Commit Graph

148 Commits

Author SHA1 Message Date
Len Brown 6886fee4d7 tools/power turbostat: remove obsolete -M, -m, -C, -c options
The new --add option has replaced the -M, -m, -C, -c options
Eg.

-M 0x10 is now --add msr0x10,raw
-m 0x10 is now --add msr0x10,raw,u32
-C 0x10 is now --add msr0x10,delta
-c 0x10 is now --add msr0x10,delta,u32

The --add option can be repeated to add any number of counters,
while the previous options were limited to adding one of each type.

In addition, the --add option can accept a column label,
and can also display a counter as a percentage of elapsed cycles.

Eg. --add msr0x3fe,core,percent,MY_CC3

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-24 15:38:09 -05:00
Len Brown 388e9c8134 tools/power turbostat: Make extensible via the --add parameter
Create the "--add" parameter.  This can be used to teach an existing
turbostat binary about any number of any type of counter.

turbostat(8) details the syntax for --add.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-24 15:16:10 -05:00
Len Brown 7268d407ad tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz
This changes only the TSC frequency decoding line seen with --debug

old: TSC: 1382 MHz (19200000 Hz * 216 / 3 / 1000000)
new: TSC: 1800 MHz (25000000 Hz * 216 / 3 / 1000000)

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 23:18:26 -05:00
Len Brown 5cc6323c79 tools/power turbostat: line up headers when -M is used
The -M option adds an 18-column item, and the header
needs to be wide enough to keep the header aligned
with the columns.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 21:14:38 -05:00
Len Brown d8ebb44226 tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding
SKX has fewer package C-states than previous generations,
and so the decoding of PKG_CSTATE_LIMIT has changed.

This changes the line ending with pkg-cstate-limit=XXX: pcYYY

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 20:27:46 -05:00
Len Brown 005c82d64d tools/power turbostat: Support Knights Mill (KNM)
Original-author: Piotr Luc <piotr.luc@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:35:38 -05:00
Srinivas Pandruvada ddadb8adea tools/power turbostat: Display HWP OOB status
Display if the HWP is enabled in OOB (Out of band) mode.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:20 -05:00
Xiaolong Wang 5bbac26eae tools/power turbostat: fix Denverton BCLK
Add Denverton to the group of SandyBridge and later processors,
to let the bclk be recognized as 100MHz rather than 133MHz,
then avoid the wrong value of the frequencies based on it,
including Bzy_MHz, max efficiency freuency, base frequency,
and turbo mode frequencies.

Signed-off-by: Xiaolong Wang <xiaolong.wang@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:19 -05:00
Len Brown 869ce69e1e tools/power turbostat: use intel-family.h model strings
All except for model 1F, a Nehalem, which is currently incorrectly
indentified as a Westmere in that new header.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:19 -05:00
Jacob Pan 0f64490978 tools/power/turbostat: Add Denverton RAPL support
The Denverton CPU RAPL supports package, core, and DRAM domains.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:18 -05:00
Jacob Pan 2c48c990ea tools/power/turbostat: Add Denverton support
Denverton is an Atom based micro server which shares the same
Goldmont architecture as Broxton. The available C-states on
Denverton is a subset of Broxton with only C1, C1e, and C6.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:18 -05:00
Jacob Pan 9148494c59 tools/power/turbostat: split core MSR support into status + limit
Some CPUs may not have PP0/Core domain power limit MSRs. We
should still allow its domain energy status to be used. This
patch splits PP0/Core RAPL into two separate flags for power
limit and energy status such that energy status can continue
to be reported without power limit.

Without this patch, turbostat will not be able to use the
remaining RAPL features if some PL MSRs are not present.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:17 -05:00
Colin Ian King 0a91e55152 tools/power turbostat: fix error case overflow read of slm_freq_table[]
When i >= SLM_BCLK_FREQS, the frequency read from the slm_freq_table
is off the end of the array because msr is set to 3 rather than the
actual array index i.  Set i to 3 rather than msr to fix this.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:17 -05:00
Mika Westerberg 01a67adfc5 tools/power turbostat: Allocate correct amount of fd and irq entries
The tool uses topo.max_cpu_num to determine number of entries needed for
fd_percpu[] and irqs_per_cpu[]. For example on a system with 4 CPUs
topo.max_cpu_num is 3 so we get too small array for holding per-CPU items.

Fix this to use right number of entries, which is topo.max_cpu_num + 1.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:16 -05:00
Len Brown 3d109de23c tools/power turbostat: switch to tab delimited output
Switch to tab-delimited output from fixed-width columns
to make it simpler to import into spreadsheets.

As the fixed width columnns were 8-spaces wide,
the output on the screen should not change.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:16 -05:00
Len Brown ba3dec99fc tools/power turbostat: Gracefully handle ACPI S3
turbostat gives valid results across suspend to idle, aka freeze,
whether invoked in  interval mode, or in command mode.
Indeed, this can be used to measure suspend to idle:

turbostat echo freeze > /sys/power/state

But this does not work across suspend to ACPI S3, because the
processor counters, including the TSC, are reset on resume.
Further, when turbostat detects a problem, it does't forgive
the hardware, and interval mode will print *'s from there on out.

Instead, upon detecting counters going backwards, simply
reset and start over.

Interval mode across ACPI S3: (observe TSC going backwards)

root@sharkbay:/home/lenb/turbostat-src# ./turbostat -M 0x10
     CPU Avg_MHz   Busy% Bzy_MHz TSC_MHz           MSR 0x010
       -       1    0.06     858    2294  0x0000000000000000
       0       0    0.06     847    2294  0x0000002a254b98ac
       1       1    0.06     878    2294  0x0000002a254efa3a
       2       1    0.07     843    2294  0x0000002a2551df65
       3       0    0.05     863    2294  0x0000002a2553fea2
turbostat: re-initialized with num_cpus 4
     CPU Avg_MHz   Busy% Bzy_MHz TSC_MHz           MSR 0x010
       -       2    0.20     849    2294  0x0000000000000000
       0       2    0.26     856    2294  0x0000000449abb60d
       1       2    0.20     844    2294  0x0000000449b087ec
       2       2    0.21     850    2294  0x0000000449b35d5d
       3       1    0.12     839    2294  0x0000000449b5fd5a
^C

Command mode across ACPI S3:
root@sharkbay:/home/lenb/turbostat-src# ./turbostat -M 0x10 sleep 10
./turbostat: Counter reset detected
14.196299 sec

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:15 -05:00
Len Brown e975db5d52 tools/power turbostat: tidy up output on Joule counter overflow
The RAPL Joules counter is limited in capacity.
Turbostat estimates how soon it can roll-over
based on the max TDP of the processor --
which tells us the maximum increment rate.

eg.
RAPL: 2759 sec. Joule Counter Range, at 95 Watts

So if a sample duration is longer than 2759 seconds on this system,
'**' replace the decimal place in the display to indicate
that the results may be suspect.

But the display had an extra ' ' in this case, throwing off the columns.

Also, the -J "Joules" option appended an extra "time" column
to the display.  While this may be useful, it printed the interval time,
which may not be the accurate time per processor.  Remove this column,
which appeared only when using '-J',
as we plan to add accurate per-cpu interval times in a future commit.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-01 01:33:15 -05:00
Srinivas Pandruvada ebf5926a00 tools/power turbostat: Replace MSR_NHM_TURBO_RATIO_LIMIT
Replace MSR_NHM_TURBO_RATIO_LIMIT with MSR_TURBO_RATIO_LIMIT.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-07 15:31:59 +02:00
Andy Shevchenko ac485cb4b3 tools/turbostat: allow user to alter DESTDIR and PREFIX
When run
	make -C tools DESTDIR=/my/nice/dir turbostat_install
get a message
	install: cannot create regular file '/usr/bin/turbostat': Permission denied

Allow user to alter DESTDIR and PREFIX variables.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-28 00:37:04 +02:00
Rafael J. Wysocki 73659be769 Merge branches 'pm-core', 'powercap' and 'pm-tools'
* pm-core:
  PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs
  PM / runtime: Document steps for device removal

* powercap:
  powercap: intel_rapl: Add missing Haswell model

* pm-tools:
  tools/power turbostat: work around RC6 counter wrap
  tools/power turbostat: initial KBL support
  tools/power turbostat: initial SKX support
  tools/power turbostat: decode BXT TSC frequency via CPUID
  tools/power turbostat: initial BXT support
  tools/power turbostat: print IRTL MSRs
  tools/power turbostat: SGX state should print only if --debug
2016-04-08 21:46:56 +02:00
Len Brown 9185e988e9 tools/power turbostat: work around RC6 counter wrap
Sometimes the rc6 sysfs counter spontaneously resets,
causing turbostat prints a very large number
as it tries to calcuate % = 100 * (old - new) / interval

When we see (old > new), print ***.**% instead
of a bogus huge number.

Note that this detection is not fool-proof, as the counter
could reset several times and still result in new > old.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07 22:18:40 +02:00
Len Brown cdc57272ea tools/power turbostat: initial KBL support
KBL is similar to SKL

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07 22:18:38 +02:00
Len Brown ec53e594c6 tools/power turbostat: initial SKX support
SKX has a lot in common with HSX

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07 22:18:36 +02:00
Len Brown e8efbc80db tools/power turbostat: decode BXT TSC frequency via CPUID
Hard-code BXT ART to 19200MHz, so turbostat --debug
can fully enumerate TSC:

CPUID(0x15): eax_crystal: 3 ebx_tsc: 186 ecx_crystal_hz: 0
TSC: 1190 MHz (19200000 Hz * 186 / 3 / 1000000)

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07 22:18:35 +02:00
Len Brown e4085d543e tools/power turbostat: initial BXT support
Broxton has a lot in common with SKL

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07 22:18:33 +02:00
Len Brown 5a63426e2a tools/power turbostat: print IRTL MSRs
Some processors use the Interrupt Response Time Limit (IRTL) MSR value
to describe the maximum IRQ response time latency for deep
package C-states.  (Though others have the register, but do not use it)
Lets print it out to give insight into the cases where it is used.

IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07 22:18:32 +02:00
Len Brown 8ae7225591 tools/power turbostat: SGX state should print only if --debug
The CPUID.SGX bit was printed, even if --debug was used

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07 22:18:30 +02:00
Linus Torvalds 277edbabf6 Power management and ACPI material for v4.6-rc1, part 1
- Redesign of cpufreq governors and the intel_pstate driver to
    make them use callbacks invoked by the scheduler to trigger CPU
    frequency evaluation instead of using per-CPU deferrable timers
    for that purpose (Rafael Wysocki).
 
  - Reorganization and cleanup of cpufreq governor code to make it
    more straightforward and fix some concurrency problems in it
    (Rafael Wysocki, Viresh Kumar).
 
  - Cleanup and improvements of locking in the cpufreq core (Viresh
    Kumar).
 
  - Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
    Kumar, Eric Biggers).
 
  - intel_pstate driver updates including fixes, optimizations and a
    modification to make it enable enable hardware-coordinated P-state
    selection (HWP) by default if supported by the processor (Philippe
    Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
    Franciosi).
 
  - Operating Performance Points (OPP) framework updates to improve
    its handling of voltage regulators and device clocks and updates
    of the cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).
 
  - Updates of the powernv cpufreq driver to fix initialization
    and cleanup problems in it and correct its worker thread handling
    with respect to CPU offline, new powernv_throttle tracepoint
    (Shilpasri Bhat).
 
  - ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).
 
  - ACPICA updates including one fix for a regression introduced
    by previos changes in the ACPICA code (Bob Moore, Lv Zheng,
    David Box, Colin Ian King).
 
  - Support for installing ACPI tables from initrd (Lv Zheng).
 
  - Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
    Chaugule).
 
  - Support for _HID(ACPI0010) devices (ACPI processor containers)
    and ACPI processor driver cleanups (Sudeep Holla).
 
  - Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
    Aleksey Makarov).
 
  - Modification of the ACPI PCI IRQ management code to make it treat
    255 in the Interrupt Line register as "not connected" on x86 (as
    per the specification) and avoid attempts to use that value as
    a valid interrupt vector (Chen Fan).
 
  - ACPI APEI fixes related to resource leaks (Josh Hunt).
 
  - Removal of modularity from a few ACPI drivers (BGRT, GHES,
    intel_pmic_crc) that cannot be built as modules in practice (Paul
    Gortmaker).
 
  - PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
    as a valid resource type (Harb Abdulhamid).
 
  - New device ID (future AMD I2C controller) in the ACPI driver for
    AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).
 
  - Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).
 
  - cpuidle menu governor optimization to avoid a square root
    computation in it (Rasmus Villemoes).
 
  - Fix for potential use-after-free in the generic device properties
    framework (Heikki Krogerus).
 
  - Updates of the generic power domains (genpd) framework including
    support for multiple power states of a domain, fixes and debugfs
    output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
    Geert Uytterhoeven).
 
  - Intel RAPL power capping driver updates to reduce IPI overhead in
    it (Jacob Pan).
 
  - System suspend/hibernation code cleanups (Eric Biggers, Saurabh
    Sengar).
 
  - Year 2038 fix for the process freezer (Abhilash Jindal).
 
  - turbostat utility updates including new features (decoding of more
    registers and CPUID fields, sub-second intervals support, GFX MHz
    and RC6 printout, --out command line option), fixes (syscall jitter
    detection and workaround, reductioin of the number of syscalls made,
    fixes related to Xeon x200 processors, compiler warning fixes) and
    cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJW50NXAAoJEILEb/54YlRxvr8QAIktC9+ft0y5AmU46hDcBWcK
 QutyWJL9X9BS6DWBJZA2qclDYFmhMfi5Fza1se0gQ9TnLB/KrBwHWLsiYoTsb1k+
 nPKf214aPk+qAhkVuyB4leNWML9Qz9n9jwku/EYxWWpgtbSRf3+0ioIKZeWWc/8V
 JvuaOu4O+g/tkmL7QTrnGWBwhIIssAAV85QPsHkx+g68MrCj4UMMzm7z9G21SPXX
 bmP8yIHsczX/XnRsY0W2NSno7Vdk6ImHpDJ26IAZg28WRNPWICHgGYHvB0TTWMvb
 tts+yqfF7/7QLRjT/M8k9CzDBDE/DnVqoZ0fNJ+aYr7hNKF32mtAN+jH9ZB9dl/P
 fEFapJkPxnWyzAoVoB9Dz0rkcZkYMlbxlLWzUGpaPq0JflUUTzLk0ApSjmMn4HRO
 UddwCDdyHTaYThp3gn6GbOb0pIP0SdOVbI1M2QV2x/4PLcT2Ft8Np1+1RFWOeinZ
 Bdl9AE890big0808mqbBzw/buETwr9FjHtCdDPXpP0vJpkBLu3nIYRNb0LCt39es
 mWMp6dFhGgvGj3D3ahTuV3GI8hdpDkh9SObexa11RCjkTKrXcwEmFxHxLeFXwKYq
 alG278bo6cSChRMziS1lis+W/3tsJRN4TXUSv1PPzJHrFgptQVFRStU9ngBKP+pN
 WB+itPc4Fw0YHOrAFsrx
 =cfty
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the majority of changes go into cpufreq and they are
  significant.

  First off, the way CPU frequency updates are triggered is different
  now.  Instead of having to set up and manage a deferrable timer for
  each CPU in the system to evaluate and possibly change its frequency
  periodically, cpufreq governors set up callbacks to be invoked by the
  scheduler on a regular basis (basically on utilization updates).  The
  "old" governors, "ondemand" and "conservative", still do all of their
  work in process context (although that is triggered by the scheduler
  now), but intel_pstate does it all in the callback invoked by the
  scheduler with no need for any additional asynchronous processing.

  Of course, this eliminates the overhead related to the management of
  all those timers, but also it allows the cpufreq governor code to be
  simplified quite a bit.  On top of that, the common code and data
  structures used by the "ondemand" and "conservative" governors are
  cleaned up and made more straightforward and some long-standing and
  quite annoying problems are addressed.  In particular, the handling of
  governor sysfs attributes is modified and the related locking becomes
  more fine grained which allows some concurrency problems to be avoided
  (particularly deadlocks with the core cpufreq code).

  In principle, the new mechanism for triggering frequency updates
  allows utilization information to be passed from the scheduler to
  cpufreq.  Although the current code doesn't make use of it, in the
  works is a new cpufreq governor that will make decisions based on the
  scheduler's utilization data.  That should allow the scheduler and
  cpufreq to work more closely together in the long run.

  In addition to the core and governor changes, cpufreq drivers are
  updated too.  Fixes and optimizations go into intel_pstate, the
  cpufreq-dt driver is updated on top of some modification in the
  Operating Performance Points (OPP) framework and there are fixes and
  other updates in the powernv cpufreq driver.

  Apart from the cpufreq updates there is some new ACPICA material,
  including a fix for a problem introduced by previous ACPICA updates,
  and some less significant changes in the ACPI code, like CPPC code
  optimizations, ACPI processor driver cleanups and support for loading
  ACPI tables from initrd.

  Also updated are the generic power domains framework, the Intel RAPL
  power capping driver and the turbostat utility and we have a bunch of
  traditional assorted fixes and cleanups.

  Specifics:

   - Redesign of cpufreq governors and the intel_pstate driver to make
     them use callbacks invoked by the scheduler to trigger CPU
     frequency evaluation instead of using per-CPU deferrable timers for
     that purpose (Rafael Wysocki).

   - Reorganization and cleanup of cpufreq governor code to make it more
     straightforward and fix some concurrency problems in it (Rafael
     Wysocki, Viresh Kumar).

   - Cleanup and improvements of locking in the cpufreq core (Viresh
     Kumar).

   - Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
     Kumar, Eric Biggers).

   - intel_pstate driver updates including fixes, optimizations and a
     modification to make it enable enable hardware-coordinated P-state
     selection (HWP) by default if supported by the processor (Philippe
     Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
     Franciosi).

   - Operating Performance Points (OPP) framework updates to improve its
     handling of voltage regulators and device clocks and updates of the
     cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).

   - Updates of the powernv cpufreq driver to fix initialization and
     cleanup problems in it and correct its worker thread handling with
     respect to CPU offline, new powernv_throttle tracepoint (Shilpasri
     Bhat).

   - ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).

   - ACPICA updates including one fix for a regression introduced by
     previos changes in the ACPICA code (Bob Moore, Lv Zheng, David Box,
     Colin Ian King).

   - Support for installing ACPI tables from initrd (Lv Zheng).

   - Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
     Chaugule).

   - Support for _HID(ACPI0010) devices (ACPI processor containers) and
     ACPI processor driver cleanups (Sudeep Holla).

   - Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
     Aleksey Makarov).

   - Modification of the ACPI PCI IRQ management code to make it treat
     255 in the Interrupt Line register as "not connected" on x86 (as
     per the specification) and avoid attempts to use that value as a
     valid interrupt vector (Chen Fan).

   - ACPI APEI fixes related to resource leaks (Josh Hunt).

   - Removal of modularity from a few ACPI drivers (BGRT, GHES,
     intel_pmic_crc) that cannot be built as modules in practice (Paul
     Gortmaker).

   - PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
     as a valid resource type (Harb Abdulhamid).

   - New device ID (future AMD I2C controller) in the ACPI driver for
     AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).

   - Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).

   - cpuidle menu governor optimization to avoid a square root
     computation in it (Rasmus Villemoes).

   - Fix for potential use-after-free in the generic device properties
     framework (Heikki Krogerus).

   - Updates of the generic power domains (genpd) framework including
     support for multiple power states of a domain, fixes and debugfs
     output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
     Geert Uytterhoeven).

   - Intel RAPL power capping driver updates to reduce IPI overhead in
     it (Jacob Pan).

   - System suspend/hibernation code cleanups (Eric Biggers, Saurabh
     Sengar).

   - Year 2038 fix for the process freezer (Abhilash Jindal).

   - turbostat utility updates including new features (decoding of more
     registers and CPUID fields, sub-second intervals support, GFX MHz
     and RC6 printout, --out command line option), fixes (syscall jitter
     detection and workaround, reductioin of the number of syscalls
     made, fixes related to Xeon x200 processors, compiler warning
     fixes) and cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu)"

* tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (182 commits)
  tools/power turbostat: bugfix: TDP MSRs print bits fixing
  tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump
  tools/power turbostat: call __cpuid() instead of __get_cpuid()
  tools/power turbostat: indicate SMX and SGX support
  tools/power turbostat: detect and work around syscall jitter
  tools/power turbostat: show GFX%rc6
  tools/power turbostat: show GFXMHz
  tools/power turbostat: show IRQs per CPU
  tools/power turbostat: make fewer systems calls
  tools/power turbostat: fix compiler warnings
  tools/power turbostat: add --out option for saving output in a file
  tools/power turbostat: re-name "%Busy" field to "Busy%"
  tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding
  tools/power turbostat: Intel Xeon x200: fix erroneous bclk value
  tools/power turbostat: allow sub-sec intervals
  ACPI / APEI: ERST: Fixed leaked resources in erst_init
  ACPI / APEI: Fix leaked resources
  intel_pstate: Do not skip samples partially
  intel_pstate: Remove freq calculation from intel_pstate_calc_busy()
  intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance()
  ...
2016-03-16 14:10:53 -07:00
Chen Yu 685b535b2c tools/power turbostat: bugfix: TDP MSRs print bits fixing
MSR_CONFIG_TDP_NOMINAL:
should print all 8 bits of base_ratio (bit 0:7) 0xFF

MSR_CONFIG_TDP_LEVEL_1:
should print all 15 bits of PKG_MIN_PWR_LVL1 (bit 48:62) 0x7FFF
should print all 15 bits of PKG_MAX_PWR_LVL1 (bit 32:46) 0x7FFF
should print all 8 bits of LVL1_RATIO (bit 16:23) 0xFF
should print all 15 bits of PKG_TDP_LVL1 (bit 0:14) 0x7FFF

And the same modification to MSR_CONFIG_TDP_LEVEL_2.

MSR_TURBO_ACTIVATION_RATIO:
should print all 8 bits of MAX_NON_TURBO_RATIO (bit 0:7) 0xFF

Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 04:22:57 -04:00
Len Brown 6c34f160df tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump
MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e008008 (...pkg-cstate-limit=0: unlimited)
should print as
MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e008008 (...pkg-cstate-limit=8: unlimited)

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 04:22:47 -04:00
Len Brown 5aea2f7f64 tools/power turbostat: call __cpuid() instead of __get_cpuid()
turbostat already checks whether calling each cpuid leavf is legal,
and it doesn't look at the function return value,
so call the simpler gcc intrinsic __cpuid() instead of __get_cpuid().

syntax only, no functional change

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:42 -04:00
Len Brown aa8d8cc79a tools/power turbostat: indicate SMX and SGX support
SGX presence is related to a SKL power workaround,
so lets show when that is enabled.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:42 -04:00
Len Brown 0102b06747 tools/power turbostat: detect and work around syscall jitter
The accuracy of Bzy_Mhz and Busy% depend on reading
the TSC, APERF, and MPERF close together in time.

When there is a very short measurement interval,
or a large system is profoundly idle, the changes
in APERF and MPERF may be very small.
They can be small enough that an expensive interrupt
between reading APERF and MPERF can cause the APERF/MPERF
ratio to become inaccurate, resulting in invalid
calculation and display of Bzy_MHz.

A dummy APERF read of APERF makes this problem
much more rare.  Apparently this 1st systemn call
after exiting a long stretch of idle is when we
typically see expensive timer interrupts that cause
large jitter.

For the cases that dummy APERF read fails to prevent,
we compare the latency of the APERF and MPERF reads.
If they differ by more than 2x, we re-issue them.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:41 -04:00
Len Brown fdf676e51f tools/power turbostat: show GFX%rc6
The column "GFX%c6" show the percentage of time the GPU
is in the "render C6" state, rc6.  Deep package C-states on several
systems depend on the GPU being in RC6.

This information comes from the counter
/sys/class/drm/card0/power/rc6_residency_ms,
as read before and after the measurement interval.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:41 -04:00
Len Brown 27d47356b6 tools/power turbostat: show GFXMHz
Under the column "GFXMHz", show a snapshot of this attribute:
/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz

This is an instantaneous snapshot of what sysfs presents
at the end of the measurement interval.  turbostat does
not average or otherwise perform any math on this value.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:40 -04:00
Len Brown 562a2d377b tools/power turbostat: show IRQs per CPU
The new IRQ column shows how many interrupts have occurred on each CPU
during the measurement inteval.  This information comes from
the difference between /proc/interrupts shapshots made before
and after the measurement interval.

The first row, the system summary, shows the sum of the IRQS
for all CPUs during that interval.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:40 -04:00
Len Brown 36229897ba tools/power turbostat: make fewer systems calls
skip the open(2)/close(2) on each msr read
by keeping the /dev/cpu/*/msr files open.

The remaining read(2) is generally far fewer cycles
than the removed open(2) system call.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:40 -04:00
Len Brown 58cc30a4e6 tools/power turbostat: fix compiler warnings
Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:39 -04:00
Len Brown b7d8c1483b tools/power turbostat: add --out option for saving output in a file
By default...

Turbostat --debug gconfiguration info goes to stderr.

In FORK mode, turbostat statistics go to stderr.

In PERIODIC mode, turbostat statistics go to stdout.

These defaults do not change, but an option "--out file"
will send all output above only to the specified file.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:39 -04:00
Len Brown 75d2e44e60 tools/power turbostat: re-name "%Busy" field to "Busy%"
some tools processing turbostat output
have difficulty with items that begin with %...

Reported-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:38 -04:00
Hubert Chrzaniuk cbf97abaf3 tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding
Following changes have been made:
- changed MSR_NHM_TURBO_RATIO_LIMIT to MSR_TURBO_RATIO_LIMIT in debug print
  for consistency with Developer Manual
- updated definition of bitfields in MSR_TURBO_RATIO_LIMIT and appropriate
  parsing code
- added x200 to list of architectures that do not support Nahlem compatible
  definition of MSR_TURBO_RATIO_LIMIT register (x200 has the register but
  bits definition is custom)
- fixed typo in code that parses MSR_TURBO_RATIO_LIMIT
  (logical instead of bitwise operator)
- changed MSR_TURBO_RATIO_LIMIT parsing algorithm so the print out had the
  same order as implementations for other platforms

Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:38 -04:00
Chrzaniuk, Hubert 121b48bb77 tools/power turbostat: Intel Xeon x200: fix erroneous bclk value
x200 does not enable any way to programmatically obtain bus clock
speed. Bclk for the architecture has a fixed value of 100 MHz.
At the same time x200 cannot be included in has_snb_msrs since
it does not support C7 idle state.

prior to this patch, MHz values reported on this chip
were erroneously calculated using bclk of 133MHz,
causing MHz values to be reported 33% higher than actual.

Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:37 -04:00
Len Brown 2a0609c02e tools/power turbostat: allow sub-sec intervals
turbostat -i interval_sec

will sample and display statistics every interval_sec.
interval_sec used to be a whole number of seconds,
but now we accept a decimal, as small as 0.001 sec (1 ms).

Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-13 03:55:32 -04:00
Colin Ian King 1b69317d2d tools/power turbostat: fix various build warnings
When building with gcc 6 we're getting various build warnings that just
require some trivial function declaration and call fixes:

  turbostat.c: In function ‘dump_cstate_pstate_config_info’:
  turbostat.c:1973:1: warning: type of ‘family’ defaults to ‘int’
   dump_cstate_pstate_config_info(family, model)
  turbostat.c:1973:1: warning: type of ‘model’ defaults to ‘int’
  turbostat.c: In function ‘get_tdp’:
  turbostat.c:2145:8: warning: type of ‘model’ defaults to ‘int’
   double get_tdp(model)
  turbostat.c: In function ‘perf_limit_reasons_probe’:
  turbostat.c:2259:6: warning: type of ‘family’ defaults to ‘int’
   void perf_limit_reasons_probe(family, model)
  turbostat.c:2259:6: warning: type of ‘model’ defaults to ‘int’

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-wbicer8n0s9qe6ql8h9x478e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-03 11:10:39 -03:00
Len Brown f0057310b4 tools/power turbostat: Decode MSR_MISC_PWR_MGMT
This MSR is helpful to show if P-state HW coordination
is enabled or disabled.

Signed-off-by: Len Brown <len.brown@intel.com>
2016-02-17 01:43:05 -05:00
Len Brown 7f5c258e1c tools/power turbostat: decode HWP registers
# turbostat --debug
...
CPUID(6): ... HWP, HWPnotify, HWPwindow, HWPepp, HWPpkg ...
...
cpu0: MSR_PM_ENABLE: 0x00000001 (HWP)
cpu0: MSR_HWP_CAPABILITIES: 0x01050916 (high 0x16 guar 0x9 eff 0x5 low 0x1)
cpu0: MSR_HWP_REQUEST: 0x80001604 (min 0x4 max 0x16 des 0x0 epp 0x80 window 0x0 pkg 0x0)
cpu0: MSR_HWP_INTERRUPT: 0x00000001 (EN_Guaranteed_Perf_Change, Dis_Excursion_Min)
cpu0: MSR_HWP_STATUS: 0x00000000 (No-Guaranteed_Perf_Change, No-Excursion_Min)

Signed-off-by: Len Brown <len.brown@intel.com>
2016-02-17 01:42:34 -05:00
Len Brown 61a87ba789 tools/power turbostat: CPUID(0x16) leaf shows base, max, and bus frequency
This CPUID leaf is available on Skylake:

CPUID(0x16): base_mhz: 1500 max_mhz: 2200 bus_mhz: 100

Signed-off-by: Len Brown <len.brown@intel.com>
2016-02-17 01:42:20 -05:00
Len Brown 69807a638f tools/power turbostat: decode more CPUID fields
for debugging, dump a few more fields:

CPUID(1): SSE3 MONITOR EIST TM2 TSC MSR ACPI-TM TM

cpu0: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MONITOR)

Signed-off-by: Len Brown <len.brown@intel.com>
2016-02-17 01:41:53 -05:00
Len Brown ec0adc539b tools/power turbostat: use new name for MSR_PLATFORM_INFO
MSR_PLATFORM_INFO is the new name for MSR_NHM_PLATFORM_INFO

no functional change

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-13 23:27:13 +01:00
Len Brown 759d2a932b tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO
MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=6 lock=0)
should print all 7 bits of MAX_NON_TURBO_RATIO (in decimal):
MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=22 lock=0)

Signed-off-by: Len Brown <len.brown@intel.com>
2015-10-22 02:42:12 -04:00