Commit Graph

45 Commits

Author SHA1 Message Date
Trond Myklebust 2e928e4878 NFSv4.1: Declare osd_pri_2_pnfs_err(), objio_init_read/write to be static
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-16 12:38:00 -04:00
Peng Tao 6296556f0b NFS41: send real write size in layoutget
For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-isize as layoutget length.

For direct write, both block layout and object layout use dreq->bytes_left.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-08 19:32:22 -04:00
Boaz Harrosh 7de6e28417 pnfs-obj: Better IO pattern in case of unaligned offset
Depending on layout and ARCH, ORE has some limits on max IO sizes
which is communicated on (what else) ore_layout->max_io_length,
which is always stripe aligned.
This was considered as the pg_test boundary for splitting and starting
a new IO.

But in the case of a long IO where the start offset is not aligned
what would happen is that both end of IO[N] and start of IO[N+1]
would be unaligned, causing each IO boundary parity unit to be
calculated and written twice.

So what we do in this patch is split the very start of an unaligned
IO, up to a stripe boundary, and then next IO's can continue fully
aligned til the end.

We might be sacrificing the case where the full unaligned IO would
fit within a single max_io_length, but the sacrifice is well worth
the elimination of double calculation and parity units IO.
Actually the sacrificing is marginal and is almost unmeasurable.

TODO:
	If we know the total expected linear segment that will
	be received, at pg_init, we could use that information
	in many places:
	1. blocks-layout get_layout write segment size
	2. Better mds-threshold
	3. In above situation for a better clean split

	I will do this in future submission.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-08-02 17:42:51 -04:00
Boaz Harrosh c999ff6802 pnfs-obj: Fix __r4w_get_page when offset is beyond i_size
It is very common for the end of the file to be unaligned on
stripe size. But since we know it's beyond file's end then
the XOR should be preformed with all zeros.

Old code used to just read zeros out of the OSD devices, which is a great
waist. But what scares me more about this situation is that, we now have
pages attached to the file's mapping that are beyond i_size. I don't
like the kind of bugs this calls for.

Fix both birds, by returning a global zero_page, if offset is beyond
i_size.

TODO:
	Change the API to ->__r4w_get_page() so a NULL can be
	returned without being considered as error, since XOR API
	treats NULL entries as zero_pages.

[Bug since 3.2. Should apply the same way to all Kernels since]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-07-20 11:50:31 +03:00
Boaz Harrosh 9909d45a85 pnfs-obj: don't leak objio_state if ore_write/read fails
[Bug since 3.2 Kernel]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-07-20 11:50:30 +03:00
Trond Myklebust 1385b81173 NFS: Fix sparse warnings
Fix the following sparse warnings:

fs/nfs/direct.c:221:6: warning: symbol 'nfs_direct_readpage_release' was
not declared. Should it be static?
fs/nfs/read.c:38:43: warning: non-ANSI function declaration of function
'nfs_readhdr_alloc'
fs/nfs/objlayout/objio_osd.c:214:5: warning: symbol '__alloc_objio_seg'
was not declared. Should it be static?

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
2012-05-04 14:59:51 -04:00
Fred Isaman cd841605f7 NFS: create common nfs_pgio_header for both read and write
In order to avoid duplicating all the data in nfs_read_data whenever we
split it up into multiple RPC calls (either due to a short read result
or due to rsize < PAGE_SIZE), we split out the bits that are the same
per RPC call into a separate "header" structure.

The goal this patch moves towards is to have a single header
refcounted by several rpc_data structures.  Thus, want to always refer
from rpc_data to the header, and not the other way.  This patch comes
close to that ideal, but the directio code currently needs some
special casing, isolated in the nfs_direct_[read_write]hdr_release()
functions.  This will be dealt with in a future patch.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27 14:10:37 -04:00
Sachin Bhamare 9526b2b6d6 pnfs-obj: Remove unused variable from objlayout_get_deviceinfo()
Local variable 'sb' was not being used in objlayout_get_deviceinfo().

Signed-off-by: Sachin Bhamare <sbhamare@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-26 12:15:51 -04:00
Sachin Bhamare 18d98f6c04 pnfs-obj: autologin: Add support for protocol autologin
The pnfs-objects protocol mandates that we autologin into devices not
present in the system, according to information specified in the
get_device_info returned from the server.

The Protocol specifies two login hints.
1. An IP address:port combination
2. A string URI which is constructed as a URL with a protocol prefix
   followed by :// and a string as address. For each  protocol prefix
   the string-address format might be different.

We only support the second option. The first option is just redundant
to the second one.
NOTE: The Kernel part of autologin does not parse the URI string. It
just channels it to a user-mode script. So any new login protocols should
only update the user-mode script which is a part of the nfs-utils package,
but the Kernel need not change.

We implement the autologin by using the call_usermodehelper() API.
(Thanks to Steve Dickson <steved@redhat.com> for pointing it out)
So there is no running daemon needed, and/or special setup.

We Add the osd_login_prog Kernel module parameters which defaults to:
	/sbin/osd_login

Kernel try's to upcall the program specified in osd_login_prog. If the file is
not found or the execution fails Kernel will disable any farther upcalls, by
zeroing out  osd_login_prog, Until Admin re-enables it by setting the
osd_login_prog parameter to a proper program.

Also add text about the osd_login program command line API to:
	Documentation/filesystems/nfs/pnfs.txt
and documentation of the new  osd_login_prog  module parameter to:
	Documentation/kernel-parameters.txt

TODO: Add timeout option in the case osd_login program gets
              stuck

Signed-off-by: Sachin Bhamare <sbhamare@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-21 09:31:47 -04:00
Boaz Harrosh 5318a29c19 pnfs-obj: Uglify objio_segment allocation for the sake of the principle :-(
At some past instance Linus Trovalds wrote:
> From: Linus Torvalds <torvalds@linux-foundation.org>
> commit a84a79e4d3 upstream.
>
> The size is always valid, but variable-length arrays generate worse code
> for no good reason (unless the function happens to be inlined and the
> compiler sees the length for the simple constant it is).
>
> Also, there seems to be some code generation problem on POWER, where
> Henrik Bakken reports that register r28 can get corrupted under some
> subtle circumstances (interrupt happening at the wrong time?).  That all
> indicates some seriously broken compiler issues, but since variable
> length arrays are bad regardless, there's little point in trying to
> chase it down.
>
> "Just don't do that, then".

Since then any use of "variable length arrays" has become blasphemous.
Even in perfectly good, beautiful, perfectly safe code like the one
below where the variable length arrays are only used as a sizeof()
parameter, for type-safe dynamic structure allocations. GCC is not
executing any stack allocation code.

I have produced a small file which defines two functions main1(unsigned numdevs)
and main2(unsigned numdevs). main1 uses code as before with call to malloc
and main2 uses code as of after this patch. I compiled it as:
	gcc -O2 -S see_asm.c
and here is what I get:

<see_asm.s>
main1:
.LFB7:
	.cfi_startproc
	mov	%edi, %edi
	leaq	4(%rdi,%rdi), %rdi
	salq	$3, %rdi
	jmp	malloc
	.cfi_endproc
.LFE7:
	.size	main1, .-main1
	.p2align 4,,15
	.globl	main2
	.type	main2, @function
main2:
.LFB8:
	.cfi_startproc
	mov	%edi, %edi
	addq	$2, %rdi
	salq	$4, %rdi
	jmp	malloc
	.cfi_endproc
.LFE8:
	.size	main2, .-main2
	.section	.text.startup,"ax",@progbits
	.p2align 4,,15
</see_asm.s>

*Exact* same code !!!

So please seriously consider not accepting this patch and leave the
perfectly good code intact.

CC: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-13 23:47:59 -04:00
Trond Myklebust 17280175c5 NFS: Fix a number of sparse warnings
Fix a number of "warning: symbol 'foo' was not declared. Should it be
static?" conditions.

Fix 2 cases of "warning: Using plain integer as NULL pointer"

fs/nfs/delegation.c:263:31: warning: restricted fmode_t degrades to integer
  - We want to allow upgrades to a WRITE delegation, but should otherwise
    consider servers that hand out duplicate delegations to be borken.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-11 15:14:16 -04:00
Weston Andros Adamson a030889a01 NFS: start printks w/ NFS: even if __func__ shown
This patch addresses printks that have some context to show that they are
from fs/nfs/, but for the sake of consistency now start with NFS:

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-06 18:48:00 -05:00
Boaz Harrosh fe0fe83585 pnfs-obj: Must return layout on IO error
As mandated by the standard. In case of an IO error, a pNFS
objects layout driver must return it's layout. This is because
all device errors are reported to the server as part of the
layout return buffer.

This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR
is done, through a bit flag on the pnfs_layoutdriver_type->flags
member. The flag is set by the layout driver that wants a
layout_return preformed at pnfs_ld_{write,read}_done in case
of an error.
(Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr
 because this code is never called outside of pnfs.c and pnfs IO
 paths)

Without this patch 3.[0-2] Kernels leak memory and have an annoying
WARN_ON after every IO error utilizing the pnfs-obj driver.

[This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-06 08:55:33 -05:00
Boaz Harrosh 5c0b4129c0 pnfs-obj: pNFS errors are communicated on iodata->pnfs_error
Some time along the way pNFS IO errors were switched to
communicate with a special iodata->pnfs_error member instead
of the regular RPC members. But objlayout was not switched
over.

Fix that!
Without this fix any IO error is hanged, because IO is not
switched to MDS and pages are never cleared or read.

[Applies to 3.2.0. Same bug different patch for 3.1/0 Kernels]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-01-06 08:55:23 -05:00
Boaz Harrosh 278c023a99 pnfs-obj: Support for RAID5 read-4-write interface.
The ore need suplied a r4w_get_page/r4w_put_page API
from Filesystem so it can get cache pages to read-into when
writing parial stripes.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:09 -04:00
Boaz Harrosh 04291b628c pnfs-obj: move to ore 03: Remove old raid engine
Finally remove all the old raid engine, which is by now
dead code.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:08 -04:00
Boaz Harrosh eecfc6312a pnfs-obj: move to ore 02: move to ORE
In this patch we are actually moving to the ORE.
(Object Raid Engine).

objio_state holds a pointer to an ore_io_state. Once
we have an ore_io_state at hand we can call the ore
for reading/writing. We register on the done path
to kick off the nfs io_done mechanism.

Again for Ease of reviewing the old code is "#if 0"
but is not removed so the diff command works better.
The old code will be removed in the next patch.

fs/exofs/Kconfig::ORE is modified to also be auto-included
if PNFS_OBJLAYOUT is set. Since we now depend on ORE.
(See comments in fs/exofs/Kconfig)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:08 -04:00
Boaz Harrosh af4f5b54bc pnfs-obj: move to ore 01: ore_layout & ore_components
For Ease of reviewing I split the move to ore into 3 parts
	move to ore 01: ore_layout & ore_components
	move to ore 02: move to ORE
	move to ore 03: Remove old raid engine

This patch modifies the objio_lseg, layout-segment level
and devices and components arrays to use the ORE types.

Though it will be removed soon, also the raid engine
is modified to actually compile, possibly run, with
the new types. So it is the same old raid engine but
with some new ORE types.

For Ease of reviewing, some of the old code is
"#if 0" but is not removed so the diff command works
better. The old code will be removed in the 3rd patch.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:07 -04:00
Boaz Harrosh e2e04355d9 pnfs-obj: Rename objlayout_io_state => objlayout_io_res
* All instances of objlayout_io_state => objlayout_io_res
* All instances of state => oir;
* All instances of ol_state => oir;

Big but nothing to it

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:06 -04:00
Boaz Harrosh 96218556b0 pnfs-obj: Get rid of objlayout_{alloc,free}_io_state
This is part of moving objio_osd to use the ORE.

objlayout_io_state had two functions:
1. It was used in the error reporting mechanism at layout_return.
   This function is kept intact.
   (Later patch will rename objlayout_io_state => objlayout_io_res)
2. Carrier of rw io members into the objio_read/write_paglist API.
   This is removed in this patch.

The {r,w}data received from NFS are passed directly to the
objio_{read,write}_paglist API. The io_engine is now allocating
it's own IO state as part of the read/write. The minimal
functionality that was part of the generic allocation is passed
to the io_engine.

So part of this patch is rename of:
	ios->ol_state.foo => ios->foo

At objlayout_{read,write}_done an objlayout_io_state is passed that
denotes the result of the IO. (Hence the later name change).
If the IO is successful objlayout calls an objio_free_result() API
immediately (Which for objio_osd causes the release of the io_state).
If the IO ended in an error it is hanged onto until reported in
layout_return and is released later through the objio_free_result()
API. (All this is not new just renamed and cleaned)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:05 -04:00
Boaz Harrosh e6c40fe3f4 pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelist
objlayout driver was always returning PNFS_ATTEMPTED from it's
read/write_pagelist operations. Even on error. Fix that.

Start by establishing an error return API from io-engine, by
not returning ssize_t (length-or-error) but returning "int"
0=OK, 0>Error. And clean up all return types in io-engine.

Then if io-engine returned error return PNFS_NOT_ATTEMPTED
to generic layer. (With a dprint)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:03 -04:00
Boaz Harrosh 4cdc685c7d pnfs-obj: Remove redundant EOF from objlayout_io_state
The EOF calculation was done on .read_pagelist(), cached
in objlayout_io_state->eof, and set in objlayout_read_done()
into nfs_read_data->res.eof.

So set it directly into nfs_read_data->res.eof and avoid
the extra member.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:00 -04:00
Boaz Harrosh 9af7db3228 pnfs-obj: Fix the comp_index != 0 case
There were bugs in the case of partial layout where olo_comp_index
is not zero. This used to work and was tested but one of the later
cleanup SQUASHMEs broke it and was not tested since.

Also add a dprint that specify those received layout parameters.
Everything else was already printed.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-08-04 11:54:48 -04:00
Boaz Harrosh 20618b21da pnfs-obj: Bug when we are running out of bio
When we have a situation that the number of pages we want
to encode is bigger then the size of the bio. (Which can
currently happen only when all IO is going to a single device
.e.g group_width==1) then the IO is submitted short and we
report back only the amount of bytes we actually wrote/read
and all is fine. BUT ...

There was a bug that the current length counter was advanced
before the fail to add the extra page, and we come to a situation
that the CDB length was one-page longer then the actual bio size,
which is of course rejected by the osd-target.

While here also fix the bio size calculation, in the case
that we received more then one group of devices.

CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-08-04 11:54:38 -04:00
J. Bruce Fields f85ef69ce0 pnfs: simplify pnfs files module autoloading
Embed the necessary alias into the module rather than waiting for
someone to add it to /etc/modprobe.conf

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15 19:21:58 -04:00
Trond Myklebust dce81290ee NFS: Move the pnfs write code into pnfs.c
...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15 09:12:22 -04:00
Trond Myklebust 493292ddc7 NFS: Move the pnfs read code into pnfs.c
...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-15 09:12:21 -04:00
Trond Myklebust e885de1a5b NFSv4.1: Fall back to ordinary i/o through the mds if we have no layout segment
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12 13:40:28 -04:00
Trond Myklebust d8007d4dd6 NFSv4.1: Add an initialisation callback for pNFS
Ensure that we always get a layout before setting up the i/o request.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12 13:40:28 -04:00
Trond Myklebust 1751c3638f NFS: Cleanup of the nfs_pageio code in preparation for a pnfs bugfix
We need to ensure that the layouts are set up before we can decide to
coalesce requests. To do so, we want to further split up the struct
nfs_pageio_descriptor operations into an initialisation callback, a
coalescing test callback, and a 'do i/o' callback.

This patch cleans up the existing callback methods before adding the
'initialisation' callback.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12 13:40:28 -04:00
Trond Myklebust 8f7d5efbef NFSv4.1: Fix some issues with pnfs_generic_pg_test
1. If the intention is to coalesce requests 'prev' and 'req' then we
   have to ensure at least that we have a layout starting at
   req_offset(prev).

2. If we're only requesting a minimal layout of length desc->pg_count,
   we need to test the length actually returned by the server before
   we allow the coalescing to occur.

3. We need to deal correctly with (pgio->lseg == NULL)

4. Fixup the test guarding the pnfs_update_layout.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-21 11:54:05 -04:00
Boaz Harrosh df18d127f4 pnfs-obj: No longer needed to take an extra ref at add_device
Andy's last device_cache patches, already take an extra
reference on the newly inserted device_id. So we can remove it
from obj-io.

Without this patch the device_ids are leaked.

Andy's patches are not in Linus tree yet. So I'm not sure if they are
scheduled for this Kernel or the next. This patch should be added as
part of these.

CC: Andy Adamson <andros@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-19 14:49:51 -04:00
David Howells c7fd06228b NFS: (d)printks should use %zd for ssize_t arguments
(d)printks should use %zd for ssize_t arguments not %ld, otherwise they might
get a warning.  I see the following with MN10300.

fs/nfs/objlayout/objlayout.c: In function 'objlayout_read_done':
fs/nfs/objlayout/objlayout.c:294: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t'

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Trond Myklebust <Trond.Myklebust@netapp.com>
cc: linux-nfs@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15 11:24:31 -04:00
Boaz Harrosh 9342077011 pnfs-obj: pg_test check for max_io_size
Implement pg_test vector to test for max IO sizes. We calculate
a max_io_size member only once, and cache it in lseg so to not
do so on every page insert.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[simplify logic]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 21:03:08 +03:00
Benny Halevy 89a58e32d9 NFSv4.1: use pnfs_generic_pg_test directly by layout driver
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:56:55 +03:00
Benny Halevy 18ad0a9f2c NFSv4.1: change pg_test return type to bool
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:56:54 +03:00
Boaz Harrosh a0fe8bf427 pnfs-obj: objlayout_encode_layoutcommit implementation
* Define API for io-engines to report delta_space_used in IOs
* Encode the osd-layout specific information of the layoutcommit
  XDR buffer.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:55:00 +03:00
Boaz Harrosh adb58535e6 pnfs-obj: report errors and .encode_layoutreturn Implementation.
An io_state pre-allocates an error information structure for each
possible osd-device that might error during IO. When IO is done if all
was well the io_state is freed. (as today). If the I/O has ended with an
error, the io_state is queued on a per-layout err_list. When eventually
encode_layoutreturn() is called, each error is properly encoded on the
XDR buffer and only then the io_state is removed from err_list and
de-allocated.

It is up to the io_engine to fill in the segment that fault and the type
of osd_error that occurred. By calling objlayout_io_set_result() for
each failing device.

In objio_osd:
* Allocate io-error descriptors space as part of io_state
* Use generic objlayout error reporting at end of io.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:54:45 +03:00
Benny Halevy 8a1636c459 pnfs: layoutret_on_setattr
With the objects layout security model, we have object capabilities
that are associated with the layout and we anticipate that the server
will issue a cb_layoutrecall for any setattr that changes security
related attributes (user/group/mode/acl) or truncates the file.

Therefore, the layout is returned before issuing the setattr to avoid
the anticipated cb_layoutrecall.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:54:36 +03:00
Boaz Harrosh 04f8345038 pnfs-obj: osd raid engine read/write implementation
With the use of the in-kernel osd library. Implement read/write
of data from/to osd-objects according to information specified
in the objects-layout.

Support for stripping over mirrors with a received stripe_unit.
There are however a few constrains which are not supported:
 1. Stripe Unit must be a multiple of PAGE_SIZE
 2. stripe length (stripe_unit * number_of_stripes) can not be
    bigger then 32bit.

Also support raid-groups and partial-layout. Partial-layout is
when not all the groups are received on the line, addressing
only a partial range of the file.

TODO:
  Only raid0! raid 4/5/6 support will come at later stage

A none supported layout will send IO through the MDS

[Important fallout from the last rebase]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:54:15 +03:00
Benny Halevy e51b841dd0 pnfs-obj: define per-inode private structure
allocate and deallocate per-inode private pnfs_layout_hdr
in preparation for I/O implementation.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:53:51 +03:00
Boaz Harrosh b6c05f1693 pnfs-obj: objio_osd device information retrieval and caching
When a new layout is received in objio_alloc_lseg all device_ids
referenced are retrieved. The device information is queried for from MDS
and then the osd_device is looked-up from the osd-initiator library. The
devices are cached in a per-mount-point list, for later use. At unmount
all devices are "put" back to the library.

objlayout_get_deviceinfo(), objlayout_put_deviceinfo() middleware
API for retrieving device information given a device_id.

TODO: The device cache can get big. Cap its size. Keep an LRU and start
      to return devices which were not used, when list gets to big, or
      when new entries allocation fail.

[pnfs-obj: Bugs in new global-device-cache code]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[use global device cache]
[use layout driver in global device cache]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:53:33 +03:00
Boaz Harrosh 09f5bf4e6d pnfs-obj: decode layout, alloc/free lseg
objlayout_alloc_lseg prepares an xdr_stream and calls the
raid engins objio_alloc_lseg() to allocate a private
pnfs_layout_segment.

objio_osd.c::objio_alloc_lseg() uses passed xdr_stream to
decode and store the layout_segment information in an
objio_segment struct, using the pnfs_osd_xdr.h API for
the actual parsing the layout xdr.

objlayout_free_lseg calls objio_free_lseg() to free the
allocated space.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[gfp_flags]
[removed "extern" from function definitions]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:53:06 +03:00
Boaz Harrosh f1bc893a89 pnfs-obj: pnfs_osd XDR client implementation
* Add the fs/nfs/objlayout/pnfs_osd_xdr_cli.c file, which will
  include the XDR encode/decode implementations for the pNFS
  client objlayout driver.

[Wrong type in comments]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:52:36 +03:00
Benny Halevy c93407d03c pnfs-obj: objlayoutdriver module skeleton
* Define the PNFS_OBJLAYOUT Kconfig option in the nfs
  master Kconfig file.
* Add the objlayout driver to the Kernel's Kbuild system.
* Add the fs/nfs/objlayout/Kbuild file for building the
  objlayoutdriver.ko driver
* Define fs/nfs/objlayout/objio_osd.c, register the driver on module
  initialization and unregister on exit.

[pnfs-obj: remove of CONFIG_PNFS fallout]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[added "unsure" clause]
[depend on NFS_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29 20:52:35 +03:00