Commit Graph

496 Commits

Author SHA1 Message Date
Linus Torvalds 1f6e05171b Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier
  genirq: Fix fatfinered fixup really
  genirq: percpu: allow interrupt type to be set at enable time
  genirq: Add support for per-cpu dev_id interrupts
  genirq: Add IRQCHIP_SKIP_SET_WAKE flag
2011-10-26 16:44:09 +02:00
Linus Torvalds 8a9ea3237e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.
2011-10-25 13:25:22 +02:00
Linus Torvalds 04a8752485 Merge branches 'stable/drivers-3.2', 'stable/drivers.bugfixes-3.2' and 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/drivers-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xenbus: don't rely on xen_initial_domain to detect local xenstore
  xenbus: Fix loopback event channel assuming domain 0
  xen/pv-on-hvm:kexec: Fix implicit declaration of function 'xen_hvm_domain'
  xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel
  xen/pv-on-hvm kexec: update xs_wire.h:xsd_sockmsg_type from xen-unstable
  xen/pv-on-hvm kexec+kdump: reset PV devices in kexec or crash kernel
  xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports
  xen/pv-on-hvm kexec: prevent crash in xenwatch_thread() when stale watch events arrive

* 'stable/drivers.bugfixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Check if the device is found instead of blindly assuming so.
  xen/pciback: Do not dereference psdev during printk when it is NULL.
  xen: remove XEN_PLATFORM_PCI config option
  xen: XEN_PVHVM depends on PCI
  xen/pciback: double lock typo
  xen/pciback: use mutex rather than spinlock in vpci backend
  xen/pciback: Use mutexes when working with Xenbus state transitions.
  xen/pciback: miscellaneous adjustments
  xen/pciback: use mutex rather than spinlock in passthrough backend
  xen/pciback: use resource_size()

* 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: support multi-segment systems
  xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.
  xen/pci: make bus notifier handler return sane values
  xen-swiotlb: fix printk and panic args
  xen-swiotlb: Fix wrong panic.
  xen-swiotlb: Retry up three times to allocate Xen-SWIOTLB
  xen-pcifront: Update warning comment to use 'e820_host' option.
2011-10-25 09:19:36 +02:00
Linus Torvalds 31018acd4c Merge branches 'stable/bug.fixes-3.2' and 'stable/mmu.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m/debugfs: Make type_name more obvious.
  xen/p2m/debugfs: Fix potential pointer exception.
  xen/enlighten: Fix compile warnings and set cx to known value.
  xen/xenbus: Remove the unnecessary check.
  xen/irq: If we fail during msi_capability_init return proper error code.
  xen/events: Don't check the info for NULL as it is already done.
  xen/events: BUG() when we can't allocate our event->irq array.

* 'stable/mmu.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Fix selfballooning and ensure it doesn't go too far
  xen/gntdev: Fix sleep-inside-spinlock
  xen: modify kernel mappings corresponding to granted pages
  xen: add an "highmem" parameter to alloc_xenballooned_pages
  xen/p2m: Use SetPagePrivate and its friends for M2P overrides.
  xen/p2m: Make debug/xen/mmu/p2m visible again.
  Revert "xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set."
2011-10-25 09:17:47 +02:00
Konrad Rzeszutek Wilk d98b15db37 xen/xenbus: Remove the unnecessary check.
.. we check whether 'xdev' is NULL - but there is no need for
it as the 'dev' check is done before. The 'dev' is embedded in
the 'xdev' so having xdev != NULL with dev being being checked
is not going to happen.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-19 17:03:29 -04:00
Konrad Rzeszutek Wilk e6599225db xen/irq: If we fail during msi_capability_init return proper error code.
There are three different modes: PV, HVM, and initial domain 0. In all
the cases we would return -1 for failure instead of a proper error code.
Fix this by propagating the error code from the generic IRQ code.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-19 17:03:28 -04:00
Konrad Rzeszutek Wilk 9bb9efe4ba xen/events: Don't check the info for NULL as it is already done.
The list operation checks whether the 'info' structure that is
retrieved from the list is NULL (otherwise it would not been able
to retrieve it). This check is not neccessary.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-19 17:03:26 -04:00
Konrad Rzeszutek Wilk 9d093e2958 xen/events: BUG() when we can't allocate our event->irq array.
In case we can't allocate we are doomed. We should BUG_ON
instead of trying to dereference it later on.

Acked-by: Ian Campbell <ian.campbell@citrix.com>
[v1: Use BUG_ON instead of BUG]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-19 17:03:25 -04:00
Konrad Rzeszutek Wilk 4645bf3067 xen/pciback: Check if the device is found instead of blindly assuming so.
Just in case it is not found, don't try to dereference it.

[v1: Added WARN_ON, suggested by Jan Beulich <JBeulich@suse.com>]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-19 17:01:10 -04:00
Konrad Rzeszutek Wilk 72bf809a19 xen/pciback: Do not dereference psdev during printk when it is NULL.
.. instead use BUG_ON() as all the callers of the kill_domain_by_device
check for psdev.

Suggested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-19 16:58:17 -04:00
Ian Campbell 9bab0b7fba genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier
This adds a mechanism to resume selected IRQs during syscore_resume
instead of dpm_resume_noirq.

Under Xen we need to resume IRQs associated with IPIs early enough
that the resched IPI is unmasked and we can therefore schedule
ourselves out of the stop_machine where the suspend/resume takes
place.

This issue was introduced by 676dc3cf5b "xen: Use IRQF_FORCE_RESUME".

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1318713254.11016.52.camel@dagon.hellion.org.uk
Cc: stable@kernel.org (at least to 2.6.32.y)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-10-17 11:42:49 +02:00
Dan Magenheimer 38a1ed4f03 xen: Fix selfballooning and ensure it doesn't go too far
The balloon driver's "current_pages" is very different from
totalram_pages.  Self-ballooning needs to be driven by
the latter.  Also, Committed_AS doesn't account for pages
used by the kernel so:
1) Add totalreserve_pages to Committed_AS for the normal target.
2) Enforce a floor for when there are little or no user-space threads
   using memory (e.g. single-user mode) to avoid OOMs.  The floor
   function includes a "min_usable_mb" tuneable in case we discover
   later that the floor function is still too aggressive in some
   workloads, though likely it will not be needed.

Changes since version 4:
- change floor calculation so that it is not as aggressive; this version
  uses a piecewise linear function similar to minimum_target in the 2.6.18
  balloon driver, but modified to add to totalreserve_pages instead of
  subtract from max_pfn, the 2.6.18 version causes OOMs on recent kernels
  because the kernel has expanded over time
- change safety_margin to min_usable_mb and comment on its use
- since committed_as does NOT include kernel space (and other reserved
  pages), totalreserve_pages is now added to committed_as.  The result is
  less aggressive self-ballooning, but theoretically more appropriate.
Changes since version 3:
- missing include causes compile problem when CONFIG_FRONTSWAP is disabled
- add comments after includes
Changes since version 2:
- missing include causes compile problem only on 32-bit
Changes since version 1:
- tuneable safety margin added

[v5: avi.miller@oracle.com: still too aggressive, seeing some OOMs]
[v4: konrad.wilk@oracle.com: fix compile when CONFIG_FRONTSWAP is disabled]
[v3: guru.anbalagane@oracle.com: fix 32-bit compile]
[v2: konrad.wilk@oracle.com: make safety margin tuneable]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Altered description and added an extra include]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14 12:36:08 -04:00
Daniel De Graaf 1f1503ba09 xen/gntdev: Fix sleep-inside-spinlock
BUG: sleeping function called from invalid context at /local/scratch/dariof/linux/kernel/mutex.c:271
in_atomic(): 1, irqs_disabled(): 0, pid: 3256, name: qemu-dm
1 lock held by qemu-dm/3256:
 #0:  (&(&priv->lock)->rlock){......}, at: [<ffffffff813223da>] gntdev_ioctl+0x2bd/0x4d5
Pid: 3256, comm: qemu-dm Tainted: G        W   3.1.0-rc8+ #5
Call Trace:
 [<ffffffff81054594>] __might_sleep+0x131/0x135
 [<ffffffff816bd64f>] mutex_lock_nested+0x25/0x45
 [<ffffffff8131c7c8>] free_xenballooned_pages+0x20/0xb1
 [<ffffffff8132194d>] gntdev_put_map+0xa8/0xdb
 [<ffffffff816be546>] ? _raw_spin_lock+0x71/0x7a
 [<ffffffff813223da>] ? gntdev_ioctl+0x2bd/0x4d5
 [<ffffffff8132243c>] gntdev_ioctl+0x31f/0x4d5
 [<ffffffff81007d62>] ? check_events+0x12/0x20
 [<ffffffff811433bc>] do_vfs_ioctl+0x488/0x4d7
 [<ffffffff81007d4f>] ? xen_restore_fl_direct_reloc+0x4/0x4
 [<ffffffff8109168b>] ? lock_release+0x21c/0x229
 [<ffffffff81135cdd>] ? rcu_read_unlock+0x21/0x32
 [<ffffffff81143452>] sys_ioctl+0x47/0x6a
 [<ffffffff816bfd82>] system_call_fastpath+0x16/0x1b

gntdev_put_map tries to acquire a mutex when freeing pages back to the
xenballoon pool, so it cannot be called with a spinlock held. In
gntdev_release, the spinlock is not needed as we are freeing the
structure later; in the ioctl, only the list manipulation needs to be
under the lock.

Reported-and-Tested-By: Dario Faggioli <dario.faggioli@citrix.com>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14 10:02:10 -04:00
Daniel De Graaf e4184aaf3b xenbus: don't rely on xen_initial_domain to detect local xenstore
The xenstore daemon does not have to run in the xen initial domain;
however, Linux currently uses xen_initial_domain to test if a loopback
event channel should be used instead of the event channel provided in
Xen's start_info structure. Instead, if the event channel passed in the
start_info structure is not valid, assume that this domain will run
xenstored locally and set up the event channel.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14 09:25:18 -04:00
Daniel De Graaf 77447991b6 xenbus: Fix loopback event channel assuming domain 0
The xenbus event channel established in xenbus_init is intended to be a
loopback channel, but the remote domain was hardcoded to 0; this will
cause the channel to be unusable when xenstore is not being run in
domain 0.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14 09:25:17 -04:00
David Vrabel 8b5d44a5ac xen: allow balloon driver to use more than one memory region
Allow the xen balloon driver to populate its list of extra pages from
more than one region of memory.  This will allow platforms to provide
(for example) a region of low memory and a region of high memory.

The maximum possible number of extra regions is 128 (== E820MAX) which
is quite large so xen_extra_mem is placed in __initdata.  This is safe
as both xen_memory_setup() and balloon_init() are in __init.

The balloon regions themselves are not altered (i.e., there is still
only the one region).

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 11:12:10 -04:00
David Vrabel b1cbf9b1d6 xen/balloon: simplify test for the end of usable RAM
When initializing the balloon only max_pfn needs to be checked
(max_pfn will always be <= e820_end_of_ram_pfn()) and improve the
confusing comment.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 11:12:09 -04:00
David Vrabel aa24411b67 xen/balloon: account for pages released during memory setup
In xen_memory_setup() pages that occur in gaps in the memory map are
released back to Xen.  This reduces the domain's current page count in
the hypervisor.  The Xen balloon driver does not correctly decrease
its initial current_pages count to reflect this.  If 'delta' pages are
released and the target is adjusted the resulting reservation is
always 'delta' less than the requested target.

This affects dom0 if the initial allocation of pages overlaps the PCI
memory region but won't affect most domU guests that have been setup
with pseudo-physical memory maps that don't have gaps.

Fix this by accouting for the released pages when starting the balloon
driver.

If the domain's targets are managed by xapi, the domain may eventually
run out of memory and die because xapi currently gets its target
calculations wrong and whenever it is restarted it always reduces the
target by 'delta'.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 11:12:09 -04:00
Stefano Stabellini 5fbdc10395 xen: remove XEN_PLATFORM_PCI config option
Xen PVHVM needs xen-platform-pci, on the other hand xen-platform-pci is
useless in any other cases.
Therefore remove the XEN_PLATFORM_PCI config option and compile
xen-platform-pci built-in if XEN_PVHVM is selected.

Changes to v1:

- remove xen-platform-pci.o and just use platform-pci.o since it is not
externally visible anymore.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 10:52:16 -04:00
Dan Carpenter e1db4cef89 xen/pciback: double lock typo
We called mutex_lock() twice instead of unlocking.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 10:50:26 -04:00
Stefano Stabellini 0930bba674 xen: modify kernel mappings corresponding to granted pages
If we want to use granted pages for AIO, changing the mappings of a user
vma and the corresponding p2m is not enough, we also need to update the
kernel mappings accordingly.
Currently this is only needed for pages that are created for user usages
through /dev/xen/gntdev. As in, pages that have been in use by the
kernel and use the P2M will not need this special mapping.
However there are no guarantees that in the future the kernel won't
start accessing pages through the 1:1 even for internal usage.

In order to avoid the complexity of dealing with highmem, we allocated
the pages lowmem.
We issue a HYPERVISOR_grant_table_op right away in
m2p_add_override and we remove the mappings using another
HYPERVISOR_grant_table_op in m2p_remove_override.
Considering that m2p_add_override and m2p_remove_override are called
once per page we use multicalls and hypercall batching.

Use the kmap_op pointer directly as argument to do the mapping as it is
guaranteed to be present up until the unmapping is done.
Before issuing any unmapping multicalls, we need to make sure that the
mapping has already being done, because we need the kmap->handle to be
set correctly.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v1: Removed GRANT_FRAME_BIT usage]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 10:32:58 -04:00
Stefano Stabellini 693394b8c3 xen: add an "highmem" parameter to alloc_xenballooned_pages
Add an highmem parameter to alloc_xenballooned_pages, to allow callers to
request lowmem or highmem pages.

Fix the code style of free_xenballooned_pages' prototype.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 09:56:52 -04:00
Konrad Rzeszutek Wilk cf177fd049 xen/pciback: Add flag indicating device has been assigned by Xen
Device drivers that create and destroy SR-IOV virtual functions via
calls to pci_enable_sriov() and pci_disable_sriov can cause catastrophic
failures if they attempt to destroy VFs while they are assigned to
guest virtual machines.  By adding a flag for use by the Xen PCI back
to indicate that a device is assigned a device driver can check that
flag and avoid destroying VFs while they are assigned and avoid system
failures.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27 00:48:34 -04:00
Konrad Rzeszutek Wilk 5b25d89e19 xen/pv-on-hvm:kexec: Fix implicit declaration of function 'xen_hvm_domain'
Randy found a compile error when using make randconfig to trigger

drivers/xen/xenbus/xenbus_xs.c:909:2: error: implicit declaration of function 'xen_hvm_domain'

it is unclear which of the CONFIG options triggered this. This
patch fixes the error.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-26 13:17:55 -04:00
Olaf Hering ddacf5ef68 xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel
Add new xs_reset_watches function to shutdown watches from old kernel after
kexec boot.  The old kernel does not unregister all watches in the
shutdown path.  They are still active, the double registration can not
be detected by the new kernel.  When the watches fire, unexpected events
will arrive and the xenwatch thread will crash (jumps to NULL).  An
orderly reboot of a hvm guest will destroy the entire guest with all its
resources (including the watches) before it is rebuilt from scratch, so
the missing unregister is not an issue in that case.

With this change the xenstored is instructed to wipe all active watches
for the guest.  However, a patch for xenstored is required so that it
accepts the XS_RESET_WATCHES request from a client (see changeset
23839:42a45baf037d in xen-unstable.hg). Without the patch for xenstored
the registration of watches will fail and some features of a PVonHVM
guest are not available. The guest is still able to boot, but repeated
kexec boots will fail.

[v5: use xs_single instead of passing a dummy string to xs_talkv]
[v4: ignore -EEXIST in xs_reset_watches]
[v3: use XS_RESET_WATCHES instead of XS_INTRODUCE]
[v2: move all code which deals with XS_INTRODUCE into xs_introduce()
    (based on feedback from Ian Campbell); remove casts from kvec assignment]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
[v1: Redid the git description a bit]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-22 16:32:24 -04:00
Jan Beulich 55e901fc1f xen/pci: support multi-segment systems
Now that the hypercall interface changes are in -unstable, make the
kernel side code not ignore the segment (aka domain) number anymore
(which results in pretty odd behavior on such systems). Rather, if
only the old interfaces are available, don't call them for devices on
non-zero segments at all.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v1: Edited git description]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-22 16:23:46 -04:00
Konrad Rzeszutek Wilk 74d33dedc2 xen/pciback: use mutex rather than spinlock in vpci backend
Similar to the "xen/pciback: use mutex rather than spinlock in passthrough backend"
this patch converts the vpci backend to use a mutex instead of
a spinlock. Note that the code taking the lock won't ever get called
from non-sleepable context

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21 18:18:18 -04:00
Konrad Rzeszutek Wilk b1766b6289 xen/pciback: Use mutexes when working with Xenbus state transitions.
The caller that orchestrates the state changes is xenwatch_thread
and it takes a mutex. In our processing of Xenbus states we can take
the luxery of going to sleep on a mutex, so lets do that and
also fix this bug:

BUG: sleeping function called from invalid context at /linux/kernel/mutex.c:271
in_atomic(): 1, irqs_disabled(): 0, pid: 32, name: xenwatch
2 locks held by xenwatch/32:
 #0:  (xenwatch_mutex){......}, at: [<ffffffff813856ab>] xenwatch_thread+0x4b/0x180
 #1:  (&(&pdev->dev_lock)->rlock){......}, at: [<ffffffff8138f05b>] xen_pcibk_disconnect+0x1b/0x80
Pid: 32, comm: xenwatch Not tainted 3.1.0-rc6-00015-g3ce340d #2
Call Trace:
 [<ffffffff810892b2>] __might_sleep+0x102/0x130
 [<ffffffff8163b90f>] mutex_lock_nested+0x2f/0x50
 [<ffffffff81382c1c>] unbind_from_irq+0x2c/0x1b0
 [<ffffffff8110da66>] ? free_irq+0x56/0xb0
 [<ffffffff81382dbc>] unbind_from_irqhandler+0x1c/0x30
 [<ffffffff8138f06b>] xen_pcibk_disconnect+0x2b/0x80
 [<ffffffff81390348>] xen_pcibk_frontend_changed+0xe8/0x140
 [<ffffffff81387ac2>] xenbus_otherend_changed+0xd2/0x150
 [<ffffffff810895c1>] ? get_parent_ip+0x11/0x50
 [<ffffffff81387de0>] frontend_changed+0x10/0x20
 [<ffffffff81385712>] xenwatch_thread+0xb2/0x180

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21 18:18:16 -04:00
Jan Beulich 402c5e15b4 xen/pciback: miscellaneous adjustments
This is a minor bugfix and a set of small cleanups; as it is not clear
whether this needs splitting into pieces (and if so, at what
granularity), it is a single combined patch.
- add a missing return statement to an error path in
  kill_domain_by_device()
- use pci_is_enabled() rather than raw atomic_read()
- remove a bogus attempt to zero-terminate an already zero-terminated
  string
- #define DRV_NAME once uniformly in the shared local header
- make DRIVER_ATTR() variables static
- eliminate a pointless use of list_for_each_entry_safe()
- add MODULE_ALIAS()
- a little bit of constification
- adjust a few messages
- remove stray semicolons from inline function definitions

Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v1: Dropped the resource_size fix, altered the description]
[v2: Fixed cleanpatch.pl comments]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21 18:17:59 -04:00
Jan Beulich 04df355227 xen/pciback: use mutex rather than spinlock in passthrough backend
To accommodate the call to the callback function from
__xen_pcibk_publish_pci_roots(), which so far dropped and the re-
acquired the lock without checking that the list didn't actually
change, convert the code to use a mutex instead (observing that the
code taking the lock won't ever get called from non-sleepable
context).

As a result, drop the bogus use of list_for_each_entry_safe() and
remove the inappropriate dropping of the lock.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21 16:51:23 -04:00
Thomas Meyer 5fa99911a3 xen/pciback: use resource_size()
Use resource_size function on resource object
 instead of explicit computation.

 The semantic patch that makes this output is available
 in scripts/coccinelle/api/resource_size.cocci.

 More information about semantic patching is available at
 http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21 16:21:42 -04:00
Konrad Rzeszutek Wilk 7736594836 xen/irq: Alter the locking to use a mutex instead of a spinlock.
When we allocate/change the IRQ informations, we do not
need to use spinlocks. We can use a mutex (which is
what the generic IRQ code does for allocations/changes).
Fixes a slew of:

BUG: sleeping function called from invalid context at /linux/kernel/mutex.c:271
in_atomic(): 1, irqs_disabled(): 0, pid: 3216, name: xenstored
2 locks held by xenstored/3216:
 #0:  (&u->bind_mutex){......}, at: [<ffffffffa02e0920>] evtchn_ioctl+0x30/0x3a0 [xen_evtchn]
 #1:  (irq_mapping_update_lock){......}, at: [<ffffffff8138b274>] bind_evtchn_to_irq+0x24/0x90
Pid: 3216, comm: xenstored Not tainted 3.1.0-rc6-00021-g437a3d1 #2
Call Trace:
 [<ffffffff81088d10>] __might_sleep+0x100/0x130
 [<ffffffff81645c2f>] mutex_lock_nested+0x2f/0x50
 [<ffffffff81627529>] __irq_alloc_descs+0x49/0x200
 [<ffffffffa02e0920>] ? evtchn_ioctl+0x30/0x3a0 [xen_evtchn]
 [<ffffffff8138b214>] xen_allocate_irq_dynamic+0x34/0x70
 [<ffffffff8138b2ad>] bind_evtchn_to_irq+0x5d/0x90
 [<ffffffffa02e03c0>] ? evtchn_bind_to_user+0x60/0x60 [xen_evtchn]
 [<ffffffff8138c282>] bind_evtchn_to_irqhandler+0x32/0x80
 [<ffffffffa02e03a9>] evtchn_bind_to_user+0x49/0x60 [xen_evtchn]
 [<ffffffffa02e0a34>] evtchn_ioctl+0x144/0x3a0 [xen_evtchn]
 [<ffffffff811b4070>] ? vfsmount_lock_local_unlock+0x50/0x80
 [<ffffffff811a6a1a>] do_vfs_ioctl+0x9a/0x5e0
 [<ffffffff811b476f>] ? mntput+0x1f/0x30
 [<ffffffff81196259>] ? fput+0x199/0x240
 [<ffffffff811a7001>] sys_ioctl+0xa1/0xb0
 [<ffffffff8164ea82>] system_call_fastpath+0x16/0x1b

Reported-by: Jim Burns <jim_burn@bellsouth.net>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-15 04:32:02 -04:00
Olaf Hering 116df6f004 xen/pv-on-hvm kexec+kdump: reset PV devices in kexec or crash kernel
After triggering a crash dump in a HVM guest, the PV backend drivers
will remain in Connected state. When the kdump kernel starts the PV
drivers will skip such devices. As a result, no root device is found and
the vmcore cant be saved.

A similar situation happens after a kexec boot, here the devices will be
in the Closed state.

With this change all frontend devices with state XenbusStateConnected or
XenbusStateClosed will be reset by changing the state file to Closing ->
Closed -> Initializing.  This will trigger a disconnect in the backend
drivers. Now the frontend drivers will find the backend drivers in state
Initwait and can connect.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
[v2:
  - add timeout when waiting for backend state change
  (based on feedback from Ian Campell)
  - extent printk message to include backend string
  - add comment to fall-through case in xenbus_reset_frontend]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-01 11:49:03 -04:00
Olaf Hering 62cc5fc7b2 xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports
During a kexec boot some virqs such as timer and debugirq were already
registered by the old kernel.  The hypervisor will return -EEXISTS from
the new EVTCHNOP_bind_virq request and the BUG in bind_virq_to_irq()
triggers.  Catch the -EEXISTS error and loop through all possible ports to find
what port belongs to the virq/cpu combo.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
[v2:
  - use NR_EVENT_CHANNELS instead of private MAX_EVTCHNS]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-01 11:48:54 -04:00
Olaf Hering c4c303c7c5 xen/pv-on-hvm kexec: prevent crash in xenwatch_thread() when stale watch events arrive
During repeated kexec boots xenwatch_thread() can crash because
xenbus_watch->callback is cleared by xenbus_watch_path() if a node/token
combo for a new watch happens to match an already registered watch from
an old kernel.  In this case xs_watch returns -EEXISTS, then
register_xenbus_watch() does not remove the to-be-registered watch from
the list of active watches but returns the -EEXISTS to the caller
anyway.

Because the watch is still active in xenstored it will cause an event
which will arrive in the new kernel. process_msg() will find the
encapsulated struct xenbus_watch in its list of registered watches and
puts the "empty" watch handle in the queue for xenwatch_thread().
xenwatch_thread() then calls ->callback which was cleared earlier by
xenbus_watch_path().

To prevent that crash in a guest running on an old xen toolstack remove
the special -EEXIST handling.

v2:
 - remove the EEXIST handing in register_xenbus_watch() instead of
   checking for ->callback in process_msg()

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
2011-09-01 11:48:29 -04:00
Konrad Rzeszutek Wilk 6810df88dc xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.
The process to swizzle a Machine Frame Number (MFN) is not always
necessary. Especially if we know that we actually do not have to do it.
In this patch we check the MFN against the device's coherent
DMA mask and if the requested page(s) are contingous. If it all checks
out we will just return the bus addr without doing the memory
swizzle.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-26 12:10:42 -04:00
Jan Beulich 12e13ac84c xen/pci: make bus notifier handler return sane values
Notifier functions are expected to return NOTIFY_* codes, not -E...
ones. In particular, since the respective hypercalls failing is not
fatal to the operation of the Dom0 kernel, it must be avoided to
return negative values here as those would make it appear as if
NOTIFY_STOP_MASK wa set, suppressing further notification calls to
other interested parties (which is also why we don't want to use
notifier_from_errno() here).

While at it, also notify the user of a failed hypercall.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
[v1: Added dev_err and the disable MSI/MSI-X call]
[v2: Removed the disable MSI/MSI-X call]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-26 12:10:18 -04:00
Randy Dunlap 61ca79831c xen-swiotlb: fix printk and panic args
Fix printk() and panic() args [swap them] to fix build warnings:

drivers/xen/swiotlb-xen.c:201: warning: format '%s' expects type 'char *', but argument 2 has type 'int'
drivers/xen/swiotlb-xen.c:201: warning: format '%d' expects type 'int', but argument 3 has type 'char *'
drivers/xen/swiotlb-xen.c:202: warning: format '%s' expects type 'char *', but argument 2 has type 'int'
drivers/xen/swiotlb-xen.c:202: warning: format '%d' expects type 'int', but argument 3 has type 'char *'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-26 12:10:17 -04:00
Konrad Rzeszutek Wilk ab2a47bd24 xen-swiotlb: Fix wrong panic.
Propagate the baremetal git commit "swiotlb: fix wrong panic"
(fba99fa38b) in the Xen-SWIOTLB version.
wherein swiotlb's map_page wrongly calls panic() when it can't find
a buffer fit for device's dma mask.  It should return an error instead.

Devices with an odd dma mask (i.e.  under 4G) like b44 network card hit
this bug (the system crashes):

http://marc.info/?l=linux-kernel&m=129648943830106&w=2

If xen-swiotlb returns an error, b44 driver can use the own bouncing
mechanism.

CC: stable@kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-26 12:10:16 -04:00
Konrad Rzeszutek Wilk f4b2f07b2e xen-swiotlb: Retry up three times to allocate Xen-SWIOTLB
We can fail seting up Xen-SWIOTLB if:
 - The host does not have enough contiguous DMA32 memory available
   (can happen on a machine that has fragmented memory from starting,
   stopping many guests).
 - Not enough low memory (almost never happens).

We retry allocating and exchanging the swath of contiguous memory
up to three times. Each time we decrease the amount we need  - the
minimum being of 2MB.

If we compleltly fail, we will print the reason for failure on the Xen
console on top of doing it to earlyprintk=xen console.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-26 12:10:15 -04:00
Randy Dunlap 4fec0e0bde xen: self-balloon needs module.h
Fix build errors (found when CONFIG_SYSFS is not enabled):

  drivers/xen/xen-selfballoon.c:446: warning: data definition has no type or storage class
  drivers/xen/xen-selfballoon.c:446: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
  drivers/xen/xen-selfballoon.c:446: warning: parameter names (without types) in function declaration
  drivers/xen/xen-selfballoon.c:485: error: expected declaration specifiers or '...' before string constant
  drivers/xen/xen-selfballoon.c:485: warning: data definition has no type or storage class
  drivers/xen/xen-selfballoon.c:485: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
  drivers/xen/xen-selfballoon.c:485: warning: function declaration isn't a prototype

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-16 07:23:34 -07:00
Randy Dunlap 30eefc9584 xen: xen-selfballoon.c needs more header files
Fix build errors (found when CONFIG_SYSFS is not enabled):

drivers/xen/xen-selfballoon.c:446: warning: data definition has no type or storage class
drivers/xen/xen-selfballoon.c:446: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
drivers/xen/xen-selfballoon.c:446: warning: parameter names (without types) in function declaration
drivers/xen/xen-selfballoon.c:485: error: expected declaration specifiers or '...' before string constant
drivers/xen/xen-selfballoon.c:485: warning: data definition has no type or storage class
drivers/xen/xen-selfballoon.c:485: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/xen/xen-selfballoon.c:485: warning: function declaration isn't a prototype

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-10 15:21:46 -04:00
Konrad Rzeszutek Wilk 65d4b24811 xen/self-balloon: Add dependency on tmem.
Without enabling CONFIG_XEN_TMEM we get this:

drivers/xen/xen-selfballoon.c:461: undefined reference to `tmem_enabled'

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-03 14:34:57 -04:00
Konrad Rzeszutek Wilk 61077b2c50 xen/balloon: Fix compile errors - missing header files.
With a specific enough .config file compile errors show
for missing workqueue declarations.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-03 14:34:55 -04:00
Konrad Rzeszutek Wilk f24144c0c3 xen/grant: Fix compile warning.
drivers/xen/grant-table.c:85: warning: ‘rc’ may be used uninitialized in this function

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-03 14:34:53 -04:00
Huang Weiyi 27a26b775a xen/pciback: remove duplicated #include
Remove duplicated #include('s) in
  drivers/xen/xen-pciback/xenbus.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-03 14:34:52 -04:00
Daniel Kiper 080e2be788 xen/balloon: memory hotplug support for Xen balloon driver
Memory hotplug support for Xen balloon driver.  It should be mentioned
that hotplugged memory is not onlined automatically.  It should be onlined
by user through standard sysfs interface.

Memory could be hotplugged in following steps:

  1) dom0: xl mem-max <domU> <maxmem>
     where <maxmem> is >= requested memory size,

  2) dom0: xl mem-set <domU> <memory>
     where <memory> is requested memory size; alternatively memory
     could be added by writing proper value to
     /sys/devices/system/xen_memory/xen_memory0/target or
     /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU,

  3) domU: for i in /sys/devices/system/memory/memory*/state; do \
             [ "`cat "$i"`" = offline ] && echo online > "$i"; done

Memory could be onlined automatically on domU by adding following line to
udev rules:

  SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"

In that case step 3 should be omitted.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
Linus Torvalds 111ad119d1 Merge branch 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
  xen/pciback: Remove the DEBUG option.
  xen/pciback: Drop two backends, squash and cleanup some code.
  xen/pciback: Print out the MSI/MSI-X (PIRQ) values
  xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
  xen: rename pciback module to xen-pciback.
  xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
  xen/pciback: Allocate IRQ handler for device that is shared with guest.
  xen/pciback: Disable MSI/MSI-X when reseting a device
  xen/pciback: guest SR-IOV support for PV guest
  xen/pciback: Register the owner (domain) of the PCI device.
  xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
  xen/pciback: xen pci backend driver.
  xen: tmem: self-ballooning and frontswap-selfshrinking
  xen: Add module alias to autoload backend drivers
  xen: Populate xenbus device attributes
  xen: Add __attribute__((format(printf... where appropriate
  xen: prepare tmem shim to handle frontswap
  xen: allow enable use of VGA console on dom0
2011-07-22 13:45:15 -07:00
Konrad Rzeszutek Wilk 3a6d28b11a Merge branch 'stable/xen-pciback-0.6.3' into stable/drivers
* stable/xen-pciback-0.6.3:
  xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
  xen/pciback: Remove the DEBUG option.
  xen/pciback: Drop two backends, squash and cleanup some code.
  xen/pciback: Print out the MSI/MSI-X (PIRQ) values
  xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
  xen: rename pciback module to xen-pciback.
  xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
  xen/pciback: Allocate IRQ handler for device that is shared with guest.
  xen/pciback: Disable MSI/MSI-X when reseting a device
  xen/pciback: guest SR-IOV support for PV guest
  xen/pciback: Register the owner (domain) of the PCI device.
  xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
  xen/pciback: xen pci backend driver.

Conflicts:
	drivers/xen/Kconfig
2011-07-20 15:33:51 -04:00
Konrad Rzeszutek Wilk 2ebdc42630 xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
.. compile options. This way the user can decide during runtime whether they
want the default 'vpci' (virtual pci passthrough) or where the PCI devices
are passed in without any BDF renumbering. The option 'passthrough' allows
the user to toggle the it from 0 (vpci) to 1 (passthrough).

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-19 21:04:20 -04:00