Commit Graph

55 Commits

Author SHA1 Message Date
Neil Horman c6a21d0b8d dma-debug: hash_bucket_find needs to allow for offsets within an entry
Summary:
Users of the pci_dma_sync_single_* api allow users to sync address ranges within
the range of a mapped entry (i.e. you can dma map address X to dma_addr_t A and
then pci_dma_sync_single on dma_addr_t A+1.  The dma-debug library however
assume dma syncs will always occur using the base address of a mapped region,
and uses that assumption to find entries in its hash table.  Since thats often
(but not always the case), the dma debug library can give us false errors about
missing entries, which are reported as syncing of memory not allocated by the
driver.  This was noted in the cxgb3 driver as this error:

WARNING: at lib/dma-debug.c:902 check_sync+0xdd/0x48c()
Hardware name: To be filled by O.E.M.
cxgb3 0000:01:00.0: DMA-API: device driver tries to sync DMA memory it has not
allocated [device address=0x00000000fff97800] [size=1984 bytes]
Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table
mperf ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 uinput
snd_hda_codec_intelhdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec
snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer e1000e snd soundcore r8169
cxgb3 iTCO_wdt snd_page_alloc mii shpchp i2c_i801 iTCO_vendor_support mdio
microcode firewire_ohci firewire_core crc_itu_t ata_generic pata_acpi i915
drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded:
scsi_wait_scan]
Pid: 1818, comm: ifconfig Not tainted 2.6.35-0.23.rc3.git6.fc14.x86_64 #1
Call Trace:
[<ffffffff81050f71>] warn_slowpath_common+0x85/0x9d
[<ffffffff8105102c>] warn_slowpath_fmt+0x46/0x48
[<ffffffff8124658e>] ? check_sync+0x39/0x48c
[<ffffffff8107c470>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff81246632>] check_sync+0xdd/0x48c
[<ffffffff81246ca6>] debug_dma_sync_single_for_device+0x3f/0x41
[<ffffffffa011615c>] ? pci_map_page+0x84/0x97 [cxgb3]
[<ffffffffa0117bc3>] pci_dma_sync_single_for_device.clone.0+0x65/0x6e [cxgb3]
[<ffffffffa0117ed1>] refill_fl+0x305/0x30a [cxgb3]
[<ffffffffa011857d>] t3_sge_alloc_qset+0x6a7/0x821 [cxgb3]
[<ffffffffa010a07b>] cxgb_up+0x4d0/0xe62 [cxgb3]
[<ffffffff81086037>] ? __module_text_address+0x12/0x58
[<ffffffffa010aa4c>] cxgb_open+0x3f/0x309 [cxgb3]
[<ffffffff813e9f6c>] __dev_open+0x8e/0xbc
[<ffffffff813e7ca5>] __dev_change_flags+0xbe/0x142
[<ffffffff813e9ea8>] dev_change_flags+0x21/0x57
[<ffffffff81445937>] devinet_ioctl+0x29a/0x54b
[<ffffffff811f9a87>] ? inode_has_perm+0xaa/0xce
[<ffffffff81446ed2>] inet_ioctl+0x8f/0xa7
[<ffffffff813d683a>] sock_do_ioctl+0x29/0x48
[<ffffffff813d6c83>] sock_ioctl+0x213/0x222
[<ffffffff81137f78>] vfs_ioctl+0x32/0xa6
[<ffffffff811384e2>] do_vfs_ioctl+0x47a/0x4b3
[<ffffffff81138571>] sys_ioctl+0x56/0x79
[<ffffffff81009c32>] system_call_fastpath+0x16/0x1b
---[ end trace 69a4d4cc77b58004 ]---

(some edits by Joerg Roedel)

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Jay Fenalson <fenlason@redhat.com>
CC: Divy LeRay <divy@chelsio.com>
CC: Stanislaw Gruszka <sgruszka@redhat.com>
CC: Joerg Roedel <joerg.roedel@amd.com>
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-08-23 15:36:00 +02:00
Stanislaw Gruszka ba4b87ad54 dma-debug: print information about leaked entry
When driver leak dma mapping, print additional information about one of
leaked entries, to to help investigate problem. Patch should be useful
for debugging drivers, which maps many different class of buffers.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2011-04-07 16:31:19 +02:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Dan Carpenter 39a37ce1cc dma-debug: Cleanup for copy-loop in filter_write()
Earlier in this function we set the last byte of "buf" to NULL so we
always hit the break statement and "i" is never equal to NAME_MAX_LEN.
This patch doesn't change how the driver works but it silences a Smatch
warning and it makes it clearer that we don't write past the end of the
array.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-04-07 14:36:27 +02:00
Joerg Roedel a02b11937a Merge branches 'amd-iommu/fixes' and 'dma-debug/fixes' into iommu/fixes 2010-01-22 18:00:41 +01:00
Thiago Farina aeb583d081 lib/dma-debug.c: mark file-local struct symbol static.
warning: symbol 'filter_fops' was not declared. Should it be static?

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-01-22 17:59:51 +01:00
Krzysztof Halasa 42d53b4ff7 dma-debug: allow DMA_BIDIRECTIONAL mappings to be synced with DMA_FROM_DEVICE and
There is no need to perform full BIDIR sync (copying the buffers in case
of swiotlb and similar schemes) if we know that the owner (CPU or device)
hasn't altered the data.

Addresses the false-positive reported at
http://bugzilla.kernel.org/show_bug.cgi?id=14169

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: David Miller <davem@davemloft.net>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:04 -08:00
Ingo Molnar a8fe9ea200 dma-debug: Fix bug causing build warning
Stephen Rothwell reported the following build warning:

 lib/dma-debug.c: In function 'dma_debug_device_change':
 lib/dma-debug.c:680: warning: 'return' with no value, in function returning non-void

Introduced by commit f797d9881b
("dma-debug: Do not add notifier when dma debugging is disabled").

Return 0 [notify-done] when disabled. (this is standard bus notifier behavior.)

Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <20091231125624.GA14666@liondog.tnic>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-31 15:16:23 +01:00
Shaun Ruffell f797d9881b dma-debug: Do not add notifier when dma debugging is disabled.
If CONFIG_HAVE_DMA_API_DEBUG is defined and "dma_debug=off" is
specified on the kernel command line, when you detach a driver from a
device you can cause the following NULL pointer dereference:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c0580d35>] dma_debug_device_change+0x5d/0x117

The problem is that the dma_debug_device_change notifier function is
added to the bus notifier chain even though the dma_entry_hash array
was never initialized.  If dma debugging is disabled, this patch both
prevents dma_debug_device_change notifiers from being added to the
chain, and additionally ensures that the dma_debug_device_change
notifier function is a no-op.

Cc: stable@kernel.org
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-12-21 15:10:12 +01:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Joerg Roedel 59a40e7045 dma-debug: Fix compile warning with PAE enabled
When PAE is enabled in the kernel configuration the size of
phys_addr_t differs from the size of a void pointer. The gcc
prints a warning about that in dma-debug code.
This patch fixes the warning by converting the output to
unsigned long long instead of a pointer.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-10-29 16:25:50 +01:00
Kyle McMartin ec9c96ef3c dma-debug: Fix check_unmap null pointer dereference
While it's debatable whether or not a NULL device argument to
the DMA API functions is valid... since it certainly isn't
valid on devices with an IOMMU... dma-debug really shouldn't be
dereferencing null pointers either.

Guard against that in err_printk and the driver_filter
functions. A Fedora rawhide user was seeing this in one of the
dvb drivers resulting in an oops on boot.

[ A patch has been sent for testing to the driver, but I feel
  the dma debugging support should be fixed as well. (There's
  still a pile of legacy garbage in the kernel passing null
  pointers to dma_{alloc,free}_*. :( ]

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Cc: mchehab@infradead.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20090820011708.GP25206@bombadil.infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-21 10:04:24 +02:00
Ingo Molnar f39d1b9792 dma-debug: Fix the overlap() function to be correct and readable
Linus noticed how unclean and buggy the overlap() function is:

 - It uses convoluted (and bug-causing) positive checks for
   range overlap - instead of using a more natural negative
   check.

 - Even the positive checks are buggy: a positive intersection
   check has four natural cases while we checked only for three,
   missing the (addr < start && addr2 == end) case for example.

 - The variables are mis-named, making it non-obvious how the
   check was done.

 - It needlessly uses u64 instead of unsigned long. Since these
   are kernel memory pointers and we explicitly exclude highmem
   ranges anyway we cannot ever overflow 32 bits, even if we
   could. (and on 64-bit it doesnt matter anyway)

All in one, this function needs a total revamp. I used Linus's
suggestions minus the paranoid checks (we cannot overflow really
because if we get totally bad DMA ranges passed far more things
break in the systems than just DMA debugging). I also fixed a
few other small details i noticed.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-10 22:18:45 +02:00
Ingo Molnar b0a5b83ee0 dma-debug: Put all hash-chain locks into the same lock class
Alan Cox reported that lockdep runs out of its stack-trace entries
with certain configs:

 BUG: MAX_STACK_TRACE_ENTRIES too low

This happens because there are 1024 hash buckets, each with a
separate lock. Lockdep puts each lock into a separate lock class and
tracks them independently.

But in reality we never take more than one of the buckets, so they
really belong into a single lock-class. Annotate the has bucket lock
init accordingly.

[ Impact: reduce the lockdep footprint of dma-debug ]

Reported-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-17 16:26:04 +02:00
Joerg Roedel c79ee4e466 dma-debug: fix off-by-one error in overlap function
This patch fixes a bug in the overlap function which returned true if
one region ends exactly before the second region begins. This is no
overlap but the function returned true in that case.

Cc: stable@kernel.org
Reported-by: Andrew Randrianasulu <randrik@mail.ru>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-16 12:29:40 +02:00
Joerg Roedel aa010efb7b dma-debug: be more careful when building reference entries
The current code is not very careful when it builds reference
dma_debug_entries which get passed to hash_bucket_find(). But since this
function changed to a best-fit algorithm these entries have to be more
acurate. This patch adds this higher level of accuracy.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-15 11:10:14 +02:00
Joerg Roedel e5e8c5b90a dma-debug: check for sg_call_ents in best-fit algorithm too
If we don't check for sg_call_ents the hash_bucket_find function might
still return the wrong dma_debug_entry for sg mappings.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-15 11:08:54 +02:00
Joerg Roedel 0bf841281e dma-debug: simplify logic in driver_filter()
This patch makes the driver_filter function more readable by
reorganizing the code. The removal of a code code block to an upper
indentation level makes hard-to-read line-wraps unnecessary.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-08 15:53:46 +02:00
Joerg Roedel be81c6ea23 dma-debug: disable/enable irqs only once in device_dma_allocations
There is no need to disable/enable irqs on each loop iteration. Just
disable irqs for the whole time the loop runs.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-08 15:46:19 +02:00
Joerg Roedel e7ed70eedc dma-debug: use pr_* instead of printk(KERN_* ...)
The pr_* macros are shorter than the old printk(KERN_ ...) variant.
Change the dma-debug code to use the new macros and save a few
unnecessary line breaks. If lines don't break the source code can also
be grepped more easily.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-08 15:39:24 +02:00
Joerg Roedel c17e2cf737 dma-debug: code style fixes
This patch changes the recent updates to dma-debug to conform with
coding style guidelines of Linux and the -tip tree.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-08 15:19:29 +02:00
Joerg Roedel 3123250947 dma-debug: comment style fixes
Last patch series introduced some new comment which does not fit the
Kernel comment style guidelines. Fix it with this patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-08 15:07:08 +02:00
Ingo Molnar 62a6f465f6 Merge branch 'dma-debug/2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu 2009-06-07 11:36:02 +02:00
Joerg Roedel 7caf6a49bb dma-debug: change hash_bucket_find from first-fit to best-fit
Some device drivers map the same physical address multiple times to a
dma address. Without an IOMMU this results in the same dma address being
put into the dma-debug hash multiple times. With a first-fit match in
hash_bucket_find() this function may return the wrong dma_debug_entry.

This can result in false positive warnings. This patch fixes it by
changing the first-fit behavior of hash_bucket_find() into a best-fit
algorithm.

Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reported-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: lethal@linux-sh.org
Cc: just.for.lkml@googlemail.com
Cc: hancockrwd@gmail.com
Cc: jens.axboe@oracle.com
Cc: bharrosh@panasas.com
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <20090605104132.GE24836@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-07 10:04:53 +02:00
Joerg Roedel bdc2911cde Merge branches 'dma-debug/fixes' and 'dma-debug/driver-filter' into dma-debug/2.6.31 2009-06-02 16:45:02 +02:00
Joerg Roedel 1745de5e56 dma-debug: add dma_debug_driver kernel command line
This patch add the dma_debug_driver= boot parameter to enable the driver
filter for early boot.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-02 16:21:41 +02:00
Joerg Roedel 8a6fc708b9 dma-debug: add debugfs file for driver filter
This patch adds the dma-api/driver_filter file to debugfs. The root user
can write a driver name into this file to see only dma-api errors for
that particular driver in the kernel log. Writing an empty string to
that file disables the driver filter.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-02 16:21:18 +02:00
Joerg Roedel 2e507d849f dma-debug: add variables and checks for driver filter
This patch adds the state variables for the driver filter and a function
to check if the filter is enabled and matches to the current device. The
check is built into the err_printk function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-06-02 14:54:55 +02:00
FUJITA Tomonori 88f3907f6f dma-debug: fix debug_dma_sync_sg_for_cpu and debug_dma_sync_sg_for_device
DMA-mapping.txt says that debug_dma_sync_sg family must be called with
the _same_ one you passed into the dma_map_sg call, it should _NOT_ be
the 'count' value _returned_ from the dma_map_sg call.

debug_dma_sync_sg_for_cpu and debug_dma_sync_sg_for_device can't
handle this properly; they need to use the sg_mapped_ents in struct
dma_debug_entry as debug_dma_unmap_sg() does.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-05-29 14:27:05 +02:00
FUJITA Tomonori 884d05970b dma-debug: use sg_dma_len accessor
debug_dma_map_sg() and debug_dma_unmap_sg() use length in struct
scatterlist while debug_dma_sync_sg_for_cpu() and
debug_dma_sync_sg_for_device() use dma_length. This causes bugs
warnings on some IOMMU implementations since these values are not
same; the length doesn't represent the dma length.

We always need to use sg_dma_len() accessor to get the dma length of a
scatterlist entry.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-05-29 14:26:55 +02:00
FUJITA Tomonori 15aedea439 dma-debug: use sg_dma_address accessor instead of using dma_address directly
Architectures might not have dma_address in struct scatterlist (PARISC
doesn't). Directly accessing to dma_address in struct scatterlist is
wrong; we need to use sg_dma_address() accesssor instead.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-05-29 14:26:42 +02:00
Joerg Roedel ed888aef42 dma-debug: re-add dma memory leak detection
This is basically a revert of commit 314eeac9 but now in a
fixed version.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-05-28 17:09:07 +02:00
Ingo Molnar 41fb454ebe Merge commit 'v2.6.30-rc5' into core/iommu
Merge reason: core/iommu was on an .30-rc1 base,
              update it to .30-rc5 to refresh.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 14:44:31 +02:00
Joerg Roedel 314eeac9e3 dma-debug: remove broken dma memory leak detection for 2.6.30
The feature needs some more work because the notfier which is used to
check for pending allocations is called before the device drivers
->remove() function. Therefore this feature reports false positives.

A real fix for this issue is to introduce a new notifier event which sent
_after_ the driver has deinitialized itself. That will done for the next
kernel version.

[ Impact: reduce the scope of CONFIG_DMA_API_DEBUG=y checks ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: iommu@lists.linux-foundation.org
LKML-Reference: <1240576557-22442-1-git-send-email-joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-26 18:23:56 +02:00
FUJITA Tomonori e6a1a89d57 dma-debug: add dma_debug_resize_entries() to adjust the number of dma_debug_entries
We use a static value for the number of dma_debug_entries. It can be
overwritten by a kernel command line option.

Some IOMMUs (e.g. GART) can't set an appropriate value by a kernel
command line option because they can't know such value until they
finish initializing up their hardware.

This patch adds dma_debug_resize_entries() enables IOMMUs to adjust
the number of dma_debug_entries anytime.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: fujita.tomonori@lab.ntt.co.jp
Cc: akpm@linux-foundation.org
LKML-Reference: <20090415182234R.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-15 12:22:37 +02:00
Randy Dunlap 93c36ed834 dma-debug: fix printk formats (i386)
Fix printk format warnings in dma-debug:

  lib/dma-debug.c:645: warning: format '%016llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'
  lib/dma-debug.c:662: warning: format '%016llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'
  lib/dma-debug.c:676: warning: format '%016llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'
  lib/dma-debug.c:686: warning: format '%016llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-30 14:28:59 -07:00
Joerg Roedel 9537a48ed4 dma-debug: make memory range checks more consistent
Impact: extend on-kernel-stack DMA debug checks to all !highmem pages

We only checked dma_map_single() - extend it to dma_map_page()
and dma_map_sg() as well.

Also, fix dma_map_single() corner case bug: make sure we dont
stack-check highmem (not mapped) pages.

Reported-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: iommu@lists.linux-foundation.org
LKML-Reference: <1237818908-26516-1-git-send-email-joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 08:39:32 +01:00
FUJITA Tomonori 35d40952db dma-debug: warn of unmapping an invalid dma address
Impact: extend DMA-debug checks

Calling dma_unmap families against an invalid dma address should be a
bug.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20090319103743N.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-19 08:39:48 +01:00
Joerg Roedel 41531c8f5f dma-debug: add a check dma memory leaks
Impact: allow architectures to monitor busses for dma mem leakage

This patch adds checking code to detect if a device has pending DMA
operations when it is about to be unbound from its device driver.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:49 +01:00
Joerg Roedel 2e34bde185 dma-debug: add checks for kernel text and rodata
Impact: get notified if a device dma maps illegal areas

This patch adds a check to print a warning message when a device driver
tries to map a memory area from the kernel text segment or rodata.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:48 +01:00
David Woodhouse 6c132d1bcd dma-debug: print stacktrace of mapping path on unmap error
Impact: saves stacktrace of a dma mapping and prints it if there is an  error

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-17 12:56:48 +01:00
David Woodhouse ac26c18bd3 dma-debug: add function to dump dma mappings
This adds a function to dump the DMA mappings that the debugging code is
aware of -- either for a single device, or for _all_ devices.

This can be useful for debugging -- sticking a call to it in the DMA
page fault handler, for example, to see if the faulting address _should_
be mapped or not, and hence work out whether it's IOMMU bugs we're
seeing, or driver bugs.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-17 12:56:39 +01:00
Joerg Roedel a31fba5d68 dma-debug: add checks for sync_single_sg_*
Impact: add debug callbacks for dma_sync_sg_* functions

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:21 +01:00
Joerg Roedel 948408ba3e dma-debug: add checks for sync_single_range_*
Impact: add debug callbacks for dma_sync_single_range_for_* functions

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:21 +01:00
Joerg Roedel b9d2317e0c dma-debug: add checks for sync_single_*
Impact: add debug callbacks for dma_sync_single_for_* functions

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:20 +01:00
Joerg Roedel 6bfd449876 dma-debug: add checking for [alloc|free]_coherent
Impact: add debug callbacks for dma_[alloc|free]_coherent

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:19 +01:00
Joerg Roedel 972aa45cea dma-debug: add add checking for map/unmap_sg
Impact: add debug callbacks for dma_{un}map_sg

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:18 +01:00
Joerg Roedel f62bc980e6 dma-debug: add checking for map/unmap_page/single
Impact: add debug callbacks for dma_{un}map_[page|single]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:18 +01:00
Joerg Roedel 2d62ece14f dma-debug: add core checking functions
Impact: add functions to check on dma unmap and sync

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:17 +01:00
Joerg Roedel 788dcfa6f1 dma-debug: add debugfs interface
Impact: add debugfs interface for configuring DMA-API debugging

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-03-05 20:35:16 +01:00