Commit Graph

4645 Commits

Author SHA1 Message Date
Rafael J. Wysocki cf8116c491 Merge branches 'acpi-general', 'acpi-processor', 'acpi-lpss' and 'acpi-battery'
* acpi-general:
  ACPI: use kstrto*() instead of simple_strto*()

* acpi-processor:
  ACPI / processor replace __attribute__((packed)) by __packed

* acpi-lpss:
  ACPI / LPSS: Take I2C host controllers out of reset

* acpi-battery:
  ACPI / battery: add quirk for Acer Aspire V5-573G
  ACPI / battery: use callback for setting up quirks
2014-06-19 14:40:48 +02:00
Christoph Jaeger 3d915894f8 ACPI: use kstrto*() instead of simple_strto*()
simple_strto*() are obsolete; use kstrto*() instead. Add proper error
checking.

Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-17 14:01:56 +02:00
Alexander Mezin f43691c61d ACPI / battery: add quirk for Acer Aspire V5-573G
On Acer Aspire V5-573G battery notifications are sometimes
triggered too early. For example, when AC is unplugged and
notification is triggered, battery state is still reported as
"Full", and changes to "Discharging" only after short delay,
without any notification.

This patch solves the problem by adding 1 second sleep.
Similar quirk is already implemented in AC driver for other laptop.

Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-17 13:57:50 +02:00
Alexander Mezin 3f5dc08f56 ACPI / battery: use callback for setting up quirks
Use callback for setting up quirk instead of checking return code
of dmi_check_system(). This change will allow using bat_dmi_table
for other quirks.

Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com>
Acked-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-17 13:55:09 +02:00
Mika Westerberg 765bdd4e51 ACPI / LPSS: Take I2C host controllers out of reset
On Intel Baytrail, some I2C host controllers are held in reset when the OS
gets control. This causes the driver to fail to detect the hardware
properly.

Fix this so that we make sure that the I2C host controller is not in reset
when the driver gets probe'd.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-17 13:46:48 +02:00
Rafael J. Wysocki d715a226b0 Merge branch 'pm-sleep'
* pm-sleep:
  PM / sleep: trace events for device PM callbacks
  PM / sleep: trace events for suspend/resume
2014-06-12 13:43:08 +02:00
Rafael J. Wysocki de815a6d00 Merge branches 'acpi-general' and 'acpi-video'
* acpi-general:
  ACPI: Fix bug when ACPI reset register is implemented in system memory

* acpi-video:
  ACPI / video: Change the default for video.use_native_backlight to 1
2014-06-12 13:42:37 +02:00
Todd E Brandt bb3632c610 PM / sleep: trace events for suspend/resume
Adds trace events that give finer resolution into suspend/resume. These
events are graphed in the timelines generated by the analyze_suspend.py
script. They represent large areas of time consumed that are typical to
suspend and resume.

The event is triggered by calling the function "trace_suspend_resume"
with three arguments: a string (the name of the event to be displayed
in the timeline), an integer (case specific number, such as the power
state or cpu number), and a boolean (where true is used to denote the start
of the timeline event, and false to denote the end).

The suspend_resume trace event reproduces the data that the machine_suspend
trace event did, so the latter has been removed.

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-07 00:18:07 +02:00
Rafael J. Wysocki 751109aad5 ACPI / video: Change the default for video.use_native_backlight to 1
Now that we're hoping to have resolved all of the problems with
video.use_native_backlight=1, make that the default at last.

Link: http://marc.info/?l=linux-acpi&m=139716088401106&w=2
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-05 22:47:35 +02:00
Randy Wright a4714a898e ACPI: Fix bug when ACPI reset register is implemented in system memory
Use acpi_os_map_generic_address to pre-map the reset register if it is
memory mapped, thereby preventing the BUG_ON() in line 1319 of
mm/vmalloc.c from triggering during panic-triggered reboots.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77131
Signed-off-by: Randy Wright <rwright@hp.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
[rjw: Changelog, simplified code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-05 14:36:40 +02:00
Linus Torvalds 4dc4226f99 ACPI and power management updates for 3.16-rc1
- ACPICA update to upstream version 20140424.  That includes a
    number of fixes and improvements related to things like GPE
    handling, table loading, headers, memory mapping and unmapping,
    DSDT/SSDT overriding, and the Unload() operator.  The acpidump
    utility from upstream ACPICA is included too.  From Bob Moore,
    Lv Zheng, David Box, David Binderman, and Colin Ian King.
 
  - Fixes and cleanups related to ACPI video and backlight interfaces
    from Hans de Goede.  That includes blacklist entries for some new
    machines and using native backlight by default.
 
  - ACPI device enumeration changes to create platform devices
    rather than PNP devices for ACPI device objects with _HID by
    default.  PNP devices will still be created for the ACPI device
    object with device IDs corresponding to real PNP devices, so
    that change should not break things left and right, and we're
    expecting to see more and more ACPI-enumerated platform devices
    in the future.  From Zhang Rui and Rafael J Wysocki.
 
  - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
    it to handle system suspend/resume on Asus T100 correctly.
    From Heikki Krogerus and Rafael J Wysocki.
 
  - PM core update introducing a mechanism to allow runtime-suspended
    devices to stay suspended over system suspend/resume transitions
    if certain additional conditions related to coordination within
    device hierarchy are met.  Related PM documentation update and
    ACPI PM domain support for the new feature.  From Rafael J Wysocki.
 
  - Fixes and improvements related to the "freeze" sleep state. They
    affect several places including cpuidle, PM core, ACPI core, and
    the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.
 
  - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
    Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
 
  - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
    Aggregator Device) drivers from Baoquan He, Manuel Schölling,
    Tony Camuso, and Toshi Kani.
 
  - System suspend/resume optimization in the ACPI battery driver from
    Lan Tianyu.
 
  - OPP (Operating Performance Points) subsystem updates from
    Chander Kashyap, Mark Brown, and Nishanth Menon.
 
  - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
    Stratos Karafotis, and Viresh Kumar.
 
  - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
    s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
    Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
    Viresh Kumar.
 
  - intel_pstate driver fixes and cleanups from Dirk Brandewie,
    Doug Smythies, and Stratos Karafotis.
 
  - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
 
  - Fix for the cpuidle menu governor from Chander Kashyap.
 
  - New ARM clps711x cpuidle driver from Alexander Shiyan.
 
  - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
    Fabian Frederick, Pali Rohár, and Sebastian Capella.
 
  - Intel RAPL (Running Average Power Limit) driver updates from
    Jacob Pan.
 
  - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
 
  - devfreq core updates from Chanwoo Choi and Paul Bolle.
 
  - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
    Bartlomiej Zolnierkiewicz.
 
  - turbostat tool fix from Jean Delvare.
 
  - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
    and Thomas Renninger.
 
  - New ACPI ec_access.c tool for poking at the EC in a safe way
    from Thomas Renninger.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTjl16AAoJEILEb/54YlRxeKgP/RRQSV7lFtf582Dw/5M/iWOg
 qYeNtuYFLArEmJ7SpxHdKsU1ZRm3CahAS1j7grvQMQasUxTzoavMcSBNZefeaoNK
 d01LVNqcyKCZs3+izRezk5N1IY+AjdrOcqCdIk8rfgFnc6kOttYUrVcIzKuIKAvJ
 MsJ5s/uqP8G69FsAA3Ttdtr0HKiQhN4skSt424wntQRDeJNZPBs74mPKBGh8bxlO
 Zr/VCDibKQ2Z8jS7x+TzwZrOxgE1/9x0Cub6GAdTvAfS8A+utPwSkneUyopNqpQ+
 tJ5rz5R+HpmPMerizBuU+5s+tvjDPtH4/OZvOPSpYraQSFLOwx3hAm+a5k7fOGmc
 XWjXnXWT0i0V3iQkwrspTNjX1RgywbsHbmXrcWn192HResvMQ9zk2gH2ch6m8JhN
 yTV5V51dOZicpPuaTCvIkJpsV33p6vRz+EdPBiXoEdua5KKtOg8EnQ470dNaMR92
 3ZtWmIvSgGlyPyHlSHLfGXbPUwTYvDNV3aheIoXp9E6WY3WJN9J3WXm4EHKBNVaI
 H83kwuk1s92cgqh22H5Pcb0CmDcrbkUdP6hhsPS/aL80/EJMljRP2AYW1Y+l1LAf
 pzMLmekHFqQEDjFQltwGvFV/EjFeMHnqOgQONx9ygMaayCGGTYSDx3FbRDesf8t9
 qhoFcTPSxoo0XjrGrR6b
 =tpdF
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next

Pull ACPI and power management updates from Rafael Wysocki:
 "ACPICA is the leader this time (63 commits), followed by cpufreq (28
  commits), devfreq (15 commits), system suspend/hibernation (12
  commits), ACPI video and ACPI device enumeration (10 commits each).

  We have no major new features this time, but there are a few
  significant changes of how things work.  The most visible one will
  probably be that we are now going to create platform devices rather
  than PNP devices by default for ACPI device objects with _HID.  That
  was long overdue and will be really necessary to be able to use the
  same drivers for the same hardware blocks on ACPI and DT-based systems
  going forward.  We're not expecting fallout from this one (as usual),
  but it's something to watch nevertheless.

  The second change having a chance to be visible is that ACPI video
  will now default to using native backlight rather than the ACPI
  backlight interface which should generally help systems with broken
  Win8 BIOSes.  We're hoping that all problems with the native backlight
  handling that we had previously have been addressed and we are in a
  good enough shape to flip the default, but this change should be easy
  enough to revert if need be.

  In addition to that, the system suspend core has a new mechanism to
  allow runtime-suspended devices to stay suspended throughout system
  suspend/resume transitions if some extra conditions are met
  (generally, they are related to coordination within device hierarchy).
  However, enabling this feature requires cooperation from the bus type
  layer and for now it has only been implemented for the ACPI PM domain
  (used by ACPI-enumerated platform devices mostly today).

  Also, the acpidump utility that was previously shipped as a separate
  tool will now be provided by the upstream ACPICA along with the rest
  of ACPICA code, which will allow it to be more up to date and better
  supported, and we have one new cpuidle driver (ARM clps711x).

  The rest is improvements related to certain specific use cases,
  cleanups and fixes all over the place.

  Specifics:

   - ACPICA update to upstream version 20140424.  That includes a number
     of fixes and improvements related to things like GPE handling,
     table loading, headers, memory mapping and unmapping, DSDT/SSDT
     overriding, and the Unload() operator.  The acpidump utility from
     upstream ACPICA is included too.  From Bob Moore, Lv Zheng, David
     Box, David Binderman, and Colin Ian King.

   - Fixes and cleanups related to ACPI video and backlight interfaces
     from Hans de Goede.  That includes blacklist entries for some new
     machines and using native backlight by default.

   - ACPI device enumeration changes to create platform devices rather
     than PNP devices for ACPI device objects with _HID by default.  PNP
     devices will still be created for the ACPI device object with
     device IDs corresponding to real PNP devices, so that change should
     not break things left and right, and we're expecting to see more
     and more ACPI-enumerated platform devices in the future.  From
     Zhang Rui and Rafael J Wysocki.

   - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
     to handle system suspend/resume on Asus T100 correctly.  From
     Heikki Krogerus and Rafael J Wysocki.

   - PM core update introducing a mechanism to allow runtime-suspended
     devices to stay suspended over system suspend/resume transitions if
     certain additional conditions related to coordination within device
     hierarchy are met.  Related PM documentation update and ACPI PM
     domain support for the new feature.  From Rafael J Wysocki.

   - Fixes and improvements related to the "freeze" sleep state.  They
     affect several places including cpuidle, PM core, ACPI core, and
     the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.

   - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
     Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.

   - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
     Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
     Camuso, and Toshi Kani.

   - System suspend/resume optimization in the ACPI battery driver from
     Lan Tianyu.

   - OPP (Operating Performance Points) subsystem updates from Chander
     Kashyap, Mark Brown, and Nishanth Menon.

   - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
     Stratos Karafotis, and Viresh Kumar.

   - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
     s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
     Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
     Viresh Kumar.

   - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
     Smythies, and Stratos Karafotis.

   - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.

   - Fix for the cpuidle menu governor from Chander Kashyap.

   - New ARM clps711x cpuidle driver from Alexander Shiyan.

   - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
     Fabian Frederick, Pali Rohár, and Sebastian Capella.

   - Intel RAPL (Running Average Power Limit) driver updates from Jacob
     Pan.

   - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.

   - devfreq core updates from Chanwoo Choi and Paul Bolle.

   - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
     Bartlomiej Zolnierkiewicz.

   - turbostat tool fix from Jean Delvare.

   - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
     and Thomas Renninger.

   - New ACPI ec_access.c tool for poking at the EC in a safe way from
     Thomas Renninger"

* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
  ACPICA: Namespace: Remove _PRP method support.
  intel_pstate: Improve initial busy calculation
  intel_pstate: add sample time scaling
  intel_pstate: Correct rounding in busy calculation
  intel_pstate: Remove C0 tracking
  PM / hibernate: fixed typo in comment
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ...
2014-06-04 08:57:16 -07:00
Rafael J. Wysocki e81a0e771c Merge branch 'acpi-thermal'
* acpi-thermal:
  ACPI / thermal: Use acpi_bus_attach_private_data() to attach private data
2014-06-03 23:12:43 +02:00
Rafael J. Wysocki d9bd44933c Merge branch 'acpi-video'
* acpi-video:
  ACPI / video: Add 4 new models to the use_native_backlight DMI list
  ACPI / video: Add use native backlight quirk for the ThinkPad W530
  ACPI / video: Unregister the backlight device if a raw one shows up later
  backlight: Add backlight device (un)registration notification
  nouveau: Don't check acpi_video_backlight_support() before registering backlight
  acer-wmi: Add Aspire 5741 to video_vendor_dmi_table
  acer-wmi: Switch to acpi_video_unregister_backlight
  ACPI / video: Add an acpi_video_unregister_backlight function
  ACPI / video: Don't register acpi_video_resume notifier without backlight devices
  ACPI / video: change acpi-video brightness_switch_enabled default to 0
2014-06-03 23:12:37 +02:00
Rafael J. Wysocki 0e36d43c9c Merge branch 'acpica'
* acpica: (63 commits)
  ACPICA: Namespace: Remove _PRP method support.
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPICA: acpidump: Fix repetitive table dump in -n mode.
  ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem.
  ACPICA: Clean up redudant definitions already defined elsewhere
  ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h>
  ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h>
  ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages.
  ACPICA: Update version to 20140424.
  ACPICA: Comment/format update, no functional change.
  ACPICA: Events: Update GPE handling and initialization code.
  ACPICA: Remove extraneous error message for large number of GPEs.
  ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries.
  ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT.
  ACPICA: acpidump: Add support to force using RSDT.
  ACPICA: Back port of improvements on exception code.
  ACPICA: Back port of _PRP update.
  ACPICA: acpidump: Fix truncated RSDP signature validation.
  ACPICA: Linux header: Add support for stubbed externals.
  ...
2014-06-03 23:12:27 +02:00
Rafael J. Wysocki b04c58b1ed Merge branch 'acpi-enumeration'
* acpi-enumeration:
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
2014-06-03 23:12:20 +02:00
Rafael J. Wysocki 864e055f44 Merge branch 'acpi-lpss'
* acpi-lpss:
  ACPI / LPSS: support for fractional divider clock
  ACPI / LPSS: custom power domain for LPSS
2014-06-03 23:12:09 +02:00
Rafael J. Wysocki 2770b8b1fd Merge branch 'acpi-platform'
* acpi-platform:
  ACPI / platform / LPSS: Enable async suspend/resume of LPSS devices
  ACPI / platform: add IDs for Broadcom Bluetooth and GPS chips
2014-06-03 23:11:52 +02:00
Rafael J. Wysocki a392f7d4af Merge branch 'acpi-pm'
* acpi-pm:
  ACPI / PM: Export rest of the subsys PM callbacks
  ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend
  ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state
  ACPI / PM: Export acpi_target_system_state() to modules
2014-06-03 23:11:42 +02:00
Rafael J. Wysocki f58c41cc04 Merge branch 'acpi-battery'
* acpi-battery:
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ACPI / battery: introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL
  ACPI / battery: Accelerate battery resume callback
2014-06-03 23:11:30 +02:00
Rafael J. Wysocki 91ab377ba3 Merge branches 'acpi-tables' and 'acpi-general'
* acpi-tables:
  ACPI: Fix conflict between customized DSDT and DSDT local copy

* acpi-general:
  ACPI: Add acpi_bus_attach_private_data() to attach data to ACPI handle
2014-06-03 23:10:06 +02:00
Rafael J. Wysocki 26f8784e2d Merge branches 'acpi-processor' and 'acpi-pad'
* acpi-processor:
  ACPI / processor: Fix STARTING/DYING action in acpi_cpu_soft_notify()
  ACPI / processor: Check if LAPIC is present during initialization
  ACPI / ia64: introduce variable acpi_lapic into ia64

* acpi-pad:
  ACPI / PAD: Use time_before() for time comparison
  ACPI / PAD: call schedule() when need_resched() is true
2014-06-03 23:09:41 +02:00
Rafael J. Wysocki 4db367fd09 Merge branches 'acpi-scan', 'acpi-hotplug' and 'acpi-pci'
* acpi-scan:
  ACPI / scan: do not scan fixed hardware on HW-reduced platform

* acpi-hotplug:
  ACPI: add dynamic_debug support
  ACPI / notify: Clean up handling of hotplug events

* acpi-pci:
  ACPI / PCI: Stub out pci_acpi_crs_quirks() and make it x86 specific
2014-06-03 23:09:28 +02:00
Linus Torvalds bd698cf659 This is the bulk of pin control changes for the v3.16
development cycle:
 
 - Antoine Tenart made the get_group_pins() vtable entry
   optional.
 
 - Antoine also provides an entirely new driver for the
   Marvell Berlin SoC. This is unrelated to the existing
   MVEBU hardware driver and warrants its own separate
   driver.
 
 - Reflected from the GPIO subsystem there is a number of
   refactorings to make pin control drivers with gpiochips
   use the new gpiolib irqchip helpers. The following
   drivers were converted to use the new infrastructure:
 
   - ST Microelectronics STiH416 and friends
 
   - The Atmel AT91
 
   - The CSR SiRF (Prima2)
 
   - The Qualcomm MSM series
 
 - Massive improvements in the Qualcomm MSM driver from
   Bjorn Andersson, Andy Gross and Kumar Gala. Among those
   new support for the IPQ8064 and MSM8x74 SoC variants.
 
 - Support for the Freescale i.MX6 SoloX SoC variant.
 
 - Massive improvements in the Allwinner sunxi driver from
   Boris Brezillon, Maxime Ripard and Chen-Yu Tsai.
 
 - Renesas PFC updates from Laurent Pinchart, Kuninori
   Morimoto, Wolfram Sang and Magnus Damm.
 
 - Cleanups and refactorings of the nVidia Tegra driver from
   Stepgen Warren.
 
 - The Exynos driver now supports the Exynos3250 SoC.
 
 - Intel BayTrail updates from Jin Yao, Mika Westerberg.
 
 - The MVEBU driver now supports the Orion5x SoC
   variants, which is part of the effort of getting rid of
   the old Marvell kludges in arch/arm/mach-orion5x
 
 - Rockchip driver updates from Heiko Stuebner.
 
 - A ton of cleanups and janitorial patches from Axel Lin.
 
 - Some minor fixes and improvements here and there.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjXDAAAoJEEEQszewGV1z8zsP/i+7o5sU+rm3ZwfpCyuVih7E
 90nHTMzV2Se+8gX4D0jLZUYkxMQn9pkqG616IyT5kP5sx9co8raoAUC1Qmv6b7rI
 kIlfCaDvjPzEWgH9KZNjMP8P0rqdj8TelDRSZ0EPzHdfyUwxFmLRnFo7ywguPCG2
 SOM1uo7XhjXmphoUP7ZZWs3doflYxBAL3ZdK77QQcLEQjlNxSz/vbls6ldkKie7C
 XF7DKvGqphB8GdGKkdFvyhjQNy26rBanZRy94yU53Ak5zc0mTtmO+WEjiByAW1m7
 Fy6AVdZZhl6BLxzn9rUzsKdrWzaWzUkQNilhEO1u7OfZtNQbuYWcv7GJ7h37lIzI
 P0jegOy+7d4JxPyROphtJXx6AwV1pFFimMnWS4rHwUdjwMBVRnlOKQW/G7ulEBsn
 wD5MhD76nHySKtjYquI+iVHbmE06hG8iDUUxFm2saVG8O7Siw+E2aCXPLm9+Lp5R
 fBNuj8lnTy8/F6sHyPs8Bw6u8Ra5uSmRhV4j3B/jZG8pAksqUK6xOmjdVdE7JmoH
 qIZxuQhqrAhjmGkAg/ys5SUuMMbegxTI2f+rDy7rpWonbVOtaItMpgbYwyiQpIR4
 BDmlwZi5BNupiEW7Yzp6utWYIyYA0ntuMGpnqnPBDBCn5jZOCUTMjZXAPCDK5dEN
 Ktyu+5jCBZgpqS+KgTXl
 =wGE5
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.16 development
  cycle:

   - Antoine Tenart made the get_group_pins() vtable entry optional.

   - Antoine also provides an entirely new driver for the Marvell Berlin
     SoC.  This is unrelated to the existing MVEBU hardware driver and
     warrants its own separate driver.

   - reflected from the GPIO subsystem there is a number of refactorings
     to make pin control drivers with gpiochips use the new gpiolib
     irqchip helpers.  The following drivers were converted to use the
     new infrastructure:
       * ST Microelectronics STiH416 and friends
       * The Atmel AT91
       * The CSR SiRF (Prima2)
       * The Qualcomm MSM series

   - massive improvements in the Qualcomm MSM driver from Bjorn
     Andersson, Andy Gross and Kumar Gala.  Among those new support for
     the IPQ8064 and MSM8x74 SoC variants.

   - support for the Freescale i.MX6 SoloX SoC variant.

   - massive improvements in the Allwinner sunxi driver from Boris
     Brezillon, Maxime Ripard and Chen-Yu Tsai.

   - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
     Wolfram Sang and Magnus Damm.

   - Cleanups and refactorings of the nVidia Tegra driver from Stepgen
     Warren.

   - the Exynos driver now supports the Exynos3250 SoC.

   - Intel BayTrail updates from Jin Yao, Mika Westerberg.

   - the MVEBU driver now supports the Orion5x SoC variants, which is
     part of the effort of getting rid of the old Marvell kludges in
     arch/arm/mach-orion5x

   - Rockchip driver updates from Heiko Stuebner.

   - a ton of cleanups and janitorial patches from Axel Lin.

   - some minor fixes and improvements here and there"

* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
  pinctrl: sirf: fix a bad conflict resolution
  pinctrl: msm: Add more MSM8X74 pin definitions
  pinctrl: qcom: ipq8064: Fix naming convention
  pinctrl: msm: Add missing sdc1 and sdc3 groups
  pinctrl: sirf: switch to using allocated state container
  pinctrl: Enable "power-source" to be extracted from DT files
  pinctrl: sunxi: create irq/pin mapping during init
  pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
  pinctrl: berlin: Use devm_ioremap_resource()
  pinctrl: sirf: fix typo for GPIO bank number
  pinctrl: sunxi: depend on RESET_CONTROLLER
  pinctrl: sunxi: fix pin numbers passed to register offset helpers
  pinctrl: add pinctrl driver for imx6sx
  pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
  pinctrl: msm: switch to using generic GPIO irqchip helpers
  pinctrl: sunxi: Fix multiple registration issue
  pinctrl: sunxi: Fix recursive dependency
  pinctrl: berlin: add the BG2CD pinctrl driver
  pinctrl: berlin: add the BG2 pinctrl driver
  pinctrl: berlin: add the BG2Q pinctrl driver
  ...
2014-06-03 11:20:32 -07:00
Lv Zheng 729ddb657f ACPICA: Namespace: Remove _PRP method support.
The _PRP method is not going to be a part of the ACPI standard. This patch
removes its support code introduced by the following commits:
 1. ACPICA: Predefined names: Add support for the _PRP method.
 2. ACPICA: Update for _PRP predefined name.
 3. ACPICA: Add support for _LPD and _PRP methods.
 4. ACPICA: Back port of _PRP update.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-03 14:53:35 +02:00
Lv Zheng 4fc0a7e889 ACPI: Fix x86 regression related to early mapping size limitation
The following warning message is triggered:
 WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:136 __early_ioremap+0x11f/0x1f2()
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1-00017-g86dfc6f3-dirty #298
 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x036.091920111209 09/19/2011
  0000000000000009 ffffffff81b75c40 ffffffff817c627b 0000000000000000
  ffffffff81b75c78 ffffffff81067b5d 000000000000007b 8000000000000563
  00000000b96b20dc 0000000000000001 ffffffffff300e0c ffffffff81b75c88
 Call Trace:
  [<ffffffff817c627b>] dump_stack+0x45/0x56
  [<ffffffff81067b5d>] warn_slowpath_common+0x7d/0xa0
  [<ffffffff81067c3a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff81d4b9d5>] __early_ioremap+0x11f/0x1f2
  [<ffffffff81d4bc5b>] early_ioremap+0x13/0x15
  [<ffffffff81d2b8f3>] __acpi_map_table+0x13/0x18
  [<ffffffff817b8d1a>] acpi_os_map_memory+0x26/0x14e
  [<ffffffff813ff018>] acpi_tb_acquire_table+0x42/0x70
  [<ffffffff813ff086>] acpi_tb_validate_table+0x27/0x37
  [<ffffffff813ff0e5>] acpi_tb_verify_table+0x22/0xd8
  [<ffffffff813ff6a8>] acpi_tb_install_non_fixed_table+0x60/0x1c9
  [<ffffffff81d61024>] acpi_tb_parse_root_table+0x218/0x26a
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d610cd>] acpi_initialize_tables+0x57/0x59
  [<ffffffff81d5f25d>] acpi_table_init+0x1b/0x99
  [<ffffffff81d2bca0>] acpi_boot_table_init+0x1e/0x85
  [<ffffffff81d23043>] setup_arch+0x99d/0xcc6
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d1bbbe>] start_kernel+0x8b/0x415
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d1b5ee>] x86_64_start_reservations+0x2a/0x2c
  [<ffffffff81d1b72e>] x86_64_start_kernel+0x13e/0x14d
 ---[ end trace 11ae599a1898f4e7 ]---
when installing the following table during early stage:
 ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL  S2600CP  00004000 INTL 20100331)
The regression is caused by the size limitation of the x86 early IO mapping.

The root cause is:
 1. ACPICA doesn't split IO memory mapping and table mapping;
 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
    mechanism during early boot stage, which is more suitable for only IO
    mappings.

This patch fixes this issue by utilizing acpi_gbl_verify_table_checksum to
disable the table mapping during early stage and enabling it again for the
late stage. In this way, the normal code path is not affected. Then after
the code related to the root cause is cleaned up, the early checksum
verification can be easily re-enabled.

A new boot parameter - acpi_force_table_verification is introduced for
the platforms that require the checksum verification to stop loading bad
tables.

This fix also covers the checksum verification for the table overrides. Now
large tables can also be overridden using the initrd override mechanism.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-01 00:20:52 +02:00
Lv Zheng 47d68c7f68 ACPICA: Tables: Add mechanism to control early table checksum verification.
It is reported that Linux x86 kernel cannot map large tables. The following
large SSDT table on such platform fails to pass checksum verification and
cannot be installed:
 ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL  S2600CP  00004000 INTL 20100331)

It sounds strange that in the 64-bit virtual memory address space, we
cannot map a single ACPI table to do checksum verification. The root cause
is:
 1. ACPICA doesn't split IO memory mapping and table mapping;
 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
    mechanism during early boot stage, which is more suitable for only IO
    mappings.

ACPICA originally only mapped table header for signature validation, and
this header mapping is required by OSL override mechanism. There was no
checksum verification because we could not map the whole table using this
OSL. While the following ACPICA commit enforces checksum verification by
mapping the whole table during Linux boot stage and it finally triggers
this issue on some platforms:
 Commit: 86dfc6f339
 Subject: ACPICA: Tables: Fix table checksums verification before installation.

Before doing further cleanups for the OSL table mapping and override
implementation, this patch introduces an option for such OSPMs to
temporarily discard the checksum verification feature. It then can be
re-enabled easily when the ACPICA and the underlying OSL is ready.

This patch also deletes a comment around the limitation of mappings because
it is not correct. The limitation is not how many times we can map in the
early stage, but the OSL mapping facility may not be suitable for mapping
the ACPI tables and thus may complain us the size limitation.

The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the
work around added, it now only applies to the table descriptor that hasn't
been installed and cannot be used in other cases. Lv Zheng.

Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-01 00:18:52 +02:00
Zhang Rui 48459340b9 ACPI / scan: use platform bus type by default for _HID enumeration
Because of the growing demand for enumerating ACPI devices to
platform bus, change the code to enumerate ACPI device objects to
platform bus by default.  Namely, create platform devices for the
ACPI device objects that
 1. Have pnp.type.platform_id set (device objects with _HID currently).
 2. Do not have a scan handler attached.
 3. Are not SPI/I2C slave devices (that should be enumerated to the
    appropriate buses bus by their parent).

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog, rebase and code cleanup]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:37 +02:00
Rafael J. Wysocki d6ddaaac8f ACPI / scan: always register ACPI LPSS scan handler
Prevent platform devices from being created for ACPI LPSS devices
if CONFIG_X86_INTEL_LPSS is unset by compiling out the LPSS scan
handler's callbacks only in that case and still compiling its device
ID list in and registering the scan handler in either case.

This change is based on a prototype from Zhang Rui.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Rafael J. Wysocki cccd420859 ACPI / scan: always register memory hotplug scan handler
Prevent platform devices from being created for ACPI memory device
objects if CONFIG_ACPI_HOTPLUG_MEMORY is unset by compiling out the
memory hotplug scan handler's callbacks only in that case and still
compiling its device ID list in and registering the scan handler in
either case.

Also unset the memory hotplug scan handler's .attach() callback
if acpi_no_memhotplug is set, but still register the scan handler to
avoid creating platform devices for ACPI memory devices in that case
too.

This change is based on a prototype from Zhang Rui.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Rafael J. Wysocki a1ec657213 ACPI / scan: always register container scan handler
Prevent platform devices from being created for ACPI containers
if CONFIG_ACPI_CONTAINER is unset by compiling out the container
scan handler's callbacks only in that case and still compiling
its device ID list in and registering the scan handler in either
case.

This change is based on a prototype from Zhang Rui.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Rafael J. Wysocki d34afa9de4 ACPI / scan: Change the meaning of missing .attach() in scan handlers
Currently, some scan handlers can be compiled out entirely, which
leaves the device objects they normally attach to without a scan
handler.  This isn't a problem as long as we don't have any default
enumeration mechanism that applies to all devices without a scan
handler.  However, if such a default enumeration is added, it still
should not be applied to devices that are normally attached to by
scan handlers, because that may result in creating "physical" device
objects of a wrong type for them.

Since we are going to create platform device objects for all ACPI
device objects with pnp.type.platform_id set by default, clear
pnp.type.platform_id where there is a matching scan handler without
an .attach() callback and otherwise simply treat that scan handler
as though the .attach() callback was present but always returned 0.

This will allow us to compile out scan handler callbacks and leave
the device ID lists used by them so as to prevent creating platform
device objects for the matching ACPI devices.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Rafael J. Wysocki 549e68455c ACPI / scan: introduce platform_id device PNP type flag
Only certain types of ACPI device objects can be enumerated as
platform devices, so in order to distinguish them from the others
introduce a new ACPI device PNP type flag, platform_id, and set it
for devices with a valid _HID to start with.

This change is based on a Zhang Rui's prototype.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Zhang Rui 01cd4bac8c ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
The "serial" PNP driver supports some "unknown" PNP modems
(PNPCXXX/PNPDXXX) by matching magic strings in the PNP device name
or the PNP device card name.

ACPI enumerated PNP devices neither are PNP cards, nor have those
magic strings in device names, so this mechamism never actually works
for ACPI enumerated PNPCXXX/PNPDXXX devices.

Consequently, it is safe to remove those two IDs from the PNP ACPI scan
handler's device ID list.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Zhang Rui e1d2c4cf0b ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
The PNP ACPI scan handler device ID list includes all the IDs from
all of the struct pnp_device_id instances in the tree, but some of
them do not follow the ACPI PNP ID rule (3 letters + 4 hex digits).

For those IDs, the coressponding devices will never be enumerated
via ACPI, so it is safe to remove them from the PNP ACPI ID list.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:36 +02:00
Zhang Rui eec15edbb0 ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI can be used to enumerate PNP devices, but the code does not
handle this in the right way currently.  Namely, if an ACPI device
object
 1. Has a _CRS method,
 2. Has an identification of
    "three capital characters followed by four hex digits",
 3. Is not in the excluded IDs list,
it will be enumerated to PNP bus (that is, a PNP device object will
be create for it).  This means that, actually, the PNP bus type is
used as the default bus type for enumerating _HID devices in ACPI.

However, more and more _HID devices need to be enumerated to the
platform bus instead (that is, platform device objects need to be
created for them).  As a result, the device ID list in acpi_platform.c
is used to enforce creating platform device objects rather than PNP
device objects for matching devices.  That list has been continuously
growing recently, unfortunately, and it is pretty much guaranteed to
grow even more in the future.

To address that problem it is better to enumerate _HID devices
as platform devices by default.  To this end, change the way of
enumerating PNP devices by adding a PNP ACPI scan handler that
will use a device ID list to create PNP devices for the ACPI
device objects whose device IDs are present in that list.

The initial device ID list in the PNP ACPI scan handler contains
all of the pnp_device_id strings from all the existing PNP drivers,
so this change should be transparent to the PNP core and all of the
PNP drivers.  Still, in the future it should be possible to reduce
its size by converting PNP drivers that need not be PNP for any
technical reasons into platform drivers.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Rewrote the changelog, modified the PNP ACPI scan handler code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:35 +02:00
Rafael J. Wysocki aca0a4eb4e ACPI / scan: .match() callback for ACPI scan handlers
Introduce a .match() callback for ACPI scan handlers to allow them to
use more elaborate matching algorithms if necessary.  That is needed
for the upcoming PNP scan handler in particular.

This change is based on a Zhang Rui's prototype.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 16:04:35 +02:00
Rafael J. Wysocki 52d1d0b12b Merge branch 'acpi-lpss' into acpi-enumeration 2014-05-30 15:55:19 +02:00
Zhang Rui e0d1f09e31 ACPI / battery: wakeup the system only when necessary
ACPI Battery device receives notifications from firmware frequently,
and most of these notifications are some general events, like battery
remaining capacity change, etc, which should not wake the system up
if the system is in suspend/hibernate state.

This causes a problem that the system wakes up from suspend to freeze
shortly, because there is an ACPI battery notification every 10 seconds.

Fix the problem in this patch by registering ACPI battery device'
own wakeup source, and waking up the system only when the battery remaining
capacity is critical low, or lower than the alarm capacity set via _BTP.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=76221
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-30 13:45:25 +02:00
Zhang Rui 1ac5aaa672 ACPI / battery: introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL
ACPI battery device receives notifications when
1. the remaining battery capacity becomes critical low
2. the trip point set by the _BTP (Design capacity of Warning by default)
   is reached or crossed.

So it is able to support POWER_SUPPLY_PROP_CAPACITY_LEVEL to report
        POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
        POWER_SUPPLY_CAPACITY_LEVEL_LOW,
        POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
        POWER_SUPPLY_CAPACITY_LEVEL_FULL,
capacity levels to power supply core and user space.

Introduce support for POWER_SUPPLY_PROP_CAPACITY_LEVEL in this patch.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-30 13:45:24 +02:00
Rafael J. Wysocki f70977fbd6 Merge back earlier ACPI thermal material. 2014-05-29 13:28:14 +02:00
Lv Zheng a238317ce8 ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem.
ACPICA doesn't include protections around address space checking, Linux
build tests always complain increased sparse warnings around ACPICA
internal acpi_os_map/unmap_memory() invocations.  This patch tries to fix
this issue permanently.

There are 2 choices left for us to solve this issue:
 1. Add __iomem address space awareness into ACPICA.
 2. Remove sparse checker of __iomem from ACPICA source code.

This patch chooses solution 2, because:
 1.  Most of the acpi_os_map/unmap_memory() invocations are used for ACPICA.
     table mappings, which in fact are not IO addresses.
 2.  The only IO addresses usage is for "system memory space" mapping code in:
      drivers/acpi/acpica/exregion.c
      drivers/acpi/acpica/evrgnini.c
      drivers/acpi/acpica/exregion.c
    The mapped address is accessed in the handler of "system memory space"
    - acpi_ex_system_memory_space_handler().  This function in fact can be
    changed to invoke acpi_os_read/write_memory() so that __iomem can
    always be type-casted in the OSL layer.

According to the above investigation, we drew the following conclusion:
It is not a good idea to introduce __iomem address space awareness into
ACPICA mostly in order to protect non-IO addresses.

We can simply remove __iomem for acpi_os_map/unmap_memory() to remove
__iomem checker for ACPICA code. Then we need to enforce external usages
to invoke other APIs that are aware of __iomem address space.
The external usages are:
 drivers/acpi/apei/einj.c
 drivers/acpi/acpi_extlog.c
 drivers/char/tpm/tpm_acpi.c
 drivers/acpi/nvs.c

This patch thus performs cleanups in this way:
 1. Add acpi_os_map/unmap_iomem() to be invoked by non-ACPICA code.
 2. Remove __iomem from acpi_os_map/unmap_memory().

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 18:13:08 +02:00
Manuel Schölling 4ff248f3bf ACPI / PAD: Use time_before() for time comparison
To be future-proof and for better readability the time comparisons are
modified to use time_before() instead of plain, error-prone math.

Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:38:23 +02:00
Hans de Goede 0dc6b96ac2 ACPI / video: Add 4 new models to the use_native_backlight DMI list
Acer Aspire V5-171
References: https://bugzilla.redhat.com/show_bug.cgi?id=983342

Acer Aspire V5-471G
Lenovo Yoga 2 11
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>

HP EliteBook 8470p
References: https://bugzilla.redhat.com/show_bug.cgi?id=1093120

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:31:33 +02:00
Hans de Goede 1e815db647 ACPI / video: Add use native backlight quirk for the ThinkPad W530
Like all of the other *30 ThinkPad models, the W530 has a broken acpi-video
backlight control. Note in order for this to actually fix things on the
ThinkPad W530 the commit titled:
"nouveau: Don't check acpi_video_backlight_support() before registering backlight"
is also needed.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1093171
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:29:01 +02:00
Hans de Goede 53a92ba7e3 ACPI / video: Unregister the backlight device if a raw one shows up later
When video.use_native_backlight=1 and non intel gfx are in use, the raw
backlight device of the gfx driver will show up after acpi-video has done its
acpi_video_verify_backlight_support() check.

This causes video.use_native_backlight=1 to not have the desired result.

This patch fixes this by adding a backlight notifier and when a raw
backlight is registered or unregistered re-doing the
acpi_video_verify_backlight_support() check.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:29:01 +02:00
Lan Tianyu e6f8a4d60b ACPI / thermal: Use acpi_bus_attach_private_data() to attach private data
Use acpi_bus_attach_private_data() to attach private data
instead of acpi_attach_data().

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:21:44 +02:00
Lan Tianyu 72013795a7 ACPI: Add acpi_bus_attach_private_data() to attach data to ACPI handle
There is already acpi_bus_get_private_data() to get ACPI handle data
which is associated with acpi_bus_private_data_handler(). This patch
is to add acpi_bus_attach_private_data() to make a pair and facilitate
to attach and get data to/from ACPI handle.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:19:54 +02:00
Bjørn Mork 45fef5b88d ACPI: add dynamic_debug support
Commit 1a699476e2 ("ACPI / hotplug / PCI: Hotplug notifications
from acpi_bus_notify()") added debug messages for a few common
events. These debug messages are unconditionally enabled if
CONFIG_DYNAMIC_DEBUG is defined, contrary to the documented
meaning, making the ACPI system spew lots of unwanted noise on
any kernel with dynamic debugging.

The bug was introduced by commit fbfddae696 ("ACPI: Add
acpi_handle_<level>() interfaces"), which added the
CONFIG_DYNAMIC_DEBUG dependency without respecting its meaning.

Fix by adding real support for dynamic_debug.

Fixes: fbfddae696 ("ACPI: Add acpi_handle_<level>() interfaces")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-26 14:38:57 +02:00
Aaron Lu 2807bd18cc ACPI / thermal: fix workqueue destroy order
When the thermal module is to be removed, we should destroy the wq
acpi_thermal_pm_queue after the ACPI driver's remove callback is
executed as we will need to flush the workqueue there, or a NULL pointer
access will be hit.

Reported-and-tested-by: Kui Zhang <kuizhang@gmail.com>
References: http://www.spinics.net/lists/kernel/msg1747251.html
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-26 14:34:07 +02:00
Rafael J. Wysocki 3022f4de49 Merge branch 'acpi-platform' into acpi-lpss 2014-05-25 14:41:02 +02:00