Commit Graph

2482 Commits

Author SHA1 Message Date
Johannes Berg bc4934bc61 mac80211: fix work removal on deauth request
When deauth is requested while an auth or assoc
work item is in progress, we currently delete it
without regard for any state it might need to
clean up. Fix it by cleaning up for those items.

In the case Pontus found, the problem manifested
itself as such:

authenticate with 00:23:69:aa:dd:7b (try 1)
authenticated
failed to insert Dummy STA entry for the AP (error -17)
deauthenticating from 00:23:69:aa:dd:7b by local choice (reason=2)

It could also happen differently if the driver
uses the tx_sync callback.

We can't just call the ->done() method of the work
items because that will lock up due to the locking
in cfg80211. This fix isn't very clean, but that
seems acceptable since I have patches pending to
remove this code completely.

Cc: stable@vger.kernel.org
Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Tested-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18 14:38:06 -05:00
Javier Cardona 65e8b0ccb6 mac80211: Use the right headroom size for mesh mgmt frames
Use local->tx_headroom instad of local->hw.extra_tx_headroom.
local->tx_headroom is the max of hw.extra_tx_headroom required by the
driver and the headroom required by mac80211 for status reporting.  On
drivers where hw.extra_tx_headroom is smaller than what mac80211
requires (e.g. ath5k), we would not reserve sufficient buffer space to
report tx status.

Also, don't reserve local->tx_headroom + local->hw.extra_tx_headroom.

Reported-by: Simon Morgenthaler <s.morgenthaler@students.unibe.ch>
Reported-by: Kai Scharwies <kai@scharwies.de>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18 14:38:06 -05:00
Johannes Berg 9446f3efc5 mac80211: fix debugfs key->station symlink
Since stations moved into a virtual interface
subdirectory, this link has been broken. Fix it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18 14:38:05 -05:00
Helmut Schaa 544204733a mac80211: Fix possible race between sta_unblock and network softirq
All other code paths in sta_unblock synchronize with the network
softirq by using local_bh_disable/enable. Do the same around
ieee80211_sta_ps_deliver_wakeup.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17 10:12:27 -05:00
Yoni Divinsky d32a102819 mac80211: fix tx->skb NULL pointer dereference
In function ieee80211_tx_h_encrypt the var info was
initialized from tx->skb, since the fucntion
is called after the function ieee80211_tx_h_fragment
tx->skb is not valid anymore.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-16 15:01:16 -05:00
Jesper Juhl 74b8cc3d59 Net, mac80211: Fix resource leak in ieee80211_rx_h_mesh_fwding()
We may leak the 'fwd_skb' we skb_copy() in ieee80211_rx_h_mesh_fwding() if
we take the 'else' branch in the 'if' statement just below. If we take
that branch we'll end up returning from the function and since we've not
assigned 'fwd_skb' to anything at that point, we leak it when the variable
goes out of scope.

The simple fix seems to be to just kfree_skb(fwd_skb); just before we
return. That is what this patch does.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-16 15:01:15 -05:00
Johannes Berg 543d1b92d5 mac80211: fix no-op authorized transitions
When userspace attempts to authorize a station
that is already authorized, nothing happens as
you'd expect. Similarly, when it unauthorizes
a station that is associated, nothing happens.

However, when it unauthorizes a station that
isn't even associated yet, we erroneously try
to move the station to associated. This seems
to happen occasionally as a result of a race
when wpa_supplicant attempts to unauthorize
the port in managed mode. Particularly with my
new patches to keep stations, it can then move
a station into ASSOCIATED state before we have
really associated, which is really confusing.

I introduced this bug in
"mac80211: refactor station state transitions"

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-13 14:40:58 -05:00
Eric Dumazet cf778b00e9 net: reintroduce missing rcu_assign_pointer() calls
commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to
RCU_INIT_POINTER) did a lot of incorrect changes, since it did a
complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x,
y).

We miss needed barriers, even on x86, when y is not NULL.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-12 12:26:56 -08:00
Stanislaw Gruszka 1140afa862 mac80211: fix rx->key NULL pointer dereference in promiscuous mode
Since:

commit 816c04fe7e
Author: Christian Lamparter <chunkeey@googlemail.com>
Date:   Sat Apr 30 15:24:30 2011 +0200

    mac80211: consolidate MIC failure report handling

is possible to that we dereference rx->key == NULL when driver set
RX_FLAG_MMIC_STRIPPED and not RX_FLAG_IV_STRIPPED and we are in
promiscuous mode. This happen with rt73usb and rt61pci at least.

Before the commit we always check rx->key against NULL, so I assume
fix should be done in mac80211 (also mic_fail path has similar check).

References:
https://bugzilla.redhat.com/show_bug.cgi?id=769766
http://rt2x00.serialmonkey.com/pipermail/users_rt2x00.serialmonkey.com/2012-January/004395.html

Cc: stable@vger.kernel.org # 3.0+
Reported-by: Stuart D Gathman <stuart@gathman.org>
Reported-by: Kai Wohlfahrt <kai.scorpio@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-11 15:14:50 -05:00
John W. Linville 1032c736e8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/wireless/b43legacy/dma.c
2012-01-05 10:13:24 -05:00
Mohammed Shafi Shajakhan 67f61261b6 mac80211: remove dead code
ieee80211_offchannel_enable_all_ps function is no longer used
and looks like its logic is extensively handled in
ieee80211_offchannel_stop_vifs

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:31:47 -05:00
Yogesh Ashok Powar 7f28197560 mac80211: Call driver commands after drv_start in mac80211 restart code
Ideally, hardware/firmware initialization is complete after the
drv_start routine. In mac80211 restart code (ieee80211_reconfig),
defer calling the driver commands i.e. setup fragmentation
threshold, rts threshold and coverage class till drv_start
routine is called.

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>

v2: Removed extra blank line added.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:31:46 -05:00
Mohammed Shafi Shajakhan 30fa904724 mac80211: use RCU read locks for sta_info_get
this is being recently introduced by the commit
a85e1d5597

Cc: Paul Stewart <pstew@google.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:46 -05:00
Mohammed Shafi Shajakhan e46a2cf9e1 mac80211: fix kernel panic in IBSS due to a regression
kernel panic occurs when we create an IBSS mode and leave it for
sometime without any joiner and this is introduced by the
commit ec2b774e7c where we don't
put proper braces for 'list_for_each_entry_safe' and we pass an
invalid 'sta' pointer to __sta_info_destroy

EIP is at __list_add+0xe/0xa0
EAX: f3b63db4 EBX: 00000000 ECX: eab88c1c EDX: 00000000
ESI: 00000000 EDI: 00000246 EBP: f3b63d80 ESP: f3b63d58
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process kworker/u:2 (pid: 198, ti=f3b62000 task=f3afbea0
task.ti=f3b62000)
Stack:
00000000 00000000 f9ef9821 00000000 00000000 eab88c30
f3b63d80 c017f623
eab88bf0 eab88bf0 f3b63dd0 c066f925 00000000 00000002
00000000 f9ef9821
f3b63da0 c0180a2b eab88c1c eab88c30 00000002 f3afbea0
eab88bf4 f3b63db4
 Call Trace:
[<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60
[mac80211]
[<c017f623>] ? debug_mutex_add_waiter+0x23/0x60
[<c066f925>] __mutex_lock_common+0xd5/0x390
[<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60
[mac80211]
[<c0180a2b>] ? trace_hardirqs_off+0xb/0x10
[<c066fd37>] mutex_lock_nested+0x47/0x60
[<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60
[mac80211]
[<f9ef9821>] __ieee80211_stop_tx_ba_session+0x31/0x60
[mac80211]
[<f9ef8989>] ieee80211_sta_tear_down_BA_sessions+0x39/0x60 [mac80211]
[<f9ef1a67>] __sta_info_destroy+0x57/0x780 [mac80211]
[<f9ef2223>] ieee80211_sta_expire+0x93/0xb0 [mac80211]
[<f9efc8f6>] ieee80211_ibss_work+0x2d6/0x530 [mac80211]

Cc: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:46 -05:00
Mohammed Shafi Shajakhan de2ee84db6 mac80211: fix scan state machine
when we run high bandwidth UDP traffic and we trigger a scan, the scan
state machine seems to be looping in SUSPEND->RESUME->DECISION->SUSPEND
and SET_CHANNEL seems to be never called as 'tx_empty' is never true
while running UDP traffic. fix this by settting SET_CHANNEL state when
we get into RESUME state.

Cc: Leela Kella <leela@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:46 -05:00
Eliad Peller f6e8cb72ad mac80211: always clear SDATA_STATE_OFFCHANNEL flag
If the vif is stopped while it is offchannel (e.g. right
after p2p negotiation) the SDATA_STATE_OFFCHANNEL flag
is never get cleared, resulting in various bad effects
(e.g. GO can't start beaconing).

Fix it by clearing the SDATA_STATE_OFFCHANNEL flag
even if the vif is stopped.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:43 -05:00
Helmut Schaa b423db5b35 mac80211: Remove superfluous ieee80211_rx_h_remove_qos_control
This seems to not serve any purpose anymore, at least all frame
processing afterwards seems to be able to deal with QoS frames. So,
let's save the expensive memmove and just leave the QoS header in the
802.11 frame for further processing.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:28:07 -05:00
John W. Linville 57adc1fcba Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/wireless/b43/dma.c
	drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2012-01-03 15:16:34 -05:00
Helmut Schaa aef6c928a9 mac80211: Keep skb->piority for relayed frames in AP mode
When mac80211 relays a frame from STA1 to STA2 in AP mode it will get
re-classified in the tx path. Unfortunately the frame protocol field
is always set to ETH_P_8023 while the classification only kicks in
for ETH_P_IP. Hence, a high priority frame from STA1 will be send to
STA2 as best effort.

Instead of running classification on the frame just use the same
priority as STA1 did. Do this by adding 256 to the skb->priority
to allow cfg80211_classify8021d to shortcut frame classification.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-21 15:07:52 -05:00
Marek Lindner ec2b774e7c mac80211: ibss should not purge clients it is not responsible for
The IBSS merge code calls ieee80211_sta_expire() with a relatively
short expire timeout that purges other clients prematurely. The
expire function has to check that only the clients belonging to
the vif in question are purged.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-21 15:06:12 -05:00
Rusty Russell 3db1cd5c05 net: fix assignment of 0/1 to bool variables.
DaveM said:
   Please, this kind of stuff rots forever and not using bool properly
   drives me crazy.

Joe Perches <joe@perches.com> gave me the spatch script:

	@@
	bool b;
	@@
	-b = 0
	+b = false
	@@
	bool b;
	@@
	-b = 1
	+b = true

I merely installed coccinelle, read the documentation and took credit.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19 22:27:29 -05:00
Yogesh Ashok Powar 27bf88829f mac80211: Fixing sparse warning at sta_info.c
The commit 42624d4913
created following sparse warning
>net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces)
>net/mac80211/sta_info.c:965:24:    expected struct tid_ampdu_tx *tid_tx
>net/mac80211/sta_info.c:965:24:    got struct tid_ampdu_tx [noderef] <asn:4>*<noident>

Making use of rcu_dereference_protected to fix the problem.

V2:
 - Replacing rcu_dereference with rcu_dereference_protected
   as suggested by Johannes.
 - Adding mutex_lock/unlock to satisfy the condition at
   rcu_dereference_protected

Cc: Nishant Sarmukadam <nishants@marvell.com>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19 15:06:09 -05:00
Johannes Berg 1d8d3dec5f mac80211: handle SMPS action frames
When a peer changes SMPS state we should update
rate control so it doesn't have to detect it by
itself. It can't detect "dynamic" mode anyway
since that just requires rts-cts handshaking.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19 14:40:22 -05:00
Paul Stewart a85e1d5597 cfg80211: Return beacon loss count in station
If station info contains a beacon loss count, return
it to userspace.

Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19 14:34:13 -05:00
Nikolay Martynov 84381b4ed5 mac80211: split addba retries in time
Currently code allows three (HT_AGG_MAX_RETRIES) unanswered addba
requests. When this limit is reached aggregation is turned off for
given TID permanently. This doesn't seem right: three requests is
not that much, some 'blackout' can happen, but effect of it affects
whole connection indefinitely.
  This patch increases number of retries to 15. Also, when there have
been 3 or more retries it splits further retries apart by 15 seconds
instead of sending them in very short period of time.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19 14:31:37 -05:00
Mohammed Shafi Shajakhan 1478acb392 mac80211: Fix power save in change interface
we found that power save is not getting enabled when we do
change interface in this order STA->IBSS->STA. this is
because ieee80211_setup_sdata clears type-dependent union

Reported-by: Leela Kella <leela@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:35 -05:00
Mohammed Shafi Shajakhan 9c38a8b491 mac80211: remove an unnecessary paraenthesis
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:35 -05:00
Helmut Schaa cf6bb79ad8 mac80211: Use appropriate TID for sending BAR, ADDBA and DELBA frames
Currently BAR, ADDBA and DELBA frames are always sent using AC_VO. If
the TID for which a BA session is established is assigned to a different
queue BAR, ADDBA and DELBA frames can "overtake" frames of the according
BA session.

Hence, always put BA session related frames into the same queue as the
BA sessions data frames.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:35 -05:00
Johannes Berg 4d33960bf9 mac80211: reduce station management complexity
Now that IBSS no longer needs to insert stations
from atomic context, we can get rid of all the
special cases for that, and even get rid of the
sta_lock (though it needs to stay as tim_lock.)

This makes the station management code much more
straight-forward.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:35 -05:00
Johannes Berg 8bf11d8d08 mac80211: delay IBSS station insertion
In order to notify drivers and simplify the station
management code, defer IBSS station insertion to a
work item and don't do it directly while receiving
a frame.

This increases the complexity in IBSS a little bit,
but it's pretty straight forward and it allows us
to reduce the station management complexity (next
patch) considerably.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:34 -05:00
Johannes Berg 56544160d4 mac80211: make address arguments to sta_info_alloc const
No real changes, just note that they are const.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:34 -05:00
Johannes Berg 29623892e1 mac80211: count authorized stations per BSS
Currently, each AP interface will send multicast
traffic if any interface has a station entry even
if that station entry is allocated only. With the
new station state management we can easily fix it
by adding a counter that counts each authorized
station only and send multicast traffic only when
the correct interface has at least one authorized
station.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:34 -05:00
Johannes Berg d9a7ddb05e mac80211: refactor station state transitions
Station entries can have various states, the most
important ones being auth, assoc and authorized.
This patch prepares us for telling the driver about
these states, we don't want to confuse drivers with
strange transitions, so with this we enforce that
they move in the right order between them (back and
forth); some transitions might happen before the
driver even knows about the station, but at least
runtime transitions will be ordered correctly.

As a consequence, IBSS and MESH stations will now
have the ASSOC flag set (so they can transition to
AUTHORIZED), and we can get rid of a special case
in TX processing.

When freeing a station, unwind the state so that
other parts of the code (or drivers later) can rely
on the transitions.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:46:34 -05:00
Johannes Berg 87be1e1e00 mac80211: use station mutex in configuration
There's no need to use RCU here, we can just lock
the station mutex instead. This allows the code
to sleep, which is necessary for later patches.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:45:46 -05:00
Johannes Berg 92b62f28d0 mac80211: remove duplicate TDLS peer verification
This is already checked in cfg80211, so no need
to repeat the checks here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:45:45 -05:00
Johannes Berg bdd90d5e36 cfg80211: validate nl80211 station handling better
The nl80211 station handling code is a bit messy
and doesn't do a lot of validation. It seems like
this could be an issue for drivers that don't use
mac80211 to validate everything.

As cfg80211 doesn't keep station state, move the
validation of allowing supported_rates to change
for TDLS only in station mode to mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15 14:45:45 -05:00
Simon Wunderlich cb71b8d803 mac80211: free skb on error path of ieee80211_ibss_join()
Our new return also created a memleak. The skb should be freed before
returning an error.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14 14:50:11 -05:00
John W. Linville 5d22df200b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-14 14:35:41 -05:00
Eliad Peller 53d69c399a mac80211: don't check sdata_running in vif notifier
The ip address of the vif can be set even before the
vif is up. requiring the vif to be up in the vif
notifier makes the notifer ignore this event, which
causes wrong arp filter configuration later on.

Reported-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13 15:34:15 -05:00
Eliad Peller 0d392e938b mac80211: configure BSS_CHANGED_ARP_FILTER on reconfiguration
Configure arp filtering on sta reconfiguration.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13 15:34:11 -05:00
Dmitry TARNYAGIN cd6c524e9e mac80211: Do not request FIF_BCN_PRBRESP_PROMISC for HW scan.
ieee80211_configure_filter code used local->scanning as a boolean
value when it was a bit mask. Bits SCAN_COMPLETED, SCAN_ABORTED
should not set FIF_BCN_PRBRESP_PROMISC filter.

SCAN_HW_SCANNING should not set FIF_BCN_PRBRESP_PROMISC either,
as there is no explicit filter configuration request from
scan code. If a driver requires FIF_BCN_PRBRESP_PROMISC mode
during HW scanning, it's up to the driver to temporary enable it.

Similar mistake was fixed also in ieee80211_hw_config (power
configuration code).

Verified-by: Vitaly Wool <vitaly.wool@sonyericsson.com>
Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13 15:34:08 -05:00
Helmut Schaa adf5ace5d8 mac80211: Make use of ieee80211_is_* functions in tx status path
Use ieee80211_is_data, ieee80211_is_mgmt and ieee80211_is_first_frag
in the tx status path. This makes the code easier to read and allows us
to remove two local variables: frag and type.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13 15:30:46 -05:00
Yogesh Ashok Powar 42624d4913 mac80211: Purge A-MPDU TX queues before station destructions
When a station leaves suddenly while ampdu traffic to that station is still
running, there is a possibility that the ampdu pending queues are not freed due
to a race condition leading to memory leaks. In '__sta_info_destroy' when we
attempt to destroy the ampdu sessions in 'ieee80211_sta_tear_down_BA_sessions',
the driver calls 'ieee80211_stop_tx_ba_cb_irqsafe' to delete the ampdu
structures (tid_tx) and splice the pending queues and this job gets queued in
sdata workqueue. However, the sta entry can get destroyed before the above work
gets scheduled and hence the race.

Purging the queues and freeing the tid_tx to avoid the leak. The better solution
would be to fix the race, but that can be taken up in a separate patch.

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13 15:30:33 -05:00
Dan Carpenter fb03c5eb8c mac80211: unlock on error path in ieee80211_ibss_join()
We recently introduced a new return here but it needs an unlock first.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13 15:30:25 -05:00
Johannes Berg 15062e6a85 mac80211: fix another race in aggregation start
Emmanuel noticed that when mac80211 stops the queues
for aggregation that can leave a packet pending. This
packet will be given to the driver after the AMPDU
callback, but as a non-aggregated packet which messes
up the sequence number etc.

I also noticed by looking at the code that if packets
are being processed while we clear the WANT_START bit,
they might see it cleared already and queue up on
tid_tx->pending. If the driver then rejects the new
aggregation session we leak the packet.

Fix both of these issues by changing this code to not
stop the queues at all. Instead, let packets queue up
on the tid_tx->pending queue instead of letting them
get to the driver, and add code to recover properly
in case the driver rejects the session.

(The patch looks large because it has to move two
functions to before their new use.)

Cc: stable@vger.kernel.org
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-07 15:09:53 -05:00
Ben Greear 4e79fada02 mac80211: Remove WARN_ON in apply-ht-override logic.
AP interfaces routinely call this logic, so just silently
return when this happens instead of splatting the kernel
logs.

Reported-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06 16:07:07 -05:00
Johannes Berg 3df6eaea76 mac80211: accept public action frames with mismatched BSSID
Arik's patch "mac80211: allow action frames with unknown
BSSID in GO mode" allowed any action frames in P2P mode
to go through, but only to cooked monitor interfaces as
the IEEE80211_RX_RA_MATCH was still cleared. As a result
my no-monitor patches broke invitation responses.

Instead of allowing any action frames in P2P GO mode to
go through with a wrong BSSID like that patch did, allow
all public action frames. They will never be processed
by mac80211, but can be reported via nl80211 then.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06 16:07:07 -05:00
Johannes Berg aa5b549215 mac80211: fix retransmit
This fixes another regression from my "pass all
fragments to driver at once" patches -- if the
packet is being retransmitted then we don't go
through all handlers, but we still need to move
it to the skbs list, otherwise we run into the
first warning in __ieee80211_tx() and leak the
skb.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06 16:07:07 -05:00
Alexander Simon 13c40c5468 mac80211: Add HT operation modes for IBSS
The HT mode is set by iw (previous patchsets).
The interface is set into the specified HT mode.
HT mode and capabilities are announced in beacons.

If we add a station that uses HT also, the fastest matching HT mode will
be used for transmission. That means if we are using HT40+ and we add a station
running on HT40-, we would transfer at HT20.

If we join an IBSS with HT40, but the secondary channel is not
available, we will fall back into HT20 as well.

Allow frame aggregation to start in IBSS mode.

Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com>
[siwu@hrz.tu-chemnitz.de: Updates]
* remove implicit channel_type enum assumptions
* use rate_control_rate_init() if channel type changed
* remove channel flags check
* activate HT IBSS feature support
* slightly reword commit message
* rebase on wireless-testing

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06 16:05:25 -05:00
Simon Wunderlich ff3cc5f40f mac80211: handle protection mode, RIFS and ADDBA for HT IBSS
* Follow 802.11n-2009 9.13.3.1 for protection mode and ADDBA
* Send ADDBA only to HT STAs - implement 11.5.1.1 partially

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06 16:05:25 -05:00