Commit Graph

2739 Commits

Author SHA1 Message Date
Linus Torvalds 474829e875 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (53 commits)
  ACPI: install ACPI table handler before any dynamic tables being loaded
  ACPI / PM: Blacklist another machine that needs acpi_sleep=nonvs
  ACPI: Page based coalescing of I/O remappings optimization
  ACPI: Convert simple locking to RCU based locking
  ACPI: Pre-map 'system event' related register blocks
  ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Maintain a list of ACPI memory mapped I/O remappings
  ACPI: Fix ioremap size for MMIO reads and writes
  ACPI / Battery: Return -ENODEV for unknown values in get_property()
  ACPI / PM: Fix reference counting of power resources
  Subject: [PATCH] ACPICA: Fix Scope() op in module level code
  ACPI battery: support percentage battery remaining capacity
  ACPI: Make Embedded Controller command timeout delay configurable
  ACPI dock: move some functions to .init.text
  ACPI: thermal: remove unused limit code
  ACPI: static sleep_states[] and acpi_gts_bfs_check
  ACPI: remove dead code
  ACPI: delete dedicated MAINTAINERS entries for ACPI EC and BATTERY drivers
  ACPI: Only processor needs CPU_IDLE
  ACPICA: Update version to 20101013
  ...
2010-10-26 17:28:37 -07:00
Linus Torvalds 27afe58fe6 Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: do not use the LAPIC timer for ATOM C2
  intel_idle: add initial Sandy Bridge support
  acpi_idle: delete bogus data from cpuidle_state.power_usage
  intel_idle: delete bogus data from cpuidle_state.power_usage
  intel_idle: simplify test for leave_mm()
2010-10-26 17:28:07 -07:00
Len Brown 7e31842441 Merge branch 'misc' into release 2010-10-26 14:51:00 -04:00
Len Brown 1bd64d42ab Merge branch 'acpi-mmio' into release
Conflicts:
	drivers/acpi/osl.c

Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-26 14:50:56 -04:00
Zhang Rui b1d248d96c ACPI: install ACPI table handler before any dynamic tables being loaded
ACPI table sysfs I/F is broken by commit

78f1699659
Author: Alex Chiang <achiang@hp.com>
Date:   Sun Dec 20 12:19:09 2009 -0700
    ACPI: processor: call _PDC early

because dynamic SSDT tables may be loaded in _PDC,
before installing the ACPI table handler.
As a result, the sysfs I/F of these dynamic tables are
located at  /sys/firmware/acpi/tables instead of
/sys/firmware/acpi/tables/dynamic, which is not true.

Invoke acpi_sysfs_init() before acpi_early_processor_set_pdc(),
so that the table handler is installed before any dynamic tables loaded.

https://bugzilla.kernel.org/show_bug.cgi?id=21142

CC: Dennis Jansen <dennis.jansen@web.de>
CC: Alex Chiang <achiang@hp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-26 04:55:29 -04:00
Rafael J. Wysocki af48931c48 ACPI / PM: Blacklist another machine that needs acpi_sleep=nonvs
Sony Vaio VPCEB1Z1E is reported to require acpi_sleep=nonvs for
suspend/resume to work on it correctly, so blacklist it.

Reported-by: Emanuele Bigiarini <pulmro@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-25 20:12:12 -04:00
Len Brown 4895ae6f9f Merge branch 'ec-param' into release 2010-10-25 02:14:50 -04:00
Len Brown 22156ea7bb Merge branch 'power-refcount' into release 2010-10-25 02:13:37 -04:00
Len Brown d3b683d3b0 Merge branch 'cleanup' into release 2010-10-25 02:13:21 -04:00
Len Brown 6e04c417ae Merge branch 'gpe-defer' into release 2010-10-25 02:13:09 -04:00
Len Brown 880308089d Merge branch 'battery' into release 2010-10-25 02:12:57 -04:00
Len Brown e000f8f729 Merge branch 'acpi_pm_device_sleep_state' into release 2010-10-25 02:12:46 -04:00
Len Brown 38add9b4ba Merge branches 'bugzilla-15807', 'bugzilla-15979-v2' and 'bugzilla-19162' into release 2010-10-25 02:12:27 -04:00
Len Brown f3ab69a321 Merge branch 'procfs-cleanup-v2' into release 2010-10-25 02:11:49 -04:00
Len Brown aca209e5e6 Merge branch 'acpica' into release
Conflicts:
	drivers/acpi/acpica/aclocal.h

Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-25 02:10:36 -04:00
Myron Stowe 4a3cba5e72 ACPI: Page based coalescing of I/O remappings optimization
This patch optimizes ACPI MMIO remappings by keeping track of the
remappings on a PAGE_SIZE granularity.

When an ioremap() occurs, the underlying infrastructure works on a 'page'
based granularity.  As such, an ioremap() request for 1 byte for example,
will end up mapping in an entire (PAGE_SIZE) page.  Huang Ying took
advantage of this in commit 15651291a2 by
checking if subsequent ioremap() requests reside within any of the list's
existing remappings still in place, and if so, incrementing a reference
count on the existing mapping as opposed to performing another ioremap().

Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24 23:31:43 -04:00
Myron Stowe 78cdb3ed40 ACPI: Convert simple locking to RCU based locking
Convert the simple locking introduced earlier for the ACPI MMIO
remappings list to an RCU based locking scheme.

Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24 23:28:16 -04:00
Myron Stowe d362edaf53 ACPI: Pre-map 'system event' related register blocks
During ACPI initialization, pre-map fixed hardware registers that are
accessed during ACPI's 'system event' related IRQ handing.

ACPI's 'system event' handing accesses specific fixed hardware
registers; namely PM1a event, PM1b event, GPE0, and GPE1 register
blocks which are declared within the FADT.  If these registers are
backed by MMIO, as opposed to I/O port space, accessing them within
interrupt context will cause a panic as acpi_os_read_memory()
depends on ioremap() in such cases - BZ 18012.

By utilizing the functionality provided in the previous two patches -
ACPI: Maintain a list of ACPI memory mapped I/O remappings, and, ACPI:
Add interfaces for ioremapping/iounmapping ACPI registers - accesses
to ACPI MMIO areas will now be safe from within interrupt contexts (IRQ
and/or NMI) provided the area was pre-mapped.  This solves BZ 18012.

ACPI "System Event" reference(s):
  ACPI Specification, Revision 4.0, Section 3 "ACPI Overview",
  3.8 "System Events", 5.6 "ACPI Event Programming Model".

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=18012

Reported-by: <bjorn.helgaas@hp.com>
Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24 23:27:09 -04:00
Myron Stowe 2971852123 ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
Add remapping and unmapping interfaces for ACPI registers that are
backed by memory mapped I/O (MMIO).  These interfaces, along with
the MMIO remapping list, enable accesses of such registers from within
interrupt context.

ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic
hardware registers use the GAS format):
  ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
  Structure".

Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24 23:26:23 -04:00
Myron Stowe 620242ae8c ACPI: Maintain a list of ACPI memory mapped I/O remappings
For memory mapped I/O (MMIO) remappings, add a list to maintain the
remappings and augment the corresponding mapping and unmapping interface
routines (acpi_os_map_memory() and acpi_os_unmap_memory()) to
dynamically add to, and delete from, the list.

The current ACPI I/O accessing methods - acpi_read() and acpi_write() -
end up calling ioremap() when accessing MMIO.  This prevents use of these
methods within interrupt context (IRQ and/or NMI), since ioremap() may
block to allocate memory.  Maintaining a list of MMIO remappings enables
accesses to such areas from within interrupt context provided they have
been pre-mapped.

Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24 23:25:52 -04:00
Myron Stowe b3ba1efec2 ACPI: Fix ioremap size for MMIO reads and writes
The size used for I/O remapping MMIO read and write accesses has not
accounted for the basis of ACPI's Generic Address Structure (GAS)
'Register Bit Width' field which is bits, not bytes.  This patch
adjusts the ioremap() 'size' argument accordingly.

ACPI "Generic Register" reference:
  ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
  Structure".

Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-24 23:24:54 -04:00
Rafael J. Wysocki a1b4bd694a ACPI / Battery: Return -ENODEV for unknown values in get_property()
The function acpi_battery_get_property() is called by the
power supply framework's function power_supply_show_property()
implementing the sysfs interface for power supply devices as the
ACPI battery driver's ->get_property() callback.  Thus it is supposed
to return error code if the value of the given property is unknown.
Unfortunately, however, it returns 0 in those cases and puts a
wrong (negative) value into the intval field of the
union power_supply_propval object provided by
power_supply_show_property().  In consequence, wrong negative
values are read by user space from the battery's sysfs files.

Fix this by making acpi_battery_get_property() return -ENODEV
for properties with unknown values (-ENODEV is returned, because
power_supply_uevent() returns with error for any other error code
returned by power_supply_show_property()).

Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 14:05:03 -04:00
Rafael J. Wysocki 3e384ee6c6 ACPI / PM: Fix reference counting of power resources
The reference counting of ACPI power resources is currently broken
for a few reasons.  First, instead of using a simple reference
counter per power resource it uses a list of objects representing
refereces to the given power resource from devices.  This leads to
the second breakage, because it prevents power resources from
being referenced more than once by one device, which is necessary
if the device is configured to signal wakeup.  Namely, when putting
the device into a low power state we first call
acpi_enable_wakeup_device_power() that should reference count power
resources needed for signaling wakeup and then we call
acpi_power_transition() to power off the device.  The latter call
drops references to the device's power resources, possibly including
the ones added by acpi_enable_wakeup_device_power(), so the device
can't signal wakeup as a result.  Apart from this, the locking
in acpi_power_on() and acpi_power_off_device() doesn't prevent
all possible races from happening, which may be problematic for
runtime PM and asynchronous suspend and resume.

Fix the problem by using a counter for power resources reference
counting and putting the evaluation of ACPI _ON and _OFF methods
under the power resource mutex.

Reported-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 01:56:14 -04:00
Bob Moore 8df3fc981d Subject: [PATCH] ACPICA: Fix Scope() op in module level code
Some Panasonic Toughbooks create nodes in module level code.
Module level code is the executable AML code outside of control method,
for example, below AML code creates a node \_SB.PCI0.GFX0.DD02.CUBL

        If (\_OSI ("Windows 2006"))
        {
            Scope (\_SB.PCI0.GFX0.DD02)
            {
                Name (CUBL, Ones)
                ...
            }
        }

Scope() op does not actually create a new object, it refers to an
existing object(\_SB.PCI0.GFX0.DD02 in above example). However, for
Scope(), we want to indeed open a new scope, so the child nodes(CUBL in
above example) can be created correctly under it.

https://bugzilla.kernel.org/show_bug.cgi?id=19462

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-23 01:36:40 -04:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Zhang Rui 557d58687d ACPI battery: support percentage battery remaining capacity
According to the ACPI spec, some kinds of primary battery can
report percentage battery remaining capacity directly to OS.

In this case, it reports the LastFullChargedCapacity == 100,
BatteryPresentRate = 0xFFFFFFFF, and BatteryRemaingCapacity a
percentage value, which actually means RemainingBatteryPercentage.

Now we found some battery follows this rule even if it's a rechargeable.
https://bugzilla.kernel.org/show_bug.cgi?id=15979

Handle these batteries correctly in ACPI battery driver
so that they won't break userspace.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-22 01:28:07 -04:00
Thomas Renninger 7a18e96dcb ACPI: Make Embedded Controller command timeout delay configurable
Here and then there show up machines which need higher timeout values.
Finding this on affected machines can be cumbersome, because
ACPI_EC_DELAY is a compile option -> make it configurable via boot param.

This can even be provided writable at runtime via:
/sys/modules/acpi/parameters/ec_delay

Known machines where this helps:
Some HP machines where for whatever reasons specific EC accesses take
very long at resume from S3 (in _WAK function).
The AE_TIME error is passed upwards and the ACPI interpreter will
not execute the rest of the _WAK function which results in not properly
initialized devices/variables with different side-effects.

Afaik, on some MSI machines this helped as well.

If this param is needed there probably are underlying problems like:
  - EC firmware bug
  - A kernel EC driver bug
  - An ACPI interpreter behavior (e.g. timings when specific
    EC accesses happen and how) which the EC does not like
  - ...
which should get evaluated further, but often are nasty or
impossible to fix from OS side.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-22 01:21:30 -04:00
Linus Torvalds 2a8b67fb72 Merge branch 'x86-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hotplug: In the MWAIT case of play_dead, CLFLUSH the cache line
  x86, hotplug: Move WBINVD back outside the play_dead loop
  x86, hotplug: Use mwait to offline a processor, fix the legacy case
  x86, mwait: Move mwait constants to a common header file
2010-10-21 13:45:38 -07:00
Uwe Kleine-König d38a5edf81 ACPI dock: move some functions to .init.text
find_dock and find_bay are only called by dock_init which lives in
.init.text dock_add is only called by find_dock and find_bay.  So all
three functions can be moved to .init.text, too.

This fixes:

        WARNING: vmlinux.o(.text+0x2134b7): Section mismatch in reference from the function dock_add() to the function .init.text:platform_device_register_resndata()
        The function dock_add() references
        the function __init platform_device_register_resndata().
        This is often because dock_add lacks a __init
        annotation or the annotation of platform_device_register_resndata is wrong.

for a build with unset CONFIG_MODULES.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19 14:03:04 -04:00
Len Brown ab7c13c4a5 ACPI: thermal: remove unused limit code
acpi_processor_apply_limit()
acpi_thermal_cpufreq_increase()
acpi_thermal_cpufreq_decrease()

Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19 13:58:34 -04:00
Stephen Hemminger 01eac60bcc ACPI: static sleep_states[] and acpi_gts_bfs_check
Only used in one file so should be static.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19 13:44:37 -04:00
Stephen Hemminger 5ba8b1c6fe ACPI: remove dead code
Found by running make namespacecheck on linux-next

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19 13:44:21 -04:00
Jean Delvare a4084c147b ACPI: Only processor needs CPU_IDLE
ACPI support itself doesn't need CPU_IDLE, only ACPI_PROCESSOR does,
so only ACPI_PROCESSOR should select CPU_IDLE.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19 13:37:56 -04:00
Colin Ian King 49b3c1e04e ACPICA: Clear PCIEXP_WAKE_STS when clearing ACPI events
When clearing status bits via acpi_hw_clear_acpi_status, also clear
the PCIEXP_WAKE_STS bit. Original change from Colin King.
ACPICA BZ 880.

http://www.acpica.org/bugzilla/show_bug.cgi?id=880
http://bugs.launchpad.net/bugs/613381

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-17 22:55:41 -04:00
Bob Moore 23ebbf0706 ACPICA: Add Vista SP2 to supported _OSI strings
Added "Windows 2006 SP2" for Vista SP2.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-17 22:55:40 -04:00
Bob Moore 34cf66e724 ACPICA: Eliminate duplicate code in acpi_ut_execute_* functions
Now that the nsrepair code automatically repairs _HID-related
strings, this type of code is no longer needed in acpi_ut_execute_HID,
acpi_ut_execute_CID, and acpi_ut_execute_UID. ACPICA BZ 878.

http://www.acpica.org/bugzilla/show_bug.cgi?id=878

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-17 22:55:39 -04:00
Bob Moore 81256669aa ACPICA: Change type of _TZ from ThermalZone to Device
The type of ThermalZone was confusing hosts as they process the
various ThermalZone objects. ACPICA BZ 876.

http://www.acpica.org/bugzilla/show_bug.cgi?id=876

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-17 22:55:38 -04:00
Bob Moore 3989170f8e ACPICA: Comment update; no functional change
Add a usage note to InstallAddressSpaceHandler.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-17 22:55:20 -04:00
Zhang Rui 03e7c3432d ACPI: remove unused declaration of proc_fs.h
Remove unused declaration of proc_fs.h.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 22:03:36 -04:00
Zhang Rui d5c6887c7f ACPI processor: make /proc/acpi/processor/*/throttle depends on CONFIG_ACPI_PROCFS
As a feature that would only be used when system is overheating,
the processor t-state control should not be exported to user space.
Make /proc/acpi/processor/*/throttle depends on CONFIG_ACPI_PROCFS,
which is cleared by default.
And we will remove this I/F in 2.6.38.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 22:03:17 -04:00
Zhang Rui 39fe394d05 ACPI video: remove deprecated procfs I/F
Remove the deprecated ACPI video driver procfs I/F,
as stated in the changelog of commit 6e37c658ae

New sysfs I/F is available at /sys/class/backlight/

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 22:03:08 -04:00
Zhang Rui c57b62f5b1 ACPI thermal: remove deprecated procfs I/F
Remove the deprecated ACPI thermal driver procfs I/F,
as stated in the changelog of commit 43d9f87b79

sysfs I/F is available at /sys/class/thermal/thermal_zoneX/

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 22:03:01 -04:00
Zhang Rui b2a44989c1 ACPI fan: remove deprecated procfs I/F
Remove deprecated ACPI Fan driver procfs interface.

The ACPI fan driver (CONFIG_ACPI_FAN) selects
the generic thermal sysfs driver (CONFIG_THERMAL) since 2.6.26,
so new sysfs I/F is available at /sys/class/thermal/cooling_devicecX/

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 22:02:47 -04:00
Zhang Rui 1b3d4c3b9a ACPI ac/battery/sbs: sysfs I/F always built in, procfs I/F disabled by default
ACPI AC/Battery/SBS driver has different kernel option for procfs and sysfs I/F.

This patch,
1. Change CONFIG_ACPI_PROCFS_POWER to 'n' by default so that we can remove it in the next release or two.
2. Remove CONFIG_ACPI_SYSFS_POWER and always build in the sysfs I/F of these drivers.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 22:02:38 -04:00
Len Brown 3af283e114 ACPI: add FW_BUG to OSI(Linux) message
Linux-2.6.22 initiated a dmesg complaint when it saw BIOS that invoked
OSI(Linux).  Linux-2.6.23 continued that complaint and started our
policy of ignoring the bogus BIOS request.

Past-time for Linux to label that complaint with FW_BUG.

Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 21:38:57 -04:00
Len Brown 0f3f164d97 acpi_idle: delete bogus data from cpuidle_state.power_usage
The mW data in this field comes from AML _CST,
which was typed in by a BIOS writer, and is thus
considered unreliable.

Linux does not use it for making any decisions.
We do display it in sysfs where somebody might
read it and assume it is meaningful, so delete it.

Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 21:25:02 -04:00
Rafael J. Wysocki 761afb869f ACPI / PM: Fix problems with acpi_pm_device_sleep_state()
There is a number of problems with acpi_pm_device_sleep_state() now.
First, if _S0W is not defined, it prevents devices from being put
into D3 by PCI runtime PM, which shouldn't happen.  Second, it
shouldn't use adev->wakeup.state.enabled, because if it's set, it
only means that either the device is permanently enabled to wake up
the system, or that it has been enabled to do that through
/proc/acpi/wakeup.  Finally, it should be compiled if CONFIG_PM_SLEEP
is not set, so that PCI runtime PM works correctly in that case.
Fix these problems.

Reported-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15 16:25:15 -04:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Len Brown 7cfff7f212 Merge branch 'msi-dmi' into release 2010-10-08 22:37:46 -04:00
Len Brown c9933f795c Merge branch 'pdc-regression' into release 2010-10-08 22:35:02 -04:00