Commit Graph

321 Commits

Author SHA1 Message Date
Tony Lindgren 58a66dba1b phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
If we reload phy-twl4030-usb, we get a warning about unbalanced
pm_runtime_enable. Let's fix the issue and also fix idling of the
device on unload before we attempt to shut it down.

If we don't properly idle the PHY before shutting it down on removal,
the twl4030 ends up consuming about 62mW of extra power compared to
running idle with the module loaded.

Cc: stable@vger.kernel.org
Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-02-10 11:46:01 +05:30
Tony Lindgren b241d31ef2 phy: twl4030-usb: Relase usb phy on unload
Otherwise rmmod omap2430; rmmod phy-twl4030-usb; modprobe omap2430
will try to use a non-existing phy and oops:

Unable to handle kernel paging request at virtual address b6f7c1f0
...
[<c048a284>] (devm_usb_get_phy_by_node) from [<bf0758ac>]
(omap2430_musb_init+0x44/0x2b4 [omap2430])
[<bf0758ac>] (omap2430_musb_init [omap2430]) from [<bf055ec0>]
(musb_init_controller+0x194/0x878 [musb_hdrc])

Cc: stable@vger.kernel.org
Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-02-10 11:46:00 +05:30
Shawn Lin b82fcabe21 phy: core: fix wrong err handle for phy_power_on
If phy_pm_runtime_get_sync failed but we already
enable regulator, current code return directly without
doing regulator_disable. This patch fix this problem
and cleanup err handle of phy_power_on to be more readable.

Fixes: 3be88125d8 ("phy: core: Support regulator ...")
Cc: <stable@vger.kernel.org> # v3.18+
Cc: Roger Quadros <rogerq@ti.com>
Cc: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-02-10 11:45:41 +05:30
Geert Uytterhoeven d896910f38 phy: Restrict phy-hi6220-usb to HiSilicon arm64
The HiSilicon Hi6220 USB PHY is available in HiSilicon Hi6220 SoCs only.
Restrict it to HiSilicon arm64, unless compile-testing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-02-03 11:55:28 +05:30
Greg Kroah-Hartman daf273350d phy: for 4.5
*) new PHY driver for hi6220 usb and rcar gen3 usb2
 *) deprecate phy-omap-control driver. phy-omap-control driver was added
    when there was no proper infrastructure for doing control module
    initialization. The phy-omap-control driver is not an 'actual' PHY
    driver and it was just a hack to do PHY related control module
    initialization. Now with SYSCON framework in the kernel, control
    module setttings can be done using APIs provided by syscon.
 *) usbphy-internal pll creates the needed 480MHz and is also a
    supply-clock back to the core clock-controller in Rockchip SoCs.
    This is now modeled as a real clock.
 *) calibrate mt65xx usb3 PHY for better eye diagram and receiver
    sensitivity.
 *) Miscellaneous cleanups.
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJWeR+CAAoJEA5ceFyATYLZG8QP/jlux4ejRKhaO/BYd2gSEOij
 H6CO+3O+oQqgKHdDvgGrE5vAqRfxBZI9UErOEBUcPOY+Qdp0s5Wg657WuJR1sSDK
 iNwho1AS2ZuQHqxVDaDToBCTIwliDVkT0+eIgq5tGZaHBh0/iOUEzjnODcaR36a/
 VFPPTTFmkeX9Y0qzyWx/eVASBNguKo6/8/h9PV0zIFkunaE28rDvR2F9x4QSfBaV
 737iivHmVxe+/dQ3EwLymrVu1LMwporEqctWUFzUVHsSZfJH7lCErzCs5qPNCoOw
 OqqHJXmk+FtYix3GMj+sGSD3qR83ml031EeCxpmHQ4OVNfTTIodF/po9K9NRkM8K
 4rA9EkV5xjgWZFw/38ANvozcUXDbVOKMqhwMAH8hLWvIDzO4HfPY/hpRpXzTc+vo
 c7QowH+SP/8lXWGEVvFNjDWaowC7ajkAq94RFXQLTucySP9jgaDDD9nK2onMPD2S
 Z2t7QXgdu9zuLziWeigriSIsjQIJ7gCfAHpUAaeX9VDocgzTqOoweYFTQuU89S9S
 FrfE/B3k+ZI+RDwvsbAShzmMxoYSpct5fhwjA+6D0L1v7piU0GSAT5wMGYFumC32
 BQWi41I2o5ory3rOOfzFa5GUxBEG8dJNjIgJKvcMT/2QH0zinY6c03a1wN+V7iRV
 i1YqBUUvHCEnbsNHrxmN
 =Bu7H
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.5

*) new PHY driver for hi6220 usb and rcar gen3 usb2
*) deprecate phy-omap-control driver. phy-omap-control driver was added
   when there was no proper infrastructure for doing control module
   initialization. The phy-omap-control driver is not an 'actual' PHY
   driver and it was just a hack to do PHY related control module
   initialization. Now with SYSCON framework in the kernel, control
   module setttings can be done using APIs provided by syscon.
*) usbphy-internal pll creates the needed 480MHz and is also a
   supply-clock back to the core clock-controller in Rockchip SoCs.
   This is now modeled as a real clock.
*) calibrate mt65xx usb3 PHY for better eye diagram and receiver
   sensitivity.
*) Miscellaneous cleanups.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-26 17:01:18 -08:00
Greg Kroah-Hartman 87cf5586fd usb: patches for v4.5
A ton of improvements to dwc2 have been made. The
 driver should be a lot more stable on v4.5 then ever
 before.
 
 Our good old dwc3 got a few cleanups and misc fixes
 and also added support to Xilinx's integration of
 this IP.
 
 Yoshihiro Shimoda gives us support for a new USB3
 peripheral controller from Renesas.
 
 Other than these, the usual misc fixes all over the
 place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWes7RAAoJEIaOsuA1yqREC5cP/jzIWxyHj5rNPr8VGnjzd4Wh
 wcsxGmTLHA+c5FFer0+hnj8DXSELyYV2Lcfng1pkPuGWAsPzdd9FvNV/9Q1RmqPG
 R96JB9N3dnDY7erJZkmpDOJvGg+p/Ec6GmFkrTVWQeXTwlkI1mdvaZwV9iFQfmb0
 V/gdQWdlmbTarmwPLxEpaDN+JDB9Gm6RdyK/B5pC8ZeF9S42aQIFCrfOfjP3OiZj
 o5Q6Gv2YxElSKscObLFyltfgb05YD/yO0al/wm7p0lGXdsaMMokjyxrbibnoFNic
 Z5lexn8DqJ/yjy9w5K3Tj+b4nSfokUibUB3r0Cwbv6di7g0gUNclUwg79X8tSoDS
 T2hkpmpAIvb2z80wlLFpGptfC39JoLtzAkxfBbnu025QxFeI4AknzQuXiW8UgvSO
 /t1Aq6jg3j+GTuU+BiBnLjEPBZSsh/b7qIpreaXIIb7A01e2T7QT5i8kB7Zk5d5F
 4aLBH/QHHXS+RGJmY9qgW6wee0XcaCysCUctwVuPY1fGukPrIFxjhPnJtjjqKnW7
 41RCTwv2DKmm6CV5xVXYfSMVkmWBrNlpjugZkYH9yRbAzwPA/H/A5iPJwoOnGshn
 VNuFJOBKJJFR0u072LidgMWZ7AaeBmWnageAU1sFr8iXWiWESwaAjI4ouPNVugPI
 PxYdhPlc+lHBPXDrPh8p
 =8vM4
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.5

A ton of improvements to dwc2 have been made. The
driver should be a lot more stable on v4.5 then ever
before.

Our good old dwc3 got a few cleanups and misc fixes
and also added support to Xilinx's integration of
this IP.

Yoshihiro Shimoda gives us support for a new USB3
peripheral controller from Renesas.

Other than these, the usual misc fixes all over the
place.
2015-12-26 16:56:25 -08:00
Kishon Vijay Abraham I 9955a7835b phy: omap-usb2: use *syscon* framework API to power on/off the PHY
Deprecate using phy-omap-control driver to power on/off the PHY,
and use *syscon* framework to do the same. This handles
powering on/off the PHY for the USB2 PHYs used in various TI SoCs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-21 14:26:28 +05:30
Kishon Vijay Abraham I 86c574e4bc phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe
No functional change. Previously omap_control_phy_power() was used to power
off the PHY during probe. But once phy-omap-usb2 driver is adapted to
use syscon, omap_control_phy_power() cannot be used. Hence used
omap_usb_power_off to power off the PHY.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
2015-12-21 14:26:28 +05:30
Kishon Vijay Abraham I 3f2362c56f phy: ti-pipe3: use *syscon* framework API to set PCS value of the PHY
Deprecate using phy-omap-control driver to set PCS value of the PHY
and start using *syscon* API to do the same.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
2015-12-21 14:26:27 +05:30
Kishon Vijay Abraham I c396a1c7ee phy: ti-pipe3: use *syscon* framework API to power on/off the PHY
Deprecate using phy-omap-control driver to power on/off the PHY and
use *syscon* framework to do the same.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
2015-12-21 14:26:27 +05:30
Kishon Vijay Abraham I cc34ace73d phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe
No functional change. Previously omap_control_phy_power() was used to power
off the PHY during probe. But once PIPE3 driver is adapted to use syscon,
omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off
to power off the PHY.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
2015-12-21 14:26:27 +05:30
Kishon Vijay Abraham I 1fe521225a phy: ti-pipe3: move mem resource initialization to a separate function
No functional change. Moved mem resource initialization done in
probe to a separate function as part of cleaning up
ti_pipe3_probe.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-21 14:26:27 +05:30
Kishon Vijay Abraham I 73bbc78e57 phy: ti-pipe3: move sysctrl initialization to a separate function
No functional change. Moved sysctrl initialization done in probe to a
separate function as part of cleaning up ti_pipe3_probe.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-21 14:26:27 +05:30
Kishon Vijay Abraham I 234738ea33 phy: ti-pipe3: move clk initialization to a separate function
No functional change. Moved clock initialization done in probe to a
separate function as part of cleaning up ti_pipe3_probe.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-21 14:26:27 +05:30
Kishon Vijay Abraham I d65ff52eb8 phy: ti-pipe3: introduce local struct device* in probe
No functional change. Introduce local struct device pointer in
probe and replace using &pdev->dev/phy->dev with the local
device pointer. This is in preparation to split ti_pipe3_probe
and add separate functions for getting mem resource, getting
sysctrl and getting clocks.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-21 14:26:27 +05:30
Jisheng Zhang c3ab642f2f phy: berlin-usb: don't set device's driver_data
After commit 739ae3452d ("phy: berlin-usb: Set drvdata for phy and
use it"), we get the address of priv by phy_get_drvdata(), so there's
no need to set device's driver_data any more. This patch removes the
call of platform_set_drvdata().

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 17:43:12 +05:30
Jisheng Zhang c7a0b20ed4 phy: berlin-usb: remove non-necessary header files
We don't need gpio related header files, so remove them.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 17:43:12 +05:30
Jaedon Shin c1602a1a0f phy: phy_brcmstb_sata: add support for MIPS-based platforms
The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.

This new compatible string, "brcm,bcm7425-sata-phy", may be used for
most MIPS-based platforms of 40nm process technology.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 17:28:33 +05:30
Jaedon Shin 810c6f169f phy: phy_brcmstb_sata: add data for phy version
Add data for phy version, and the default value of version is using the
BRCM_SATA_PHY_28NM.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 17:28:33 +05:30
Jaedon Shin 1dc3a8582c phy: phy_brcmstb_sata: remove duplicate definitions
Remove duplicate definitions.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 17:28:33 +05:30
Heiko Stuebner b74fe7c761 phy: rockchip-usb: expose the phy-internal PLLs
The USB phys on Rockchip SoCs contain their own internal PLLs to create
the 480MHz needed. Additionally this PLL output is also fed back into the
core clock-controller as possible source for clocks like the GPU or others.

Until now this was modelled incorrectly with a "virtual" factor clock in
the clock controller. The one big caveat is that if we turn off the usb phy
via the siddq signal, all analog components get turned off, including the
PLLs. It is therefore possible that a source clock gets disabled without
the clock driver ever knowing, possibly making the system hang.

Therefore register the phy-plls as real clocks that the clock driver can
then reference again normally, making the clock hirarchy finally reflect
the actual hardware.

The phy-ops get converted to simply turning that new clock on and off
which in turn controls the siddq signal of the phy.

Through this the driver gains handling for platform-specific data, to
handle the phy->clock name association.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Heiko Stuebner c2bfc3b888 phy: rockchip-usb: add compatible values for rk3066a and rk3188
We need custom handling for these two socs in the driver shortly,
so add the necessary compatible values to binding and driver.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Heiko Stuebner 97dd910109 phy: rockchip-usb: move per-phy init into a separate function
This unclutters the loop in probe a lot and makes current (and future)
error handling easier to read.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Heiko Stuebner 5fdbb97dec phy: rockchip-usb: introduce a common data-struct for the device
This introduces a common struct that holds data belonging to
the umbrella device that contains all the phys and that we
want to use later.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Heiko Stuebner 75d390fecf phy: rockchip-usb: fix clock get-put mismatch
Currently the phy driver only gets the optional clock reference but
never puts it again, neither during error handling nor on remove.
Fix that by moving the clk_put to a devm-action that gets called at
the right time when all other devm actions are done.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Zhangfei Gao 30e9a0b214 phy: add phy-hi6220-usb
Support hi6220 use phy for HiKey board

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Reinder de Haan 626a630e00 phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC
Note this commit only adds support for phys 1-3, phy 0, the otg phy, is
not yet (fully) supported after this commit.

Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Hans de Goede 68dbc2ce77 phy-sun4i-usb: Use of_match_node to get model specific config data
Use of_match_node instead of calling of_device_is_compatible a ton of
times to get model specific config data.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:38 +05:30
Chunfeng Yun 75f072f9ea phy: phy-mt65xx-usb3: improve HS eye diagram
calibrate HS slew rate and switch 100uA current to SSUSB
to improve HS eye diagram of HQA test.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:37 +05:30
Chunfeng Yun 43f53b1907 phy: phy-mt65xx-usb3: fix test fail of HS receiver sensitivity
when use the default value 8 of RG_USB20_SQTH, the HS receiver
sensitivity test of HQA will fail, set it as 2 to fix up the
issue.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:37 +05:30
Yoshihiro Shimoda 9f391c574e phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection
This patch adds support for runtime ID/VBUS pin detection if
the channel 0 of R-Car gen3 is used. So, we are able to use
the channel as both host and peripheral.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:37 +05:30
Yoshihiro Shimoda 1114e2d317 phy: rcar-gen3-usb2: change the mode to OTG on the combined channel
To use the channel 0 of R-Car gen3 as periperal mode, This patch changes
the mode to OTG instead of HOST. Then, this driver needs to set some
registers to enable host mode and detects ID pin and VBUS pin at
phy_init() timing.

For now, the channel 0 can be used as host mode only.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:37 +05:30
Yoshihiro Shimoda f3b5a8d9b5 phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver
This patch adds support for R-Car generation 3 USB2 PHY driver.
This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared
with the HSUSB (USB2.0 peripheral) device. And each channel has
independent registers about the PHYs.

So, the purpose of this driver is:
 1) initializes some registers of SoC specific to use the
    {ehci,ohci}-platform driver.

 2) detects id pin to select host or peripheral on the channel 0.

For now, this driver only supports 1) above.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:37 +05:30
Tony Lindgren 8055555fc4 usb: musb: core: Fix handling of the phy notifications
We currently can't unload omap2430 MUSB platform glue driver module and
this cause issues for fixing the MUSB code further. The reason we can't
remove omap2430 is because it uses the PHY functions and also exports the
omap_musb_mailbox function that some PHY drivers are using.

Let's fix the issue by exporting a more generic musb_mailbox function
from the MUSB core and allow platform glue layers to register phy_callback
function as needed.

And now we can now also get rid of the include/linux/musb-omap.h.

Cc: Bin Liu <b-liu@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: NeilBrown <neil@brown.name>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-16 10:07:28 -06:00
Chunfeng Yun 708744628b phy: core: Get a refcount to phy in devm_of_phy_get_by_index()
On driver detach, devm_phy_release() will put a refcount to
the phy, so gets a refconut to it before return.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-07 18:44:02 +05:30
Julia Lawall a8c24724dd phy: cygnus: pcie: add missing of_node_put
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.

A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 12:28:23 +05:30
Julia Lawall 39c2b96422 phy: miphy365x: add missing of_node_put
for_each_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.

A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 12:28:23 +05:30
Julia Lawall 7fd7fa43f4 phy: miphy28lp: add missing of_node_put
for_each_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.

A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 12:28:23 +05:30
Julia Lawall f6f31af81c phy: rockchip-usb: add missing of_node_put
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.

A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 12:28:23 +05:30
Julia Lawall d0ca576af2 phy: berlin-sata: add missing of_node_put
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.

A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 12:28:23 +05:30
Julia Lawall 2bb80ccda1 phy: mt65xx-usb3: add missing of_node_put
for_each_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.

A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 12:28:23 +05:30
Julia Lawall 0b25ff8697 phy: brcmstb-sata: add missing of_node_put
for_each_available_child_of_node performs an of_node_get on each iteration,
so a return from the middle of the loop requires an of_node_put.

A simplified version of the semantic patch that finds this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 12:28:23 +05:30
Arnd Bergmann 97dc5bf8d6 phy: sun9i-usb: add USB dependency
The sun9i usb phy driver calls of_usb_get_phy_mode(), which is not
available if USB is disabled:

drivers/built-in.o: In function `sun9i_usb_phy_probe':
:(.text+0x7fb0): undefined reference to `of_usb_get_phy_mode'

This adds a dependency to avoid the randconfig build errors.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9c3b443026 ("phy: Add driver to support individual USB PHYs on sun9i")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-03 11:55:41 +05:30
Linus Torvalds 3d6f47801c USB patches for 4.4-rc1
Here is the big USB patchset for 4.4-rc1.
 
 As usual, most of the changes are in the gadget subsystem, and we
 removed a host controller for a device that is no longer in existance,
 and probably never was even made public.  There is also other minor
 driver updates and new device ids, full details in the changelog.
 
 All of these have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlY6gVMACgkQMUfUDdst+ynLZgCePfhiDuwriaX7osq90HDu8JOc
 pTEAn2dBdw2VMPToUlxccR963YSfgu2A
 =mMgp
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.4-rc1.

  As usual, most of the changes are in the gadget subsystem, and we
  removed a host controller for a device that is no longer in existance,
  and probably never was even made public.  There is also other minor
  driver updates and new device ids, full details in the changelog.

  All of these have been in linux-next for a while"

* tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits)
  USB: core: Codestyle fix in urb.c
  usb: misc: usb3503: Use i2c_add_driver helper macro
  usb: host: lpc32xx: don't unregister phy device
  usb: host: lpc32xx: balance clk enable/disable on removal
  usb: host: lpc32xx: fix warnings caused by enabling unprepared clock
  uwb: drp: Use setup_timer
  uwb: neh: Use setup_timer
  uwb: rsv: Use setup_timer
  USB: qcserial: add Sierra Wireless MC74xx/EM74xx
  usb: chipidea: otg: don't wait vbus drops below BSV when starts host
  chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()
  doc: dt-binding: ci-hdrc-usb2: split vendor specific properties
  usb: chipidea: imx: add imx6ul usb support
  doc: dt-binding: ci-hdrc-usb2: improve property description
  usb: chipidea: imx: add usb support for imx7d
  Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry
  usb: chipidea: Add support for 'phy-clkgate-delay-us' property
  usb: chipidea: Use extcon framework for VBUS and ID detect
  usb: gadget: net2280: restore ep_cfg after defect7374 workaround
  usb: dwc2: host: Fix use after free w/ simultaneous irqs
  ...
2015-11-04 21:26:27 -08:00
Ingo Molnar a1a2ab2ff7 Linux 4.3-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWJCaDAAoJEHm+PkMAQRiGvJQH/jGlxawu+mnNFjIRXmk8Zucq
 cxDVTPnQ4S1DJMyRSQTqe6ccDgDM/TEISJPZ0Gwc2SQLda27zdQiz05upbqHSPSH
 /FUHMKiMRhhIBOzdfEGR4Ry2YZID+DlG5EWCgRKf/GlgY3STZSpjIBPYd3Rl3zsU
 qragNjtbCE6eUpnLwkv40Q2mzzR3/fZxJ0drgE/QiSF8P0VmvVbrcQMF58vnUQgy
 9URp48mLhmKj+IrElSnvXMG0XLrKn1tRYXGXd3w+x1Nlr//SHYsIuQHUcp6SAVQh
 p2HXLL7eoy8rs45MCiOfXG7VgNWF6HFjVMtrNUcNfgBsLCx0qFMVrKIILrGtKh0=
 =ETze
 -----END PGP SIGNATURE-----

Merge tag 'v4.3-rc6' into locking/core, to pick up fixes before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-20 10:16:46 +02:00
Greg Kroah-Hartman 539669779a phy: for 4.4
*) Add new PHY driver for Broadcom's cygnus PCIe PHY
 *) Add USB3 PHY driver for mediatek's SoCs
 *) Add VBUS regulator support for Samsung's exynos PHY
 *) Misc cleanup
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJWIa6IAAoJEA5ceFyATYLZEOwP/2NxVw/ED29m1XvuaC045jgB
 ehnh4AL1VW7GboovJ63rATKWJZjpYft+iPyq3qTXtwO61znpwzYus8xABzqvkPCU
 SIuISV7DjTArFAlmiNVhOoIykpnhskdimiCE0yEA7Cv38KchKgwdvgVti7NiAthG
 rTCokoUEj3JR5t7foMm9uV/VK25SuMOjTfbC2OIpBHQQEqNfTofsMCej5tyPCRZe
 pbZN4uNGbENquxyRfNN7kjXZgzLsXPvC2QXGB0jcTNtUpuk5JPym2dnqH6dflsE4
 Nl5Qb4zSkJ/+DcH2lFzrUNkN2E5AwEhkoi2pf+BPMFqtACdvkBtRgjWgJg/9TGwG
 XFtOG+HuDO2rVvPuQ8ToZxd2Sd/Od296by3Tqc1jIbG2oPXSz07zupjAdC/RT2dn
 K887cLhbGNgcMgTsjTPeW6J0EWkzPnF45KrFwZ1d1m66URlI00R9+fUJnEuAjoAK
 LK83+g0sV3XO/kUy3V0g6Xz07Y8M0fKRJLdjIlef5M8sG82hJa3edrOURxkApfRC
 kmGkM9ITaTPQY/TpKp4HUG7AEQ9bIOqVcBfhppdnNKa2pd4jI6kPyzV0wJEZrrQy
 +rB3giOAO+UWASOy5H9gf75E/ZRdnJAWqnxvZTJa+L0xh1CkaxrhZ+BSpwWsHaDb
 P33V6GQvLy5tYaJeeXqn
 =evaU
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.4

*) Add new PHY driver for Broadcom's cygnus PCIe PHY
*) Add USB3 PHY driver for mediatek's SoCs
*) Add VBUS regulator support for Samsung's exynos PHY
*) Misc cleanup

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-10-17 20:12:19 -07:00
Ray Jui 882fed7342 phy: cygnus: pcie: Add Cygnus PCIe PHY support
This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
on Cygnus

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-10-06 20:21:48 +05:30
Axel Lin b2dfc34c97 phy: sun4i-usb: Use devm_gpiod_get_optional for optional GPIOs
Both data->id_det_gpio and data->vbus_det_gpio are optional, so use
devm_gpiod_get_optional for them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-10-06 20:21:47 +05:30
Chunfeng Yun dc7f190fd5 phy: add usb3.0 phy driver for mt65xx SoCs
support usb3.0 phy of mt65xx SoCs

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-10-06 20:21:47 +05:30
Marek Szyprowski a007ddbaef phy: exynos-usb2: add vbus regulator support
Exynos USB2 PHY has separate power supply, which is usually provided by
VBUS regulator. This patch adds support for it. VBUS regulator is
optional, to keep compatibility with boards, which have VBUS provided
from some always-on power source.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-10-06 20:21:47 +05:30