Commit Graph

57 Commits

Author SHA1 Message Date
Mika Westerberg 81a1209c90 mtd: spi-nor: Add support for Macronix mx25u6435f serial flash
Add Macronix (mx25u6435f) 8MB flash to the list of supported chips.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05 19:09:10 -07:00
Mika Westerberg e88e567f15 mtd: spi-nor: Add support for Winbond w25q64dw serial flash
Add Winbond (w25q64dw) 8MB flash to the list of supported chips.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05 19:09:08 -07:00
Gabor Juhos 40d19ab69c mtd: spi-nor: add support for the Winbond W25X05 flash
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05 18:56:21 -07:00
Shengzhou Liu 072b56ab86 mtd: spi-nor: support en25s64 device
Add support for EON en25s64 SPI flash.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05 18:56:21 -07:00
Nicholas Mc Guire 219a8d13dd mtd: fsl-quadspi: cleanup wait_for_completion return handling
return type of wait_for_completion_timeout is unsigned long not int, this
patch uses the return value of wait_for_completion_timeout in the condition
directly rather than adding a additional appropriately typed variable.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:08:04 -07:00
Fabio Estevam dc6525c61f mtd: fsl-quadspi: Print the error value
When displaying dev_err() messages it is useful to print the error value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Han Xu <han.xu@freescale.com>
[Brian: fix up "can not" at the same time]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:03:33 -07:00
Brian Norris 8cc7f33aad mtd: spi-nor: factor out replace-able flash_{lock,unlock}
Flash lock/unlock is a flash-specific operations. Factor out a callback
for it to more readily support other vendors.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: VIET NGA DAO <vndao@altera.com>
2015-03-27 10:37:38 -07:00
Allen Xu 4e898ce7d9 mtd: fsl-quadspi: improve read performance by increase AHB transfer size
Set AHB transfer size to 1K which improved the read performance.

Add ahb_buf_size field in fsl_qspi_devtype_data to denote the size for
different SoC.

Before:

root@imx6qdlsolo:~# dd if=/dev/mtd1 of=/dev/null bs=1M count=16
16+0 records in
16+0 records out
16777216 bytes (17 MB) copied, 0.472183 s, 25.1 MB/s

After:

root@imx6qdlsolo:~# dd if=/dev/mtd1 of=/dev/null bs=1M count=16
16+0 records in
16+0 records out
16777216 bytes (17 MB) copied, 0.369439 s, 29.5 MB/s

Signed-off-by: Allen Xu <b45815@freescale.com>
Signed-off-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Huang Shijie <shijie.huang@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-05 20:01:08 -08:00
Fabio Estevam b1ab474fda mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
There is no need to keep the 'map_failed' label. We can simply return the error
code directly and let the code shorter and cleaner.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-05 19:51:40 -08:00
Fabio Estevam 50131b73de mtd: fsl-quadspi: Remove unneeded success/error messages
When the driver successfully probe we already have messages like:

[    1.140989] fsl-quadspi 21e4000.qspi: s25fl128s (16384 Kbytes)
[    1.150902] fsl-quadspi 21e4000.qspi: s25fl128s (16384 Kbytes)

Or in case of error:

[    1.175920] fsl-quadspi: probe of 21e4000.qspi failed with error -12

, so remove the unneeded success/error messages.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-05 19:51:36 -08:00
Fabio Estevam e4ca684083 mtd: fsl-quadspi: Fix the error paths
Jumping to 'map_failed' label is not correct at these points, as it misses to
disable the clocks that were previously enabled.

Jump to 'irq_failed' label instead that will correctly disable the clocks.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-05 19:51:27 -08:00
Fabio Estevam cfe4af3aac mtd: fsl-quadspi: Fix module unbound
When removing the fsl-quadspi module and running 'cat /proc/mtd' afterwards,
we see garbage data like:

$ rmmod  fsl-quadspi
$ cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00000000 00000000 "(null)"
mtd0: 00000000 00000000 "(null)"
mtd0: 00000000 00000000 "(null)"
...
mtd0: a22296c6c756e28 00000000 "(null)"
mtd0: a22296c6c756e28 3064746d "(null)"

If we continue doing multiple module load/unload operations, then it will also
lead to a kernel crash.

The reason for this is due to the wrong mtd index used in
mtd_device_unregister() in the remove function.

We need to keep the mtd unregister index aligned with the one used in the probe
function, which means we need to take into account the 'has_second_chip'
property. By doing so we can guarantee that the mtd index is the same in the
registration and unregistration functions.

With this patch applied we can load/unload the fsl-quadspi driver several times
and it will result in no crash.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Huang Shijie <shijie.huang@intel.com>
Tested-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Allen Xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-20 12:37:57 -08:00
Rafał Miłecki fcc87a9519 mtd: spi-nor: support for (GigaDevice) GD25Q128B
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-20 12:24:43 -08:00
Allen Xu 45c6a0caeb mtd: spi-nor: fsl-qspi: support deep sleep mode for imx6 sx chip
i.mx6 sx support turn off fastmix and megamix power.
qpsi controller can be turned off and all status lost when suspend/resume.
add suspend/resume functions and reset qspi controller when resume.

Signed-off-by: Allen Xu <b45815@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Acked-by: Huang Shijie <shijie.huang@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-15 19:30:30 -08:00
Bean Huo 霍斌斌 (beanhuo) 548cd3ab54 mtd: spi-nor: Add quad I/O support for Micron SPI NOR
This patch adds code which enables Quad I/O mode on Micron SPI NOR flashes.

For Micron SPI NOR flash, enabling or disabling quad I/O protocol can be
done By two methods, which are to use EVCR (Enhanced Volatile
Configuration Register) and the ENTER QUAD I/O MODE command. There is no
difference between these two methods. Unfortunately, for some Micron SPI
NOR flashes, there no ENTER Quad I/O command (35h), such as n25q064. But
for all current Micron SPI NOR, if it support quad I/O mode, using EVCR
definitely be supported. It is a recommended method to enable Quad I/O
mode by EVCR, Quad I/O protocol bit 7. When EVCR bit 7 is reset to 0,
the SPI NOR flash will operate in quad I/O mode.

This patch has been tested on N25Q512A and MT25TL256BAA1ESF. Micron SPI
NOR of spi_nor_ids[] table all support this method.

Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-07 11:33:22 -08:00
Linus Torvalds d6666be6f0 MTD updates for 3.19:
* Add device tree support for DoC3
 
  * SPI NOR:
 
     Refactoring, for better layering between spi-nor.c and its driver users
     (e.g., m25p80.c)
 
     New flash device support
 
     Support 6-byte ID strings
 
  * NAND
 
     New NAND driver for Allwinner SoC's (sunxi)
 
     GPMI NAND: add support for raw (no ECC) access, for testing purposes
 
     Add ATO manufacturer ID
 
     A few odd driver fixes
 
  * MTD tests:
 
     Allow testers to compensate for OOB bitflips in oobtest
 
     Fix a torturetest regression
 
  * nandsim: Support longer ID byte strings
 
 And more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUj6PbAAoJEFySrpd9RFgtahcP/RGvknk9lnitaZI7+aZPP8Zs
 AopfiuisLNv3v87EEBAWGYjRYm6vuuhO1z3K55iOIlemBVzoMIP0jf68XGy9uXnL
 Ox6AHqxm55wwmc+CHry5/GssaqE6GzdPm8TBP+AGGNhHrhc+raJL55R0QJaoYVwX
 pUxkhWaa4lZ6CrOIMQ3n+MEnduilHZoFIcXSc1UtI0y9IXsf1m0Qs8M5jGN8BQ16
 HOVNJN9wOXF89swoi7bKsyAn+QFUYgdksAisncb6b9r5Ks5KHmcOuS1LM5X9YoUr
 KfeogHfDM68fcaHsSvMU1xmxjXGtE+HFJE52eYNPB1fNbT3JAC13FFj92GeSsZtE
 ekpCQh4OPLazT/2wCUHTQwC7T1dCilwyW7VJB9MSl7fSBo9P7jIiUHxVUdM43kez
 Di02/XWi4IULTwrgzZiTT8yplFrVdvkmKHAAFEIoaVWiF/l4DeSodLGUw7owmNYn
 rJPBPQulpPHRwKZY7gThJuOUXpgbT715GSbvmPYXimHBqmViiPkrhqQ/b/v4PRRs
 Nlfhwbswr7WBq6vmPkd6eOyfdFANmWcZQMp/++BCdI/7mhfaik72GWMTBSuJ7hN5
 PB+z95soHaKBWlbiDGGGPvuqJmPkOVq1R8itQdIYBWEh7eNSHecwVxyUJJ+V3oPv
 QkD7mEP2ZozZe3Ys2EJQ
 =gDW8
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "Summary:
   - Add device tree support for DoC3

   - SPI NOR:
        Refactoring, for better layering between spi-nor.c and its
        driver users (e.g., m25p80.c)

        New flash device support

        Support 6-byte ID strings

   - NAND:
        New NAND driver for Allwinner SoC's (sunxi)

        GPMI NAND: add support for raw (no ECC) access, for testing
        purposes

        Add ATO manufacturer ID

        A few odd driver fixes

   - MTD tests:
        Allow testers to compensate for OOB bitflips in oobtest

        Fix a torturetest regression

   - nandsim: Support longer ID byte strings

  And more"

* tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits)
  mtd: tests: abort torturetest on erase errors
  mtd: physmap_of: fix potential NULL dereference
  mtd: spi-nor: allow NULL as chip name and try to auto detect it
  mtd: nand: gpmi: add raw oob access functions
  mtd: nand: gpmi: add proper raw access support
  mtd: nand: gpmi: add gpmi_copy_bits function
  mtd: spi-nor: factor out write_enable() for erase commands
  mtd: spi-nor: add support for s25fl128s
  mtd: spi-nor: remove the jedec_id/ext_id
  mtd: spi-nor: add id/id_len for flash_info{}
  mtd: nand: correct the comment of function nand_block_isreserved()
  jffs2: Drop bogus if in comment
  mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy
  mtd: cafe_nand: drop duplicate .write_page implementation
  mtd: m25p80: Add support for serial flash Spansion S25FL132K
  MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids
  mtd: spi-nor: improve wait-till-ready timeout loop
  mtd: delete unnecessary checks before two function calls
  mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  mtd: nand: add ATO manufacturer info
  ...
2014-12-17 09:59:26 -08:00
Rafał Miłecki 58c81957b7 mtd: spi-nor: allow NULL as chip name and try to auto detect it
This will allow spi-nor users to plainly use JEDEC to detect flash chip.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-12-01 10:21:42 -08:00
Brian Norris 05241aead9 mtd: spi-nor: factor out write_enable() for erase commands
write_enable() was being duplicated to both m25p80.c and fsl-quadspi.c.
But this should be handled within the spi-nor abstraction layer.

At the same time, let's add write_disable() after erasing, so we don't
leave the flash in a write-enabled state afterward.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <shijie.huang@intel.com>
2014-12-01 00:19:03 -08:00
Huang Shijie 6d7604e517 mtd: spi-nor: add support for s25fl128s
We need to store the six bytes ID for s25fl128s, since it shares the same
five bytes with s25fl129p1.

This patch adds a macro INFO6 which is used for the six bytes ID flash, and adds
a new item for the s25fl128s.

Signed-off-by: Huang Shijie <shijie.huang@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-12-01 00:15:18 -08:00
Huang Shijie d928a25938 mtd: spi-nor: remove the jedec_id/ext_id
The "id" array contains all the information about the JEDEC and the
manufacturer ID info. This patch removes the jedec_id/ext_id from
flash_info.

Signed-off-by: Huang Shijie <shijie.huang@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-12-01 00:10:39 -08:00
Huang Shijie 09ffafb697 mtd: spi-nor: add id/id_len for flash_info{}
This patch adds the id/id_len fields for flash_info{}, and rewrite the
INFO to fill them. And at last, we read out 6 bytes in the spi_nor_read_id(),
and we use these new fields to parse out the correct flash_info.

Signed-off-by: Huang Shijie <shijie.huang@intel.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-12-01 00:05:00 -08:00
Knut Wohlrab 3e38933dd8 mtd: m25p80: Add support for serial flash Spansion S25FL132K
Signed-off-by: Knut Wohlrab <knut.wohlrab@de.bosch.com>
Signed-off-by: Alison Chaiken <alison_chaiken@mentor.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-25 23:11:24 -08:00
Brian Norris a95ce92e4b mtd: spi-nor: improve wait-till-ready timeout loop
There are a few small issues with the timeout loop in
spi_nor_wait_till_ready():

 * The first operation should not be a reschedule; we should check the
   status register at least once to see if we're complete!

 * We should check the status register one last time after declaring the
   deadline has passed, to prevent a premature timeout error (this is
   theoretically possible if we sleep for a long time after the previous
   status register check).

 * Add an error message, so it's obvious if we ever hit a timeout.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <shijie.huang@intel.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
2014-11-25 22:51:23 -08:00
Harini Katakam f02985b785 mtd: spi-nor: Add support for SST spi flash
Add sst25wf080 to the spi-nor device id table.

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05 13:06:02 -08:00
Rostislav Lisovy ce56ce7da3 mtd: spi-nor: Add support for Fujitsu MB85RS1MT FRAM
Tested with this particular FRAM chip

Signed-off-by: Rostislav Lisovy <lisovy@merica.cz>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05 13:04:38 -08:00
Chunhe Lan 4414d3efe5 mtd: spi-nor: Move n25q032 entry to Micron devices list
Because n25q032 is the Micron SPI chip, move it to Micron
devices list group. In order that know which Micron SPI
chips have been support at a glance.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Huang Shijie <shijie8@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05 12:58:38 -08:00
Brian Norris b94ed08774 mtd: spi-nor: drop replaceable wait-till-ready function pointer
We don't need to expose a 'wait-till-ready' interface to drivers. Status
register polling should be handled by the core spi-nor.c library, and as
of now, I see no need to provide a special driver-specific hook for it.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05 02:08:21 -08:00
Brian Norris 8fdc6cd458 mtd: fsl-quadspi: drop wait-till-ready checks
spi-nor.c should be taking care of these now.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Huang Shijie <b32955@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05 02:08:21 -08:00
Brian Norris dfa9c0cba4 mtd: spi-nor: move "wait-till-ready" checks into erase/write functions
We shouldn't have *every* function checking if a previous write is
complete; this should be done synchronously after each write/erase.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-05 02:02:24 -08:00
Brian Norris 1d61dcb3ff mtd: spi-nor: handle timeout errors in spi_nor_write()
The error label was unused here. It looks like we're missing at least
one case that should be doing 'goto write_err'.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Huang Shijie <shijie8@gmail.com>
2014-11-05 02:02:20 -08:00
Brian Norris 51983b7dcf mtd: spi-nor: eliminate duplicate spi_nor_wait_till_{, fsr}_ready() code
These functions were near-carbon-copies due to a small per-flash quirk.
Let's add a new spi_nor::flags bitfield to support these types of
quirks.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Graham Moore <grmoore@altera.com>
Cc: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05 02:01:32 -08:00
Huang Shijie 0b78a2cf2a mtd: spi-nor: fix the wrong dummy value
For the DDR Quad read, the dummy cycles maybe 3 or 6 which is less then 8.
The dummy cycles is actually 8 for SPI fast/dual/quad read.

This patch makes preparations for the DDR quad read, it fixes the wrong dummy
value for both the spi-nor.c and m25p80.c.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-05 00:26:06 -08:00
Greg Kroah-Hartman a8a93c6f99 Merge branch 'platform/remove_owner' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next
Remove all .owner fields from platform drivers
2014-11-03 19:53:56 -08:00
Fabio Estevam 77adc085ae mtd: fsl-quadspi: Let the clocks error path be clearer
When clk_prepare_enable(q->clk) fails it is clearer to disable the previous
acquired clock (q->clk_en) in the error path rather than doing it locally.

So disable q->clk_en in the error path only.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22 01:35:41 -07:00
Fabio Estevam b26171e392 mtd: fsl-quadspi: Propagate the error from of_modalias_node()
The 'map_failed' label will return 'ret', so we need to assign the error
code to 'ret', otherwise the probe function will return success.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22 01:35:41 -07:00
Ben Hutchings e66fcf722a spi-nor: Remove spi_nor::read_id operation
There is currently no useful way to override the default
implementation of this operation.  The returned struct spi_device_id
must have a pointer to struct flash_info in its private data, but this
structure is defined inside spi-nor.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-21 22:29:10 -07:00
Ben Hutchings a5b7616c55 mtd: m25p80,spi-nor: Fix module aliases for m25p80
m25p80's device ID table is now spi_nor_ids, defined in spi-nor.  The
MODULE_DEVICE_TABLE() macro doesn't work with extern definitions, but
its use was also removed at the same time.  Now if m25p80 is built as
a module it doesn't get the necessary aliases to be loaded
automatically.

A clean solution to this will involve defining the list of device
IDs in spi-nor.h and removing struct spi_device_id from the spi-nor
API, but this is quite a large change.

As a quick fix suitable for stable, copy the device IDs back into
m25p80.

Fixes: 03e296f613 ("mtd: m25p80: use the SPI nor framework")
Cc: <stable@vger.kernel.org> # 3.16.x: 32f1b7c8352f: mtd: move support for struct flash_platform_data into m25p80
Cc: <stable@vger.kernel.org> # 3.16.x: 90e55b3812a1: mtd: m25p80: get rid of spi_get_device_id
Cc: <stable@vger.kernel.org> # 3.16.x: 70f3ce0510af: mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id
Cc: <stable@vger.kernel.org> # 3.16.x
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-21 13:46:03 -07:00
Wolfram Sang c084b7bbd3 mtd: spi-nor: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:59 +02:00
Ben Hutchings 70f3ce0510 mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id
Drivers currently call spi_nor_match_id() and then spi_nor_scan().
This adds a dependency on struct spi_device_id which we want to
avoid.  Make spi_nor_scan() do it for them.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-17 09:29:21 -07:00
Rafał Miłecki 32f1b7c835 mtd: move support for struct flash_platform_data into m25p80
This "type" seems to be an extra hint for m25p80 about the flash. Some
archs register flash_platform_data with "name" set to "m25p80" and then
with a real flash name set in "type". It seems to be a trick specific
to the m25p80 so let's move it out of spi-nor.
Btw switch to the spi_nor_match_id instead of iterating spi_nor_ids.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-28 15:27:03 -07:00
Rafał Miłecki 57cf26c1b2 mtd: spi-nor: add Kconfig option to disable 4K sectors
Current situation with 4K sectors is quite messy. First of all, some
MTD "users" don't work with such small size. An example may be UBIFS
which requires 15 KiB erase blocks as a minimum. In theory spi-nor
should provide multiple erase regions and MTD "users" should use the
one they need. Unforunately that is not implemented.

In the result our flashes database in spi-nor is hackish. For some
flashes we pretend they don't support 4K sectors just because some
distribution uses UBIFS on it. This ofc leads to conflicts, like
Samsung using w25q128 with 4K sectors vs. OpenWrt requiring it to
pretend it's 64 KiB blocks only.

My idea (plan?) for fixing this situation:
1) Use real hw info (this requires a way for disabling 4K for now)
2) Provide detailed info about erase regions
3) Make UBIFS work with devices that support 4K sectors

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-28 14:14:52 -07:00
Rafał Miłecki 54ea17a597 mtd: spi-nor: drop jedec_probe /helper/ function
It's a one-liner doing no magic and its name may be confusing because
it does not have to use JEDEC (e.g. when using alternative read_id).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19 11:53:10 -07:00
Rafał Miłecki ab75e89c01 mtd: spi-nor: remove duplicated w25q128 entry
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19 11:53:10 -07:00
Thomas Petazzoni f2fabe16b8 mtd: spi-nor: add support for Micron M25PX80
This commit adds the support in the spi-nor driver of the Micron
M25PX80 flash, a 8 Mbit SPI flash from Micron.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19 11:53:06 -07:00
Sergey Ryazanov a41595b34b mtd: spi-nor: add support for EON EN25QH128
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-14 10:18:49 -07:00
grmoore@altera.com c14deddec1 mtd: spi-nor: add support for flag status register on Micron chips
Some new Micron flash chips require reading the flag status register to
determine when operations have completed.

Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also
require reading the status register before reading the flag status
register.

This patch adds support for the flag status register in the n25q512ax3
and n25q00 Micron QSPI flash chips.

Signed-off-by: Graham Moore <grmoore@altera.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-11 19:10:35 -07:00
Geert Uytterhoeven 9ab86995ed mtd: spi-nor: Enable Dual and Quad SPI read transfers for s25sl032p
Spansion s25sl032p supports Dual and Quad SPI transfers, hence set the
SPI_NOR_DUAL_READ and SPI_NOR_QUAD_READ flags.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-12 13:16:26 -07:00
Brian Norris a965d04c97 mtd: fsl-quadspi: fix __iomem annotations
This corrects some sparse warnings:

   drivers/mtd/spi-nor/fsl-quadspi.c:281:31: warning: incorrect type in initializer (different address spaces) [sparse]
   drivers/mtd/spi-nor/fsl-quadspi.c:281:31:    expected void *[noderef] <asn:2>base [sparse]
   drivers/mtd/spi-nor/fsl-quadspi.c:281:31:    got void [noderef] <asn:2>*iobase [sparse]
   (etc.)

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-16 02:14:06 -07:00
Brian Norris 8ac326fce9 mtd: spi-nor: allow to be built as module
There's no reason this can't be a module. Also, give SPI-NOR its own
submenu.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-14 11:23:02 -07:00
Brian Norris e43b20619b mtd: spi-nor: shorten Kconfig naming
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14 11:23:01 -07:00