Commit Graph

20 Commits

Author SHA1 Message Date
Linus Torvalds db06f826ec The new and exciting feature this time around is in the clk core.
We've added duty cycle support to the clk API so that clk signal
 duty cycle ratios can be adjusted while taking into account things
 like clk dividers and clk tree hierarchy. So far only one SoC has
 implemented support for this, but I expect there will be more to
 come in the future.
 
 Outside of the core, we have the usual pile of clk driver updates
 and additions. The Amlogic meson driver got the most lines in the
 diffstat this time around because it added support for a whole bunch
 of hardware and duty cycle configuration. After that the Rockchip PX30,
 Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff.
 We're left with the collection of non-critical fixes after that. Overall
 it looks pretty quiet this time.
 
 Core:
  - Clk duty cycle support
  - Proper CLK_SET_RATE_GATE support throughout the tree
 
 New Drivers:
  - Actions Semi Owl series S700 SoC clk driver
  - Qualcomm SDM845 display clock controller
  - i.MX6SX ocram_s clk support
  - Uniphier NAND, USB3 PHY, and SPI clk support
  - Qualcomm RPMh clk driver
  - i.MX7D mailbox clk support
  - Maxim 9485 Programmable Clock Generator
  - Expose 32 kHz PLL on PXA SoCs
  - imx6sll GPIO clk gate support
  - Atmel at91 I2S audio clk support
  - SI544/SI514 clk on/off support
  - i.MX6UL GPIO clock gates in CCM CCGR
  - Renesas Crypto Engine clocks on R-Car H3
  - Renesas clk support for the new RZ/N1D SoC
  - Allwinner A64 display engine clock support
  - Support for Rockchip's PX30 SoC
  - Amlogic Meson axg PCIe and audio clocks
  - Amlogic Meson GEN CLK on gxbb, gxl and axg
 
 Updates:
  - Remove an unused variable from Exynos4412 ISP driver
  - Fix a thinko bug in SCMI clk division logic
  - Add missing of_node_put()s in some i.MX clk drivers
  - Tegra SDMMC clk jitter improvements with high speed signaling modes
  - SPDX tagging for qcom and cs2000-cp drivers
  - Stop leaking con ids in __clk_put()
  - Fix a corner case in fixed factor clk probing where node is in DT but
    parent clk is registered much later
  - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value
  - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
  - Convert to CLK_IS_CRITICAL for i.MX51/53 driver
  - Fix Tegra BPMP driver oops when xlating a NULL clk
  - Proper default configuration for vic03 and vde clks on Tegra124
  - Mark Tegra memory controller clks as critical
  - Fix array bounds clamp in Tegra's emc determine_rate() op
  - Ingenic i2s bit update and allow UDC clk to gate
  - Fix name of aspeed SDC clk define to have only one 'CLK'
  - Fix i.MX6QDL video clk parent
  - Critical clk markings for qcom SDM845
  - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
  - Mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying
    the pwm used to drive the logic supply of the rk3399 core.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlt0WD0RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSX5jBAAlMLb0fqnuAGNJeXZDk5rsCa496LMyGWx
 ku7uLA2H68SlbSQqq8FUPoCjDZkmsu2CbOX1U2/H4HFDS0pqpPiV3mZNtSeacedp
 4Wf8yUB5G3xdq9QUCSX5LxMmEQoGeJ+gaTspBvM6sNvEMBR2kEMGBqUy768tnDTR
 qCQ8Q1jOU6l8IdFV0SZGssmZ+oFqOyQoJVquPWPkw1+p/2f1KyYIyG5J5FXGxgcR
 1XQITY/I/dShQ2wd+ZeDdt+GjZqIXQ06Pt3ruRG7HVP79Zt1XCRJd5dZ2lf+Wj8T
 1ul3TWCAMYZ8gCPebLMbBGzKvQJQJcDU6DpIZsrUDN+C6z7KCS9vqeCxP9cF+3jJ
 LOmA6cWE7z9Vkk9s0I0KJJ2Sw7wRoXzE5OJcwa/yousSz3s9cX+F8SAkdZs77oUF
 0XnzPsvwdHI/egQ4UrsStPHM/gOFhsQqo8vvm5xaaTR2AxLKBHuPa9oUv9YpO/P5
 J6FCst3qeY3Wp69fJ5/Z058OFOAt81dKXij2fZJBOO4KJy7Kse8Sz5ApybXVAbY5
 lfvx+KGMITFqLYrcRIQZmlCuoHcMwI0FtHr9Ens5GXdbrJ+W+FlvP43eLCA0ZmRx
 9DidemChj3k3PC3H6tbax/jzV4IIxZdyUoBJ1imL4uyhhaXp/qr45A/aGwNp8Q8a
 WvkIGm3epK4=
 =Mcn+
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The new and exciting feature this time around is in the clk core.
  We've added duty cycle support to the clk API so that clk signal duty
  cycle ratios can be adjusted while taking into account things like clk
  dividers and clk tree hierarchy. So far only one SoC has implemented
  support for this, but I expect there will be more to come in the
  future.

  Outside of the core, we have the usual pile of clk driver updates and
  additions. The Amlogic meson driver got the most lines in the diffstat
  this time around because it added support for a whole bunch of
  hardware and duty cycle configuration. After that the Rockchip PX30,
  Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the
  diff. We're left with the collection of non-critical fixes after that.
  Overall it looks pretty quiet this time.

  Core:
   - Clk duty cycle support
   - Proper CLK_SET_RATE_GATE support throughout the tree

  New Drivers:
   - Actions Semi Owl series S700 SoC clk driver
   - Qualcomm SDM845 display clock controller
   - i.MX6SX ocram_s clk support
   - Uniphier NAND, USB3 PHY, and SPI clk support
   - Qualcomm RPMh clk driver
   - i.MX7D mailbox clk support
   - Maxim 9485 Programmable Clock Generator
   - expose 32 kHz PLL on PXA SoCs
   - imx6sll GPIO clk gate support
   - Atmel at91 I2S audio clk support
   - SI544/SI514 clk on/off support
   - i.MX6UL GPIO clock gates in CCM CCGR
   - Renesas Crypto Engine clocks on R-Car H3
   - Renesas clk support for the new RZ/N1D SoC
   - Allwinner A64 display engine clock support
   - support for Rockchip's PX30 SoC
   - Amlogic Meson axg PCIe and audio clocks
   - Amlogic Meson GEN CLK on gxbb, gxl and axg

  Updates:
   - remove an unused variable from Exynos4412 ISP driver
   - fix a thinko bug in SCMI clk division logic
   - add missing of_node_put()s in some i.MX clk drivers
   - Tegra SDMMC clk jitter improvements with high speed signaling modes
   - SPDX tagging for qcom and cs2000-cp drivers
   - stop leaking con ids in __clk_put()
   - fix a corner case in fixed factor clk probing where node is in DT
     but parent clk is registered much later
   - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return
     value
   - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
   - convert to CLK_IS_CRITICAL for i.MX51/53 driver
   - fix Tegra BPMP driver oops when xlating a NULL clk
   - proper default configuration for vic03 and vde clks on Tegra124
   - mark Tegra memory controller clks as critical
   - fix array bounds clamp in Tegra's emc determine_rate() op
   - Ingenic i2s bit update and allow UDC clk to gate
   - fix name of aspeed SDC clk define to have only one 'CLK'
   - fix i.MX6QDL video clk parent
   - critical clk markings for qcom SDM845
   - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
   - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it
     supplying the pwm used to drive the logic supply of the rk3399
     core"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits)
  clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
  clk: cs2000-cp: convert to SPDX identifiers
  clk: scmi: Fix the rounding of clock rate
  clk: qcom: Add display clock controller driver for SDM845
  clk: mvebu: armada-37xx-periph: Remove unused var num_parents
  clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable
  clk: actions: Add S700 SoC clock support
  dt-bindings: clock: Add S700 support for Actions Semi Soc's
  clk: actions: Add missing REGMAP_MMIO dependency
  clk: uniphier: add clock frequency support for SPI
  clk: uniphier: add more USB3 PHY clocks
  clk: uniphier: add NAND 200MHz clock
  clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  clk: tegra: Add sdmmc mux divider clock
  clk: tegra: Refactor fractional divider calculation
  clk: tegra: Fix includes required by fence_udelay()
  clk: imx6sll: fix missing of_node_put()
  clk: imx6ul: fix missing of_node_put()
  clk: imx: add ocram_s clock for i.mx6sx
  clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
  ...
2018-08-15 21:41:21 -07:00
Joel Stanley 565b9937f4 clk: aspeed: Support HPLL strapping on ast2400
The HPLL can be configured through a register (SCU24), however some
platforms chose to configure it through the strapping settings and do
not use the register. This was not noticed as the logic for bit 18 in
SCU24 was confused: set means programmed, but the driver read it as set
means strapped.

This gives us the correct HPLL value on Palmetto systems, from which
most of the peripheral clocks are generated.

Fixes: 5eda5d79e4 ("clk: Add clock driver for ASPEED BMC SoCs")
Cc: stable@vger.kernel.org # v4.15
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-11 09:34:25 -07:00
Lei YU cd88259a72 clk: aspeed: Fix SDCLK name
The SDCLK was named SDCLKCLK, and no one has used this yet.
Fix it.

Signed-off-by: Lei YU <mine260309@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 13:56:06 -07:00
Joel Stanley 974c7c6d7b clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical
This is used by the host to talk to the BMC's PCIe slave device. The BMC
is not involved, but the clock needs to be enabled so the host can use
the device.

Fixes: 15ed8ce5f8 ("clk: aspeed: Register gated clocks")
Cc: stable@vger.kernel.org # 4.15
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 13:48:07 -07:00
Benjamin Herrenschmidt edc6f7e9b1 clk: aspeed: Treat a gate in reset as disabled
On some systems, we come out of the bootloader with some
gates set with the clock "enabled" but the reset also
asserted.

Since 8a53fc511c "clk: aspeed: Prevent reset if clock is enabled"
we check that enabled bit in aspeed_clk_enabled(), and do
nothing if already set.

This breaks when the above scenario occurs, as the clock
is enabled, but the reset still needs to be lifted.

This patch fixes it by also checking the reset bit (if any)
and treating a gate in "reset" as being disabled.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: 8a53fc511c "clk: aspeed: Prevent reset if clock is enabled"
Cc: Eddie James <eajames@linux.vnet.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 10:53:20 -07:00
Linus Torvalds 6419945e33 This time we have a good set of changes to the core framework that do some
general cleanups, but nothing too major. The majority of the diff goes to
 two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for
 Actions Semi so it takes up some lines to add all the different types, and
 the Qualcomm diff is there because we add support for two SoCs and it's quite
 a bit of data.
 
 Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And
 then the long tail of driver updates for various fixes and stuff follows
 after that.
 
 Core:
  - debugfs cleanups removing error checking and an unused provider API
  - Removal of a clk init typedef that isn't used
  - Usage of match_string() to simplify parent string name matching
  - OF clk helpers moved to their own file (linux/of_clk.h)
  - Make clk warnings more readable across kernel versions
 
 New Drivers:
  - Qualcomm SDM845 GCC and Video clk controllers
  - Qualcomm MSM8998 GCC
  - Actions Semi S900 SoC support
  - Nuvoton npcm750 microcontroller clks
  - Amlogic axg AO clock controller
 
 Removed Drivers:
  - Deprecated Rockchip clk-gate driver
 
 Updates:
  - debugfs functions stopped checking return values
  - Support for the MSIOF module clocks on Rensas R-Car M3-N
  - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
  - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
  - Berlin and Amlogic SPDX tagging
  - Usage of of_clk_get_parent_count() in more places
  - Proper implementation of the CDEV1/2 clocks on Tegra20
  - Allwinner H6 PRCM clock support and R40 EMAC support
  - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
  - Round closest support for meson's mpll driver
  - Support for meson8b nand clocks and gxbb video decoder clocks
  - Mediatek mali clks
  - STM32MP1 fixes
  - Uniphier LD11/LD20 stream demux system clock
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlsWxugACgkQrQKIl8bk
 lSVs2A/9HOMsWeiYx1MESrXw6N2UknWeqeT/b1v8L/VOiptJg+OTExPbzmSylngv
 AXJAfIkCpguSMh9b310pA3DAzk5docmbQ4zL977yY+KXmOcDooCd34aG5a+tB3ie
 ugC8T2bQLrJdMp3hsqaKZsYzqe7LoW2NJgoliXDMA/QUBLpvHq+fcu2zOawingTA
 GNc3LGqP5Op7p09aPK30gtQNqLK5qGpHASa/AY7Y0PXlUeTZ8rmF06fcEAg5shkC
 CT57Zy2rSFB2RorEJarYXDPLRHMw/jxXtpMVXEy7zuz/3ajvvRiZDHv75+NaBru9
 hDt1rzslzexEN4fYzj4AtGYRKyBrHbDaxG1qdIWPWVyoE0CEb+dZ1gH7/Ski5r+s
 z5D28NogC0T0sey6yWssyG3RLvkPJ5nxUhL++siHm1lbyo16LmhB1+nFvxrlzmBB
 0V1xqEa7feYpD+JD66lJFb5ornHLwGtVYBpeiY+hrDR3ddWEe1IxaYGR2p9nHwSS
 Us/ZQdHIYBVEqoo3+BWnTn+HSQzmd/sqHqWnLlVWUHoomm5nXx18PeS87vFbcPv9
 dMr+FFJ3Elubzcy5UZJPfNw+pb+teE7tYGQkQ3nbLRxT1YZOoIJZJDqNKxM1cgne
 6c/VXJMEyBBn/w7Iru/3eWCZVQJGlmYS47DFDzduFvd3LMfmKIM=
 =KK/v
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we have a good set of changes to the core framework that do
  some general cleanups, but nothing too major. The majority of the diff
  goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
  introduced for Actions Semi so it takes up some lines to add all the
  different types, and the Qualcomm diff is there because we add support
  for two SoCs and it's quite a bit of data.

  Otherwise the big driver updates are on TI Davinci and Amlogic
  platforms. And then the long tail of driver updates for various fixes
  and stuff follows after that.

  Core:
   - debugfs cleanups removing error checking and an unused provider API
   - Removal of a clk init typedef that isn't used
   - Usage of match_string() to simplify parent string name matching
   - OF clk helpers moved to their own file (linux/of_clk.h)
   - Make clk warnings more readable across kernel versions

  New Drivers:
   - Qualcomm SDM845 GCC and Video clk controllers
   - Qualcomm MSM8998 GCC
   - Actions Semi S900 SoC support
   - Nuvoton npcm750 microcontroller clks
   - Amlogic axg AO clock controller

  Removed Drivers:
   - Deprecated Rockchip clk-gate driver

  Updates:
   - debugfs functions stopped checking return values
   - Support for the MSIOF module clocks on Rensas R-Car M3-N
   - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
   - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
   - Berlin and Amlogic SPDX tagging
   - Usage of of_clk_get_parent_count() in more places
   - Proper implementation of the CDEV1/2 clocks on Tegra20
   - Allwinner H6 PRCM clock support and R40 EMAC support
   - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
   - Round closest support for meson's mpll driver
   - Support for meson8b nand clocks and gxbb video decoder clocks
   - Mediatek mali clks
   - STM32MP1 fixes
   - Uniphier LD11/LD20 stream demux system clock"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  clk: qcom: Export clk_fabia_pll_configure()
  clk: bcm: Update and add Stingray clock entries
  dt-bindings: clk: Update Stingray binding doc
  clk-si544: Properly round requested frequency to nearest match
  clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
  clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
  clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
  clk: ingenic: jz4770: Change OTG from custom to standard gated clock
  clk: ingenic: Support specifying "wait for clock stable" delay
  clk: ingenic: Add support for clocks whose gate bit is inverted
  clk: use match_string() helper
  clk: bcm2835: use match_string() helper
  clk: Return void from debug_init op
  clk: remove clk_debugfs_add_file()
  clk: tegra: no need to check return value of debugfs_create functions
  clk: davinci: no need to check return value of debugfs_create functions
  clk: bcm2835: no need to check return value of debugfs_create functions
  clk: no need to check return value of debugfs_create functions
  clk: imx6: add EPIT clock support
  clk: mvebu: use correct bit for 98DX3236 NAND
  ...
2018-06-09 12:06:24 -07:00
Kees Cook acafe7e302 treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:

// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
//                      sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06 11:15:43 -07:00
Stephen Boyd fff2e33717 Merge branches 'clk-imx6sx', 'clk-imx7d-enet' and 'clk-aspeed-24' into clk-next
* clk-imx6sx:
  clk: imx6sl: correct ocram_podf clock type
  clk: imx6sx: disable unnecessary clocks during clock initialization
  clk: imx6sx: add missing lvds2 clock to the clock tree

* clk-imx7d-enet:
  ARM: dts: imx7: correct enet ipg clock
  clk: imx7d: correct enet clock CCGR registers
  clk: imx7d: correct enet phy ref clock gates

* clk-aspeed-24:
  clk: aspeed: Add 24MHz fixed clock
2018-06-04 12:32:24 -07:00
Lei YU 67b6e5cfdb clk: aspeed: Add 24MHz fixed clock
Add a 24MHz fixed clock.
This clock will be used for certain devices, e.g. pwm.

Signed-off-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 12:18:42 -07:00
Jae Hyun Yoo e76e56823a clk:aspeed: Fix reset bits for PCI/VGA and PECI
This commit fixes incorrect setting of reset bits for PCI/VGA and
PECI modules.

1. Reset bit for PCI/VGA is 8.
2. PECI reset bit is missing so added bit 10 as its reset bit.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Fixes: 15ed8ce5f8 ("clk: aspeed: Register gated clocks")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15 15:02:23 -07:00
Joel Stanley dcb899c47d clk: aspeed: Support second reset register
The ast2500 has an additional reset register that contains resets not
present in the ast2400. This enables support for this register, and adds
the one reset line that is controlled by it.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15 14:59:35 -07:00
Eddie James 8a53fc511c clk: aspeed: Prevent reset if clock is enabled
According to the Aspeed specification, the reset and enable sequence
should be done when the clock is stopped. The specification doesn't
define behavior if the reset is done while the clock is enabled.

From testing on the AST2500, the LPC Controller has problems if the
clock is reset while enabled.

Therefore, check whether the clock is enabled or not before performing
the reset and enable sequence in the Aspeed clock driver.

Reported-by: Lei Yu <mine260309@gmail.com>
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Fixes: 15ed8ce5f8 ("clk: aspeed: Register gated clocks")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-15 11:13:49 -07:00
Eddie James d90c76bb61 clk: aspeed: Fix is_enabled for certain clocks
Some of the Aspeed clocks are disabled by setting the relevant bit in
the "clock stop control" register to one, while others are disabled by
setting their bit to zero. The driver already uses a flag per gate  to
identify this behavior, but doesn't apply it in the clock is_enabled
function.

Use the existing gate flag to correctly return whether or not a clock
is enabled in the aspeed_clk_is_enabled function.

Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Fixes: 6671507f0f ("clk: aspeed: Handle inverse polarity of USB port 1 clock gate")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-15 11:11:43 -07:00
Benjamin Herrenschmidt 6671507f0f clk: aspeed: Handle inverse polarity of USB port 1 clock gate
The USB port 1 clock gate control has an inversed polarity
from all the other clock gates in the chip. This makes the
aspeed_clk_{enable,disable} functions honor the flag
CLK_GATE_SET_TO_DISABLE and set that flag appropriately
so it's set for all clocks except USB port 1.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26 16:22:48 -08:00
Wei Yongjun accf475a5e clk: aspeed: Fix return value check in aspeed_cc_init()
In case of error, the function of_iomap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: a2e230c7b2ea ("clk: Add clock driver for ASPEED BMC SoCs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26 16:22:48 -08:00
Joel Stanley f798983982 clk: aspeed: Add reset controller
There are some resets that are not associated with gates. These are
represented by a reset controller.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26 16:22:46 -08:00
Joel Stanley 15ed8ce5f8 clk: aspeed: Register gated clocks
The majority of the clocks in the system are gates paired with a reset
controller that holds the IP in reset.

This borrows from clk_hw_register_gate, but registers two 'gates', one
to control the clock enable register and the other to control the reset
IP. This allows us to enforce the ordering:

 1. Place IP in reset
 2. Enable clock
 3. Delay
 4. Release reset

There are some gates that do not have an associated reset; these are
handled by using -1 as the index for the reset.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26 16:22:45 -08:00
Joel Stanley 98f3118deb clk: aspeed: Add platform driver and register PLLs
This registers a platform driver to set up all of the non-core clocks.

The clocks that have configurable rates are now registered.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26 16:22:43 -08:00
Joel Stanley 99d01e0ec3 clk: aspeed: Register core clocks
This registers the core clocks; those which are required to calculate
the rate of the timer peripheral so the system can load a clocksource
driver.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26 16:22:41 -08:00
Joel Stanley 5eda5d79e4 clk: Add clock driver for ASPEED BMC SoCs
This adds the stub of a driver for the ASPEED SoCs. The clocks are
defined and the static registration is set up.

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-26 16:22:37 -08:00