Commit Graph

46 Commits

Author SHA1 Message Date
Dan Williams d9ca676bcb atm: correct sysfs 'device' link creation and parent relationships
The ATM subsystem was incorrectly creating the 'device' link for ATM
nodes in sysfs.  This led to incorrect device/parent relationships
exposed by sysfs and udev.  Instead of rolling the 'device' link by hand
in the generic ATM code, pass each ATM driver's bus device down to the
sysfs code and let sysfs do this stuff correctly.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10 15:45:05 -08:00
David Woodhouse 3ce1227c3c solos: Refuse to upgrade firmware with older FPGA. It doesn't work.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-08 12:17:05 -08:00
Jiri Slaby f1ee89d5b0 ATM: solos-pci, remove use after free
Stanse found we do in console_show:
  kfree_skb(skb);
  return skb->len;
which is not good. Fix that by remembering the len and use it in the
function instead.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11 11:05:41 -07:00
David Woodhouse 1f6ea6e511 solos-pci: Fix race condition in tasklet RX handling
We were seeing faults in the solos-pci receive tasklet when packets
arrived for a VCC which was currently being closed:

[18842.727906] EIP: [<e082f490>] br2684_push+0x19/0x234 [br2684] SS:ESP 0068:dfb89d14 

[18845.090712] [<c13ecff3>] ? do_page_fault+0x0/0x2e1 
[18845.120042] [<e082f490>] ? br2684_push+0x19/0x234 [br2684] 
[18845.153530] [<e084fa13>] solos_bh+0x28b/0x7c8 [solos_pci] 
[18845.186488] [<e084f711>] ? solos_irq+0x2d/0x51 [solos_pci] 
[18845.219960] [<c100387b>] ? handle_irq+0x3b/0x48 
[18845.247732] [<c10265cb>] ? irq_exit+0x34/0x57 
[18845.274437] [<c1025720>] tasklet_action+0x42/0x69 
[18845.303247] [<c102643f>] __do_softirq+0x8e/0x129 
[18845.331540] [<c10264ff>] do_softirq+0x25/0x2a 
[18845.358274] [<c102664c>] _local_bh_enable_ip+0x5e/0x6a 
[18845.389677] [<c102666d>] local_bh_enable+0xb/0xe 
[18845.417944] [<e08490a8>] ppp_unregister_channel+0x32/0xbb [ppp_generic] 
[18845.458193] [<e08731ad>] pppox_unbind_sock+0x18/0x1f [pppox] 

This patch uses an RCU-inspired approach to fix it. In the RX tasklet's
find_vcc() function we first refuse to use a VCC which already has the
ATM_VF_READY bit cleared. And in the VCC close function, we synchronise
with the tasklet to ensure that it can't still be using the VCC before
we continue and allow the VCC to be destroyed.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Nathan Williams <nathan@traverse.com.au>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07 23:02:59 -07:00
Karl Hiramoto 49d49106fc atm/solos-pci: call atm_dev_signal_change() when signal changes.
Propagate changes to upper atm layer, so userspace netmontor knows when DSL
showtime reached.

Signed-off-by: Karl Hiramoto <karl@hiramoto.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 00:09:22 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Andrew Morton 7adcdb4c11 drivers/atm/solos-pci.c: fix warning/bug, clean up code
drivers/atm/solos-pci.c: In function 'flash_upgrade':
drivers/atm/solos-pci.c:528: warning: 'fw_name' may be used uninitialized in this function

Cc: Chas Williams <chas@cmf.nrl.navy.mil>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Nathan Williams <nathan@traverse.com.au>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18 05:03:32 -08:00
Ben Hutchings 9fca79d670 solos-pci: declare MODULE_FIRMWARE
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10 20:28:48 -08:00
David S. Miller efb064dec6 Merge branch 'master' of git://git.infradead.org/users/dwmw2/solos-2.6 2009-09-22 15:18:59 -07:00
Julia Lawall 6cf5767c71 drivers/atm: Correct redundant test
str has already been tested.  It seems that this test should be on the
recently returned value snr.

A simplified version of the semantic match that finds this problem is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E;
@@

if (x == NULL || ...) { ... when forall
   return ...; }
... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\)
(
*x == NULL
|
*x != NULL
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27 11:38:52 -07:00
Yang Hongyang e930438c42 Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)
This is the second go through of the old DMA_nBIT_MASK macro,and there're not
so many of them left,so I put them into one patch.I hope this is the last round.
After this the definition of the old DMA_nBIT_MASK macro could be removed.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:33 -07:00
Nathan Williams 78f857f265 solos: Check for rogue received packets
Sometimes there can be received packets with the size field set to 0xFFFF.
This seems to only occur after an FPGA or firmware upgrade.
This patch discards packets with an invalid size.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-25 11:17:49 +00:00
Nathan Williams 4dbedf43d2 solos: support new FPGA RAM layout
Buffer sizes have been changed to 2048 bytes.
Flash upgrades use a dedicated RAM block.
Add support for daughterboard.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-25 11:17:17 +00:00
David S. Miller ed36604b25 Merge branch 'master' of git://git.infradead.org/~dwmw2/solos-2.6 2009-03-21 13:23:01 -07:00
David Woodhouse 1329f4550f solos: Disable DMA until we have an FPGA update with it actually implemented.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-17 15:10:51 +00:00
Nathan Williams 0fc36aa52a solos: Automatically determine number of ports
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-17 15:01:02 +00:00
David Woodhouse 97d759d3e8 solos: Reset device on unload, free pending skbs
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-17 14:59:34 +00:00
Julia Lawall bc111d570b drivers/atm: introduce missing kfree
Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08 17:00:02 -08:00
David Woodhouse f87b2ed225 solos: Swap upstream/downstream rates in status packet, clean up some more
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-30 14:57:48 +11:00
David Woodhouse eab50f73ca solos: Set RX empty flag at startup only for !dma mode
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-30 14:27:26 +11:00
David Woodhouse cd5549e0f4 solos: Don't clear config registers at startup
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-30 14:26:37 +11:00
David Woodhouse 95852f48c2 solos: Tidy up status interrupt handling, cope with 'ERROR' status
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-30 14:23:52 +11:00
David Woodhouse cc3657e1f6 solos: Add 'reset' module parameter to reset the DSL chips on load
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-30 14:23:22 +11:00
David Woodhouse bdc54625b6 solos: Remove debugging, commented-out test code
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 14:37:20 +11:00
David Woodhouse 35c2221ba1 solos: Clean up handling of card->tx_mask a little
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 14:24:55 +11:00
David Woodhouse c6428e52fa solos: Fix various bugs in status packet handling
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 12:17:09 +11:00
David Woodhouse a0641cc49a solos: Remove superfluous wait_queue_head_t from struct solos_param
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 11:31:28 +11:00
David Woodhouse fcd82664cb solos: Remove IRQF_DISABLED, don't frob IRQ enable on the FPGA in solos_irq()
Neither of these are necessary.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 11:29:12 +11:00
David Woodhouse cd2169fbfb solos: Remove unused loopback debug stuff
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 11:12:58 +11:00
David Woodhouse f69e417033 solos: Tidy up tx_mask handling for ports which need TX
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 11:10:58 +11:00
David Woodhouse eaf83e3935 solos: Tidy up DMA handling a little. Still untested
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-29 10:51:11 +11:00
David Woodhouse 909372317e solos: First attempt at DMA support
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-28 16:46:56 +11:00
David Woodhouse c0fe30265a solos: Remove parameter group from sysfs on ATM dev deregister
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-28 14:34:34 +11:00
David Woodhouse 3456b22111 solos: Fix under-allocation of skb size for get/set parameters
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-28 10:39:23 +11:00
David Woodhouse af7806560c solos: Add SNR and Attn to status packet, fix oops on load
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-28 10:22:57 +11:00
David Woodhouse b28a4b9a38 solos: Reject non-AAL5 connections.... for now
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 21:50:59 +11:00
David Woodhouse 1e615df654 solos: Kill existing connections on link down event
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 21:47:47 +11:00
David Woodhouse 87ebb18627 solos: Handle new line status change packets, hook up to ATM layer info
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 20:02:30 +11:00
David Woodhouse d057f0a4ef solos: Add initial list of parameters
I don't much like the trick with multiple inclusions of solos-attrlist.c
but don't really see a saner way to do it without repeating the list.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 16:52:07 +11:00
David Woodhouse 01e2ffac7d solos: Handle attribute show/store in kernel more sanely
There are still a _lot_ of attributes, but for at least the basic ones
we want to be able to get/set them from the kernel. Especially the ones
we want to inform the ATM core about (link state, speed).

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 16:20:04 +11:00
David Woodhouse 316bea7936 solos: Kill global 'opens' count.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 14:25:16 +11:00
David Woodhouse fa755b9f2b solos: Clean up firmware loading code
We no longer try to load firmware while the ATM is up and running.
However, this means that we _do_ make init_module() wait for it, and it
takes a long time for now (since we're using ultra-conservative code in
the FPGA for that too).

The inner loop which uses swahb32p() was by Simon Farnsworth.

Simon has patches which migrate us to request_firmware_nowait(), for
which we'll actually need to take down the ATM devices, do the upgrade,
then reregister them.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 14:19:26 +11:00
Simon Farnsworth 7c4015bdff solos: FPGA and firmware update support.
This is just a straight pull in of changes, syncing us up to 0.07 from
openadsl.sf.net

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: Simon Farnsworth <simon@farnz.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 14:18:32 +11:00
Simon Farnsworth 4306cad6fe solos: Slight debugging improvements
Print a message if pskb_expand_head fails.

Make atmdebug writable by root, so that you can turn printing of data sent to
and received from the card on and off at runtime - useful for tracking
corruption.

Signed-off-by: Simon Farnsworth <simon@farnz.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 14:18:17 +11:00
David Woodhouse b76811af76 solos: Fix length header in FPGA transfers
The length field shouldn't ever include the size of the header itself.
This fixes the problem that some people were seeing with 1500-byte
packets.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-27 10:18:51 +11:00
David Woodhouse 9c54004ea7 atm: Driver for Solos PCI ADSL2+ card.
This adds basic support for the 'Solos' PCI ADSL2+ cards being developed
by Traverse Technologies and Xrio Ltd:
http://www.traverse.com.au/productview.php?product_id=116

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 01:26:11 -08:00