Commit Graph

41 Commits

Author SHA1 Message Date
Alan Cox 177acf7846 kconfig: Fix malloc handling in conf tools
(and get them out of the noise in the audit work)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-11-20 12:12:47 +01:00
Arnaud Lacombe 5d09598d48 kconfig: fix new choices being skipped upon config update
Running `oldconfig' after any of the following configuration change:

either trivial addition, such as:

config A
	bool "A"

choice
	prompt "Choice ?"
	depends on A

	config CHOICE_B
		bool "Choice B"

	config CHOICE_C
		bool "Choice C"
endchoice

or more tricky change:

OLD KCONFIG                      |  NEW KCONFIG
                                 |
                                 |  config A
                                 |          bool "A"
                                 |
choice                           |  choice
        prompt "Choice ?"        |          prompt "Choice ?"
                                 |
        config CHOICE_C          |          config CHOICE_C
                bool "Choice C"  |                  bool "Choice C"
                                 |
        config CHOICE_D          |          config CHOICE_D
                bool "Choice D"  |                  bool "Choice D"
endchoice                        |
                                 |          config CHOICE_E
                                 |                  bool "Choice E"
                                 |                  depends on A
                                 |  endchoice

will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.

Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.

Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-26 11:01:56 +01:00
Arnaud Lacombe e54e692ba6 kconfig: introduce specialized printer
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.

conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-01 16:23:27 +02:00
Arnaud Lacombe 5a6f8d2bd9 kconfig: nuke LKC_DIRECT_LINK cruft
This interface is not (and has never been ?) used by any frontend, just get rid
of it.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:20 -04:00
Linus Torvalds f28b1c8aaa Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  nconf: handle comment entries within choice/endchoice
  kconfig: fix warning
  kconfig: Make expr_copy() take a const argument
  kconfig: simplify select-with-unmet-direct-dependency warning
  kconfig: add more S_INT and S_HEX consistency checks
  kconfig: fix `zconfdebug' extern declaration
  kconfig/conf: merge duplicate switch's case
  kconfig: fix typos
  kbuild/gconf: add dummy inline for bind_textdomain_codeset()
  kbuild/nconf: fix spaces damage
  kconfig: nuke second argument of conf_write_symbol()
  kconfig: do not define AUTOCONF_INCLUDED
  kconfig: the day kconfig warns about "select"-abuse has come
2011-01-10 08:28:17 -08:00
Arnaud Lacombe 1137c56b74 kconfig: simplify select-with-unmet-direct-dependency warning
This is an attempt to simplify the expressing printed by kconfig when a
symbol is selected but still has direct unmet dependency.

First, the symbol reverse dependency is split in sub-expression. Then,
each sub-expression is checked to ensure that it does not contains the
unmet dependency. This removes the false-positive symbols and fixed symbol
which already have the correct dependency. Finally, only the symbol
responsible of the "select" is printed, instead of its full dependency tree.

CC: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-21 17:59:14 +01:00
Arnaud Lacombe 579fb8e741 kconfig: fix typos
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15 14:42:11 +01:00
Andy Whitcroft 020e773f6b kconfig: sym_expand_string_value: allow for string termination when reallocing
When expanding a parameterised string we may run out of space, this
triggers a realloc.  When computing the new allocation size we do not
allow for the terminating '\0'.  Allow for this when calculating the new
length.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-01 17:06:00 -04:00
Michal Marek b1f7d6e190 Revert "kconfig: Temporarily disable dependency warnings"
This reverts commit 71ebc01, which was a 2.6.36-only stopgap solution.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-12 15:12:23 +02:00
Michal Marek 239060b93b Merge branch 'kbuild/rc-fixes' into kbuild/kconfig
We need to revert the temporary hack in 71ebc01, hence the merge.
2010-10-12 15:09:06 +02:00
Michal Marek 71ebc01d3a kconfig: Temporarily disable dependency warnings
After fixing a use-after-free bug in kconfig, a 'make defconfig' or
'make allmodconfig' fills the screen with warnings that were not
detected before. Given that we are close to the release now, disable the
warnings temporarily and deal with them after 2.6.36.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-09 23:19:07 +02:00
Michal Marek 19c29f3260 kconfig: Fix realloc usage()
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-30 22:26:39 +02:00
Arnaud Lacombe 76a540958a kconfig: add a symbol string expansion helper
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 18:19:48 -04:00
Sam Ravnborg 3643f849d7 kconfig: fix segfault when detecting recursive dependency
Following sample Kconfig generated a segfault:

config FOO
        bool
        select PERF_EVENTS if HAVE_HW_BREAKPOINT

config PERF_EVENTS
        bool

config HAVE_HW_BREAKPOINT
        bool
        depends on PERF_EVENTS

Fix by reverting back to a valid property if there was no
property on the stack of symbols.

The above pattern were seen in sh Kconfig.
A fix for the Kconfig file has been sent to the sh folks.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-15 00:32:13 +02:00
Sam Ravnborg 7cf3d73b43 kconfig: add savedefconfig
savedefconfig will save a minimal config to a file
named "defconfig".

The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.

The implementation was tested against several minimal
configs for arm which was created using brute-force.

There was one regression related to default numbers
which had their valid range further limited by another symbol.

Sample:

config FOO
	int "foo"
	default 4

config BAR
	int "bar"
	range 0 FOO

If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.

This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:32 +02:00
Sam Ravnborg c252147de6 kconfig: refactor code in symbol.c
Move logic to determine default for a choice to
a separate function.
No functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:32 +02:00
Roman Zippel d595cea624 kconfig: print more info when we see a recursive dependency
Consider following kconfig file:

config TEST1
	bool "test 1"
	depends on TEST2

config TEST2
	bool "test 2"
	depends on TEST1

Previously kconfig would report:

foo:6:error: found recursive dependency: TEST2 -> TEST1 -> TEST2

With the following patch kconfig reports:
foo:5:error: recursive dependency detected!
foo:5:  symbol TEST2 depends on TEST1
foo:1:  symbol TEST1 depends on TEST2

Note that we now report where the offending symbols are defined.
This can be a great help for complex situations involving
several files.

Patch is originally from Roman Zippel with a few adjustments by Sam.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:31 +02:00
Sam Ravnborg 59e89e3ddf kconfig: save location of config symbols
When we add a new config symbol save the file/line
so we later can refer to their location.

The information is saved as a property to a config symbol
because we may have multiple definitions of the same symbol.

This has the side-effect that a symbol always has
at least one property.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:31 +02:00
Jan Beulich 0a28c47b8d kconfig: Don't write invisible choice values
This makes it so "make oldconfig" really prompts for any choice where
options that previously weren't visible just became so. Previously one
would have to remember to go over all choice values and check whether
some that previously couldn't be selected now can be.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-08 14:38:14 +02:00
Catalin Marinas 246cf9c26b kbuild: Warn on selecting symbols with unmet direct dependencies
The "select" statement in Kconfig files allows the enabling of options
even if they have unmet direct dependencies (i.e. "depends on" expands
to "no"). Currently, the "depends on" clauses are used in calculating
the visibility but they do not affect the reverse dependencies in any
way.

The patch introduces additional tracking of the "depends on" statements
and prints a warning on selecting an option if its direct dependencies
are not met.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-02 14:53:09 +02:00
Li Zefan da6df879b9 kconfig: recalc symbol value before showing search results
A symbol's value won't be recalc-ed until we save config file or
enter the menu where the symbol sits.

So If I enable OPTIMIZE_FOR_SIZE, and search FUNCTION_GRAPH_TRACER:

  Symbol: FUNCTION_GRAPH_TRACER [=y]
  Prompt: Kernel Function Graph Tracer
    Defined at kernel/trace/Kconfig:140
    Depends on: ... [=y] && (!X86_32 [=y] || !CC_OPTIMIZE_FOR_SIZE [=y])
    ...

From the dependency it should result in FUNCTION_GRAPH_TRACER=n,
but it still shows FUNCTION_GRAPH_TRACER=y.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-03-23 12:29:07 +01:00
Andi Kleen e66f25d7d1 Improve kconfig symbol hashing
While looking for something else I noticed that the symbol
hash function used by kconfig is quite poor. It doesn't
use any of the standard hash techniques but simply
adds up the string and then uses power of two masking,
which is both known to perform poorly.

The current x86 kconfig has over 7000 symbols.

When I instrumented it showed that the minimum hash chain
length was 16 and a significant number of them was over
30.

It didn't help that the hash table size was only 256 buckets.

This patch increases the hash table size to a larger prime
and switches to a FNV32 hash. I played around with a couple of hash
functions, but that one seemed to perform best with reasonable
hash table sizes.

Increasing the hash table size even further didn't
seem like a good idea, because there are a couple of global
walks which walk the complete hash table.

I also moved the unnamed bucket to 0. It's still the longest
of all the buckets (44 entries), but hopefully it's not
often hit except for the global walk which doesn't care.

The result is a much nicer distribution:
(first column bucket length, second number of buckets with that length)

1: 3505
2: 1236
3: 294
4: 52
5: 3
47: 1		<--- this is the unnamed symbols bucket

There are still some 5+ buckets, but increasing the hash table
even more would be likely not worth it.

This also cleans up the code slightly by removing hard coded
magic numbers.

I didn't notice a big performance difference either way
on my Nehalem system, but I presume it'll help somewhat
on slower systems.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-02-02 14:33:55 +01:00
Trevor Keith 4356f48907 kbuild: add static to prototypes
Warnings found via gcc -Wmissing-prototypes.

Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:44 +02:00
Roman Zippel 5a1aa8a1af kconfig: add named choice group
As choice dependency are now fully checked, it's quite easy to add support
for named choices. This lifts the restriction that a choice value can only
appear once, although it still has to be within the same group,
but multiple choices can be joined by giving them a name.
While at it I cleaned up a little the choice type logic to simplify it a
bit.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 23:05:48 +02:00
Roman Zippel 4898117886 kconfig: fix choice dependency check
Properly check the dependency of choices as a group.
Also fix that sym_check_deps() correctly terminates the dependency loop
error check (otherwise it would continue printing the dependency chain).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 23:04:57 +02:00
Roman Zippel 587c90616a kconfig: fix select in combination with default
> The attached .config (with current -git) results in a compile
> error since it contains:
>
> CONFIG_X86=y
> # CONFIG_EMBEDDED is not set
> CONFIG_SERIO=m
> CONFIG_SERIO_I8042=y
>
> Looking at drivers/input/serio/Kconfig I simply don't get how this
> can happen.

You've hit the rather subtle rules of select vs default. What happened is
that SERIO is selected to m, but SERIO_I8042 isn't selected so the default
of y is used instead.
We already had the problem in the past that select and default don't work
well together, so this patch cleans this up and makes the rule hopefully
more straightforward. Basically now the value is calculated like this:

	(value && dependency) || select

where the value is the user choice (if available and the symbol is
visible) or default.

In this case it means SERIO and SERIO_I8042 are both set to y due to their
default and if SERIO didn't had the default, then the SERIO_I8042 value
would be limited to m due to the dependency.

I tested this patch with more 10000 random configs and above case is the
only the difference that showed up, so I hope there is nothing that
depended on the old more complex and subtle rules.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-13 22:30:09 +01:00
Roman Zippel 80daa56008 kconfig: use environment option
Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Roman Zippel 93449082e9 kconfig: environment symbol support
Add the possibility to import a value from the environment into kconfig
via the option syntax. Beside flexibility this has the advantage
providing proper dependencies.
Documented the options syntax.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Roman Zippel 7a96292335 kconfig: explicitly introduce expression list
Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Sam Ravnborg d6ee35764f kconfig: rename E_OR & friends to avoid name clash
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Sam Ravnborg 5447d34b08 kconfig: error out if recursive dependencies are found
Sample:
config FOO
	bool "This is foo"
	depends on BAR

config BAR
	bool "This is bar"
	depends on FOO

This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO

And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-05-06 09:20:10 +02:00
Karsten Wiese bfc10001b1 [PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only
Those two functions are
	void sym_set_change_count(int count)
and
	void sym_add_change_count(int count)

All write accesses to sym_change_count are replaced by calls to above
functions.

Variable and changer-functions are moved to confdata.c.  IMO thats ok, as
sym_change_count is an attribute of the .config's change state.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:48 -08:00
Roman Zippel face4374e2 kconfig: add defconfig_list/module option
This makes it possible to change two options which were hardcoded sofar.
1. Any symbol can now take the role of CONFIG_MODULES
2. The more useful option is to change the list of default file names,
   which kconfig uses to load the base configuration if .config isn't
   available.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09 07:31:30 +02:00
Roman Zippel 669bfad906 kconfig: allow loading multiple configurations
Extend conf_read_simple() so it can load multiple configurations.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09 07:31:30 +02:00
Roman Zippel 0c1822e699 kconfig: allow multiple default values per symbol
Extend struct symbol to allow storing multiple default values, which can be
used to hold multiple configurations.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09 07:31:30 +02:00
Roman Zippel c0e150acde kconfig: remove SYMBOL_{YES,MOD,NO}
The SYMBOL_{YES,MOD,NO} are not really used anymore (they were more used be
the cml1 converter), so just remove them.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-09 07:31:30 +02:00
Sam Ravnborg 2244cbd8a9 kbuild: create .kernelrelease at *config step
To enable 'make kernelrelease' earlier now create .kernelrelease when
one of the *config targets are used.
Also introduce KERNELVERSION - only user is kconfig.
KERNELVERSION was needed to display kernel version in menuconfig -
KERNELRELEASE is not valid until configuration has completed.
kconfig files modified to use KERNELVERSION.
Bug reported by: Rene Rebe <rene@exactcode.de>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-16 12:12:12 +01:00
Roman Zippel 4cf3cbe2a9 [PATCH] kconfig: allow variable argumnts for range
This allows variable arguments in the range option for int and hex config
symbols.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:53 -08:00
Roman Zippel 3f23ca2b37 [PATCH] kconfig: fix restart for choice symbols
The restart check whether new symbols became visible, didn't always work for
choice symbols.  Even if a choice symbol itself isn't changable, the childs
are.  This also requires to update the new status of all choice values, once
one of them is set.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:53 -08:00
David Gibson 3f04e7ddf4 [PATCH] kconfig: Fix Kconfig performance bug
When doing its recursive dependency check, scripts/kconfig/conf uses the flag
SYMBOL_CHECK_DONE to avoid rechecking a symbol it has already checked.
However, that flag is only set at the top level, so if a symbol is first
encountered as a dependency of another symbol it will be rechecked every time
it is encountered until it's encountered at the top level.

This patch adjusts the flag setting so that each symbol will only be checked
once, regardless of whether it is first encountered at the top level, or while
recursing down from another symbol.  On complex configurations, this vastly
speeds up scripts/kconfig/conf.  The config in the powerpc merge tree is
particularly bad: this patch reduces the time for 'scripts/kconfig/conf -o
arch/powerpc/Kconfig' by a factor of 40 on a G5.  That's even including the
time to print the config, so the speedup in the actual checking is more likely
2 or 3 orders of magnitude.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:53 -08:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00