Commit Graph

708 Commits

Author SHA1 Message Date
Jakub Kicinski 83c9e13aa3 netdevsim: add software driver for testing offloads
To be able to run selftests without any hardware required we
need a software model.  The model can also serve as an example
implementation for those implementing actual HW offloads.
The dummy driver have previously been extended to test SR-IOV,
but the general consensus seems to be against adding further
features to it.

Add a new driver for purposes of software modelling only.
eBPF and SR-IOV will be added here shortly, others are invited
to further extend the driver with their offload models.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-03 00:27:57 +01:00
Amir Levy e69b6c02b4 net: Add support for networking over Thunderbolt cable
ThunderboltIP is a protocol created by Apple to tunnel IP/ethernet
traffic over a Thunderbolt cable. The protocol consists of configuration
phase where each side sends ThunderboltIP login packets (the protocol is
determined by UUID in the XDomain packet header) over the configuration
channel. Once both sides get positive acknowledgment to their login
packet, they configure high-speed DMA path accordingly. This DMA path is
then used to transmit and receive networking traffic.

This patch creates a virtual ethernet interface the host software can
use in the same way as any other networking interface. Once the
interface is brought up successfully network packets get tunneled over
the Thunderbolt cable to the remote host and back.

The connection is terminated by sending a ThunderboltIP logout packet
over the configuration channel. We do this when the network interface is
brought down by user or the driver is unloaded.

Signed-off-by: Amir Levy <amir.jer.levy@intel.com>
Signed-off-by: Michael Jamet <michael.jamet@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02 11:24:42 -07:00
Juergen Gross ecda85e702 x86/lguest: Remove lguest support
Lguest seems to be rather unused these days. It has seen only patches
ensuring it still builds the last two years and its official state is
"Odd Fixes".

Remove it in order to be able to clean up the paravirt code.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: boris.ostrovsky@oracle.com
Cc: lguest@lists.ozlabs.org
Cc: rusty@rustcorp.com.au
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-24 09:57:28 +02:00
Gerard Garcia 0b2e66448b VSOCK: Add vsockmon device
Add vsockmon virtual network device that receives packets from the vsock
transports and exposes them to user space.

Based on the nlmon device.

Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24 12:35:56 -04:00
Arnd Bergmann fbdf0e28d0 vmxnet3: prevent building with 64K pages
I got a warning about broken code on ARM64 with 64K pages:

drivers/net/vmxnet3/vmxnet3_drv.c: In function 'vmxnet3_rq_init':
drivers/net/vmxnet3/vmxnet3_drv.c:1679:29: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
    rq->buf_info[0][i].len = PAGE_SIZE;

'len' here is a 16-bit integer, so this clearly won't work. I don't think
this driver is used much on anything other than x86, so there is no need
to fix this properly and we can work around it with a Kconfig dependency
to forbid known-broken configurations. qemu in theory supports it on
other architectures too, but presumably only for compatibility with x86
guests that also run on vmware.

CONFIG_PAGE_SIZE_64KB is used on hexagon, mips, sh and tile, the other
symbols are architecture-specific names for the same thing.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17 15:25:49 -05:00
Sainath Grandhi 235a9d89da ipvtap: IP-VLAN based tap driver
This patch adds a tap character device driver that is based on the
IP-VLAN network interface, called ipvtap. An ipvtap device can be created
in the same way as an ipvlan device, using 'type ipvtap', and then accessed
using the tap user space interface.

Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11 20:59:41 -05:00
Sainath Grandhi 9a393b5d59 tap: tap as an independent module
This patch makes tap a separate module for other types of virtual interfaces, for example,
ipvlan to use.

Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11 20:59:41 -05:00
Eric Dumazet 97e219b7c1 gro_cells: move to net/core/gro_cells.c
We have many gro cells users, so lets move the code to avoid
duplication.

This creates a CONFIG_GRO_CELLS option.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08 14:38:18 -05:00
Mahesh Bandewar cf714ac147 ipvlan: Fix dependency issue
kbuild-build-bot reported that if NETFILTER is not selected, the
build fails pointing to netfilter symbols.

Fixes: 4fbae7d83c ("ipvlan: Introduce l3s mode")

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 22:55:23 -04:00
Mahesh Bandewar 4fbae7d83c ipvlan: Introduce l3s mode
In a typical IPvlan L3 setup where master is in default-ns and
each slave is into different (slave) ns. In this setup egress
packet processing for traffic originating from slave-ns will
hit all NF_HOOKs in slave-ns as well as default-ns. However same
is not true for ingress processing. All these NF_HOOKs are
hit only in the slave-ns skipping them in the default-ns.
IPvlan in L3 mode is restrictive and if admins want to deploy
iptables rules in default-ns, this asymmetric data path makes it
impossible to do so.

This patch makes use of the l3_rcv() (added as part of l3mdev
enhancements) to perform input route lookup on RX packets without
changing the skb->dev and then uses nf_hook at NF_INET_LOCAL_IN
to change the skb->dev just before handing over skb to L4.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 01:25:22 -04:00
Pablo Neira 459aa660eb gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)
This is an initial implementation of a netdev driver for GTP datapath
(GTP-U) v0 and v1, according to the GSM TS 09.60 and 3GPP TS 29.060
standards. This tunneling protocol is used to prevent subscribers from
accessing mobile carrier core network infrastructure.

This implementation requires a GGSN userspace daemon that implements the
signaling protocol (GTP-C), such as OpenGGSN [1]. This userspace daemon
updates the PDP context database that represents active subscriber
sessions through a genetlink interface.

For more context on this tunneling protocol, you can check the slides
that were presented during the NetDev 1.1 [2].

Only IPv4 is supported at this time.

[1] http://git.osmocom.org/openggsn/
[2] http://www.netdevconf.org/1.1/proceedings/slides/schultz-welte-osmocom-gtp.pdf

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 12:25:04 -04:00
Ivan Babrou 9f5db53507 net: dummy: remove note about being Y by default
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 01:11:55 -04:00
Arnd Bergmann ab2ed0171a macsec: fix crypto Kconfig dependency
The new MACsec driver uses the AES crypto algorithm, but can be configured
even if CONFIG_CRYPTO is disabled, leading to a build error:

warning: (MAC80211 && MACSEC) selects CRYPTO_GCM which has unmet direct dependencies (CRYPTO)
warning: (BT && CEPH_LIB && INET && MAC802154 && MAC80211 && BLK_DEV_RBD && MACSEC && AIRO_CS && LIBIPW && HOSTAP && USB_WUSB && RTLLIB_CRYPTO_CCMP && FS_ENCRYPTION && EXT4_ENCRYPTION && CEPH_FS && BIG_KEYS && ENCRYPTED_KEYS) selects CRYPTO_AES which has unmet direct dependencies (CRYPTO)
crypto/built-in.o: In function `gcm_enc_copy_hash':
aes_generic.c:(.text+0x2b8): undefined reference to `crypto_xor'
aes_generic.c:(.text+0x2dc): undefined reference to `scatterwalk_map_and_copy'

This adds an explicit 'select CRYPTO' statement the way that other
drivers handle it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17 18:39:02 -04:00
Sabrina Dubroca c09440f7dc macsec: introduce IEEE 802.1AE driver
This is an implementation of MACsec/IEEE 802.1AE.  This driver
provides authentication and encryption of traffic in a LAN, typically
with GCM-AES-128, and optional replay protection.

http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 22:40:24 -04:00
David Ahern 35402e3136 net: Add IPv6 support to VRF device
Add support for IPv6 to VRF device driver. Implemenation parallels what
has been done for IPv4.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13 04:55:07 -07:00
David Ahern ee15ee5d94 net: Add support for l3mdev ops to VRF driver
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 20:40:33 -07:00
Pravin B Shelar 371bd1061d geneve: Consolidate Geneve functionality in single module.
geneve_core module handles send and receive functionality.
This way OVS could use the Geneve API. Now with use of
tunnel meatadata mode OVS can directly use Geneve netdevice.
So there is no need for separate module for Geneve. Following
patch consolidates Geneve protocol processing in single module.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 15:42:48 -07:00
Taku Izumi 658d439b22 fjes: Introduce FUJITSU Extended Socket Network Device driver
This patch adds the basic code of FUJITSU Extended Socket
Network Device driver.

When "PNP0C02" is found in ACPI DSDT, it evaluates "_STR"
to check if "PNP0C02" is for Extended Socket device driver
and retrieves ACPI resource information. Then creates
platform_device.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24 14:06:33 -07:00
Johannes Berg 5377d75823 virtio_net: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in no change in code
size for me, but reduces the struct receive_queue size by the two
unsigned long values that store the parameters.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:22 -07:00
David Ahern 193125dbd8 net: Introduce VRF device driver
This driver borrows heavily from IPvlan and teaming drivers.

Routing domains (VRF-lite) are created by instantiating a VRF master
device with an associated table and enslaving all routed interfaces that
participate in the domain. As part of the enslavement, all connected
routes for the enslaved devices are moved to the table associated with
the VRF device. Outgoing sockets must bind to the VRF device to function.

Standard FIB rules bind the VRF device to tables and regular fib rule
processing is followed. Routed traffic through the box, is forwarded by
using the VRF device as the IIF and following the IIF rule to a table
that is mated with the VRF.

Example:

   Create vrf 1:
     ip link add vrf1 type vrf table 5
     ip rule add iif vrf1 table 5
     ip rule add oif vrf1 table 5
     ip route add table 5 prohibit default
     ip link set vrf1 up

   Add interface to vrf 1:
     ip link set eth1 master vrf1

Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 22:43:22 -07:00
Linus Torvalds 6d7c8e1b3a A very significant modification to NTB in this series.
An abstraction layer was added to allow the hardware and clients to be
 easily added.  This required rewriting the NTB transport layer for this
 abstraction layer.  This modification will allow future
 "high performance" NTB clients.
 
 In addition to this change, a number of performance modifications were
 added.  These changes include NUMA enablement, using CPU memcpy instead
 of asyncdma, and modification of NTB layer MTU size.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVmCNDAAoJEG5mS6x6i9IjI/QQAINNe7XCENdIL8iQZU2NDWCB
 BmVhQjKKnS5d774qrCIc/29FoxolTo4MG5H7j1zyGUUrx0mWbjrvRMA4AGt+yE0p
 Xf4DvFUi+Ptmf/dxlzxwt7ySBAQtAJiPRK0xJjEUqXpJqR/u5eTcsG2og7rXnXE1
 DHtgqmh05D4Noi725yyn4qqVrqnUnFtgJ0hp6s7BE5ReeNPJNrD5yRpByEH81TBw
 +FiUHoCIuhZ4taGbfUU3G6lbBoWqztV8RmjI1AQGRGiij5BmYNZUBTEuSoEt86Df
 jxoLIz+77A9SGKejSmZbomeeBT3FnlnwHurC8hKdlqF05m3BebiTlCGEmddUdRAa
 u+8v/z5lmCaxH2Bg0rdQFn1HIvwtnToT4N3nfRtOkywg8tDHfYv2s1IaGO9bosJn
 XaIS5TR548IgEcsrIjJPX8ab/Q7nBUPkhaIEtXLyPdo41rON7J8aaJnv7bjPq/22
 BoHU8fIoiYjIsiDPpsIgRAEXSTz8pr3uHU68NDR8R8pzf9OoysZQV9vy7N04YKTy
 3Hr+AtEmiPel9YIx9Z8rgvLoMzP/nyxecJeFqUQpLkVR5YWdI50eg5TO9lBMU6Io
 hqROco8RUxJDC5J3IE75eWpc2YIxUsNo+5IFsxbNJ78OnY6GiF+pWnKx5rxwxs/G
 YHILdVMg/OBbVX3+fvJV
 =CyfQ
 -----END PGP SIGNATURE-----

Merge tag 'ntb-4.2' of git://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "This includes a pretty significant reworking of the NTB core code, but
  has already produced some significant performance improvements.

  An abstraction layer was added to allow the hardware and clients to be
  easily added.  This required rewriting the NTB transport layer for
  this abstraction layer.  This modification will allow future "high
  performance" NTB clients.

  In addition to this change, a number of performance modifications were
  added.  These changes include NUMA enablement, using CPU memcpy
  instead of asyncdma, and modification of NTB layer MTU size"

* tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits)
  NTB: Add split BAR output for debugfs stats
  NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe
  NTB: Print driver name and version in module init
  NTB: Increase transport MTU to 64k from 16k
  NTB: Rename Intel code names to platform names
  NTB: Default to CPU memcpy for performance
  NTB: Improve performance with write combining
  NTB: Use NUMA memory in Intel driver
  NTB: Use NUMA memory and DMA chan in transport
  NTB: Rate limit ntb_qp_link_work
  NTB: Add tool test client
  NTB: Add ping pong test client
  NTB: Add parameters for Intel SNB B2B addresses
  NTB: Reset transport QP link stats on down
  NTB: Do not advance transport RX on link down
  NTB: Differentiate transport link down messages
  NTB: Check the device ID to set errata flags
  NTB: Enable link for Intel root port mode in probe
  NTB: Read peer info from local SPAD in transport
  NTB: Split ntb_hw_intel and ntb_transport drivers
  ...
2015-07-04 14:07:47 -07:00
Linus Torvalds 5fc835284d virtio/vhost: cross endian support
I have just queued some more bugfix patches today but none fix regressions and
 none are related to these ones, so it looks like a good time for a merge for
 -rc1.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVk7JOAAoJECgfDbjSjVRpHgEIAKrgLd7gIQ8lO+LCYqne6WLQ
 Ky8rOUnaxX4gD5N0akhfJFr/m/yIyAfk9+ALZZUo3kfuFiEsT2rn32iK/2Gj8pcu
 HFoAWhS+7b/ZsfpHRPtv/zVD3q4c3nWsWpfWK09J+4t0UJuC8fmGMoBzkS0kjZtd
 dQnHlJi5+1u4ch2x9sYYeVx7GOJ8a1W0q7cWJnWdOffWLEP9/zB8fgRVLFp/7AAd
 uBlza93RU81wS7q5tSUph6ESPqt2yu357e//4jnWjVx5EUXDRBL3A/T1JpC1qYSn
 WV2Gv14x+LVz2G8WgGmwfMq1H9Dvd/OzNToX5R8SIRx6Rh5L6gxFQjqt4dclGj8=
 =nKap
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio/vhost cross endian support from Michael Tsirkin:
 "I have just queued some more bugfix patches today but none fix
  regressions and none are related to these ones, so it looks like a
  good time for a merge for -rc1.

  The motivation for this is support for legacy BE guests on the new LE
  hosts.  There are two redeeming properties that made me merge this:

   - It's a trivial amount of code: since we wrap host/guest accesses
     anyway, almost all of it is well hidden from drivers.

   - Sane platforms would never set flags like VHOST_CROSS_ENDIAN_LEGACY,
     and when it's clear, there's zero overhead (as some point it was
     tested by compiling with and without the patches, got the same
     stripped binary).

  Maybe we could create a Kconfig symbol to enforce the second point:
  prevent people from enabling it eg on x86.  I will look into this"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-pci: alloc only resources actually used.
  macvtap/tun: cross-endian support for little-endian hosts
  vhost: cross-endian support for legacy devices
  virtio: add explicit big-endian support to memory accessors
  vhost: introduce vhost_is_little_endian() helper
  vringh: introduce vringh_is_little_endian() helper
  macvtap: introduce macvtap_is_little_endian() helper
  tun: add tun_is_little_endian() helper
  virtio: introduce virtio_is_little_endian() helper
2015-07-03 16:02:25 -07:00
Allen Hubbe ec110bc7cc NTB: Move files in preparation for NTB abstraction
This patch only moves files to their new locations, before applying the
next two patches adding the NTB Abstraction layer.  Splitting this patch
from the next is intended make distinct which code is changed only due
to moving the files, versus which are substantial code changes in adding
the NTB Abstraction layer.

Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-02 10:09:23 -04:00
Greg Kurz 8b8e658b16 macvtap/tun: cross-endian support for little-endian hosts
The VNET_LE flag was introduced to fix accesses to virtio 1.0 headers
that are always little-endian. It can also be used to handle the special
case of a legacy little-endian device implemented by a big-endian host.

Let's add a flag and ioctls for big-endian devices as well. If both flags
are set, little-endian wins.

Since this is isn't a common usecase, the feature is controlled by a kernel
config option (not set by default).

Both macvtap and tun are covered by this patch since they share the same
API with userland.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2015-06-01 15:48:56 +02:00
John W. Linville 2d07dc79fe geneve: add initial netdev driver for GENEVE tunnels
This is an initial implementation of a netdev driver for GENEVE
tunnels.  This implementation uses a fixed UDP port, and only supports
point-to-point links with specific partner endpoints.  Only IPv4
links are supported at this time.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 15:59:13 -04:00
Mahesh Bandewar f4c2b7a081 ipvlan: Fix text that talks about ip util support
ipvlan was added into 3.19 release and iproute2 added support
for the same in iproute2-3.19 package.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 16:35:44 -05:00
Pranith Kumar 83fe27ea53 rcu: Make SRCU optional by using CONFIG_SRCU
SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.

If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.

   text    data     bss     dec     hex filename
   2007       0       0    2007     7d7 kernel/rcu/srcu.o

Size of arch/powerpc/boot/zImage changes from

   text    data     bss     dec     hex filename
 831552   64180   23944  919676   e087c arch/powerpc/boot/zImage : before
 829504   64180   23952  917636   e0084 arch/powerpc/boot/zImage : after

so the savings are about ~2000 bytes.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2015-01-06 11:04:29 -08:00
Mahesh Bandewar 265de6d19c ipvlan: ipvlan depends on INET and IPV6
This driver uses ip_out_local() and ip6_route_output() which are
defined only if CONFIG_INET and CONFIG_IPV6 are enabled respectively.

Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29 20:53:05 -08:00
Mahesh Bandewar 2ad7bf3638 ipvlan: Initial check-in of the IPVLAN driver.
This driver is very similar to the macvlan driver except that it
uses L3 on the frame to determine the logical interface while
functioning as packet dispatcher. It inherits L2 of the master
device hence the packets on wire will have the same L2 for all
the packets originating from all virtual devices off of the same
master device.

This driver was developed keeping the namespace use-case in
mind. Hence most of the examples given here take that as the
base setup where main-device belongs to the default-ns and
virtual devices are assigned to the additional namespaces.

The device operates in two different modes and the difference
in these two modes in primarily in the TX side.

(a) L2 mode : In this mode, the device behaves as a L2 device.
TX processing upto L2 happens on the stack of the virtual device
associated with (namespace). Packets are switched after that
into the main device (default-ns) and queued for xmit.

RX processing is simple and all multicast, broadcast (if
applicable), and unicast belonging to the address(es) are
delivered to the virtual devices.

(b) L3 mode : In this mode, the device behaves like a L3 device.
TX processing upto L3 happens on the stack of the virtual device
associated with (namespace). Packets are switched to the
main-device (default-ns) for the L2 processing. Hence the routing
table of the default-ns will be used in this mode.

RX processins is somewhat similar to the L2 mode except that in
this mode only Unicast packets are delivered to the virtual device
while main-dev will handle all other packets.

The devices can be added using the "ip" command from the iproute2
package -

	ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24 15:29:18 -05:00
Ben Hutchings de11b0e8c5 drivers/net: macvtap and tun depend on INET
These drivers now call ipv6_proxy_select_ident(), which is defined
only if CONFIG_INET is enabled.  However, they have really depended
on CONFIG_INET for as long as they have allowed sending GSO packets
from userland.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: f43798c276 ("tun: Allow GSO using virtio_net_hdr")
Fixes: b9fb9ee07e ("macvtap: add GSO/csum offload support")
Fixes: 5188cd44c5 ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets")
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30 23:50:26 -04:00
Andy Zhou 7c5df8fa19 openvswitch: fix a compilation error when CONFIG_INET is not setW!
Fix a openvswitch compilation error when CONFIG_INET is not set:

=====================================================
   In file included from include/net/geneve.h:4:0,
                       from net/openvswitch/flow_netlink.c:45:
		          include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads':
			  >> include/net/udp_tunnel.h💯2: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration]
			  >>      return iptunnel_handle_offloads(skb, udp_csum, type);
			  >>           ^
			  >>           >> include/net/udp_tunnel.h💯2: warning: return makes pointer from integer without a cast
			  >>           >>    cc1: some warnings being treated as errors

=====================================================

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 00:10:49 -04:00
Tom Herbert 3ee64f39be vxlan: Call udp_sock_create
In vxlan driver call common function udp_sock_create to create the
listener UDP port.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-14 16:12:15 -07:00
Eric W. Biederman 9c62a68d13 netpoll: Remove dead packet receive code (CONFIG_NETPOLL_TRAP)
The netpoll packet receive code only becomes active if the netpoll
rx_skb_hook is implemented, and there is not a single implementation
of the netpoll rx_skb_hook in the kernel.

All of the out of tree implementations I have found all call
netpoll_poll which was removed from the kernel in 2011, so this
change should not add any additional breakage.

There are problems with the netpoll packet receive code.  __netpoll_rx
does not call dev_kfree_skb_irq or dev_kfree_skb_any in hard irq
context.  netpoll_neigh_reply leaks every skb it receives.  Reception
of packets does not work successfully on stacked devices (aka bonding,
team, bridge, and vlans).

Given that the netpoll packet receive code is buggy, there are no
out of tree users that will be merged soon, and the code has
not been used for in tree for a decade let's just remove it.

Reverting this commit can server as a starting point for anyone
who wants to resurrect netpoll packet reception support.

Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17 15:48:12 -04:00
Jan Luebbe c7966b525f net: fix macvtap type name in Kconfig
The netlink kind (and iproute2 type option) is actually called
'macvtap', not 'macvlan'.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13 15:48:31 -05:00
Michael Dalton 8cabd6a06c virtio-net: fix build error when CONFIG_AVERAGE is not enabled
Commit ab7db91705 ("virtio-net: auto-tune mergeable rx buffer size for
improved performance") introduced a virtio-net dependency on EWMA.
The inclusion of EWMA is controlled by CONFIG_AVERAGE. Fix build error
when CONFIG_AVERAGE is not enabled by adding select AVERAGE to
virtio-net's Kconfig entry.

Build failure reported using config make ARCH=s390 defconfig.

Signed-off-by: Michael Dalton <mwdalton@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 18:58:38 -08:00
Daniel Borkmann e4fc408e0e packet: nlmon: virtual netlink monitoring device for packet sockets
Currently, there is no good possibility to debug netlink traffic that
is being exchanged between kernel and user space. Therefore, this patch
implements a netlink virtual device, so that netlink messages will be
made visible to PF_PACKET sockets. Once there was an approach with a
similar idea [1], but it got forgotten somehow.

I think it makes most sense to accept the "overhead" of an extra netlink
net device over implementing the same functionality from PF_PACKET
sockets once again into netlink sockets. We have BPF filters that can
already be easily applied which even have netlink extensions, we have
RX_RING zero-copy between kernel- and user space that can be reused,
and much more features. So instead of re-implementing all of this, we
simply pass the skb to a given PF_PACKET socket for further analysis.

Another nice benefit that comes from that is that no code needs to be
changed in user space packet analyzers (maybe adding a dissector, but
not more), thus out of the box, we can already capture pcap files of
netlink traffic to debug/troubleshoot netlink problems.

Also thanks goes to Thomas Graf, Flavio Leitner, Jesper Dangaard Brouer.

 [1] http://marc.info/?l=linux-netdev&m=113813401516110

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 16:39:05 -07:00
Ben Hutchings a1606c7dc6 net: Move MII out from under NET_CORE and hide it
All drivers that select MII also need to select NET_CORE because MII
depends on it.  This is a bit ridiculous because NET_CORE is just a
menu option that doesn't enable any code by itself.

There is also no need for it to be a visible option, since its users
all select it.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 22:22:56 -07:00
Pravin B Shelar e817104525 VXLAN: Fix vxlan stats handling.
Fixes bug in VXLAN code where is iptunnel_xmit() called with NULL
dev->tstats.
This bug was introduced in commit 6aed0c8bf7 (tunnel: use
iptunnel_xmit() again).

Following patch fixes bug by setting dev->tstats. It uses ip_tunnel
module code to share stats function.

CC: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:27:18 -04:00
Linus Torvalds 1cef9350cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li
    Wei.

 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet.

 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from
    Alexander Duyck.

 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix
    from Eric Dumazet.

 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the
    amount of TCP option space was not taken into account properly in
    this code path.  Fix from yuchung Cheng.

 6) MLX4 driver allocates device queues with the wrong size, from Kleber
    Sacilotto.

 7) sock_diag can access past the end of the sock_diag_handlers[] array,
    from Mathias Krause.

 8) vlan_set_encap_proto() makes incorrect assumptions about where
    skb->data points, rework the logic so that it works regardless of
    where skb->data happens to be.  From Jesse Gross.

 9) Fix gianfar build failure with NET_POLL enabled, from Paul
    Gortmaker.

10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from
   Pravin B Shelar.

11) bgmac driver does:

        int i;

        for (i = 0; ...; ...) {
                ...
                for (i = 0; ...; ...) {

    effectively corrupting the outer loop index, use a seperate
    variable for the inner loops.  From Rafał Miłecki.

12) Fix suspend bugs in smsc95xx driver, from Ming Lei.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND
  usbnet: smsc95xx: fix broken runtime suspend
  usbnet: smsc95xx: fix suspend failure
  bgmac: fix indexing of 2nd level loops
  b43: Fix lockdep splat on module unload
  Revert "ip_gre: propogate target device GSO capability to the tunnel device"
  IP_GRE: Fix GRE_CSUM case.
  VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.
  IP_GRE: Fix IP-Identification.
  net/pasemi: Fix missing coding style
  vmxnet3: fix ethtool ring buffer size setting
  vmxnet3: make local function static
  bnx2x: remove dead code and make local funcs static
  gianfar: fix compile fail for NET_POLL=y due to struct packing
  vlan: adjust vlan_set_encap_proto() for its callers
  sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg
  sock_diag: Fix out-of-bounds access to sock_diag_handlers[]
  vxlan: remove depends on CONFIG_EXPERIMENTAL
  mlx4_en: fix allocation of CPU affinity reverse-map
  mlx4_en: fix allocation of device tx_cq
  ...
2013-02-26 11:44:11 -08:00
Kees Cook c9b20a5eff vxlan: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-23 13:51:54 -05:00
Linus Torvalds 7ed214ac20 Char/Misc driver patches for 3.9-rc1
Here's the big char/misc driver patches for 3.9-rc1.
 
 Nothing major here, just lots of different driver updates (mei, hyperv, ipack,
 extcon, vmci, etc.).
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZJgACgkQMUfUDdst+ymhZgCgo2dn37r9uMCwgTSpxSq92Je5
 x8kAnRF1UnD6ZvySRIlLUBV5LW1YgFnK
 =i5HH
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...
2013-02-21 13:57:13 -08:00
Jon Mason 548c237c0a net: Add support for NTB virtual ethernet device
A virtual ethernet device that uses the NTB transport API to
send/receive data.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:11:14 -08:00
Kees Cook bd085b9385 drivers/net: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: "David S. Miller" <davem@davemloft.net>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Mike Sterling <Mike.Sterling@microsoft.com>
CC: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
2013-01-11 11:38:07 -08:00
David S. Miller aaba1f58a7 vxlan: Depend on CONFIG_INET
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02 14:37:31 -04:00
stephen hemminger d342894c5d vxlan: virtual extensible lan
This is an implementation of Virtual eXtensible Local Area Network
as described in draft RFC:
  http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-02

The driver integrates a Virtual Tunnel Endpoint (VTEP) functionality
that learns MAC to IP address mapping.

This implementation has not been tested only against the Linux
userspace implementation using TAP, not against other vendor's
equipment.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01 18:39:45 -04:00
alex.bluesman.smirnov@gmail.com 0739d643b8 drivers/ieee802154: move ieee802154 drivers to net folder
The IEEE 802.15.4 standard represents a networking protocol. I don't
exactly know why drivers for this protocol are stored into the root
'driver' folder, but better will be to store them with other
networking stuff. Currently there are only 3 drivers available for
IEEE 802.15.4 stack, so lets do it now with the smallest overhead.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30 13:23:56 -04:00
Paul Gortmaker ee446fd5e6 tokenring: delete all remaining driver support
This represents the mass deletion of the of the tokenring support.

It gets rid of:
  - the net/tr.c which the drivers depended on
  - the drivers/net component
  - the Kbuild infrastructure around it
  - any tokenring related CONFIG_ settings in any defconfigs
  - the tokenring headers in the include/linux dir
  - the firmware associated with the tokenring drivers.
  - any associated token ring documentation.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-05-15 20:23:16 -04:00
Alan Cox 9f486619f4 dummy: documentation is stale
dummy0/1/2 names are always used and there are options to set multiple
dummy devices. Remove the obsolete text

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42865
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 13:43:58 -04:00
Linus Torvalds 12e5550892 Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (466 commits)
  net/hyperv: Add support for jumbo frame up to 64KB
  net/hyperv: Add NETVSP protocol version negotiation
  net/hyperv: Remove unnecessary kmap_atomic in netvsc driver
  staging/rtl8192e: Register against lib80211
  staging/rtl8192e: Convert to lib80211_crypt_info
  staging/rtl8192e: Convert to lib80211_crypt_data and lib80211_crypt_ops
  staging/rtl8192e: Add lib80211.h to rtllib.h
  staging/mei: add watchdog device registration wrappers
  drm/omap: GEM, deal with cache
  staging: vt6656: int.c, int.h: Change return of function to void
  staging: usbip: removed unused definitions from header
  staging: usbip: removed dead code from receive function
  staging:iio: Drop {mark,unmark}_in_use callbacks
  staging:iio: Drop buffer mark_param_change callback
  staging:iio: Drop the unused buffer enable() and is_enabled() callbacks
  staging:iio: Drop buffer busy flag
  staging:iio: Make sure a device is only opened once at a time
  staging:iio: Disallow modifying buffer size when buffer is enabled
  staging:iio: Disallow changing scan elements in all buffered modes
  staging:iio: Use iio_buffer_enabled instead of open coding it
  ...

Fix up conflict in drivers/staging/iio/adc/ad799x_core.c (removal of
module_init due to using module_i2c_driver() helper, next to removal of
MODULE_ALIAS due to using MODULE_DEVICE_TABLE instead).
2012-01-09 12:18:17 -08:00
Haiyang Zhang 95fa0405c5 staging: hv: move hv_netvsc out of staging area
hv_netvsc has been reviewed on netdev mailing list on 6/09/2011.
All recommended changes have been made. We are requesting to move
it out of staging area.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: KY Srinivasan <kys@microsoft.com>
Signed-off-by: Mike Sterling <Mike.Sterling@microsoft.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29 16:12:36 +09:00