It is more clear to use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs file
operation rather than DEFINE_SIMPLE_ATTRIBUTE.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
As the "else if" and "else" branch body are identical the condition
has no effect. So drop the "else if" condition.
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
use true/false for bool type variables assignment.
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
use true/false on bool type variable assignment.
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
As the "else if" and "else" branch body are identical the condition
has no effect. So drop the "else if" condition.
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The checks to see if swing_table->n or swing_table->p are null are
redundant since n and p are arrays and can never be null if
swing_table is non-null. I believe these are redundant checks
and can be safely removed, especially the checks implies that these
are not arrays which can lead to confusion.
Addresses-Coverity: ("Array compared against 0")
Fixes: c97ee3e0be ("rtw88: add power tracking support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The FW info was printed everytime driver is powered on, such as
leaving IDLE state. It will flood the kernel log.
Move the FW info printing to callback when FW is loaded, so
that will only be printed once when device is probed.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The level of cckpd is from 0 to 4, and it is the index of
array pd_lvl[] and cs_lvl[]. However, the length of both arrays
are 4, which is smaller than the possible maximum input index.
Enumerate cck level to make sure the max level will not be wrong
if new level is added in future.
Fixes: 479c4ee931 ("rtw88: add dynamic cck pd mechanism")
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Driver just memset() rx_status to 0 before assigning rate indexes.
And driver could never hit the 'else' because the driver checks
if 'pkt_stat->rate >= DESC_RATEMCS0', so the 'else' statement can
be removed.
Also rearrange the if..else statements because DESC_RATEMCS0 is
actually larger than DESC_RATE1M ~ DESC_RATE54M, move the check
of 'pkt_stat->rate >= DESC_RATEMCS0' to the last to keep an
increasing order.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Use proper struct for BB PG tables.
TODO: we need to find a way to store the tables that have
condition values.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Some of the modules use RFE type 3, add corresponding tables
for them.
Tested-by: G.schlmm <g.schlmm@googlemail.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
sparse warnings:
drivers/net/wireless/realtek/rtw88/rtw8822b.c:1440:6: sparse: sparse:
symbol 'rtw8822b_pwr_track' was not declared. Should it be static?
drivers/net/wireless/realtek/rtw88/rtw8822c.c:1008:6: sparse: sparse:
symbol 'rtw8822c_pwrtrack_init' was not declared. Should it be static?
Fixes: c97ee3e0be ("rtw88: add power tracking support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
sparse warnings:
drivers/net/wireless/realtek/rtw88/rtw8822c.c:2871:6: sparse:
sparse: symbol 'rtw8822c_dpk_cal_coef1' was not declared. Should it be
static?
drivers/net/wireless/realtek/rtw88/rtw8822c.c:3112:6: sparse:
sparse: symbol 'rtw8822c_dpk_track' was not declared. Should it be
static?
Fixes: 5227c2ee45 ("rtw88: 8822c: add SW DPK support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Few fixes on the dmaengine drivers:
- fix in sprd driver for link list and potential memory leak
- tegra transfer failure fix
- imx size check fix for script_number
- xilinx fix for 64bit AXIDMA and control reg update
- qcom bam dma resource leak fix
- cppi slave transfer fix when idle
-----BEGIN PGP SIGNATURE-----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=e87E
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A few fixes to the dmaengine drivers:
- fix in sprd driver for link list and potential memory leak
- tegra transfer failure fix
- imx size check fix for script_number
- xilinx fix for 64bit AXIDMA and control reg update
- qcom bam dma resource leak fix
- cppi slave transfer fix when idle"
* tag 'dmaengine-fix-5.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle
dmaengine: qcom: bam_dma: Fix resource leak
dmaengine: sprd: Fix the possible memory leak issue
dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config
dmaengine: xilinx_dma: Fix 64-bit simple AXIDMA transfer
dmaengine: imx-sdma: fix size check for sdma script_number
dmaengine: tegra210-adma: fix transfer failure
dmaengine: sprd: Fix the link-list pointer register configuration issue
Haiyang Zhang says:
====================
hv_netvsc: fix error handling in netvsc_attach/set_features
The error handling code path in these functions are not correct.
This patch set fixes them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes: 7b2ee50c0c ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an error is returned by rndis_filter_set_offload_params(), we should
still assign the unaffected features to ndev->features. Otherwise, these
features will be missing.
Fixes: d6792a5a07 ("hv_netvsc: Add handler for LRO setting change")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Release resources when attaching to ULD fail. Otherwise, data
mismatch is seen between LLD and ULD later on, which lead to
kernel panic when accessing resources that should not even
exist in the first place.
Fixes: 94cdb8bb99 ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
Control action percpu counters allocation by netlink flag
Currently, significant fraction of CPU time during TC filter allocation
is spent in percpu allocator. Moreover, percpu allocator is protected
with single global mutex which negates any potential to improve its
performance by means of recent developments in TC filter update API that
removed rtnl lock for some Qdiscs and classifiers. In order to
significantly improve filter update rate and reduce memory usage we
would like to allow users to skip percpu counters allocation for
specific action if they don't expect high traffic rate hitting the
action, which is a reasonable expectation for hardware-offloaded setup.
In that case any potential gains to software fast-path performance
gained by usage of percpu-allocated counters compared to regular integer
counters protected by spinlock are not important, but amount of
additional CPU and memory consumed by them is significant.
In order to allow configuring action counters allocation type at
runtime, implement following changes:
- Implement helper functions to update the action counters and use them
in affected actions instead of updating counters directly. This steps
abstracts actions implementation from counter types that are being
used for particular action instance at runtime.
- Modify the new helpers to use percpu counters if they were allocated
during action initialization and use regular counters otherwise.
- Extend action UAPI TCA_ACT space with TCA_ACT_FLAGS field. Add
TCA_ACT_FLAGS_NO_PERCPU_STATS action flag and update
hardware-offloaded actions to not allocate percpu counters when the
flag is set.
With this changes users that prefer action update slow-path speed over
software fast-path speed can dynamically request actions to skip percpu
counters allocation without affecting other users.
Now, lets look at actual performance gains provided by this change.
Simple test is used to measure insertion rate - iproute2 TC is executed
in parallel by xargs in batch mode, its total execution time is measured
by shell builtin "time" command. The command runs 20 concurrent tc
instances, each with its own batch file with 100k rules:
$ time ls add* | xargs -n 1 -P 20 sudo tc -b
Two main rule profiles are tested. First is simple L2 flower classifier
with single gact drop action. The configuration is chosen as worst case
scenario because with single-action rules pressure on percpu allocator
is minimized. Example rule:
filter add dev ens1f0 protocol ip ingress prio 1 handle 1 flower skip_hw
src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 action drop
Second profile is typical real-world scenario that uses flower
classifier with some L2-4 fields and two actions (tunnel_key+mirred).
Example rule:
filter add dev ens1f0_0 protocol ip ingress prio 1 handle 1 flower
skip_hw src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 src_ip
192.168.111.1 dst_ip 192.168.111.2 ip_proto udp dst_port 1 src_port
1 action tunnel_key set id 1 src_ip 2.2.2.2 dst_ip 2.2.2.3 dst_port
4789 action mirred egress redirect dev vxlan1
Profile | percpu | no_percpu | X improvement
| (k rules/sec) | (k rules/sec) |
-------------------+---------------+---------------+---------------
Gact drop | 203 | 259 | 1.28
tunnel_key+mirred | 92 | 204 | 2.22
For simple drop action removing percpu allocation leads to ~25%
insertion rate improvement. Perf profiles highlights the bottlenecks.
Perf profile of run with percpu allocation (gact drop):
+ 89.11% 0.48% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 88.58% 0.04% tc [kernel.vmlinux] [k] do_syscall_64
+ 87.50% 0.04% tc libc-2.29.so [.] __libc_sendmsg
+ 86.96% 0.04% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 86.85% 0.01% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 86.60% 0.05% tc [kernel.vmlinux] [k] sock_sendmsg
+ 86.55% 0.12% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 86.04% 0.13% tc [kernel.vmlinux] [k] netlink_unicast
+ 85.42% 0.03% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 84.68% 0.04% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 84.56% 0.24% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 75.73% 0.65% tc [cls_flower] [k] fl_change
+ 71.30% 0.03% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 71.27% 0.13% tc [kernel.vmlinux] [k] tcf_action_init
+ 71.06% 0.01% tc [kernel.vmlinux] [k] tcf_action_init_1
+ 70.41% 0.04% tc [act_gact] [k] tcf_gact_init
+ 53.59% 1.21% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 52.34% 0.34% tc [kernel.vmlinux] [k] tcf_idr_create
- 51.23% 2.17% tc [kernel.vmlinux] [k] pcpu_alloc
- 49.05% pcpu_alloc
+ 39.35% __mutex_lock.isra.0 4.99% memset_erms
+ 2.16% pcpu_alloc_area
+ 2.17% __libc_sendmsg
+ 45.89% 44.33% tc [kernel.vmlinux] [k] osq_lock
+ 9.94% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 7.76% 0.00% tc [kernel.vmlinux] [k] tcf_idr_insert
+ 6.50% 0.03% tc [kernel.vmlinux] [k] tfilter_notify
+ 6.24% 6.11% tc [kernel.vmlinux] [k] mutex_spin_on_owner
+ 5.73% 5.32% tc [kernel.vmlinux] [k] memset_erms
+ 5.31% 0.18% tc [kernel.vmlinux] [k] tcf_fill_node
Here bottleneck is clearly in pcpu_alloc() function that takes more than
half CPU time, which is mostly wasted busy-waiting for internal percpu
allocator global lock.
With percpu allocation removed (gact drop):
+ 87.50% 0.51% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 86.94% 0.07% tc [kernel.vmlinux] [k] do_syscall_64
+ 85.75% 0.04% tc libc-2.29.so [.] __libc_sendmsg
+ 85.00% 0.07% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 84.84% 0.07% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 84.59% 0.01% tc [kernel.vmlinux] [k] sock_sendmsg
+ 84.58% 0.14% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 83.95% 0.12% tc [kernel.vmlinux] [k] netlink_unicast
+ 83.34% 0.01% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 82.39% 0.12% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 82.16% 0.25% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 75.13% 0.84% tc [cls_flower] [k] fl_change
+ 69.92% 0.05% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 69.87% 0.11% tc [kernel.vmlinux] [k] tcf_action_init
+ 69.61% 0.02% tc [kernel.vmlinux] [k] tcf_action_init_1
- 68.80% 0.10% tc [act_gact] [k] tcf_gact_init
- 68.70% tcf_gact_init
+ 36.08% tcf_idr_check_alloc
+ 31.88% tcf_idr_insert
+ 63.72% 0.58% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 58.80% 56.68% tc [kernel.vmlinux] [k] osq_lock
+ 36.08% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 31.88% 0.01% tc [kernel.vmlinux] [k] tcf_idr_insert
The gact actions (like all other actions types) are inserted in single
idr instance protected by global (per namespace) lock that becomes new
bottleneck with such simple rule profile and prevents achieving 2x+
performance increase that can be expected by looking at profiling data
for insertion action with percpu counter.
Perf profile of run with percpu allocation (tunnel_key+mirred):
+ 91.95% 0.21% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 91.74% 0.06% tc [kernel.vmlinux] [k] do_syscall_64
+ 90.74% 0.01% tc libc-2.29.so [.] __libc_sendmsg
+ 90.52% 0.01% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 90.50% 0.04% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 90.41% 0.02% tc [kernel.vmlinux] [k] sock_sendmsg
+ 90.38% 0.04% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 90.10% 0.06% tc [kernel.vmlinux] [k] netlink_unicast
+ 89.76% 0.01% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 89.28% 0.04% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 89.15% 0.03% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 83.41% 0.33% tc [cls_flower] [k] fl_change
+ 81.17% 0.04% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 81.13% 0.06% tc [kernel.vmlinux] [k] tcf_action_init
+ 81.04% 0.04% tc [kernel.vmlinux] [k] tcf_action_init_1
- 73.59% 2.16% tc [kernel.vmlinux] [k] pcpu_alloc
- 71.42% pcpu_alloc
+ 61.41% __mutex_lock.isra.0 5.02% memset_erms
+ 2.93% pcpu_alloc_area
+ 2.16% __libc_sendmsg
+ 63.58% 0.17% tc [kernel.vmlinux] [k] tcf_idr_create
+ 63.40% 0.60% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 57.85% 56.38% tc [kernel.vmlinux] [k] osq_lock
+ 46.27% 0.13% tc [act_tunnel_key] [k] tunnel_key_init
+ 34.26% 0.02% tc [act_mirred] [k] tcf_mirred_init
+ 10.99% 0.00% tc [kernel.vmlinux] [k] dst_cache_init
+ 5.32% 5.11% tc [kernel.vmlinux] [k] memset_erms
With two times more actions pressure on percpu allocator doubles, so now
it takes ~74% of CPU execution time.
With percpu allocation removed (tunnel_key+mirred):
+ 86.02% 0.50% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 85.51% 0.12% tc [kernel.vmlinux] [k] do_syscall_64
+ 84.40% 0.03% tc libc-2.29.so [.] __libc_sendmsg
+ 83.84% 0.03% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 83.72% 0.01% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 83.56% 0.01% tc [kernel.vmlinux] [k] sock_sendmsg
+ 83.50% 0.08% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 83.02% 0.17% tc [kernel.vmlinux] [k] netlink_unicast
+ 82.48% 0.00% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 81.89% 0.11% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 81.71% 0.25% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 73.99% 0.63% tc [cls_flower] [k] fl_change
+ 69.72% 0.00% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 69.72% 0.09% tc [kernel.vmlinux] [k] tcf_action_init
+ 69.53% 0.05% tc [kernel.vmlinux] [k] tcf_action_init_1
+ 53.08% 0.91% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 45.52% 43.99% tc [kernel.vmlinux] [k] osq_lock
- 36.02% 0.21% tc [act_tunnel_key] [k] tunnel_key_init
- 35.81% tunnel_key_init
+ 15.95% tcf_idr_check_alloc
+ 13.91% tcf_idr_insert
- 4.70% dst_cache_init
+ 4.68% pcpu_alloc
+ 33.22% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 32.34% 0.05% tc [act_mirred] [k] tcf_mirred_init
+ 28.24% 0.01% tc [kernel.vmlinux] [k] tcf_idr_insert
+ 7.79% 0.05% tc [kernel.vmlinux] [k] idr_alloc_u32
+ 7.67% 7.35% tc [kernel.vmlinux] [k] idr_get_free
+ 6.46% 6.22% tc [kernel.vmlinux] [k] mutex_spin_on_owner
+ 5.11% 0.05% tc [kernel.vmlinux] [k] tfilter_notify
With percpu allocation removed insertion rate is increased by ~120%.
Such rule profile scales much better than simple single action because
both types of actions were competing for single lock in percpu
allocator, but not for action idr lock, which is per-action. Note that
percpu allocator is still used by dst_cache in tunnel_key actions and
consumes 4.68% CPU time. Dst_cache seems like good opportunity for
further insertion rate optimization but is not addressed by this change.
Another improvement provided by this change is significantly reduced
memory usage. The test is implemented by sampling "used memory" value
from "vmstat -s" command output. Following table includes memory usage
measurements for same two configurations that were used for measuring
insertion rate:
Profile | Mem per rule | Mem per rule no_percpu | Less memory used
| (KB) | (KB) | (KB)
-------------------+--------------+------------------------+------------------
Gact drop | 3.91 | 2.51 | 1.4
tunnel_key+mirred | 6.73 | 3.91 | 2.8
Results indicate that memory usage of percpu allocator per action is
~1.4 KB. Note that any measurements of percpu allocator memory usage is
inherently tied to particular setup since memory usage is linear to
number of cores in system. It is to be expected that on current top of
the line servers percpu allocator memory usage will be 2-5x more than on
24 CPUs setup that was used for testing.
Setup details: 2x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 32GB memory
Patches applied on top of net-next branch:
commit 2203cbf2c8 (net-next) Author:
Russell King <rmk+kernel@armlinux.org.uk> Date: Tue Oct 15 11:38:39 2019
+0100
net: sfp: move fwnode parsing into sfp-bus layer
Changes V1 -> V2:
- Include memory measurements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic tests to verify action creation with new fast_init flag for all
actions that support the flag.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct tc_action with new "tcfa_flags" field. Set the field in
tcf_idr_create() function and provide new helper
tcf_idr_create_from_flags() that derives 'cpustats' boolean from flags
value. Update individual hardware-offloaded actions init() to pass their
"flags" argument to new helper in order to skip percpu stats allocation
when user requested it through flags.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend TCA_ACT space with nla_bitfield32 flags. Add
TCA_ACT_FLAGS_NO_PERCPU_STATS as the only allowed flag. Parse the flags in
tcf_action_init_1() and pass resulting value as additional argument to
a_o->init().
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify stats update helper functions introduced in previous patches in this
series to fallback to regular tc_action->tcfa_{b|q}stats if cpu stats are
not allocated for the action argument. If regular non-percpu allocated
counters are in use, then obtain action tcfa_lock while modifying them.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous commit introduced helper function for updating qstats and
refactored set of actions to use the helpers, instead of modifying qstats
directly. However, one of the affected action exposes its qstats to
skb_tc_reinsert(), which then modifies it.
Refactor skb_tc_reinsert() to return integer error code and don't increment
overlimit qstats in case of error, and use the returned error code in
tcf_mirred_act() to manually increment the overlimit counter with new
helper function.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract common code that increments cpu_qstats counters into standalone act
API functions. Change hardware offloaded actions that use percpu counter
allocation to use the new functions instead of accessing cpu_qstats
directly.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract common code that increments cpu_bstats counter into standalone act
API function. Change hardware offloaded actions that use percpu counter
allocation to use the new function instead of incrementing cpu_bstats
directly.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all implementations of tc_action_ops->stats_update() callback
have almost exactly the same implementation of counters update
code (besides gact which also updates drop counter). In order to simplify
support for using both percpu-allocated and regular action counters
depending on run-time flag in following patches, extract action counters
update code into standalone function in act API.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri reported crash when JIT is on, but net.core.bpf_jit_kallsyms is off.
bpf_prog_kallsyms_find() was skipping addr->bpf_prog resolution
logic in oops and stack traces. That's incorrect.
It should only skip addr->name resolution for 'cat /proc/kallsyms'.
That's what bpf_jit_kallsyms and bpf_jit_harden protect.
Fixes: 3dec541b2e ("bpf: Add support for BTF pointers to x86 JIT")
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191030233019.1187404-1-ast@kernel.org
Use 'skb_queue_purge()' instead of re-implementing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2019-10-29
This series contains updates to e1000e, igb, ixgbe and i40e drivers.
Sasha adds support for Intel client platforms Comet Lake and Tiger Lake
to the e1000e driver. Also adds a fix for a compiler warning that was
recently introduced, when CONFIG_PM_SLEEP is not defined, so wrap the
code that requires this kernel configuration to be defined.
Alex fixes a potential race condition between network configuration and
power management for e1000e, which is similar to a past issue in the igb
driver. Also provided a bit of code cleanup since the driver no longer
checks for __E1000_DOWN.
Josh Hunt adds UDP segmentation offload support for igb, ixgbe and i40e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It is more clear to use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs file
operation rather than DEFINE_SIMPLE_ATTRIBUTE.
It is detected with the help of coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds glue logic to make pause settings per port
configurable vie ethtool.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This parameter has never been used.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add downshift support for 88E1145, it uses the same downshift
configuration registers as 88E1111.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce says:
====================
ICMP flow improvements
This series improves the flow inspector handling of ICMP packets:
The first two patches just add some comments in the code which would have saved
me a few minutes of time, and refactor a piece of code.
The third one adds to the flow inspector the capability to extract the
Identifier field, if present, so echo requests and replies are classified
as part of the same flow.
The fourth patch uses the function introduced earlier to the bonding driver,
so echo replies can be balanced across bonding slaves.
v1 -> v2:
- remove unused struct members
- add an helper to check for the Id field
- use a local flow_dissector_key in the bonding to avoid
changing behaviour of the flow dissector
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The bonding uses the L4 ports to balance flows between slaves. As the ICMP
protocol has no ports, those packets are sent all to the same device:
# tcpdump -qltnni veth0 ip |sed 's/^/0: /' &
# tcpdump -qltnni veth1 ip |sed 's/^/1: /' &
# ping -qc1 192.168.0.2
1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 315, seq 1, length 64
1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 315, seq 1, length 64
# ping -qc1 192.168.0.2
1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 316, seq 1, length 64
1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 316, seq 1, length 64
# ping -qc1 192.168.0.2
1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 317, seq 1, length 64
1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 317, seq 1, length 64
But some ICMP packets have an Identifier field which is
used to match packets within sessions, let's use this value in the hash
function to balance these packets between bond slaves:
# ping -qc1 192.168.0.2
0: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 303, seq 1, length 64
0: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 303, seq 1, length 64
# ping -qc1 192.168.0.2
1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 304, seq 1, length 64
1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 304, seq 1, length 64
Aso, let's use a flow_dissector_key which defines FLOW_DISSECTOR_KEY_ICMP,
so we can balance pings encapsulated in a tunnel when using mode encap3+4:
# ping -q 192.168.1.2 -c1
0: IP 192.168.0.1 > 192.168.0.2: GREv0, length 102: IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 585, seq 1, length 64
0: IP 192.168.0.2 > 192.168.0.1: GREv0, length 102: IP 192.168.1.2 > 192.168.1.1: ICMP echo reply, id 585, seq 1, length 64
# ping -q 192.168.1.2 -c1
1: IP 192.168.0.1 > 192.168.0.2: GREv0, length 102: IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 586, seq 1, length 64
1: IP 192.168.0.2 > 192.168.0.1: GREv0, length 102: IP 192.168.1.2 > 192.168.1.1: ICMP echo reply, id 586, seq 1, length 64
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ICMP flow dissector currently parses only the Type and Code fields.
Some ICMP packets (echo, timestamp) have a 16 bit Identifier field which
is used to correlate packets.
Add such field in flow_dissector_key_icmp and replace skb_flow_get_be16()
with a more complex function which populate this field.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FLOW_DISSECTOR_KEY_ICMP is checked for every packet, not only ICMP ones.
Even if the test overhead is probably negligible, move the
ICMP dissector code under the big 'switch(ip_proto)' so it gets called
only for ICMP packets.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documents two piece of code which can't be understood at a glance.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a card is disconnected while in use, the system waits until all
opened files are closed then releases the card. This is done via
put_device() of the card device in each device release code.
The recently reported mutex deadlock bug happens in this code path;
snd_timer_close() for the timer device deals with the global
register_mutex and it calls put_device() there. When this timer
device is the last one, the card gets freed and it eventually calls
snd_timer_free(), which has again the protection with the global
register_mutex -- boom.
Basically put_device() call itself is race-free, so a relative simple
workaround is to move this put_device() call out of the mutex. For
achieving that, in this patch, snd_timer_close_locked() got a new
argument to store the card device pointer in return, and each caller
invokes put_device() with the returned object after the mutex unlock.
Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We use io_kiocb->result == -EAGAIN as a way to know if we need to
re-submit a polled request, as -EAGAIN reporting happens out-of-line
for IO submission failures. This field is cleared when we originally
allocate the request, but it isn't reset when we retry the submission
from async context. This can cause issues where we think something
needs a re-issue, but we're really just reading stale data.
Reset ->result whenever we re-prep a request for polled submission.
Cc: stable@vger.kernel.org
Fixes: 9e645e1105 ("io_uring: add support for sqe links")
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current code in ftrace_regs_caller() doesn't assign
%r3 to contain the address of the current frame. This
is hidden if the kernel is compiled with FRAME_POINTER,
but without it just crashes because it tries to dereference
an arbitrary address. Fix this by always setting %r3 to the
current stack frame.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Two pedit tests were failing due to incorrect operation
value in matchPattern, should be 'add' not 'val', so fix it.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We introduce a feature that works like a combination of TCP_NAGLE and
TCP_CORK, but without some of the weaknesses of those. In particular,
we will not observe long delivery delays because of delayed acks, since
the algorithm itself decides if and when acks are to be sent from the
receiving peer.
- The nagle property as such is determined by manipulating a new
'maxnagle' field in struct tipc_sock. If certain conditions are met,
'maxnagle' will define max size of the messages which can be bundled.
If it is set to zero no messages are ever bundled, implying that the
nagle property is disabled.
- A socket with the nagle property enabled enters nagle mode when more
than 4 messages have been sent out without receiving any data message
from the peer.
- A socket leaves nagle mode whenever it receives a data message from
the peer.
In nagle mode, messages smaller than 'maxnagle' are accumulated in the
socket write queue. The last buffer in the queue is marked with a new
'ack_required' bit, which forces the receiving peer to send a CONN_ACK
message back to the sender upon reception.
The accumulated contents of the write queue is transmitted when one of
the following events or conditions occur.
- A CONN_ACK message is received from the peer.
- A data message is received from the peer.
- A SOCK_WAKEUP pseudo message is received from the link level.
- The write queue contains more than 64 1k blocks of data.
- The connection is being shut down.
- There is no CONN_ACK message to expect. I.e., there is currently
no outstanding message where the 'ack_required' bit was set. As a
consequence, the first message added after we enter nagle mode
is always sent directly with this bit set.
This new feature gives a 50-100% improvement of throughput for small
(i.e., less than MTU size) messages, while it might add up to one RTT
to latency time when the socket is in nagle mode.
Acked-by: Ying Xue <ying.xue@windreiver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Update firmware version
This patch set updates the firmware version for Spectrum-1 and enforces
a firmware version for Spectrum-2.
The version adds support for querying port module type. It will be used
by a followup patch set from Jiri to make port split code more generic.
Patch #1 increases the size of an existing register in order to be
compatible with the new firmware version. In the future the firmware
will assign default values to fields not specified by the driver.
Patch #2 temporarily increases the PCI reset timeout for SN3800 systems.
Note that in normal cases the driver will need to wait no longer than 5
seconds for the device to become ready following reset command.
Patch #3 bumps the firmware version for Spectrum-1.
Patch #4 enforces a minimum firmware version for Spectrum-2.
v2:
* Added patch #2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to Spectrum-1, enforce a specific firmware version
for Spectrum-2 so that the driver and firmware are always in sync with
regards to new features.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The version adds support for querying port module type. It will be used
by a followup patch set from Jiri to make port split code more generic.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SN3800 Spectrum-2 based systems have gearboxes that need to be
initialized by the firmware during its initialization flow. In certain
cases, the firmware might need to flash these gearboxes, which is
currently a time-consuming process.
In newer firmware versions, the firmware will not signal to the driver
that it is ready until the gearboxes are flashed. Increase the PCI reset
timeout for these situations. In normal cases, the driver will need to
wait no longer than 5 seconds.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
