Commit Graph

74 Commits

Author SHA1 Message Date
Srinivas Eeda 9140db04ef ocfs2: recover orphans in offline slots during recovery and mount
During recovery, a node recovers orphans in it's slot and the dead node(s). But
if the dead nodes were holding orphans in offline slots, they will be left
unrecovered.

If the dead node is the last one to die and is holding orphans in other slots
and is the first one to mount, then it only recovers it's own slot, which
leaves orphans in offline slots.

This patch queues complete_recovery to clean orphans for all offline slots
during mount and node recovery.

Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:26 -07:00
Mark Fasheh 9b7895efac ocfs2: Add a name indexed b-tree to directory inodes
This patch makes use of Ocfs2's flexible btree code to add an additional
tree to directory inodes. The new tree stores an array of small,
fixed-length records in each leaf block. Each record stores a hash value,
and pointer to a block in the traditional (unindexed) directory tree where a
dirent with the given name hash resides. Lookup exclusively uses this tree
to find dirents, thus providing us with constant time name lookups.

Some of the hashing code was copied from ext3. Unfortunately, it has lots of
unfixed checkpatch errors. I left that as-is so that tracking changes would
be easier.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03 11:39:15 -07:00
Sunil Mushran 96a6c64b53 ocfs2: Move struct recovery_map to a header file
Move the definition of struct recovery_map from journal.c to journal.h. This
is preparation for the next patch.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03 11:39:14 -07:00
Joel Becker c175a518b4 ocfs2: Checksum and ECC for directory blocks.
Use the db_check field of ocfs2_dir_block_trailer to crc/ecc the
dirblocks.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:34 -08:00
Joel Becker 13723d00e3 ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2
commit triggers and allow us to compute metadata ecc right before the
buffers are written out.  This commit provides ecc for inodes, extent
blocks, group descriptors, and quota blocks.  It is not safe to use
extened attributes and metaecc at the same time yet.

The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide
the type of block at their root.  Before, it didn't matter, but now the
root block must use the appropriate ocfs2_journal_access_*() function.
To keep this abstract, the structures now have a pointer to the matching
journal_access function and a wrapper call to call it.

A few places use naked ocfs2_write_block() calls instead of adding the
blocks to the journal.  We make sure to calculate their checksum and ecc
before the write.

Since we pass around the journal_access functions.  Let's typedef them
in ocfs2.h.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:32 -08:00
Joel Becker 50655ae9e9 ocfs2: Add journal_access functions with jbd2 triggers.
We create wrappers for ocfs2_journal_access() that are specific to the
type of metadata block.  This allows us to associate jbd2 commit
triggers with the block.  The triggers will compute metadata ecc in a
future commit.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:31 -08:00
Jan Kara 19ece546a4 ocfs2: Enable quota accounting on mount, disable on umount
Enable quota usage tracking on mount and disable it on umount. Also
add support for quota on and quota off quotactls and usrquota and
grpquota mount options. Add quota features among supported ones.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:24 -08:00
Jan Kara 2205363dce ocfs2: Implement quota recovery
Implement functions for recovery after a crash. Functions just
read local quota file and sync info to global quota file.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:24 -08:00
Jan Kara 90e86a63ea ocfs2: Support nested transactions
OCFS2 can easily support nested transactions. We just have to
take care and not spoil statistics acquire semaphore unnecessarily.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:23 -08:00
Mark Fasheh 53ef99cad9 ocfs2: Remove JBD compatibility layer
JBD2 is fully backwards compatible with JBD and it's been tested enough with
Ocfs2 that we can clean this code up now.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Joel Becker 10995aa245 ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.
Random places in the code would check a dinode bh to see if it was
valid.  Not only did they do different levels of validation, they
handled errors in different ways.

The previous commit unified inode block reads, validating all block
reads in the same place.  Thus, these haphazard checks are no longer
necessary.  Rather than eliminate them, however, we change them to
BUG_ON() checks.  This ensures the assumptions remain true.  All of the
code paths to these checks have been audited to ensure they come from a
validated inode read.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:52 -08:00
Joel Becker b657c95c11 ocfs2: Wrap inode block reads in a dedicated function.
The ocfs2 code currently reads inodes off disk with a simple
ocfs2_read_block() call.  Each place that does this has a different set
of sanity checks it performs.  Some check only the signature.  A couple
validate the block number (the block read vs di->i_blkno).  A couple
others check for VALID_FL.  Only one place validates i_fs_generation.  A
couple check nothing.  Even when an error is found, they don't all do
the same thing.

We wrap inode reading into ocfs2_read_inode_block().  This will validate
all the above fields, going readonly if they are invalid (they never
should be).  ocfs2_read_inode_block_full() is provided for the places
that want to pass read_block flags.  Every caller is passing a struct
inode with a valid ip_blkno, so we don't need a separate blkno argument
either.

We will remove the validation checks from the rest of the code in a
later commit, as they are no longer necessary.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:52 -08:00
Sunil Mushran ae0dff6830 ocfs2: Set journal descriptor to NULL after journal shutdown
Patch sets journal descriptor to NULL after the journal is shutdown.
This ensures that jbd2_journal_release_jbd_inode(), which removes the
jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode()
even after the journal has been shutdown.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Joel Becker d4a8c93c82 ocfs2: Make cached block reads the common case.
ocfs2_read_blocks() currently requires the CACHED flag for cached I/O.
However, that's the common case.  Let's flip it around and provide an
IGNORE_CACHE flag for the special users.  This has the added benefit of
cleaning up the code some (ignore_cache takes on its special meaning
earlier in the loop).

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14 11:58:22 -07:00
Joel Becker 0fcaa56a2a ocfs2: Simplify ocfs2_read_block()
More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED.
Only six pass a different flag set.  Rather than have every caller care,
let's make ocfs2_read_block() take no flags and always do a cached read.
The remaining six places can call ocfs2_read_blocks() directly.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14 11:51:57 -07:00
Joel Becker 31d33073ca ocfs2: Require an inode for ocfs2_read_block(s)().
Now that synchronous readers are using ocfs2_read_blocks_sync(), all
callers of ocfs2_read_blocks() are passing an inode.  Use it
unconditionally.  Since it's there, we don't need to pass the
ocfs2_super either.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14 11:43:29 -07:00
Joel Becker da1e90985a ocfs2: Separate out sync reads from ocfs2_read_blocks()
The ocfs2_read_blocks() function currently handles sync reads, cached,
reads, and sometimes cached reads.  We're going to add some
functionality to it, so first we should simplify it.  The uncached,
synchronous reads are much easer to handle as a separate function, so we
instroduce ocfs2_read_blocks_sync().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14 11:29:10 -07:00
Mark Fasheh a81cb88b64 ocfs2: Don't check for NULL before brelse()
This is pointless as brelse() already does the check.

Signed-off-by: Mark Fasheh
2008-10-13 17:02:44 -07:00
Joel Becker 2b4e30fbde ocfs2: Switch over to JBD2.
ocfs2 wants JBD2 for many reasons, not the least of which is that JBD is
limiting our maximum filesystem size.

It's a pretty trivial change.  Most functions are just renamed.  The
only functional change is moving to Jan's inode-based ordered data mode.
It's better, too.

Because JBD2 reads and writes JBD journals, this is compatible with any
existing filesystem.  It can even interact with JBD-based ocfs2 as long
as the journal is formated for JBD.

We provide a compatibility option so that paranoid people can still use
JBD for the time being.  This will go away shortly.

[ Moved call of ocfs2_begin_ordered_truncate() from ocfs2_delete_inode() to
  ocfs2_truncate_for_delete(). --Mark ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 17:02:43 -07:00
Mark Fasheh a1af7d15a1 ocfs2: Fix sleep-with-spinlock recovery regression
This fixes a bug introduced with 539d8264093560b917ee3afe4c7f74e5da09d6a5:
    [PATCH 2/2] ocfs2: Fix race between mount and recovery

ocfs2_mark_dead_nodes() was reading journal inodes while holding the
spinlock protecting our in-memory recovery state. The fix is very simple -
the disk state is protected by a cluster lock that's already held, so we
just move the spinlock down past the read.

Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-08-22 11:08:38 -07:00
Sunil Mushran 539d826409 [PATCH 2/2] ocfs2: Fix race between mount and recovery
As the fs recovery is asynchronous, there is a small chance that another
node can mount (and thus recover) the slot before the recovery thread
gets to it.

If this happens, the recovery thread will block indefinitely on the
journal/slot lock as that lock will be held for the duration of the mount
(by design) by the node assigned to that slot.

The solution implemented is to keep track of the journal replays using
a recovery generation in the journal inode, which will be incremented by the
thread replaying that journal. The recovery thread, before attempting the
blocking lock on the journal/slot lock, will compare the generation on disk
with what it has cached and skip recovery if it does not match.

This bug appears to have been inadvertently introduced during the mount/umount
vote removal by mainline commit 34d024f843. In the
mount voting scheme, the messaging would indirectly indicate that the slot
was being recovered.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-07-31 16:21:14 -07:00
Joel Becker e407e39783 ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
A couple places use OCFS2_DEBUG_FS where they really mean
CONFIG_OCFS2_DEBUG_FS.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-07-14 13:57:15 -07:00
Julia Lawall b1f3550fa1 ocfs2: Use BUG_ON
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no
side-effects to allow a definition of BUG_ON that drops the code completely.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ disable unlikely @ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (unlikely(E)) { BUG(); }
+ BUG_ON(E);
)

@@ expression E,f; @@

(
  if (<... f(...) ...>) { BUG(); }
|
- if (E) { BUG(); }
+ BUG_ON(E);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:11 -07:00
Joel Becker fc881fa0d5 ocfs2: De-magic the in-memory slot map.
The in-memory slot map uses the same magic as the on-disk one.  There is
a special value to mark a slot as invalid.  It relies on the size of
certain types and so on.

Write a new in-memory map that keeps validity as a separate field.  Outside
of the I/O functions, OCFS2_INVALID_SLOT now means what it is supposed to.
It also is no longer tied to the type size.

This also means that only the I/O functions refer to 16bit quantities.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker 553abd046a ocfs2: Change the recovery map to an array of node numbers.
The old recovery map was a bitmap of node numbers.  This was sufficient
for the maximum node number of 254.  Going forward, we want node numbers
to be UINT32.  Thus, we need a new recovery map.

Note that we can't keep track of slots here.  We must write down the
node number to recovery *before* we get the locks needed to convert a
node number into a slot number.

The recovery map is now an array of unsigned ints, max_slots in size.
It moves to journal.c with the rest of recovery.

Because it needs to be initialized, we move all of recovery initialization
into a new function, ocfs2_recovery_init().  This actually cleans up
ocfs2_initialize_super() a little as well.  Following on, recovery cleaup
becomes part of ocfs2_recovery_exit().

A number of node map functions are rendered obsolete and are removed.

Finally, waiting on recovery is wrapped in a function rather than naked
checks on the recovery_event.  This is a cleanup from Mark.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:02 -07:00
Joel Becker d85b20e4b3 ocfs2: Make ocfs2_slot_info private.
Just use osb_lock around the ocfs2_slot_info data.  This allows us to
take the ocfs2_slot_info structure private in slot_info.c.  All access
is now via accessors.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:02 -07:00
Mark Fasheh 8e8a4603b5 ocfs2: Move slot map access into slot_map.c
journal.c and dlmglue.c would refresh the slot map by hand.  Instead, have
the update and clear functions do the work inside slot_map.c.  The eventual
result is to make ocfs2_slot_info defined privately in slot_map.c

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:02 -07:00
Jan Kara 5fa0613ea5 ocfs2: Silence false lockdep warnings
Create separate lockdep lock classes for system file's i_mutexes. They are
used to guard allocations and similar things and thus rank differently
than i_mutex of a regular file or directory.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25 15:05:44 -08:00
Mark Fasheh d147b3d630 ocfs2: Support commit= mount option
Mostly taken from ext3. This allows the user to set the jbd commit interval,
in seconds. The default of 5 seconds stays the same, but now users can
easily increase the commit interval. Typically, this would be increased in
order to benefit performance at the expense of data-safety.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25 15:05:42 -08:00
Mark Fasheh e63aecb651 ocfs2: Rename ocfs2_meta_[un]lock
Call this the "inode_lock" now, since it covers both data and meta data.
This patch makes no functional changes.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25 14:46:01 -08:00
Mark Fasheh 34d024f843 ocfs2: Remove mount/unmount votes
The node maps that are set/unset by these votes are no longer relevant, thus
we can remove the mount and umount votes. Since those are the last two
remaining votes, we can also remove the entire vote infrastructure.

The vote thread has been renamed to the downconvert thread, and the small
amount of functionality related to managing it has been moved into
fs/ocfs2/dlmglue.c. All references to votes have been removed or updated.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-01-25 14:45:34 -08:00
Mark Fasheh e8aed3450c ocfs2: Re-journal buffers after transaction extend
ocfs2_extend_trans() might call journal_restart() which will commit dirty
buffers and then restart the transaction. This means that any buffers which
still need changes should be passed to journal_access() again. Some paths
during extend weren't doing this right.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-17 10:51:23 -08:00
Mark Fasheh 0879c584ff ocfs2: Allow for debugging of transaction extends
The nastiest cases of transaction extends are also the rarest. We can expose
them more quickly at the expense of performance by going straight to the
journal_restart() in ocfs2_extend_trans(). Wrap things in OCFS2_DEBUG_FS so
that we only do this when "expensive debugging" is turned on.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-17 10:51:14 -08:00
Mark Fasheh a86370fbb6 ocfs2: fix exit-while-locked bug in ocfs2_queue_orphans()
We're holding the cluster lock when a failure might happen in
ocfs2_dir_foreach() so it needs to be released.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-17 10:49:43 -08:00
Mark Fasheh 5eae5b96fc ocfs2: Remove open coded readdir()
ocfs2_queue_orphans() has an open coded readdir loop which can easily just
use a directory accessor function.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:37 -07:00
Mark Fasheh 316f4b9f98 ocfs2: Move directory manipulation code into dir.c
The code for adding, removing, deleting directory entries was splattered all
over namei.c. I'd rather have this all centralized, so that it's easier to
make changes for inline dir data, and eventually indexed directories.

None of the code in any of the functions was changed. I only removed the
static keyword from some prototypes so that they could be exported.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:36 -07:00
Christoph Hellwig 800deef3f6 [PATCH] ocfs2: use list_for_each_entry where benefical
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-10 17:19:49 -07:00
Mark Fasheh 1ca1a111b1 ocfs2: fix sparse warnings in fs/ocfs2
None of these are actually harmful, but the noise makes looking for real
problems difficult.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-05-02 15:08:08 -07:00
Mark Fasheh 8110b073a9 ocfs2: Fix up i_blocks calculation to know about holes
Older file systems which didn't support holes did a dumb calculation of
i_blocks based on i_size. This is no longer accurate, so fix things up to
take actual allocation into account.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:07:40 -07:00
Mark Fasheh 4f902c3772 ocfs2: Fix extent lookup to return true size of holes
Initially, we had wired things to return a size '1' of holes. Cook up a
small amount of code to find the next extent and calculate the number of
clusters between the virtual offset and the next allocated extent.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:45 -07:00
Mark Fasheh 49cb8d2d49 ocfs2: Read from an unwritten extent returns zeros
Return an optional extent flags field from our lookup functions and wire up
callers to treat unwritten regions as holes for the purpose of returning
zeros to the user.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:41 -07:00
Mark Fasheh 363041a5f7 ocfs2: temporarily remove extent map caching
The code in extent_map.c is not prepared to deal with a subtree being
rotated between lookups. This can happen when filling holes in sparse files.
Instead of a lengthy patch to update the code (which would likely lose the
benefit of caching subtree roots), we remove most of the algorithms and
implement a simple path based lookup. A less ambitious extent caching scheme
will be added in a later patch.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:01:31 -07:00
Tiger Yang 500086300e ocfs2: Remove delete inode vote
Ocfs2 currently does cluster-wide node messaging to check the open state of
an inode during delete. This patch removes that mechanism in favor of an
inode cluster lock which is taken at shared read when an inode is first read
and dropped in clear_inode(). This allows a deleting node to test the
liveness of an inode by attempting to take an exclusive lock.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 14:39:48 -07:00
Sunil Mushran c271c5c22b ocfs2: local mounts
This allows users to format an ocfs2 file system with a special flag,
OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT. When the file system sees this flag, it
will not use any cluster services, nor will it require a cluster
configuration, thus acting like a 'local' file system.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-07 17:37:53 -08:00
David Howells 9db7372445 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/ata/libata-scsi.c
	include/linux/libata.h

Futher merge of Linus's head and compilation fixups.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 17:01:28 +00:00
Mark Fasheh 1fabe1481f ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t
This is mostly a search and replace as ocfs2_journal_handle is now no more
than a container for a handle_t pointer.

ocfs2_commit_trans() becomes very straight forward, and we remove some out
of date comments / code.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:28 -08:00
Mark Fasheh 65eff9ccf8 ocfs2: remove handle argument to ocfs2_start_trans()
All callers either pass in NULL directly, or a local variable that is
already set to NULL.

The internals of ocfs2_start_trans() get a nice cleanup as a result.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:23 -08:00
Mark Fasheh dae85832ff ocfs2: remove ocfs2_journal_handle journal field
It is no longer used.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:13 -08:00
Mark Fasheh 02dc1af44e ocfs2: pass ocfs2_super * into ocfs2_commit_trans()
This sets us up to remove handle->journal.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:08 -08:00
Mark Fasheh 4bcec1847a ocfs2: remove unused handle argument from ocfs2_meta_lock_full()
Now that this is unused and all callers pass NULL, we can safely remove it.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-01 18:28:05 -08:00