Commit Graph

287 Commits

Author SHA1 Message Date
Ang Way Chuang 5c331fc8c1 V4L/DVB: dvb-core: Fix ULE decapsulation bug
Fix ULE decapsulation bug when less than 4 bytes of ULE SNDU is packed
into the remaining bytes of a MPEG2-TS frame

ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation
code has a bug that incorrectly treats ULE SNDU packed into the
remaining 2 or 3 bytes of a MPEG2-TS frame as having invalid pointer
field on the subsequent MPEG2-TS frame.

Signed-off-by: Ang Way Chuang <wcang@nav6.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01 01:24:21 -03:00
Linus Torvalds f13771187b Merge branch 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing
* 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  uml: Pushdown the bkl from harddog_kern ioctl
  sunrpc: Pushdown the bkl from sunrpc cache ioctl
  sunrpc: Pushdown the bkl from ioctl
  autofs4: Pushdown the bkl from ioctl
  uml: Convert to unlocked_ioctls to remove implicit BKL
  ncpfs: BKL ioctl pushdown
  coda: Clean-up whitespace problems in pioctl.c
  coda: BKL ioctl pushdown
  drivers: Push down BKL into various drivers
  isdn: Push down BKL into ioctl functions
  scsi: Push down BKL into ioctl functions
  dvb: Push down BKL into ioctl functions
  smbfs: Push down BKL into ioctl function
  coda/psdev: Remove BKL from ioctl function
  um/mmapper: Remove BKL usage
  sn_hwperf: Kill BKL usage
  hfsplus: Push down BKL into ioctl function
2010-05-24 08:01:10 -07:00
Linus Torvalds f8965467f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20 21:04:44 -07:00
matthieu castet e36309f54a V4L/DVB: fix dvb frontend lockup
If my dvb device is removed while in use, I got the following oops:

[ 4920.484084] Call Trace:
[ 4920.484102]  [<c102daad>] ? default_wake_function+0x0/0x8
[ 4920.484147]  [<f8cb09e1>] ? dvb_unregister_frontend+0x95/0xcc [dvb_core]
[ 4920.484157]  [<c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484168]  [<f8dd1af2>] ? dvb_usb_adapter_frontend_exit+0x12/0x21 [dvb_usb]
[ 4920.484176]  [<f8dd12f1>] ? dvb_usb_exit+0x26/0x88 [dvb_usb]
[ 4920.484184]  [<f8dd138d>] ? dvb_usb_device_exit+0x3a/0x4a [dvb_usb]
[ 4920.484217]  [<f7fe1b08>] ? usb_unbind_interface+0x3f/0xb4 [usbcore]
[ 4920.484227]  [<c11a4178>] ? __device_release_driver+0x74/0xb7
[ 4920.484233]  [<c11a4247>] ? device_release_driver+0x15/0x1e
[ 4920.484243]  [<c11a3a33>] ? bus_remove_device+0x6e/0x87
[ 4920.484249]  [<c11a26d6>] ? device_del+0xfa/0x152
[ 4920.484264]  [<f7fdf609>] ? usb_disable_device+0x59/0xb9 [usbcore]
[ 4920.484279]  [<f7fdb9ee>] ? usb_disconnect+0x70/0xdc [usbcore]
[ 4920.484294]  [<f7fdc728>] ? hub_thread+0x521/0xe1d [usbcore]
[ 4920.484301]  [<c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484316]  [<f7fdc207>] ? hub_thread+0x0/0xe1d [usbcore]
[ 4920.484321]  [<c10441e0>] ? kthread+0x61/0x66
[ 4920.484327]  [<c104417f>] ? kthread+0x0/0x66
[ 4920.484336]  [<c1003d47>] ? kernel_thread_helper+0x7/0x10

If there are users (for example users == -2) :
 - dvb_unregister_frontend :
 - stop kernel thread with dvb_frontend_stop :
  - fepriv->exit = 1;
  - thread loop catch stop event and break while loop
  - fepriv->thread = NULL; and fepriv->exit = 0;
 - dvb_unregister_frontend wait on "fepriv->dvbdev->wait_queue" that fepriv->dvbdev->users==-1.
The user finish :
 - dvb_frontend_release - set users to -1
 - don't wait wait_queue because fepriv->exit != 1

=> dvb_unregister_frontend never exit the wait queue.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:59:15 -03:00
Abylay Ospan ab6a21f363 V4L/DVB: Allow to enable TS continuity and TEI check on loaded module
Current dvb_demux_tscheck processing doesn't allow to enable check on loaded
module. dvb_demux_tscheck can be enabled only when loading module (
dvb_dmx_init should be called to enable dvb_demux_tscheck ). This patch fix
this issue.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:46:32 -03:00
Arnd Bergmann 16ef8def80 dvb: Push down BKL into ioctl functions
This requires changing all users of dvb_usercopy to
omit the inode argument.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-17 05:27:04 +02:00
David S. Miller 871039f02f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c
2010-04-11 14:53:53 -07:00
Jiri Pirko 22bedad3ce net: convert multicast list to list_head
Converts the list and the core manipulating with it to be the same as uc_list.

+uses two functions for adding/removing mc address (normal and "global"
 variant) instead of a function parameter.
+removes dev_mcast.c completely.
+exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for
 manipulation with lists on a sandbox (used in bonding and 80211 drivers)

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:22:15 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jiri Pirko ff6e2163f2 net: convert multiple drivers to use netdev_for_each_mc_addr, part7
In mlx4, using char * to store mc address in private structure instead.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 21:23:25 -07:00
Jiri Kosina 318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
David S. Miller 47871889c6 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/firmware/iscsi_ibft.c
2010-02-28 19:23:06 -08:00
Linus Torvalds 2b8c70b217 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits)
  V4L-DVB: cx88-dvb: remove extra attribution for core
  V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index
  V4L/DVB: Add support for SMT7020 to cx88
  V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment
  V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix
  V4L/DVB: gspca_stv06xx: Add support for camera button
  V4L/DVB: gspca_ov519: add support for the button on ov511 based cams
  V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
  V4L/DVB: gspca_ov519: add support for the button on ov519 based cams
  V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set
  V4L/DVB: gspca_main: some input error handling fixes
  V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs
  V4L/DVB: gspca_pac7302: much improved exposure control
  V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras
  V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls
  V4L/DVB: Documentation: gspca.txt: update known mr97310a cams
  V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix
  V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480
  V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls
  V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl
  ...
2010-02-26 17:16:20 -08:00
Ang Way Chuang 29e1fa3565 dvb-core: Fix DoS bug in ULE decapsulation code that can be triggered by an invalid Payload Pointer
ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation
has a bug that causes endless loop when Payload Pointer of MPEG2-TS
frame is 182 or 183.  Anyone who sends malicious MPEG2-TS frame will
cause the receiver of ULE SNDU to go into endless loop.

This patch was generated and tested against linux-2.6.32.9 and should
apply cleanly to linux-2.6.33 as well because there was only one typo
fix to dvb_net.c since v2.6.32.

This bug was brought to you by modern day Santa Claus who decided to
shower the satellite dish at Keio University with heavy snow causing
huge burst of errors.  We, receiver end, received Santa Claus's gift in
the form of kernel bug.

Care has been taken not to introduce more bug by fixing this bug, but
please scrutinize the code for I always produces buggy code.

Signed-off-by: Ang Way Chuang <wcang79@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-26 17:15:44 -08:00
Oliver Endriss 126cd4bc5f V4L/DVB: DVB: Export dvb_ringbuffer_flush() again
Add EXPORT_SYMBOL(dvb_ringbuffer_flush) again,
replace my_dvb_ringbuffer_flush() in ngene driver.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:54 -03:00
Thiago Farina 6e3924aa8d V4L/DVB: dvb-core: remove unnecessary casting of kmalloc
drivers/media/dvb/dvb-core/dvb_frontend.c |    6 ++----

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:46 -03:00
Mauro Carvalho Chehab fb8253baa0 V4L/DVB (13879): dvb_frontend: report what ioctl were called on debug mode
When printing that an iocl were called, report the ioctl number.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:27 -03:00
Mauro Carvalho Chehab 639544d78c V4L/DVB (13878): dvb_frontend: Print dump on get after filling the data
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:27 -03:00
David S. Miller 2bb4646fce Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-02-16 22:09:29 -08:00
Jiri Pirko 4cd24eaf0c net: use netdev_mc_count and netdev_mc_empty when appropriate
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss
anything). Used spatch and did small tweaks and conding style changes when
it was suitable.

Jirka

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 11:38:58 -08:00
Daniel Mack 3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Francesco Lavra 691c9ae099 V4L/DVB: dvb-core: fix initialization of feeds list in demux filter
A DVB demultiplexer device can be used to set up either a PES filter or
a section filter. In the former case, the ts field of the feed union of
struct dmxdev_filter is used, in the latter case the sec field of the
same union is used.
The ts field is a struct list_head, and is currently initialized in the
open() method of the demux device. When for a given demuxer a section
filter is set up, the sec field is played with, thus if a PES filter
needs to be set up after that the ts field will be corrupted, causing a
kernel oops.
This fix moves the list head initialization to
dvb_dmxdev_pes_filter_set(), so that the ts field is properly
initialized every time a PES filter is set up.

Signed-off-by: Francesco Lavra <francescolavra@interfree.it>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Walls <awalls@radix.net>
Tested-by: hermann pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-08 10:47:17 -02:00
Mauro Carvalho Chehab bc081cc869 V4L/DVB: dvb_demux: Don't use vmalloc at dvb_dmx_swfilter_packet
As dvb_dmx_swfilter_packet() is protected by a spinlock, it shouldn't sleep.
However, vmalloc() may call sleep. So, move the initialization of
dvb_demux::cnt_storage field to a better place.

Reviewed-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-08 10:46:58 -02:00
Mauro Carvalho Chehab adefdceef4 V4L/DVB: Fix the risk of an oops at dvb_dmx_release
dvb_dmx_init tries to allocate virtual memory for 2 pointers: filter and feed.

If the second vmalloc fails, filter is freed, but the pointer keeps pointing
to the old place. Later, when dvb_dmx_release() is called, it will try to
free an already freed memory, causing an OOPS.

Reviewed-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-08 10:45:24 -02:00
hartleys 0e05a613f4 drivers/media/dvb/dvb-core/dvb_net.c: use %pM to show MAC address
Use the %pM kernel extension to display the MAC address and mask.

The only difference in the output is that the output is shown in
the usual colon-separated hex notation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07 01:13:58 -08:00
Linus Torvalds 3e74683137 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h
2009-12-09 19:50:49 -08:00
Jiri Kosina d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
Abylay Ospan 26b9d6c0b0 V4L/DVB (13271): TS speed check. Logging transport stream speed in Kbits per second
[mchehab@redhat.com: add asm/div64.h and allocate vars only if dvb_demux_speedcheck specified]
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:11 -02:00
Mauro Carvalho Chehab 06d3a396b2 V4L/DVB (13157): dvb_frontend: represent all DVBS2API commands via macro
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:37 -02:00
Michael Krufky 9133aee09e V4L/DVB (13103): create a standard method for dvb adapter drivers to override frontend ioctls
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:21 -02:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Andrew Morton 4c4cb1b160 drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h
Fixes:

  v4l/dvb_frontend.c: In function 'dvb_frontend_stop':
  v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX'

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609

Reported-by: <tstrelar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:19 -08:00
Dirk Hohndel 06fe9fb418 tree-wide: fix a very frequent spelling mistake
something-bility is spelled as something-blity
so a grep for 'blit' would find these lines

this is so trivial that I didn't split it by subsystem / copy
additional maintainers - all changes are to comments
The only purpose is to get fewer false positives when grepping
around the kernel sources.

Signed-off-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-09 09:40:54 +01:00
Alexey Dobriyan d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Alexey Dobriyan a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Alexey Dobriyan 828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Mauro Carvalho Chehab d4c02ef91b V4L/DVB (13038): dvbdev: Remove an anoying/uneeded warning
As pointed by Marcin Slusarz <marcin.slusarz@gmail.com>, the warns happens
because CONFIG_DVB_MAX_ADAPTERS depends on CONFIG_DVB_CORE, and there are
valid configs where DVB_CORE is not selected.

This causes such warnings, for every V4L and common drivers that may or
may not be compiled with DVB support:

drivers/media/dvb/dvb-core/dvbdev.h:36:2: warning: #warning invalid CONFIG_DVB_MAX_ADAPTERS value

We can safely remove the warning.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-22 21:54:00 -03:00
Linus Torvalds c720f5655d Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (222 commits)
  V4L/DVB (13033): pt1: Don't use a deprecated DMA_BIT_MASK macro
  V4L/DVB (13029): radio-si4713: remove #include <linux/version.h>
  V4L/DVB (13027): go7007: convert printks to v4l2_info
  V4L/DVB (13026): s2250-board: Implement brightness and contrast controls
  V4L/DVB (13025): s2250-board: Fix memory leaks
  V4L/DVB (13024): go7007: Implement vidioc_g_std and vidioc_querystd
  V4L/DVB (13023): go7007: Merge struct gofh and go declarations
  V4L/DVB (13022): go7007: Fix mpeg controls
  V4L/DVB (13021): go7007: Fix whitespace and line lengths
  V4L/DVB (13020): go7007: Updates to Kconfig and Makefile
  V4L/DVB (13019): video: initial support for ADV7180
  V4L/DVB (13018): kzalloc failure ignored in au8522_probe()
  V4L/DVB (13017): gspca: kmalloc failure ignored in sd_start()
  V4L/DVB (13016): kmalloc failure ignored in lgdt3304_attach() and s921_attach()
  V4L/DVB (13015): kmalloc failure ignored in m920x_firmware_download()
  V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part only)
  V4L/DVB (13013): FM TX: si4713: Kconfig: Fixed two typos.
  V4L/DVB (13012): uvc: introduce missing kfree
  V4L/DVB (13011): Change tuner type of BeholdTV cards
  V4L/DVB (13009): gspca - stv06xx-hdcs: Reduce exposure range
  ...
2009-09-21 09:03:10 -07:00
Kay Sievers e454cea20b Driver-Core: extend devnode callbacks to provide permissions
This allows subsytems to provide devtmpfs with non-default permissions
for the device node. Instead of the default mode of 0600, null, zero,
random, urandom, full, tty, ptmx now have a mode of 0666, which allows
non-privileged processes to access standard device nodes in case no
other userspace process applies the expected permissions.

This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 12:50:38 -07:00
HIRANO Takahito 98293ef3e5 V4L/DVB (12997): Add the DTV_ISDB_TS_ID property for ISDB_S
In ISDB-S, time-devision duplex is used to multiplexing several waves
in the same frequency. Each wave is identified by its own transport
stream ID, or TS ID. We need to provide some way to specify this ID
from user applications to handle ISDB-S frontends.

This code has been tested with the Earthsoft PT1 driver.

[mchehab@infradead.org: Fix merge conflicts with isdbt and rename the new parameter to DTV_ISDBS_TS_ID]
Signed-off-by: HIRANO Takahito <hiranotaka@zng.info>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:51:34 -03:00
Patrick Boettcher e7b7949a95 V4L/DVB (12896): ISDB-T: add mapping of LAYER_ENABLED to frontend-cache
It was forgotten to map the LAYER_ENABLED ioctl to the frontend-cache and back.

Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:14:25 -03:00
Patrick Boettcher b6e760f309 V4L/DVB (12892): DVB-API: add support for ISDB-T and ISDB-Tsb (version 5.1)
This patch increments the DVB-API to version 5.1 in order to reflect the addition of ISDB-T and ISDB-Tsb on Linux' DVB-API.

Changes in detail:
- added a small document to describe how to use the API to tune to an ISDB-T or ISDB-Tsb channel
- added necessary fields to dtv_frontend_cache
- added a smarter clear-cache function which resets all fields of the dtv_frontend_cache
- added a TRANSMISSION_MODE_4K to fe_transmit_mode_t

Signed-off-by: Olivier Grenie <olgrenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:14:24 -03:00
Linus Torvalds 043fe50f80 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (213 commits)
  V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2
  V4L/DVB (12713): em28xx: Cleanups at ir_i2c handler
  V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed
  V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent object
  V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a persistent object
  V4L/DVB (12698): em28xx: ir-kbd-i2c init data needs a persistent object
  V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111
  V4L/DVB (12706): gspca - sn9c20x: disable exposure/gain controls for MT9M111 sensors.
  V4L/DVB (12705): gspca - sn9c20x: Add SXGA support to SOI968
  V4L/DVB (12703): gspca - sn9c20x: Reduces size of object
  V4L/DVB (12704): gspca - sn9c20x: Fix exposure on SOI968 sensors
  V4L/DVB (12696): gspca - sonixj / sn9c102: Two drivers for 0c45:60fc and 0c45:613e.
  V4L/DVB (12695): gspca - vc032x: Do the LED work with the sensor hv7131r.
  V4L/DVB (12694): gspca - vc032x: Change the start exchanges of the sensor hv7131r.
  V4L/DVB (12693): gspca - sunplus: The brightness is signed.
  V4L/DVB (12692): gspca - sunplus: Optimize code.
  V4L/DVB (12691): gspca - sonixj: Don't use mdelay().
  V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added.
  V4L/DVB (12686): dvb-core: check supported QAM modulations
  V4L/DVB (12685): dvb-core: check fe->ops.set_frontend return value
  ...
2009-09-15 09:22:18 -07:00
Janne Grunau f51fad85af V4L/DVB (12686): dvb-core: check supported QAM modulations
Check the modulation in dvb_frontend_check_parameters against
frontend's capabilties for FE_QAM devices.

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:20:04 -03:00
Janne Grunau 01886255dd V4L/DVB (12685): dvb-core: check fe->ops.set_frontend return value
Various frontend driver have parameter checks in their set_frontend
functions and return an error if the parameters are not supported,
tda10021 and cx24116 to name two.

The tuning ioctls FE_SET_FRONTEND/FE_SET_PROPERTY only change values
in the property cache and return before set_frontend is called. If a
set_frontend call in software zigzag algorithm fails and the card was
previously locked it will report a lock and the new parameters but is
still tuned to the old transport. This is not detectable from
userspace.

This change checks the return values of fe->ops.set_frontend and
changes the state to the added FESTATE_ERROR for software zigzag.
No lock will be reported to userspace if the State is FESTATE_ERROR.

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:20:03 -03:00
Janne Grunau 4457ef1d61 V4L/DVB (12684): DVB: make DVB_MAX_ADAPTERS configurable
Support for more than 8 DVB devices is requested regularly so make it
a kconfig variable instead of a header define. Values in the range 4-32
are tested.

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:20:03 -03:00
Andreas Oberritter a4afd65870 V4L/DVB (12276): Remove a useless check from dvb_dmx_swfilter_packet()
Values for 'pid' range from 0 to 0x1fff. Therefore 'feed->pid' can never
be equal to both 'pid' and 0x2000. This makes the continue statement have
no effect.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:17:44 -03:00
Andreas Oberritter 1cb662a314 V4L/DVB (12275): Add two new ioctls: DMX_ADD_PID and DMX_REMOVE_PID
DMX_ADD_PID allows to add multiple PIDs to a transport stream filter
previously set up with DMX_SET_PES_FILTER and output=DMX_OUT_TSDEMUX_TAP.

DMX_REMOVE_PID is used to drop a PID from a filter.

These ioctls are to be used by readers of /dev/dvb/adapterX/demuxY. They
may be called at any time, i.e. before or after the first filter on the
shared file descriptor was started.

They make it possible to record multiple services without the need to de-
or re-multiplex TS packets.

To accomplish this, dmxdev_filter->feed.ts has been converted to a list
of struct dmxdev_feeds, each containing a PID value and a pointer to a
struct dmx_ts_feed.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:17:43 -03:00
David S. Miller aa11d958d1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	arch/microblaze/include/asm/socket.h
2009-08-12 17:44:53 -07:00
Alexey Dobriyan 405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00