Commit Graph

782 Commits

Author SHA1 Message Date
Rafael J. Wysocki f8824cee40 PM: Allow device drivers to use dpm_wait()
There are some dependencies between devices (in particular, between
EHCI USB controllers and their OHCI/UHCI siblings) which are not
reflected by the structure of the device tree.  With synchronous
suspend and resume these dependencies are taken into accout
automatically, because the devices in question are always registered
in the right order, but to meet these constraints with asynchronous
suspend and resume the drivers of these devices will need to use
dpm_wait() in their suspend/resume routines, so introduce a helper
function allowing them to do that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:11 +01:00
Rafael J. Wysocki 97df8c1299 PM: Start asynchronous resume threads upfront
It has been shown by testing that total device resume time can be
reduced significantly (by as much as 50% or more) if the async
threads executing some devices' resume routines are all started
before the main resume thread starts to handle the "synchronous"
devices.

This is a consequence of the fact that the slowest devices tend to be
located at the end of dpm_list, so their resume routines are started
very late.  Consequently, they have to wait for all the preceding
"synchronous" devices before their resume routines can be started
by the main resume thread, even if they are "asynchronous".  By
starting their async threads upfront we effectively move those
devices towards the beginning of dpm_list, without breaking their
ordering with respect to their parents and children.  As a result,
their resume routines are started much earlier and we are able to
save much more device resume time this way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:11 +01:00
Rafael J. Wysocki 5a2eb8585f PM: Add facility for advanced testing of async suspend/resume
Add configuration switch CONFIG_PM_ADVANCED_DEBUG for compiling in
extra PM debugging/testing code allowing one to access some
PM-related attributes of devices from the user space via sysfs.

If CONFIG_PM_ADVANCED_DEBUG is set, add sysfs attribute power/async
for every device allowing the user space to access the device's
power.async_suspend flag and modify it, if desired.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:10 +01:00
Rafael J. Wysocki 0e06b4a891 PM: Add a switch for disabling/enabling asynchronous suspend/resume
Add sysfs attribute /sys/power/pm_async allowing the user space to
disable/enable asynchronous suspend/resume of devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:10 +01:00
Rafael J. Wysocki 5af84b8270 PM: Asynchronous suspend and resume of devices
Theoretically, the total time of system sleep transitions (suspend
to RAM, hibernation) can be reduced by running suspend and resume
callbacks of device drivers in parallel with each other.  However,
there are dependencies between devices such that we're not allowed
to suspend the parent of a device before suspending the device
itself.  Analogously, we're not allowed to resume a device before
resuming its parent.

The most straightforward way to take these dependencies into accout
is to start the async threads used for suspending and resuming
devices at the core level, so that async_schedule() is called for
each suspend and resume callback supposed to be executed
asynchronously.

For this purpose, introduce a new device flag, power.async_suspend,
used to mark the devices whose suspend and resume callbacks are to be
executed asynchronously (ie. in parallel with the main suspend/resume
thread and possibly in parallel with each other) and helper function
device_enable_async_suspend() allowing one to set power.async_suspend
for given device (power.async_suspend is unset by default for all
devices).  For each device with the power.async_suspend flag set the
PM core will use async_schedule() to execute its suspend and resume
callbacks.

The async threads started for different devices as a result of
calling async_schedule() are synchronized with each other and with
the main suspend/resume thread with the help of completions, in the
following way:
(1) There is a completion, power.completion, for each device object.
(2) Each device's completion is reset before calling async_schedule()
    for the device or, in the case of devices with the
    power.async_suspend flags unset, before executing the device's
    suspend and resume callbacks.
(3) During suspend, right before running the bus type, device type
    and device class suspend callbacks for the device, the PM core
    waits for the completions of all the device's children to be
    completed.
(4) During resume, right before running the bus type, device type and
    device class resume callbacks for the device, the PM core waits
    for the completion of the device's parent to be completed.
(5) The PM core completes power.completion for each device right
    after the bus type, device type and device class suspend (or
    resume) callbacks executed for the device have returned.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:09 +01:00
Rafael J. Wysocki 8cc6b39ff3 PM: Add parent information to timing messages
Add parent information to the messages printed by the suspend/resume
core when initcall_debug is set.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:09 +01:00
Rafael J. Wysocki 5382363917 PM / Runtime: Add sysfs switch for disabling device run-time PM
Add new device sysfs attribute, power/control, allowing the user
space to block the run-time power management of the devices.  If this
attribute is set to "on", the driver of the device won't be able to power
manage it at run time (without breaking the rules) and the device will
always be in the full power state (except when the entire system goes
into a sleep state).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2010-02-26 20:39:08 +01:00
Laurent Pinchart 18d19c9645 class: Free the class private data in class_release
Fix a memory leak by freeing the memory allocated in __class_register
for the class private data.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16 15:43:00 -08:00
Greg Kroah-Hartman bd796671f0 Revert "sysdev: fix prototype for memory_sysdev_class show/store functions"
This reverts commit 8ff410daa0

It should not have been sent to Linus's tree yet, as it depends
on changes that are queued up in my driver-core for the .34 kernel
merge.

Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20 15:02:13 -08:00
Heiko Carstens f776c5ec46 driver-core: fix devtmpfs crash on s390
On Mon, Jan 18, 2010 at 05:26:20PM +0530, Sachin Sant wrote:
> Hello Heiko,
>
> Today while trying to boot next-20100118 i came across
> the following Oops :
>
> Brought up 4 CPUs
> Unable to handle kernel pointer dereference at virtual kernel address 0000000000
> 543000
> Oops: 0004 #1 SMP
> Modules linked in:
> CPU: 0 Not tainted 2.6.33-rc4-autotest-next-20100118-5-default #1
> Process swapper (pid: 1, task: 00000000fd792038, ksp: 00000000fd797a30)
> Krnl PSW : 0704200180000000 00000000001eb0b8 (shmem_parse_options+0xc0/0x328)
>           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
> Krnl GPRS: 000000000054388a 000000000000003d 0000000000543836 000000000000003d
>           0000000000000000 0000000000483f28 0000000000536112 00000000fd797d00
>           00000000fd4ba100 0000000000000100 0000000000483978 0000000000543832
>           0000000000000000 0000000000465958 00000000001eb0b0 00000000fd797c58
> Krnl Code: 00000000001eb0aa: c0e5000994f1       brasl   %r14,31da8c
>           00000000001eb0b0: b9020022           ltgr    %r2,%r2
>           00000000001eb0b4: a784010b           brc     8,1eb2ca
>          >00000000001eb0b8: 92002000           mvi     0(%r2),0
>           00000000001eb0bc: a7080000           lhi     %r0,0
>           00000000001eb0c0: 41902001           la      %r9,1(%r2)
>           00000000001eb0c4: b9040016           lgr     %r1,%r6
>           00000000001eb0c8: b904002b           lgr     %r2,%r11
> Call Trace:
> (<00000000fd797c50> 0xfd797c50)
> <00000000001eb5da> shmem_fill_super+0x13a/0x25c
> <0000000000228cfa> get_sb_single+0xbe/0xdc
> <000000000034ffc0> dev_get_sb+0x2c/0x38
> <000000000066c602> devtmpfs_init+0x46/0xc0
> <000000000066c53e> driver_init+0x22/0x60
> <000000000064d40a> kernel_init+0x24e/0x3d0
> <000000000010a7ea> kernel_thread_starter+0x6/0xc
> <000000000010a7e4> kernel_thread_starter+0x0/0xc
>
> I never tried to boot a kernel with DEVTMPFS enabled on a s390 box.
> So am wondering if this is supported or not ? If you think this
> is supported i will send a mail to community on this.

There is nothing arch specific to devtmpfs. This part crashes because the
kernel tries to modify the data read-only section which is write protected
on s390.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20 15:02:05 -08:00
Wu Fengguang 8ff410daa0 sysdev: fix prototype for memory_sysdev_class show/store functions
The function prototype mismatches in call stack:

                [<ffffffff81494268>] print_block_size+0x58/0x60
                [<ffffffff81487e3f>] sysdev_class_show+0x1f/0x30
                [<ffffffff811d629b>] sysfs_read_file+0xcb/0x1f0
                [<ffffffff81176328>] vfs_read+0xc8/0x180

Due to prototype mismatch, print_block_size() will sprintf() into
*attribute instead of *buf, hence user space will read the initial
zeros from *buf:
	$ hexdump /sys/devices/system/memory/block_size_bytes
	0000000 0000 0000 0000 0000
	0000008

After patch:
	cat /sys/devices/system/memory/block_size_bytes
	0x8000000

This complements commits c29af9636 and 4a0b2b4dbe.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 12:15:39 -08:00
Wu Fengguang ba168fc37d memory-hotplug: add 0x prefix to HEX block_size_bytes
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 12:15:39 -08:00
Randy Dunlap 0a88422312 power: fix kernel-doc notation
Warning(drivers/base/power/main.c:453): No description found for parameter 'dev'
Warning(drivers/base/power/main.c:453): No description found for parameter 'cb'
Warning(drivers/base/power/main.c:719): No description found for parameter 'dev'
Warning(drivers/base/power/main.c:719): No description found for parameter 'state'
Warning(drivers/base/power/main.c:719): No description found for parameter 'cb'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:06 -08:00
Kay Sievers 8042273801 devtmpfs: unlock mutex in case of string allocation error
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:44 -08:00
Michael Hennerich 0787fdf70b Driver core: export platform_device_register_data as a GPL symbol
This allows MFD's to register/bind drivers for their sub devices while
still being compiled as a module.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:44 -08:00
Phil Carmody 99b28f1b41 driver core: Prevent reference to freed memory on error path
priv is drv->p. So only free drv->p after we've finished using priv.

Found using a static code analysis tool

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:44 -08:00
Thomas Gleixner e6309e7568 Driver-core: Fix bogus 0 error return in device_add()
If device_add() is called with a device which does not have dev->p set
up, then device_private_init() is called. If that succeeds, then the
error variable is set to 0. Now if the dev_name(dev) check further
down fails, then device_add() correctly terminates, but returns 0.
That of course lets the driver progress. If later another driver uses
this half set up device as parent then device_add() of the child
device explodes and renders sysfs completely unusable.

Set the error to -EINVAL if dev_name() check fails.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: "Hans J. Koch" <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:44 -08:00
Phil Carmody 099c2f21d8 Driver core: driver_attribute parameters can often be const*
Many struct driver_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore make
the promise not to, which will let those descriptors be put in
a ro section.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:43 -08:00
Phil Carmody 66ecb92be9 Driver core: bin_attribute parameters can often be const*
Many struct bin_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore
make the promise not to, which will let those descriptors
be put in a ro section.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:43 -08:00
Phil Carmody 26579ab70a Driver core: device_attribute parameters can often be const*
Most device_attributes are const, and are begging to be
put in a ro section. However, the create and remove
file interfaces were failing to propagate the const promise
which the only functions they call offer.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:43 -08:00
Thomas Gleixner f1f76f865b devtmpfs: Convert dirlock to a mutex
devtmpfs has a rw_lock dirlock which serializes delete_path and
create_path.

This code was obviously never tested with the usual set of debugging
facilities enabled. In the dirlock held sections the code calls:

 - vfs functions which take mutexes
 - kmalloc(, GFP_KERNEL)

In both code pathes the might sleep warning triggers and spams dmesg.

Convert the rw_lock to a mutex. There is no reason why this needs to
be a rwlock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23 11:23:42 -08:00
Linus Torvalds 2218a4fcf3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Runtime PM documentation update
  PM / Runtime: Use device type and device class callbacks
  PM: Use pm_runtime_put_sync in system resume
  PM: Measure device suspend and resume times
  PM: Make the initcall_debug style timing for suspend/resume complete
2009-12-22 14:22:05 -08:00
Rafael J. Wysocki a6ab7aa9f4 PM / Runtime: Use device type and device class callbacks
The power management of some devices is handled through device types
and device classes rather than through bus types.  Since these
devices may also benefit from using the run-time power management
core, extend it so that the device type and device class run-time PM
callbacks can be taken into consideration by it if the bus type
callback is not defined.

Update the run-time PM core documentation to reflect this change.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-22 20:43:17 +01:00
Alan Stern aa0baaef97 PM: Use pm_runtime_put_sync in system resume
This patch (as1317) fixes a bug in the PM core.  When a device is
resumed following a system sleep, the core decrements the device's
runtime PM usage counter but doesn't issue an idle notification if the
counter reaches 0.  This could prevent an otherwise unused device from
being runtime-suspended again after the system sleep.

The fix is to call pm_runtime_put_sync() instead of
pm_runtime_put_noidle().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-21 02:46:11 +01:00
Robert Jennings 925cc71e51 mm: Add notifier in pageblock isolation for balloon drivers
Memory balloon drivers can allocate a large amount of memory which is not
movable but could be freed to accomodate memory hotplug remove.

Prior to calling the memory hotplug notifier chain the memory in the
pageblock is isolated.  Currently, if the migrate type is not
MIGRATE_MOVABLE the isolation will not proceed, causing the memory removal
for that page range to fail.

Rather than failing pageblock isolation if the migrateteype is not
MIGRATE_MOVABLE, this patch checks if all of the pages in the pageblock,
and not on the LRU, are owned by a registered balloon driver (or other
entity) using a notifier chain.  If all of the non-movable pages are owned
by a balloon, they can be freed later through the memory notifier chain
and the range can still be isolated in set_migratetype_isolate().

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:53:36 +11:00
Rafael J. Wysocki ecf762b258 PM: Measure device suspend and resume times
Measure and print the time of suspending and resuming all devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-18 01:57:47 +01:00
Rafael J. Wysocki 875ab0b74e PM: Make the initcall_debug style timing for suspend/resume complete
Commit f251177486
(PM: Add initcall_debug style timing for suspend/resume) introduced
basic timing instrumentation, needed for a scritps/bootgraph.pl
equivalent or humans, but it missed the fact that bus types and
device classes which haven't been switched to using struct dev_pm_ops
objects yet need special handling.  As a result, the suspend/resume
timing information is only available for devices whose bus types or
device classes use struct dev_pm_ops objects, so the majority of
devices is not covered.

Fix this by adding basic suspend/resume timing instrumentation for
devices whose bus types and device classes still don't use struct
dev_pm_ops objects for power management.  To reduce code duplication
move the timing code to helper functions.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-18 01:57:31 +01:00
Linus Torvalds d4220f987c Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (34 commits)
  HWPOISON: Remove stray phrase in a comment
  HWPOISON: Try to allocate migration page on the same node
  HWPOISON: Don't do early filtering if filter is disabled
  HWPOISON: Add a madvise() injector for soft page offlining
  HWPOISON: Add soft page offline support
  HWPOISON: Undefine short-hand macros after use to avoid namespace conflict
  HWPOISON: Use new shake_page in memory_failure
  HWPOISON: Use correct name for MADV_HWPOISON in documentation
  HWPOISON: mention HWPoison in Kconfig entry
  HWPOISON: Use get_user_page_fast in hwpoison madvise
  HWPOISON: add an interface to switch off/on all the page filters
  HWPOISON: add memory cgroup filter
  memcg: add accessor to mem_cgroup.css
  memcg: rename and export try_get_mem_cgroup_from_page()
  HWPOISON: add page flags filter
  mm: export stable page flags
  HWPOISON: limit hwpoison injector to known page types
  HWPOISON: add fs/device filters
  HWPOISON: return 0 to indicate success reliably
  HWPOISON: make semantics of IGNORED/DELAYED clear
  ...
2009-12-16 12:36:49 -08:00
Andi Kleen facb6011f3 HWPOISON: Add soft page offline support
This is a simpler, gentler variant of memory_failure() for soft page
offlining controlled from user space.  It doesn't kill anything, just
tries to invalidate and if that doesn't work migrate the
page away.

This is useful for predictive failure analysis, where a page has
a high rate of corrected errors, but hasn't gone bad yet. Instead
it can be offlined early and avoided.

The offlining is controlled from sysfs, including a new generic
entry point for hard page offlining for symmetry too.

We use the page isolate facility to prevent re-allocation
race. Normally this is only used by memory hotplug. To avoid
races with memory allocation I am using lock_system_sleep().
This avoids the situation where memory hotplug is about
to isolate a page range and then hwpoison undoes that work.
This is a big hammer currently, but the simplest solution
currently.

When the page is not free or LRU we try to free pages
from slab and other caches. The slab freeing is currently
quite dumb and does not try to focus on the specific slab
cache which might own the page. This could be potentially
improved later.

Thanks to Fengguang Wu and Haicheng Li for some fixes.

[Added fix from Andrew Morton to adapt to new migrate_pages prototype]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-12-16 12:20:00 +01:00
Rafael J. Wysocki d8bed5a4f3 PM: rwsem.h need not be included into main.c
It is not necessary to include <linux/rwsem.h> into
drivers/base/power/main.c, so don't do that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-15 20:42:06 +01:00
Rafael J. Wysocki 33c3374031 PM: Remove unnecessary goto from device_resume_noirq()
In device_resume_noirq() there is the 'End' label and the associated
goto statement that aren't strictly necessary, so rework the code to
get rid of them.  Also modify device_suspend_noirq() so that it looks
completely analogous to device_resume_noirq().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-15 20:42:06 +01:00
Arjan van de Ven f251177486 PM: Add initcall_debug style timing for suspend/resume
In order to diagnose overall suspend/resume times, we need
basic instrumentation to break down the total time into per
device timing, similar to initcall_debug.

This patch adds the basic timing instrumentation, needed
for a scritps/bootgraph.pl equivalent or humans.
The bootgraph.pl program is still a work in progress, but
is far enough along to know that this patch is sufficient.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-15 20:42:06 +01:00
Alan Stern 1d531c14d2 PM: allow for usage_count > 0 in pm_runtime_get()
This patch (as1308c) fixes __pm_runtime_get().  Currently the routine
will resume a device if the prior usage count was 0.  But this isn't
right; thanks to pm_runtime_get_noresume() the usage count can be
positive even while the device is suspended.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-15 20:42:06 +01:00
David Rientjes 9ae49fab23 mm: slab-allocate memory section nodemask for large systems
Nodemasks should not be allocated on the stack for large systems (when it
is larger than 256 bytes) since there is a threat of overflow.

This patch causes the unregister_mem_sect_under_nodes() nodemask to be
allocated on the stack for smaller systems and be allocated by slab for
larger systems.

GFP_KERNEL is used since remove_memory_block() can block.

Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Alex Chiang <achiang@hp.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:20 -08:00
Alex Chiang 1830794ae6 mm: add numa node symlink for cpu devices in sysfs
You can discover which CPUs belong to a NUMA node by examining
/sys/devices/system/node/node#/

However, it's not convenient to go in the other direction, when looking at
/sys/devices/system/cpu/cpu#/

Yes, you can muck about in sysfs, but adding these symlinks makes life a
lot more convenient.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:18 -08:00
Alex Chiang b9d52dad94 mm: refactor unregister_cpu_under_node()
By returning early if the node is not online, we can unindent the
interesting code by two levels.

No functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:17 -08:00
Alex Chiang f8246f3159 mm: refactor register_cpu_under_node()
By returning early if the node is not online, we can unindent the
interesting code by one level.

No functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:17 -08:00
Alex Chiang dee5d0d518 mm: add numa node symlink for memory section in sysfs
Commit c04fc586c (mm: show node to memory section relationship with
symlinks in sysfs) created symlinks from nodes to memory sections, e.g.

/sys/devices/system/node/node1/memory135 -> ../../memory/memory135

If you're examining the memory section though and are wondering what node
it might belong to, you can find it by grovelling around in sysfs, but
it's a little cumbersome.

Add a reverse symlink for each memory section that points back to the
node to which it belongs.

Signed-off-by: Alex Chiang <achiang@hp.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:17 -08:00
Lee Schermerhorn 39da08cb07 hugetlb: offload per node attribute registrations
Offload the registration and unregistration of per node hstate sysfs
attributes to a worker thread rather than attempt the
allocation/attachment or detachment/freeing of the attributes in the
context of the memory hotplug handler.

I don't know that this is absolutely required, but the registration can
sleep in allocations and other mem hot plug handlers do it this way.  If
it turns out this is NOT required, we can drop this patch.

N.B.,  Only tested build, boot, libhugetlbfs regression.
       i.e., no memory hotplug testing.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:13 -08:00
Lee Schermerhorn 4faf8d950e hugetlb: handle memory hot-plug events
Register per node hstate attributes only for nodes with memory.  As
suggested by David Rientjes.

With Memory Hotplug, memory can be added to a memoryless node and a node
with memory can become memoryless.  Therefore, add a memory on/off-line
notifier callback to [un]register a node's attributes on transition
to/from memoryless state.

N.B.,  Only tested build, boot, libhugetlbfs regression.
       i.e., no memory hotplug testing.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:13 -08:00
Lee Schermerhorn 9a30523066 hugetlb: add per node hstate attributes
Add the per huge page size control/query attributes to the per node
sysdevs:

/sys/devices/system/node/node<ID>/hugepages/hugepages-<size>/
	nr_hugepages       - r/w
	free_huge_pages    - r/o
	surplus_huge_pages - r/o

The patch attempts to re-use/share as much of the existing global hstate
attribute initialization and handling, and the "nodes_allowed" constraint
processing as possible.

Calling set_max_huge_pages() with no node indicates a change to global
hstate parameters.  In this case, any non-default task mempolicy will be
used to generate the nodes_allowed mask.  A valid node id indicates an
update to that node's hstate parameters, and the count argument specifies
the target count for the specified node.  From this info, we compute the
target global count for the hstate and construct a nodes_allowed node mask
contain only the specified node.

Setting the node specific nr_hugepages via the per node attribute
effectively ignores any task mempolicy or cpuset constraints.

With this patch:

(me):ls /sys/devices/system/node/node0/hugepages/hugepages-2048kB
./  ../  free_hugepages  nr_hugepages  surplus_hugepages

Starting from:
Node 0 HugePages_Total:     0
Node 0 HugePages_Free:      0
Node 0 HugePages_Surp:      0
Node 1 HugePages_Total:     0
Node 1 HugePages_Free:      0
Node 1 HugePages_Surp:      0
Node 2 HugePages_Total:     0
Node 2 HugePages_Free:      0
Node 2 HugePages_Surp:      0
Node 3 HugePages_Total:     0
Node 3 HugePages_Free:      0
Node 3 HugePages_Surp:      0
vm.nr_hugepages = 0

Allocate 16 persistent huge pages on node 2:
(me):echo 16 >/sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages

[Note that this is equivalent to:
	numactl -m 2 hugeadmin --pool-pages-min 2M:+16
]

Yields:
Node 0 HugePages_Total:     0
Node 0 HugePages_Free:      0
Node 0 HugePages_Surp:      0
Node 1 HugePages_Total:     0
Node 1 HugePages_Free:      0
Node 1 HugePages_Surp:      0
Node 2 HugePages_Total:    16
Node 2 HugePages_Free:     16
Node 2 HugePages_Surp:      0
Node 3 HugePages_Total:     0
Node 3 HugePages_Free:      0
Node 3 HugePages_Surp:      0
vm.nr_hugepages = 16

Global controls work as expected--reduce pool to 8 persistent huge pages:
(me):echo 8 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

Node 0 HugePages_Total:     0
Node 0 HugePages_Free:      0
Node 0 HugePages_Surp:      0
Node 1 HugePages_Total:     0
Node 1 HugePages_Free:      0
Node 1 HugePages_Surp:      0
Node 2 HugePages_Total:     8
Node 2 HugePages_Free:      8
Node 2 HugePages_Surp:      0
Node 3 HugePages_Total:     0
Node 3 HugePages_Free:      0
Node 3 HugePages_Surp:      0

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:12 -08:00
Linus Torvalds d0316554d3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
	arch/x86/kvm/svm.c
	mm/slab.c
2009-12-14 09:58:24 -08:00
Linus Torvalds 09cea96caa Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
  powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
  MAINTAINERS: Add PowerPC patterns
  powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
  powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
  powerpc: Make "intspec" pointers in irq_host->xlate() const
  powerpc/8xx: DTLB Miss cleanup
  powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
  powerpc/8xx: Start using dcbX instructions in various copy routines
  powerpc/8xx: Restore _PAGE_WRITETHRU
  powerpc/8xx: Add missing Guarded setting in DTLB Error.
  powerpc/8xx: Fixup DAR from buggy dcbX instructions.
  powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
  powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
  powerpc/8xx: Invalidate non present TLBs
  powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
  pseries/pseries: Add code to online/offline CPUs of a DLPAR node
  powerpc: stop_this_cpu: remove the cpu from the online map.
  powerpc/pseries: Add kernel based CPU DLPAR handling
  sysfs/cpu: Add probe/release files
  powerpc/pseries: Kernel DLPAR Infrastructure
  ...
2009-12-12 14:27:24 -08:00
Alan Stern 3589972e51 Driver core: fix race in dev_driver_string
This patch (as1310) works around a race in dev_driver_string().  If
the device is unbound while the function is running, dev->driver might
become NULL after we test it and before we dereference it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:55 -08:00
Magnus Damm c60e0504c8 Driver Core: Early platform driver buffer
Add early_platform_init_buffer() support and update the
early platform driver code to allow passing parameters
to the driver on the kernel command line.

early_platform_init_buffer() simply allows early platform
drivers to provide a pointer and length to a memory area
where the remaining part of the kernel command line option
will be stored.

Needed to pass baud rate and other serial port options
to the reworked early serial console code on SuperH.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:55 -08:00
Eric W. Biederman 18ef545e47 Driver core: Don't remove kobjects in device_shutdown.
device_shutdown is defined to just shutdown the hardware and to not
clean up any kernel data structures.  Therefore don't put the kobjects
for /sys/dev and /sys/dev/block and /sys/dev/char.

This ensures we don't remove /sys/dev/block and /sys/dev/char while
we still have symlinks from there to the actual devices.

Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:52 -08:00
Johannes Berg 9ebfbd45f9 firmware_class: make request_firmware_nowait more useful
Unfortunately, one cannot hold on to the struct firmware
that request_firmware_nowait() hands off, which is needed
in some cases. Allow this by requiring the callback to
free it (via release_firmware).

Additionally, give it a gfp_t parameter -- all the current
users call it from a GFP_KERNEL context so the GFP_ATOMIC
isn't necessary. This also marks an API break which is
useful in a sense, although that is obviously not the
primary purpose of this change.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: Abhay Salunke <abhay_salunke@dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:52 -08:00
Kay Sievers 03d673e6af Driver-Core: devtmpfs - set root directory mode to 0755
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mark Rosenstand <rosenstand@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:52 -08:00
Kay Sievers ad72956df2 Driver Core: devtmpfs: cleanup node on device creation error
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:52 -08:00
Kay Sievers 015bf43b07 Driver Core: devtmpfs: do not remove non-kernel-created directories
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:52 -08:00