Commit Graph

72159 Commits

Author SHA1 Message Date
Arnd Bergmann 15b5eb2d91 ARM: s3c24xx: enable CONFIG_BUG for tct_hammer
Disabling CONFIG_BUG creates an insane amount of build warnings, which
makes it useless to check for building defconfigs to see if new
warnings show up.

Without this patch, building tct_hammer_defconfig results in:

net/packet/af_packet.c: In function 'tpacket_rcv':
net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized]
net/core/ethtool.c: In function 'ethtool_get_feature_mask':
net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type]
block/cfq-iosched.c: In function 'cfq_async_queue_prio':
block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type]
mm/bootmem.c: In function 'mark_bootmem':
mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type]
net/core/dev.c: In function 'skb_warn_bad_offload':
net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable]
drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup':
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
(and many more)

The size of vmlinux increases by 1.78% because of this:

size obj-arm/vmlinux.nobug
   text    data     bss     dec     hex filename
   2108474  116916   55352 2280742  22cd26 obj-arm/vmlinux
size obj-arm/vmlinux.bug
   text    data     bss     dec     hex filename
   2150804  116916   53696 2321416  236c08 obj-arm/vmlinux

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
2012-08-10 13:02:06 +02:00
Arnd Bergmann b64456a4fc Merge branch 'testing/new-warnings' into fixes
These patches all fix bugs that were newly introduced in v3.6-rc1
and found because they cause a gcc warning with one of the ARM
defconfigs. Most of them are harmless, but since we're trying
to get rid of all warnings eventually, we can start with the ones
that were not there before.

* testing/new-warnings:
  omap-rng: fix use of SIMPLE_DEV_PM_OPS
  spi/s3c64xx: improve error handling
  mtd/omap2: fix dmaengine_slave_config error handling
  gpio: em: do not discard em_gio_irq_domain_cleanup
  ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
  usb/ohci-omap: remove unused variable
  mfd/asic3: fix asic3_mfd_probe return value

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-10 12:28:57 +02:00
Arnd Bergmann 8ab08c0c4c ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
exynos_pm_add_dev_to_genpd is used if one or more out of a large
number of Kconfig symbols are enabled. However the new
exynos_defconfig selects none of those, so the function becomes
unused. Marking it so lets the compiler automatically discard
it.

Without this patch, building exynos_defconfig results in:

arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-10 12:27:34 +02:00
Arnd Bergmann a33493775d ARM: imx: gpmi-nand depends on mxs-dma
It is not currently possible to build the gpmi-nand driver without
also building the mxs-dma driver. Clarify this Kconfig and enable
both in the defconfig file so we can build it again with both enabled.

drivers/built-in.o: In function `gpmi_dma_filter':
clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
2012-08-09 15:16:44 +02:00
Arnd Bergmann b434f5c95d ARM: integrator: include <linux/export.h>
Without this patch, building integrator_defconfig results in:

arch/arm/mach-integrator/core.c:150:1: warning: data definition has no type or storage class [enabled by default]
arch/arm/mach-integrator/core.c:150:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
arch/arm/mach-integrator/core.c:150:1: warning: parameter names (without types) in function declaration [enabled by default]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
2012-08-09 15:16:44 +02:00
Arnd Bergmann 35e7906145 ARM: s3c24xx: use new PWM driver
The samsung PWM driver has moved to the new PWM subsystem, which
changed the Kconfig symbol for that driver, but the rx1950 and
gta02 boards still uses the old one.

Without this patch, building s3c2410_defconfig results in:

arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_lcd_power':
arch/arm/mach-s3c24xx/mach-rx1950.c:430: undefined reference to `pwm_config'
arch/arm/mach-s3c24xx/mach-rx1950.c:431: undefined reference to `pwm_disable'
arch/arm/mach-s3c24xx/mach-rx1950.c:437: undefined reference to `pwm_config'
arch/arm/mach-s3c24xx/mach-rx1950.c:438: undefined reference to `pwm_enable'
arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_exit':
arch/arm/mach-s3c24xx/mach-rx1950.c:504: undefined reference to `pwm_free'
arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_init':
arch/arm/mach-s3c24xx/mach-rx1950.c:487: undefined reference to `pwm_request'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
2012-08-09 15:16:43 +02:00
Arnd Bergmann 9c97738c5d ARM: sa1100: include linux/io.h in hackkit leds code
The sa1100 definition of the io_p2v macro has changed in v3.6, and this one
file stopped working because of that.

Without this patch, building hackkit_defconfig results in:

arch/arm/mach-sa1100/leds-hackkit.c: In function 'hackkit_leds_event':
arch/arm/mach-sa1100/leds-hackkit.c:39:4: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
2012-08-09 15:16:42 +02:00
Arnd Bergmann 4eef6cbfcc Input: eeti_ts: pass gpio value instead of IRQ
The EETI touchscreen asserts its IRQ line as soon as it has data in its
internal buffers. The line is automatically deasserted once all data has
been read via I2C. Hence, the driver has to monitor the GPIO line and
cannot simply rely on the interrupt handler reception.

In the current implementation of the driver, irq_to_gpio() is used to
determine the GPIO number from the i2c_client's IRQ value.

As irq_to_gpio() is not available on all platforms, this patch changes
this and makes the driver ignore the passed in IRQ. Instead, a GPIO is
added to the platform_data struct and gpio_to_irq is used to derive the
IRQ from that GPIO. If this fails, bail out. The driver is only able to
work in environments where the touchscreen GPIO can be mapped to an
IRQ.

Without this patch, building raumfeld_defconfig results in:

drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org (v3.2+)
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: linux-input@vger.kernel.org
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-09 15:16:41 +02:00
Stephen Warren 798bd59ce9 ARM: tegra: more regulator fixes for Harmony
Commit 3d55c29 "ARM: tegra: harmony: add regulator supply name and its
input supply" was supposed to fix all the problems with regulators on
Harmony. However, it appears that I only tested it when booting using
board files, not when booting using device tree. This change fixes two
problems with regulators when booting using device tree:

1) That patch only created the vdd_sys regulator when booting using a
   board file. Since this is the root of the whole regulator tree, this
   caused no regulators to successfully initialize when booting using
   device tree. The registration of vdd_sys is moved to fix this.

2) When booting use DT, the regulator core sets has_full_constraints,
   which in turn causes the core to turn off any regulators not marked
   as always on. Some of the affected regulators are required for basic
   system operation. To solve this, add always on constraints to all
   relevant regulators. This doesn't affect booting using a board file
   since nothing sets has_full_constraints in that case.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-09 15:16:40 +02:00
Aaro Koskinen d9e0d149b5 ARM: dma-mapping: fix incorrect freeing of atomic allocations
Commit e9da6e9905 (ARM: dma-mapping:
remove custom consistent dma region) changed the way atomic allocations
are handled. However, arm_dma_free() was not modified accordingly, and
as a result freeing of atomic allocations does not work correctly when
CMA is disabled. Memory is leaked and following WARNINGs are seen:

[   57.698911] ------------[ cut here ]------------
[   57.753518] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4()
[   57.811473] trying to free invalid coherent area: e0848000
[   57.867398] Modules linked in: sata_mv(-)
[   57.921373] [<c000d270>] (unwind_backtrace+0x0/0xf0) from [<c0015430>] (warn_slowpath_common+0x50/0x68)
[   58.033924] [<c0015430>] (warn_slowpath_common+0x50/0x68) from [<c00154dc>] (warn_slowpath_fmt+0x30/0x40)
[   58.152024] [<c00154dc>] (warn_slowpath_fmt+0x30/0x40) from [<c000dc18>] (arm_dma_free+0x88/0xe4)
[   58.219592] [<c000dc18>] (arm_dma_free+0x88/0xe4) from [<c008fa30>] (dma_pool_destroy+0x100/0x148)
[   58.345526] [<c008fa30>] (dma_pool_destroy+0x100/0x148) from [<c019a64c>] (release_nodes+0x144/0x218)
[   58.475782] [<c019a64c>] (release_nodes+0x144/0x218) from [<c0197e10>] (__device_release_driver+0x60/0xb8)
[   58.614260] [<c0197e10>] (__device_release_driver+0x60/0xb8) from [<c0198608>] (driver_detach+0xd8/0xec)
[   58.756527] [<c0198608>] (driver_detach+0xd8/0xec) from [<c0197c54>] (bus_remove_driver+0x7c/0xc4)
[   58.901648] [<c0197c54>] (bus_remove_driver+0x7c/0xc4) from [<c004bfac>] (sys_delete_module+0x19c/0x220)
[   59.051447] [<c004bfac>] (sys_delete_module+0x19c/0x220) from [<c0009140>] (ret_fast_syscall+0x0/0x2c)
[   59.207996] ---[ end trace 0745420412c0325a ]---
[   59.287110] ------------[ cut here ]------------
[   59.366324] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4()
[   59.450511] trying to free invalid coherent area: e0847000
[   59.534357] Modules linked in: sata_mv(-)
[   59.616785] [<c000d270>] (unwind_backtrace+0x0/0xf0) from [<c0015430>] (warn_slowpath_common+0x50/0x68)
[   59.790030] [<c0015430>] (warn_slowpath_common+0x50/0x68) from [<c00154dc>] (warn_slowpath_fmt+0x30/0x40)
[   59.972322] [<c00154dc>] (warn_slowpath_fmt+0x30/0x40) from [<c000dc18>] (arm_dma_free+0x88/0xe4)
[   60.070701] [<c000dc18>] (arm_dma_free+0x88/0xe4) from [<c008fa30>] (dma_pool_destroy+0x100/0x148)
[   60.256817] [<c008fa30>] (dma_pool_destroy+0x100/0x148) from [<c019a64c>] (release_nodes+0x144/0x218)
[   60.445201] [<c019a64c>] (release_nodes+0x144/0x218) from [<c0197e10>] (__device_release_driver+0x60/0xb8)
[   60.634148] [<c0197e10>] (__device_release_driver+0x60/0xb8) from [<c0198608>] (driver_detach+0xd8/0xec)
[   60.823623] [<c0198608>] (driver_detach+0xd8/0xec) from [<c0197c54>] (bus_remove_driver+0x7c/0xc4)
[   61.013268] [<c0197c54>] (bus_remove_driver+0x7c/0xc4) from [<c004bfac>] (sys_delete_module+0x19c/0x220)
[   61.203472] [<c004bfac>] (sys_delete_module+0x19c/0x220) from [<c0009140>] (ret_fast_syscall+0x0/0x2c)
[   61.393390] ---[ end trace 0745420412c0325b ]---

The patch fixes this.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-09 07:46:07 +02:00
Aaro Koskinen e4ea6918c9 ARM: dma-mapping: fix atomic allocation alignment
The alignment mask is calculated incorrectly. Fixing the calculation
makes strange hangs/lockups disappear during the boot with Amstrad E3
and 3.6-rc1 kernel.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-09 07:46:07 +02:00
Chris Brand 39f78e7056 ARM: mm: fix MMU mapping of CMA regions
Fix dma_contiguous_remap() so that it continues through all the
regions, even after encountering one that is outside lowmem.
Without this change, if you have two CMA regions, the first outside
lowmem and the seocnd inside lowmem, only the second one will get
set up in the MMU. Data written to that region then doesn't get
automatically flushed from the cache into memory.

Signed-off-by: Chris Brand <cbrand@broadcom.com>
[extended patch subject with 'fix' word]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-08-09 07:46:07 +02:00
Paul Mundt fa75ce649e Merge branches 'sh/urgent' and 'sh/gpiolib' into sh-latest 2012-08-09 13:21:13 +09:00
Phil Edworthy d0b464d670 sh: sh7269: Fix LCD pinmux
There are two ports that can output the LCD data, therefore
they have to use separate pimux identifiers so we can select
the one we want to use.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-09 13:16:55 +09:00
Mike Frysinger 800fb3ddee sh: dma: fix request_irq usage
When calling request_irq with IRQF_SHARED, the dev cookie must be set
(i.e. non-NULL), otherwise the code rejects it immediately with -EINVAL.
So restore the logic here where we'd pass a pointer to the name as a
dummy unique val.

Otherwise, booting up on my LANDISK system would fail with:
	DMAC Address Error0 request_irq fail

This was introduced in commit 7f47c7189b.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-09 13:11:11 +09:00
Suresh Siddha c6fd893da9 x86, avx: don't use avx instructions with "noxsave" boot param
Clear AVX, AVX2 features along with clearing XSAVE feature bits,
as part of the parsing "noxsave" parameter.

Fixes the kernel boot panic with "noxsave" boot parameter.

We could have checked cpu_has_osxsave along with cpu_has_avx etc, but Peter
mentioned clearing the feature bits will be better for uses like
static_cpu_has() etc.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1343755754.2041.2.camel@sbsiddha-desk.sc.intel.com
Cc: <stable@vger.kernel.org>	# v3.5
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-08-08 13:41:42 -07:00
Heiko Carstens e858712185 s390/compat: fix mmap compat system calls
The native 31 bit and the compat behaviour for the mmap system calls differ:

In native 31 bit mode the passed in address for the mmap system call will be
unmodified passed to sys_mmap_pgoff().
In compat mode however the passed in address will be modified with
compat_ptr() which masks out the most significant bit.

The result is that in native 31 bit mode each mmap request (with MAP_FIXED)
will fail where the most significat bit is set, while in compat mode it
may succeed.

This odd behaviour was introduced with d3815898 "[S390] mmap: add missing
compat_ptr conversion to both mmap compat syscalls".

To restore a consistent behaviour accross native and compat mode this
patch functionally reverts the above mentioned commit.

Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08 07:32:57 -07:00
Heiko Carstens 82aabdb6f1 s390/compat: fix compat wrappers for process_vm system calls
The compat wrappers incorrectly called the non compat versions of
the system process_vm system calls.

Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08 07:32:57 -07:00
Jiri Kosina 5ab37e1b22 s390: do not clobber personality flags in sys_32_personality()
There are multiple errors in how sys_32_personality() handles personality
flags stored in top three bytes.

- directly comparing current->personality against PER_LINUX32 doesn't work
  in cases when any of the personality flags stored in the top three bytes
  are used.
- directly forcefully setting personality to PER_LINUX32 or PER_LINUX
  discards any flags stored in the top three bytes

Fix the first one by properly using personality() macro to compare only
PER_MASK bytes.
Fix the second one by setting only the bits that should be set, instead of
overwriting the whole value.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08 07:32:56 -07:00
Heiko Carstens c63cb468f3 s390/seccomp: add support for system call filtering using BPF
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08 07:32:56 -07:00
Heiko Carstens d050351381 s390/mm: remove MAX_PHYSADDR_BITS define
It's unused, so remove it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08 07:32:55 -07:00
Arnd Bergmann 376249cf57 ARM i.MX fixes for 3.6-rc
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQIMB0AAoJEPFlmONMx+ez1K0P/AsYjNl11yVlcTrSB7SBlOTU
 1wluzsTMuKUNJU7PHSzMyJaRbOvGyVJZ4QOB4EjBDuQZ79M4afuzzxAl7i/KpAhz
 s1ut2c+KuM6IlYXlfFzwfcIJWHY9S+x1Ck2sOtmeDjeJzncaZyCi8Na/0hdkBsjF
 vIGEdLG25uXeVwsrPpt89vip6myEZUlUONizhny8ZvYdoJojsjPrLR9zvCpRrUg3
 eFOrrcAdJ/QhemFCiLITrpnqslV6oXpr6aE/NuTA6mRIXmimWRXUED1Q/NlU+wcR
 gp3i0xfh9LoRu4nNOOUgiFAixwINQ7vMYbvbNWSY0LIw1VUCRKxcyfAxdygUen9Y
 SH72KTAqWugJtuOQJlDeRzVKUttno+Ew3MqmqyNE6bR8RElGBpATQOatWGAfZbvC
 ZYco5qLuuiAA3rvOa6lzy47W8c7+dKqxOPC0uQen3G6KOPT1YylzOqSirShmexTb
 5hyAt1n38SAPpDPob6b7CUHWML+AN/2B6Xf6bdRWJ+1RS7E/YnmnoqWJv5kYJwNB
 b7nIy9E8eoFy/f1FecZ41QbqauDIKLZTonigNTeCMzg3q6ztyx4jfcus36tKP/Qi
 sEvaKS4zo+a7v+taKZw6eJ4xZRfZ6LwTz0LupdoW5JuU7qReaxf3ajX56Y9OJPT7
 +CypVsgShL4TufpBka9U
 =v/QZ
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

ARM i.MX fixes for 3.6-rc

* tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6:
  i.MX27: Fix emma-prp and csi clocks.
  ARM: clk-imx31: Fix the keypad clock name
  ARM: dts: imx27-3ds.dts: Fix serial console node
2012-08-07 11:22:14 +02:00
Sebastian Hesselbarth 3b6c944087 ARM: kirkwood: fix typo in Makefile.boot
Just a small typo fix to make lsxl dtbs compile

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-07 10:48:11 +02:00
Javier Martin 9de76b6df7 i.MX27: Fix emma-prp and csi clocks.
Naming of emma-prp related clocks for the i.MX27 is not correct.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-07 09:14:30 +02:00
Shawn Guo 5230f8fe9a ARM: dts: imx: add alias for gpio
Add alias for gpio nodes, so that gpio driver can identify the port
number and then specify a sensible gpio base rather than using the
one dynamically allocated by gpio core.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-07 08:55:51 +02:00
Linus Walleij 8bb8148c78 ARM: integrator: use clk_prepare_enable() for timer
The Integrator timer is using the clock framework to get the
timer frequency, but missed to prepare the clock before enabling.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-06 19:55:32 +02:00
Arnd Bergmann 1b984fbe0f Merge branch 'mxs/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
* 'mxs/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: always build ocotp
  ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig
  ARM: mx28: Fix registers range
  ARM: mx23: Fix registers range
2012-08-06 19:53:48 +02:00
Marc Kleine-Budde 6eec0152c4 ARM: mxs: always build ocotp
With this patch ocotp support will always be build into the kernel on mxs.
Otherwise a DT-only kernel fails to link with:

arch/arm/mach-mxs/mach-mxs.c:169: undefined reference to `mxs_get_ocotp'

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-04 22:52:23 +08:00
Marek Vasut 3bed491c8d ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig
The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig,
this caused severe breakage of userland applications since the upper
limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is
set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr
if needed.

Quoting Russell King [1]:

"4096 is also fine for ARM too. There's not much point in having
defconfigs change it - that would just be pure noise in the config
files."

the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig
altogether.

This problem was introduced by commit cde7c41 (ARM: configs: add
defconfig for mach-mxs).

[1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-04 22:22:18 +08:00
Linus Torvalds d8579fd834 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI and power management fixes from Len Brown:
 "A 3.3 sleep regression fixed, numa bugfix, plus some minor cleanups"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  ACPI processor: Fix tick_broadcast_mask online/offline regression
  ACPI: Only count valid srat memory structures
  ACPI: Untangle a return statement for better readability
  ACPI / PCI: Do not try to acquire _OSC control if that is hopeless
  ACPI: delete _GTS/_BFS support
  ACPI/x86: revert 'x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler'
  ACPI: replace strlen("string") with sizeof("string") -1
  ACPI / PM: Fix build warning in sleep.c for CONFIG_ACPI_SLEEP unset
2012-08-03 14:10:00 -07:00
Linus Torvalds d79095eee2 Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM bug fixes from Marcelo Tosatti:
 - Fix DS/ES segment register corruption on x86_32.
 - Fix kvmclock wallclock migration offset.
 - Fix PIT interrupt ACK vs system reset logic bug.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: Fix ds/es corruption on i386 with preemption
  KVM: x86: apply kvmclock offset to guest wall clock time
  KVM: PIC: call ack notifiers for irqs that are dropped form irr
2012-08-03 11:21:29 -07:00
Linus Torvalds 1ca0049f2c Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "Various fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, kcmp: The kcmp system call can be common
  arch/x86/kernel/kdebugfs.c: Ensure a consistent return value in error case
  x86/mce: Add quirk for instruction recovery on Sandy Bridge processors
  x86/mce: Move MCACOD defines from mce-severity.c to <asm/mce.h>
  x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs
  x86, nops: Missing break resulting in incorrect selection on Intel
  x86: CONFIG_CC_STACKPROTECTOR=y is no longer experimental
2012-08-03 10:59:36 -07:00
Linus Torvalds bd463a0606 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Fix merge window fallout and fix sleep profiling (this was always
  broken, so it's not a fix for the merge window - we can skip this one
  from the head of the tree)."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/trace: Add ability to set a target task for events
  perf/x86: Fix USER/KERNEL tagging of samples properly
  perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit
2012-08-03 10:57:20 -07:00
Linus Torvalds 587a9e1f95 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
  m68k/apollo: Rename "timer" to "apollo_timer"
  zorro: Remove unused zorro_bus.devices
  m68k: Remove never used asm/shm.h
  m68k/sun3: Remove unselectable code in prom_init()
  m68k: Use asm-generic version of <asm/sections.h>
  m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}
  mtd/uclinux: Use generic __bss_stop instead of _ebss
  m68knommu: Allow ColdFire CPUs to use unaligned accesses
  m68k: Remove five unused headers
  m68k: CPU32 does not support unaligned accesses
  m68k: Introduce config option CPU_HAS_NO_UNALIGNED
  m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64
  m68k: Move CPU_HAS_* config options
  m68k: Remove duplicate FPU config option
  m68knommu: Clean up printing of sections
  m68k: Use asm-generic version of <asm/types.h>
  m68k: Use Kbuild logic to import asm-generic headers
2012-08-03 10:52:41 -07:00
Shawn Guo 65dee07c99 ARM: dts: imx: fix gpio interrupts property
Commit 88cde8b (ARM: dts: imx: update #interrupt-cells for gpio nodes)
changes gpio #interrupt-cells from 1 to 2 without updating the users.
It causes the gpio irq requesting call failing in client driver's probe
function.

Add the irq type cell for those gpio interrupt users to fix their
driver probe failure.

Reported-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-03 22:36:18 +08:00
Shawn Guo 1eec0c5695 ARM: dts: imx53-ard: add regulators for lan9220
Since commit c7e963f (net/smsc911x: Add regulator support), the lan9220
device tree probe fails on imx53-ard board, because the commit makes
VDD33A and VDDVARIO supplies mandatory for the driver.

Add a fixed dummy 3V3 supplying lan9220 to fix the regression.

Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-03 22:36:17 +08:00
Shawn Guo 68b0562df9 ARM: imx: enable emi_slow_gate clock for imx5
The imx5 common clock migration causes a regression with smsc911x
driver on imx53-ard board, where a smsc lan9220 controller gets
connected on imx53 with EIM interface.  EIM needs clock emi_slow_gate
to be functional.  In the new imx5 clock driver, there is no use count
incremented for the clock by enabling it, so the framework closes the
clock at late init time and makes EIM stop working then.

Enable emi_slow_gate in clock driver initialization to fix the
regression.

Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-03 22:36:00 +08:00
Fabio Estevam 8cc7a2b9f7 ARM: clk-imx31: Fix the keypad clock name
Fix the keypad clock name, in order to fix the following error:

imx-keypad imx-keypad: failed to get keypad clock
imx-keypad: probe of imx-keypad failed with error -2

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: stable@vger.kernel.org
2012-08-03 16:28:47 +02:00
Fabio Estevam 0f06cde734 ARM: mx28: Fix registers range
Fix registers range.

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-03 19:58:16 +08:00
Fabio Estevam 640bf0607c ARM: mx23: Fix registers range
Fix registers range.

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-03 19:58:16 +08:00
Fabio Estevam 97a7dab423 ARM: imx6q-sabrelite: Setup CLKO IOMUX
In order to have audio functional on mx6qsabrelite, it is necessary
to setup the IOMUX for MX6Q_PAD_GPIO_0__CCM_CLKO pins as it provides
the audio clock.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-03 19:57:35 +08:00
Len Brown 9d0b01a1bb Merge branches 'delete-gts-bfs', 'misc', 'novell-bugzilla-757888-numa' and 'osc-pcie' into base 2012-08-03 00:31:23 -04:00
Thomas Renninger 095adbb644 ACPI: Only count valid srat memory structures
Otherwise you could run into:
WARN_ON in numa_register_memblks(), because node_possible_map is zero

References: https://bugzilla.novell.com/show_bug.cgi?id=757888

On this machine (ProLiant ML570 G3) the SRAT table contains:
  - No processor affinities
  - One memory affinity structure (which is set disabled)

CC: Per Jessen <per@opensuse.org>
CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-08-03 00:15:53 -04:00
Andreas Schwab 9e2760d18b m68k: Make sys_atomic_cmpxchg_32 work on classic m68k
User space access must always go through uaccess accessors, since on
classic m68k user space and kernel space are completely separate.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2012-08-03 00:48:24 +02:00
Linus Torvalds fc6bdb59a5 Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc
Pull OLPC platform updates from Andres Salomon:
 "These move the OLPC Embedded Controller driver out of
  arch/x86/platform and into drivers/platform/olpc.

  OLPC machines are now ARM-based (which means lots of x86 and ARM
  changes), but are typically pretty self-contained..  so it makes more
  sense to go through a separate OLPC tree after getting the appropriate
  review/ACKs."

* 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc:
  x86: OLPC: move s/r-related EC cmds to EC driver
  Platform: OLPC: move global variables into priv struct
  Platform: OLPC: move debugfs support from x86 EC driver
  x86: OLPC: switch over to using new EC driver on x86
  Platform: OLPC: add a suspended flag to the EC driver
  Platform: OLPC: turn EC driver into a platform_driver
  Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it
  drivers: OLPC: update various drivers to include olpc-ec.h
  Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
2012-08-02 11:52:39 -07:00
Linus Torvalds 44d82e2963 ARM: arm-soc Marvell Orion device-tree updates
This branch contains a set of device-tree conversions for Marvell Orion
 platforms that were staged early but took a few tries to get the branch
 into a format where it was suitable for us to pick up.
 
 Given that most people working on these platforms are hobbyists with
 limited time, we were a bit more flexible with merging it even though
 it came in late.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQGrp8AAoJEIwa5zzehBx3Ou8P/3HA53sS2WotNsBjpGTPuJim
 TppOmfFU6e7TLaY2oOWjIb5tPxK96u4vvCnQFAv+9TF+ewW0yCQlkBIJga3uVE7+
 tlz5TbKBo+vQYrFgFCpEwwTHYuLgjpIK4wDs+09EkIM4cMqe6RnLK1KGo6vCAqO9
 CKE0rqEfUFjdUq2jed7HA39iwNqJrz8VGLviozvTjW2R42x9iGuy5m2DpThYrLzr
 7IYwKGMaJIatG1C/pai7KLEjdJgQl9PeDsgG0oyYY2HHeNy3o8m7tLOL3tnWXeyj
 XaniNs/YZBp4nADf2sCzXxEVjqRBPVyiw8qCHEOW5L1cfUTq//1QDI3I4kcQzffg
 VsfLPNvzFsPEMlLI1Xo5UX/8w3xQhBeoI8PtlX7coBMBLn5rJXGnjGpEnH+5SsSA
 8KXxm4hP2aOGF+injoEv5HCEiUngH4YPN4hgXwyYdJKcln2YHy8xoIVabsmx27+v
 bSfododiEvHsBNxfz0Nn5Vo5O3trubU3qe4FEBAhS3pU3GksBocokAqtxeR+BBbH
 RfBVJ09QEYx1N+c6bhGQXt7F+8sUYO0s9tA7BEkeJtiXp8OX6M8eE4mFoMpIJbsC
 SmyxsVEE9pna9x3TSy42jiGO3yxbuKEoAy2HfyU1R8yq84XBFXbkgwV02tQcgClz
 vH4VgGdQoGULqa83GImG
 =xb8w
 -----END PGP SIGNATURE-----

Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
 "This contains a set of device-tree conversions for Marvell Orion
  platforms that were staged early but took a few tries to get the
  branch into a format where it was suitable for us to pick up.

  Given that most people working on these platforms are hobbyists with
  limited time, we were a bit more flexible with merging it even though
  it came in late."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

Conflicts:
	drivers/watchdog/orion_wdt.c
2012-08-02 11:50:24 -07:00
Linus Torvalds bfdf85dfce ARM: arm-soc: cpuidle enablement for OMAP
Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree, but
 didn't go in because the pull request ended up rejected. So it just got
 merged, and we got this staged branch that enables the coupled cpuidle
 code on OMAP.
 
 With a stable git workflow from the other maintainer we could have staged
 this earlier, but that wasn't the case so we have had to merge it late.
 
 The alternative is to hold it off until 3.7 but given that the code is
 well-isolated to OMAP and they are eager to see it go in, I didn't push
 back hard in that direction.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQGrdLAAoJEIwa5zzehBx36jwP/jP7olzWRo4AfNB8urXpEmVF
 WLh0OrdM4PSvLaIZxpLPuJZC8WP2U4mU5WvlGKtOaqr5iau8ErKfUQ3XVqNvfEKW
 2FeslUxQLiMtic88Ys3OMnneFPV5pp0QdH/LgiivFj7ZeUAkAV/FQj9U2CA1KXER
 k+2uC1b8Kd27FSQjbwKx/0oO4IfNUhOItifKajDUnrDlkET92eeR45+WF94cepwo
 vBN0SpE8nfrLvbELkY2FN/xxk/7eADr8qbM6KNI98yn41b4577aZO7xQ3/8r+PUr
 0vyW9QRVgkLLVV/HNfEKcEPo8VNH3xNQ6bb0DcqV7hZxqCcXz3YPGPLTnWb6/RxC
 vp26/VKiRPikQF9XGUT55k/vuAQQH1vzzlQTH0YKZ8fooWA1zvMgXdpyMZdjqfYm
 ZVft2x4P1uHBAbtG841KJO11SXHavsXxCNlezsddvgs+dfeE2etclmkVtZ0dCUMZ
 CIMNy2JMOUjv+Ky55YB4qYUdCoOQDZSEGe59AnS2IRpvRVTAnYblMcoY/Fug0lPe
 JI6XkCrk7nYCMXK2NSQjgteZZ9anJ2IzU1Q7d7ev+k7oUcMGRiWPVWJBS49WPIqu
 SFX5M10cSOaahxe1qqNl+qn3e4K2O6ImCxXlCidFQdXh13zojovokIqc+GDnbYi/
 mrix0RssEKdaGFbiYObK
 =Wp41
 -----END PGP SIGNATURE-----

Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc cpuidle enablement for OMAP from Olof Johansson:
 "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree,
  but didn't go in because the pull request ended up rejected.  So it
  just got merged, and we got this staged branch that enables the
  coupled cpuidle code on OMAP.

  With a stable git workflow from the other maintainer we could have
  staged this earlier, but that wasn't the case so we have had to merge
  it late.

  The alternative is to hold it off until 3.7 but given that the code is
  well-isolated to OMAP and they are eager to see it go in, I didn't
  push back hard in that direction."

* tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP4: CPUidle: Open broadcast clock-event device.
  ARM: OMAP4: CPUidle: add synchronization for coupled idle states
  ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.
  ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
2012-08-02 11:48:54 -07:00
Linus Torvalds d1494ba8c3 ARM: SoC fixes
A few fixes for merge window fallout, and a bugfix for timer resume
 on PRIMA2.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQGraYAAoJEIwa5zzehBx3eCEP+QHCKDWVz+8bloVe09EOvLvG
 VQzlTzGhQtJmQTeOY40gvGG0Fq+w/GdV5VG2/ovIpgB2ntvw/hUZha3Sm94MhOM8
 LxlM0lHX0/oNWUXTzsxDGETpED1lcshig2ScoTyG1DuRRIKBG736Szj7hPRH7ZBT
 PGmBIvu84qjynaHhCvpOkOQRYJRuZlmba6cJQZ6i7G1Y9hqCyBNT6IxjZ7adB4PH
 Ahc3ZrgniLp8JLx4tGudp86ST65rTn08KkgnN4JNaVFjyUuvGCAa/1M+aZfypGWK
 YbMjE4FXoooCsW5a4gK4HRPk9OGp8+LLR/RlEjnhX289/+0ReHKoAJxoYYEqJ+IO
 6tsVtERU/9qaSTleakKfTWxsL32aSFR7QbA0hQXwZeQXPsRs6HP7V/1FqzVRd3qN
 fbXerVx7SzkxO6Q+psBWhDOx9dALlltG+mXXuaOlJ4NCKRnZA/8kIeQW9xEtJbby
 bbabF9xCpp2DQgE30tx6eSMTdctuP1J90y5OFKNNxeqYWjvZW5iw7LMwbeqymK4H
 wky93bc4Z6rErBXjPH2Mg66NdM2YxPA9SJY6t5S26hNa/noPRzXwBsapfsB6zlIT
 Ewx+IhLdMal0BH7va3VSKLj3LbX6O8X1YCjFmRz8Tev90n9VMQABnCvGB2XdJbTp
 M0wbQnv7lYKJJ65XJYpV
 =BkSN
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes for merge window fallout, and a bugfix for timer resume on
  PRIMA2."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mmp: add missing irqs.h
  arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
  ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
  ARM: mxc: Include missing irqs.h header
2012-08-02 11:48:20 -07:00
Linus Torvalds 0a276d1675 SuperH fixes for 3.6-rc1 merge window
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iEYEABECAAYFAlAaIN8ACgkQGkmNcg7/o7gpMgCgtmCJeUrSCc/eVKGy5ik1BPnC
 3DAAoLdqCJflwx4mrN48kkXQj9SA4Xko
 =Y6yl
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
  sh: explicitly include sh_dma.h in setup-sh7722.c
  sh: ecovec: care CN5 VBUS if USB host mode
  sh: sh7724: fixup renesas_usbhs clock settings
  sh: intc: initial irqdomain support.
  sh: pfc: Fix up init ordering mess.
  serial: sh-sci: fix compilation breakage, when DMA is enabled
  dmaengine: shdma: restore partial transfer calculation
  sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
  sh: Fix up recursive fault in oops with unset TTB.
  sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
  sh: select the fixed regulator driver on several boards
  sh: ecovec: switch MMC power control to regulators
  sh: add fixed voltage regulators to se7724
  sh: add fixed voltage regulators to sdk7786
  sh: add fixed voltage regulators to rsk
  sh: add fixed voltage regulators to migor
  sh: add fixed voltage regulators to kfr2r09
  sh: add fixed voltage regulators to ap325rxa
  sh: add fixed voltage regulators to sh7757lcr
  sh: add fixed voltage regulators to sh2007
  ...
2012-08-02 11:45:42 -07:00
Haojian Zhuang bac6f61550 ARM: mmp: add missing irqs.h
arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here
(not in a function)
make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1

Include <mach/irqs.h> to fix this issue.

Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02 10:15:59 -07:00
Thomas Petazzoni 10b683cba5 arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
The comment was wrongly referring to Armada 370 while the file is
related to Armada XP.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02 10:05:32 -07:00
Barry Song debeaf6c2d ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
The only way to write LATCHED registers to write LATCH_BIT to LATCH register,
that will latch COUNTER into LATCHED.e.g.
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base +
	SIRFSOC_TIMER_LATCH);

Writing values to LATCHED registers directly is useless at all.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02 10:05:27 -07:00
Konrad Rzeszutek Wilk 5bc6f9888d xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.
When we release pages back during bootup:

Freeing  9d-100 pfn range: 99 pages freed
Freeing  9cf36-9d0d2 pfn range: 412 pages freed
Freeing  9f6bd-9f6bf pfn range: 2 pages freed
Freeing  9f714-9f7bf pfn range: 171 pages freed
Freeing  9f7e0-9f7ff pfn range: 31 pages freed
Freeing  9f800-100000 pfn range: 395264 pages freed
Released 395979 pages of unused memory

We then try to populate those pages back. In the P2M tree however
the space for those leafs must be reserved - as such we use extend_brk.
We reserve 8MB of _brk space, which means we can fit over
1048576 PFNs - which is more than we should ever need.

Without this, on certain compilation of the kernel we would hit:

(XEN) domain_crash_sync called from entry.S
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff818aad3b>]
(XEN) RFLAGS: 0000000000000206   EM: 1   CONTEXT: pv guest
(XEN) rax: ffffffff81a7c000   rbx: 000000000000003d   rcx: 0000000000001000
(XEN) rdx: ffffffff81a7b000   rsi: 0000000000001000   rdi: 0000000000001000
(XEN) rbp: ffffffff81801cd8   rsp: ffffffff81801c98   r8:  0000000000100000
(XEN) r9:  ffffffff81a7a000   r10: 0000000000000001   r11: 0000000000000003
(XEN) r12: 0000000000000004   r13: 0000000000000004   r14: 000000000000003d
(XEN) r15: 00000000000001e8   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) cr3: 0000000125803000   cr2: 0000000000000000
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) Guest stack trace from rsp=ffffffff81801c98:

.. which is extend_brk hitting a BUG_ON.

Interestingly enough, most of the time we are not going to hit this
b/c the _brk space is quite large (v3.5):
 ffffffff81a25000 B __brk_base
 ffffffff81e43000 B __brk_limit
= ~4MB.

vs earlier kernels (with this back-ported), the space is smaller:
 ffffffff81a25000 B __brk_base
 ffffffff81a7b000 B __brk_limit
= 344 kBytes.

where we would certainly hit this and hit extend_brk.

Note that git commit c3d93f8801
(xen: populate correct number of pages when across mem boundary (v2))
exposed this bug).

[v1: Made it 8MB of _brk space instead of 4MB per Jan's suggestion]

CC: stable@vger.kernel.org #only for 3.5
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-08-02 10:39:53 -04:00
Fabio Estevam 2d4e6dc628 ARM: dts: imx27-3ds.dts: Fix serial console node
Fix serial console node and allow the board to boot again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-02 11:14:39 +02:00
Jiri Kosina a27032eee8 sparc64: do not clobber personality flags in sys_sparc64_personality()
There are multiple errors in how sys_sparc64_personality() handles
personality flags stored in top three bytes.

- directly comparing current->personality against PER_LINUX32 doesn't work
  in cases when any of the personality flags stored in the top three bytes
  are used.
- directly forcefully setting personality to PER_LINUX32 or PER_LINUX
  discards any flags stored in the top three bytes

Fix the first one by properly using personality() macro to compare only
PER_MASK bytes.
Fix the second one by setting only the bits that should be set, instead of
overwriting the whole value.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-02 00:26:50 -07:00
Guennadi Liakhovetski 08298f0612 sh: explicitly include sh_dma.h in setup-sh7722.c
setup-sh7722.c defines several objects, whose types are defined in
sh_dma.h, so, it has to be included explicitly.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-02 15:37:26 +09:00
Linus Torvalds 1a9b4993b7 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "The lion share of this pull request are fixes for clk-related breakage
  caused by other changes during this merge window.  For some platforms
  the fix was as simple as selecting HAVE_CLK, for others like the
  Loongson 2 significant restructuring was required.

  The remainder are changes required to get the Lantiq code to work
  again."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Loongson 2: Sort out clock managment.
  MIPS: Loongson 1: more clk support and add select HAVE_CLK
  MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK
  MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK
  MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK
  MIPS: Lantiq: Platform specific CLK fixup
  MIPS: Lantiq: Add device_tree_init function
  MIPS: Lantiq: Fix interface clock and PCI control register offset
2012-08-01 16:47:15 -07:00
Linus Torvalds 1871e845e5 Merge branch 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
 "This patch set contains mostly fixes and cleanups.  The UML tty driver
  uses now tty_port and is no longer broken like hell  :-)"

* 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Add arch/x86/um to MAINTAINERS
  um: pass siginfo to guest process
  um: fix ubd_file_size for read-only files
  um: pull interrupt_end() into userspace()
  um: split syscall_trace(), pass pt_regs to it
  um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs
  um: set BLK_CGROUP=y in defconfig
  um: remove count_lock
  um: fully use tty_port
  um: Remove dead code
  um: remove line_ioctl()
  TTY: um/line, use tty from tty_port
  TTY: um/line, add tty_port
2012-08-01 16:45:02 -07:00
Linus Torvalds a6dc77254b Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM DMA engine updates from Russell King:
 "This looks scary at first glance, but what it is is:
   - a rework of the sa11x0 DMA engine driver merged during the previous
     cycle, to extract a common set of helper functions for DMA engine
     implementations.
   - conversion of amba-pl08x.c to use these helper functions.
   - addition of OMAP DMA engine driver (using these helper functions),
     and conversion of some of the OMAP DMA users to use DMA engine.

  Nothing in the helper functions is ARM specific, so I hope that other
  implementations can consolidate some of their code by making use of
  these helpers.

  This has been sitting in linux-next most of the merge cycle, and has
  been tested by several OMAP folk.  I've tested it on sa11x0 platforms,
  and given it my best shot on my broken platforms which have the
  amba-pl08x controller.

  The last point is the addition to feature-removal-schedule.txt, which
  will have a merge conflict.  Between myself and TI, we're planning to
  remove the old TI DMA implementation next year."

Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt
and drivers/dma/{Kconfig,Makefile}

* 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits)
  ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine
  ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails
  Add feature removal of old OMAP private DMA implementation
  mtd: omap2: remove private DMA API implementation
  mtd: omap2: add DMA engine support
  spi: omap2-mcspi: remove private DMA API implementation
  spi: omap2-mcspi: add DMA engine support
  ARM: omap: remove mmc platform data dma_mask and initialization
  mmc: omap: remove private DMA API implementation
  mmc: omap: add DMA engine support
  mmc: omap_hsmmc: remove private DMA API implementation
  mmc: omap_hsmmc: add DMA engine support
  dmaengine: omap: add support for cyclic DMA
  dmaengine: omap: add support for setting fi
  dmaengine: omap: add support for returning residue in tx_state method
  dmaengine: add OMAP DMA engine driver
  dmaengine: sa11x0-dma: add cyclic DMA support
  dmaengine: sa11x0-dma: fix DMA residue support
  dmaengine: PL08x: ensure all descriptors are freed when channel is released
  dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking
  ...
2012-08-01 16:41:07 -07:00
Linus Torvalds 02a6ec6a24 Merge branch 'audit' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM audit/signal updates from Russell King:
 "ARM audit/signal handling updates from Al and Will.  This improves on
  the work Viro did last merge window, and sorts out some of the issues
  found with that work."

* 'audit' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7475/1: sys_trace: allow all syscall arguments to be updated via ptrace
  ARM: 7474/1: get rid of TIF_SYSCALL_RESTARTSYS
  ARM: 7473/1: deal with handlerless restarts without leaving the kernel
  ARM: 7472/1: pull all work_pending logics into C function
  ARM: 7471/1: Revert "7442/1: Revert "remove unused restart trampoline""
  ARM: 7470/1: Revert "7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK""
2012-08-01 16:35:37 -07:00
Linus Torvalds 9a2533c3eb Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "This fixes various issues found during July"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT caches
  ARM: Fix undefined instruction exception handling
  ARM: 7480/1: only call smp_send_stop() on SMP
  ARM: 7478/1: errata: extend workaround for erratum #720789
  ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP
  ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend
  ARM: 7468/1: ftrace: Trace function entry before updating index
  ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+
  ARM: 7466/1: disable interrupt before spinning endlessly
  ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start option
2012-08-01 16:30:45 -07:00
Avi Kivity aa67f6096c KVM: VMX: Fix ds/es corruption on i386 with preemption
Commit b2da15ac26 ("KVM: VMX: Optimize %ds, %es reload") broke i386
in the following scenario:

  vcpu_load
  ...
  vmx_save_host_state
  vmx_vcpu_run
  (ds.rpl, es.rpl cleared by hardware)

  interrupt
    push ds, es  # pushes bad ds, es
    schedule
      vmx_vcpu_put
        vmx_load_host_state
          reload ds, es (with __USER_DS)
    pop ds, es  # of other thread's stack
    iret
  # other thread runs
  interrupt
    push ds, es
    schedule  # back in vcpu thread
    pop ds, es  # now with rpl=0
    iret
  ...
  vcpu_put
  resume_userspace
  iret  # clears ds, es due to mismatched rpl

(instead of resume_userspace, we might return with SYSEXIT and then
take an exception; when the exception IRETs we end up with cleared
ds, es)

Fix by avoiding the optimization on i386 and reloading ds, es on the
lightweight exit path.

Reported-by: Chris Clayron <chris2553@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-08-01 20:23:57 -03:00
H. Peter Anvin eaf4ce6c5f x86-64, kcmp: The kcmp system call can be common
We already use the same system call handler for i386 and x86-64, there
is absolutely no reason x32 can't use the same system call, too.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: <stable@vger.kernel.org> v3.5
Link: http://lkml.kernel.org/n/tip-vwzk3qbcr3yjyxjg2j38vgy9@git.kernel.org
2012-08-01 16:01:06 -07:00
Martin Pärtel d3c1cfcdb4 um: pass siginfo to guest process
UML guest processes now get correct siginfo_t for SIGTRAP, SIGFPE,
SIGILL and SIGBUS. Specifically, si_addr and si_code are now correct
where previously they were si_addr = NULL and si_code = 128.

Signed-off-by: Martin Pärtel <martin.partel@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-02 00:49:17 +02:00
Martin Pärtel d4afcba95f um: fix ubd_file_size for read-only files
Made ubd_file_size not request write access. Fixes use of read-only images.

Signed-off-by: Martin Pärtel <martin.partel@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-02 00:44:49 +02:00
Al Viro b8a4209523 um: pull interrupt_end() into userspace()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-02 00:25:44 +02:00
Al Viro 1bfa2317b2 um: split syscall_trace(), pass pt_regs to it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[richard@nod.at: Fixed some minor build issues]
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-02 00:25:38 +02:00
Al Viro a3170d2ec2 um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-01 23:33:16 +02:00
Bruce Rogers 4b6486659a KVM: x86: apply kvmclock offset to guest wall clock time
When a guest migrates to a new host, the system time difference from the
previous host is used in the updates to the kvmclock system time visible
to the guest, resulting in a continuation of correct kvmclock based guest
timekeeping.

The wall clock component of the kvmclock provided time is currently not
updated with this same time offset. Since the Linux guest caches the
wall clock based time, this discrepency is not noticed until the guest is
rebooted. After reboot the guest's time calculations are off.

This patch adjusts the wall clock by the kvmclock_offset, resulting in
correct guest time after a reboot.

Cc: Zachary Amsden <zamsden@gmail.com>
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-08-01 17:23:50 -03:00
Linus Torvalds d4fdc32517 fbdev updates for 3.6
It includes:
 - large updates for OMAP
   - support for LCD3 overlay manager (omap5)
   - omapdss output cleanup
   - removal of passive matrix LCD support as there are no drivers for
     such panels for DSS or DSS2 and nobody complained (cleanup)
 - large updates for SH Mobile
   - overlay support
   - separating MERAM (cache) from framebuffer driver
 - some updates for Exynos and da8xx-fb
 - various other small patches
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQGSWqAAoJECSVL5KnPj1PnEQP/RQ5NWKlgkPloLkWrLc8stN/
 0AKWgxBJ0BuJBW6CJCKVy76kkCBW2PZ7bHsFLNuX490KnPwt1cz3sLni78UiW1CZ
 bNlN5UKshOfC511BxF5GZjtLvvkj5+ocmoybq27MhBoJn/7EVbli7lSeYjEWeWuk
 sTq6wJTBJ8Nc4PEWdPhIbiWe7NgnCge27AOHrzUV5cRHxdHtl+mqD99Ky7UdMsHz
 qBVTVmtEmLh2g3KMuu5rByuDDlUqhpi0sKorGsNWk92rpUnVsc4E4/v06JJqB3n8
 ef3q352GK32LKpWwX78pm5+DJMhpSMFJg6UrvQu03gQSU5Pw3O4Dl8g+hh6FgcMo
 niYZ+g07K0D8BSqdTwy9gwRTSWLPHplR8xz9VsW3+jdmFFuQgB6suA2Dk2E/K3Cf
 12jurwegypfI5KutRyTz7IuTw/8OhHs4x0PJWcSw3lq1czUM212vqDWKYJFbgznq
 6s8sHLWnQg0U47LYTCNV/mA4QRlE4ewE3B6wIVrzPvcTIinKqO1hky10fZ4+sEw6
 gH6bnSBvlRgYOYhy/MPInz0Gt6YfzK26M6ZPMq2DU7gZ6OFcL9IrnqWDdnZMwwD9
 j15DWeU2XPMc8vAGpdg2giq3VmQ53rviwLgp7Ht6fGrTLk1z4q167zGUSOvo3KQi
 Ai90ycCBgAGLorHhdCI1
 =22b7
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 - large updates for OMAP
   - support for LCD3 overlay manager (omap5)
   - omapdss output cleanup
   - removal of passive matrix LCD support as there are no drivers for
     such panels for DSS or DSS2 and nobody complained (cleanup)
 - large updates for SH Mobile
   - overlay support
   - separating MERAM (cache) from framebuffer driver
 - some updates for Exynos and da8xx-fb
 - various other small patches

* tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6: (78 commits)
  da8xx-fb: fix compile issue due to missing include
  fbdev: Make pixel_to_pat() failure mode more friendly
  da8xx-fb: do not turn ON LCD backlight unless LCDC is enabled
  fbdev: sh_mobile_lcdc: Fix vertical panning step
  video: exynos mipi dsi: Fix mipi dsi regulators handling issue
  video: da8xx-fb: do clock reset of revision 2 LCDC before enabling
  arm: da850: configure LCDC fifo threshold
  video: da8xx-fb: configure FIFO threshold to reduce underflow errors
  video: da8xx-fb: fix flicker due to 1 frame delay in updated frame
  video: da8xx-fb rev2: fix disabling of palette completion interrupt
  da8xx-fb: add missing FB_BLANK operations
  video: exynos_dp: use usleep_range instead of delay
  video: exynos_dp: check the only INTERLANE_ALIGN_DONE bit during Link Training
  fb: epson1355fb: Fix section mismatch
  video: exynos_dp: fix wrong DPCD address during Link Training
  video/smscufx: fix line counting in fb_write
  aty128fb: Fix coding style issues
  fbdev: sh_mobile_lcdc: Fix pan offset computation in YUV mode
  fbdev: sh_mobile_lcdc: Fix overlay registers update during pan operation
  fbdev: sh_mobile_lcdc: Support horizontal panning
  ...
2012-08-01 10:45:12 -07:00
Linus Torvalds a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Ralf Baechle 95cf1468f7 MIPS: Loongson 2: Sort out clock managment.
For unexplainable reasons the Loongson 2 clock API was implemented in a
module so fixing this involved shifting large amounts of code around.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 18:10:06 +02:00
Yoichi Yuasa 4b00951f6f MIPS: Loongson 1: more clk support and add select HAVE_CLK
This fixes a redefinition of clk_*:

arch/mips/loongson1/common/clock.c:23:13: error: redefinition of 'clk_get'
include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here
arch/mips/loongson1/common/clock.c:41:15: error: redefinition of 'clk_get_rate'
include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here
make[3]: *** [arch/mips/loongson1/common/clock.o] Error 1

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Reviewed-by: John Crispin <blogic@openwrt.org>
Acked-by: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/4143/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 17:59:23 +02:00
Yoichi Yuasa 47cd7343f5 MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK
arch/mips/txx9/generic/setup.c:87:13: error: redefinition of 'clk_get'
include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here
arch/mips/txx9/generic/setup.c:97:5: error: redefinition of 'clk_enable'
include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here
arch/mips/txx9/generic/setup.c:103:6: error: redefinition of 'clk_disable'
include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here
arch/mips/txx9/generic/setup.c:108:15: error: redefinition of 'clk_get_rate'
include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here
arch/mips/txx9/generic/setup.c:114:6: error: redefinition of 'clk_put'
include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here
make[3]: *** [arch/mips/txx9/generic/setup.o] Error 1

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Reviewed-by: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/4142/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 17:59:15 +02:00
Yoichi Yuasa 3e82eeebad MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK
arch/mips/bcm63xx/clk.c:249:5: error: redefinition of 'clk_enable'
include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here
arch/mips/bcm63xx/clk.c:259:6: error: redefinition of 'clk_disable'
include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here
arch/mips/bcm63xx/clk.c:268:15: error: redefinition of 'clk_get_rate'
include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here
arch/mips/bcm63xx/clk.c:275:13: error: redefinition of 'clk_get'
include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here
arch/mips/bcm63xx/clk.c:302:6: error: redefinition of 'clk_put'
include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here
make[2]: *** [arch/mips/bcm63xx/clk.o] Error 1

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Reviewed-by: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/4141/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 17:59:06 +02:00
Yoichi Yuasa 8551fb643a MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK
arch/mips/ar7/clock.c:420:5: error: redefinition of 'clk_enable'
include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here
arch/mips/ar7/clock.c:426:6: error: redefinition of 'clk_disable'
include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here
arch/mips/ar7/clock.c:431:15: error: redefinition of 'clk_get_rate'
include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here
arch/mips/ar7/clock.c:437:13: error: redefinition of 'clk_get'
include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here
arch/mips/ar7/clock.c:454:6: error: redefinition of 'clk_put'
include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here
make[2]: *** [arch/mips/ar7/clock.o] Error 1

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Reviewed-by: John Crispin <blogic@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/4140/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 17:58:57 +02:00
John Crispin b902d9a98e MIPS: Lantiq: Platform specific CLK fixup
As we use CLKDEV_LOOKUP but dont have support for COMMON_CLK yet, we need to
provide our own version of of_clk_get_from_provider().

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4117/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 17:58:09 +02:00
John Crispin a9188bc162 MIPS: Lantiq: Add device_tree_init function
Add a lantiq specific version of device_tree_init. The generic MIPS version
was removed by.

commit 594e966bc412d64eec9282d28ce511bdd62fea39
Author: David Daney <david.daney@cavium.com>
Date:   Thu Jul 5 18:12:38 2012 +0200

MIPS: Prune some target specific code out of prom.c

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4116/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 17:58:04 +02:00
John Crispin e29b72f5e1 MIPS: Lantiq: Fix interface clock and PCI control register offset
The XRX200 based SoC have a different register offset for the interface
clock and PCI control registers. This patch detects the SoC and sets the
register offset at runtime. This make PCI work on the VR9 SoC.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4113/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 17:57:04 +02:00
Paul Mundt f38770477a Merge branch 'common/irqdomain' into sh-latest 2012-08-01 17:14:52 +09:00
Kuninori Morimoto 1ca8fe38a6 sh: ecovec: care CN5 VBUS if USB host mode
renesas_usbhs driver can control both USB Host/Gadget,
but it needs VBUS output if Host mode.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01 17:14:42 +09:00
Kuninori Morimoto 8a87776dee sh: sh7724: fixup renesas_usbhs clock settings
8cc88a55b0
(sh: sh7724: use runtime PM implementation) broke sh7724 clocks.

renesas_usbhs needs HWBLK_USB0/1 clock on sh7724

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-08-01 17:14:40 +09:00
Paul Mundt 91ba548cfd Merge branch 'sh/dmaengine' into sh-latest 2012-08-01 13:49:13 +09:00
Linus Torvalds 2d53492620 irqdomain changes for Linux v3.6
Round of refactoring and enhancements to irq_domain infrastructure. This
 series starts the process of simplifying irqdomain. The ultimate goal is
 to merge LEGACY, LINEAR and TREE mappings into a single system, but had
 to back off from that after some last minute bugs. Instead it mainly
 reorganizes the code and ensures that the reverse map gets populated
 when the irq is mapped instead of the first time it is looked up.
 
 Merging of the irq_domain types is deferred to v3.7
 
 In other news, this series adds helpers for creating static mappings on
 a linear or tree mapping.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQGKKkAAoJEEFnBt12D9kB59gQAJnTjrihej1tr0OEkffIthGK
 RyVI/DMo0jMgLs4K/rIo3Y+PdTSsNYd8x4R7ln8O7rNRQn8W6jE6NQgoMh51EvNc
 FAltmTsBldq6hUNuz2FEnbmojBP4QklTzL8bAiXtX5EufWQsgMsP4guOuHXLCjEV
 CkWYVk/slXEWJ8yYJc6GKVRvL+CNeiXVCTcOsYA0CI3ofN7O0rd+YAL314CRllIc
 e5uARbWM+s9FJ/eXwCZP4+3jCmdI/CHJb284WldMc/mBD8Rbiqpb4kH6AZI+TH2O
 CyiNEPWs6FG5eJPTID7HrOarXGzwYq/pvv8iG7Mh8NiKSae1C1HdkHelCjbLQ+pU
 POya0fWF1Gvzlmw0gHik86dqaKjwb29btjj7SFg8KnQExWn2ifhsY70mM9wCTo3s
 cwcQlssDIsARE83nttTFCoV/iAWh9AvTxafrXu/+9OKTjpsYlC8kgzdVjq5aAxON
 JaAUK1OduTWRsd1TabKlh6naRXr9nRcLKikwKri2oYVKkj97wahBuib4ffzAcNqz
 VklRBxTH6M+dz/t5NpcVyLXJpqzTN++QNdTAmeQG6LOnHJL4tpFTsx5sMa7ghmzX
 LNpmp/AkVfP0MT7Drf0FUUx6iFA7sjANYzcepUVDrPGKHx0E3LyqbG5JKcC5LgM6
 +UIoKAktF3vY7pdZJL9z
 =ZUF/
 -----END PGP SIGNATURE-----

Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull irqdomain changes from Grant Likely:
 "Round of refactoring and enhancements to irq_domain infrastructure.
  This series starts the process of simplifying irqdomain.  The ultimate
  goal is to merge LEGACY, LINEAR and TREE mappings into a single
  system, but had to back off from that after some last minute bugs.
  Instead it mainly reorganizes the code and ensures that the reverse
  map gets populated when the irq is mapped instead of the first time it
  is looked up.

  Merging of the irq_domain types is deferred to v3.7

  In other news, this series adds helpers for creating static mappings
  on a linear or tree mapping."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  irqdomain: Improve diagnostics when a domain mapping fails
  irqdomain: eliminate slow-path revmap lookups
  irqdomain: Fix irq_create_direct_mapping() to test irq_domain type.
  irqdomain: Eliminate dedicated radix lookup functions
  irqdomain: Support for static IRQ mapping and association.
  irqdomain: Always update revmap when setting up a virq
  irqdomain: Split disassociating code into separate function
  irq_domain: correct a minor wrong comment for linear revmap
  irq_domain: Standardise legacy/linear domain selection
  irqdomain: Make ops->map hook optional
  irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY
  irqdomain: Simple NUMA awareness.
  devicetree: add helper inline for retrieving a node's full name
2012-07-31 20:44:03 -07:00
Andres Salomon 1fcfd08bd0 x86: OLPC: move s/r-related EC cmds to EC driver
The new EC driver calls platform-specific suspend and resume hooks; run
XO-1-specific EC commands from there, rather than deep in s/r code.  If we
attempt to run EC commands after the new EC driver has suspended, it is
refused by the ec->suspended checks.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:31 -04:00
Andres Salomon 6cca83d498 Platform: OLPC: move debugfs support from x86 EC driver
There's nothing about the debugfs interface for the EC driver that is
architecture-specific, so move it into the arch-independent driver.

The code is mostly unchanged with the exception of renamed variables, coding
style changes, and API updates.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:31 -04:00
Andres Salomon 85f90cf6ca x86: OLPC: switch over to using new EC driver on x86
This uses the new EC driver framework in drivers/platform/olpc.  The
XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff
(including a new workqueue; no more running EC commands with IRQs disabled!)
can be shared with other architectures.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:30 -04:00
Andres Salomon 3bf9428f22 drivers: OLPC: update various drivers to include olpc-ec.h
Switch over to using olpc-ec.h in multiple steps, so as not to break builds.
This covers every driver that calls olpc_ec_cmd().

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:29 -04:00
Andres Salomon 392a325c43 Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
The OLPC EC driver has outgrown arch/x86/platform/.  It's time to both
share common code amongst different architectures, as well as move it out
of arch/x86/.  The XO-1.75 is ARM-based, and the EC driver shares a lot of
code with the x86 code.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:29 -04:00
Linus Torvalds ac694dbdbc Merge branch 'akpm' (Andrew's patch-bomb)
Merge Andrew's second set of patches:
 - MM
 - a few random fixes
 - a couple of RTC leftovers

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
  rtc/rtc-88pm80x: remove unneed devm_kfree
  rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails
  mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
  tmpfs: distribute interleave better across nodes
  mm: remove redundant initialization
  mm: warn if pg_data_t isn't initialized with zero
  mips: zero out pg_data_t when it's allocated
  memcg: gix memory accounting scalability in shrink_page_list
  mm/sparse: remove index_init_lock
  mm/sparse: more checks on mem_section number
  mm/sparse: optimize sparse_index_alloc
  memcg: add mem_cgroup_from_css() helper
  memcg: further prevent OOM with too many dirty pages
  memcg: prevent OOM with too many dirty pages
  mm: mmu_notifier: fix freed page still mapped in secondary MMU
  mm: memcg: only check anon swapin page charges for swap cache
  mm: memcg: only check swap cache pages for repeated charging
  mm: memcg: split swapin charge function into private and public part
  mm: memcg: remove needless !mm fixup to init_mm when charging
  mm: memcg: remove unneeded shmem charge type
  ...
2012-07-31 19:25:39 -07:00
Linus Torvalds 3e9a97082f This patch series contains a major revamp of how we collect entropy
from interrupts for /dev/random and /dev/urandom.  The goal is to
 addresses weaknesses discussed in the paper "Mining your Ps and Qs:
 Detection of Widespread Weak Keys in Network Devices", by Nadia
 Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will
 be published in the Proceedings of the 21st Usenix Security Symposium,
 August 2012.  (See https://factorable.net for more information and an
 extended version of the paper.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQF/0DAAoJENNvdpvBGATwIowQAOep9QKtLrBvb2lwIRVmeiy8
 lRf7V/tYZnz4FePbR0W92JQfKYkCV8yyOO0bmeRzWL3v4m+lRwDTSyA1DDyQMoH+
 LOMzvDKSLJMSXTXdSOIr1WYACphViCR/9CrbMBCKSkYfZLJ1MdaEDxT3rcpTGD0T
 6iknUweiSkHHhkerU5yQL7FKzD5kYUe0hsF47w7QVlHRHJsW2fsZqkFoh+RpnhNw
 03u+djxNGBo9qV81vZ9D1b0vA9uRlEjoWOOEG2XE4M2iq6TUySueA72dQnCwunfi
 3kG/u1Swv2dgq6aRrP3H7zdwhYSourGxziu3jNhEKwKEohrxYY7xjNX3RVeTqP67
 AzlKsOTWpRLIDrzjSLlb8VxRQiZewu8Unex3e1G+eo20sbcIObHGrxNp7K00zZvd
 QZiMHhOwItwFTe4lBO+XbqH2JKbL9/uJmwh5EipMpQTraKO9E6N3CJiUHjzBLo2K
 iGDZxRMKf4gVJRwDxbbP6D70JPVu8ZJ09XVIpsXQ3Z1xNqaMF0QdCmP3ty56q1o0
 NvkSXxPKrijZs8Sk0rVDqnJ3ll8PuDnXMv5eDtL42VT818I5WxESn9djjwEanGv0
 TYxbFub/NRxmPEE5B2Js5FBpqsLf5f282OSMeS/5WLBbnHJR1OoPoAhGVpHvxntC
 bi5FC1OolqhvzVIdsqgt
 =u7KM
 -----END PGP SIGNATURE-----

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

Pull random subsystem patches from Ted Ts'o:
 "This patch series contains a major revamp of how we collect entropy
  from interrupts for /dev/random and /dev/urandom.

  The goal is to addresses weaknesses discussed in the paper "Mining
  your Ps and Qs: Detection of Widespread Weak Keys in Network Devices",
  by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J.  Alex Halderman,
  which will be published in the Proceedings of the 21st Usenix Security
  Symposium, August 2012.  (See https://factorable.net for more
  information and an extended version of the paper.)"

Fix up trivial conflicts due to nearby changes in
drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c}

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits)
  random: mix in architectural randomness in extract_buf()
  dmi: Feed DMI table to /dev/random driver
  random: Add comment to random_initialize()
  random: final removal of IRQF_SAMPLE_RANDOM
  um: remove IRQF_SAMPLE_RANDOM which is now a no-op
  sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op
  board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op
  isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out
  uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op
  drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op
  xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op
  n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op
  i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op
  input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op
  mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op
  ...
2012-07-31 19:07:42 -07:00
Minchan Kim 93180cec00 mips: zero out pg_data_t when it's allocated
This patch is preparation for the next patch which removes the zeroing of
the pg_data_t in core MM.  All archs except MIPS already do this.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Tejun Heo <tj@kernel.org>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:49 -07:00
Andrew Morton c255a45805 memcg: rename config variables
Sanity:

CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG
CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED
CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM

[mhocko@suse.cz: fix missed bits]
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:43 -07:00
Huang Shijie 44de9d0cad mm: account the total_vm in the vm_stat_account()
vm_stat_account() accounts the shared_vm, stack_vm and reserved_vm now.
But we can also account for total_vm in the vm_stat_account() which makes
the code tidy.

Even for mprotect_fixup(), we can get the right result in the end.

Signed-off-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:39 -07:00
Fengguang Wu c66af41118 xtensa: select generic atomic64_t support
This will fix build errors:

block/blk-cgroup.c:609:2: error: unknown type name 'atomic64_t'
block/blk-cgroup.c:609:2: error: implicit declaration of function 'ATOMIC64_INIT' [-Werror=implicit-function-declaration]

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:39 -07:00
Linus Torvalds bca1a5c0ea Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "The biggest changes are Intel Nehalem-EX PMU uncore support, uprobes
  updates/cleanups/fixes from Oleg and diverse tooling updates (mostly
  fixes) now that Arnaldo is back from vacation."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  uprobes: __replace_page() needs munlock_vma_page()
  uprobes: Rename vma_address() and make it return "unsigned long"
  uprobes: Fix register_for_each_vma()->vma_address() check
  uprobes: Introduce vaddr_to_offset(vma, vaddr)
  uprobes: Teach build_probe_list() to consider the range
  uprobes: Remove insert_vm_struct()->uprobe_mmap()
  uprobes: Remove copy_vma()->uprobe_mmap()
  uprobes: Fix overflow in vma_address()/find_active_uprobe()
  uprobes: Suppress uprobe_munmap() from mmput()
  uprobes: Uprobe_mmap/munmap needs list_for_each_entry_safe()
  uprobes: Clean up and document write_opcode()->lock_page(old_page)
  uprobes: Kill write_opcode()->lock_page(new_page)
  uprobes: __replace_page() should not use page_address_in_vma()
  uprobes: Don't recheck vma/f_mapping in write_opcode()
  perf/x86: Fix missing struct before structure name
  perf/x86: Fix format definition of SNB-EP uncore QPI box
  perf/x86: Make bitfield unsigned
  perf/x86: Fix LLC-* and node-* events on Intel SandyBridge
  perf/x86: Add Intel Nehalem-EX uncore support
  perf/x86: Fix typo in format definition of uncore PCU filter
  ...
2012-07-31 15:34:13 -07:00
Linus Torvalds ec7a19bfec Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "Kumar sent me a handful of Freescale related fixes and I added another
  regression fix to the pile.

  PS.  I -will- eventually learn about that signed tag business :-)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/kvm/book3s_32: Fix MTMSR_EERI macro
  powerpc/85xx: p1022ds: fix DIU/LBC switching with NAND enabled
  powerpc/85xx: p1022ds: disable the NAND flash node if video is enabled
  powerpc/85xx: Fix sram_offset parameter type
  powerpc/85xx: P3041DS - change espi input-clock from 40MHz to 35MHz
  powerpc/85xx: Fix pci base address error for p2020rdb-pc in dts
2012-07-31 15:33:04 -07:00
Linus Torvalds 26847fa6eb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "This it the second batch of s390 patches for the 3.6 merge window.
  Included is enablement for two common code changes, killable page
  faults and sorted exception tables.  And the regular set of cleanup
  and bug fix patches."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: make use of user_mode() macro where possible
  s390/mm: rename user_mode variable to addressing_mode
  s390/mm: fix fault handling for page table walk case
  s390/mm: make page faults killable
  s390: update defconfig
  s390/mm: downgrade page table after fork of a 31 bit process
  s390/ipl: Use diagnose 8 command separation
  s390/linker script: use RO_DATA_SECTION
  s390/exceptions: sort exception table at build time
  s390/debug: remove module_exit function / move EXPORT_SYMBOLs
2012-07-31 15:32:05 -07:00
Peter Zijlstra d07bdfd322 perf/x86: Fix USER/KERNEL tagging of samples properly
Some PMUs don't provide a full register set for their sample,
specifically 'advanced' PMUs like AMD IBS and Intel PEBS which provide
'better' than regular interrupt accuracy.

In this case we use the interrupt regs as basis and over-write some
fields (typically IP) with different information.

The perf core however uses user_mode() to distinguish user/kernel
samples, user_mode() relies on regs->cs. If the interrupt skid pushed
us over a boundary the new IP might not be in the same domain as the
interrupt.

Commit ce5c1fe9a9 ("perf/x86: Fix USER/KERNEL tagging of samples")
tried to fix this by making the perf core use kernel_ip(). This
however is wrong (TM), as pointed out by Linus, since it doesn't allow
for VM86 and non-zero based segments in IA32 mode.

Therefore, provide a new helper to set the regs->ip field,
set_linear_ip(), which massages the regs into a suitable state
assuming the provided IP is in fact a linear address.

Also modify perf_instruction_pointer() and perf_callchain_user() to
deal with segments base offsets.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341910954.3462.102.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-31 17:02:04 +02:00
Andrew Morton 7740dfc036 perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit
i386 allmodconfig:

 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_hrtimer':
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:728: warning: integer overflow in expression
 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_start_hrtimer':
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:735: warning: integer overflow in expression

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-h84qlqj02zrojmxxybzmy9hi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-31 17:02:03 +02:00