Commit Graph

125 Commits

Author SHA1 Message Date
Paolo Valente 43c1b3d6e5 block, bfq: stress that low_latency must be off to get max throughput
The introduction of the BFQ and Kyber I/O schedulers has triggered a
new wave of I/O benchmarks. Unfortunately, comments and discussions on
these benchmarks confirm that there is still little awareness that it
is very hard to achieve, at the same time, a low latency and a high
throughput. In particular, virtually all benchmarks measure
throughput, or throughput-related figures of merit, but, for BFQ, they
use the scheduler in its default configuration. This configuration is
geared, instead, toward a low latency. This is evidently a sign that
BFQ documentation is still too unclear on this important aspect. This
commit addresses this issue by stressing how BFQ configuration must be
(easily) changed if the only goal is maximum throughput.

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10 07:39:43 -06:00
Paolo Valente 44e44a1b32 block, bfq: improve responsiveness
This patch introduces a simple heuristic to load applications quickly,
and to perform the I/O requested by interactive applications just as
quickly. To this purpose, both a newly-created queue and a queue
associated with an interactive application (we explain in a moment how
BFQ decides whether the associated application is interactive),
receive the following two special treatments:

1) The weight of the queue is raised.

2) The queue unconditionally enjoys device idling when it empties; in
fact, if the requests of a queue are sync, then performing device
idling for the queue is a necessary condition to guarantee that the
queue receives a fraction of the throughput proportional to its weight
(see [1] for details).

For brevity, we call just weight-raising the combination of these
two preferential treatments. For a newly-created queue,
weight-raising starts immediately and lasts for a time interval that:
1) depends on the device speed and type (rotational or
non-rotational), and 2) is equal to the time needed to load (start up)
a large-size application on that device, with cold caches and with no
additional workload.

Finally, as for guaranteeing a fast execution to interactive,
I/O-related tasks (such as opening a file), consider that any
interactive application blocks and waits for user input both after
starting up and after executing some task. After a while, the user may
trigger new operations, after which the application stops again, and
so on. Accordingly, the low-latency heuristic weight-raises again a
queue in case it becomes backlogged after being idle for a
sufficiently long (configurable) time. The weight-raising then lasts
for the same time as for a just-created queue.

According to our experiments, the combination of this low-latency
heuristic and of the improvements described in the previous patch
allows BFQ to guarantee a high application responsiveness.

[1] P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O
    Scheduler", Proceedings of the First Workshop on Mobile System
    Technologies (MST-2015), May 2015.
    http://algogroup.unimore.it/people/paolo/disk_sched/mst-2015.pdf

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19 08:30:26 -06:00
Arianna Avanzini e21b7a0b98 block, bfq: add full hierarchical scheduling and cgroups support
Add complete support for full hierarchical scheduling, with a cgroups
interface. Full hierarchical scheduling is implemented through the
'entity' abstraction: both bfq_queues, i.e., the internal BFQ queues
associated with processes, and groups are represented in general by
entities. Given the bfq_queues associated with the processes belonging
to a given group, the entities representing these queues are sons of
the entity representing the group. At higher levels, if a group, say
G, contains other groups, then the entity representing G is the parent
entity of the entities representing the groups in G.

Hierarchical scheduling is performed as follows: if the timestamps of
a leaf entity (i.e., of a bfq_queue) change, and such a change lets
the entity become the next-to-serve entity for its parent entity, then
the timestamps of the parent entity are recomputed as a function of
the budget of its new next-to-serve leaf entity. If the parent entity
belongs, in its turn, to a group, and its new timestamps let it become
the next-to-serve for its parent entity, then the timestamps of the
latter parent entity are recomputed as well, and so on. When a new
bfq_queue must be set in service, the reverse path is followed: the
next-to-serve highest-level entity is chosen, then its next-to-serve
child entity, and so on, until the next-to-serve leaf entity is
reached, and the bfq_queue that this entity represents is set in
service.

Writeback is accounted for on a per-group basis, i.e., for each group,
the async I/O requests of the processes of the group are enqueued in a
distinct bfq_queue, and the entity associated with this queue is a
child of the entity associated with the group.

Weights can be assigned explicitly to groups and processes through the
cgroups interface, differently from what happens, for single
processes, if the cgroups interface is not used (as explained in the
description of the previous patch). In particular, since each node has
a full scheduler, each group can be assigned its own weight.

Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19 08:30:26 -06:00
Paolo Valente aee69d78de block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler
We tag as v0 the version of BFQ containing only BFQ's engine plus
hierarchical support. BFQ's engine is introduced by this commit, while
hierarchical support is added by next commit. We use the v0 tag to
distinguish this minimal version of BFQ from the versions containing
also the features and the improvements added by next commits. BFQ-v0
coincides with the version of BFQ submitted a few years ago [1], apart
from the introduction of preemption, described below.

BFQ is a proportional-share I/O scheduler, whose general structure,
plus a lot of code, are borrowed from CFQ.

- Each process doing I/O on a device is associated with a weight and a
  (bfq_)queue.

- BFQ grants exclusive access to the device, for a while, to one queue
  (process) at a time, and implements this service model by
  associating every queue with a budget, measured in number of
  sectors.

  - After a queue is granted access to the device, the budget of the
    queue is decremented, on each request dispatch, by the size of the
    request.

  - The in-service queue is expired, i.e., its service is suspended,
    only if one of the following events occurs: 1) the queue finishes
    its budget, 2) the queue empties, 3) a "budget timeout" fires.

    - The budget timeout prevents processes doing random I/O from
      holding the device for too long and dramatically reducing
      throughput.

    - Actually, as in CFQ, a queue associated with a process issuing
      sync requests may not be expired immediately when it empties. In
      contrast, BFQ may idle the device for a short time interval,
      giving the process the chance to go on being served if it issues
      a new request in time. Device idling typically boosts the
      throughput on rotational devices, if processes do synchronous
      and sequential I/O. In addition, under BFQ, device idling is
      also instrumental in guaranteeing the desired throughput
      fraction to processes issuing sync requests (see [2] for
      details).

      - With respect to idling for service guarantees, if several
        processes are competing for the device at the same time, but
        all processes (and groups, after the following commit) have
        the same weight, then BFQ guarantees the expected throughput
        distribution without ever idling the device. Throughput is
        thus as high as possible in this common scenario.

  - Queues are scheduled according to a variant of WF2Q+, named
    B-WF2Q+, and implemented using an augmented rb-tree to preserve an
    O(log N) overall complexity.  See [2] for more details. B-WF2Q+ is
    also ready for hierarchical scheduling. However, for a cleaner
    logical breakdown, the code that enables and completes
    hierarchical support is provided in the next commit, which focuses
    exactly on this feature.

  - B-WF2Q+ guarantees a tight deviation with respect to an ideal,
    perfectly fair, and smooth service. In particular, B-WF2Q+
    guarantees that each queue receives a fraction of the device
    throughput proportional to its weight, even if the throughput
    fluctuates, and regardless of: the device parameters, the current
    workload and the budgets assigned to the queue.

  - The last, budget-independence, property (although probably
    counterintuitive in the first place) is definitely beneficial, for
    the following reasons:

    - First, with any proportional-share scheduler, the maximum
      deviation with respect to an ideal service is proportional to
      the maximum budget (slice) assigned to queues. As a consequence,
      BFQ can keep this deviation tight not only because of the
      accurate service of B-WF2Q+, but also because BFQ *does not*
      need to assign a larger budget to a queue to let the queue
      receive a higher fraction of the device throughput.

    - Second, BFQ is free to choose, for every process (queue), the
      budget that best fits the needs of the process, or best
      leverages the I/O pattern of the process. In particular, BFQ
      updates queue budgets with a simple feedback-loop algorithm that
      allows a high throughput to be achieved, while still providing
      tight latency guarantees to time-sensitive applications. When
      the in-service queue expires, this algorithm computes the next
      budget of the queue so as to:

      - Let large budgets be eventually assigned to the queues
        associated with I/O-bound applications performing sequential
        I/O: in fact, the longer these applications are served once
        got access to the device, the higher the throughput is.

      - Let small budgets be eventually assigned to the queues
        associated with time-sensitive applications (which typically
        perform sporadic and short I/O), because, the smaller the
        budget assigned to a queue waiting for service is, the sooner
        B-WF2Q+ will serve that queue (Subsec 3.3 in [2]).

- Weights can be assigned to processes only indirectly, through I/O
  priorities, and according to the relation:
  weight = 10 * (IOPRIO_BE_NR - ioprio).
  The next patch provides, instead, a cgroups interface through which
  weights can be assigned explicitly.

- If several processes are competing for the device at the same time,
  but all processes and groups have the same weight, then BFQ
  guarantees the expected throughput distribution without ever idling
  the device. It uses preemption instead. Throughput is then much
  higher in this common scenario.

- ioprio classes are served in strict priority order, i.e.,
  lower-priority queues are not served as long as there are
  higher-priority queues.  Among queues in the same class, the
  bandwidth is distributed in proportion to the weight of each
  queue. A very thin extra bandwidth is however guaranteed to the Idle
  class, to prevent it from starving.

- If the strict_guarantees parameter is set (default: unset), then BFQ
     - always performs idling when the in-service queue becomes empty;
     - forces the device to serve one I/O request at a time, by
       dispatching a new request only if there is no outstanding
       request.
  In the presence of differentiated weights or I/O-request sizes,
  both the above conditions are needed to guarantee that every
  queue receives its allotted share of the bandwidth (see
  Documentation/block/bfq-iosched.txt for more details). Setting
  strict_guarantees may evidently affect throughput.

[1] https://lkml.org/lkml/2008/4/1/234
    https://lkml.org/lkml/2008/11/11/148

[2] P. Valente and M. Andreolini, "Improving Application
    Responsiveness with the BFQ Disk I/O Scheduler", Proceedings of
    the 5th Annual International Systems and Storage Conference
    (SYSTOR '12), June 2012.
    Slightly extended version:
    http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-
							results.pdf

Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-19 08:29:02 -06:00
Omar Sandoval 00e043936e blk-mq: introduce Kyber multiqueue I/O scheduler
The Kyber I/O scheduler is an I/O scheduler for fast devices designed to
scale to multiple queues. Users configure only two knobs, the target
read and synchronous write latencies, and the scheduler tunes itself to
achieve that latency goal.

The implementation is based on "tokens", built on top of the scalable
bitmap library. Tokens serve as a mechanism for limiting requests. There
are two tiers of tokens: queueing tokens and dispatch tokens.

A queueing token is required to allocate a request. In fact, these
tokens are actually the blk-mq internal scheduler tags, but the
scheduler manages the allocation directly in order to implement its
policy.

Dispatch tokens are device-wide and split up into two scheduling
domains: reads vs. writes. Each hardware queue dispatches batches
round-robin between the scheduling domains as long as tokens are
available for that domain.

These tokens can be used as the mechanism to enable various policies.
The policy Kyber uses is inspired by active queue management techniques
for network routing, similar to blk-wbt. The scheduler monitors
latencies and scales the number of dispatch tokens accordingly. Queueing
tokens are used to prevent starvation of synchronous requests by
asynchronous requests.

Various extensions are possible, including better heuristics and ionice
support. The new scheduler isn't set as the default yet.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-14 14:06:58 -06:00
Christoph Hellwig 48920ff2a5 block: remove the discard_zeroes_data flag
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-08 11:25:38 -06:00
Shaohua Li 297e3d8547 blk-throttle: make throtl_slice tunable
throtl_slice is important for blk-throttling. It's called slice
internally but it really is a time window blk-throttling samples data.
blk-throttling will make decision based on the samplings. An example is
bandwidth measurement. A cgroup's bandwidth is measured in the time
interval of throtl_slice.

A small throtl_slice meanse cgroups have smoother throughput but burn
more CPUs. It has 100ms default value, which is not appropriate for all
disks. A fast SSD can dispatch a lot of IOs in 100ms. This patch makes
it tunable.

Since throtl_slice isn't a time slice, the sysfs name
'throttle_sample_time' reflects its character better.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-28 08:02:20 -06:00
Linus Torvalds c1aac62f36 A slightly quieter cycle for documentation this time around.
Three more DocBook template files have been converted to RST; only 21 to
 go.  There are various build improvements and the usual array of
 documentation improvements and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYriFXAAoJEI3ONVYwIuV6iTMP/iV7ownq9IK1f8askcXKM76i
 NoRdj4/JywAPQ73vLhOSDVELGdVJNRBjdyOdBRzxPgsqAhFmm79lVYV2eLIffQ2k
 7LcVbEQR77I+4z9SwqIVbIWNCBry7Hu8aWh7moDL3I6yeuay408yr5YW2lIlsqHZ
 V/LZgkTWDe+iQPeXNA4Djzylx0lcRlAy4yMSLjN1+gb9/uBnXb9J0eGJzgfZfrL8
 fiIhymg3bv8vB99l6LMR5vT343QLWXf1yS31A7rPQvwkDo6zFehUJA0XNfIsl2dw
 VQYsvl9vp9wy3e6Y0qKXPn1XhAhCrm64P3crBxK31MMvcKZVCfeRSZ78wrvpvewy
 MVLlXdqop1bHPHowtRfA5jwxr1NqcYp+Jg0+YGX3iXpPi1Jfk36DNUy9iWvtvIzr
 lWgQcIKsdCwwYUcvPR8Kt8T/3q/AHbYlI6mimWlkmbZwncQcgCrH5xSG+c2BIPfV
 fn3W6eLHBn8RyVsxlaXlA0Y9TNtI/Cm85b3Ri10pFvhl868ppWfJxXHi7UtcbU58
 sQzahISCTXOH/NQwkkh7kFMtczbB43rAcChvF7EUYpazVBpJ4P4HxKFg3eIzIdc6
 VlBSaMu1hxUGoYxNNYuKr/nYstuczLOKzK7q4j/JOExY3RgTWP+T3bF02wgubvoa
 D/9WfScewkgCJRoA7i17
 =C5nd
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.11' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A slightly quieter cycle for documentation this time around.

  Three more DocBook template files have been converted to RST; only 21
  to go. There are various build improvements and the usual array of
  documentation improvements and fixes"

* tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits)
  docs / driver-api: Fix structure references in device_link.rst
  PM / docs: Fix structure references in device.rst
  Add a target to check broken external links in the Documentation
  Documentation: Fix linux-api list typo
  Documentation: DocBook/Makefile comment typo
  Improve sparse documentation
  Documentation: make Makefile.sphinx no-ops quieter
  Documentation: DMA-ISA-LPC.txt
  Documentation: input: fix path to input code definitions
  docs: Remove the copyright year from conf.py
  docs: Fix a warning in the Korean HOWTO.rst translation
  PM / sleep / docs: Convert PM notifiers document to reST
  PM / core / docs: Convert sleep states API document to reST
  PM / core: Update kerneldoc comments in pm.h
  doc-rst: Fix recursive make invocation from macros
  doc-rst: Delete output of failed dot-SVG conversion
  doc-rst: Break shell command sequences on failure
  Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0
  doc-rst: fixed cleandoc target when used with O=dir
  Documentation/sphinx: prevent generation of .pyc files in the source tree
  ...
2017-02-22 18:51:29 -08:00
Masanari Iida 8da9704c8b Doc: Fix double words in Documentation
This patch fix some double words found in Documentation.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-01-26 15:25:41 -07:00
Jeff Moyer 7158339d4c block: fix up io_poll documentation
/sys/block/<dev>/queue/io_poll is a boolean.  Fix the docs.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-03 16:47:13 -07:00
Jens Axboe 80e091d10e blk-wbt: allow reset of default latency through sysfs
Allow a write of '-1' to reset the default latency target for
a given device. This removes knowledge of the different default
settings for rotational vs non-rotational from user space.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-28 10:27:03 -07:00
Jens Axboe 10e6246e22 block: document the 'io_poll_delay' queue sysfs file
This was documented in the original commit, 64f1c21e86, but it
never made it into the proper location for queue sysfs files.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-17 22:23:02 -07:00
Yasuaki Ishimatsu 92153d30c7 null_blk: add usage hints for NVM
If CONFIG_NVM is disabled, loading null_block module with use_lightnvm=1
fails. But there are no messages and documents related to the failure.

Add the appropriate error message.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

Massaged the text a bit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-16 08:26:11 -07:00
Jens Axboe 87760e5eef block: hook up writeback throttling
Enable throttling of buffered writeback to make it a lot
more smooth, and has way less impact on other system activity.
Background writeback should be, by definition, background
activity. The fact that we flush huge bundles of it at the time
means that it potentially has heavy impacts on foreground workloads,
which isn't ideal. We can't easily limit the sizes of writes that
we do, since that would impact file system layout in the presence
of delayed allocation. So just throttle back buffered writeback,
unless someone is waiting for it.

The algorithm for when to throttle takes its inspiration in the
CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors
the minimum latencies of requests over a window of time. In that
window of time, if the minimum latency of any request exceeds a
given target, then a scale count is incremented and the queue depth
is shrunk. The next monitoring window is shrunk accordingly. Unlike
CoDel, if we hit a window that exhibits good behavior, then we
simply increment the scale count and re-calculate the limits for that
scale value. This prevents us from oscillating between a
close-to-ideal value and max all the time, instead remaining in the
windows where we get good behavior.

Unlike CoDel, blk-wb allows the scale count to to negative. This
happens if we primarily have writes going on. Unlike positive
scale counts, this doesn't change the size of the monitoring window.
When the heavy writers finish, blk-bw quickly snaps back to it's
stable state of a zero scale count.

The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency
target to me met. It defaults to 2 msec for non-rotational storage, and
75 msec for rotational storage. Setting this value to '0' disables
blk-wb. Generally, a user would not have to touch this setting.

We don't enable WBT on devices that are managed with CFQ, and have
a non-root block cgroup attached. If we have a proportional share setup
on this particular disk, then the wbt throttling will interfere with
that. We don't have a strong need for wbt for that case, since we will
rely on CFQ doing that for us.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 13:53:40 -07:00
Christoph Hellwig a2b809672e block: replace REQ_NOIDLE with REQ_IDLE
Noidle should be the default for writes as seen by all the compounds
definitions in fs.h using it.  In fact only direct I/O really should
be using NODILE, so turn the whole flag around to get the defaults
right, which will make our life much easier especially onces the
WRITE_* defines go away.

This assumes all the existing "raw" users of REQ_SYNC for writes
want noidle behavior, which seems to be spot on from a quick audit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01 09:43:26 -06:00
Christoph Hellwig ef295ecf09 block: better op and flags encoding
Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields.  This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.

In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.

Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits.  Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28 08:48:16 -06:00
Christoph Hellwig e806402130 block: split out request-only flags into a new namespace
A lot of the REQ_* flags are only used on struct requests, and only of
use to the block layer and a few drivers that dig into struct request
internals.

This patch adds a new req_flags_t rq_flags field to struct request for
them, and thus dramatically shrinks the number of common requests.  It
also removes the unfortunate situation where we have to fit the fields
from the same enum into 32 bits for struct bio and 64 bits for
struct request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28 08:45:17 -06:00
Linus Walleij a441b0d093 block: remove remnant refs to hardsect
commit e1defc4ff0
"block: Do away with the notion of hardsect_size"
removed the notion of "hardware sector size" from
the kernel in favor of logical block size, but
references remain in comments and documentation.

Update the remaining sites mentioning hardsect.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-14 08:44:57 -06:00
Joe Lawrence 005411ea7e doc: update block/queue-sysfs.txt entries
Add descriptions for dax, io_poll, and write_same_max_bytes files.

Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-11 09:37:23 -06:00
Jens Axboe 1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Linus Torvalds 6784725ab0 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Assorted cleanups and fixes.

  Probably the most interesting part long-term is ->d_init() - that will
  have a bunch of followups in (at least) ceph and lustre, but we'll
  need to sort the barrier-related rules before it can get used for
  really non-trivial stuff.

  Another fun thing is the merge of ->d_iput() callers (dentry_iput()
  and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
  except the one in __d_lookup_lru())"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  fs/dcache.c: avoid soft-lockup in dput()
  vfs: new d_init method
  vfs: Update lookup_dcache() comment
  bdev: get rid of ->bd_inodes
  Remove last traces of ->sync_page
  new helper: d_same_name()
  dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
  vfs: clean up documentation
  vfs: document ->d_real()
  vfs: merge .d_select_inode() into .d_real()
  unify dentry_iput() and dentry_unlink_inode()
  binfmt_misc: ->s_root is not going anywhere
  drop redundant ->owner initializations
  ufs: get rid of redundant checks
  orangefs: constify inode_operations
  missed comment updates from ->direct_IO() prototype change
  file_inode(f)->i_mapping is f->f_mapping
  trim fsnotify hooks a bit
  9p: new helper - v9fs_parent_fid()
  debugfs: ->d_parent is never NULL or negative
  ...
2016-07-28 12:59:05 -07:00
Matthew Wilcox f4e6d844bd Remove last traces of ->sync_page
Commit 7eaceaccab removed ->sync_page, but a few mentions of it still
existed in documentation and comments,

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-30 23:30:52 -04:00
Masanari Iida 141fd28cee Doc: block: Fix a typo in queue-sysfs.txt
This patch fix a spelling typo found in queue-sysfs.txt.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-28 14:14:16 -06:00
Mike Christie 28a8f0d317 block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie 3a5e02ced1 block, drivers: add REQ_OP_FLUSH operation
This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Linus Torvalds e9ad9b9bd3 The most interesting thing (IMO) this time around is some beginning
infrastructural work to allow documents to be written using restructured
 text.  Maybe someday, in a galaxy far far away, we'll be able to eliminate
 the DocBook dependency and have a much better integrated set of kernel
 docs.  Someday.
 
 Beyond that, there's a new document on security hardening from Kees, the
 movement of some sample code over to samples/, a number of improvements to
 the serial docs from Geert, and the usual collection of corrections, typo
 fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPf/VAAoJEI3ONVYwIuV60pkP/3brq+CavbwptWppESoyZaf7
 mpVSH7sOKicMcfHYYIXHmmg0K5gM4e22ATl39+izUCRZRwRnObXvroH++G5mARLs
 MUDxLvkc/QxDDuCZnUBq5E2gPtuyYpgj1q9fMGB+70ucc/EXYp5cxUhDmbNVrpSG
 KBMoZqKaW/Cf8/4fvRQG/glSR0iwyaQuvvoFAWLHgf8uWN/JPM2Cnv9V2zGQCtzP
 4B4Jzayu2BGKowBd65WUYdpGnccc7OAJFSJDY/Z9x7kVxKyD+VTn7VgxGnXxs88v
 uNmUEMENUpswzuoYEnDHoR0Y2o7jUi2doFKv+eacSmPaMLWL5EMDzcooZ+Vi7HWH
 mvp6GtAZ5qs96OGjsi+gFIw4kY8HGdnpzs7qk/uEdAndfAif5v24YLSQRG2rUCJM
 LxomnAWOJEIWGKJtuJnl16aZkgOcn6soecXw3PJmpxzhwd8BnQzwyZIdaZ98kwjA
 7Enq2Mmw5NBQwGIV2ODUxzoQ3Axj7aJJsDra2n6lPGTGXONGdgNFzk/hGmtQSuIp
 Aeatiy66FF0qKomzs2+EACOFP+eH/IId0yvW83Pj0o9nV25YZiPsw0Z1Tae5n3+g
 zgTFycalaowIwE3YzyH6BwvnMrluiPpUTjSLsmEaviJxE7/o+zrjOvMvallUIVUn
 YkJcia/DtSuc7u7LYkWe
 =2O+a
 -----END PGP SIGNATURE-----

Merge tag 'docs-for-linus' of git://git.lwn.net/linux

Pull Documentation updates from Jon Corbet:
 "A bit busier this time around.

  The most interesting thing (IMO) this time around is some beginning
  infrastructural work to allow documents to be written using
  restructured text.  Maybe someday, in a galaxy far far away, we'll be
  able to eliminate the DocBook dependency and have a much better
  integrated set of kernel docs.  Someday.

  Beyond that, there's a new document on security hardening from Kees,
  the movement of some sample code over to samples/, a number of
  improvements to the serial docs from Geert, and the usual collection
  of corrections, typo fixes, etc"

* tag 'docs-for-linus' of git://git.lwn.net/linux: (55 commits)
  doc: self-protection: provide initial details
  serial: doc: Use port->state instead of info
  serial: doc: Always refer to tty_port->mutex
  Documentation: vm: Spelling s/paltform/platform/g
  Documentation/memcg: update kmem limit doc as codes behavior
  docproc: print a comment about autogeneration for rst output
  docproc: add support for reStructuredText format via --rst option
  docproc: abstract terminating lines at first space
  docproc: abstract docproc directive detection
  docproc: reduce unnecessary indentation
  docproc: add variables for subcommand and filename
  kernel-doc: use rst C domain directives and references for types
  kernel-doc: produce RestructuredText output
  kernel-doc: rewrite usage description, remove duplicated comments
  Doc: correct the location of sysrq.c
  Documentation: fix common spelling mistakes
  samples: v4l: from Documentation to samples directory
  samples: connector: from Documentation to samples directory
  Documentation: xillybus: fix spelling mistake
  Documentation: x86: fix spelling mistakes
  ...
2016-05-19 18:07:25 -07:00
Jens Axboe 2245f6de6c block: kill blk_queue_flush()
We don't have any drivers left using it, so kill it off. Update
documentation to use the newer blk_queue_write_cache().

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12 16:00:39 -06:00
Jens Axboe 93e9d8e836 block: add ability to flag write back caching on a device
Add an internal helper and flag for setting whether a queue has
write back caching, or write through (or none). Add a sysfs file
to show this as well, and make it changeable from user space.

This will replace the (awkward) blk_queue_flush() interface that
drivers currently use to inform the block layer of write cache state
and capabilities.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12 15:46:27 -06:00
Wei Fang 5408e5a455 Documentation: update missing index files in block/00-INDEX
Update missing index files in block/00-INDEX.

Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-03-31 00:44:26 -06:00
Linus Torvalds e535d74bc5 A relatively boring cycle in the docs tree. There's a few kernel-doc
fixes and various document tweaks.
 
 One patch reaches out of the documentation subtree to fix a comment in
 init/do_mounts_rd.c.  There didn't seem to be anybody more appropriate to
 take that one, so I accepted it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWmmJ8AAoJEI3ONVYwIuV6uqwP/0mnqdxVWo47ohaYJP7q0Soh
 ovJAbfttxKnkmOdGbWcNIJtTiw+MpdF805CYR+2treE0zvEEDodg7BhkDnmKZJ9n
 F1r53JrIj769E1c5ETmWTHcBt3jjtKyQIbBmDr4YTgX91dlKF28o1bMmyDECWIcT
 PktTlPUidDtffKMn3klh6baPCMrTpLJ8aLshBzUrQhrQY8lxcZKAU+98vtFzYofG
 LXCSulMYXumb7XBxErTLQZhmJslD4gaDMh2xkov6ALS8XNHnfoUIFRbArAllNfTf
 LQGJ6Q5qnn58UWi9F/vgDqx7+d1KIPUjBxJR9wfa0w9ggQhA9ly2BSN/fllbiSbp
 yIi1JS4hwBe8H/h577BNC3xjmgVN7mazZsXlS+fg3G16gpv4JdWeRY4efjosFIzQ
 EIJxB8qAovUNqw4s1mzRIJ5B9L7PEK27O6z8N27Fiw4EigtMTFAOC2/GD3ELx4iJ
 p1doiSr+wjfDcFd8kdIUiDKGrTSTXwNy3hUfrhzQyaEjDTJnx3+1+ono1orSazPO
 Fr2RSsC5VzX4IYSuxTMvFSKjN1Iiu8xqwq3IdclHXrBhRvwOF2wpjjQ5Guf0lHBJ
 FLBahSjZqt01kmwFykxoHps+VeSwpoEen6rClBQolfmtYVDTvgRNN46AxK9jZ8T4
 jZmCNNs/mYzrqo/RTnmw
 =u38W
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.5' of git://git.lwn.net/linux

Pull documentation updates from Jon Corbet:
 "A relatively boring cycle in the docs tree.  There's a few kernel-doc
  fixes and various document tweaks.

  One patch reaches out of the documentation subtree to fix a comment in
  init/do_mounts_rd.c.  There didn't seem to be anybody more appropriate
  to take that one, so I accepted it"

* tag 'docs-4.5' of git://git.lwn.net/linux: (29 commits)
  thermal: add description for integral_cutoff unit
  Documentation: update libhugetlbfs site url
  Documentation: Explain pci=conf1,conf2 more verbosely
  DMA-API: fix confusing sentence in Documentation/DMA-API.txt
  Documentation: translations: update linux cross reference link
  Documentation: fix typo in CodingStyle
  init, Documentation: Remove ramdisk_blocksize mentions
  Documentation-getdelays: Apply a recommendation from "checkpatch.pl" in main()
  Documentation: HOWTO: update versions from 3.x to 4.x
  Documentation: remove outdated references from translations
  Doc: treewide: Fix grammar "a" to "an"
  Documentation: cpu-hotplug: Fix sysfs mount instructions
  can-doc: Add hint about getting timestamps
  Fix CFQ I/O scheduler parameter name in documentation
  Documentation: arm: remove dead links from Marvell Berlin docs
  Documentation: HOWTO: update code cross reference link
  Doc: Docbook/iio: Fix typo in iio.tmpl
  DocBook: make index.html generation less verbose by default
  DocBook: Cleanup: remove an unused $(call) line
  DocBook: Add a help message for DOCBOOKS env var
  ...
2016-01-17 11:55:07 -08:00
Libor Pechacek bcebb4cc20 Fix CFQ I/O scheduler parameter name in documentation
As seen in block/cfq-iosched.c, the parameter name is low_latency.

Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-12-10 11:26:24 -07:00
Matias Bjørling b2b7e00148 null_blk: register as a LightNVM device
Add support for registering as a LightNVM device. This allows us to
evaluate the performance of the LightNVM subsystem.

In /drivers/Makefile, LightNVM is moved above block device drivers
to make sure that the LightNVM media managers have been initialized
before drivers under /drivers/block are initialized.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Fix by Jens Axboe to remove unneeded slab cache and the following
memory leak.
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16 15:22:28 -07:00
Christoph Hellwig bbd3e06436 block: add an API for Persistent Reservations
This commits adds a driver API and ioctls for controlling Persistent
Reservations s/genericly/generically/ at the block layer.  Persistent
Reservations are supported by SCSI and NVMe and allow controlling who gets
access to a device in a shared storage setup.

Note that we add a pr_ops structure to struct block_device_operations
instead of adding the members directly to avoid bloating all instances
of devices that will never support Persistent Reservations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:46:56 -06:00
Dongsu Park 2ec3182f9c Documentation: update notes in biovecs about arbitrarily sized bios
Update block/biovecs.txt so that it includes a note on what kind of
effects arbitrarily sized bios would bring to the block layer.
Also fix a trivial typo, bio_iter_iovec.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13 12:32:07 -06:00
Christoph Hellwig 4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00
Jens Axboe 0034af0365 block: make /sys/block/<dev>/queue/discard_max_bytes writeable
Lots of devices support huge discard sizes these days. Depending
on how the device handles them internally, huge discards can
introduce massive latencies (hundreds of msec) on the device side.

We have a sysfs file, discard_max_bytes, that advertises the max
hardware supported discard size. Make this writeable, and split
the settings into a soft and hard limit. This can be set from
'discard_granularity' and up to the hardware limit.

Add a new sysfs file, 'discard_max_hw_bytes', that shows the hw
set limit.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17 08:41:53 -06:00
Leonid V. Fedorenchik 8962786ce3 Documentation: Remove mentioning of block barriers
Remove mentioning of block barriers since they were removed.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:56 -06:00
Linus Torvalds caf292ae5b Merge branch 'for-3.19/core' of git://git.kernel.dk/linux-block
Pull block driver core update from Jens Axboe:
 "This is the pull request for the core block IO changes for 3.19.  Not
  a huge round this time, mostly lots of little good fixes:

   - Fix a bug in sysfs blktrace interface causing a NULL pointer
     dereference, when enabled/disabled through that API.  From Arianna
     Avanzini.

   - Various updates/fixes/improvements for blk-mq:

        - A set of updates from Bart, mostly fixing buts in the tag
          handling.

        - Cleanup/code consolidation from Christoph.

        - Extend queue_rq API to be able to handle batching issues of IO
          requests. NVMe will utilize this shortly. From me.

        - A few tag and request handling updates from me.

        - Cleanup of the preempt handling for running queues from Paolo.

        - Prevent running of unmapped hardware queues from Ming Lei.

        - Move the kdump memory limiting check to be in the correct
          location, from Shaohua.

        - Initialize all software queues at init time from Takashi. This
          prevents a kobject warning when CPUs are brought online that
          weren't online when a queue was registered.

   - Single writeback fix for I_DIRTY clearing from Tejun.  Queued with
     the core IO changes, since it's just a single fix.

   - Version X of the __bio_add_page() segment addition retry from
     Maurizio.  Hope the Xth time is the charm.

   - Documentation fixup for IO scheduler merging from Jan.

   - Introduce (and use) generic IO stat accounting helpers for non-rq
     drivers, from Gu Zheng.

   - Kill off artificial limiting of max sectors in a request from
     Christoph"

* 'for-3.19/core' of git://git.kernel.dk/linux-block: (26 commits)
  bio: modify __bio_add_page() to accept pages that don't start a new segment
  blk-mq: Fix uninitialized kobject at CPU hotplugging
  blktrace: don't let the sysfs interface remove trace from running list
  blk-mq: Use all available hardware queues
  blk-mq: Micro-optimize bt_get()
  blk-mq: Fix a race between bt_clear_tag() and bt_get()
  blk-mq: Avoid that __bt_get_word() wraps multiple times
  blk-mq: Fix a use-after-free
  blk-mq: prevent unmapped hw queue from being scheduled
  blk-mq: re-check for available tags after running the hardware queue
  blk-mq: fix hang in bt_get()
  blk-mq: move the kdump check to blk_mq_alloc_tag_set
  blk-mq: cleanup tag free handling
  blk-mq: use 'nr_cpu_ids' as highest CPU ID count for hwq <-> cpu map
  blk: introduce generic io stat accounting help function
  blk-mq: handle the single queue case in blk_mq_hctx_next_cpu
  genhd: check for int overflow in disk_expand_part_tbl()
  blk-mq: add blk_mq_free_hctx_request()
  blk-mq: export blk_mq_free_request()
  blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable
  ...
2014-12-13 14:14:23 -08:00
Christoph Hellwig 125c99bc8b scsi: add new scsi-command flag for tagged commands
Currently scsi piggy backs on the block layer to define the concept
of a tagged command.  But we want to be able to have block-level host-wide
tags assigned even for untagged commands like the initial INQUIRY, so add
a new SCSI-level flag for commands that are tagged at the scsi level, so
that even commands without that set can have tags assigned to them.  Note
that this alredy is the case for the blk-mq code path, and this just lets
the old path catch up with it.

We also set this flag based upon sdev->simple_tags instead of the block
queue flag, so that it is entirely independent of the block layer tagging,
and thus always correct even if a driver doesn't use block level tagging
yet.

Also remove the old blk_rq_tagged; it was only used by SCSI drivers, and
removing it forces them to look for the proper replacement.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:40 +01:00
Jan Kara b8ab956c54 block: Expand a bit documentation about elevator_allow_merge_fn
Explain that two requests can be merged without
elevator_allow_merge_fn() being called.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-04 08:28:15 -07:00
Linus Torvalds d3dc366bba Merge branch 'for-3.18/core' of git://git.kernel.dk/linux-block
Pull core block layer changes from Jens Axboe:
 "This is the core block IO pull request for 3.18.  Apart from the new
  and improved flush machinery for blk-mq, this is all mostly bug fixes
  and cleanups.

   - blk-mq timeout updates and fixes from Christoph.

   - Removal of REQ_END, also from Christoph.  We pass it through the
     ->queue_rq() hook for blk-mq instead, freeing up one of the request
     bits.  The space was overly tight on 32-bit, so Martin also killed
     REQ_KERNEL since it's no longer used.

   - blk integrity updates and fixes from Martin and Gu Zheng.

   - Update to the flush machinery for blk-mq from Ming Lei.  Now we
     have a per hardware context flush request, which both cleans up the
     code should scale better for flush intensive workloads on blk-mq.

   - Improve the error printing, from Rob Elliott.

   - Backing device improvements and cleanups from Tejun.

   - Fixup of a misplaced rq_complete() tracepoint from Hannes.

   - Make blk_get_request() return error pointers, fixing up issues
     where we NULL deref when a device goes bad or missing.  From Joe
     Lawrence.

   - Prep work for drastically reducing the memory consumption of dm
     devices from Junichi Nomura.  This allows creating clone bio sets
     without preallocating a lot of memory.

   - Fix a blk-mq hang on certain combinations of queue depths and
     hardware queues from me.

   - Limit memory consumption for blk-mq devices for crash dump
     scenarios and drivers that use crazy high depths (certain SCSI
     shared tag setups).  We now just use a single queue and limited
     depth for that"

* 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits)
  block: Remove REQ_KERNEL
  blk-mq: allocate cpumask on the home node
  bio-integrity: remove the needless fail handle of bip_slab creating
  block: include func name in __get_request prints
  block: make blk_update_request print prefix match ratelimited prefix
  blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio
  block: fix alignment_offset math that assumes io_min is a power-of-2
  blk-mq: Make bt_clear_tag() easier to read
  blk-mq: fix potential hang if rolling wakeup depth is too high
  block: add bioset_create_nobvec()
  block: use bio_clone_fast() in blk_rq_prep_clone()
  block: misplaced rq_complete tracepoint
  sd: Honor block layer integrity handling flags
  block: Replace strnicmp with strncasecmp
  block: Add T10 Protection Information functions
  block: Don't merge requests if integrity flags differ
  block: Integrity checksum flag
  block: Relocate bio integrity flags
  block: Add a disk flag to block integrity profile
  block: Add prefix to block integrity profile flags
  ...
2014-10-18 11:53:51 -07:00
Martin K. Petersen 8492b68bc4 block: Remove integrity tagging functions
None of the filesystems appear interested in using the integrity tagging
feature. Potentially because very few storage devices actually permit
using the application tag space.

Remove the tagging functions.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27 09:14:50 -06:00
Martin K. Petersen 180b2f95dd block: Replace bi_integrity with bi_special
For commands like REQ_COPY we need a way to pass extra information along
with each bio. Like integrity metadata this information must be
available at the bottom of the stack so bi_private does not suffice.

Rename the existing bi_integrity field to bi_special and make it a union
so we can have different bio extensions for each class of command.

We previously used bi_integrity != NULL as a way to identify whether a
bio had integrity metadata or not. Introduce a REQ_INTEGRITY to be the
indicator now that bi_special can contain different things.

In addition, bio_integrity(bio) will now return a pointer to the
integrity payload (when applicable).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27 09:14:46 -06:00
Martin K. Petersen e7258c1a26 block: Get rid of bdev_integrity_enabled()
bdev_integrity_enabled() is only used by bio_integrity_enabled().
Combine these two functions.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-27 09:14:44 -06:00
Arnd Hannemann db4ced14c1 doc: queue-sysfs: minor fixes
This patches fixes a typo, and for consistency use
"IO" in upper case in the block/queue-sysfs.txt documentation.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-28 14:47:22 +02:00
Fam Zheng a2787312e9 Documentation: Fix null_blk parameter irq_mode to irqmode
To match the real module parameter name we implemented.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-26 09:35:52 +02:00
Henrik Austad 3cf8ca1c25 Documentation/: update 00-INDEX files
Some of the 00-INDEX files are somewhat outdated and some folders does
not contain 00-INDEX at all.  Only outdated (with the notably exception
of spi) indexes are touched here, the 169 folders without 00-INDEX has
not been touched.

New 00-INDEX
 - spi/* was added in a series of commits dating back to 2006

Added files (missing in (*/)00-INDEX)
 - dmatest.txt was added by commit 851b7e16a0 ("dmatest: run test via
   debugfs")
 - this_cpu_ops.txt was added by commit a1b2a555d6 ("percpu: add
   documentation on this_cpu operations")
 - ww-mutex-design.txt was added by commit 040a0a3710 ("mutex: Add
   support for wound/wait style locks")
 - bcache.txt was added by commit cafe563591 ("bcache: A block layer
   cache")
 - kernel-per-CPU-kthreads.txt was added by commit 49717cb404
   ("kthread: Document ways of reducing OS jitter due to per-CPU
   kthreads")
 - phy.txt was added by commit ff76496347 ("drivers: phy: add generic
   PHY framework")
 - block/null_blk was added by commit 12f8f4fc03 ("null_blk:
   documentation")
 - module-signing.txt was added by commit 3cafea3076 ("Add
   Documentation/module-signing.txt file")
 - assoc_array.txt was added by commit 3cb989501c ("Add a generic
   associative array implementation.")
 - arm/IXP4xx was part of the initial repo
 - arm/cluster-pm-race-avoidance.txt was added by commit 7fe31d28e8
   ("ARM: mcpm: introduce helpers for platform coherency exit/setup")
 - arm/firmware.txt was added by commit 7366b92a77 ("ARM: Add
   interface for registering and calling firmware-specific operations")
 - arm/kernel_mode_neon.txt was added by commit 2afd0a0524 ("ARM:
   7825/1: document the use of NEON in kernel mode")
 - arm/tcm.txt was added by commit bc581770cf ("ARM: 5580/2: ARM TCM
   (Tightly-Coupled Memory) support v3")
 - arm/vlocks.txt was added by commit 9762f12d3e ("ARM: mcpm: Add
   baremetal voting mutexes")
 - blackfin/gptimers-example.c, Makefile was added by commit
   4b60779d5e ("Blackfin: add an example showing how to use the
   gptimers API")
 - devicetree/usage-model.txt was added by commit 31134efc68 ("dt:
   Linux DT usage model documentation")
 - fb/api.txt was added by commit fb21c2f428 ("fbdev: Add FOURCC-based
   format configuration API")
 - fb/sm501.txt was added by commit e6a0498071 ("video, sm501: add
   edid and commandline support")
 - fb/udlfb.txt was added by commit 96f8d864af ("fbdev: move udlfb out
   of staging.")
 - filesystems/Makefile was added by commit 1e0051ae48
   ("Documentation/fs/: split txt and source files")
 - filesystems/nfs/nfsd-admin-interfaces.txt was added by commit
   8a4c6e19cf ("nfsd: document kernel interfaces for nfsd
   configuration")
 - ide/warm-plug-howto.txt was added by commit f74c91413e ("ide: add
   warm-plug support for IDE devices (take 2)")
 - laptops/Makefile was added by commit d49129accc
   ("Documentation/laptop/: split txt and source files")
 - leds/leds-blinkm.txt was added by commit b54cf35a7f ("LEDS: add
   BlinkM RGB LED driver, documentation and update MAINTAINERS")
 - leds/ledtrig-oneshot.txt was added by commit 5e417281cd ("leds: add
   oneshot trigger")
 - leds/ledtrig-transient.txt was added by commit 44e1e9f8e7 ("leds:
   add new transient trigger for one shot timer activation")
 - m68k/README.buddha was part of the initial repo
 - networking/LICENSE.(qla3xxx|qlcnic|qlge) was added by commits
   40839129f7, c4e84bde1d, 5a4faa8737
 - networking/Makefile was added by commit 3794f3e812 ("docsrc: build
   Documentation/ sources")
 - networking/i40evf.txt was added by commit 105bf2fe6b ("i40evf: add
   driver to kernel build system")
 - networking/ipsec.txt was added by commit b3c6efbc36 ("xfrm: Add
   file to document IPsec corner case")
 - networking/mac80211-auth-assoc-deauth.txt was added by commit
   3cd7920a2b ("mac80211: add auth/assoc/deauth flow diagram")
 - networking/netlink_mmap.txt was added by commit 5683264c39
   ("netlink: add documentation for memory mapped I/O")
 - networking/nf_conntrack-sysctl.txt was added by commit c9f9e0e159
   ("netfilter: doc: add nf_conntrack sysctl api documentation") lan)
 - networking/team.txt was added by commit 3d249d4ca7 ("net: introduce
   ethernet teaming device")
 - networking/vxlan.txt was added by commit d342894c5d ("vxlan:
   virtual extensible lan")
 - power/runtime_pm.txt was added by commit 5e928f77a0 ("PM: Introduce
   core framework for run-time PM of I/O devices (rev.  17)")
 - power/charger-manager.txt was added by commit 3bb3dbbd56
   ("power_supply: Add initial Charger-Manager driver")
 - RCU/lockdep-splat.txt was added by commit d7bd2d68aa ("rcu:
   Document interpretation of RCU-lockdep splats")
 - s390/kvm.txt was added by 5ecee4b (KVM: s390: API documentation)
 - s390/qeth.txt was added by commit b4d72c08b3 ("qeth: bridgeport
   support - basic control")
 - scheduler/sched-bwc.txt was added by commit 88ebc08ea9 ("sched: Add
   documentation for bandwidth control")
 - scsi/advansys.txt was added by commit 4bd6d7f356 ("[SCSI] advansys:
   Move documentation to Documentation/scsi")
 - scsi/bfa.txt was added by commit 1ec90174bd ("[SCSI] bfa: add
   readme file")
 - scsi/bnx2fc.txt was added by commit 12b8fc10ea ("[SCSI] bnx2fc: Add
   driver documentation")
 - scsi/cxgb3i.txt was added by commit c3673464eb ("[SCSI] cxgb3i: Add
   cxgb3i iSCSI driver.")
 - scsi/hpsa.txt was added by commit 992ebcf14f ("[SCSI] hpsa: Add
   hpsa.txt to Documentation/scsi")
 - scsi/link_power_management_policy.txt was added by commit
   ca77329fb7 ("[libata] Link power management infrastructure")
 - scsi/osd.txt was added by commit 78e0c621de ("[SCSI] osd:
   Documentation for OSD library")
 - scsi/scsi-parameter.txt was created/moved by commit 163475fb11
   ("Documentation: move SCSI parameters to their own text file")
 - serial/driver was part of the initial repo
 - serial/n_gsm.txt was added by commit 323e84122e ("n_gsm: add a
   documentation")
 - timers/Makefile was added by commit 3794f3e812 ("docsrc: build
   Documentation/ sources")
 - virt/kvm/s390.txt was added by commit d9101fca3d ("KVM: s390:
   diagnose call documentation")
 - vm/split_page_table_lock was added by commit 49076ec2cc ("mm:
   dynamically allocate page->ptl if it cannot be embedded to struct
   page")
 - w1/slaves/w1_ds28e04 was added by commit fbf7f7b4e2 ("w1: Add
   1-wire slave device driver for DS28E04-100")
 - w1/masters/omap-hdq was added by commit e0a29382c6 ("hdq:
   documentation for OMAP HDQ")
 - x86/early-microcode.txt was added by commit 0d91ea86a8 ("x86, doc:
   Documentation for early microcode loading")
 - x86/earlyprintk.txt was added by commit a1aade4788 ("x86/doc:
   mini-howto for using earlyprintk=dbgp")
 - x86/entry_64.txt was added by commit 8b4777a4b5 ("x86-64: Document
   some of entry_64.S")
 - x86/pat.txt was added by commit d27554d874 ("x86: PAT
   documentation")

Moved files
 - arm/kernel_user_helpers.txt was moved out of arch/arm/kernel by
   commit 37b8304642 ("ARM: kuser: move interface documentation out of
   the source code")
 - efi-stub.txt was moved out of x86/ and down into Documentation/ in
   commit 4172fe2f8a ("EFI stub documentation updates")
 - laptops/hpfall.c was moved out of hwmon/ and into laptops/ in commit
   efcfed9bad ("Move hp_accel to drivers/platform/x86")
 - commit 5616c23ad9 ("x86: doc: move x86-generic documentation from
   Doc/x86/i386"):
   * x86/usb-legacy-support.txt
   * x86/boot.txt
   * x86/zero_page.txt
 - power/video_extension.txt was moved to acpi in commit 70e66e4df1
   ("ACPI / video: move video_extension.txt to Documentation/acpi")

Removed files (left in 00-INDEX)
 - memory.txt was removed by commit 00ea8990aa ("memory.txt: remove
   stray information")
 - gpio.txt was moved to gpio/ in commit fd8e198cfc ("Documentation:
   gpiolib: document new interface")
 - networking/DLINK.txt was removed by commit 168e06ae26
   ("drivers/net: delete old parallel port de600/de620 drivers")
 - serial/hayes-esp.txt was removed by commit f53a2ade0b ("tty: esp:
   remove broken driver")
 - s390/TAPE was removed by commit 9e280f6693 ("[S390] remove tape
   block docu")
 - vm/locking was removed by commit 57ea8171d2 ("mm: documentation:
   remove hopelessly out-of-date locking doc")
 - laptops/acer-wmi.txt was remvoed by commit 020036678e ("acer-wmi:
   Delete out-of-date documentation")

Typos/misc issues
 - rpc-server-gss.txt was added as knfsd-rpcgss.txt in commit
   030d794bf4 ("SUNRPC: Use gssproxy upcall for server RPCGSS
   authentication.")
 - commit b88cf73d92 ("net: add missing entries to
   Documentation/networking/00-INDEX")
   * generic-hdlc.txt was added as generic_hdlc.txt
   * spider_net.txt was added as spider-net.txt
 - w1/master/mxc-w1 was added as mxc_w1 by commit a5fd9139f7 ("w1: add
   1-wire master driver for i.MX27 / i.MX31")
 - s390/zfcpdump.txt was added as zfcpdump by commit 6920c12a40
   ("[S390] Add Documentation/s390/00-INDEX.")

Signed-off-by: Henrik Austad <henrik@austad.us>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>	[rcu bits]
Acked-by: Rob Landley <rob@landley.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Len Brown <len.brown@intel.com>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:40 -08:00
Jens Axboe b28bc9b38c Linux 3.13-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
 189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
 LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
 k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
 eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
 YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
 =/4/R
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc6' into for-3.14/core

Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.

Fixup merge issues related to the immutable biovec changes.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Conflicts:
	block/blk-flush.c
	fs/btrfs/check-integrity.c
	fs/btrfs/extent_io.c
	fs/btrfs/scrub.c
	fs/logfs/dev_bdev.c
2013-12-31 09:51:02 -07:00
Matias Bjørling 200052440d null_blk: set use_per_node_hctx param to false
The defaults for the module is to instantiate itself with blk-mq and a
submit queue for each CPU node in the system.

To save resources, initialize instead with a single submit queue.

Signed-off-by: Matias Bjorling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-21 09:30:33 -07:00
Matias Bjørling 89ed05eea0 null_blk: corrections to documentation
Randy Dunlap reported a couple of grammar errors and unfortunate usages of
socket/node/core.

Signed-off-by: Matias Bjorling <m@bjorling.me>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-21 09:30:33 -07:00