In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian
host, num_buffers wasn't byte-swapped correctly, so large incoming
packets got corrupted.
To fix, fill it in within hdr - this also makes sure it gets
the correct type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch correct the bad expression while writing the
bit-pattern from software's buffer to hardware registers.
Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commone register macors (e.g. RSR) is too commont to drivers, it may
be conflict with the architectures (e.g. xtensa, sh).
The related warnings (with allmodconfig under xtensa):
CC [M] drivers/net/usb/sr9700.o
In file included from drivers/net/usb/sr9700.c:24:0:
drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined
#define RSR 0x06
^
In file included from ./arch/xtensa/include/asm/bitops.h:22:0,
from include/linux/bitops.h:36,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/module.h:9,
from drivers/net/usb/sr9700.c:13:
./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition
#define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v));
^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
return type of wait_for_completion_timeout is unsigned long not int and
always returns >=0 , this patch adds a suitable return variable and
simplifies the return value checking as there is no < 0 case.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
return type of wait_for_completion_timeout is unsigned long not int, this
patch uses the return value of wait_for_completion_timeout in the condition
directly rather than assigning it to an incorrect type variable.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Mark Brown <broonie@kernel.org>
return type of wait_for_completion_timeout is unsigned long not int, this
patch changes the type of m from int to unsigned long.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Mark Brown <broonie@kernel.org>
SMBus access functions assume that 16-bit values are formatted as
little endian numbers. The direct i2c access functions in regmap,
however, assume that 16-bit values are formatted as big endian numbers.
As a result, the current code returns different values if an i2c chip's
16-bit registers are accessed through i2c access functions vs. SMBus
access functions.
Use regmap_smbus_read_word_swapped and regmap_smbus_write_word_swapped
for 16-bit SMBus accesses if a chip is configured as REGMAP_ENDIAN_BIG.
If the chip is configured as REGMAP_ENDIAN_LITTLE, keep using
regmap_smbus_write_word_data and regmap_smbus_read_word_data. Otherwise
reject registration if the controller does not support direct i2c accesses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
We'll need to call it from regmap-i2c.c, which can be built as module.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the include of mach/dma.h to the legacy PXA DMA code where it is used.
This enables building spi-pxa2xx on ARM64.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull cifs fixes from Steve French:
"Three small cifs fixes. One fixes a hang under stress, and the other
two are security related"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix MUST SecurityFlags filtering
Complete oplock break jobs before closing file handle
cifs: use memzero_explicit to clear stack buffer
Pull ARM fixes from Russell King:
"A number of ARM fixes, the biggest is fixing a regression caused by
appended DT blobs exceeding 64K, causing the decompressor fixup code
to fail to patch the DT blob. Another important fix is for the ASID
allocator from Will Deacon which prevents some rare crashes seen on
some systems. Lastly, there's a build fix for v7M systems when printk
support is disabled.
The last two remaining fixes are more cosmetic - the IOMMU one
prevents an annoying harmless warning message, and we disable the
kernel strict memory permissions on non-MMU which can't support it
anyway"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover
ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled
ARM: 8295/1: fix v7M build for !CONFIG_PRINTK
ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown
These are generated by very recent toolchains and result in an error
message when attenpting to convert a kernel from ELF to ECOFF.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The if construct was getting hard to read and would be getting even more
complex with the next bug fix.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
return type of wait_for_completion_timeout is unsigned long not int, this
patch adds an appropriate variable and fixes up the assignment. It removes
the else branch as the only thing it was doing is assigning ret = 0; - but
ret is never used thereafter so that is not needed. As the string in
dev_err already states "timeout" there is little point in printing the 0.
A typo in "trasfer" -> transfer is also fixed.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing stubs for regulator_suspend_prepare() and
regulator_suspend_finish() to fix exynos_defconfig build without
REGULATOR:
arch/arm/mach-exynos/built-in.o: In function `exynos_suspend_finish':
arch/arm/mach-exynos/suspend.c:537: undefined reference to `regulator_suspend_finish'
arch/arm/mach-exynos/built-in.o: In function `exynos_suspend_prepare':
arch/arm/mach-exynos/suspend.c:520: undefined reference to `regulator_suspend_prepare'
make: *** [vmlinux] Error 1
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Joerg Roedel <joro@8bytes.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the adjusments made as part of perf_event_task_tick() use the
percpu rotation lists to iterate over any active PMU contexts, but these
are not used by the context rotation code, having been replaced by
separate (per-context) hrtimer callbacks. However, some manipulation of
the rotation lists (i.e. removal of contexts) has remained in
perf_rotate_context(). This leads to the following issues:
* Contexts are not always removed from the rotation lists. Removal of
PMUs which have been placed in rotation lists, but have not been
removed by a hrtimer callback can result in corruption of the rotation
lists (when memory backing the context is freed).
This has been observed to result in hangs when PMU drivers built as
modules are inserted and removed around the creation of events for
said PMUs.
* Contexts which do not require rotation may be removed from the
rotation lists as a result of a hrtimer, and will not be considered by
the unthrottling code in perf_event_task_tick.
This patch fixes the issue by updating the rotation ist when events are
scheduled in/out, ensuring that each rotation list stays in sync with
the HW state. As each event holds a refcount on the module of its PMU,
this ensures that when a PMU module is unloaded none of its CPU contexts
can be in a rotation list. By maintaining a list of perf_event_contexts
rather than perf_event_cpu_contexts, we don't need separate paths to
handle the cpu and task contexts, which also makes the code a little
simpler.
As the rotation_list variables are not used for rotation, these are
renamed to active_ctx_list, which better matches their current function.
perf_pmu_rotate_{start,stop} are renamed to
perf_pmu_ctx_{activate,deactivate}.
Reported-by: Johannes Jensen <johannes.jensen@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <Will.Deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150129134511.GR17721@leverpostej
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When initialising an event, perf_init_event will call try_module_get() to
ensure that the PMU's module cannot be removed for the lifetime of the
event, with __free_event() dropping the reference when the event is
finally destroyed. If something fails after the event has been
initialised, but before the event is installed, perf_event_alloc will
drop the reference on the module.
However, if we fail to initialise an event for some reason (e.g. we ask
an uncore PMU to perform sampling, and it refuses to initialise the
event), we do not drop the refcount. If we try to open such a bogus
event without a precise IDR type, we will loop over each PMU in the pmus
list, incrementing each of their refcounts without decrementing them.
This patch adds a module_put when pmu->event_init(event) fails, ensuring
that the refcounts are balanced in failure cases. As the innards of the
precise and search based initialisation look very similar, this logic is
hoisted out into a new helper function. While the early return for the
failed try_module_get is removed from the search case, this is handled
by the remaining return when ret is not -ENOENT.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420642611-22667-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we flag available data (via poll syscall) on perf fd with
POLL_IN macro, which is normally used for SIGIO interface.
We've been lucky, because POLLIN (0x1) is subset of POLL_IN (0x20001)
and sys_poll (do_pollfd function) cut the extra bit out (0x20000).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422467678-22341-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So what I suspect; but I'm in zombie mode today it seems; is that while
I initially thought that it was impossible for ctx to change when
refcount dropped to 0, I now suspect its possible.
Note that until perf_remove_from_context() the event is still active and
visible on the lists. So a concurrent sys_perf_event_open() from another
task into this task can race.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: mark.rutland@arm.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150129134434.GB26304@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri reported triggering the new WARN_ON_ONCE in event_sched_out over
the weekend:
event_sched_out.isra.79+0x2b9/0x2d0
group_sched_out+0x69/0xc0
ctx_sched_out+0x106/0x130
task_ctx_sched_out+0x37/0x70
__perf_install_in_context+0x70/0x1a0
remote_function+0x48/0x60
generic_exec_single+0x15b/0x1d0
smp_call_function_single+0x67/0xa0
task_function_call+0x53/0x80
perf_install_in_context+0x8b/0x110
I think the below should cure this; if we install a group leader it
will iterate the (still intact) group list and find its siblings and
try and install those too -- even though those still have the old
event->ctx -- in the new ctx.
Upon installing the first group sibling we'd try and schedule out the
group and trigger the above warn.
Fix this by installing the group leader last, installing siblings
would have no effect, they're not reachable through the group lists
and therefore we don't schedule them.
Also delay resetting the state until we're absolutely sure the events
are quiescent.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Reported-by: vincent.weaver@maine.edu
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150126162639.GA21418@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There have been a few reported issues wrt. the lack of locking around
changing event->ctx. This patch tries to address those.
It avoids the whole rwsem thing; and while it appears to work, please
give it some thought in review.
What I did fail at is sensible runtime checks on the use of
event->ctx, the RCU use makes it very hard.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.209535886@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a few WARN()s to catch things that should never happen.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.150481799@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vladislav Yasevich says:
====================
Restore UFO support to virtio_net devices
commit 3d0ad09412
Author: Ben Hutchings <ben@decadent.org.uk>
Date: Thu Oct 30 18:27:12 2014 +0000
drivers/net: Disable UFO through virtio
Turned off UFO support to virtio-net based devices due to issues
with IPv6 fragment id generation for UFO packets. The issue
was that IPv6 UFO/GSO implementation expects the fragment id
to be supplied in skb_shinfo(). However, for packets generated
by the VMs, the fragment id is not supplied which causes all
IPv6 fragments to have the id of 0.
The problem is that turning off UFO support on tap/macvtap
as well as virtio devices caused issues with migrations.
Migrations would fail when moving a vm from a kernel supporting
expecting UFO to work to the newer kernels that disabled UFO.
This series provides a partial solution to address the migration
issue. The series allows us to track whether skb_shinfo()->ip6_frag_id
has been set by treating value of 0 as unset.
This lets GSO code to generate fragment ids if they are necessary
(ex: packet was generated by VM or packet socket).
Since v3:
- Resolved build issue when IPv6 is a module.
- Removed trailing white space.
Since v2:
- Rebase and rebuild to make sure everything works. No changes
to the patches were done.
Since v1:
- Removed the skb bit and use value of 0 as tracker.
- Used Eric's suggestion to set fragment id as 0x80000000 if id
generation procedure yeilded a 0 result.
- Consolidated ipv6 id genration code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 3d0ad09412.
Now that GSO functionality can correctly track if the fragment
id has been selected and select a fragment id if necessary,
we can re-enable UFO on tap/macvap and virtio devices.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 5188cd44c5.
Now that GSO layer can track if fragment id has been selected
and can allocate one if necessary, we don't need to do this in
tap and macvtap. This reverts most of the code and only keeps
the new ipv6 fragment id generation function that is still needed.
Fixes: 3d0ad09412 (drivers/net: Disable UFO through virtio)
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the IPv6 fragment id has not been set and we perform
fragmentation due to UFO, select a new fragment id.
We now consider a fragment id of 0 as unset and if id selection
process returns 0 (after all the pertrubations), we set it to
0x80000000, thus giving us ample space not to create collisions
with the next packet we may have to fragment.
When doing UFO integrity checking, we also select the
fragment id if it has not be set yet. This is stored into
the skb_shinfo() thus allowing UFO to function correclty.
This patch also removes duplicate fragment id generation code
and moves ipv6_select_ident() into the header as it may be
used during GSO.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We explicitly mark the task running after returning from
a __rt_mutex_slowlock() call, which does the actual sleeping
via wait-wake-trylocking. As such, this patch does two things:
(1) refactors the code so that setting current to TASK_RUNNING
is done by __rt_mutex_slowlock(), and not by the callers. The
downside to this is that it becomes a bit unclear when at what
point we block. As such I've added a comment that the task
blocks when calling __rt_mutex_slowlock() so readers can figure
out when it is running again.
(2) relaxes setting current's state through __set_current_state(),
instead of it's more expensive barrier alternative. There was no
need for the implied barrier as we're obviously not planning on
blocking.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422857784.18096.1.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Call __set_task_state() instead of assigning the new state
directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP
environments, keeping track of who last changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422257769-14083-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "thread would block" case can be checked without grabbing ->wait.lock.
[ If the check does not return early then grab the lock and recheck.
A memory barrier is not needed as complete() and complete_all() imply
a barrier.
The ACCESS_ONCE() is needed for calls in a loop that, if inlined, could
optimize out the re-fetching of x->done. ]
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422013307-13200-1-git-send-email-der.herr@hofr.at
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By the time we wake up and get the lock after being asleep
in the slowpath, we better be running. As good practice,
be explicit about this and avoid any mischief.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1421717961.4903.11.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The second 'mutex' shouldn't be there, it can't be about the mutex,
as the mutex can't be freed, but unlocked, the memory where the
mutex resides however, can be freed.
Signed-off-by: Sharon Dvir <sharon.dvir1@mail.huji.ac.il>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422827252-31363-1-git-send-email-sharon.dvir1@mail.huji.ac.il
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a new wait_on_bit_timeout() helper, basically the same as
wait_on_bit() except that it also takes a 'timeout' parameter.
All the building blocks like bit_wait_timeout() and
out_of_line_wait_on_bit_timeout() are already in place so the
addition is rather simple.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: davem@davemloft.net
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422616476-2917-2-git-send-email-johan.hedberg@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__schedule() disables preemption during its job and re-enables it
afterward without doing a preemption check to avoid recursion.
But if an event happens after the context switch which requires
rescheduling, we need to check again if a task of a higher priority
needs the CPU. A preempt irq can raise such a situation. To handle that,
__schedule() loops on need_resched().
But preempt_schedule_*() functions, which call __schedule(), also loop
on need_resched() to handle missed preempt irqs. Hence we end up with
the same loop happening twice.
Lets simplify that by attributing the need_resched() loop responsibility
to all __schedule() callers.
There is a risk that the outer loop now handles reschedules that used
to be handled by the inner loop with the added overhead of caller details
(inc/dec of PREEMPT_ACTIVE, irq save/restore) but assuming those inner
rescheduling loop weren't too frequent, this shouldn't matter. Especially
since the whole preemption path is now losing one loop in any case.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1422404652-29067-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpu_active_mask is rarely changed (only on hotplug), so remove this
operation to gain a little performance.
If there is a change in cpu_active_mask, rq_online_dl() and
rq_offline_dl() should take care of it normally, so cpudl::free_cpus
carries enough information for us.
For the rare case when a task is put onto a dying cpu (which
rq_offline_dl() can't handle in a timely fashion), it will be
handled through _cpu_down()->...->multi_cpu_stop()->migration_call()
->migrate_tasks(), preventing the task from hanging on the
dead cpu.
Cc: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
[peterz: changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421642980-10045-2-git-send-email-pang.xunlei@linaro.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The commit 177ef2a631 ("sched/deadline: Fix a precision problem in
the microseconds range") forgot to change the UP version of
hrtick_start(), do so now.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Fixes: 177ef2a631 ("sched/deadline: Fix a precision problem in the microseconds range")
[ Fixed the changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-7-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to dequeue/enqueue and push/pull if there are
no scheduling parameters changed for the DL class.
Both fair and RT classes already check if parameters changed for
them to avoid unnecessary overhead. This patch add the parameters
changed test for the DL class in order to reduce overhead.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
[ Fixed up the changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-5-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we fail to start the deadline timer in update_curr_dl(), we
forget to clear ->dl_yielded, resulting in wrecked time keeping.
Since the natural place to clear both ->dl_yielded and ->dl_throttled
is in replenish_dl_entity(); both are after all waiting for that event;
make it so.
Luckily since 67dfa1b756 ("sched/deadline: Implement
cancel_dl_timer() to use in switched_from_dl()") the
task_on_rq_queued() condition in dl_task_timer() must be true, and can
therefore call enqueue_task_dl() unconditionally.
Reported-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-4-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After update_curr_dl() the current task might not be the leftmost task
anymore. In that case do not start a new hrtick for it.
In this case NEED_RESCHED will be set and the next schedule will start
the hrtick for the new task if and when appropriate.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Acked-by: Juri Lelli <juri.lelli@arm.com>
[ Rewrote the changelog and comment. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1416962647-76792-2-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 67dfa1b756 ("sched/deadline: Implement cancel_dl_timer() to
use in switched_from_dl()") removed the hrtimer_try_cancel() function
call out from init_dl_task_timer(), which gets called from
__setparam_dl().
The result is that we can now re-init the timer while its active --
this is bad and corrupts timer state.
Furthermore; changing the parameters of an active deadline task is
tricky in that you want to maintain guarantees, while immediately
effective change would allow one to circumvent the CBS guarantees --
this too is bad, as one (bad) task should not be able to affect the
others.
Rework things to avoid both problems. We only need to initialize the
timer once, so move that to __sched_fork() for new tasks.
Then make sure __setparam_dl() doesn't affect the current running
state but only updates the parameters used to calculate the next
scheduling period -- this guarantees the CBS functions as expected
(albeit slightly pessimistic).
This however means we need to make sure __dl_clear_params() needs to
reset the active state otherwise new (and tasks flipping between
classes) will not properly (re)compute their first instance.
Todo: close class flipping CBS hole.
Todo: implement delayed BW release.
Reported-by: Luca Abeni <luca.abeni@unitn.it>
Acked-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Luca Abeni <luca.abeni@unitn.it>
Fixes: 67dfa1b756 ("sched/deadline: Implement cancel_dl_timer() to use in switched_from_dl()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150128140803.GF23038@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Revert IPoIB driver back to 3.18 state. We had a number of fixes go
into 3.19, but they introduced regressions. We tried to get everything
fixed up but ran out of time, so we'll try again for 3.20.
- Similarly, turn off the new "extended query port" verb. Late in the
cycle we realized the ABI is not quite right, and rather than freeze
something in a rush and make a mistake, we'll take a bit more time
and get it right in 3.20.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qi4o
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband reverts from Roland Dreier:
"Last minute InfiniBand/RDMA changes for 3.19:
- Revert IPoIB driver back to 3.18 state. We had a number of fixes
go into 3.19, but they introduced regressions. We tried to get
everything fixed up but ran out of time, so we'll try again for
3.20.
- Similarly, turn off the new "extended query port" verb. Late in
the cycle we realized the ABI is not quite right, and rather than
freeze something in a rush and make a mistake, we'll take a bit
more time and get it right in 3.20"
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/core: Temporarily disable ex_query_device uverb
Revert "IPoIB: Consolidate rtnl_lock tasks in workqueue"
Revert "IPoIB: Make the carrier_on_task race aware"
Revert "IPoIB: fix MCAST_FLAG_BUSY usage"
Revert "IPoIB: fix mcast_dev_flush/mcast_restart_task race"
Revert "IPoIB: change init sequence ordering"
Revert "IPoIB: Use dedicated workqueues per interface"
Revert "IPoIB: Make ipoib_mcast_stop_thread flush the workqueue"
Revert "IPoIB: No longer use flush as a parameter"
1/ Another live lock, needs backporting
2/ work-around false positive with new warnings.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=qYoP
-----END PGP SIGNATURE-----
Merge tag 'md/3.19-fixes' of git://neil.brown.name/md
Pull two fixes for md from Neil Brown:
- Another live lock, needs backporting
- work-around false positive with new warnings.
* tag 'md/3.19-fixes' of git://neil.brown.name/md:
md/bitmap: fix a might_sleep() warning.
md/raid5: fix another livelock caused by non-aligned writes.
Some AMD CS553x devices have read-only BARs because of a firmware or
hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no
longer works after 36e8164882 ("PCI: Restore detection of read-only
BARs"). Prior to 36e8164882, we filled in res->start; afterwards we
leave it zeroed out. The quirk only updated the size, so the driver tried
to use a region starting at zero, which didn't work.
Expand quirk_cs5536_vsa() to read the base addresses from the BARs and
hard-code the sizes.
On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e8164882,
we interpret that as a 512-byte BAR based on the lowest-order bit set. Per
datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to
avoid clearing any address bits if a platform uses only 64-byte alignment.
[bhelgaas: changelog, reduce BAR 2 size to 64]
Fixes: 36e8164882 ("PCI: Restore detection of read-only BARs")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4
Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf
Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdf
Reported-and-tested-by: Nix <nix@esperi.org.uk>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v.2.6.27+
Under CONFIG_DEBUG_ATOMIC_SLEEP=y, aio_read_event_ring() will throw
warnings like the following due to being called from wait_event
context:
WARNING: CPU: 0 PID: 16006 at kernel/sched/core.c:7300 __might_sleep+0x7f/0x90()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810d85a3>] prepare_to_wait_event+0x63/0x110
Modules linked in:
CPU: 0 PID: 16006 Comm: aio-dio-fcntl-r Not tainted 3.19.0-rc6-dgc+ #705
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffffffff821c0372 ffff88003c117cd8 ffffffff81daf2bd 000000000000d8d8
ffff88003c117d28 ffff88003c117d18 ffffffff8109beda ffff88003c117cf8
ffffffff821c115e 0000000000000061 0000000000000000 00007ffffe4aa300
Call Trace:
[<ffffffff81daf2bd>] dump_stack+0x4c/0x65
[<ffffffff8109beda>] warn_slowpath_common+0x8a/0xc0
[<ffffffff8109bf56>] warn_slowpath_fmt+0x46/0x50
[<ffffffff810d85a3>] ? prepare_to_wait_event+0x63/0x110
[<ffffffff810d85a3>] ? prepare_to_wait_event+0x63/0x110
[<ffffffff810bdfcf>] __might_sleep+0x7f/0x90
[<ffffffff81db8344>] mutex_lock+0x24/0x45
[<ffffffff81216b7c>] aio_read_events+0x4c/0x290
[<ffffffff81216fac>] read_events+0x1ec/0x220
[<ffffffff810d8650>] ? prepare_to_wait_event+0x110/0x110
[<ffffffff810fdb10>] ? hrtimer_get_res+0x50/0x50
[<ffffffff8121899d>] SyS_io_getevents+0x4d/0xb0
[<ffffffff81dba5a9>] system_call_fastpath+0x12/0x17
---[ end trace bde69eaf655a4fea ]---
There is not actually a bug here, so annotate the code to tell the
debug logic that everything is just fine and not to fire a false
positive.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Michael S. Tsirkin
Sanjeev Sharma
Chen Gang
Mark Brown
Nicholas Mc Guire
Nicholas Mc Guire
Guenter Roeck
Rob Herring
Linus Torvalds
Lars Persson
Ralf Baechle
Krzysztof Kozlowski
Mark Rutland
Jiri Olsa
Peter Zijlstra
David S. Miller
Vlad Yasevich
Ingo Molnar
Davidlohr Bueso
Sharon Dvir
Johan Hedberg
Frederic Weisbecker
Xunlei Pang
Wanpeng Li
Myron Stowe
Dave Chinner