Commit Graph

48 Commits

Author SHA1 Message Date
Tao Ma f5e27b6ddf ocfs2: Don't duplicate pages past i_size during CoW.
During CoW, the pages after i_size don't contain valid data, so there's
no need to read and duplicate them.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-15 10:54:28 -07:00
Joel Becker 5693486bad ocfs2: Zero the tail cluster when extending past i_size.
ocfs2's allocation unit is the cluster.  This can be larger than a block
or even a memory page.  This means that a file may have many blocks in
its last extent that are beyond the block containing i_size.  There also
may be more unwritten extents after that.

When ocfs2 grows a file, it zeros the entire cluster in order to ensure
future i_size growth will see cleared blocks.  Unfortunately,
block_write_full_page() drops the pages past i_size.  This means that
ocfs2 is actually leaking garbage data into the tail end of that last
cluster.  This is a bug.

We adjust ocfs2_write_begin_nolock() and ocfs2_extend_file() to detect
when a write or truncate is past i_size.  They will use
ocfs2_zero_extend() to ensure the data is properly zeroed.

Older versions of ocfs2_zero_extend() simply zeroed every block between
i_size and the zeroing position.  This presumes three things:

1) There is allocation for all of these blocks.
2) The extents are not unwritten.
3) The extents are not refcounted.

(1) and (2) hold true for non-sparse filesystems, which used to be the
only users of ocfs2_zero_extend().  (3) is another bug.

Since we're now using ocfs2_zero_extend() for sparse filesystems as
well, we teach ocfs2_zero_extend() to check every extent between
i_size and the zeroing position.  If the extent is unwritten, it is
ignored.  If it is refcounted, it is CoWed.  Then it is zeroed.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
2010-07-08 13:25:35 -07:00
Linus Torvalds 03e62303cf Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (47 commits)
  ocfs2: Silence a gcc warning.
  ocfs2: Don't retry xattr set in case value extension fails.
  ocfs2:dlm: avoid dlm->ast_lock lockres->spinlock dependency break
  ocfs2: Reset xattr value size after xa_cleanup_value_truncate().
  fs/ocfs2/dlm: Use kstrdup
  fs/ocfs2/dlm: Drop memory allocation cast
  Ocfs2: Optimize punching-hole code.
  Ocfs2: Make ocfs2_find_cpos_for_left_leaf() public.
  Ocfs2: Fix hole punching to correctly do CoW during cluster zeroing.
  Ocfs2: Optimize ocfs2 truncate to use ocfs2_remove_btree_range() instead.
  ocfs2: Block signals for mkdir/link/symlink/O_CREAT.
  ocfs2: Wrap signal blocking in void functions.
  ocfs2/dlm: Increase o2dlm lockres hash size
  ocfs2: Make ocfs2_extend_trans() really extend.
  ocfs2/trivial: Code cleanup for allocation reservation.
  ocfs2: make ocfs2_adjust_resv_from_alloc simple.
  ocfs2: Make nointr a default mount option
  ocfs2/dlm: Make o2dlm domain join/leave messages KERN_NOTICE
  o2net: log socket state changes
  ocfs2: print node # when tcp fails
  ...
2010-05-21 07:20:17 -07:00
Joel Becker 41841b0bce Merge branch 'discontig-bg' of git://oss.oracle.com/git/tma/linux-2.6 into ocfs2-merge-window 2010-05-18 16:40:42 -07:00
Tristan Ye 78f94673d7 Ocfs2: Optimize ocfs2 truncate to use ocfs2_remove_btree_range() instead.
Truncate is just a special case of punching holes(from new i_size to
end), we therefore could take advantage of the existing
ocfs2_remove_btree_range() to reduce the comlexity and redundancy in
alloc.c.  The goal here is to make truncate more generic and
straightforward.

Several functions only used by ocfs2_commit_truncate() will smiply be
removed.

ocfs2_remove_btree_range() was originally used by the hole punching
code, which didn't take refcount trees into account (definitely a bug).
We therefore need to change that func a bit to handle refcount trees.
It must take the refcount lock, calculate and reserve blocks for
refcount tree changes, and decrease refcounts at the end.  We replace 
ocfs2_lock_allocators() here by adding a new func
ocfs2_reserve_blocks_for_rec_trunc() which accepts some extra blocks to
reserve.  This will not hurt any other code using
ocfs2_remove_btree_range() (such as dir truncate and hole punching).

I merged the following steps into one patch since they may be
logically doing one thing, though I know it looks a little bit fat
to review.

1). Remove redundant code used by ocfs2_commit_truncate(), since we're
    moving to ocfs2_remove_btree_range anyway.

2). Add a new func ocfs2_reserve_blocks_for_rec_trunc() for purpose of
    accepting some extra blocks to reserve.

3). Change ocfs2_prepare_refcount_change_for_del() a bit to fit our
    needs.  It's safe to do this since it's only being called by
    truncate.

4). Change ocfs2_remove_btree_range() a bit to take refcount case into
    account.

5). Finally, we change ocfs2_commit_truncate() to call
    ocfs2_remove_btree_range() in a proper way.

The patch has been tested normally for sanity check, stress tests
with heavier workload will be expected.

Based on this patch, fixing the punching holes bug will be fairly easy.

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18 12:25:10 -07:00
Tao Ma c901fb0073 ocfs2: Make ocfs2_extend_trans() really extend.
In ocfs2, we use ocfs2_extend_trans() to extend a journal handle's
blocks. But if jbd2_journal_extend() fails, it will only restart
with the the new number of blocks.  This tends to be awkward since
in most cases we want additional reserved blocks. It makes our code
harder to mantain since the caller can't be sure all the original
blocks will not be accessed and dirtied again.  There are 15 callers
of ocfs2_extend_trans() in fs/ocfs2, and 12 of them have to add
h_buffer_credits before they call ocfs2_extend_trans().  This makes
ocfs2_extend_trans() really extend atop the original block count.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:09 -07:00
Joel Becker ec20cec7a3 ocfs2: Make ocfs2_journal_dirty() void.
jbd[2]_journal_dirty_metadata() only returns 0.  It's been returning 0
since before the kernel moved to git.  There is no point in checking
this error.

ocfs2_journal_dirty() has been faithfully returning the status since the
beginning.  All over ocfs2, we have blocks of code checking this can't
fail status.  In the past few years, we've tried to avoid adding these
checks, because they are pointless.  But anyone who looks at our code
assumes they are needed.

Finally, ocfs2_journal_dirty() is made a void function.  All error
checking is removed from other files.  We'll BUG_ON() the status of
jbd2_journal_dirty_metadata() just in case they change it someday.  They
won't.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:17:29 -07:00
Joel Becker f9221fd803 Merge branch 'skip_delete_inode' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2-mark into ocfs2-fixes 2010-04-30 13:37:29 -07:00
Tao Ma c21a534e2f ocfs2: Update VFS inode's id info after reflink.
In reflink we update the id info on the disk but forgot to update
the corresponding information in the VFS inode.  Update them
accordingly when we want to preserve the attributes.

Reported-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-04-23 14:43:22 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Tao Ma 74380c479a ocfs2: Free block to the right block group.
In case the block we are going to free is allocated from
a discontiguous block group, we have to use suballoc_loc
to be the right group.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-03-22 14:20:18 +08:00
Joel Becker 2b6cb576aa ocfs2: Set suballoc_loc on allocated metadata.
Get the suballoc_loc from ocfs2_claim_new_inode() or
ocfs2_claim_metadata().  Store it on the appropriate field of the block
we just allocated.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:09:15 +08:00
Joel Becker 1ed9b777f7 ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument.
They all take an ocfs2_alloc_context, which has the allocation inode.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-06 13:59:06 +08:00
Tao Ma 6527f8f848 ocfs2: Update i_blocks in reflink operations.
In reflink, we need to upate i_blocks for the target inode.

Reported-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-17 12:28:00 -07:00
Linus Torvalds e213e26ab3 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
  quota: stop using QUOTA_OK / NO_QUOTA
  dquot: cleanup dquot initialize routine
  dquot: move dquot initialization responsibility into the filesystem
  dquot: cleanup dquot drop routine
  dquot: move dquot drop responsibility into the filesystem
  dquot: cleanup dquot transfer routine
  dquot: move dquot transfer responsibility into the filesystem
  dquot: cleanup inode allocation / freeing routines
  dquot: cleanup space allocation / freeing routines
  ext3: add writepage sanity checks
  ext3: Truncate allocated blocks if direct IO write fails to update i_size
  quota: Properly invalidate caches even for filesystems with blocksize < pagesize
  quota: generalize quota transfer interface
  quota: sb_quota state flags cleanup
  jbd: Delay discarding buffers in journal_unmap_buffer
  ext3: quota_write cross block boundary behaviour
  quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
  quota: split out compat_sys_quotactl support from quota.c
  quota: split out netlink notification support from quota.c
  quota: remove invalid optimization from quota_sync_all
  ...

Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
2010-03-05 13:20:53 -08:00
Christoph Hellwig 871a293155 dquot: cleanup dquot initialize routine
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Tiger Yang b89c54282d ocfs2: add extent block stealing for ocfs2 v5
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:07 -08:00
Tao Ma 0a1ea437d8 ocfs2: Only bug out when page size is larger than cluster size.
In CoW, we have to make sure that the page is already written
out to the disk. So we have a BUG_ON(PageDirty(page)).

In ppc platform we have pagesize=64K, so if the cs=4K, if the
file have fragmented clusters, we will map the page many times.
See this file as an example.
Tree Depth: 0   Count: 19   Next Free Rec: 14
	## Offset        Clusters       Block#          Flags
	0  0             4              2164864         0x2 Refcounted
	1  4             2              9302792         0x2 Refcounted
...

We have to replace the extent recs one by one, so the page with index 0
will be mapped and dirtied twice.

I'd like to leave the BUG_ON there while adding a check so that in
case we meet with an error in other platforms, we can find it easily.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-02 18:15:35 -08:00
Tao Ma d622b89a2f ocfs2: Fix memory overflow in cow_by_page.
In ocfs2_duplicate_clusters_by_page, we calculate map_end
by shifting page_index. But actually in case we meet with
a large offset(say in a i686 box, poff_t is only 32 bits
and page_index=2056240), we will overflow. So change the
type of page_index to loff_t.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-02 18:14:20 -08:00
Linus Torvalds 849254e9bb Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Set i_nlink properly during reflink.
  ocfs2: Add reflinked file's inode to inode hash eariler.
  ocfs2: refcounttree.c cleanup.
  ocfs2: Find proper end cpos for a leaf refcount block.
2009-12-23 13:33:07 -08:00
Jiri Kosina d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Tao Ma 12d4cec988 ocfs2: refcounttree.c cleanup.
sparse check finds some endian problem and some other minor issues.
There is an obsolete function which should be removed.
So this patch resolve all these.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-02 16:15:01 -08:00
Tao Ma 38a04e4327 ocfs2: Find proper end cpos for a leaf refcount block.
ocfs2 refcount tree is stored as an extent tree while
the leaf ocfs2_refcount_rec points to a refcount block.

The following step can trip a kernel panic.
mkfs.ocfs2 -b 512 -C 1M --fs-features=refcount $DEVICE
mount -t ocfs2 $DEVICE $MNT_DIR
FILE_NAME=$RANDOM
FILE_NAME_1=$RANDOM
FILE_REF="${FILE_NAME}_ref"
FILE_REF_1="${FILE_NAME}_ref_1"
for((i=0;i<305;i++))
do
# /mnt/1048576 is a file with 1048576 sizes.
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1
done
for((i=0;i<3;i++))
do
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
done

for((i=0;i<2;i++))
do
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1
done

cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME

for((i=0;i<11;i++))
do
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1
done
reflink $MNT_DIR/$FILE_NAME $MNT_DIR/$FILE_REF
# write_f is a program which will write some bytes to a file at offset.
# write_f -f file_name -l offset -w write_bytes.
./write_f -f $MNT_DIR/$FILE_REF -l $[310*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_REF -l $[306*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_REF -l $[311*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_NAME -l $[310*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_NAME -l $[311*1048576] -w 4096
reflink $MNT_DIR/$FILE_NAME $MNT_DIR/$FILE_REF_1
./write_f -f $MNT_DIR/$FILE_NAME -l $[311*1048576] -w 4096
#kernel panic here.

The reason is that if the ocfs2_extent_rec is the last record
in a leaf extent block, the old solution fails to find the
suitable end cpos. So this patch try to walk through the b-tree,
find the next sub root and get the c_pos the next sub-tree starts
from.

btw, I have runned tristan's test case against the patched kernel
for several days and this type of kernel panic never happens again.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-02 16:14:57 -08:00
Tao Ma 2f48d593b6 ocfs2: duplicate inline data properly during reflink.
The old reflink fails to handle inodes with inline data and will oops
if it encounters them.  This patch copies inline data to the new inode.
Extended attributes may still be refcounted.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
2009-10-28 22:48:23 -07:00
Tao Ma 87f4b1bb98 ocfs2: Move ocfs2_complete_reflink to the right place.
As its name ocfs2_complete_reflink indicates, it should
be called after all the work for reflink is done, so
it really should be called after we reflink xattr
successfully.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
2009-10-28 22:44:19 -07:00
Tao Ma bd50873dc7 ocfs2: Add ioctl for reflink.
The ioctl will take 3 parameters: old_path, new_path and
preserve and call vfs_reflink. It is useful when we backport
reflink features to old kernels.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:51 -07:00
Tao Ma 09bf27a000 ocfs2: Implement ocfs2_reflink.
Implement ocfs2_reflink.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:49 -07:00
Tao Ma 0fe9b66c65 ocfs2: Add preserve to reflink.
reflink has 2 options for the destination file:
1. snapshot: reflink will attempt to preserve ownership, permissions,
   and all other security state in order to create a full snapshot.
2. new file: it will acquire the data extent sharing but will see the
   file's security state and attributes initialized as a new file.

So add the option to ocfs2.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:49 -07:00
Tao Ma 7540c1a77b ocfs2: Don't merge in 1st refcount ops of reflink.
Actually the whole reflink will touch refcount tree 2 times:
1. It will add the clusters in the extent record to the tree if it
   isn't refcounted before.
2. It will add 1 refcount to these clusters when it add these
   extent records to the tree.

So actually we shouldn't do merge in the 1st operation since the 2nd
one will soon be called and we may have to split it again. Do a merge
first and split soon is a waste of time. So we only merge in the 2nd
round. This is done by adding a new internal __ocfs2_increase_refcount
and call it with "not-merge" for 1st refcount operation in reflink.

This also has a side-effect that we don't need to worry too much about
the metadata allocation in the 2nd round since it will only merge and
no split will happen for those records.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:46 -07:00
Tao Ma 2999d12f4d ocfs2: Add reflink support for xattr.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:45 -07:00
Tao Ma 8b2c0dba51 ocfs2: Call refcount tree remove process properly.
Now with xattr refcount support, we need to check whether
we have xattr refcounted before we remove the refcount tree.

Now the mechanism is:
1) Check whether i_clusters == 0, if no, exit.
2) check whether we have i_xattr_loc in dinode. if yes, exit.
2) Check whether we have inline xattr stored outside, if yes, exit.
4) Remove the tree.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:44 -07:00
Tao Ma 0129241e2b ocfs2: Attach xattr clusters to refcount tree.
In ocfs2, when xattr's value is larger than OCFS2_XATTR_INLINE_SIZE,
it will be kept outside of the blocks we store xattr entry. And they
are stored in a b-tree also. So this patch try to attach all these
clusters to refcount tree also.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:43 -07:00
Tao Ma 492a8a33e1 ocfs2: Add CoW support for xattr.
In order to make 2 transcation(xattr and cow) independent with each other,
we CoW the whole xattr out in case we are setting them.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:41 -07:00
Tao Ma 913580b4cd ocfs2: Abstract duplicate clusters process in CoW.
We currently use pagecache to duplicate clusters in CoW,
but it isn't suitable for xattr case. So abstract it out
so that the caller can decide which method it use.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:40 -07:00
Tao Ma a9063ab9a3 ocfs2: handle file attributes issue for reflink.
A reflink creates a snapshot of a file, that means the attributes
must be identical except for three exceptions - nlink, ino, and ctime.

As for time changes, Here is a brief description:

1. Source file:
   1) atime: Ignore. Let the lazy atime code handle that.
   2) mtime: don't touch.
   3) ctime: If we change the tree (adding REFCOUNTED to at least one
             extent), update it.
2. Destination file:
   1) atime: ignore.
   2) mtime: we want it to appear identical to the source.
   3) ctime: update.

The idea here is that an ls -l will show the same time for the
src and target - it shows mtime.  Backup software like rsync and tar
will treat the new file correctly too.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:39 -07:00
Tao Ma 110a045aca ocfs2: Add normal functions for reflink a normal file's extents.
2 major functions are added in this patch.

ocfs2_attach_refcount_tree will create a new refcount tree to the
old file if it doesn't have one and insert all the extent records
to the tree if they are not refcounted.

ocfs2_create_reflink_node will:
1. set the refcount tree to the new file.
2. call ocfs2_duplicate_extent_list which will iterate all the
   extents for the old file, insert it to the new file and increase
   the corresponding referennce count.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:38 -07:00
Tao Ma 37f8a2bfaa ocfs2: CoW a reflinked cluster when it is truncated.
When we truncate a file to a specific size which resides in a reflinked
cluster, we need to CoW it since ocfs2_zero_range_for_truncate will
zero the space after the size(just another type of write).

So we add a "max_cpos" in ocfs2_refcount_cow so that it will stop when
it hit the max cluster offset.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:38 -07:00
Tao Ma 6ae23c5555 ocfs2: CoW refcount tree improvement.
During CoW, if the old extent record is refcounted, we allocate
som new clusters and do CoW. Actually we can have some improvement
here. If the old extent has refcount=1, that means now it is only
used by this file. So we don't need to allocate new clusters, just
remove the refcounted flag and it is OK. We also have to remove
it from the refcount tree while not deleting it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:36 -07:00
Tao Ma 6f70fa5199 ocfs2: Add CoW support.
This patch try CoW support for a refcounted record.

the whole process will be:
1. Calculate how many clusters we need to CoW and where we start.
   Extents that are not completely encompassed by the write will
   be broken on 1MB boundaries.
2. Do CoW for the clusters with the help of page cache.
3. Change the b-tree structure with the new allocated clusters.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:36 -07:00
Tao Ma bcbbb24a6a ocfs2: Decrement refcount when truncating refcounted extents.
Add 'Decrement refcount for delete' in to the normal truncate
process. So for a refcounted extent record, call refcount rec
decrementation instead of cluster free.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:35 -07:00
Tao Ma 1aa75fea64 ocfs2: Add functions for extents refcounted.
Add function ocfs2_mark_extent_refcounted which can mark
an extent refcounted.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:34 -07:00
Tao Ma 1823cb0b9f ocfs2: Add support of decrementing refcount for delete.
Given a physical cpos and length, decrement the refcount
in the tree. If the refcount for any portion of the extent goes
to zero, that portion is queued for freeing.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:33 -07:00
Tao Ma e73a819db9 ocfs2: Add support for incrementing refcount in the tree.
Given a physical cpos and length, increment the refcount
in the tree. If the extent has not been seen before, a refcount
record is created for it. Refcount records may be merged or
split by this operation.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:33 -07:00
Tao Ma 8bf396de98 ocfs2: Basic tree root operation.
Add basic refcount tree root operation.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:30 -07:00
Tao Ma 374a263e79 ocfs2: Add refcount tree lock mechanism.
Implement locking around struct ocfs2_refcount_tree.  This protects
all read/write operations on refcount trees.  ocfs2_refcount_tree
has its own lock and its own caching_info, protecting buffers among
multiple nodes.

User must call ocfs2_lock_refcount_tree before his operation on
the tree and unlock it after that.

ocfs2_refcount_trees are referenced by the block number of the
refcount tree root block, So we create an rb-tree on the ocfs2_super
to look them up.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:29 -07:00
Tao Ma c732eb16bf ocfs2: Add caching info for refcount tree.
refcount tree should use its own caching info so that when
we downconvert the refcount tree lock, we can drop all the
cached buffer head.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:28 -07:00
Tao Ma f2c870e3b1 ocfs2: Add ocfs2_read_refcount_block.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:26 -07:00