Create a new helper to force the log up to the last LSN touching an
inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Qian Cai reports seemingly random buffer read verifier errors during
filesystem writeback. This was isolated to a recent patch that
factored out some inode cluster freeing code and happened to cast an
unsigned inode number type to a signed value. If the inode number
value overflows, we can skip marking in-core inodes associated with
the underlying buffer stale at the time the physical inodes are
freed. If such an inode happens to be dirty, xfsaild will eventually
attempt to write it back over non-inode blocks. The invalidation of
the underlying inode buffer causes writeback to read the buffer from
disk. This fails the read verifier (preventing eventual corruption)
if the buffer no longer looks like an inode cluster. Analysis by
Dave Chinner.
Fix up the helper to use the proper type for inode number values.
Fixes: 5806165a66 ("xfs: factor inode lookup from xfs_ifree_cluster")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations for file creations has
been removed, the resblks value should be larger than zero, so
remove unnecessary ternary conditional.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: s/judgment/ternary/]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There's lots of indent in this code which makes it a bit hard to
follow. We are also going to completely rework the inode lookup code
as part of the inode reclaim rework, so factor out the inode lookup
code from the inode cluster freeing code.
Based on prototype code from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We know the version is 3 if on a v5 file system. For earlier file
systems formats we always upgrade the remaining v1 inodes to v2 and
thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode
helper to check if we deal with small or large dinodes, and thus
remove the need for the di_version field in struct icdinode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
di_flags2 is initialized to zero for v4 and earlier file systems. This
means di_flags2 can only be non-zero for a v5 file systems, in which
case both the parent and child inodes can store the field. Remove the
extra di_version check, and also remove the rather pointless local
di_flags2 variable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a helper function to get rid of buffers that we have decided are
corrupt after the verifiers have run. This function is intended to
handle metadata checks that can't happen in the verifiers, such as
inter-block relationship checking. Note that we now mark the buffer
stale so that it will not end up on any LRU and will be purged on
release.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Just dereference bp->b_addr directly and make the code a little
simpler and more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the Linux inode i_uid/i_gid members everywhere and just convert
from/to the scalar value when reading or writing the on-disk inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of only synchronizing the uid/gid values in xfs_setup_inode,
ensure that they always match to prepare for removing the icdinode
fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert xfs_trans_get_buf() to return numeric error codes like most
everywhere else in xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
fs/xfs/xfs_inode.c: In function 'xfs_itruncate_extents_flags':
fs/xfs/xfs_inode.c:1523:8: warning: unused variable 'done' [-Wunused-variable]
commit 4bbb04abb4 ("xfs: truncate should remove
all blocks, not just to the end of the page cache")
left behind this, so remove it.
Fixes: 4bbb04abb4 ("xfs: truncate should remove all blocks, not just to the end of the page cache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_itruncate_extents_flags() is supposed to unmap every block in a file
from EOF onwards. Oddly, it uses s_maxbytes as the upper limit to the
bunmapi range, even though s_maxbytes reflects the highest offset the
pagecache can support, not the highest offset that XFS supports.
The result of this confusion is that if you create a 20T file on a
64-bit machine, mount the filesystem on a 32-bit machine, and remove the
file, we leak everything above 16T. Fix this by capping the bunmapi
request at the maximum possible block offset, not s_maxbytes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When target_ip exists in xfs_rename(), the xfs_dir_replace() call may
need to hold the AGF lock to allocate more blocks, and then invoking
the xfs_droplink() call to hold AGI lock to drop target_ip onto the
unlinked list, so we get the lock order AGF->AGI. This would break the
ordering constraint on AGI and AGF locking - inode allocation locks
the AGI, then can allocate a new extent for new inodes, locking the
AGF after the AGI.
In this patch we check whether the replace operation need more
blocks firstly. If so, acquire the agi lock firstly to preserve
locking order(AGI/AGF). Actually, the locking order problem only
occurs when we are locking the AGI/AGF of the same AG. For multiple
AGs the AGI lock will be released after the transaction committed.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: reword the comment]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no point in splitting the fields like this in an purely
in-memory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_icdinode is purely an in-memory data structure, so don't use
a log on-disk structure for it. This simplifies the code a bit, and
also reduces our include hell slightly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a minor indenting problem in xfs_trans_ichgtime]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we log something to dmesg whenever we return -EFSCORRUPTED up
the call stack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The xfs_bumplink() call has set the inode log fieldmask XFS_ILOG_CORE,
so the next xfs_trans_log_inode() call is not necessary.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no point in applying extent size hints for always COW inodes,
as we would just have to COW any extra allocation beyond the data
actually written.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When performing rename operation with RENAME_WHITEOUT flag, we will
hold AGF lock to allocate or free extents in manipulating the dirents
firstly, and then doing the xfs_iunlink_remove() call last to hold
AGI lock to modify the tmpfile info, so we the lock order AGI->AGF.
The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI. Hence
the ordering that is imposed by other parts of the code is AGI before
AGF. So we get an ABBA deadlock between the AGI and AGF here.
Process A:
Call trace:
? __schedule+0x2bd/0x620
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
__down_common+0xef/0x125
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agf+0xa6/0x180 [xfs]
? schedule_timeout+0x17d/0x290
xfs_alloc_read_agf+0x52/0x1f0 [xfs]
xfs_alloc_fix_freelist+0x432/0x590 [xfs]
? down+0x3b/0x50
? xfs_buf_lock+0x34/0xf0 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
xfs_alloc_vextent+0x301/0x6c0 [xfs]
xfs_ialloc_ag_alloc+0x182/0x700 [xfs]
? _xfs_trans_bjoin+0x72/0xf0 [xfs]
xfs_dialloc+0x116/0x290 [xfs]
xfs_ialloc+0x6d/0x5e0 [xfs]
? xfs_log_reserve+0x165/0x280 [xfs]
xfs_dir_ialloc+0x8c/0x240 [xfs]
xfs_create+0x35a/0x610 [xfs]
xfs_generic_create+0x1f1/0x2f0 [xfs]
...
Process B:
Call trace:
? __schedule+0x2bd/0x620
? xfs_bmapi_allocate+0x245/0x380 [xfs]
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
? xfs_buf_find+0x1fd/0x6c0 [xfs]
__down_common+0xef/0x125
? xfs_buf_get_map+0x37/0x230 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agi+0xa8/0x160 [xfs]
xfs_iunlink_remove+0x6f/0x2a0 [xfs]
? current_time+0x46/0x80
? xfs_trans_ichgtime+0x39/0xb0 [xfs]
xfs_rename+0x57a/0xae0 [xfs]
xfs_vn_rename+0xe4/0x150 [xfs]
...
In this patch we move the xfs_iunlink_remove() call to
before acquiring the AGF lock to preserve correct AGI/AGF locking
order.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The cast is not type safe, and we can just dereference the first
member instead to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Finish converting all the old inode_cluster_size >> inopblog users to
inodes_per_cluster.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Separate the inode geometry information into a distinct structure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are several functions which have no opportunity to return
an error, and don't contain any ASSERTs which could be argued
to be better constructed as error cases. So, make them voids
to simplify the callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If xfs_iflush_cluster() fails due to corruption, the error path
issues a shutdown and simulates an I/O completion to release the
buffer. This code has a couple small problems. First, the shutdown
sequence can issue a synchronous log force, which is unsafe to do
with buffer locks held. Second, the simulated I/O completion does not
guarantee the buffer is async and thus is unlocked and released.
For example, if the last operation on the buffer was a read off disk
prior to the corruption event, XBF_ASYNC is not set and the buffer
is left locked and held upon return. This results in a memory leak
as shown by the following message on module unload:
BUG xfs_buf (...): Objects remaining in xfs_buf on __kmem_cache_shutdown()
Fix both of these problems by setting XBF_ASYNC on the buffer prior
to the simulated I/O error and performing the shutdown immediately
after ioend processing when the buffer has been released.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When XFS creates an O_TMPFILE file, the inode is created with nlink = 1,
put on the unlinked list, and then the VFS sets nlink = 0 in d_tmpfile.
If we crash before anything logs the inode (it's dirty incore but the
vfs doesn't tell us it's dirty so we never log that change), the iunlink
processing part of recovery will then explode with a pile of:
XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file:
fs/xfs/xfs_log_recover.c, line: 5072
Worse yet, since nlink is nonzero, the inodes also don't get cleaned up
and they just leak until the next xfs_repair run.
Therefore, change xfs_iunlink to require that inodes being put on the
unlinked list have nlink == 0, change the tmpfile callers to instantiate
nodes that way, and set the nlink to 1 just prior to calling d_tmpfile.
Fix the comment for xfs_iunlink while we're at it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename this flag variable to imply more strongly that it's related to
the free inode btree (finobt) operation. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use a rhashtable to cache the unlinked list incore. This should speed
up unlinked processing considerably when there are a lot of inodes on
the unlinked list because iunlink_remove no longer has to traverse an
entire bucket list to find which inode points to the one being removed.
The incore list structure records "X.next_unlinked = Y" relations, with
the rhashtable using Y to index the records. This makes finding the
inode X that points to a inode Y very quick. If our cache fails to find
anything we can always fall back on the old method.
FWIW this drastically reduces the amount of time it takes to remove
inodes from the unlinked list. I wrote a program to open a lot of
O_TMPFILE files and then close them in the same order, which takes
a very long time if we have to traverse the unlinked lists. With the
ptach, I see:
+ /d/t/tmpfile/tmpfile
Opened 193531 files in 6.33s.
Closed 193531 files in 5.86s
real 0m12.192s
user 0m0.064s
sys 0m11.619s
+ cd /
+ umount /mnt
real 0m0.050s
user 0m0.004s
sys 0m0.030s
And without the patch:
+ /d/t/tmpfile/tmpfile
Opened 193588 files in 6.35s.
Closed 193588 files in 751.61s
real 12m38.853s
user 0m0.084s
sys 12m34.470s
+ cd /
+ umount /mnt
real 0m0.086s
user 0m0.000s
sys 0m0.060s
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add tracepoints so we can associate high level operations with low level
updates. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xfs_iunlink_remove we have two identical calls to
xfs_iunlink_update_inode, so move it out of the if statement to simplify
the code some more.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's a loop that searches an unlinked bucket list to find the inode
that points to a given inode. Hoist this into a separate function;
later we'll use our iunlink backref cache to bypass the slow list
operation. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Hoist the functions that update an inode's unlinked pointer updates into
a helper. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Strengthen our checking of the AGI unlinked pointers when we start to
use them for updating the metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Split the AGI unlinked bucket updates into a separate function. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix some indentation issues with the iunlink functions and reorganize
the tops of the functions to be identical. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Store the number of inodes and blocks per inode cluster in the mount
data so that we don't have to keep recalculating them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add new helpers to convert units of fs blocks into inodes, and AG blocks
into AG inodes, respectively. Convert all the open-coded conversions
and XFS_OFFBNO_TO_AGINO(, , 0) calls to use them, as appropriate. The
OFFBNO_TO_AGINO macro is retained for xfs_repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There is a statement that has an unwanted space in the indentation.
Remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that deferred operations are completely managed via
transactions, it's no longer necessary to cancel the dfops in error
paths that already cancel the associated transaction. There are a
few such calls lingering throughout the codebase.
Remove all remaining unnecessary calls to xfs_defer_cancel(). This
leaves xfs_defer_cancel() calls in two places. The first is the call
in the transaction cancel path itself, which facilitates this patch.
The second is made via the xfs_defer_finish() error path to provide
consistent error semantics with transaction commit. For example,
xfs_trans_commit() expects an xfs_defer_finish() failure to clean up
the dfops structure before it returns.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The current semantics of xfs_defer_finish() require the caller to
call xfs_defer_cancel() on error. This is slightly inconsistent with
transaction commit error handling where a failed commit cleans up
the transaction before returning.
More significantly, the only requirement for exposure of
->dop_pending outside of xfs_defer_finish() is so that
xfs_defer_cancel() can drain it on error. Since the only recourse of
xfs_defer_finish() errors is cancellation, mirror the transaction
logic and cancel remaining dfops before returning from
xfs_defer_finish() with an error.
Beside simplifying xfs_defer_finish() semantics, this ensures that
xfs_defer_finish() always returns with an empty ->dop_pending and
thus facilitates removal of the list from xfs_defer_ops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inodes that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While inodes are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for inodes with ili_lock_flags == 0.
Replace the xfs_defer_ijoin() infrastructure with such detection and
automatic relogging of held inodes. This eliminates the need for the
per-dfops inode list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log items that require relogging during deferred operations
processing are explicitly joined to the associated dfops via the
xfs_defer_*join() helpers. These calls imply that the associated
object is "held" by the transaction such that when rolled, the item
can be immediately joined to a follow up transaction. For buffers,
this means the buffer remains locked and held after each roll. For
inodes, this means that the inode remains locked.
Failure to join a held item to the dfops structure means the
associated object pins the tail of the log while dfops processing
completes, because the item never relogs and is not unlocked or
released until deferred processing completes.
Currently, all buffers that are held in transactions (XFS_BLI_HOLD)
with deferred operations are explicitly joined to the dfops. This is
not the case for inodes, however, as various contexts defer
operations to transactions with held inodes without explicit joins
to the associated dfops (and thus not relogging).
While this is not a catastrophic problem, it is not ideal. Given
that we want to eventually relog such items automatically during
dfops processing, start by explicitly adding these missing
xfs_defer_ijoin() calls. A call is added everywhere an inode is
joined to a transaction without transferring lock ownership and
said transaction runs deferred operations.
All xfs_defer_ijoin() calls will eventually be replaced by automatic
dfops inode relogging. This patch essentially implements the
behavior change that would otherwise occur due to automatic inode
dfops relogging.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have a few places that already check if an inode has actual data in
the COW fork to avoid work on reflink inodes that do not actually have
outstanding COW blocks. There are a few more places that can avoid
working if doing the same check, so add a documented helper for this
condition and use it in all places where it makes sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The field is only used for asserts, and to track if we really need to do
realloc when growing the inode fork data. But the krealloc function
already performs this check internally, so there is no need to keep track
of the real allocation size.
This will free space in the inode fork for keeping a sequence counter of
changes to the extent list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the IRELE macro with a proper function so that we can do proper
typechecking and so that we can stop open-coding iput in scrub, which
means that we'll be able to ftrace inode lifetimes going through scrub
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Every caller of xfs_defer_finish() now passes the transaction and
its associated ->t_dfops. The xfs_defer_ops parameter is therefore
no longer necessary and can be removed.
Since most xfs_defer_finish() callers also have to consider
xfs_defer_cancel() on error, update the latter to also receive the
transaction for consistency. The log recovery code contains an
outlier case that cancels a dfops directly without an available
transaction. Retain an internal wrapper to support this outlier case
for the time being.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At this point, the transaction subsystem completely manages deferred
items internally such that the common and boilerplate
xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() ->
xfs_trans_commit() sequence can be replaced with a simple
transaction allocation and commit.
Remove all such boilerplate deferred ops code. In doing so, we
change each case over to use the dfops in the transaction and
specifically eliminate:
- The on-stack dfops and associated xfs_defer_init() call, as the
internal dfops is initialized on transaction allocation.
- xfs_bmap_finish() calls that precede a final xfs_trans_commit() of
a transaction.
- xfs_defer_cancel() calls in error handlers that precede a
transaction cancel.
The only deferred ops calls that remain are those that are
non-deterministic with respect to the final commit of the associated
transaction or are open-coded due to special handling.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Christoph Hellwig
Brian Foster
Kaixu Xia
Dave Chinner
Darrick J. Wong
YueHaibing
kaixuxia
Tetsuo Handa
Eric Sandeen
Colin Ian King