Commit Graph

8603 Commits

Author SHA1 Message Date
Linus Torvalds dfe2c6dcc8 Merge branch 'akpm' (patches from Andrew Morton)
Merge second patch-bomb from Andrew Morton:
 - a few hotfixes
 - drivers/dma updates
 - MAINTAINERS updates
 - Quite a lot of lib/ updates
 - checkpatch updates
 - binfmt updates
 - autofs4
 - drivers/rtc/
 - various small tweaks to less used filesystems
 - ipc/ updates
 - kernel/watchdog.c changes

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
  mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
  kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h>
  ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[]
  frv: remove unused declarations of __start___ex_table and __stop___ex_table
  kvm: ensure hard lockup detection is disabled by default
  kernel/watchdog.c: control hard lockup detection default
  staging: rtl8192u: use %*pEn to escape buffer
  staging: rtl8192e: use %*pEn to escape buffer
  staging: wlan-ng: use %*pEhp to print SN
  lib80211: remove unused print_ssid()
  wireless: hostap: proc: print properly escaped SSID
  wireless: ipw2x00: print SSID via %*pE
  wireless: libertas: print esaped string via %*pE
  lib/vsprintf: add %*pE[achnops] format specifier
  lib / string_helpers: introduce string_escape_mem()
  lib / string_helpers: refactoring the test suite
  lib / string_helpers: move documentation to c-file
  include/linux: remove strict_strto* definitions
  arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable
  fs: check bh blocknr earlier when searching lru
  ...
2014-10-14 03:54:50 +02:00
Linus Torvalds df133e8fa8 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
 "This tree includes the following changes:

   - fix memory hotplug
   - fix hibernation bootup memory layout assumptions
   - fix hyperv numa guest kernel messages
   - remove dead code
   - update documentation"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Update memory map description to list hypervisor-reserved area
  x86/mm, hibernate: Do not assume the first e820 area to be RAM
  x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data()
  x86/mm/hotplug: Modify PGD entry when removing memory
  x86/mm/hotplug: Pass sync_global_pgds() a correct argument in remove_pagetable()
  x86: Remove set_pmd_pfn
2014-10-14 02:22:41 +02:00
Peter Feiner 64e455079e mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set.  If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.

Here's a simple code snippet to demonstrate the bug:

  char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
                 MAP_ANONYMOUS | MAP_SHARED, -1, 0);
  system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
  assert(*m == '\0');     /* new PTE allows write access */
  assert(!soft_dirty(x));
  *m = 'x';               /* should dirty the page */
  assert(soft_dirty(x));  /* fails */

With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared.  Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.

As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect.  An analogous bug was fixed in mmap by
commit c9d0bf2414 ("mm: uncached vma support with writenotify").

Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:28 +02:00
Marek Szyprowski de9e14eebf drivers: dma-contiguous: add initialization from device tree
Add a function to create CMA region from previously reserved memory and
add support for handling 'shared-dma-pool' reserved-memory device tree
nodes.

Based on previous code provided by Josh Cartwright <joshc@codeaurora.org>

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:12 +02:00
Weijie Yang 68faed630f mm/cma: fix cma bitmap aligned mask computing
The current cma bitmap aligned mask computation is incorrect.  It could
cause an unexpected alignment when using cma_alloc() if the wanted align
order is larger than cma->order_per_bit.

Take kvm for example (PAGE_SHIFT = 12), kvm_cma->order_per_bit is set to
6.  When kvm_alloc_rma() tries to alloc kvm_rma_pages, it will use 15 as
the expected align value.  After using the current implementation however,
we get 0 as cma bitmap aligned mask other than 511.

This patch fixes the cma bitmap aligned mask calculation.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>	[3.17]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:12 +02:00
Joonsoo Kim 85c9f4b04a mm/slab: fix unaligned access on sparc64
Commit bf0dea23a9 ("mm/slab: use percpu allocator for cpu cache")
changed the allocation method for cpu cache array from slab allocator to
percpu allocator.  Alignment should be provided for aligned memory in
percpu allocator case, but, that commit mistakenly set this alignment to
0.  So, percpu allocator returns unaligned memory address.  It doesn't
cause any problem on x86 which permits unaligned access, but, it causes
the problem on sparc64 which needs strong guarantee of alignment.

Following bug report is reported from David Miller.

  I'm getting tons of the following on sparc64:

  [603965.383447] Kernel unaligned access at TPC[546b58] free_block+0x98/0x1a0
  [603965.396987] Kernel unaligned access at TPC[546b60] free_block+0xa0/0x1a0
  ...
  [603970.554394] log_unaligned: 333 callbacks suppressed
  ...

This patch provides a proper alignment parameter when allocating cpu
cache to fix this unaligned memory access problem on sparc64.

Reported-by: David Miller <davem@davemloft.net>
Tested-by: David Miller <davem@davemloft.net>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:12 +02:00
Linus Torvalds d6dd50e07c Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - changes related to No-CBs CPUs and NO_HZ_FULL

   - RCU-tasks implementation

   - torture-test updates

   - miscellaneous fixes

   - locktorture updates

   - RCU documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  workqueue: Use cond_resched_rcu_qs macro
  workqueue: Add quiescent state between work items
  locktorture: Cleanup header usage
  locktorture: Cannot hold read and write lock
  locktorture: Fix __acquire annotation for spinlock irq
  locktorture: Support rwlocks
  rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
  locktorture: Document boot/module parameters
  rcutorture: Rename rcutorture_runnable parameter
  locktorture: Add test scenario for rwsem_lock
  locktorture: Add test scenario for mutex_lock
  locktorture: Make torture scripting account for new _runnable name
  locktorture: Introduce torture context
  locktorture: Support rwsems
  locktorture: Add infrastructure for torturing read locks
  torture: Address race in module cleanup
  locktorture: Make statistics generic
  locktorture: Teach about lock debugging
  locktorture: Support mutexes
  locktorture: Add documentation
  ...
2014-10-13 15:44:12 +02:00
Linus Torvalds 77c688ac87 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The big thing in this pile is Eric's unmount-on-rmdir series; we
  finally have everything we need for that.  The final piece of prereqs
  is delayed mntput() - now filesystem shutdown always happens on
  shallow stack.

  Other than that, we have several new primitives for iov_iter (Matt
  Wilcox, culled from his XIP-related series) pushing the conversion to
  ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
  cleanups and fixes (including the external name refcounting, which
  gives consistent behaviour of d_move() wrt procfs symlinks for long
  and short names alike) and assorted cleanups and fixes all over the
  place.

  This is just the first pile; there's a lot of stuff from various
  people that ought to go in this window.  Starting with
  unionmount/overlayfs mess...  ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
  fs/file_table.c: Update alloc_file() comment
  vfs: Deduplicate code shared by xattr system calls operating on paths
  reiserfs: remove pointless forward declaration of struct nameidata
  don't need that forward declaration of struct nameidata in dcache.h anymore
  take dname_external() into fs/dcache.c
  let path_init() failures treated the same way as subsequent link_path_walk()
  fix misuses of f_count() in ppp and netlink
  ncpfs: use list_for_each_entry() for d_subdirs walk
  vfs: move getname() from callers to do_mount()
  gfs2_atomic_open(): skip lookups on hashed dentry
  [infiniband] remove pointless assignments
  gadgetfs: saner API for gadgetfs_create_file()
  f_fs: saner API for ffs_sb_create_file()
  jfs: don't hash direct inode
  [s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
  ecryptfs: ->f_op is never NULL
  android: ->f_op is never NULL
  nouveau: __iomem misannotations
  missing annotation in fs/file.c
  fs: namespace: suppress 'may be used uninitialized' warnings
  ...
2014-10-13 11:28:42 +02:00
Linus Torvalds ce254b34da Fixup for 3.18: use PATCHv2 of "mm: Support compiling out madvise and fadvise"
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlQ4QE8ACgkQGJuZRtD+evvV7wCgta2s0uREeOpfj5ulXhDCRk1u
 MpYAnRR8yscDvZa12v7oTtxMOCqbJPjh
 =NIl9
 -----END PGP SIGNATURE-----

Merge tag 'tiny/no-advice-fixup-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux

Pull tinification fix from Josh "Paper Bag" Triplett:
 "Fixup to use PATCHv2 of 'mm: Support compiling out madvise and
  fadvise'"

* tag 'tiny/no-advice-fixup-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux:
  mm: Support fadvise without CONFIG_MMU
2014-10-12 09:21:57 -04:00
Josh Triplett 887e7019e3 mm: Support fadvise without CONFIG_MMU
Commit d3ac21cacc ("mm: Support compiling
out madvise and fadvise") incorrectly made fadvise conditional on
CONFIG_MMU.  (The merged branch unintentionally incorporated v1 of the
patch rather than the fixed v2.)  Apply the delta from v1 to v2, to
allow fadvise without CONFIG_MMU.

Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2014-10-10 13:12:28 -07:00
Linus Torvalds c798360cd1 Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "A lot of activities on percpu front.  Notable changes are...

   - percpu allocator now can take @gfp.  If @gfp doesn't contain
     GFP_KERNEL, it tries to allocate from what's already available to
     the allocator and a work item tries to keep the reserve around
     certain level so that these atomic allocations usually succeed.

     This will replace the ad-hoc percpu memory pool used by
     blk-throttle and also be used by the planned blkcg support for
     writeback IOs.

     Please note that I noticed a bug in how @gfp is interpreted while
     preparing this pull request and applied the fix 6ae833c7fe
     ("percpu: fix how @gfp is interpreted by the percpu allocator")
     just now.

   - percpu_ref now uses longs for percpu and global counters instead of
     ints.  It leads to more sparse packing of the percpu counters on
     64bit machines but the overhead should be negligible and this
     allows using percpu_ref for refcnting pages and in-memory objects
     directly.

   - The switching between percpu and single counter modes of a
     percpu_ref is made independent of putting the base ref and a
     percpu_ref can now optionally be initialized in single or killed
     mode.  This allows avoiding percpu shutdown latency for cases where
     the refcounted objects may be synchronously created and destroyed
     in rapid succession with only a fraction of them reaching fully
     operational status (SCSI probing does this when combined with
     blk-mq support).  It's also planned to be used to implement forced
     single mode to detect underflow more timely for debugging.

  There's a separate branch percpu/for-3.18-consistent-ops which cleans
  up the duplicate percpu accessors.  That branch causes a number of
  conflicts with s390 and other trees.  I'll send a separate pull
  request w/ resolutions once other branches are merged"

* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
  percpu: fix how @gfp is interpreted by the percpu allocator
  blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
  percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
  percpu_ref: add PERCPU_REF_INIT_* flags
  percpu_ref: decouple switching to percpu mode and reinit
  percpu_ref: decouple switching to atomic mode and killing
  percpu_ref: add PCPU_REF_DEAD
  percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
  percpu_ref: replace pcpu_ prefix with percpu_
  percpu_ref: minor code and comment updates
  percpu_ref: relocate percpu_ref_reinit()
  Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
  Revert "percpu: free percpu allocation info for uniprocessor system"
  percpu-refcount: make percpu_ref based on longs instead of ints
  percpu-refcount: improve WARN messages
  percpu: fix locking regression in the failure path of pcpu_alloc()
  percpu-refcount: add @gfp to percpu_ref_init()
  proportions: add @gfp to init functions
  percpu_counter: add @gfp to percpu_counter_init()
  percpu_counter: make percpu_counters_lock irq-safe
  ...
2014-10-10 07:26:02 -04:00
Linus Torvalds b211e9d7c8 Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "Nothing too interesting.  Just a handful of cleanup patches"

* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Revert "cgroup: remove redundant variable in cgroup_mount()"
  cgroup: remove redundant variable in cgroup_mount()
  cgroup: fix missing unlock in cgroup_release_agent()
  cgroup: remove CGRP_RELEASABLE flag
  perf/cgroup: Remove perf_put_cgroup()
  cgroup: remove redundant check in cgroup_ino()
  cpuset: simplify proc_cpuset_show()
  cgroup: simplify proc_cgroup_show()
  cgroup: use a per-cgroup work for release agent
  cgroup: remove bogus comments
  cgroup: remove redundant code in cgroup_rmdir()
  cgroup: remove some useless forward declarations
  cgroup: fix a typo in comment.
2014-10-10 07:24:40 -04:00
Chao Yu f203c3b33f zbud: avoid accessing last unused freelist
For now, there are NCHUNKS of 64 freelists in zbud_pool, the last
unbuddied[63] freelist linked with all zbud pages which have free chunks
of 63.  Calculating according to context of num_free_chunks(), our max
chunk number of unbuddied zbud page is 62, so none of zbud pages will be
added/removed in last freelist, but still we will try to find an unbuddied
zbud page in the last unused freelist, it is unneeded.

This patch redefines NCHUNKS to 63 as free chunk number in one zbud page,
hence we can decrease size of zpool and avoid accessing the last unused
freelist whenever failing to allocate zbud from freelist in zbud_alloc.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:03 -04:00
Dan Streetman 5538c56237 zsmalloc: simplify init_zspage free obj linking
Change zsmalloc init_zspage() logic to iterate through each object on each
of its pages, checking the offset to verify the object is on the current
page before linking it into the zspage.

The current zsmalloc init_zspage free object linking code has logic that
relies on there only being one page per zspage when PAGE_SIZE is a
multiple of class->size.  It calculates the number of objects for the
current page, and iterates through all of them plus one, to account for
the assumed partial object at the end of the page.  While this currently
works, the logic can be simplified to just link the object at each
successive offset until the offset is larger than PAGE_SIZE, which does
not rely on PAGE_SIZE being a multiple of class->size.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:03 -04:00
Wang Sheng-Hui 6dd9737e31 mm/zsmalloc.c: correct comment for fullness group computation
The letter 'f' in "n <= N/f" stands for fullness_threshold_frac, not
1/fullness_threshold_frac.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:03 -04:00
Minchan Kim 722cdc1723 zsmalloc: change return value unit of zs_get_total_size_bytes
zs_get_total_size_bytes returns a amount of memory zsmalloc consumed with
*byte unit* but zsmalloc operates *page unit* rather than byte unit so
let's change the API so benefit we could get is that reduce unnecessary
overhead (ie, change page unit with byte unit) in zsmalloc.

Since return type is pages, "zs_get_total_pages" is better than
"zs_get_total_size_bytes".

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <juno.choi@lge.com>
Cc: <seungho1.park@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: David Horner <ds2horner@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:02 -04:00
Minchan Kim 13de8933c9 zsmalloc: move pages_allocated to zs_pool
Currently, zram has no feature to limit memory so theoretically zram can
deplete system memory.  Users have asked for a limit several times as even
without exhaustion zram makes it hard to control memory usage of the
platform.  This patchset adds the feature.

Patch 1 makes zs_get_total_size_bytes faster because it would be used
frequently in later patches for the new feature.

Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page
so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT).

Patch 3 adds new feature.  I added the feature into zram layer, not
zsmalloc because limiation is zram's requirement, not zsmalloc so any
other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary
branch of zsmalloc.  In future, if every users of zsmalloc want the
feature, then, we could move the feature from client side to zsmalloc
easily but vice versa would be painful.

Patch 4 adds news facility to report maximum memory usage of zram so that
this avoids user polling frequently via /sys/block/zram0/ mem_used_total
and ensures transient max are not missed.

This patch (of 4):

pages_allocated has counted in size_class structure and when user of
zsmalloc want to see total_size_bytes, it should gather all of count from
each size_class to report the sum.

It's not bad if user don't see the value often but if user start to see
the value frequently, it would be not a good deal for performance pov.

This patch moves the count from size_class to zs_pool so it could reduce
memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]).

Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <juno.choi@lge.com>
Cc: <seungho1.park@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Reviewed-by: David Horner <ds2horner@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:02 -04:00
Christoph Lameter 7cc36bbddd vmstat: on-demand vmstat workers V8
vmstat workers are used for folding counter differentials into the zone,
per node and global counters at certain time intervals.  They currently
run at defined intervals on all processors which will cause some holdoff
for processors that need minimal intrusion by the OS.

The current vmstat_update mechanism depends on a deferrable timer firing
every other second by default which registers a work queue item that runs
on the local CPU, with the result that we have 1 interrupt and one
additional schedulable task on each CPU every 2 seconds If a workload
indeed causes VM activity or multiple tasks are running on a CPU, then
there are probably bigger issues to deal with.

However, some workloads dedicate a CPU for a single CPU bound task.  This
is done in high performance computing, in high frequency financial
applications, in networking (Intel DPDK, EZchip NPS) and with the advent
of systems with more and more CPUs over time, this may become more and
more common to do since when one has enough CPUs one cares less about
efficiently sharing a CPU with other tasks and more about efficiently
monopolizing a CPU per task.

The difference of having this timer firing and workqueue kernel thread
scheduled per second can be enormous.  An artificial test measuring the
worst case time to do a simple "i++" in an endless loop on a bare metal
system and under Linux on an isolated CPU with dynticks and with and
without this patch, have Linux match the bare metal performance (~700
cycles) with this patch and loose by couple of orders of magnitude (~200k
cycles) without it[*].  The loss occurs for something that just calculates
statistics.  For networking applications, for example, this could be the
difference between dropping packets or sustaining line rate.

Statistics are important and useful, but it would be great if there would
be a way to not cause statistics gathering produce a huge performance
difference.  This patche does just that.

This patch creates a vmstat shepherd worker that monitors the per cpu
differentials on all processors.  If there are differentials on a
processor then a vmstat worker local to the processors with the
differentials is created.  That worker will then start folding the diffs
in regular intervals.  Should the worker find that there is no work to be
done then it will make the shepherd worker monitor the differentials
again.

With this patch it is possible then to have periods longer than
2 seconds without any OS event on a "cpu" (hardware thread).

The patch shows a very minor increased in system performance.

hackbench -s 512 -l 2000 -g 15 -f 25 -P

Results before the patch:

Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.992
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.971
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 5.063

Hackbench after the patch:

Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.973
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.990
Running in process mode with 15 groups using 50 file descriptors each (== 750 tasks)
Each sender will pass 2000 messages of 512 bytes
Time: 4.993

[fengguang.wu@intel.com: cpu_stat_off can be static]
Signed-off-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Max Krasnyansky <maxk@qti.qualcomm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:02 -04:00
Mel Gorman 2c0346a36c mm: mempolicy: skip inaccessible VMAs when setting MPOL_MF_LAZY
PROT_NUMA VMAs are skipped to avoid problems distinguishing between
present, prot_none and special entries.  MPOL_MF_LAZY is not visible from
userspace since commit a720094ded ("mm: mempolicy: Hide MPOL_NOOP and
MPOL_MF_LAZY from userspace for now") but it should still skip VMAs the
same way task_numa_work does.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:02 -04:00
Konstantin Khlebnikov 09316c09dd mm/balloon_compaction: add vmstat counters and kpageflags bit
Always mark pages with PageBalloon even if balloon compaction is disabled
and expose this mark in /proc/kpageflags as KPF_BALLOON.

Also this patch adds three counters into /proc/vmstat: "balloon_inflate",
"balloon_deflate" and "balloon_migrate".  They accumulate balloon
activity.  Current size of balloon is (balloon_inflate - balloon_deflate)
pages.

All generic balloon code now gathered under option CONFIG_MEMORY_BALLOON.
It should be selected by ballooning driver which wants use this feature.
Currently virtio-balloon is the only user.

Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:01 -04:00
Konstantin Khlebnikov 9d1ba80564 mm/balloon_compaction: remove balloon mapping and flag AS_BALLOON_MAP
Now ballooned pages are detected using PageBalloon().  Fake mapping is no
longer required.  This patch links ballooned pages to balloon device using
field page->private instead of page->mapping.  Also this patch embeds
balloon_dev_info directly into struct virtio_balloon.

Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:01 -04:00
Konstantin Khlebnikov d6d86c0a7f mm/balloon_compaction: redesign ballooned pages management
Sasha Levin reported KASAN splash inside isolate_migratepages_range().
Problem is in the function __is_movable_balloon_page() which tests
AS_BALLOON_MAP in page->mapping->flags.  This function has no protection
against anonymous pages.  As result it tried to check address space flags
inside struct anon_vma.

Further investigation shows more problems in current implementation:

* Special branch in __unmap_and_move() never works:
  balloon_page_movable() checks page flags and page_count.  In
  __unmap_and_move() page is locked, reference counter is elevated, thus
  balloon_page_movable() always fails.  As a result execution goes to the
  normal migration path.  virtballoon_migratepage() returns
  MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS,
  move_to_new_page() thinks this is an error code and assigns
  newpage->mapping to NULL.  Newly migrated page lose connectivity with
  balloon an all ability for further migration.

* lru_lock erroneously required in isolate_migratepages_range() for
  isolation ballooned page.  This function releases lru_lock periodically,
  this makes migration mostly impossible for some pages.

* balloon_page_dequeue have a tight race with balloon_page_isolate:
  balloon_page_isolate could be executed in parallel with dequeue between
  picking page from list and locking page_lock.  Race is rare because they
  use trylock_page() for locking.

This patch fixes all of them.

Instead of fake mapping with special flag this patch uses special state of
page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256.  Buddy allocator uses
PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose.  Storing mark
directly in struct page makes everything safer and easier.

PagePrivate is used to mark pages present in page list (i.e.  not
isolated, like PageLRU for normal pages).  It replaces special rules for
reference counter and makes balloon migration similar to migration of
normal pages.  This flag is protected by page_lock together with link to
the balloon device.

Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: <stable@vger.kernel.org>	[3.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:01 -04:00
Steve Capper 2667f50e8b mm: introduce a general RCU get_user_pages_fast()
This series implements general forms of get_user_pages_fast and
__get_user_pages_fast in core code and activates them for arm and arm64.

These are required for Transparent HugePages to function correctly, as a
futex on a THP tail will otherwise result in an infinite loop (due to the
core implementation of __get_user_pages_fast always returning 0).

Unfortunately, a futex on THP tail can be quite common for certain
workloads; thus THP is unreliable without a __get_user_pages_fast
implementation.

This series may also be beneficial for direct-IO heavy workloads and
certain KVM workloads.

This patch (of 6):

get_user_pages_fast() attempts to pin user pages by walking the page
tables directly and avoids taking locks.  Thus the walker needs to be
protected from page table pages being freed from under it, and needs to
block any THP splits.

One way to achieve this is to have the walker disable interrupts, and rely
on IPIs from the TLB flushing code blocking before the page table pages
are freed.

On some platforms we have hardware broadcast of TLB invalidations, thus
the TLB flushing code doesn't necessarily need to broadcast IPIs; and
spuriously broadcasting IPIs can hurt system performance if done too
often.

This problem has been solved on PowerPC and Sparc by batching up page
table pages belonging to more than one mm_user, then scheduling an
rcu_sched callback to free the pages.  This RCU page table free logic has
been promoted to core code and is activated when one enables
HAVE_RCU_TABLE_FREE.  Unfortunately, these architectures implement their
own get_user_pages_fast routines.

The RCU page table free logic coupled with an IPI broadcast on THP split
(which is a rare event), allows one to protect a page table walker by
merely disabling the interrupts during the walk.

This patch provides a general RCU implementation of get_user_pages_fast
that can be used by architectures that perform hardware broadcast of TLB
invalidations.

It is based heavily on the PowerPC implementation by Nick Piggin.

[akpm@linux-foundation.org: various comment fixes]
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:00 -04:00
Paul McQuade baa2ef8398 mm/dmapool.c: fixed a brace coding style issue
Remove 3 brace coding style for any arm of this statement

Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:00 -04:00
Paul McQuade 25acde3173 mm: ksm use pr_err instead of printk
WARNING: Prefer: pr_err(...  to printk(KERN_ERR ...

[akpm@linux-foundation.org: remove KERN_ERR]
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:00 -04:00
Paul McQuade d85fbee89f mm/bootmem.c: use include/linux/ headers
Replace asm. headers with linux/headers:

<linux/bug.h>
<linux/io.h>

Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:00 -04:00
Paul McQuade 99dadfdde0 mm/filemap.c: remove trailing whitespace
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:00 -04:00
Paul McQuade 2581d20237 mm/mremap.c: use linux headers
"WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>"

Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:00 -04:00
Vladimir Davydov cf2b8fbf1d memcg: zap memcg_can_account_kmem
memcg_can_account_kmem() returns true iff

    !mem_cgroup_disabled() && !mem_cgroup_is_root(memcg) &&
                                   memcg_kmem_is_active(memcg);

To begin with the !mem_cgroup_is_root(memcg) check is useless, because one
can't enable kmem accounting for the root cgroup (mem_cgroup_write()
returns EINVAL on an attempt to set the limit on the root cgroup).

Furthermore, the !mem_cgroup_disabled() check also seems to be redundant.
The point is memcg_can_account_kmem() is called from three places:
mem_cgroup_salbinfo_read(), __memcg_kmem_get_cache(), and
__memcg_kmem_newpage_charge().  The latter two functions are only invoked
if memcg_kmem_enabled() returns true, which implies that the memory cgroup
subsystem is enabled.  And mem_cgroup_slabinfo_read() shows the output of
memory.kmem.slabinfo, which won't exist if the memory cgroup is completely
disabled.

So let's substitute all the calls to memcg_can_account_kmem() with plain
memcg_kmem_is_active(), and kill the former.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:26:00 -04:00
Johannes Weiner b70a2a21dc mm: memcontrol: fix transparent huge page allocations under pressure
In a memcg with even just moderate cache pressure, success rates for
transparent huge page allocations drop to zero, wasting a lot of effort
that the allocator puts into assembling these pages.

The reason for this is that the memcg reclaim code was never designed for
higher-order charges.  It reclaims in small batches until there is room
for at least one page.  Huge page charges only succeed when these batches
add up over a series of huge faults, which is unlikely under any
significant load involving order-0 allocations in the group.

Remove that loop on the memcg side in favor of passing the actual reclaim
goal to direct reclaim, which is already set up and optimized to meet
higher-order goals efficiently.

This brings memcg's THP policy in line with the system policy: if the
allocator painstakingly assembles a hugepage, memcg will at least make an
honest effort to charge it.  As a result, transparent hugepage allocation
rates amid cache activity are drastically improved:

                                      vanilla                 patched
pgalloc                 4717530.80 (  +0.00%)   4451376.40 (  -5.64%)
pgfault                  491370.60 (  +0.00%)    225477.40 ( -54.11%)
pgmajfault                    2.00 (  +0.00%)         1.80 (  -6.67%)
thp_fault_alloc               0.00 (  +0.00%)       531.60 (+100.00%)
thp_fault_fallback          749.00 (  +0.00%)       217.40 ( -70.88%)

[ Note: this may in turn increase memory consumption from internal
  fragmentation, which is an inherent risk of transparent hugepages.
  Some setups may have to adjust the memcg limits accordingly to
  accomodate this - or, if the machine is already packed to capacity,
  disable the transparent huge page feature. ]

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave@sr71.net>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Johannes Weiner 3fbe724424 mm: memcontrol: simplify detecting when the memory+swap limit is hit
When attempting to charge pages, we first charge the memory counter and
then the memory+swap counter.  If one of the counters is at its limit, we
enter reclaim, but if it's the memory+swap counter, reclaim shouldn't swap
because that wouldn't change the situation.  However, if the counters have
the same limits, we never get to the memory+swap limit.  To know whether
reclaim should swap or not, there is a state flag that indicates whether
the limits are equal and whether hitting the memory limit implies hitting
the memory+swap limit.

Just try the memory+swap counter first.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave@sr71.net>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Michal Hocko aabfb57296 mm: memcontrol: do not kill uncharge batching in free_pages_and_swap_cache
free_pages_and_swap_cache limits release_pages to PAGEVEC_SIZE chunks.
This is not a big deal for the normal release path but it completely kills
memcg uncharge batching which reduces res_counter spin_lock contention.
Dave has noticed this with his page fault scalability test case on a large
machine when the lock was basically dominating on all CPUs:

    80.18%    80.18%  [kernel]               [k] _raw_spin_lock
                  |
                  --- _raw_spin_lock
                     |
                     |--66.59%-- res_counter_uncharge_until
                     |          res_counter_uncharge
                     |          uncharge_batch
                     |          uncharge_list
                     |          mem_cgroup_uncharge_list
                     |          release_pages
                     |          free_pages_and_swap_cache
                     |          tlb_flush_mmu_free
                     |          |
                     |          |--90.12%-- unmap_single_vma
                     |          |          unmap_vmas
                     |          |          unmap_region
                     |          |          do_munmap
                     |          |          vm_munmap
                     |          |          sys_munmap
                     |          |          system_call_fastpath
                     |          |          __GI___munmap
                     |          |
                     |           --9.88%-- tlb_flush_mmu
                     |                     tlb_finish_mmu
                     |                     unmap_region
                     |                     do_munmap
                     |                     vm_munmap
                     |                     sys_munmap
                     |                     system_call_fastpath
                     |                     __GI___munmap

In his case the load was running in the root memcg and that part has been
handled by reverting 05b8430123 ("mm: memcontrol: use root_mem_cgroup
res_counter") because this is a clear regression, but the problem remains
inside dedicated memcgs.

There is no reason to limit release_pages to PAGEVEC_SIZE batches other
than lru_lock held times.  This logic, however, can be moved inside the
function.  mem_cgroup_uncharge_list and free_hot_cold_page_list do not
hold any lock for the whole pages_to_free list so it is safe to call them
in a single run.

The release_pages() code was previously breaking the lru_lock each
PAGEVEC_SIZE pages (ie, 14 pages).  However this code has no usage of
pagevecs so switch to breaking the lock at least every SWAP_CLUSTER_MAX
(32) pages.  This means that the lock acquisition frequency is
approximately halved and the max hold times are approximately doubled.

The now unneeded batching is removed from free_pages_and_swap_cache().

Also update the grossly out-of-date release_pages documentation.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Dave Hansen <dave@sr71.net>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Sebastian Andrzej Siewior 01c2965f07 mm: dmapool: add/remove sysfs file outside of the pool lock lock
cat /sys/.../pools followed by removal the device leads to:

|======================================================
|[ INFO: possible circular locking dependency detected ]
|3.17.0-rc4+ #1498 Not tainted
|-------------------------------------------------------
|rmmod/2505 is trying to acquire lock:
| (s_active#28){++++.+}, at: [<c017f754>] kernfs_remove_by_name_ns+0x3c/0x88
|
|but task is already holding lock:
| (pools_lock){+.+.+.}, at: [<c011494c>] dma_pool_destroy+0x18/0x17c
|
|which lock already depends on the new lock.
|the existing dependency chain (in reverse order) is:
|
|-> #1 (pools_lock){+.+.+.}:
|   [<c0114ae8>] show_pools+0x30/0xf8
|   [<c0313210>] dev_attr_show+0x1c/0x48
|   [<c0180e84>] sysfs_kf_seq_show+0x88/0x10c
|   [<c017f960>] kernfs_seq_show+0x24/0x28
|   [<c013efc4>] seq_read+0x1b8/0x480
|   [<c011e820>] vfs_read+0x8c/0x148
|   [<c011ea10>] SyS_read+0x40/0x8c
|   [<c000e960>] ret_fast_syscall+0x0/0x48
|
|-> #0 (s_active#28){++++.+}:
|   [<c017e9ac>] __kernfs_remove+0x258/0x2ec
|   [<c017f754>] kernfs_remove_by_name_ns+0x3c/0x88
|   [<c0114a7c>] dma_pool_destroy+0x148/0x17c
|   [<c03ad288>] hcd_buffer_destroy+0x20/0x34
|   [<c03a4780>] usb_remove_hcd+0x110/0x1a4

The problem is the lock order of pools_lock and kernfs_mutex in
dma_pool_destroy() vs show_pools() call path.

This patch breaks out the creation of the sysfs file outside of the
pools_lock mutex.  The newly added pools_reg_lock ensures that there is no
race of create vs destroy code path in terms whether or not the sysfs file
has to be deleted (and was it deleted before we try to create a new one)
and what to do if device_create_file() failed.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Vladimir Davydov 6f817f4cda memcg: move memcg_update_cache_size() to slab_common.c
`While growing per memcg caches arrays, we jump between memcontrol.c and
slab_common.c in a weird way:

  memcg_alloc_cache_id - memcontrol.c
    memcg_update_all_caches - slab_common.c
      memcg_update_cache_size - memcontrol.c

There's absolutely no reason why memcg_update_cache_size can't live on the
slab's side though.  So let's move it there and settle it comfortably amid
per-memcg cache allocation functions.

Besides, this patch cleans this function up a bit, removing all the
useless comments from it, and renames it to memcg_update_cache_params to
conform to memcg_alloc/free_cache_params, which we already have in
slab_common.c.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Vladimir Davydov f3bb3043a0 memcg: don't call memcg_update_all_caches if new cache id fits
memcg_update_all_caches grows arrays of per-memcg caches, so we only need
to call it when memcg_limited_groups_array_size is increased.  However,
currently we invoke it each time a new kmem-active memory cgroup is
created.  Then it just iterates over all slab_caches and does nothing
(memcg_update_cache_size returns immediately).

This patch fixes this insanity.  In the meantime it moves the code dealing
with id allocations to separate functions, memcg_alloc_cache_id and
memcg_free_cache_id.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Vladimir Davydov 33a690c45b memcg: move memcg_{alloc,free}_cache_params to slab_common.c
The only reason why they live in memcontrol.c is that we get/put css
reference to the owner memory cgroup in them.  However, we can do that in
memcg_{un,}register_cache.  OTOH, there are several reasons to move them
to slab_common.c.

First, I think that the less public interface functions we have in
memcontrol.h the better.  Since the functions I move don't depend on
memcontrol, I think it's worth making them private to slab, especially
taking into account that the arrays are defined on the slab's side too.

Second, the way how per-memcg arrays are updated looks rather awkward: it
proceeds from memcontrol.c (__memcg_activate_kmem) to slab_common.c
(memcg_update_all_caches) and back to memcontrol.c again
(memcg_update_array_size).  In the following patches I move the function
relocating the arrays (memcg_update_array_size) to slab_common.c and
therefore get rid this circular call path.  I think we should have the
cache allocation stuff in the same place where we have relocation, because
it's easier to follow the code then.  So I move arrays alloc/free
functions to slab_common.c too.

The third point isn't obvious.  I'm going to make the list_lru structure
per-memcg to allow targeted kmem reclaim.  That means we will have
per-memcg arrays in list_lrus too.  It turns out that it's much easier to
update these arrays in list_lru.c rather than in memcontrol.c, because all
the stuff we need is defined there.  This patch makes memcg caches arrays
allocation path conform that of the upcoming list_lru.

So let's move these functions to slab_common.c and make them static.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Andrew Morton 7a82ca0d64 mm/debug.c: use pr_emerg()
- s/KERN_ALERT/pr_emerg/: we're going BUG so let's maximize the changes
  of getting the message out.

- convert debug.c to pr_foo()

Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:59 -04:00
Sasha Levin 96dad67ff2 mm: use VM_BUG_ON_MM where possible
Dump the contents of the relevant struct_mm when we hit the bug condition.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:58 -04:00
Sasha Levin 31c9afa6db mm: introduce VM_BUG_ON_MM
Very similar to VM_BUG_ON_PAGE and VM_BUG_ON_VMA, dump struct_mm when the
bug is hit.

[akpm@linux-foundation.org: coding-style fixes]
[mhocko@suse.cz: fix build]
[mhocko@suse.cz: fix build some more]
[akpm@linux-foundation.org: do strange things to avoid doing strange things for the comma separators]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:58 -04:00
Sasha Levin 82742a3a51 mm: move debug code out of page_alloc.c
dump_page() and dump_vma() are not specific to page_alloc.c, move them out
so page_alloc.c won't turn into the unofficial debug repository.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:58 -04:00
Mel Gorman 3193913ce6 mm: page_alloc: default node-ordering on 64-bit NUMA, zone-ordering on 32-bit
Zones are allocated by the page allocator in either node or zone order.
Node ordering is preferred in terms of locality and is applied
automatically in one of three cases:

  1. If a node has only low memory

  2. If DMA/DMA32 is a high percentage of memory

  3. If low memory on a single node is greater than 70% of the node size

Otherwise zone ordering is used to preserve low memory for devices that
require it.  Unfortunately a consequence of this is that applications
running on a machine with balanced NUMA nodes will experience different
performance characteristics depending on which node they happen to start
from.

The point of zone ordering is to protect lower zones for devices that
require DMA/DMA32 memory.  When NUMA was first introduced, this was
critical as 32-bit NUMA machines existed and exhausting low memory
triggered OOMs easily as so many allocations required low memory.  On
64-bit machines the primary concern is devices that are 32-bit only which
is less severe than the low memory exhaustion problem on 32-bit NUMA.  It
seems there are really few devices that depends on it.

AGP -- I assume this is getting more rare but even then I think the allocations
	happen early in boot time where lowmem pressure is less of a problem

DRM -- If the device is 32-bit only then there may be low pressure. I didn't
	evaluate these in detail but it looks like some of these are mobile
	graphics card. Not many NUMA laptops out there. DRM folk should know
	better though.

Some TV cards -- Much demand for 32-bit capable TV cards on NUMA machines?

B43 wireless card -- again not really a NUMA thing.

I cannot find a good reason to incur a performance penalty on all 64-bit NUMA
machines in case someone throws a brain damanged TV or graphics card in there.
This patch defaults to node-ordering on 64-bit NUMA machines. I was tempted
to make it default everywhere but I understand that some embedded arches may
be using 32-bit NUMA where I cannot predict the consequences.

The performance impact depends on the workload and the characteristics of the
machine and the machine I tested on had a large Normal zone on node 0 so the
impact is within the noise for the majority of tests. The allocation stats
show more allocation requests were from DMA32 and local node. Running SpecJBB
with multiple JVMs and automatic NUMA balancing disabled the results were

specjbb
                     3.17.0-rc2            3.17.0-rc2
                        vanilla        nodeorder-v1r1
Min    1      29534.00 (  0.00%)     30020.00 (  1.65%)
Min    10    115717.00 (  0.00%)    134038.00 ( 15.83%)
Min    19    109718.00 (  0.00%)    114186.00 (  4.07%)
Min    28    104459.00 (  0.00%)    103639.00 ( -0.78%)
Min    37     98245.00 (  0.00%)    103756.00 (  5.61%)
Min    46     97198.00 (  0.00%)     96197.00 ( -1.03%)
Mean   1      30953.25 (  0.00%)     31917.75 (  3.12%)
Mean   10    124432.50 (  0.00%)    140904.00 ( 13.24%)
Mean   19    116033.50 (  0.00%)    119294.75 (  2.81%)
Mean   28    108365.25 (  0.00%)    106879.50 ( -1.37%)
Mean   37    102984.75 (  0.00%)    106924.25 (  3.83%)
Mean   46    100783.25 (  0.00%)    105368.50 (  4.55%)
Stddev 1       1260.38 (  0.00%)      1109.66 ( 11.96%)
Stddev 10      7434.03 (  0.00%)      5171.91 ( 30.43%)
Stddev 19      8453.84 (  0.00%)      5309.59 ( 37.19%)
Stddev 28      4184.55 (  0.00%)      2906.63 ( 30.54%)
Stddev 37      5409.49 (  0.00%)      3192.12 ( 40.99%)
Stddev 46      4521.95 (  0.00%)      7392.52 (-63.48%)
Max    1      32738.00 (  0.00%)     32719.00 ( -0.06%)
Max    10    136039.00 (  0.00%)    148614.00 (  9.24%)
Max    19    130566.00 (  0.00%)    127418.00 ( -2.41%)
Max    28    115404.00 (  0.00%)    111254.00 ( -3.60%)
Max    37    112118.00 (  0.00%)    111732.00 ( -0.34%)
Max    46    108541.00 (  0.00%)    116849.00 (  7.65%)
TPut   1     123813.00 (  0.00%)    127671.00 (  3.12%)
TPut   10    497730.00 (  0.00%)    563616.00 ( 13.24%)
TPut   19    464134.00 (  0.00%)    477179.00 (  2.81%)
TPut   28    433461.00 (  0.00%)    427518.00 ( -1.37%)
TPut   37    411939.00 (  0.00%)    427697.00 (  3.83%)
TPut   46    403133.00 (  0.00%)    421474.00 (  4.55%)

                            3.17.0-rc2  3.17.0-rc2
                               vanillanodeorder-v1r1
DMA allocs                           0           0
DMA32 allocs                        57     1491992
Normal allocs                 32543566    30026383
Movable allocs                       0           0
Direct pages scanned                 0           0
Kswapd pages scanned                 0           0
Kswapd pages reclaimed               0           0
Direct pages reclaimed               0           0
Kswapd efficiency                 100%        100%
Kswapd velocity                  0.000       0.000
Direct efficiency                 100%        100%
Direct velocity                  0.000       0.000
Percentage direct scans             0%          0%
Zone normal velocity             0.000       0.000
Zone dma32 velocity              0.000       0.000
Zone dma velocity                0.000       0.000
THP fault alloc                  55164       52987
THP collapse alloc                 139         147
THP splits                          26          21
NUMA alloc hit                 4169066     4250692
NUMA alloc miss                      0           0

Note that there were more DMA32 allocations with the patch applied.  In this
particular case there was no difference in numa_hit and numa_miss. The
expectation is that DMA32 was being used at the low watermark instead of
falling into the slow path. kswapd was not woken but it's not worken for
THP allocations.

On 32-bit, this patch defaults to zone-ordering as low memory depletion
can be a serious problem on 32-bit large memory machines. If the default
ordering was node then processes on node 0 will deplete the Normal zone
due to normal activity.  The problem is worse if CONFIG_HIGHPTE is not
set. If combined with large amounts of dirty/writeback pages in Normal
zone then there is also a high risk of OOM. The heuristics are removed
as it's not clear they were ever important on 32-bit. They were only
relevant for setting node-ordering on 64-bit.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:58 -04:00
Mel Gorman 97ee4ba7cb mm: page_alloc: Make paranoid check in move_freepages a VM_BUG_ON
Since 2.6.24 there has been a paranoid check in move_freepages that looks
up the zone of two pages.  This is a very slow path and the only time I've
seen this bug trigger recently is when memory initialisation was broken
during patch development.  Despite the fact it's a slow path, this patch
converts the check to a VM_BUG_ON anyway as it has served its purpose by
now.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:58 -04:00
Xiubo Li b8b2d82532 mm/compaction.c: fix warning of 'flags' may be used uninitialized
C      mm/compaction.o
mm/compaction.c: In function isolate_freepages_block:
mm/compaction.c:364:37: warning: flags may be used uninitialized in this function [-Wmaybe-uninitialized]
       && compact_unlock_should_abort(&cc->zone->lock, flags,
                                     ^

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Andrew Morton ff26f70f43 mm/mmap.c: clean up CONFIG_DEBUG_VM_RB checks
- be consistent in printing the test which failed

- one message was actually wrong (a<b != b>a)

- don't print second bogus warning if browse_rb() failed

Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Johannes Weiner 5705465174 mm: clean up zone flags
Page reclaim tests zone_is_reclaim_dirty(), but the site that actually
sets this state does zone_set_flag(zone, ZONE_TAIL_LRU_DIRTY), sending the
reader through layers indirection just to track down a simple bit.

Remove all zone flag wrappers and just use bitops against zone->flags
directly.  It's just as readable and the lines are barely any longer.

Also rename ZONE_TAIL_LRU_DIRTY to ZONE_DIRTY to match ZONE_WRITEBACK, and
remove the zone_flags_t typedef.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Mark Rustad 7c809968ff mm/page-writeback.c: use min3/max3 macros to avoid shadow warnings
Nested calls to min/max functions result in shadow warnings in W=2 builds.
 Avoid the warning by using the min3 and max3 macros to get the min/max of
3 values instead of nested calls.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Weijie Yang 7ade3c9972 mm: page_alloc: avoid wakeup kswapd on the unintended node
When entering the page_alloc slowpath, we wakeup kswapd on every pgdat
according to the zonelist and high_zoneidx.  However, this doesn't take
nodemask into account, and could prematurely wakeup kswapd on some
unintended nodes.

This patch uses for_each_zone_zonelist_nodemask() instead of
for_each_zone_zonelist() in wake_all_kswapds() to avoid the above
situation.

Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Sasha Levin 81d1b09c6b mm: convert a few VM_BUG_ON callers to VM_BUG_ON_VMA
Trivially convert a few VM_BUG_ON calls to VM_BUG_ON_VMA to extract
more information when they trigger.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Sasha Levin 0bf5513978 mm: introduce dump_vma
Introduce a helper to dump information about a VMA, this also makes
dump_page_flags more generic and re-uses that so the output looks very
similar to dump_page:

[   61.903437] vma ffff88070f88be00 start 00007fff25970000 end 00007fff25992000
[   61.903437] next ffff88070facd600 prev ffff88070face400 mm ffff88070fade000
[   61.903437] prot 8000000000000025 anon_vma ffff88070fa1e200 vm_ops           (null)
[   61.903437] pgoff 7ffffffdd file           (null) private_data           (null)
[   61.909129] flags: 0x100173(read|write|mayread|maywrite|mayexec|growsdown|account)

[akpm@linux-foundation.org: make dump_vma() require CONFIG_DEBUG_VM]
[swarren@nvidia.com: fix dump_vma() compilation]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00
Rob Jones b208ce3292 mm/slab.c: use __seq_open_private() instead of seq_open()
Using __seq_open_private() removes boilerplate code from slabstats_open()

The resultant code is shorter and easier to follow.

This patch does not change any functionality.

Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:57 -04:00