Commit Graph

102 Commits

Author SHA1 Message Date
Akinobu Mita 8206937916 [SCSI] scsi_debug: simplify creation and destruction of driver attribute files
Instead of repeatedly calling driver_create_file() to create driver
attribute files, This achieves the same thing by constructing an array
of driver_attribute and setting it to bus_type->drv_groups.

This change simplifies both creation and destruction of the attribute
files, and also removes sparse warning caused by driver_attributes which
are unnecessarily declared as global.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-16 10:57:50 -08:00
Akinobu Mita 51d648af58 [SCSI] scsi_debug: fix sparse warnings related to data integrity field
Each member in data integrity field tuple is big-endian.  But the
endianness of the values being compared with these members are not
annotated.  So this fixes these sparse warnings.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:58:12 +01:00
Akinobu Mita 68aee7ba66 [SCSI] scsi_debug: fix invalid value check for guard module parameter
In the module initialization, invalid value for guard module parameter
is detected by the following check:

        if (scsi_debug_guard > 1) {
                printk(KERN_ERR "scsi_debug_init: guard must be 0 or 1\n");
                return -EINVAL;
        }

But this check isn't enough, because the type of scsi_debug_guard is
'int' and scsi_debug_guard could be a negative value.

This fixes it by changing the type of scsi_debug_guard to 'unsigned int'
instead of adding extra check for a negative value.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:58:12 +01:00
Akinobu Mita 65f72f2a2f [SCSI] scsi_debug: avoid partial copying PI from prot_sglist to dif_storep
If data integrity support is enabled, prot_verify_write() is called in
response to WRITE commands and it verifies protection info from
prot_sglist by comparing against data sglist, and copies protection info
to dif_storep.

When multiple blocks are transfered by a WRITE command, it verifies and
copies these blocks one by one.  So if it fails to verify protection
info in the middle of blocks, the actual data transfer to fake_storep
isn't proceeded at all although protection info for some blocks are
already copied to dif_storep.  Therefore, it breaks the data integrity
between fake_storep and dif_storep.

This fixes it by ensuring that copying protection info to dif_storep is
done after all blocks are successfully verified.  Reusing dif_copy_prot()
with supporting the opposite direction simplifies this fix.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:58:12 +01:00
Akinobu Mita bb8c063c6a [SCSI] scsi_debug: factor out copying PI from dif_storep to prot_sglist
If data integrity support is enabled, prot_verify_read() is called in
response to READ commands and it verifies protection info from dif_storep
by comparing against fake_storep, and copies protection info to
prot_sglist.

This factors out the portion of copying protection info into a separate
function.  It will also be reused in the next change after supporting
the opposite direction (copying prot_sglist to dif_storep).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:58:11 +01:00
Akinobu Mita 14faa944b6 [SCSI] scsi_debug: fix buffer overrun when DIF/DIX is enabled and virtual_gb > 0
If the module parameter virtual_gb is greater than 0, the READ command
may request the blocks which exceed actual ramdisk storage (fake_storep).
prot_verify_read() should treat those blocks as wrap around the end of
fake_storep.  But it actually causes fake_storep and dif_storep buffer
overruns.

This fixes these buffer overruns.  In order to simplify the fix,
this also introduces fake_store() and dif_store() which return
corresponding wrap around addresses.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:58:11 +01:00
Akinobu Mita a027b5b90e [SCSI] scsi_debug: fix logical block provisioning support when unmap_alignment != 0
Commit b90ebc3d5c ("[SCSI] scsi_debug:
fix logical block provisioning support") fixed several issues with
logical block provisioning support, but it still doesn't properly fix
the cases when unmap_alignment > 0.

For example, load scsi_debug module with the following module parameters
and make all blocks mapped by filling the storage with zero.

        # modprobe scsi_debug lbpu=1 unmap_alignment=1 unmap_granularity=4
        # dd if=/dev/zero of=$DEV

Then, try to unmap the first unmappable blocks at lba=1, but GET LBA STATUS
unexpectedly reports that the last UNMAP has done nothing.

        # sg_unmap --lba=1 --num=4 $DEV
        # sg_get_lba_status --lba=1 $DEV
        descriptor LBA: 0x0000000000000001  blocks: 16383  mapped

The problem is in map_index_to_lba(), which should return the first
LBA which is corresponding to a given index of provisioning map
(map_storep).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03 07:28:08 -07:00
Akinobu Mita 150c3544b1 [SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()
With module parameter num_parts > 0, partition table is built on the
ramdisk storage when loading the driver.  Unfortunately, there is an
endianness bug in sdebug_build_parts().  So the partition table is not
correctly initialized on big-endian systems.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03 07:28:08 -07:00
Linus Torvalds 03ce3ca4b0 SCSI for-linus on 20130713
This is the remaining set of SCSI patches for the merge window.  it's mostly
 driver updates (scsi_debug, qla2xxx, storvsc, mp3sas).  There are also several
 bug fixes in fcoe, libfc, and megaraid_sas.  We also have a couple of core
 changes to try to make device destruction more deterministic.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJR4NdLAAoJEDeqqVYsXL0MgLcIAIMpnHPPO0xTB1brAhIA2r4H
 MHcD3/iRu+b+YuzEOuErw+pNzsAUGG9MD1b4m74qZ4z9PaVl4U0lWt61++P/OW91
 ZD9TAF70t+3/R6Wz2eZp8WqmgWkLcEu9wDQxJKGPCcyWB9MphbsxaakM60B1swCy
 5H3VGBWOy8MieLCHzdYgXfB83fnSy/75h/jErDiNwoEUuRci0rb9yOtpNamXPOiB
 2JpW8hegixdup6srt+4Uq3gSWKJhqV1MD3leu6i3cHmoqTGueCX46patqlciSLRo
 lN8fB3RgZjtIj8zattaeaGchEUMAE7yKcbjC+LyGPQe3+DKVutGNrEFT68KKRcQ=
 =7slg
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull final round of SCSI updates from James Bottomley:
 "This is the remaining set of SCSI patches for the merge window.  It's
  mostly driver updates (scsi_debug, qla2xxx, storvsc, mp3sas).  There
  are also several bug fixes in fcoe, libfc, and megaraid_sas.  We also
  have a couple of core changes to try to make device destruction more
  deterministic"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  [SCSI] scsi constants: command, sense key + additional sense strings
  fcoe: Reduce number of sparse warnings
  fcoe: Stop fc_rport_priv structure leak
  libfcoe: Fix meaningless log statement
  libfc: Differentiate echange timer cancellation debug statements
  libfc: Remove extra space in fc_exch_timer_cancel definition
  fcoe: fix the link error status block sparse warnings
  fcoe: Fix smatch warning in fcoe_fdmi_info function
  libfc: Reject PLOGI from nodes with incompatible role
  [SCSI] enable destruction of blocked devices which fail LUN scanning
  [SCSI] Fix race between starved list and device removal
  [SCSI] megaraid_sas: fix a bug for 64 bit arches
  [SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write
  [SCSI] scsi_debug: simplify offset calculation for dif_storep
  [SCSI] scsi_debug: invalidate protection info for unmapped region
  [SCSI] scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1
  [SCSI] scsi_debug: fix incorrectly nested kmap_atomic()
  [SCSI] scsi_debug: fix invalid address passed to kunmap_atomic()
  [SCSI] mpt3sas: Bump driver version to v02.100.00.00
  [SCSI] mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed
  ...
2013-07-13 17:41:21 -07:00
Akinobu Mita a451751172 scsi_debug: fix do_device_access() with wrap around range
do_device_access() is a function that abstracts copying SG list from/to
ramdisk storage (fake_storep).

It must deal with the ranges exceeding actual fake_storep size, because
such ranges are valid if virtual_gb is set greater than zero, and they
should be treated as fake_storep is repeatedly mirrored up to virtual
size.

Unfortunately, it can't deal with the range which wraps around the end of
fake_storep.  A wrap around range is copied by two
sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't
copy from/to in the middle of SG list, therefore the second call can't
copy correctly.

This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to
the middle of SG list.

This also simplifies the assignment of sdb->resid in
fill_from_dev_buffer().  Because fill_from_dev_buffer() is now only called
once per command execution cycle.  So it is not necessary to take care to
decrease sdb->resid if fill_from_dev_buffer() is called more than once.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:30 -07:00
Akinobu Mita beb40ea42b [SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write
In order to reduce code duplication between prot_verify_read() and
prot_verify_write(), this moves common code into the new functions.

[jejb: fix unitialised variable warning]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 12:13:42 +01:00
Akinobu Mita e18d8bea33 [SCSI] scsi_debug: simplify offset calculation for dif_storep
dif_storep is declared as pointer to unsigned char type.  But it is
actually used to store vmalloced array of struct sd_dif_tuple.

This changes the type of dif_storep to the pointer to struct sd_dif_tuple.
It simplifies offset calculation for dif_storep and enables to remove
hardcoded size of struct sd_dif_tuple.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 09:25:35 +01:00
Akinobu Mita e9926b4376 [SCSI] scsi_debug: invalidate protection info for unmapped region
When UNMAP command is issued with the data integrity support enabled,
the protection info for the unmapped region is remain unchanged.
So READ command for the region later on causes data integrity failure.

This fixes it by invalidating protection info for the unmapped region
by filling with 0xff pattern.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 09:24:25 +01:00
Akinobu Mita 7cb69d0397 [SCSI] scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1
The protection info dif_storep is allocated only when parameter dif is
not zero.  But it will be accessed when reading or writing to the storage
installed with parameter dix is not zero.

So kernel crashes if scsi_debug module is loaded with parameters dix=1 and
dif=0.

This fixes it by making dif_storep available if parameter dix is not zero
instead of checking if parameter dif is not zero.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 09:23:04 +01:00
Akinobu Mita fc3fc352b6 [SCSI] scsi_debug: fix incorrectly nested kmap_atomic()
In the function prot_verify_write(), kmap_atomic()/kunmap_atomic() for
data page and kmap_atomic()/kunmap_atomic() for protection information
page are not nested each other.

It worked perfectly before commit 3e4d3af501
("mm: stack based kmap_atomic()").  Because the kmap_atomic slot KM_IRQ0
was used for data page and the slot KM_IRQ1 was used for protection page.

But KM_types are gone and kmap_atomic() is using stack based implementation.
So two different kmap_atomic() usages must be strictly nested now.

This change ensures kmap_atomic() usage is strictly nested.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 09:21:38 +01:00
Akinobu Mita 518d9df871 [SCSI] scsi_debug: fix invalid address passed to kunmap_atomic()
In the function prot_verify_write(), the kmap address 'daddr' is
incremented in the loop for each data page.  Finally 'daddr' reaches
the next page boundary in the end of the loop, and the invalid address
is passed to kunmap_atomic().

Fix the issue by not incrementing 'daddr' in the loop and offsetting it
by the loop counter on demand.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 09:17:50 +01:00
James Bottomley 832e77bc11 Merge branch 'misc' into for-linus
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:53:40 -07:00
Akinobu Mita b90ebc3d5c [SCSI] scsi_debug: fix logical block provisioning support
provisioning map (map_storep) is a bitmap accessed by bitops.

So the allocation size should be a multiple of sizeof(unsigned long) and
also the bitmap should be cleared by using bitmap_clear() instead of
memset().

Otherwise it will cause problem on big-endian architecture if the number of
bits is not a multiple of BITS_PER_LONG.

I tried testing the logical block provisioning support in scsi_debug,
but it didn't work as I expected.

For example, load scsi_debug module with UNMAP command supported
and fill the storage with random data.

        # modprobe scsi_debug lbpu=1
        # dd if=/dev/urandom of=/dev/sdb

Then, try to unmap LBA 0, but Get LBA status reports:

        # sg_unmap --lba=0 --num=1 /dev/sdb
        # sg_get_lba_status --lba=0 /dev/sdb
        descriptor LBA: 0x0000000000000000  blocks: 16384  mapped

This is unexpected result.  Because UNMAP command to LBA 0 finished
without any errors, but Get LBA status shows that LBA 0 is still mapped.

This problem is due to the wrong translation between LBA and index of
provisioning map.  Fix it by using correct translation functions.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 15:45:56 -07:00
Akinobu Mita cc34a8e663 [SCSI] scsi_debug: clear correct memory region when LBPRZ is enabled
The function unmap_region() clears memory region specified as the logical
block address and the number of logical blocks in ramdisk storage
(fake_storep) if lbpu and lbprz module parameters are enabled.

In the while loop of unmap_region(), it advances optimal unmap granularity
in logical blocks.  But it only clears one logical block at LBA 'block' per
loop iteration.  And furthermore, the 'block' is not pointing to a logical
block address which should be cleared, it is a index of probisioning map
(map_storep).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 15:40:41 -07:00
Akinobu Mita ac17078ae6 [SCSI] scsi_debug: prohibit scsi_debug_unmap_granularity == scsi_debug_unmap_alignment
scsi_debug prohibits setting scsi_debug_unmap_alignment to be greater
than scsi_debug_unmap_granularity.  But setting them to be the same value
is not prohibited.  In this case, the only difference with
scsi_debug_unmap_alignment == 0 is the logical blocks from 0 to
scsi_debug_unmap_alignment - 1 cannot be unmapped.  But the difference is
not properly handled in the current code.

So this prohibits such unusual setting.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 15:39:54 -07:00
Akinobu Mita 9ed8d3dc5b [SCSI] scsi_debug: call map_region() and unmap_region() only when needed
If the logical block provisioning is not enabled, map_region() and
unmap_region() have no effect and they don't need to be called.

So this makes map_region() and unmap_region() to be called only
when scsi_debug_lbp() returns true, i.e. logical block provisioning is
enabled.

While I'm at it, this also removes meaningless non-zero check for
scsi_debug_unmap_granularity.

Because scsi_debug_unmap_granularity cannot be zero with usual setting:
scsi_debug_unmap_granularity is 1 by default, and it can be changed to
zero with explicit module parameter setting only when the logical block
provisioning is disabled.  But it is only meaningful module parameter
when the logical block provisioning is enabled.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 15:39:04 -07:00
Al Viro c8ed555aba scsi_debug: switch to ->show_info()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:18 -04:00
Lukas Czerner bc977749e9 [SCSI] scsi_debug: Fix off-by-one bug when unmapping region
Currently it is possible to unmap one more block than user requested to
due to the off-by-one error in unmap_region(). This is probably due to
the fact that the end variable despite its name actually points to the
last block to unmap + 1. However in the condition it is handled as the
last block of the region to unmap.

The bug was not previously spotted probably due to the fact that the
region was not zeroed, which has changed with commit
be1dd78de5. With that commit we were able
to corrupt the ext4 file system on 256M scsi_debug device with LBPRZ
enabled using fstrim.

Since the 'end' semantic is the same in several functions there this
commit just fixes the condition to use the 'end' variable correctly in
that context.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09 12:23:11 +01:00
Martin Pitt d986788b26 [SCSI] scsi_debug: Add "removable" parameter
Add "removable" module parameter to set the "removable" attribute of any
subsequently created debug block device. It is a writable driver option, so
that you can switch between removable and "fixed" media block devices in
between the add_host calls.

This is useful for being able to test the different behaviour/required
privileges in e. g. the udisks test suite.

Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24 12:11:05 +04:00
Linus Torvalds a75ee6ecd4 SCSI updates on 20120331
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPdrIWAAoJEDeqqVYsXL0Mny4IAMTzXGOXCykpWhdIe2R8w0Ys
 eIoTJhBKoQWnLTV8cOODtwmtZcoQLeXkZmizZiAJvX6O1tOgueg+W4AFa9grxXGI
 O0d1bSb2ardzU7VZrZSY60Hd4bylMwn4Xv/0dRrQMwTJO0LEeGWsJPV2+2BuXwMB
 lGCNB67oUBXgMOI1jUZQRwx/mBzQ3e/gINjnpZTNKHia7YkX/yVTFISq7htgfDN7
 1wRGxymbHtVap3NbtUO96BUUndAiF5vom+4WNvaQUyPrCc6aoGWjv+J9DQXY/zgv
 AYjujAluK396D6YncGFAWBzYOg9WFbq54v0PRUanjcTTAu5ILs2BxqWdhmnvl14=
 =IH8T
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

Pull SCSI updates from James Bottomley:
 "This is primarily another round of driver updates (lpfc, bfa, fcoe,
  ipr) plus a new ufshcd driver.  There shouldn't be anything
  controversial in here (The final deletion of scsi proc_ops which
  caused some build breakage has been held over until the next merge
  window to give us more time to stabilise it).

  I'm afraid, with me moving continents at exactly the wrong time,
  anything submitted after the merge window opened has been held over to
  the next merge window."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits)
  [SCSI] ipr: Driver version 2.5.3
  [SCSI] ipr: Increase alignment boundary of command blocks
  [SCSI] ipr: Increase max concurrent oustanding commands
  [SCSI] ipr: Remove unnecessary memory barriers
  [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters
  [SCSI] ipr: Fix target id allocation re-use problem
  [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision
  [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up
  [SCSI] bfa: Update the driver version to 3.0.23.0
  [SCSI] bfa: BSG and User interface fixes.
  [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario.
  [SCSI] bfa: Move service parameter programming logic into firmware.
  [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.
  [SCSI] bfa: Flash controller IOC pll init fixes.
  [SCSI] bfa: Serialize the IOC hw semaphore unlock logic.
  [SCSI] bfa: Modify ISR to process pending completions
  [SCSI] bfa: Add fc host issue lip support
  [SCSI] mpt2sas: remove extraneous sas_log_info messages
  [SCSI] libfc: fcoe_transport_create fails in single-CPU environment
  [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]
  ...
2012-03-31 13:31:23 -07:00
Martin K. Petersen 3f0bc3b331 [SCSI] scsi_debug: Fix incorrect page length in logical block provisioning VPD
The page length for the 0xb2 VPD page is defined to be 4 bytes when no
provisioning descriptors are provided (DP=0).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27 08:26:36 +01:00
Eric Sandeen be1dd78de5 [SCSI] scsi_debug: add LBPRZ support
Add LBPRZ support to scsi_debug; i.e. read zeros for
unmapped blocks.

Rather than checking for unmapped blocks at
read time, this just zeroes them on the backing store
at unmap time so it behaves the same way.

This also adds a module parameter to disable it.

lbprz, "unmapped blocks return 0 on read (def=1)"

[jejb: fix whitespace errors]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27 08:26:36 +01:00
Linus Torvalds 424a6f6ef9 SCSI updates on 20120319
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPZxSnAAoJEDeqqVYsXL0M0Y4IAMX0vrTVZbg6psA5/gMcWGRP
 CkFXEQ8n0PL2SCaj6BoDqamJFe5Nc7dnqxM0fGawB4S9vr3rHhiOlwO+NbV9zFYC
 2skBTpeL3sjgtN/jTBdfeeAa7xTYpu/XGyei0NS1A5c2AyMVXV0uYV2s4VNZxe44
 tVIn1OEzM2giZ9EB1OZslDMrg5XXm3MBIUECP0LbWUhBm/35caSFKzMXRwhh7WiK
 +AVmc2AZYtdEwuknDyiH7KlsaoB3vGL9pPrAUJzIgEhy2pOo2A7W72HfA4Fj+y6a
 uF9HBS5zciMp1+sGWry62AjNbWgin9BRlozBEO/lJhIfMGDV1nXEIJsOkOgkdoE=
 =1TxB
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

SCSI updates from James Bottomley:
 "The update includes the usual assortment of driver updates (lpfc,
  qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge
  amount of infrastructure work in the SAS library and transport class
  as well as an iSCSI update.  There's also a new SCSI based virtio
  driver."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits)
  [SCSI] qla4xxx: Update driver version to 5.02.00-k15
  [SCSI] qla4xxx: trivial cleanup
  [SCSI] qla4xxx: Fix sparse warning
  [SCSI] qla4xxx: Add support for multiple session per host.
  [SCSI] qla4xxx: Export CHAP index as sysfs attribute
  [SCSI] scsi_transport: Export CHAP index as sysfs attribute
  [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry
  [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry
  [SCSI] pm8001: fix endian issue with code optimization.
  [SCSI] pm8001: Fix possible racing condition.
  [SCSI] pm8001: Fix bogus interrupt state flag issue.
  [SCSI] ipr: update PCI ID definitions for new adapters
  [SCSI] qla2xxx: handle default case in qla2x00_request_firmware()
  [SCSI] isci: improvements in driver unloading routine
  [SCSI] isci: improve phy event warnings
  [SCSI] isci: debug, provide state-enum-to-string conversions
  [SCSI] scsi_transport_sas: 'enable' phys on reset
  [SCSI] libsas: don't recover end devices attached to disabled phys
  [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata
  [SCSI] libsas: set attached device type and target protocols for local phys
  ...
2012-03-22 12:55:29 -07:00
Cong Wang 77dfce076c scsi: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:19 +08:00
Martin K. Petersen 18a4d0a22e [SCSI] Handle disk devices which can not process medium access commands
We have experienced several devices which fail in a fashion we do not
currently handle gracefully in SCSI. After a failure these devices will
respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.)
but any command accessing the storage medium will time out.

The following patch adds an callback that can be used by upper level
drivers to inspect the results of an error handling command. This in
turn has been used to implement additional checking in the SCSI disk
driver.

If a medium access command fails twice but TEST UNIT READY succeeds both
times in the subsequent error handling we will offline the device. The
maximum number of failed commands required to take a device offline can
be tweaked in sysfs.

Also add a new error flag to scsi_debug which allows this scenario to be
easily reproduced.

[jejb: fix up integer parsing to use kstrtouint]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 10:14:52 -06:00
Douglas Gilbert de13e9654e [SCSI] scsi_debug: GET LBA STATUS response length correction
The SCSI GET LBA STATUS command was introduced in SBC-3 revision
20 in September 2009. At that time the Parameter Data Length
field in the response had an associated byte offset of 8.

Then in SBC-3 revision 25 (October 2010) that byte offset was
changed to 4. The sg_get_lba_status utility in sg3_utils version
1.33 (released earlier today) has been changed to calculate
the newer response length. However the implementation of
GET LBA STATUS command in the scsi_debug driver still uses the
original byte offset.

modify the Parameter Data Length field value in the GET LBA STATUS command
response to comply with the change in SBC-3 revision 25

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:08:57 -06:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds c55d267de2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
  [SCSI] scsi_dh_rdac: Add MD36xxf into device list
  [SCSI] scsi_debug: add consecutive medium errors
  [SCSI] libsas: fix ata list corruption issue
  [SCSI] hpsa: export resettable host attribute
  [SCSI] hpsa: move device attributes to avoid forward declarations
  [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
  [SCSI] sd: Logical Block Provisioning update
  [SCSI] Include protection operation in SCSI command trace
  [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
  [SCSI] target: Fix volume size misreporting for volumes > 2TB
  [SCSI] bnx2fc: Broadcom FCoE offload driver
  [SCSI] fcoe: fix broken fcoe interface reset
  [SCSI] fcoe: precedence bug in fcoe_filter_frames()
  [SCSI] libfcoe: Remove stale fcoe-netdev entries
  [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
  [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
  [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
  [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
  [SCSI] libfc: Fixing a memory leak when destroying an interface
  [SCSI] megaraid_sas: Version and Changelog update
  ...

Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17 17:54:40 -07:00
Douglas Gilbert 32f7ef7358 [SCSI] scsi_debug: add consecutive medium errors
A useful test case for error recovery is multiple,
consecutive medium errors. When scsi_debug is started
with "opts=2" a MEDIUM ERROR is generated when block
0x1234 (4660) is read. The patch extends that to
10 consecutive blocks from 0x1234 (i.e. blocks 4660 to
4669 inclusive).

[0:0:0:0]  disk  ATA    INTEL SSD  2CV1 /dev/sda /dev/sg0 80.0GB
[10:0:0:0] disk  Linux  scsi_debug 0004 /dev/sdb /dev/sg1 1.09TB

Output file not specified so no copy, just reading input
 >> unrecovered read error at blk=4660, substitute zeros
...
 >> unrecovered read error at blk=4669, substitute zeros
4670+10 records in
0+0 records out
10 unrecovered read errors
lowest unrecovered read lba=4660, highest unrecovered lba=4669
time to read data: 0.047943 secs at 49.87 MB/sec

BTW Change /dev/sg1 (bsg device works just as well) to
/dev/sdb to see why, with faulty media, you do not want
to use the block layer interface. Reason: time block
layer takes to do useless retries and collateral damage
to data in its 4 KB blocks (O_DIRECT mitigates the
latter).

ChangeLog:
    - extend opts=2 medium error generation at block
      0x1234 to 10 consecutive blocks (i.e. blocks
      0x1234 to 0x123d).

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:59:57 -05:00
Martin K. Petersen 5b94e23292 [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
Update scsi_debug to support the Logical Block Provisioning commands and
bits as defined in SBC3r26. The old tp* parameters have been
transitioned to the new lbp* scheme found in the draft standard.

The old tpu option to enable UNMAP is now called lbpu. tpws to signal
support for WRITE SAME(16) with the UNMAP bit set is now lbpws. Support
for WRITE SAME(10) with the UNMAP bit set is also available using the
lpuws10 parameter.

Limiting the maximum number of blocks per WRITE SAME command has been
implemented and is available via the write_same_length module parameter.

As part of the renaming process the parameter lists have been sorted
alphabetically (request from Doug).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:38:44 -05:00
Darrick J. Wong a361cc0025 [SCSI] scsi_debug: Fix 32-bit overflow in do_device_access causing memory corruption
If I create a scsi_debug device that is larger than 4GB, the multiplication of
(block * scsi_debug_sector_size) can produce a 64-bit value.  Unfortunately,
the compiler sees two 32-bit quantities and performs a 32-bit multiplication,
thus truncating the bits above 2^32.  This causes the wrong memory location to
be read or written.  Change block and rest to be unsigned long long.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12 11:21:56 -06:00
Douglas Gilbert a87e3a67d5 [SCSI] scsi_debug: set resid to indicate no data-in when medium error
set resid to the requested data-in length when a MEDIUM ERROR is
simulated. This implies no valid data is returned in the data-in
buffer

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-22 23:26:49 -06:00
Jeff Garzik f281233d3e SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 13:33:23 -08:00
Nicholas Bellinger 9b90677956 [SCSI] scsi_debug: Convert to use root_device_register() and root_device_unregister()
This patch updates the scsi_debug virtual LLD to use
root_device_register() and root_device_unregister() from
include/linux/device.h instead of device_register() and
device_unregister() respectively within scsi_debug_init() and
scsi_debug_exit() This simply involved converting the static struct
device pseudo_primary into a pointer that is setup by the call to
root_device_register().

This patch also contains the correct IS_ERR() conditional check of
root_device_register() from within scsi_debug_init().

Thanks to Richard Sharpe and Dmitry Torokhov for their help with this
item.

Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-16 22:54:08 -04:00
Martin K. Petersen 6014759c92 [SCSI] scsi_debug: Update thin provisioning support
The previous thin provisioning support was not very user friendly
because it depended on all the relevant options being set on the command
line.

Implement support for the Thin Provisioning VPD page from SBC3 r24 and
add module options for TPU (UNMAP) and TPWS (WRITE SAME (16) with UNMAP
bit).  This allows us to have sane default and to enable thin
provisioning with a simple tpu=1 or tpws=1 on the command line depending
on whether we want UNMAP or WRITE SAME behavior.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-09 15:34:40 -05:00
FUJITA Tomonori 9ab98f57b3 [SCSI] scsi_debug: fix map_region and unmap_region oops
map_region and unmap_region could access to invalid memory area since
they don't check the size boundary.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:03:55 -05:00
James Bottomley 95bb335c0e [SCSI] Merge scsi-misc-2.6 into scsi-rc-fixes-2.6
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-18 10:37:41 -04:00
Douglas Gilbert 5447ed6c96 [SCSI] scsi_debug: virtual_gb ignores sector_size
In the scsi_debug driver, the virtual_gb option ignores the
sector_size, implicitly assuming that is 512 bytes.  So if
'virtual_gb=1 sector_size=4096' the result is an 8 GB (virtual) disk.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-02 11:18:55 -04:00
Martin K. Petersen e308b3d19d [SCSI] scsi_debug: Block Limits VPD page fixes
Add a few clarifying comments in the B0 page function and allow the
optimal transfer length field to be specified on the command line using
opt_blks=N.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-30 12:45:28 -05:00
Douglas Gilbert 78d4e5a07d [SCSI] scsi_debug: add max_queue + no_uld parameters
While testing the midlevel q_at_head and q_at_tail
patch for sg and the block SG_IO ioctl I found it
useful to reduce the queuing within the scsi_debug
driver. The reason is that the midlevel queue only
comes into play when the corresponding LLD queue
is full.

It is also useful when testing to be confident that
your program is the only thing issuing commands
to the (virtual) scsi_debug device. The no_uld=1
parameter will stop a scsi_debug virtual disk
appearing as /dev/sd* .

Changelog:
   - add max_queue parameter to reduce the number
     of queued commands the driver will accept.
     This parameter can be changed after the driver
     is loaded.
   - add no_uld parameter that restricts scsi_debug's
     virtual devices to the sg and bsg drivers
   - correct stale url

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 13:40:38 -05:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Douglas Gilbert 1e49f78505 [SCSI] scsi_debug: fix Thin provisioning support
While testing scsi_debug with these patches I found a
problem with the Block Limits VPD page function. The
length returned by the inquiry_evpd_b0() function was
too short. A patch to fix that and a cosmetic change
(that the form factor of scsi_debug is less than 1.8
inches) is attached.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:49 -06:00
Martin K. Petersen 44d9269481 [SCSI] scsi_debug: Thin provisioning support
This version fixes 64-bit modulo on 32-bit as well as inadvertent map
updates when TP was disabled.

Implement support for thin provisioning in scsi_debug.  No actual memory
de-allocation is taking place.  The intent is to emulate a thinly
provisioned storage device, not to be one.

There are four new module options:

 - unmap_granularity specifies the granularity at which to track mapped
   blocks (specified in number of logical blocks).  2048 (1 MB) is a
   realistic value for disk arrays although some may have a finer
   granularity.

 - unmap_alignment specifies the first LBA which is naturally aligned on
   an unmap_granularity boundary.

 - unmap_max_desc specifies the maximum number of ranges that can be
   unmapped using one UNMAP command.  If this is 0, only WRITE SAME is
   supported and UNMAP will cause a check condition.

 - unmap_max_blocks specifies the maximum number of blocks that can be
   unmapped using a single UNMAP command.  Default is 0xffffffff.

These parameters are reported in the new and extended block limits VPD.

If unmap_granularity is specified the device is tagged as thin
provisioning capable in READ CAPACITY(16).  A bitmap is allocated to
track whether blocks are mapped or not.  A WRITE request will cause a
block to be mapped.  So will WRITE SAME unless the UNMAP bit is set.

Blocks can be unmapped using either WRITE SAME or UNMAP.  No accounting
is done to track partial blocks.  This means that only whole blocks will
be marked free.  This is how the array people tell me their firmwares
work.

GET LBA STATUS is also supported.  This command reports whether a block
is mapped or not, and how long the adjoining mapped/unmapped extent is.

The block allocation bitmap can also be viewed from user space via:

	/sys/bus/pseudo/drivers/scsi_debug/map

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:16 -06:00
Martin K. Petersen 395cef030c [SCSI] scsi_debug: Implement support for DIF Type 2
Add support for 32-byte READ/WRITE as well as DIF Type 2 protection.

Reject protected 10/12/16 byte READ/WRITE commands when Type 2 is
enabled.

Verify Type 2 reference tag according to Expected Initial LBA in 32-byte
CDB.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:47:17 -05:00
Martin K. Petersen ea61fca58c scsi_debug: Add support for physical block exponent and alignment
This patch adds support for setting the physical block exponent and
lowest aligned LBA in the READ CAPACITY(16) response.

The B0 VPD page is adjusted accordingly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:03:54 -05:00