Commit Graph

1288 Commits

Author SHA1 Message Date
Linus Torvalds bab588fcfb arm-soc: soc-specific updates
This is a larger set of new functionality for the existing SoC families,
 including:
 
 * vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850
 * prima2 gains support for the "marco" SoC family, its SMP based cousin
 * tegra gains support for the new Tegra4 (Tegra114) family
 * socfpga now supports a newer version of the hardware including SMP
 * i.mx31 and bcm2835 are now using DT probing for their clocks
 * lots of updates for sh-mobile
 * OMAP updates for clocks, power management and USB
 * i.mx6q and tegra now support cpuidle
 * kirkwood now supports PCIe hot plugging
 * tegra clock support is updated
 * tegra USB PHY probing gets implemented diffently
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyPGCrR//JCVInAQI4YA/+Nb0FaA7qMmTPuJhm7aZNfnwBcGxZ7IZp
 s2xByEl3r5zbLKlKGNGE0x7Q7ETHV4y9tohzi9ZduH2b60dMRYgII06CEmDPu6/h
 4vBap2oLzfWfs9hwpCIh7N9wNzxSj/R42vlXHhNmspHlw7cFk1yw5EeJ+ocxmZPq
 H9lyjAxsGErkZyM/xstNQ1Uvhc8XHAFSUzWrg8hvf6AVVR8hwpIqVzfIizv6Vpk6
 ryBoUBHfdTztAOrafK54CdRc7l6kVMomRodKGzMyasnBK3ZfFca3IR7elnxLyEFJ
 uPDu5DKOdYrjXC8X2dPM6kYiE41YFuqOV2ahBt9HqRe6liNBLHQ6NAH7f7+jBWSI
 eeWe84c2vFaqhAGlci/xm4GaP0ud5ZLudtiVPlDY5tYIADqLygNcx1HIt/5sT7QI
 h34LMjc4+/TGVWTVf5yRmIzTrCXZv5YoAak3UWFoM4nVBo/eYVyNLEt5g9YsfjrC
 P/GWrXJJvOCB3gAi31pgGYJzZg8K7kTTAh/dgxjqzU4f6nGRm5PBydiJe18/lWkH
 qtfNE0RbhxCi3JEBnxW48AIEndVSRbd7jf8upC/s9rPURtFSVXp4APTHVyNUKCip
 gojBxcRYtesyG/53nrwdTyiyHx6GocmWnMNZJoDo0UQEkog2dOef+StdC3zhc2Vm
 9EttcFqWJ+E=
 =PRrg
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...
2013-02-21 15:27:22 -08:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Linus Torvalds 460dc1eecf Sound updates for 3.9-rc1
The biggest change in this update is the unification of HD-audio codec
 parsers.  Now the HD-audio codec is parsed in a generic parser code
 which is invoked by each HD-audio codec driver.  Some background
 information is found in David Henningsson's blog entry:
   http://voices.canonical.com/david.henningsson/2013/01/18/upcoming-changes-to-the-intel-hda-drivers/
 
 Other than that, some random updates/fixes like USB-audio and a bunch
 of small AoC updates as usual.
 
 Highlights:
 
 - Unification of HD-audio parser code (aka generic parser)
 
 - Support of new Intel HD-audio controller, new IDT codecs
 
 - Fixes for HD-audio HDMI audio hotplug
 
 - Haswell HDMI audio fixup
 
 - Support of Creative CA0132 DSP code
 
 - A few fixes of HDSP driver
 
 - USB-audio fix for Roland A-PRO, M-Audio FT C600
 
 - Support PM for aloop driver (and fixes Oops)
 
 - Compress API updates for gapless playback support
 
 For ASoC part:
 
 - Support for a wider range of hardware in the compressed stream code
 
 - The ability to mute capture streams as well as playback streams while
   inactive
 
 - DT support for AK4642, FSI, Samsung I2S and WM8962
 
 - AC'97 support for Tegra
 
 - New driver for max98090, replacing the stub which was there
 
 - A new driver from Dialog
 
 Note that due to dependencies, DTification of DMA support for Samsung
 platforms (used only by the and I2S driver and SPI) is merged here as
 well.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRJjy2AAoJEGwxgFQ9KSmk4EoP/RRslXfGAb+lrWeehmh9oHQL
 P4JX+Cgv4OFFxaVjU7IgdjBCCnUNZoQ/Nm8wnpDbF+qP7DTcryPnuwWH8oaHLFSJ
 +knbbbOShC6hxUzd+ZbxQpEn+4mupSC9+egzczz0wcK1kzAf8CO/rj17t3VxsoW/
 Qa1yCWy6jbOmLu3JDpJTPyLfwA3x4/i3ViyTYfqgLP5kQHZZiv1eA9b682HFX9xQ
 uDQipb040k7wBLoeZosR8iF/EDuPHls8H2ASCmZw0K2scZgBok0SkI6BBwsCg2z3
 VbD9EkZmobRHwmubfDV1yCti050YnwGUbrN9tNpdSdv2cogKCkkxQ+zL8PX6Qf0l
 D1neA9JJPhSMx5fufDnG5oTghx/XlHsTJKmrJNu8Gr/14pAmSbNF8iIOFfYju++2
 LlpHLlwS4hxNYY0W3iAFTXi50BUng38tdhBCyZTgN2tSHaTwtdWvrVyizjpUa18N
 onjvFtceULtudddosJWkaKUSqHLN/CWmIWXufucfjxEk5exXjPBMhYTsvhmM3I5D
 zrK0GxUQqey7RToa48Sxs0iL269labUwH/8H1iMTL3/9UCCOqVRKR3X7NdGi3xtK
 EiEiCeNoZX8PojGqSEkmRifOJ19gBxchZDNO4ruct0Omc4Jn/nOlHbi4jXghgr9H
 D62m5PriiCnyBswjzKaX
 =nIPc
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "The biggest change in this update is the unification of HD-audio codec
  parsers.  Now the HD-audio codec is parsed in a generic parser code
  which is invoked by each HD-audio codec driver.

  Some background information is found in David Henningsson's blog
  entry:

      http://voices.canonical.com/david.henningsson/2013/01/18/upcoming-changes-to-the-intel-hda-drivers/

  Other than that, some random updates/fixes like USB-audio and a bunch
  of small AoC updates as usual.

  Highlights:

   - Unification of HD-audio parser code (aka generic parser)

   - Support of new Intel HD-audio controller, new IDT codecs

   - Fixes for HD-audio HDMI audio hotplug

   - Haswell HDMI audio fixup

   - Support of Creative CA0132 DSP code

   - A few fixes of HDSP driver

   - USB-audio fix for Roland A-PRO, M-Audio FT C600

   - Support PM for aloop driver (and fixes Oops)

   - Compress API updates for gapless playback support

  For ASoC part:

   - Support for a wider range of hardware in the compressed stream code

   - The ability to mute capture streams as well as playback streams
     while inactive

   - DT support for AK4642, FSI, Samsung I2S and WM8962

   - AC'97 support for Tegra

   - New driver for max98090, replacing the stub which was there

   - A new driver from Dialog

  Note that due to dependencies, DTification of DMA support for Samsung
  platforms (used only by the and I2S driver and SPI) is merged here as
  well."

Fix up trivial conflict in drivers/spi/spi-s3c64xx.c due to removed code
being changed.

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (453 commits)
  ALSA: usb: Fix Processing Unit Descriptor parsers
  ALSA: hda - hdmi: Notify userspace when ELD control changes
  ALSA: hda - hdmi: Protect ELD buffer
  ALSA: hda - hdmi: Refactor hdmi_eld into parsed_hdmi_eld
  ALSA: hda - hdmi: Do not expose eld data when eld is invalid
  ALSA: hda - hdmi: ELD shouldn't be valid after unplug
  ALSA: hda - Fix the silent speaker output on Fujitsu S7020 laptop
  ALSA: hda - add quirks for mute LED on two HP machines
  ALSA: usb/quirks, fix out-of-bounds access
  ASoC: codecs: Add da7213 codec
  ALSA: au88x0 - Define channel map for au88x0
  ALSA: compress: add support for gapless playback
  ALSA: hda - Remove speaker clicks on CX20549
  ALSA: hda - Disable runtime PM for Intel 5 Series/3400
  ALSA: hda - Increase badness for missing multi-io
  ASoC: arizona: Automatically manage input mutes
  ALSA: hda - Fix broken workaround for HDMI/SPDIF conflicts
  ALSA: hda/ca0132 - Add missing \n to debug prints
  ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESS
  ALSA: hda - update documentation for no-primary-hp fixup
  ...
2013-02-21 11:34:25 -08:00
Linus Torvalds b3cdda2b4f Device tree changes for v3.9
All around device tree changes destined for v3.8. Aside from the
 documentation updates the highlights in this branch include:
 - Kbuild changes for using CPP with .dts files
 - locking fix from preempt_rt patchset
 - include DT alias names in device uevent
 - Selftest bugfixes and improvements
 - New function for counting phandles stanzas in a property
 - constify argument to of_node_full_name()
 - Various bug fixes
 
 This tree did also contain a commit to use platform_device_add instead
 of open-coding the device add code, but it caused problems with amba
 devices and needed to be reverted.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRI3ZoAAoJEEFnBt12D9kBW0EP/2hTN9cS3b0CMyhh+PVUWZKu
 U+pTMbXBfomYC/9vWEBEpnYQSZuBXA+Sow3ubkRk6p6qjwYi0NUuAE4reQHLwvji
 u9nL7v9WNr4WXqUpMSgSzoxzPkvr2mfrHWRU2adaKpr+p4UvjbYNG1SxppqTJGji
 HThYNsgfdFzNvO7xtFTJGpMe3UhWfazdnVc/rg1csqex2UCZMqmSf1VjNqQIGt+t
 zH6jcCSZY96rX9f+HgdL9rvZyGSjDSIHRllpuG+8u5N3N1CSzbKPe4zSia3mlsC3
 g6g3bOihGJYeG2sc1RzHSdI6ANCn3RTuuA4xQBe/xCKvZIMRNNtzsf2Kbbah0ISG
 NW1WW3KRnq85sEdwv9gtFeMoalZ/sTV1O9m3vG9Xz2XgzWgf7c0V/7ukpFuTpQby
 NiFoTbc7K2E8J/fa8NhKfR4myzNKr3peJ6mJEMMn6PkdQwnOh1AC9l5iuDzMsdvk
 IGY8YvR1qY32IW68E42JQdteZP45EBzEgD9NjU7gRGI6nu2g5czv/VFztjiom4qd
 XahvdsfuVlCitRG8g2CHgBtEsjStYUmCa+gnIoycX7HhMShwYRX/cxA7Yife2UGV
 k+GUKCkGpHOLIoiAEHq+BdEv7amuJsqglJ5kvjL01m80k7JDGJqq8H9UUZ6yOCqe
 iXERO1R4HezNVFtMDrLO
 =Zlkx
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree changes from Grant Likely:
 "All around device tree changes destined for v3.8.  Aside from the
  documentation updates the highlights in this branch include:

   - Kbuild changes for using CPP with .dts files
   - locking fix from preempt_rt patchset
   - include DT alias names in device uevent
   - Selftest bugfixes and improvements
   - New function for counting phandles stanzas in a property
   - constify argument to of_node_full_name()
   - Various bug fixes

  This tree did also contain a commit to use platform_device_add instead
  of open-coding the device add code, but it caused problems with amba
  devices and needed to be reverted."

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits)
  Revert "of: use platform_device_add"
  kbuild: limit dtc+cpp include path
  gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()
  of: Create function for counting number of phandles in a property
  of/base: Clean up exit paths for of_parse_phandle_with_args()
  of/selftest: Use selftest() macro throughout
  of/selftest: Fix GPIOs selftest to cover the 7th case
  of: fix recursive locking in of_get_next_available_child()
  documentation/devicetree: Fix a typo in exynos-dw-mshc.txt
  OF: convert devtree lock from rw_lock to raw spinlock
  of/exynos_g2d: Add Bindings for exynos G2D driver
  kbuild: create a rule to run the pre-processor on *.dts files
  input: Extend matrix-keypad device tree binding
  devicetree: Move NS2 LEDs binding into LEDs directory
  of: use platform_device_add
  powerpc/5200: Fix size to request_mem_region() call
  documentation/devicetree: Fix typos
  of: add 'const' to of_node_full_name parameter
  of: Output devicetree alias names in uevent
  DT: add vendor prefixes for Renesas and Toshiba
  ...
2013-02-20 11:04:46 -08:00
Linus Torvalds 3aad3f03b2 SPI changes for v3.9
Changes to both core spi code and spi device drivers. The driver
 changes are the usual set of bug fixes and platform enablement. Core
 code changes include:
 - More intelligent assignment of SPI bus numbers when using DT
 - Common mechanism for using gpios as CS lines
 - Pull checks for bits_per_word and transfer speed out of drivers and
   into core code
 - Ensure temporary DMA buffers are DMA safe
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRI3g7AAoJEEFnBt12D9kB0acQAIaAOqN0Hvae/EtIl7Z40k3q
 DgLuFh6lSzhp690rbM/ULYQtJwxEyIvl0dMRPzMGcw+/tfbZIVEc8VmKJKu6/Qlr
 eMadyxlOtMn/KOcp0e8Yirhgg9o7aeeBo/tpF0jptu6VnVA4eJRMC/Z1EceJaF0+
 cWlwkd/53nzYyg+HLPHWRGiN0JjmC3qzFEBBosWRSBYH1qgjdkSXt7qCxQTHBM8x
 EfjSdIE2O5p4itJ+//M7qV1+MraPvjrFh3wdqIve+XCudqfjy/yUsxMu0TF2zkmd
 mim35J0q/2raxqtA4gc+kfhQsfmiSXXJ0gi054Z/PE9OnS0Ed4/+z5j2aIJDZ41W
 oOrac10Xs1Krdi1zMx0fMoRplKV7xsjXEJ/xDl4k/Gwa86q/3etyQbr+uAG0VCQb
 zN3a3iHx8TK+69sbMJwdImR8Wm5hWEqK0HGYFoV0F31oIeB1Z/pXoqUmpuI2J9Nb
 S2CZb2Ed1KEOokCQjF89m4eOjk8AwAqw6KHBGIY0oCqhvVbmKPXkG/pRZ8d11whV
 fm51MS4YWKgNw1+agExW+62bfJ0WQpu2CvSzgx7lXiEytxKcw7vCxW8Etp3+Ybs+
 1ZF95OnzhiCqwUfulfQ7br6Ax03ATMFJ/Xm63i8b4m2n1TOYLq3/Bn+POaL2K6o8
 chFiIdp7GCGqwT/Tgahy
 =DR18
 -----END PGP SIGNATURE-----

Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux

Pull SPI changes from Grant Likely:
 "Changes to both core spi code and spi device drivers.  The driver
  changes are the usual set of bug fixes and platform enablement.

  Core code changes include:

   - More intelligent assignment of SPI bus numbers when using DT

   - Common mechanism for using gpios as CS lines

   - Pull checks for bits_per_word and transfer speed out of drivers and
     into core code

   - Ensure temporary DMA buffers are DMA safe"

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux: (50 commits)
  spi: Document cs_gpios and cs_gpio in kernel-doc
  spi/of: Fix initialization of cs_gpios array
  spi/pxa2xx: add support for Lynxpoint SPI controllers
  spi/pxa2xx: add support for Intel Low Power Subsystem SPI
  spi/pxa2xx: add support for SPI_LOOP
  spi/pxa2xx: add support for runtime PM
  spi/pxa2xx: add support for DMA engine
  spi/pxa2xx: break out the private DMA API usage into a separate file
  spi/ath79: add shutdown handler
  spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag
  spi/mips-lantiq: make use of spi_finalize_current_message
  spi/bcm63xx: work around inability to keep CS up
  spi/davinci: use request_threaded_irq() to fix deadlock
  spi/orion: Use module_platform_driver()
  spi/bcm63xx: reject transfers unable to transfer
  spi: Ensure memory used for spi_write_then_read() is DMA safe
  spi/spi-mpc512x-psc: init mode bits supported by the driver
  spi/mpc512x-psc: don't use obsolet cell-index property
  spi: Remove erroneous __init, __exit and __exit_p() references in drivers
  spi/s3c64xx: fix checkpatch warnings and error
  ...
2013-02-20 11:03:22 -08:00
Grant Likely e80beb27d2 gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()
This patch replaces the horribly coded of_count_named_gpios() with a
call to of_count_phandle_with_args() which is far more efficient. This
also changes the return value of of_gpio_count() & of_gpio_named_count()
from 'unsigned int' to 'int' so that it can return an error code. All
the users of that function are fixed up to correctly handle a negative
return value.

v2: Split GPIO portion into a separate patch

Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
2013-02-13 10:11:53 +00:00
Andreas Larsson 0da83bb1c9 spi/of: Fix initialization of cs_gpios array
Using memset does not set an array of integers properly. Replace with a
loop to set each element properly.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-10 23:59:55 +00:00
Grant Likely 0d73299ddf Merge branch spi-next from git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-09 16:02:44 +00:00
Mika Westerberg a3496855d9 spi/pxa2xx: add support for Lynxpoint SPI controllers
Intel Lynxpoint PCH Low Power Subsystem has two general purpose SPI
controllers that are LPSS_SSP compatible. These controllers are enumerated
from ACPI namespace with ACPI IDs INT33C0 and INT33C1.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08 13:15:34 +00:00
Mika Westerberg a0d2642e92 spi/pxa2xx: add support for Intel Low Power Subsystem SPI
Intel LPSS SPI is pretty much the same as the PXA27xx SPI except that it
has few additional features over the original:

	o FIFO depth is 256 entries
	o RX FIFO has one watermark
	o TX FIFO has two watermarks, low and high
	o chip select can be controlled by writing to a register

The new FIFO registers follow immediately the PXA27xx registers but then there
are some additional LPSS private registers at offset 1k or 2k from the base
address. For these private registers we add new accessors that take advantage
of drv_data->lpss_base once it is resolved.

We add a new type LPSS_SSP that can be used to distinguish the LPSS devices
from others.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08 13:14:40 +00:00
Mika Westerberg b833172fd8 spi/pxa2xx: add support for SPI_LOOP
This is useful when testing the functionality of the controller from userspace
and there aren't any real SPI slave devices connected to the bus.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08 12:15:36 +00:00
Mika Westerberg 7d94a50585 spi/pxa2xx: add support for runtime PM
Drivers should put the device into low power states proactively whenever the
device is not in use. Thus implement support for runtime PM and use the
autosuspend feature to make sure that we can still perform well in case we see
lots of SPI traffic within short period of time.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08 12:15:32 +00:00
Mika Westerberg 5928808ef6 spi/pxa2xx: add support for DMA engine
To be able to use DMA with this driver on non-PXA platforms we implement
support for the generic DMA engine API. This lets user to use different DMA
engines with little or no modification to the driver.

Request lines and channel numbers can be passed to the driver from the
platform specific data.

The DMA engine implementation will be selected by default even on PXA
platform. User can select the legacy DMA API by enabling Kconfig option
CONFIG_SPI_PXA2XX_PXADMA.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08 12:15:28 +00:00
Mika Westerberg cd7bed0034 spi/pxa2xx: break out the private DMA API usage into a separate file
The PXA SPI driver uses PXA platform specific private DMA implementation
which does not work on non-PXA platforms. In order to use this driver on
other platforms we break out the private DMA implementation into a separate
file that gets compiled only when CONFIG_SPI_PXA2XX_PXADMA is set. The DMA
functions are stubbed out if there is no DMA implementation selected (i.e
we are building on non-PXA platform).

While we are there we can kill the dummy DMA bits in pxa2xx_spi.h as they
are not needed anymore for CE4100.

Once this is done we can add the generic DMA engine support to the driver
that allows usage of any DMA controller that implements DMA engine API.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08 12:15:21 +00:00
Clark Williams 8bd75c77b7 sched/rt: Move rt specific bits into new header file
Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h

Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-07 20:51:08 +01:00
Michał Mirosław 9f3b795a62 driver-core: constify data for class_find_device()
All in-kernel users of class_find_device() don't really need mutable
data for match callback.

In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c)
this patch changes match callbacks to use const search data.

The const is propagated to rtc_class_open() and power_supply_get_by_name()
parameters.

Note that there's a dev reference leak in suspend_test.c that's not
touched in this patch.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 12:18:56 -08:00
Gabor Juhos 7410e84858 spi/ath79: add shutdown handler
The SPI controller of the AR7xxx/AR9xxx SoCs
have a special mode which allows the SoC to
directly read data from SPI flash chips. In
this mode, the content of the SPI flash chip
can be accessed via a memory mapped region.

During early init time, the kernel expects
that the flash chip is accessible through
that memory region because it reads board
specific values (e.g. MAC address, WiFi
calibration data) from the flash on various
boards.

This is working if the kernel is loaded
directly by the bootloader because that
leaves the SPI controller in the special
mode. However it is not working in a kexec'd
kernel because the SPI driver does not restore
the special mode during shutdown.

The patch adds a shutdown handler to fix this
issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-06 10:41:12 +00:00
John Crispin ec3eaeca91 spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag
Due to hardware limitations of the spi/flash frontend of the EBU we need to set
the SPI_MASTER_HALF_DUPLEX flag.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 17:16:55 +00:00
John Crispin 737a7c4380 spi/mips-lantiq: make use of spi_finalize_current_message
Rather than calling m->complete() directly we choose the sane way and call
spi_finalize_current_message instead.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 17:16:41 +00:00
Jonas Gorski b17de07606 spi/bcm63xx: work around inability to keep CS up
This SPI controller does not support keeping CS asserted after sending
a transfer.
Since messages expected on this SPI controller are rather short, we can
work around it for normal use cases by sending all transfers at once in
a big full duplex stream.

This means that we cannot change the speed between transfers if they
require CS to be kept asserted, but these would have been rejected
before anyway because of the inability of keeping CS asserted.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 17:14:33 +00:00
Murali Karicheri 32310aaf5c spi/davinci: use request_threaded_irq() to fix deadlock
With RT pre-empt patch applied to Linux kernel, the irq handler will be
force converted to an irq thread. spi driver can get back to back messages
from the slave device. In such cases, IRQ thread doesn't get a chance to
run to read the slave data. Hence the irq handler must be run in hard irq
context to read/write data from slave device. Otherwise, the kernel goes
into a deadlock. This patch fixes this issue when PREEMPT_RT_FULL is
enabled in the kernel. A dummy thread function is provided to satisfy the
request_threaded_irq() API. Passing a NULL for function also causes the
irq handler to be executed in the thread context.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 17:12:26 +00:00
Ezequiel Garcia 41ab724aac spi/orion: Use module_platform_driver()
This patch reduces and simplifies initalization code by
using module_platform_driver().
With this change it's necessary to remove the __init annotation
to avoid section mismatch warnings.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:44:14 +00:00
Jonas Gorski c0fde3ba0e spi/bcm63xx: reject transfers unable to transfer
The hardware does not support keeping CS asserted after sending one
FIFO buffer worth of data, so reject transfers requiring CS being kept
asserted, either between transers or for a certain time after it,
or exceeding the FIFO size.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:44:13 +00:00
Mark Brown 2cd94c8a1b spi: Ensure memory used for spi_write_then_read() is DMA safe
Use GFP_DMA in order to ensure that the memory we allocate for transfers
in spi_write_then_read() can be DMAed. On most platforms this will have
no effect.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:44:13 +00:00
Anatolij Gustschin c88dd349b5 spi/spi-mpc512x-psc: init mode bits supported by the driver
The driver should setup mode bits it supports, otherwise
adding an SPI device might fail even if the driver supports
the requested SPI mode.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:44:12 +00:00
Anatolij Gustschin 9d15a3bac3 spi/mpc512x-psc: don't use obsolet cell-index property
Remove deprecated cell-index property and use spi alias to
obtain the SPI PSC number used for SPI bus id.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:44:12 +00:00
Grant Likely 2deff8d602 spi: Remove erroneous __init, __exit and __exit_p() references in drivers
Some of the spi driver module remove hooks were annotated with __exit
and referenced with __exit_p(). Presumably these were supposed to be
__devinit, __devexit and __devexit_p() since __init/__exit for a
probe/remove hook has never been correct. They also got missed during
the big __devinit/__devexit purge since they didn't match the pattern.
Remove then now to be rid of it.

v2: purge __init also

Reported-by: Arnd Bergmann <arnd@arndb.de>
[Arnd set a patch cleaning up one, and then I found more]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:43:16 +00:00
Jingoo Han 75bf336110 spi/s3c64xx: fix checkpatch warnings and error
Fix checkpatch warnings and error as below:
  ERROR: "foo * bar" should be "foo *bar"
  WARNING: please, no space before tabs
  WARNING: quoted string split across lines
  WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:21:54 +00:00
Jingoo Han 4eb770067f spi/s3c64xx: Use devm_clk_get() and devm_request_irq()
Use devm_clk_get() and devm_request_irq() rather than clk_get() and
request_irq() to make cleanup paths more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:19:43 +00:00
Fabio Estevam 3133fba3bb spi/imx: Add MODULE_ALIAS()
Add an entry for MODULE_ALIAS().

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:17:12 +00:00
Laxman Dewangan beb96c2ad4 spi/tegra: remove checks for valid speed
SPI core make sure that all transfer has proper speed set
before calling low level spi transfer. Hence, it is not
require to have check in spi driver.

Remove the check for speed validity from transfer and use it directly.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:11:53 +00:00
Laxman Dewangan 059b8ffeee spi: make sure all transfer has proper speed set
When spi client does the spi transfer and if it does not set
the speed for each transfer then set it as default
of spi device in spi core before calling low level transfer.

This will remove the extra check in low level driver for setting
speed.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 13:11:03 +00:00
Gabor Juhos c4a31f4300 spi/ath79: avoid multiple initialization of the SPI controller
Currently we are initializing the SPI controller in
the chip select line function, and that function is
called once for each SPI device on the bus. If a
board has multiple SPI devices, the controller will
be initialized multiple times.

Introduce ath79_spi_{en,dis}able helper functions,
and call those from probe/response in order to avoid
the mutliple initialization of the controller.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:59:47 +00:00
Gabor Juhos 95d79419fe spi/ath79: use gpio_request_one
Use gpio_request_one() instead of multiple gpiolib calls.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:58:55 +00:00
Gabor Juhos f1e8fc9898 spi/ath79: remove superfluous chip select code
The spi_bitbang driver calls the chipselect function
of the driver from spi_bitbang_setup in order to
deselect the given SPI chip, so we don't have to
initialize the CS line here.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:58:18 +00:00
Gabor Juhos 72611db0ee spi/ath79: add missing HIGH->LOW SCK transition
The 'ath79_spi_txrx_mode0' function does not
set the SCK signal to LOW at the end of a word
transfer. This causes communications errors with
certain devices (e.g. the PCF2123 RTC chip).

The patch ensures that the SCK signal will be LOW.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:57:45 +00:00
Gabor Juhos 440114fdb1 spi/ath79: add delay between SCK changes
The driver uses the "as fast as it can" approach
to drive the SCK signal. However this does not
work with certain low speed SPI chips (e.g. the
PCF2123 RTC chip).

The patch adds per-bit slowdowns in order to be
able to use the driver with such chips as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:57:02 +00:00
Juha Lumme ba486a2a29 mxs/spi: clear XFER_COUNT in ctrl0 field in DMA descriptor
On MX23 the XFER_COUNT part in ctrl0 field in DMA descriptor was
improperly OR'd during the construction of DMA descriptor chain, instead
of being freshly set.  Because of that too many bytes were being
expected from SPI during the last DMA cycle.  This caused a timeout
(SSP_TIMEOUT) to happen in the processing of the last DMA descriptor,
and thus reads and writes were failing.  This is a fix for the problem,
by clearing XFER_COUNT bytes in ctrl0 before setting the new XFER_COUNT
for DMA descriptor.

Signed-off-by: Juha Lumme <juha.lumme@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:45:24 +00:00
Barry Song f3b8a8ecc5 spi/sirf: add support for new SiRFmarco SMP SoC
the driver is also compatible with SiRFmarco except SiRFprimaII,
so simply add "sirf,marco-spi" to OF match table.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:43:18 +00:00
Barry Song e5118cd2c2 spi/sirf: use clk_prepare_enable and clk_disable_unprepare
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:43:00 +00:00
Grant Likely f305a0a8d7 Merge branch 'broonie/spi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git
Minor features and bug fixes for PXA, OMAP and GPIO deivce drivers and a
cosmetic change to the bitbang driver.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:30:13 +00:00
Laxman Dewangan 766ed70447 spi: remove check for bits_per_word on transfer from low level driver
The spi core make sure that each transfer structure have the proper
setting for bits_per_word before calling low level transfer APIs.

Hence it is no more require to check again in low level driver for
this field whether this is set correct or not. Removing such code
from low level driver.

The txx9 change also removes a test for bits_per_word set to 0, and
forcing it to 8 in that case. This can also be removed now since
spi_setup() ensures spi->bits_per_word is not zero.

	if (!spi->bits_per_word)
		spi->bits_per_word = 8;

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:26:59 +00:00
Grant Likely bb29785e0d spi/of: Use DT aliases for assigning bus number
Linux assigns a number to each spi_master in the system, but when the
platform used the device tree, the numbers are dynamically assigned and
are not predictable. In general this shouldn't matter since the kernel
doesn't use the bus number for anything other than matching a bus to
spi_boardinfo (not used for DT). However, sometimes userspace needs to
figure out which bus is which, so it makes sense to use the global
/aliases namespace to choose a specific bus number.

It is safe to derive the bus number from an alias because aliases will
never cause two buses to try and use the same bus number. (At one time
the cell-index property was used for this purpose, but cell-index has
the risk of an id collision).

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05 12:26:59 +00:00
Bastian Hecht cf9c86efec spi/sh-msiof: Add device tree parsing to driver
This adds the capability to retrieve setup data from the device tree
node. The usage of platform data is still available.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:26:58 +00:00
Murali Karicheri aae7147dfc spi/davinci: add OF support for the spi controller
This adds OF support to DaVinci SPI controller to configure platform
data through device bindings. Also replaces clk_enable() with
of clk_prepare_enable() as well as clk_disable() with
clk_disable_unprepare().

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:26:57 +00:00
Felipe Balbi 830379e048 spi/omap2: disable DMA requests before complete()
No actual errors have been found for completing
before disabling DMA request lines, but it just
looks more semantically correct that on our DMA
callback we quiesce the whole thing before stating
transfer is finished.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:26:57 +00:00
Padmavathi Venna b5be04d35d spi: s3c64xx: Modify SPI driver to use generic DMA DT support
This patch modifies the SPI driver to use generic dma dt bindings
support. This passes all the required arguments to dma dev request
functon which in turn calls the dma_request_slave_channel or dma__
request_channel based on DT or non-DT respectively.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29 14:28:52 +08:00
Prashant Gaikwad 3cb919022a spi: tegra: do not use clock name to get clock
Since Tegra spi devices do not have multiple clocks, no need to use
clock name to get the clock.

Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28 11:19:33 -07:00
Prashant Gaikwad 61fd290d21 ARM: tegra: migrate to new clock code
Migrate Tegra clock support to drivers/clk/tegra, this involves
moving:
1. definition of tegra_cpu_car_ops to clk.c
2. definition of reset functions to clk-peripheral.c
3. change parent of cpu clock.
4. Remove legacy clock initialization.
5. Initialize clocks using DT.
6. Remove all instance of mach/clk.h

Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: use to_clk_periph_gate().]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28 11:19:07 -07:00
Matthias Brugger 5cbc7ca987 spi: spi-omap2-mcspi.c: Toggle CS after each word
This patch allows the board code to define SPI devices which needs to
toggle the chip select after every word send. This is needed to get a
better resolution reading e.g. an ADC data stream.
Apart from that, as in the normal code CS is controlled by software,
a transfer is done much faster.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26 17:00:04 +08:00