Function its_alloc_tables() maintains two local variables, "order" and
and "alloc_size", to hold memory size that has been allocated to
ITS_BASEn. We don't always refresh the variable alloc_size whenever
value of the variable order changes, causing the following two
problems.
- Cache flush operation with size more than required.
- Information reported by pr_info is not correct.
Use a helper macro that converts page order to size in bytes instead of
variable "alloc_size" to fix both the problems.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When the GIC is using EOImode==1, the EOI is done immediately,
leaving the deactivation to be performed when the EOI was
previously done.
Unfortunately, the ITS is not aware of the EOImode at all, and
blindly EOIs the interrupt again. On most systems, this is ignored
(despite being a programming error), but some others do raise a
SError exception as there is no priority drop to perform for this
interrupt.
The fix is to stop trying to be clever, and always call into the
underlying GIC to perform the right access, irrespective of the
more we're in.
[Marc: Reworked commit message]
Fixes: 0b996fd359 ("irqchip/GICv3: Convert to EOImode == 1")
Cc: stable@vger.kernel.org
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
EOImode1 is only used for the root controller and hence only the root
controller uses the eoimode1 functions for handling interrupts. However,
if the root controller supports EOImode1, then the EOImodeNS bit will be
set for all GICs, enabling EOImode1. This is not what we want and this
causes interrupts on non-root GICs to only be dropped in priority but
never deactivated. Therefore, only set the EOImodeNS bit for the root
controller.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Setting the affinity of an IRQ, it only applicable for the root
interrupt controller and so only populate this operator for the root
controller.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The current ITS driver has a memory leak in its_free_tables(). It
happens on tear down path of the driver when its_probe() call fails.
its_free_tables() should free the exact number of pages that have
been allocated, not just a single page as current code does.
This patch records the memory size for each ITS_BASERn at the time of
page allocation and uses the same size information when freeing pages
to fix the issue.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Vikram Sethi <vikrams@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1454379584-21772-1-git-send-email-shankerd@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The Allwinner sunxi specific interrupt controller cannot be compiled
for any architecture except arm:
drivers/irqchip/irq-sun4i.c:25:26: fatal error: asm/mach/irq.h: No such file or directory
compilation terminated.
It turns out that this header is actually not needed for the driver, so remove
it and allow compilation for other architectures like arm64.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-sunxi@googlegroups.com
Link: http://lkml.kernel.org/r/1454348370-3816-2-git-send-email-andre.przywara@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull IRQ fixes from Ingo Molnar:
"Mostly irqchip driver fixes, but also an irq core crash fix and a
build fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mxs: Add missing set_handle_irq()
irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
irqchip/gic-v3-its: Recompute the number of pages on page size change
base: Export platform_msi_domain_[alloc,free]_irqs
of: MSI: Simplify irqdomain lookup
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token
irqchip: Fix dependencies for archs w/o HAS_IOMEM
irqchip/s3c24xx: Mark init_eint as __maybe_unused
genirq: Validate action before dereferencing it in handle_irq_event_percpu()
Atmel AIC has common structure for SMR (Source Mode Register).
bit[6:5] Interrupt source type
bit[2:0] Priority level
Other bits are unused.
To update new priority value, bit[2:0] should be cleared first and then
new priority level can be written. However, aic_common_set_priority()
helper clears source type bits instead of priority bits.
This patch fixes wrong mask bit operation.
Fixes: b1479ebb77 "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers"
Signed-off-by: Milo Kim <milo.kim@ti.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Nicholas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org #v3.17+
Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the programming of a GITS_BASERn register fails because of
an unsupported ITS page size, we retry it with a smaller page size.
Unfortunately, we don't recompute the number of allocated ITS pages,
indicating the wrong value computed in the original allocation.
A convenient fix is to free the pages we allocated, update the
page size, and restart the allocation. This will ensure that
we always allocate the right amount in the case of a device
table, specially if we have to reduce the allocation order
to stay within the boundaries of the ITS maximum allocation.
Reported-and-tested-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The init_eint array in the s3c24xx irqchip driver is used by
every individual chip variant, but Kconfig allows building
the driver when they are all disabled, and that leads to
a harmless compile-time warning:
drivers/irqchip/irq-s3c24xx.c:608:28: error: 'init_eint' defined but not used [-Werror=unused-variable]
This marks the array as __maybe_unused to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1453737499-1960073-1-git-send-email-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.
The executive summary:
- ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
- Avoid useless rebuilds for zboot.
- jz4780: Add NEMC, BCH and NAND device tree nodes
- Initial support for the MicroChip's DT platform. As all the device
drivers are missing this is still of limited use.
- Some Loongson3 cleanups.
- The unavoidable whitespace polishing.
- Reduce clock skew when synchronizing the CPU cycle counters on CPU
startup.
- Add MIPS R6 fixes.
- Lots of cleanups across arch/mips as fallout from KVM.
- Lots of minor fixes and changes for IEEE 754-2008 support to the
FPU emulator / fp-assist software.
- Minor Ralink, BCM47xx and bcm963xx platform support improvments.
- Support SMP on BCM63168"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
MIPS: zboot: Add support for serial debug using the PROM
MIPS: zboot: Avoid useless rebuilds
MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
MIPS: bcm963xx: Update bcm_tag field image_sequence
MIPS: bcm963xx: Move extended flash address to bcm_tag header file
MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
MIPS: bcm63xx: nvram: Use nvram structure definition from header file
MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
MAINTAINERS: Add KVM for MIPS entry
MIPS: KVM: Add missing newline to kvm_err()
MIPS: Move KVM specific opcodes into asm/inst.h
MIPS: KVM: Use cacheops.h definitions
MIPS: Break down cacheops.h definitions
MIPS: Use EXCCODE_ constants with set_except_vector()
MIPS: Update trap codes
MIPS: Move Cause.ExcCode trap codes to mipsregs.h
MIPS: KVM: Make kvm_mips_{init,exit}() static
MIPS: KVM: Refactor added offsetof()s
MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
...
This adds support for the interrupt controller present on PIC32 class
devices. It handles all internal and external interrupts. This controller
exists outside of the CPU core and is the arbitrator of all interrupts
(including interrupts from the CPU itself) before they are presented to
the CPU.
The following features are supported:
- DT properties for EVIC and for devices/peripherals that use interrupt lines
- Persistent and non-persistent interrupt handling
- irqdomain and generic chip support
- Configuration of external interrupt edge polarity
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12092/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This branch is the culmination of 5 years of effort to bring the ARMv6
and ARMv7 platforms together such that they can all be enabled and
boot the same kernel. It has been a tremendous amount of cleanup and
refactoring by a huge number of people, and creation of several new
(and major) subsystems to better abstract out all the platform details
in an appropriate manner.
The bulk of this branch is a large patchset from Arnd that brings several
of the more minor and older platforms we have closer to multiplatform
support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview
Much of this is moving around header files from old mach directories,
but there are also some cleanup patches of debug_ll (lowlevel debug
per-platform options) and other parts.
Linus Walleij also has some patchs to clean up the older ARM Realview
platforms by finally introducing DT support, and Rob Herring has some
for ARM Versatile which is now DT-only. Both of these platforms are
now multiplatform.
Finally, a couple of patches from Russell for Dove PMU, and a fix from
Valentin Rothberg for Exynos ADC, which were rebased on top of the
series to avoid conflicts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z1AW
-----END PGP SIGNATURE-----
Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform code updates from Arnd Bergmann:
"This branch is the culmination of 5 years of effort to bring the ARMv6
and ARMv7 platforms together such that they can all be enabled and
boot the same kernel. It has been a tremendous amount of cleanup and
refactoring by a huge number of people, and creation of several new
(and major) subsystems to better abstract out all the platform details
in an appropriate manner.
The bulk of this branch is a large patchset from Arnd that brings
several of the more minor and older platforms we have closer to
multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0
and realview Much of this is moving around header files from old mach
directories, but there are also some cleanup patches of debug_ll
(lowlevel debug per-platform options) and other parts.
Linus Walleij also has some patchs to clean up the older ARM Realview
platforms by finally introducing DT support, and Rob Herring has some
for ARM Versatile which is now DT-only. Both of these platforms are
now multiplatform.
Finally, a couple of patches from Russell for Dove PMU, and a fix from
Valentin Rothberg for Exynos ADC, which were rebased on top of the
series to avoid conflicts"
* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
ARM: realview: don't select SMP_ON_UP for UP builds
ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
ARM: s3c64xx: fix pm-debug compilation
iio: exynos-adc: fix irqf_oneshot.cocci warnings
ARM: realview: build realview-dt SMP support only when used
ARM: realview: select apropriate targets
ARM: realview: clean up header files
ARM: realview: make all header files local
ARM: no longer make CPU targets visible separately
ARM: integrator: use explicit core module options
ARM: realview: enable multiplatform
ARM: make default platform work for NOMMU
ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
ARM: defconfig: use correct debug_ll settings
ARM: versatile: convert to multi-platform
ARM: versatile: merge mach code into a single file
ARM: versatile: switch to DT only booting and remove legacy code
ARM: versatile: add DT based PCI detection
ARM: pxa: mark ezx structures as __maybe_unused
ARM: pxa: mark raumfeld init functions as __maybe_unused
...
Commit 13ae42a3b1c1 ("h8300: Rename ctlr_out/in[bwl] to
raw_read/write[bwl]") changed the function names, but not all callers,
resulting in
drivers/irqchip/irq-renesas-h8s.c: In function ‘h8s_disable_irq’:
drivers/irqchip/irq-renesas-h8s.c:43:9: error:
implicit declaration of function ‘ctrl_inw’
drivers/irqchip/irq-renesas-h8s.c:44:2: error:
implicit declaration of function ‘ctrl_outw’
Fixes: 13ae42a3b1c1 ("h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]")
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull irq updates from Thomas Gleixner:
"The irq department provides:
- Support for MSI to wire bridges and a first user of it
- More ACPI support for ARM/GIC
- A new TS-4800 interrupt controller driver
- RCU based free of interrupt descriptors to support the upcoming
Intel VMD technology without introducing a locking nightmare
- The usual pile of fixes and updates to drivers and core code"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
irqchip/omap-intc: Add support for spurious irq handling
irqchip/zevio: Use irq_data_get_chip_type() helper
irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler
irqchip/ts4800: Add TS-4800 interrupt controller
irqchip/ts4800: Add documentation for TS-4800 interrupt controller
irq/platform-MSI: Increase the maximum MSIs the MSI framework can support
irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges
irqchip/bcm2836: Make code more readable
irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR
irqchip/bcm2836: Add SMP support for the 2836
irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers
irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support
irqchip/gic-v2m: Refactor to prepare for ACPI support
irqdomain: Introduce is_fwnode_irqchip helper
acpi: pci: Setup MSI domain for ACPI based pci devices
genirq/msi: Export functions to allow MSI domains in modules
irqchip/mbigen: Implement the mbigen irq chip operation functions
irqchip/mbigen: Create irq domain for each mbigen device
irqchip/mgigen: Add platform device driver for mbigen device
dt-bindings: Documents the mbigen bindings
...
Pull timer updates - and a leftover fix - from Thomas Gleixner:
"A rather large (commit wise) update from the timer side:
- A bulk update to make compile tests work in the clocksource drivers
- An overhaul of the h8300 timers
- Some more Y2038 work
- A few overflow prevention checks in the timekeeping/ntp code
- The usual pile of fixes and improvements to the various
clocksource/clockevent drivers and core code"
Also:
"A single fix for the posix-clock poll code which did not make it into
4.4"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
clocksource/drivers/acpi_pm: Convert to pr_* macros
clocksource: Make clocksource validation work for all clocksources
timekeeping: Cap adjustments so they don't exceed the maxadj value
ntp: Fix second_overflow's input parameter type to be 64bits
ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds
timekeeping: Provide internal function __ktime_get_real_seconds
clocksource/drivers/h8300: Use ioread / iowrite
clocksource/drivers/h8300: Initializer cleanup.
clocksource/drivers/h8300: Simplify delta handling
clocksource/drivers/h8300: Fix timer not overflow case
clocksource/drivers/h8300: Change to overflow interrupt
clocksource/drivers/lpc32: Correct pr_err() output format
clocksource/drivers/arm_global_timer: Fix suspend resume
clocksource/drivers/pistachio: Fix wrong calculated clocksource read value
clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set
clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel
clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path
clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
clocksource/drivers/h8300: Increase the compilation test coverage
...
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-clock: Fix return code on the poll method's error path
Under some conditions, irq sorting procedure used by INTC can go wrong
resulting in a spurious irq getting reported.
If this condition is not handled, it results in endless stream of:
unexpected IRQ trap at vector 00
messages from ack_bad_irq()
Handle the spurious interrupt condition in omap-intc driver to prevent this.
Measurements using kernel function profiler on AM335x EVM running at 720MHz
show that after this patch omap_intc_handle_irq() takes about 37.4us against
34us before this patch.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some OMAP interrupt controllers use generic level detection, so
handle_level_irq() is used as the chip type handler.
Allocated IRQ chip type handler doesn't need to set it again because
irq_alloc_domain_generic_chips() has already registered it.
Tested with BeagleBoneBlack Rev C.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-omap@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1450687994-12580-1-git-send-email-milo.kim@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit adds support for the TS-4800 interrupt controller. This
controller is instantiated in a companion FPGA, and multiplex interrupts
for other FPGA IPs.
As this component is external to the SoC, the SoC might need to reserve
pins, so this controller is implemented as a platform driver and doesn't
use the IRQCHIP_DECLARE construct.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: kernel@savoirfairelinux.com
Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch contain fixes for v2m resources and SPI ranges:
* Fix off-by-one error when set up v2m resource end range in
gicv2m_acpi_init().
* Fix the off-by-one print error for SPI range.
* Use %pR to properly print resource range information.
Both ACPI and DT should now print:
GICv2m: range[mem 0xe1180000-0xe1180fff], SPI[64:319]
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: <hanjun.guo@linaro.org>
Cc: <tomasz.nowicki@linaro.org>
Cc: <graeme.gregory@linaro.org>
Cc: <dhdang@apm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <marc.zyngier@arm.com>
Cc: <jason@lakedaemon.net>
Cc: <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/1450830263-28914-1-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Avoid using hardcoded magics. We have a #define for this number.
No functional changes.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-5-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On my RPi2 I got a lot of:
unexpected IRQ trap at vector 00
This happens because bcm2836_arm_irqchip_handle_irq() is sometimes
invoked even if the ISR is clear, and this case is not handled.
This patch explicitly handle this case, fixing the kernel complaints
about the bad IRQ lookup.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-4-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The firmware sets the secondaries spinning waiting for a non-NULL
value to show up in the last IPI mailbox.
The original SMP port from the downstream tree was done by Andrea, and
Eric cleaned it up/rewrote it a few times from there.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-3-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The irqchip's register area includes the the setup for the timer's
scaling factors, and for the platform we want a fixed configuration of
these registers.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-rpi-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1451166444-11044-2-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch introduces gicv2m_acpi_init(), which uses information
in MADT GIC MSI frames structure to initialize GICv2m driver.
It also exposes gicv2m_init() function, which simplifies callers
to a single GICv2m init function.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Duc Dang <dhdang@apm.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch replaces the struct device_node with struct fwnode_handle
since this structure is common between DT and ACPI.
It also refactors gicv2m_init_one() to prepare for ACPI support.
The only functional change is removing the node name from pr_info.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Since there will be several places checking if fwnode.type
is equal FWNODE_IRQCHIP, this patch adds a convenient function
for this purpose.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Pull the GIC related updates from Marc Zyngier:
"Not a lot this time (what a relief!), but an interesting series from
Linus Walleij coming out of his work converting the ARM RealView
platforms to DT, and a couple of mundane fixes."
Add the interrupt controller chip operation functions of mbigen chip.
Signed-off-by: Ma Jun <majun258@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For peripheral devices which connect to mbigen,mbigen is a interrupt
controller. So, we create irq domain for each mbigen device and add
mbigen irq domain into irq hierarchy structure.
Signed-off-by: Ma Jun <majun258@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Mbigen means Message Based Interrupt Generator(MBIGEN).
Its a kind of interrupt controller that collects
the interrupts from external devices and generate msi interrupt.
Mbigen is applied to reduce the number of wire connected interrupts.
As the peripherals increasing, the interrupts lines needed is
increasing much, especially on the Arm64 server SOC.
Therefore, the interrupt pin in GIC is not enough to cover so
many peripherals.
Mbigen is designed to fix this problem.
Mbigen chip locates in ITS or outside of ITS.
Mbigen chip hardware structure shows as below:
mbigen chip
|---------------------|-------------------|
mgn_node0 mgn_node1 mgn_node2
| |-------| |-------|------|
dev1 dev1 dev2 dev1 dev3 dev4
Each mbigen chip contains several mbigen nodes.
External devices can connect to mbigen node through wire connecting way.
Because a mbigen node only can support 128 interrupt maximum, depends
on the interrupt lines number of devices, a device can connects to one
more mbigen nodes.
Also, several different devices can connect to a same mbigen node.
When devices triggered interrupt,mbigen chip detects and collects
the interrupts and generates the MBI interrupts by writing the ITS
Translator register.
To simplify mbigen driver,I used a new conception--mbigen device.
Each mbigen device is initialized as a platform device.
Mbigen device presents the parts(register, pin definition etc.) in
mbigen chip corresponding to a peripheral device.
So from software view, the structure likes below
mbigen chip
|---------------------|-----------------|
mbigen device1 mbigen device2 mbigen device3
| | |
dev1 dev2 dev3
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There is currently a hack in the GIC driver making it possible
to pass the number of GIC instances from the platform-specific
include files and thus override the variable MAX_GIC_NR.
With multiplatform deployments, this will not work as we need
to get rid of the platform-specific include files.
It turns out that this feature is only used by the RealView
platform which has a cascaded GIC. So move the configuration
to Kconfig and bump to 2 instances if we're building for the
RealView. The include file hacks can then be removed.
Tested on the ARM PB11MPCore with its cascaded GIC.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The GIC has no such thing as interrupt 1020: the last valid ID is
1019, and the range 1020-1023 is reserved - 1023 indicating that
no interrupt is pending. So let's make sure we don't try to handle
this ID.
This bug has been in since the initial GIC code was introduced in
8ad68bbf7a ("[ARM] Add support for ARM RealView board").
Reported-by: Eric Auger <eric.auger@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On the error path, the v2m drivers drops the refcount on the parent
node instead of doing it on the node that generated the error.
Humph...
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Instead of having the irqchip being a static struct, make it part
of the per-instance data so we can assign it a dynamic name. This
has the usable side effect of displaying the GIC with an instance
number as GIC0, GIC1 ... GICn in /proc/interrupts, which is helpful
when debugging cascaded GICs, such as on the ARM PB11MPCore.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The ARM RealView PB11MPCore reference design has some special
bits in a system controller register to set up the GIC in one
of three modes: legacy, new with DCC, new without DCC. The
register is also used to enable FIQ.
Since the platform will not boot unless this register is set
up to "new with DCC" mode, we need a special quirk to be
compiled-in for the RealView platforms.
If we find the right compatible string on the GIC TestChip,
we enable this quirk by looking up the system controller and
enabling the special bits.
We depend on the CONFIG_REALVIEW_DT Kconfig symbol as the old
boardfile code has the same fix hardcoded, and this is only
needed for the attempts to modernize the RealView code using
device tree.
After fixing this, the PB11MPCore boots with device tree
only.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the sake of consistency, let rename all ctrl_out/in calls to the write/read
calls so we have the same API consistent with the other architectures hence
open the door for the increasing of the test compilation coverage.
The unsigned long coercive cast is removed because all variables are set to
the right type "void __iomem *".
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The A80 moves the NMI controller into the PRCM address space, and also
rearranges the registers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lkml.kernel.org/r/1449130813-22400-4-git-send-email-wens@csie.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This patch is specifically for PCI support on the Versatile PB board using
a DT. Currently, the dynamic IRQ mapping is broken when using DTs. For
example, on QEMU, the SCSI driver is unable to request the IRQ. To fix
this issue, this patch replaces the current dynamic mechanism with a
static value as is done in the non-DT case.
Signed-off-by: Guillaume Delbergue <guillaume.delbergue@greensocs.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
If the Renesas External IRQ Pin driver cannot find a functional clock,
it prints a warning, .e.g.
renesas_intc_irqpin fe78001c.interrupt-controller: unable to get clock
and continues, as the clock is optional, depending on the SoC type.
This warning may confuse users.
To fix this, add a flag to indicate that the clock is mandatory or
optional, and add a few more compatible entries:
- If the clock is mandatory (on R-Mobile A1 or SH-Mobile AG5), a
missing clock is now treated as a fatal error,
- If the clock is optional (on R-Car Gen1, or using the generic
"renesas,intc-irqpin" compatible value), the warning is no longer
printed.
This requires making struct intc_irqpin_irlm_config more generic by
renaming it to intc_irqpin_config, and adding a flag to indicate if IRLM
is needed.
The new clock flag is merged with the existing shared_irqs boolean into
a bitfield to save space.
Suggested-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/1448377693-19597-1-git-send-email-geert+renesas@glider.be
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
intc_irqpin_priv.number_of_irqs is used inside intc_irqpin_probe() only,
so it can just become a local variable.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1448376581-9202-3-git-send-email-geert+renesas@glider.be
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Since commit 4baadb9e05 ("ARM: shmobile: r8a7778: remove obsolete
setup code"), all Renesas SoCs with a renesas-intc-irqpin module are
only supported in generic DT-only ARM multi-platform builds. The driver
doesn't need to use platform data anymore, hence remove platform data
configuration.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1448376581-9202-2-git-send-email-geert+renesas@glider.be
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
When using EOImode==1, we may mark interrupts as being forwarded
to a virtual machine. In that case, the interrupt is left active
while being passed to the VM.
If we suspend the system before the VM has deactivated the interrupt,
the active state will be lost (which may be very annoying, as this
may result in spurious interrupts and a confused guest).
To avoid this, save and restore the active state together with the
rest of the GIC registers.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/1447701208-18150-5-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Shanker Donthineni
Ashok Kumar
Jon Hunter
Andre Przywara
Linus Torvalds
Oleksij Rempel
Milo Kim
Marc Zyngier
Richard Weinberger
Arnd Bergmann
Cristian Birsan
Guenter Roeck
Sekhar Nori
Geliang Tang
Damien Riegel
Suravee Suthikulpanit
Andrea Merello
Eric Anholt
Thomas Gleixner
Jason Cooper
Ma Jun
Linus Walleij
Daniel Lezcano
Chen-Yu Tsai
Guillaume Delbergue
Geert Uytterhoeven