUs given. This is done on the
assumption that a larger IO is still more beneficial than CPU
locality.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe c7c22e4d5c block: add support for IO CPU affinity
This patch adds support for controlling the IO completion CPU of
either all requests on a queue, or on a per-request basis. We export
a sysfs variable (rq_affinity) which, if set, migrates completions
of requests to the CPU that originally submitted it. A bio helper
(bio_set_completion_cpu()) is also added, so that queuers can ask
for completion on that specific CPU.

In testing, this has been show to cut the system time by as much
as 20-40% on synthetic workloads where CPU affinity is desired.

This requires a little help from the architecture, so it'll only
work as designed for archs that are using the new generic smp
helper infrastructure.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe 18887ad910 block: make kblockd_schedule_work() take the queue as parameter
Preparatory patch for checking queuing affinity.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe b646fc59b3 block: split softirq handling into blk-softirq.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Tejun Heo 074a7aca7a block: move stats from disk to part0
Move stats related fields - stamp, in_flight, dkstats - from disk to
part0 and unify stat handling such that...

* part_stat_*() now updates part0 together if the specified partition
  is not part0.  ie. part_stat_*() are now essentially all_stat_*().

* {disk|all}_stat_*() are gone.

* part_round_stats() is updated similary.  It handles part0 stats
  automatically and disk_round_stats() is killed.

* part_{inc|dec}_in_fligh() is implemented which automatically updates
  part0 stats for parts other than part0.

* disk_map_sector_rcu() is updated to return part0 if no part matches.
  Combined with the above changes, this makes NULL special case
  handling in callers unnecessary.

* Separate stats show code paths for disk are collapsed into part
  stats show code paths.

* Rename disk_stat_lock/unlock() to part_stat_lock/unlock()

While at it, reposition stat handling macros a bit and add missing
parentheses around macro parameters.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo eddb2e26b5 block: kill GENHD_FL_FAIL and use part0->make_it_fail
GENHD_FL_FAIL for disk is what make_it_fail is for parts.  Kill it and
use part0->make_it_fail.  Sysfs node handling is unified too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo 0762b8bde9 block: always set bdev->bd_part
Till now, bdev->bd_part is set only if the bdev was for parts other
than part0.  This patch makes bdev->bd_part always set so that code
paths don't have to differenciate common handling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo c995905916 block: fix diskstats access
There are two variants of stat functions - ones prefixed with double
underbars which don't care about preemption and ones without which
disable preemption before manipulating per-cpu counters.  It's unclear
whether the underbarred ones assume that preemtion is disabled on
entry as some callers don't do that.

This patch unifies diskstats access by implementing disk_stat_lock()
and disk_stat_unlock() which take care of both RCU (for partition
access) and preemption (for per-cpu counter access).  diskstats access
should always be enclosed between the two functions.  As such, there's
no need for the versions which disables preemption.  They're removed
and double underbars ones are renamed to drop the underbars.  As an
extra argument is added, there's no danger of using the old version
unconverted.

disk_stat_lock() uses get_cpu() and returns the cpu index and all
diskstat functions which access per-cpu counters now has @cpu
argument to help RT.

This change adds RCU or preemption operations at some places but also
collapses several preemption ops into one at others.  Overall, the
performance difference should be negligible as all involved ops are
very lightweight per-cpu ones.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Tejun Heo e71bf0d0ee block: fix disk->part[] dereferencing race
disk->part[] is protected by its matching bdev's lock.  However,
non-critical accesses like collecting stats and printing out sysfs and
proc information used to be performed without any locking.  As
partitions can come and go dynamically, partitions can go away
underneath those non-critical accesses.  As some of those accesses are
writes, this theoretically can lead to silent corruption.

This patch fixes the race by using RCU for the partition array and dev
reference counter to hold partitions.

* Rename disk->part[] to disk->__part[] to make sure no one outside
  genhd layer proper accesses it directly.

* Use RCU for disk->__part[] dereferencing.

* Implement disk_{get|put}_part() which can be used to get and put
  partitions from gendisk respectively.

* Iterators are implemented to help iterate through all partitions
  safely.

* Functions which require RCU readlock are marked with _rcu suffix.

* Use disk_put_part() in __blkdev_put() instead of directly putting
  the contained kobject.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Tejun Heo 310a2c1012 block: misc updates
This patch makes the following misc updates in preparation for
disk->part dereference fix and extended block devt support.

* implment part_to_disk()

* fix comment about gendisk->part indexing

* rename get_part() to disk_map_sector()

* don't use n which is always zero while printing disk information in
  diskstats_show()

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Randy Dunlap 710027a48e Add some block/ source files to the kernel-api docbook. Fix kernel-doc notation in them as needed. Fix changed function parameter names. Fix typos/spellos. In comments, change REQ_SPECIAL to REQ_TYPE_SPECIAL and REQ_BLOCK_PC to REQ_TYPE_BLOCK_PC.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
Mikulas Patocka 5df97b91b5 drop vmerge accounting
Remove hw_segments field from struct bio and struct request. Without virtual
merge accounting they have no purpose.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
David Woodhouse e17fc0a1cc Allow elevators to sort/merge discard requests
But blkdev_issue_discard() still emits requests which are interpreted as
soft barriers, because naïve callers might otherwise issue subsequent
writes to those same sectors, which might cross on the queue (if they're
reallocated quickly enough).

Callers still _can_ issue non-barrier discard requests, but they have to
take care of queue ordering for themselves.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:02 +02:00
David Woodhouse fb2dce862d Add 'discard' request handling
Some block devices benefit from a hint that they can forget the contents
of certain sectors. Add basic support for this to the block core, along
with a 'blkdev_issue_discard()' helper function which issues such
requests.

The caller doesn't get to provide an end_io functio, since
blkdev_issue_discard() will automatically split the request up into
multiple bios if appropriate. Neither does the function wait for
completion -- it's expected that callers won't care about when, or even
_if_, the request completes. It's only a hint to the device anyway. By
definition, the file system doesn't _care_ about these sectors any more.

[With feedback from OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> and
Jens Axboe <jens.axboe@oracle.com]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:01 +02:00
David Woodhouse d628eaef31 Fix up comments about matching flags between bio and rq
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:01 +02:00
Jens Axboe 051cc3952a block: use bio_has_data() in the IO completion path
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:00 +02:00
Jens Axboe a9c701e594 block: use bio_has_data() to check for data carrying bio
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:00 +02:00
FUJITA Tomonori abf5439370 block: move cmdfilter from gendisk to request_queue
cmd_filter works only for the block layer SG_IO with SCSI block
devices. It breaks scsi/sg.c, bsg, and the block layer SG_IO with SCSI
character devices (such as st). We hit a kernel crash with them.

The problem is that cmd_filter code accesses to gendisk (having struct
blk_scsi_cmd_filter) via inode->i_bdev->bd_disk. It works for only
SCSI block device files. With character device files, inode->i_bdev
leads you to struct cdev. inode->i_bdev->bd_disk->blk_scsi_cmd_filter
isn't safe.

SCSI ULDs don't expose gendisk; they keep it private. bsg needs to be
independent on any protocols. We shouldn't change ULDs to expose their
gendisk.

This patch moves struct blk_scsi_cmd_filter from gendisk to
request_queue, a common object, which eveyone can access to.

The user interface doesn't change; users can change the filters via
/sys/block/. gendisk has a pointer to request_queue so the cmd_filter
code accesses to struct blk_scsi_cmd_filter.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-27 09:50:19 +02:00
Jens Axboe 6c5e0c4d51 block: add a blk_plug_device_unlocked() that grabs the queue lock
blk_plug_device() must be called with the queue lock held, so callers
often just grab and release the lock for that purpose. Add a helper
that does just that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-01 20:31:32 +02:00
Linus Torvalds 98339cbd36 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (80 commits)
  ide-floppy: fix unfortunate function naming
  ide-tape: unify idetape_create_read/write_cmd
  ide: add ide_pc_intr() helper
  ide-{floppy,scsi}: read Status Register before stopping DMA engine
  ide-scsi: add more debugging to idescsi_pc_intr()
  ide-scsi: use pc->callback
  ide-floppy: add more debugging to idefloppy_pc_intr()
  ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled
  ide-tape: add ide_tape_io_buffers() helper
  ide-tape: factor out DSC handling from idetape_pc_intr()
  ide-{floppy,tape}: move checking of ->failed_pc to ->callback
  ide: add ide_issue_pc() helper
  ide: add PC_FLAG_DRQ_INTERRUPT pc flag
  ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()
  ide: add ide_transfer_pc() helper
  ide-scsi: set drive->scsi flag for devices handled by the driver
  ide-{cd,floppy,tape}: remove checking for drive->scsi
  ide: add PC_FLAG_ZIP_DRIVE pc flag
  ide-tape: factor out waiting for good ireason from idetape_transfer_pc()
  ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()
  ...
2008-07-15 11:15:36 -07:00
FUJITA Tomonori 52a93ba815 block: remove the checking for NULL queue in blk_put_request
Some uses blk_put_request asymmetrically, that is, they uses it with
requests that not allocated by blk_get_request. As a result,
blk_put_request has a hack to catch a NULL request_queue. Now such
callers are fixed (they use blk_get_request properly). So we can
safely remove the hack in blk_put_request.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15 21:21:45 +02:00
Linus Torvalds 666484f025 Merge branch 'core/softirq' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core/softirq' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softirq: remove irqs_disabled warning from local_bh_enable
  softirq: remove initialization of static per-cpu variable
  Remove argument from open_softirq which is always NULL
2008-07-14 15:28:42 -07:00
Jens Axboe e48ec69005 block: extend queue_flag bitops
Add test_and_clear and test_and_set.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03 13:21:15 +02:00