Commit Graph

246 Commits

Author SHA1 Message Date
Junxiao Bi f62f12b3a4 ocfs2: reflink: fix slow unlink for refcounted file
When running ocfs2 test suite multiple nodes reflink stress test, for a
4 nodes cluster, every unlink() for refcounted file needs about 700s.

The slow unlink is caused by the contention of refcount tree lock since
all nodes are unlink files using the same refcount tree.  When the
unlinking file have many extents(over 1600 in our test), most of the
extents has refcounted flag set.  In ocfs2_commit_truncate(), it will
execute the following call trace for every extents.  This means it needs
get and released refcount tree lock about 1600 times.  And when several
nodes are do this at the same time, the performance will be very low.

  ocfs2_remove_btree_range()
  --  ocfs2_lock_refcount_tree()
  ----  ocfs2_refcount_lock()
  ------  __ocfs2_cluster_lock()

ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to
do lock/unlock once can improve a lot performance.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Wengang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-18 19:08:11 -08:00
Goldwyn Rodrigues 86b9c6f3f8 ocfs2: remove filesize checks for sync I/O journal commit
Filesize is not a good indication that the file needs to be synced.
An example where this breaks is:
 1. Open the file in O_SYNC|O_RDWR
 2. Read a small portion of the file (say 64 bytes)
 3. Lseek to starting of the file
 4. Write 64 bytes

If the node crashes, it is not written out to disk because this was not
committed in the journal and the other node which reads the file after
recovery reads stale data (even if the write on the other node was
successful)

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:03 -08:00
Linus Torvalds ac0c49396d Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF and quota updates from Jan Kara:
 "A few UDF fixes and also a few patches which are preparing filesystems
  for support of project quotas in VFS"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix loading of special inodes
  ocfs2: Back out change to use OCFS2_MAXQUOTAS in ocfs2_setattr()
  udf: remove redundant sys_tz declaration
  ocfs2: Don't use MAXQUOTAS value
  reiserfs: Don't use MAXQUOTAS value
  ext3: Don't use MAXQUOTAS value
  udf: Fix race between write(2) and close(2)
2014-10-11 08:02:31 -04:00
Junxiao Bi f775da2fc2 ocfs2: fix deadlock due to wrong locking order
For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex
osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it
will wait until jbd2 commit thread done. In order journal mode, jbd2
needs flushing dirty data pages first, and this needs get page lock.
So osb->journal->j_trans_barrier should be got before page lock.

But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this
locking order, and this will cause deadlock and hung the whole cluster.

One deadlock catched is the following:

PID: 13449  TASK: ffff8802e2f08180  CPU: 31  COMMAND: "oracle"
 #0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524
 #1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf
 #2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85
 #3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55
 #4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4
 #5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2]
 #6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2]
 #7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2]
 #8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2]
 #9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2]
 #10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2]
 #11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2]
 #12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29
 #13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1
 #14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd
 #15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142
    RIP: 00007f8de750c6f7  RSP: 00007fffe786e478  RFLAGS: 00000206
    RAX: 000000000000004d  RBX: ffffffff81515142  RCX: 0000000000000000
    RDX: 0000000000000200  RSI: 0000000000028400  RDI: 000000000000000d
    RBP: 00007fffe786e040   R8: 0000000000000000   R9: 000000000000000d
    R10: 0000000000000000  R11: 0000000000000206  R12: 000000000000000d
    R13: 00007fffe786e710  R14: 00007f8de70f8340  R15: 0000000000028400
    ORIG_RAX: 000000000000004d  CS: 0033  SS: 002b

crash64> bt
PID: 7610   TASK: ffff88100fd56140  CPU: 1   COMMAND: "ocfs2cmt"
 #0 [ffff88100f4d1c50] __schedule at ffffffff8150a524
 #1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf
 #2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2]
 #3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2]
 #4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2]
 #5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2]
 #6 [ffff88100f4d1ee8] kthread at ffffffff81090db6
 #7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284

crash64> bt
PID: 7609   TASK: ffff88100f2d4480  CPU: 0   COMMAND: "jbd2/dm-20-86"
 #0 [ffff88100def3920] __schedule at ffffffff8150a524
 #1 [ffff88100def39c8] schedule at ffffffff8150acbf
 #2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c
 #3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e
 #4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a
 #5 [ffff88100def3a58] __lock_page at ffffffff81110687
 #6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752
 #7 [ffff88100def3be8] generic_writepages at ffffffff8111b901
 #8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2]
 #9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2]
 #10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2]
 #11 [ffff88100def3ee8] kthread at ffffffff81090db6
 #12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Alex Chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:48 -04:00
Jan Kara c53f755d33 ocfs2: Back out change to use OCFS2_MAXQUOTAS in ocfs2_setattr()
ocfs2_setattr() actually needs to really use MAXQUOTAS and not
OCFS2_MAXQUOTAS since it will pass the array over to VFS. Currently
this isn't a problem since MAXQUOTAS == OCFS2_MAXQUOTAS but it would
be once we introduce project quotas.

CC: Mark Fasheh <mfasheh@suse.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-30 18:09:59 +02:00
Jan Kara 52362810be ocfs2: Don't use MAXQUOTAS value
MAXQUOTAS value defines maximum number of quota types VFS supports.
This isn't necessarily the number of types ocfs2 supports and with
addition of project quotas these two numbers stop matching. So make
ocfs2 use its private definition.

CC: Mark Fasheh <mfasheh@suse.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-17 11:59:12 +02:00
Linus Torvalds 16b9057804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "This the bunch that sat in -next + lock_parent() fix.  This is the
  minimal set; there's more pending stuff.

  In particular, I really hope to get acct.c fixes merged this cycle -
  we need that to deal sanely with delayed-mntput stuff.  In the next
  pile, hopefully - that series is fairly short and localized
  (kernel/acct.c, fs/super.c and fs/namespace.c).  In this pile: more
  iov_iter work.  Most of prereqs for ->splice_write with sane locking
  order are there and Kent's dio rewrite would also fit nicely on top of
  this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
  lock_parent: don't step on stale ->d_parent of all-but-freed one
  kill generic_file_splice_write()
  ceph: switch to iter_file_splice_write()
  shmem: switch to iter_file_splice_write()
  nfs: switch to iter_splice_write_file()
  fs/splice.c: remove unneeded exports
  ocfs2: switch to iter_file_splice_write()
  ->splice_write() via ->write_iter()
  bio_vec-backed iov_iter
  optimize copy_page_{to,from}_iter()
  bury generic_file_aio_{read,write}
  lustre: get rid of messing with iovecs
  ceph: switch to ->write_iter()
  ceph_sync_direct_write: stop poking into iov_iter guts
  ceph_sync_read: stop poking into iov_iter guts
  new helper: copy_page_from_iter()
  fuse: switch to ->write_iter()
  btrfs: switch to ->write_iter()
  ocfs2: switch to ->write_iter()
  xfs: switch to ->write_iter()
  ...
2014-06-12 10:30:18 -07:00
Al Viro 6dc8bc0fb3 ocfs2: switch to iter_file_splice_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-12 00:21:10 -04:00
Matthew Wilcox 1b938c0827 fs/buffer.c: remove block_write_full_page_endio()
The last in-tree caller of block_write_full_page_endio() was removed in
January 2013.  It's time to remove the EXPORT_SYMBOL, which leaves
block_write_full_page() as the only caller of
block_write_full_page_endio(), so inline block_write_full_page_endio()
into block_write_full_page().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:02 -07:00
Al Viro 3ef045c3d8 ocfs2: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:39:40 -04:00
Al Viro 3cd9ad5a30 ocfs2: switch to ->read_iter()
tracepoints are evil, exhibit #6969...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:37:57 -04:00
Al Viro 0c949334a9 iov_iter_truncate()
Now It Can Be Done(tm) - we don't need to do iov_shorten() in
generic_file_direct_write() anymore, now that all ->direct_IO()
instances are converted to proper iov_iter methods and honour
iter->count and iter->iov_offset properly.

Get rid of count/ocount arguments of generic_file_direct_write(),
while we are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:54 -04:00
Al Viro 71d8e532b1 start adding the tag to iov_iter
For now, just use the same thing we pass to ->direct_IO() - it's all
iovec-based at the moment.  Pass it explicitly to iov_iter_init() and
account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO()
uses.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:49 -04:00
Al Viro cb66a7a1f1 kill generic_segment_checks()
all callers of ->aio_read() and ->aio_write() have iov/nr_segs already
checked - generic_segment_checks() done after that is just an odd way
to spell iov_length().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:43 -04:00
Al Viro f8579f8673 generic_file_direct_write(): switch to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:42 -04:00
Linus Torvalds 5166701b36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...
2014-04-12 14:49:50 -07:00
Darrick J. Wong 6fdb702d62 ocfs2: call ocfs2_update_inode_fsync_trans when updating any inode
Ensure that ocfs2_update_inode_fsync_trans() is called any time we touch
an inode in a given transaction.  This is a follow-on to the previous
patch to reduce lock contention and deadlocking during an fsync
operation.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Wengang <wen.gang.wang@oracle.com>
Cc: Greg Marsden <greg.marsden@oracle.com>
Cc: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:56 -07:00
Jensen c8d888d9f1 ocfs2: llseek requires ocfs2 inode lock for the file in SEEK_END
llseek requires ocfs2 inode lock for updating the file size in SEEK_END.
because the file size maybe update on another node.

This bug can be reproduce the following scenario: at first, we dd a test
fileA, the file size is 10k.

on NodeA:
---------
 1) open the test fileA, lseek the end of file. and print the position.
 2) close the test fileA

on NodeB:
 1) open the test fileA, append the 5k data to test FileA.
 2) lseek the end of file. and print the position.
 3) close file.

At first we run the test program1 on NodeA , the result is 10k.  And
then run the test program2 on NodeB, the result is 15k.  At last, we run
the test program1 on NodeA again, the result is 10k.

After applying this patch the three step result is 15k.

test result: 1000000 times lseek call;
index        lseek with inode lock (unit:us)                lseek without inode lock (unit:us)
  1                   1168162                                    555383
  2                   1168011                                    549504
  3                   1170538                                    549396
  4                   1170375                                    551685
  5                   1170444                                    556719
  6                   1174364                                    555307
  7                   1163294                                    551552
  8                   1170080                                    549350
  9                   1162464                                    553700
 10                   1165441                                    552594
 avg                  1168317                                    552519

avg with lock - avg without lock = 615798
(avg with lock - avg without lock)/1000000=0.615798 us

Signed-off-by: Jensen <shencanquan@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:55 -07:00
Darrick J. Wong 2931cdcb49 ocfs2: improve fsync efficiency and fix deadlock between aio_write and sync_file
Currently, ocfs2_sync_file grabs i_mutex and forces the current journal
transaction to complete.  This isn't terribly efficient, since sync_file
really only needs to wait for the last transaction involving that inode
to complete, and this doesn't require i_mutex.

Therefore, implement the necessary bits to track the newest tid
associated with an inode, and teach sync_file to wait for that instead
of waiting for everything in the journal to commit.  Furthermore, only
issue the flush request to the drive if jbd2 hasn't already done so.

This also eliminates the deadlock between ocfs2_file_aio_write() and
ocfs2_sync_file().  aio_write takes i_mutex then calls
ocfs2_aiodio_wait() to wait for unaligned dio writes to finish.
However, if that dio completion involves calling fsync, then we can get
into trouble when some ocfs2_sync_file tries to take i_mutex.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:53 -07:00
Wengang Wang c18ceab012 ocfs2: change ip_unaligned_aio to of type mutex from atomit_t
There is a problem that waitqueue_active() may check stale data thus miss
a wakeup of threads waiting on ip_unaligned_aio.

The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to
be of type mutex thus the above prolem is avoid.  Another benifit is that
mutex which works as FIFO is fairer than wake_up_all().

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:53 -07:00
Al Viro 58bfab395b ocfs2_file_aio_write(): switch to generic_perform_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:37 -04:00
Al Viro 5cb6c6c7eb generic_file_direct_write(): get rid of ppos argument
always equal to &iocb->ki_pos.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:35 -04:00
Al Viro fcacafd269 kill the 5th argument of generic_file_buffered_write()
same story - it's &iocb->ki_pos in all cases

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:34 -04:00
Al Viro 1b56e98990 ocfs2 syncs the wrong range...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-03-10 11:43:32 -04:00
Junxiao Bi c7d2cbc364 ocfs2: update inode size after zeroing the hole
fs-writeback will release the dirty pages without page lock whose offset
are over inode size, the release happens at
block_write_full_page_endio().  If not update, dirty pages in file holes
may be released before flushed to the disk, then file holes will contain
some non-zero data, this will cause sparse file md5sum error.

To reproduce the bug, find a big sparse file with many holes, like vm
image file, its actual size should be bigger than available mem size to
make writeback work more frequently, tar it with -S option, then keep
untar it and check its md5sum again and again until you get a wrong
md5sum.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Younger Liu <younger.liu@huawei.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:43 -08:00
Younger Liu d62e74be12 ocfs2: fix issue that ocfs2_setattr() does not deal with new_i_size==i_size
The issue scenario is as following:

- Create a small file and fallocate a large disk space for a file with
  FALLOC_FL_KEEP_SIZE option.

- ftruncate the file back to the original size again.  but the disk free
  space is not changed back.  This is a real bug that be fixed in this
  patch.

In order to solve the issue above, we modified ocfs2_setattr(), if
attr->ia_size != i_size_read(inode), It calls ocfs2_truncate_file(), and
truncate disk space to attr->ia_size.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Tested-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: Jensen <shencanquan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:43 -08:00
Younger Liu a987c7ca7f ocfs2: fix ocfs2_sync_file() if filesystem is readonly
If filesystem is readonly, there is no need to flush drive's caches or
force any uncommitted transactions.

[akpm@linux-foundation.org: return -EROFS, not 0]
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:42 -08:00
Linus Torvalds bf3d846b78 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Assorted stuff; the biggest pile here is Christoph's ACL series.  Plus
  assorted cleanups and fixes all over the place...

  There will be another pile later this week"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
  __dentry_path() fixes
  vfs: Remove second variable named error in __dentry_path
  vfs: Is mounted should be testing mnt_ns for NULL or error.
  Fix race when checking i_size on direct i/o read
  hfsplus: remove can_set_xattr
  nfsd: use get_acl and ->set_acl
  fs: remove generic_acl
  nfs: use generic posix ACL infrastructure for v3 Posix ACLs
  gfs2: use generic posix ACL infrastructure
  jfs: use generic posix ACL infrastructure
  xfs: use generic posix ACL infrastructure
  reiserfs: use generic posix ACL infrastructure
  ocfs2: use generic posix ACL infrastructure
  jffs2: use generic posix ACL infrastructure
  hfsplus: use generic posix ACL infrastructure
  f2fs: use generic posix ACL infrastructure
  ext2/3/4: use generic posix ACL infrastructure
  btrfs: use generic posix ACL infrastructure
  fs: make posix_acl_create more useful
  fs: make posix_acl_chmod more useful
  ...
2014-01-28 08:38:04 -08:00
Christoph Hellwig 702e5bc68a ocfs2: use generic posix ACL infrastructure
This contains some major refactoring for the create path so that
inodes are created with the right mode to start with instead of
fixing it up later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25 23:58:21 -05:00
Tariq Saeed a2a3b39824 ocfs2: punch hole should return EINVAL if the length argument in ioctl is negative
An unreserve space ioctl OCFS2_IOC_UNRESVSP/64 should reject a negative
length.

Orabug:14789508

Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:42 -08:00
Junxiao Bi f0cb0f0bca fs/ocfs2/file.c: fix wrong comment
Unwritten extent only exists for file systems which support holes.  But
the comment said was opposite meaning and also the comment is not very
clear, so rephase it.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:00 +09:00
Goldwyn Rodrigues 06f9da6e82 fs/ocfs2: remove unnecessary variable bits_wanted from ocfs2_calc_extend_credits
Code cleanup to remove unnecessary variable passed but never used
to ocfs2_calc_extend_credits.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:00 +09:00
Linus Torvalds 9bf12df31f Merge git://git.kvack.org/~bcrl/aio-next
Pull aio changes from Ben LaHaise:
 "First off, sorry for this pull request being late in the merge window.
  Al had raised a couple of concerns about 2 items in the series below.
  I addressed the first issue (the race introduced by Gu's use of
  mm_populate()), but he has not provided any further details on how he
  wants to rework the anon_inode.c changes (which were sent out months
  ago but have yet to be commented on).

  The bulk of the changes have been sitting in the -next tree for a few
  months, with all the issues raised being addressed"

* git://git.kvack.org/~bcrl/aio-next: (22 commits)
  aio: rcu_read_lock protection for new rcu_dereference calls
  aio: fix race in ring buffer page lookup introduced by page migration support
  aio: fix rcu sparse warnings introduced by ioctx table lookup patch
  aio: remove unnecessary debugging from aio_free_ring()
  aio: table lookup: verify ctx pointer
  staging/lustre: kiocb->ki_left is removed
  aio: fix error handling and rcu usage in "convert the ioctx list to table lookup v3"
  aio: be defensive to ensure request batching is non-zero instead of BUG_ON()
  aio: convert the ioctx list to table lookup v3
  aio: double aio_max_nr in calculations
  aio: Kill ki_dtor
  aio: Kill ki_users
  aio: Kill unneeded kiocb members
  aio: Kill aio_rw_vect_retry()
  aio: Don't use ctx->tail unnecessarily
  aio: io_cancel() no longer returns the io_event
  aio: percpu ioctx refcount
  aio: percpu reqs_available
  aio: reqs_active -> reqs_available
  aio: fix build when migration is disabled
  ...
2013-09-13 10:55:58 -07:00
Younger Liu 7aebff18b9 ocfs2: free path in ocfs2_remove_inode_range()
In ocfs2_remove_inode_range(), there is a memory leak.  The variable path
has allocated memory with ocfs2_new_path_from_et(), but it is not free.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:56:50 -07:00
Younger Liu 2b1e55c389 ocfs2: lighten up allocate transaction
The issue scenario is as following:

When fallocating a very large disk space for a small file,
__ocfs2_extend_allocation attempts to get a very large transaction.  For
some journal sizes, there may be not enough room for this transaction,
and the fallocate will fail.

The patch below extends & restarts the transaction as necessary while
allocating space, and should work with even the smallest journal.  This
patch refers ext4 resize.

Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc
...(jounral size is 32M)
# mount.ocfs2 /dev/sdc /mnt/ocfs2/
# touch /mnt/ocfs2/1.log
# fallocate -o 0 -l 400G /mnt/ocfs2/1.log
fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory
# tail -f /var/log/messages
[ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048)
[ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12
[ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12
[ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12
^C
With this patch, the test works well.

Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:56:28 -07:00
Tiger Yang c7dd3392ad ocfs2: fix NULL pointer dereference in ocfs2_duplicate_clusters_by_page
Since ocfs2_cow_file_pos will invoke ocfs2_refcount_icow with a NULL as
the struct file pointer, it finally result in a null pointer dereference
in ocfs2_duplicate_clusters_by_page.

This patch replace file pointer with inode pointer in
cow_duplicate_clusters to fix this issue.

[jeff.liu@oracle.com: rebased patch against linux-next tree]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Tao Ma <tm@tao.ma>
Tested-by: David Weber <wb@munzinger.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:49 -07:00
Kent Overstreet 73a7075e3f aio: Kill aio_rw_vect_retry()
This code doesn't serve any purpose anymore, since the aio retry
infrastructure has been removed.

This change should be safe because aio_read/write are also used for
synchronous IO, and called from do_sync_read()/do_sync_write() - and
there's no looping done in the sync case (the read and write syscalls).

Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30 11:53:12 -04:00
Jie Liu 46a1c2c7ae vfs: export lseek_execute() to modules
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support
SEEK_DATA/SEEK_HOLE functions, we end up handling the similar
matter in lseek_execute() to update the current file offset
to the desired offset if it is valid, ceph also does the
simliar things at ceph_llseek().

To reduce the duplications, this patch make lseek_execute()
public accessible so that we can call it directly from the
underlying file systems.

Thanks Dave Chinner for this suggestion.

[AV: call it vfs_setpos(), don't bring the removed 'inode' argument back]

v2->v1:
- Add kernel-doc comments for lseek_execute()
- Call lseek_execute() in ceph->llseek()

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-03 16:23:27 +04:00
Al Viro 3704412bdb [readdir] convert ocfs2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:57:02 +04:00
Joseph Qi afe1bb73f8 ocfs2: unlock rw lock if inode lock failed
In ocfs2_file_aio_write(), it does ocfs2_rw_lock() first and then
ocfs2_inode_lock().

But if ocfs2_inode_lock() failed, it goes to out_sems without unlocking
rw lock.  This will cause a bug in ocfs2_lock_res_free() when testing
res->l_ex_holders, which is increased in __ocfs2_cluster_lock() and
decreased in __ocfs2_cluster_unlock().

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: "Duyongfeng (B)" <du.duyongfeng@huawei.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24 16:22:51 -07:00
Al Viro 72b0d9aacb pipe: don't use ->i_mutex
now it can be done - put mutex into pipe_inode_info, use it instead
of ->i_mutex

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:00 -04:00
Al Viro 8d71db4f08 lift sb_start_write/sb_end_write out of ->aio_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:12:55 -04:00
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Al Viro 182be68478 kill f_vfsmnt
very few users left...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-26 02:46:10 -05:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Eric W. Biederman 488c8ef033 ocfs2: Compare kuids and kgids using uid_eq and gid_eq
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:01:00 -08:00
Eric W. Biederman ba6135609c ocfs2: For tracing report the uid and gid values in the initial user namespace
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:00:59 -08:00
Marco Stornelli a6ff03771e ocfs2: drop vmtruncate
Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-20 14:00:01 -05:00
Andrew Morton 965c8e59cf lseek: the "whence" argument is called "whence"
But the kernel decided to call it "origin" instead.  Fix most of the
sites.

Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:12 -08:00
Namjae Jeon d0e1d66b5a writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr()
There is no reason to pass the nr_pages_dirtied argument, because
nr_pages_dirtied value from the caller is unused in
balance_dirty_pages_ratelimited_nr().

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:21 -08:00