Commit Graph

57 Commits

Author SHA1 Message Date
Linus Torvalds c41b3810c0 ACPI and power management fixes for 3.9-rc1
- Fixes for blackfin and microblaze build problems introduced by the
   removal of global pm_idle.  From Lars-Peter Clausen.
 
 - OPP core build fix from Shawn Guo.
 
 - Error condition check fix for the new imx6q-cpufreq driver from
   Wei Yongjun.
 
 - Fix for an AER driver crash related to the lack of APEI
   initialization for acpi=off.  From Rafael J. Wysocki.
 
 - Fix for a USB breakage on Thinkpad T430 related to ACPI power
   resources and PCI wakeup from Rafael J. Wysocki.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKUy/AAoJEKhOf7ml8uNsKskQAIj8rzVUsQcyk77U2NmACLhE
 EGdcxiwLrOc5bR2NEwyF66VN398pYrC2BqtCsj7vE070YEdt8VOcfOQ7FNtp3Z8R
 hgGkpALL6QusV3V+f9rOxberqbU+Ei7XzeZs/74gilTF5+xFDt8Vd+PkJSMzpOug
 BX06ZP5NWALL2qUKbJsz6TTLY1IjkxNrcn4iWMNcCZfCFS4r9KFd9SJhiD9lDY66
 FdE2H69IDWrIEoPuEQHVk79YZu9CKUldMdBAIYfyWGSpxZ5IU/fmvIKlamFgTT7I
 Voz0l69TTSlQYp+6WG7HCla6B371BwYEvZOgjgXNzW+gVPaqj9+wTpOln1GX4oZc
 qBukY59b1NgaJahwX/lHaJZckoF0gcBoqCp3eW3LMPe6tkVk/Kd4cRrTCUXgUMtX
 IHMZc/jkqMQmvEspXqzc+/mZAf9RBzUMG7mgDG4yrxPoSLBUZM1DOWG93lqc6T9u
 nPhvb444GaDRilAc8vW/Bnc5hzaMYGlpoX2MCi0aisevcvD6c5aW4HZ80UirZMPA
 OiOvQJ4vbtdFTrlupv0kBE+fKFXyb+qYtVkrAemcAyvo4KmEbS5n1p79NnI8S4Sp
 DNk/Fh+nUG0t9EKS0bnH/MZYVWqPaTPIq7StUf/iicngLfSIGj4zPflL0GjjC6Wf
 gWqNH0wjit/64gUQsQAN
 =FCbx
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:

 - Fixes for blackfin and microblaze build problems introduced by the
   removal of global pm_idle.  From Lars-Peter Clausen.

 - OPP core build fix from Shawn Guo.

 - Error condition check fix for the new imx6q-cpufreq driver from Wei
   Yongjun.

 - Fix for an AER driver crash related to the lack of APEI
   initialization for acpi=off.  From Rafael J Wysocki.

 - Fix for a USB breakage on Thinkpad T430 related to ACPI power
   resources and PCI wakeup from Rafael J.  Wysocki.

* tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Take unusual configurations of power resources into account
  imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe()
  PM / OPP: fix condition for empty of_init_opp_table()
  ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off
  microblaze idle: Fix compile error
  blackfin idle: Fix compile error
2013-02-25 21:25:17 -08:00
Linus Torvalds 556f12f602 PCI changes for the v3.9 merge window:
Host bridge hotplug
     - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
     - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
     - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
     - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)
 
   PCI device hotplug
     - Clean up cpqphp dead code (Sasha Levin)
     - Disable ARI unless device and upstream bridge support it (Yijing Wang)
     - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)
 
   Power management
     - Don't touch ASPM if disabled (Joe Lawrence)
     - Fix ASPM link state management (Myron Stowe)
 
   Miscellaneous
     - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
     - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
     - Document hotplug resource and MPS parameters (Yijing Wang)
     - Add accessor for PCIe capabilities (Myron Stowe)
     - Drop pciehp suspend/resume messages (Paul Bolle)
     - Make pci_slot built-in only (not a module) (Jiang Liu)
     - Remove unused PCI/ACPI bind ops (Jiang Liu)
     - Removed used pci_root_bus (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKS3hAAoJEFmIoMA60/r8xxoP/j1CS4oCZAnBIVT9fKBkis+/
 CENcfHIUKj6J9iMfJEVvqBELvqaLqtpeNwAGMcGPxV7VuT3K1QumChfaTpRDP0HC
 VDRmrjcmfenEK+YPOG7acsrTyqk2wjpLOyu9MKRxtC5u7tF6376KQpkEFpO4haL4
 eUHTxfE76OkrPBSvx3+PUSf6jqrvrNbjX8K6HdDVVlm3sVAQKmYJU/Wphv2NPOqa
 CAMyCzEGybFjr8hDRwvWgr+06c718GMwQUbnrPdHXAe7lMNMrN/XVBmU9ABN3Aas
 icd3lrDs+yPObgcO/gT8+sAZErCtdJ9zuHGYHdYpRbIQj/5JT4TMk7tw/Bj7vKY9
 Mqmho9GR5YmYTRN9f1r+2n5AQ/KYWXJDrRNOnt5/ys5BOM3vwJ7WJ902zpSwtFQp
 nLX+oD/hLfzpnoIQGDuBAoAXp2Kam3XWRgVvG78buRNrPj+kUzimk14a8qQeY+CB
 El6UKuwi5Uv/qgs1gAqqjmZmsAkon2DnsRZa6Fl8NTkDlis7LY4gp9OU38ySFpB+
 PhCmRyCZmDDqTVtwj6XzR3nPQ5LBSbvsTfgMxYMIUSXHa06tyb2q5p4mEIas0OmU
 RKaP5xQqZuTgD8fbdYrx0xgSrn7JHt/j/X//Qs6unlLCWhlpm3LjJZKxyw2FwBGr
 o4Lci+PiBh3MowCrju9D
 =ER3b
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...
2013-02-25 21:18:18 -08:00
Rafael J. Wysocki 4383822020 Merge branch 'acpi-pm' into fixes
* acpi-pm:
  ACPI / PM: Take unusual configurations of power resources into account
2013-02-23 23:15:43 +01:00
Rafael J. Wysocki b5d667eb39 ACPI / PM: Take unusual configurations of power resources into account
Commit d2e5f0c (ACPI / PCI: Rework the setup and cleanup of device
wakeup) moved the initial disabling of system wakeup for PCI devices
into a place where it can actually work and that exposed a hidden old
issue with crap^Wunusual system designs where the same power
resources are used for both wakeup power and device power control at
run time.

Namely, say there is one power resource such that the ACPI power
state D0 of a PCI device depends on that power resource (i.e. the
device is in D0 when that power resource is "on") and it is used
as a wakeup power resource for the same device.  Then, calling
acpi_pci_sleep_wake(pci_dev, false) for the device in question will
cause the reference counter of that power resource to drop to 0,
which in turn will cause it to be turned off.  As a result, the
device will go into D3cold at that point, although it should have
stayed in D0.

As it turns out, that happens to USB controllers on some laptops
and USB becomes unusable on those machines as a result, which is
a major regression from v3.8.

To fix this problem, (1) increment the reference counters of wakup
power resources during their initialization if they are "on"
initially, (2) prevent acpi_disable_wakeup_device_power() from
decrementing the reference counters of wakeup power resources that
were not enabled for wakeup power previously, and (3) prevent
acpi_enable_wakeup_device_power() from incrementing the reference
counters of wakeup power resources that already are enabled for
wakeup power.

In addition to that, if it is impossible to determine the initial
states of wakeup power resources, avoid enabling wakeup for devices
whose wakeup power depends on those power resources.

Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Tested-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-23 23:15:21 +01:00
Bjorn Helgaas ad06bff31f Merge branch 'pci/jiang-pci_slot-kconfig' into next
* pci/jiang-pci_slot-kconfig:
  ACPI / PCI: Make pci_slot built-in only, not a module
2013-02-15 17:44:01 -07:00
Jiang Liu ab1a2e038f ACPI / PCI: Make pci_slot built-in only, not a module
As discussed in thread at https://patchwork.kernel.org/patch/1946851/,
there's no value in supporting CONFIG_ACPI_PCI_SLOT=m any more.
So change Kconfig and code to only support building pci_slot as
built-in driver.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-15 11:35:05 -07:00
Rafael J. Wysocki 737f1a9f80 ACPI / scan: Make container driver use struct acpi_scan_handler
Make the ACPI container driver use struct acpi_scan_handler for
representing the object used to initialize ACPI containers and remove
the ACPI driver structure used previously and the data structures
created by it, since in fact they were not used for any purpose.

This simplifies the code and reduces the kernel's memory footprint by
avoiding the registration of a struct device_driver object with the
driver core and creation of its sysfs directory which is unnecessary.

In addition to that, make the namespace walk callback used for
installing the notify handlers for ACPI containers more
straightforward.

This change includes fixes from Toshi Kani.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
2013-02-13 13:43:01 +01:00
Rafael J. Wysocki 141a297bd0 ACPI / platform: Use struct acpi_scan_handler for creating devices
Currently, the ACPI namespace scanning code creates platform device
objects for ACPI device nodes whose IDs match the contents of the
acpi_platform_device_ids[] table.  However, this adds a superfluous
special case into acpi_bus_device_attach() and makes it more
difficult to follow than it has to be.  It also will make it more
difficult to implement removal code for those platform device objects
in the future.

For the above reasons, introduce a struct acpi_scan_handler object
for creating platform devices and move the code related to that from
acpi_bus_device_attach() to the .attach() callback of that object.
Also move the acpi_platform_device_ids[] table to acpi_platform.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-01-30 14:27:40 +01:00
Rafael J. Wysocki 4daeaf6837 ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler
Make the ACPI PCI IRQ link driver use struct acpi_scan_handler
for representing the object used to set up ACPI interrupt links and
to remove data structures used for this purpose before unregistering
the corresponding ACPI device nodes.

This simplifies the code slightly and reduces the kernel's memory
footprint by avoiding the registration of a struct device_driver
object with the driver core and creation of its sysfs directory
which is unnecessary.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-30 14:27:37 +01:00
Rafael J. Wysocki 00c43b9682 ACPI / PCI: Make PCI root driver use struct acpi_scan_handler
Make the ACPI PCI root bridge driver use struct acpi_scan_handler
for representing the object used to enumerate the PCI busses under
PCI host bridges found in the ACPI namespace (and to tear down data
structures representing the bus and devices on it before
unregistering the host bridges' ACPI device nodes).

This simplifies the code slightly and reduces the kernel's memory
footprint by avoiding the registration of a struct device_driver
object with the driver core and creation of its sysfs directory
which is unnecessary.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-30 14:27:33 +01:00
Rafael J. Wysocki 8b4e2fa4ff Merge branch 'acpi-lpss' into acpi-cleanup
The following commits depend on the 'acpi-lpss' material.
2013-01-29 13:59:00 +01:00
Yinghai Lu 668192b678 PCI: acpiphp: Move host bridge hotplug to pci_root.c
The acpiphp driver is confusing because it contains partial support for PCI
host bridge hotplug as well as support for hotplug of PCI devices.

This patch moves the host bridge hot-add support to pci_root.c and adds
hot-remove support in pci_root.c.

How to test it: if sci_emu patch is applied, find out root bus number to
ACPI root name mapping from dmesg or /sys.  To remove root bus:

  echo "\_SB.PCIB 3" > /sys/kernel/debug/acpi/sci_notify

To add back root bus:

  echo "\_SB.PCIB 1" > /sys/kernel/debug/acpi/sci_notify

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 14:50:36 -07:00
Rafael J. Wysocki cf860be639 ACPI / scan: Prevent device add uevents from racing with user space
ACPI core adds sysfs device files after the given devices have been
registered with device_register(), which is not appropriate, because
it may lead to race conditions with user space tools using those
files.

Fix the problem by delaying the KOBJ_ADD uevent for ACPI devices
until after all of the devices' sysfs files have been created.

This also fixes a use-after-free in acpi_device_unregister().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24 12:49:49 +01:00
Mika Westerberg e375325ce5 ACPI / platform: create LPSS clocks if Lynxpoint devices are found during scan
Intel Lynxpoint LPSS peripheral drivers depend on LPSS clock tree being
created in order to function properly. The clock tree is exposed as a
platform driver that binds to a device named 'clk-lpt'.

To support this we modify the acpi_create_platform_device() to take one
additional parameter called flags. This is passed from
acpi_platform_device_ids[] array when acpi_create_platform_device() is
called.

We then introduce a new flag ACPI_PLATFORM_CLK which is used to tell
acpi_create_platform_device() to create the platform clocks as well.

Finally we set the ACPI_PLATFORM_CLK flags for all the Lynxpoint LPSS
devices and make sure that when this flag is set we create the
corresponding clock tree platform device.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-23 21:14:22 +01:00
Mika Westerberg 13176bbf18 ACPI: add support for CSRT table
Core System Resources Table (CSRT) is a proprietary ACPI table that
contains resources for certain devices that are not found in the DSDT
table. Typically a shared DMA controller might be found here.

This patch adds support for this table. We go through all entries in the
table and make platform devices of them. The resources from the table are
passed with the platform device.

There is one special resource in the table and it is the DMA request line
base and number of request lines. This information might be needed by the
DMA controller driver as it needs to map the ACPI DMA request line number
to the actual request line understood by the hardware. This range is passed
as IORESOURCE_DMA resource.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-19 22:16:21 +01:00
Rafael J. Wysocki 9ce4e60711 ACPI / PM: Move device power management functions to device_pm.c
Move ACPI device power management functions from drivers/acpi/bus.c
to drivers/acpi/device_pm.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-19 22:09:22 +01:00
Rafael J. Wysocki 0596a52b83 ACPI: Use system level attribute of wakeup power resources
The system level attribute of ACPI power resources is the lowest
system sleep level (S0, S2 etc.) in which the given resource can be
"on" (ACPI 5.0, Section 7.1).  On the other hand, wakeup power
resources have to be "on" for devices depending on them to be able to
signal wakeup.  Therefore devices cannot wake up the system from
sleep states higher than the minimum of the system level attributes
of their wakeup power resources.

Use the wakeup power resources' system level values to get the
deepest system sleep state (highest system sleep level) the given
device can wake up the system from.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:07 +01:00
Rafael J. Wysocki e88c9c603b ACPI: Take power resource initialization errors into account
Some ACPI power resource initialization errors, like memory
allocation errors, are not taken into account appropriately in some
cases, which may lead to a device having an incomplete list of power
resources that one of its power states depends on, for one example.

Rework the power resource initialization and namespace scanning code
so that power resource initialization errors are treated more
seriously.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:07 +01:00
Rafael J. Wysocki ef85bdbec4 ACPI / scan: Consolidate extraction of power resources lists
The lists of ACPI power resources are currently extracted in two
different ways, one for wakeup power resources and one for power
resources that device power states depend on.  There is no reason
why it should be done differently in those two cases, so introduce
a common routine for extracting power resources lists from data
returned by AML, acpi_extract_power_resources(), and make the
namespace scanning code use it for both wakeup and device power
states power resources.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:07 +01:00
Rafael J. Wysocki 0b22452732 ACPI / PM: Take order attribute of power resources into account
ACPI power resources have an order attribute that should be taken
into account when turning them on and off, but it is not used now.

Modify the power resources management code to preserve the
spec-compliant ordering of power resources that power states of
devices depend on (analogous changes will be done separately for
power resources used for wakeup).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:06 +01:00
Rafael J. Wysocki 82c7d5efaa ACPI / scan: Treat power resources in a special way
ACPI power resources need to be treated in a special way by the
namespace scanning code, because they need to be ready to use as
soon as they have been discovered (even before registering ACPI
device nodes using them for power management).

For this reason, it doesn't make sense to separate the preparation
of struct acpi_device objects representing them in the device
hierarchy from the creation of struct acpi_power_resource objects
actually used for power resource manipulation.  Accordingly, it
doesn't make sense to define non-empty .add() and .remove() callbacks
in the power resources "driver" (in fact, it is questionable whether
or not it is useful to register such a "driver" at all).

Rearrange the code in scan.c and power.c so that power resources are
initialized entirely by one routine, acpi_add_power_resource(), that
also prepares their struct acpi_device objects and registers them
with the driver core, telling it to use a special release routine,
acpi_release_power_resource(), for removing objects that represent
power resources from memory.  Make the ACPI namespace scanning code
in scan.c always use acpi_add_power_resource() for preparing and
registering objects that represent power resources.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:05 +01:00
Rafael J. Wysocki bc9b6407bd ACPI / PM: Rework the handling of devices depending on power resources
Commit 0090def6 (ACPI: Add interface to register/unregister device
to/from power resources) made it possible to indicate to the ACPI
core that if the given device depends on any power resources, then
it should be resumed as soon as all of the power resources required
by it to transition to the D0 power state have been turned on.

Unfortunately, however, this was a mistake, because all devices
depending on power resources should be treated this way (i.e. they
should be resumed when all power resources required by their D0
state have been turned on) and for the majority of those devices
the ACPI core can figure out by itself which (physical) devices
depend on what power resources.

For this reason, replace the code added by commit 0090def6 with a
new, much more straightforward, mechanism that will be used
internally by the ACPI core and remove all references to that code
from kernel subsystems using ACPI.

For the cases when there are (physical) devices that should be
resumed whenever a not directly related ACPI device node goes into
D0 as a result of power resources configuration changes, like in
the SATA case, add two new routines, acpi_dev_pm_add_dependent()
and acpi_dev_pm_remove_dependent(), allowing subsystems to manage
such dependencies.  Convert the SATA subsystem to use the new
functions accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:05 +01:00
Rafael J. Wysocki 92ef2a25c7 ACPI: Change the ordering of PCI root bridge driver registrarion
Instead of running acpi_pci_root_init() from a separate subsys
initcall, call it directly from acpi_scan_init() before scanning the
ACPI namespace for the first time, so that the PCI root bridge
driver's .add() routine, acpi_pci_root_start(), is always run
before binding ACPI drivers or attaching "companion" device objects
to struct acpi_device objects below the root bridge's device node in
the ACPI namespace.

The first, simpler reason for doing this is that it makes the
situation during boot more similar to the situation during hotplug,
in which the ACPI PCI root bridge driver is always present.

The second reason is that acpi_pci_root_init() causes struct pci_dev
objects to be created for all PCI devices below the bridge and
these objects may be necessary for whatever is done with the other
ACPI device nodes in that namespace scope.  For example, devices
created by acpi_create_platform_device() sometimes may need to be
added to the device hierarchy as children of PCI bridges.  For this
purpose, however, the struct pci_dev objects representing those
bridges need to exist before the platform devices in question are
registered.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-03 13:09:37 +01:00
Rafael J. Wysocki d4c091f13d Merge branch 'acpi-general'
* acpi-general: (38 commits)
  ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix
  ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device()
  ACPI: Fix logging when no pci_irq is allocated
  ACPI: Update Dock hotplug error messages
  ACPI: Update Container hotplug error messages
  ACPI: Update Memory hotplug error messages
  ACPI: Update CPU hotplug error messages
  ACPI: Add acpi_handle_<level>() interfaces
  ACPI: remove use of __devexit
  ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.
  ACPI / battery: Correct battery capacity values on Thinkpads
  Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info"
  ACPI: create _SUN sysfs file
  ACPI / memhotplug: bind the memory device when the driver is being loaded
  ACPI / memhotplug: don't allow to eject the memory device if it is being used
  ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed
  ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug
  ACPI / memhotplug: deal with eject request in hotplug queue
  ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove()
  ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device
  ...

Conflicts:
	include/linux/acpi.h (two additions at the end of the same file)
2012-11-29 21:43:06 +01:00
Mika Westerberg 91e5687805 ACPI: Add support for platform bus type
With ACPI 5 it is now possible to enumerate traditional SoC
peripherals, like serial bus controllers and slave devices behind
them.  These devices are typically based on IP-blocks used in many
existing SoC platforms and platform drivers for them may already
be present in the kernel tree.

To make driver "porting" more straightforward, add ACPI support to
the platform bus type.  Instead of writing ACPI "glue" drivers for
the existing platform drivers, register the platform bus type with
ACPI to create platform device objects for the drivers and bind the
corresponding ACPI handles to those platform devices.

This should allow us to reuse the existing platform drivers for the
devices in question with the minimum amount of modifications.

This changeset is based on Mika Westerberg's and Mathias Nyman's
work.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:01 +01:00
Feng Tang f351d027ee ACPI / EC: Cleanup the member name for spinlock/mutex in struct
Current member names for mutex/spinlock are a little confusing.

Change the
{
	struct mutex lock;
	spinlock_t curr_lock;
}
to
{
	struct mutex mutex;
	spinlock_t lock;
}

So that the code is cleaner and easier to read.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:15:59 +01:00
Thomas Renninger aecad432fd ACPI: Cleanup custom_method debug stuff
- Move param aml_debug_output to other params into sysfs.c
- Split acpi_debugfs_init to prepare custom_method to be
  an own .config option and driver.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: rui.zhang@intel.com
Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-29 01:50:04 -04:00
Rafael J. Wysocki 4d3fbff26c ACPI: Remove the unused EC sysdev class
The ACPI EC driver defines a sysdev class, but it doesn't use it, so
it can be removed.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-18 18:22:20 -04:00
Len Brown 4263d9a3ae Merge branch 'suspend-ioremap-cache' into release 2011-01-12 16:11:46 -05:00
Rafael J. Wysocki 6fed05c9c9 ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
The recent rework of the NVS saving/restoring code introduced two
build issues for !CONFIG_ACPI, a warning in drivers/acpi/internal.h
and an error in arch/x86/kernel/e820.c.

Fix them by providing suitable static inline definitions of the
relevant functions.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 16:11:30 -05:00
Len Brown d16675e1f1 Merge branch 'suspend-ioremap-cache' into release 2011-01-12 04:56:08 -05:00
Rafael J. Wysocki 53eac700b0 ACPI / PM: Drop acpi_power_nocheck
Since acpi_bus_set_power() should not use __acpi_bus_get_power() to
update the device's device->power.state field before changing its
power state (this may cause device->power.state to be inconsistent
with the device power resources' reference counters), remove this
call from it.  In consequence, the acpi_power_nocheck variable is not
necessary any more, so it can be dropped along with the DMI table
used for setting that variable for HP Pavilion 05.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:45 -05:00
Rafael J. Wysocki ade3e7fef7 ACPI / PM: Add function for device power state initialization
Add function acpi_bus_init_power() for getting the initial power
state of an ACPI device and reference counting its power resources
as appropriate.

Make acpi_bus_get_power_flags() use the new function instead of
acpi_bus_get_power() that updates device->power.state without
reference counting the device's power resources.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:44 -05:00
Rafael J. Wysocki 30d3df41b3 ACPI / PM: Introduce function for refcounting device power resources
Introduce function acpi_power_on_resources() that reference counts
and possibly turns on ACPI power resources for a given device and
a given power state of it.

This function will be used for reference counting device power
resources during initialization.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:44 -05:00
Rafael J. Wysocki 32a00d274e ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
acpi_power_get_inferred_state() should not update
device->power.state behind the back of its caller, so make it return
the state via a pointer instead.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:43 -05:00
Rafael J. Wysocki 976513dbfc PM / ACPI: Move NVS saving and restoring code to drivers/acpi
The saving of the ACPI NVS area during hibernation and suspend and
restoring it during the subsequent resume is entirely specific to
ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS
configuration option which is redundant.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07 00:36:55 -05:00
Len Brown 95ee46aa86 Merge branch 'linus' into release
Conflicts:
	drivers/acpi/debug.c

Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15 01:06:31 -04:00
Zhang Rui 47f5c892b0 ACPI: remove deprecated ACPI procfs I/F
Rmove deprecated ACPI procfs I/F, including
/proc/acpi/debug_layer
/proc/acpi/debug_level
/proc/acpi/info
/proc/acpi/dsdt
/proc/acpi/fadt
/proc/acpi/sleep

because the sysfs I/F is already available
and has been working well for years.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15 00:27:51 -04:00
Zhang Rui 1c8fce27e2 ACPI: introduce drivers/acpi/sysfs.c
Introduce drivers/acpi/sysfs.c.

code for ACPI sysfs I/F, including
#ifdef ACPI_DEBUG
/sys/module/acpi/parameters/debug_layer
/sys/module/acpi/parameters/debug_level
/sys/module/acpi/parameters/trace_method_name
/sys/module/acpi/parameters/trace_debug_layer
/sys/module/acpi/parameters/trace_debug_level
/sys/module/acpi/parameters/trace_state
#endif
/sys/module/acpi/parameters/acpica_version
/sys/firmware/acpi/tables/
/sys/firmware/acpi/interrupts/
is moved to this file.

No function change in this patch.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15 00:26:30 -04:00
Zhang Rui a25ee9200e ACPI: introduce drivers/acpi/debugfs.c
Introduce drivers/acpi/debugfs.c.

Code for ACPI debugfs I/F,
i.e. /sys/kernel/debug/acpi/custom_method,
is moved to this file.

And make ACPI debugfs always built in,
even if CONFIG_ACPI_DEBUG is cleared.

BTW:this adds about 400bytes code to ACPI, when
CONFIG_ACPI_DEBUG is cleared.

[uaccess.h build fix from Andrew Morton <akpm@linux-foundation.org>]

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14 23:02:00 -04:00
Thomas Renninger 1195a09816 ACPI: Provide /sys/kernel/debug/ec/...
This patch provides the same information through debugfs, which previously was
provided through /proc/acpi/embedded_controller/*/info

This is the gpe the EC is connected to and whether the global lock
gets used.
The io ports used are added to /proc/ioports in another patch.
Beside the fact that /proc/acpi is deprecated for quite some time,
this info is not needed for applications and thus can be moved
to debugfs instead of a public interface like /sys.

Signed-off-by: Thomas Renninger <trenn@suse.de>

CC: Alexey Starikovskiy <astarikovskiy@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: linux-kernel@vger.kernel.org
CC: linux-acpi@vger.kernel.org
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: platform-driver-x86@vger.kernel.org
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03 09:49:08 -04:00
Rafael J. Wysocki fe955682d2 ACPI / EC / PM: Fix names of functions that block/unblock EC transactions
The names of the functions used for blocking/unblocking EC
transactions during suspend/hibernation suggest that the transactions
are suspended and resumed by them, while in fact they are disabled
and enabled.  Rename the functions (and the flag used by them) to
better reflect what they really do.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28 23:36:06 -04:00
Rafael J. Wysocki d5a64513c6 ACPI / EC / PM: Fix race between EC transactions and system suspend
There still is a race that may result in suspending the system in
the middle of an EC transaction in progress, which leads to problems
(like the kernel thinking that the ACPI global lock is held during
resume while in fact it's not).

To remove the race condition, modify the ACPI platform suspend and
hibernate callbacks so that EC transactions are blocked right after
executing the _PTS global control method and are allowed to happen
again right after the low-level wakeup.

Introduce acpi_pm_freeze() that will disable GPEs, wait until the
event queues are empty and block EC transactions.  Use it wherever
GPEs are disabled in preparation for switching local interrupts off.
Introduce acpi_pm_thaw() that will allow EC transactions to happen
again and enable runtime GPEs.  Use it to balance acpi_pm_freeze()
wherever necessary.

In addition to that use acpi_ec_resume_transactions_early() to
unblock EC transactions as early as reasonably possible during
resume.  Also unblock EC transactions in acpi_hibernation_finish()
and in the analogous suspend routine to make sure that the EC
transactions are enabled in all error paths.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=14668

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-28 23:35:55 -04:00
Len Brown ec28dcc6b4 Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release 2010-03-14 21:30:17 -04:00
Rafael J. Wysocki f6bb13aa1e ACPI / EC / PM: Close race between EC and resume from hibernation
There is a race between resume from hibernation and the EC driver
that may result in restoring the hibernation image in the middle of
an EC transaction in progress, which in turn may lead to
unpredictable behavior of the platform.

To remove that race condition, add a helpers for suspending and
resuming EC transactions in a safe way to be executed by the ACPI
platform hibernate pre-restore and restore cleanup callbacks.

http://bugzilla.kernel.org/show_bug.cgi?id=14668

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-08 14:15:51 -05:00
Rafael J. Wysocki b67ea76172 PCI / ACPI / PM: Platform support for PCI PME wake-up
Although the majority of PCI devices can generate PMEs that in
principle may be used to wake up devices suspended at run time,
platform support is generally necessary to convert PMEs into wake-up
events that can be delivered to the kernel.  If ACPI is used for this
purpose, PME signals generated by a PCI device will trigger the ACPI
GPE associated with the device to generate an ACPI wake-up event that
we can set up a handler for, provided that everything is configured
correctly.

Unfortunately, the subset of PCI devices that have GPEs associated
with them is quite limited.  The devices without dedicated GPEs have
to rely on the GPEs associated with other devices (in the majority of
cases their upstream bridges and, possibly, the root bridge) to
generate ACPI wake-up events in response to PME signals from them.

Add ACPI platform support for PCI PME wake-up:
o Add a framework making is possible to use ACPI system notify
  handlers for run-time PM.
o Add new PCI platform callback ->run_wake() to struct
  pci_platform_pm_ops allowing us to enable/disable the platform to
  generate wake-up events for given device.  Implemet this callback
  for the ACPI platform.
o Define ACPI wake-up handlers for PCI devices and PCI root buses and
  make the PCI-ACPI binding code register wake-up notifiers for all
  PCI devices present in the ACPI tables.
o Add function pci_dev_run_wake() which can be used by PCI drivers to
  check if given device is capable of generating wake-up events at
  run time.

Developed in cooperation with Matthew Garrett <mjg@redhat.com>.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:21:02 -08:00
Alex Chiang 78f1699659 ACPI: processor: call _PDC early
We discovered that at least one machine (HP Envy), methods in the DSDT
attempt to call external methods defined in a dynamically loaded SSDT.

Unfortunately, the DSDT methods we are trying to call are part of the
EC initialization, which happens very early, and the the dynamic SSDT
is only loaded when a processor _PDC method runs much later.

This results in namespace lookup errors for the (as of yet) undefined
methods.

Since Windows doesn't have any issues with this machine, we take it
as a hint that they must be evaluating _PDC much earlier than we are.

Thus, the proper thing for Linux to do should be to match the Windows
implementation more closely.

Provide a mechanism to call _PDC before we enable the EC. Doing so loads
the dynamic tables, and allows the EC to be enabled correctly.

The ACPI processor driver will still evaluate _PDC in its .add() method
to cover the hotplug case.

Resolves: http://bugzilla.kernel.org/show_bug.cgi?id=14824

Cc: ming.m.lin@intel.com
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:08 -05:00
Len Brown a192a9580b ACPI: Move definition of PREFIX from acpi_bus.h to internal..h
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:27 -04:00
Bjorn Helgaas 201b8c655f ACPI: call acpi_wakeup_device_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_wakeup_device_init() directly.
Previously, acpi_wakeup_device_init() was a late_initcall (sequence 7).

acpi_wakeup_device_init() depends on acpi_wakeup_device_list, which
is populated when ACPI devices are enumerated by acpi_init() ->
acpi_scan_init().  Using late_initcall is certainly enough to make
sure acpi_wakeup_device_list is populated, but it is more than
necessary.  We can just as easily call acpi_wakeup_device_init()
directly from acpi_init(), which avoids the initcall magic.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:31 -04:00
Bjorn Helgaas 9cee43e079 ACPI: call acpi_sleep_proc_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_sleep_proc_init() directly.
Previously, acpi_sleep_proc_init() was a late_initcall (sequence 7),
apparently to make sure that the /proc hierarchy already exists:

    2003/02/13 12:38:03-06:00 mochel
    acpi sleep: demote sleep proc file creation.

    - Make acpi_sleep_proc_init() a late_initcall(), and not called from
      acpi_sleep_init(). This guarantees that the acpi proc hierarchy is at
      least there when we create the dang file.

This should no longer be an issue because acpi_bus_init() (called early
in acpi_init()) creates acpi_root_dir (/proc/acpi).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:23 -04:00