Commit Graph

20 Commits

Author SHA1 Message Date
Marek Szyprowski 4a4a87146a extcon: max77843: Add support for SmartDock accessory
SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following
features:
1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc,
2. MHL for video output,
3. charging.

Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-24 09:48:54 +09:00
Marek Szyprowski 7b9651103b extcon: max77843: Add OTG power control to the MUIC driver
Enabling power on VBUS micro-usb pin is required only when passive OTG
cable is connected. Initially OTG VBUS power control was planned to be
done in charger driver. However such information is not really available
from the extcon notifications, so VBUS power control has to be done
directly in MUIC driver, which has all information about the attached
accessory.

For example SmartDock is externally powered accessory, provides OTG
(USB HOST) functionality and use VBUS pin for charging a device battery,
so the VBUS charging pump should be disabled in such case.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-24 09:48:40 +09:00
Chanwoo Choi 176aa36012 extcon: Split out extcon header file for consumer and provider device
The extcon has two type of extcon devices as following.
- 'extcon provider deivce' adds new extcon device and detect the
   state/properties of external connector. Also, it notifies the
   state/properties to the extcon consumer device.
- 'extcon consumer device' gets the change state/properties
   from extcon provider device.
Prior to that, include/linux/extcon.h contains all exported API for
both provider and consumer device driver. To clarify the meaning of
header file and to remove the wrong use-case on consumer device,
this patch separates into extcon.h and extcon-provider.h.

[Description for include/linux/{extcon.h|extcon-provider.h}]
- extcon.h includes the extcon API and data structure for extcon consumer
  device driver. This header file contains the following APIs:
  : Register/unregister the notifier to catch the change of extcon device
  : Get the extcon device instance
  : Get the extcon device name
  : Get the state of each external connector
  : Get the property value of each external connector
  : Get the property capability of each external connector

- extcon-provider.h includes the extcon API and data structure for extcon
  provider device driver. This header file contains the following APIs:
  : Include 'include/linux/extcon.h'
  : Allocate the memory for extcon device instance
  : Register/unregister extcon device
  : Set the state of each external connector
  : Set the property value of each external connector
  : Set the property capability of each external connector

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23 14:07:58 +09:00
Srikant Ritolia af57fa4de2 extcon: Restructure multi-line comments to follow codingstyle
Aligning all block comments in extcon subsystem as per linux coding style.
Found using checkpatch.pl script.

Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-01-09 10:04:09 +09:00
Chanwoo Choi 8670b45980 extcon: Use the extcon_set_state_sync() instead of deprecated functions
This patch alters the renamed extcon API to set the state of the external
connectors instead of deprecated extcon_set_cable_state_().

Because the patch[1] modifies the function name to maintain the function
naming pattern.
- extcon_set_cable_state_() -> extcon_set_state_sync()
- extcon_get_cable_state_() -> extcon_get_state()

[1] https://lkml.org/lkml/2016/8/4/729
- extcon: Rename the extcon_set/get_state() to maintain the function naming pattern

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Roger Quadros <rogerq@ti.com>
2016-09-13 11:26:26 +09:00
Dan Carpenter c4924e9244 extcon: max77843: Use correct size for reading the interrupt register
The info->status[] array has 3 elements.  We are using size
MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as
intended.

Fixes: 135d9f7d13 ('extcon: max77843: Clear IRQ bits state before request IRQ')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[cw00.choi: Modify the patch title]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-02-05 11:37:26 +09:00
Chanwoo Choi 8b45b6a074 extcon: Add the EXTCON_CHG_USB_SDP to support SDP charing port
This patch adds the new EXTCON_CHG_USB_SDP connector to support SDP (Standard
Downstream Port) USB charging port. The commit 11eecf910b ("extcon: Modify
the id and name of external connector") add the new EXTCON_CHG_USB_SDP
connector which support the both data transfer and usb charging at the same
time.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25 13:16:53 +09:00
Andrzej Hajda c05c0d544e extcon: max77843: fix handling return value of regmap_irq_get_virq
The function can return negative values, so its result should
be assigned to signed variable.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15 10:02:34 +09:00
Chanwoo Choi 11eecf910b extcon: Modify the id and name of external connector
This patch modifies the id and name of external connector with the
additional prefix to clarify both attribute and meaning of external
connector as following:
- EXTCON_CHG_* mean the charger connector.
- EXTCON_JACK_* mean the jack connector.
- EXTCON_DISP_* mean the display port connector.

Following table show the new name of external connector with old name:
--------------------------------------------------
Old extcon name         | New extcon name        |
--------------------------------------------------
EXTCON_TA               | EXTCON_CHG_USB_DCP     |
EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP     |
EXTCON_FAST_CHARGER     | EXTCON_CHG_USB_FAST    |
EXTCON_SLOW_CHARGER     | EXTCON_CHG_USB_SLOW    |
--------------------------------------------------
EXTCON_MICROPHONE       | EXTCON_JACK_MICROPHONE |
EXTCON_HEADPHONE        | EXTCON_JACK_HEADPHONE  |
EXTCON_LINE_IN          | EXTCON_JACK_LINE_IN    |
EXTCON_LINE_OUT         | EXTCON_JACK_LINE_OUT   |
EXTCON_VIDEO_IN         | EXTCON_JACK_VIDEO_IN   |
EXTCON_VIDEO_OUT        | EXTCON_JACK_VIDEO_OUT  |
EXTCON_SPDIF_IN         | EXTCON_JACK_SPDIF_IN   |
EXTCON_SPDIF_OUT        | EXTCON_JACK_SPDIF_OUT  |
--------------------------------------------------
EXTCON_HMDI             | EXTCON_DISP_HDMI       |
EXTCON_MHL              | EXTCON_DISP_MHL        |
EXTCON_DVI              | EXTCON_DISP_DVI        |
EXTCON_VGA              | EXTCON_DISP_VGA        |
--------------------------------------------------

And, when altering the name of USB charger connector, EXTCON refers to the
"Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard
name of USB charging port as following. Following name of USB charging port
are already used in power_supply subsystem. We chan check it on patch[2].
- EXTCON_CHG_USB_SDP	/* Standard Downstream Port */
- EXTCON_CHG_USB_DCP	/* Dedicated Charging Port */
- EXTCON_CHG_USB_CDP	/* Charging Downstream Port */
- EXTCON_CHG_USB_ACA	/* Accessory Charger Adapter */

[1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip
[2] commit 85efc8a18c ("power_supply: Add types for USB chargers")

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ckeepax: For the Arizona changes]
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-10-16 08:30:09 +09:00
Linus Torvalds cf9d615f7f regulator: Updates for v4.3
The biggest changes in the core this time around have been some
 refactorings that move us towards being able to drop the list of
 regulators maintained by the core and instead just use the driver model
 list maintained for the class devices for regulators which will make the
 code smaller and avoid some potential bugs.  Otherwise another fairly
 quiet release for the regulator API, highlights include:
 
  - A new API for setting voltages based on a minimum, target, maximum
    triplet.
  - Support for continuous voltage ranges rather than tables of explicit
    steps in the PWM regulator, requiring less explicit configuration.
  - New driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
    and Qualcomm RPM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV5DCWAAoJECTWi3JdVIfQDgYH/3mNwtRcwslt8M1L8lzRVyf1
 gRrJY5r4EUOcqqsLnQvDHdjgO2yowEolEd3Hd/GElZqzeFgwXaQ62kHwgqnvOt9k
 O0l99FbU6ECpB56tSENrV1lfvBTlld9bEhq9NhxvNiWAdpGPqIcjvXfSH28GssJ0
 NGr4Yt/A1DG6GsOWxKSODX56WJXJn4emKx3vHH+leUClNWwQVK6JunTmj5IPKLxW
 K94Ke41L3JgAy18TLqvFNlTAC22QaHFaM8ul9v7gnPW+S8Bx15MCQz16rMkGViZV
 c/DyCu69qCVFLI1svRrvB5oq700QT0GT6jANCVmw+CrkIkESwjS39kX861H6hk8=
 =vrVx
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest changes in the core this time around have been some
  refactorings that move us towards being able to drop the list of
  regulators maintained by the core and instead just use the driver
  model list maintained for the class devices for regulators which will
  make the code smaller and avoid some potential bugs.

  Otherwise another fairly quiet release for the regulator API,
  highlights include:

   - a new API for setting voltages based on a minimum, target, maximum
     triplet

   - support for continuous voltage ranges rather than tables of
     explicit steps in the PWM regulator, requiring less explicit
     configuration

   - new driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
     and Qualcomm RPM"

* tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
  regulator: mt6311: fix platform_no_drv_owner.cocci warnings
  regulator: ltc3589: Remove unnecessary MODULE_ALIAS()
  regulator: ad5398: Remove unnecessary MODULE_ALIAS()
  regulator: pfuze100: Remove unnecessary MODULE_ALIAS()
  regulator: core: use debug level print in regulator_check_drms
  regulator: lp872x: handle error case
  regulator: lp872x: use the private data instead of updating I2C device platform data
  regulator: isl9305: Export OF module alias information
  regulators: max77693: register driver earlier to avoid deferred probe
  regulator: qcom_smd: Set n_voltages for pm8941_lnldo
  regulator: core: Use IS_ERR_OR_NULL()
  regulator: core: Define regulator_set_voltage_triplet()
  regulator: Regulator driver for the Qualcomm RPM
  regulator: pbias: Fix broken pbias disable functionality
  regulator: core: Spelling fix
  regulator: core: Use class device list for regulator_list in late init
  regulator: core: Move more deallocation into class unregister
  regulator: core: Reduce rdev locking region when releasing regulator
  Input: Remove the max77843 haptic driver
  Input: max77693: Add support for Maxim 77843
  ...
2015-08-31 15:49:19 -07:00
Jaewon Kim 135d9f7d13 extcon: max77843: Clear IRQ bits state before request IRQ
IRQ signal before driver probe is needless because driver sends
current state after platform booting done.
So, this patch clears MUIC IRQ bits before request IRQ.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-08-10 11:48:54 +09:00
Krzysztof Kozlowski 309a3e00a5 mfd/extcon: max77843: Rename defines to allow inclusion with max77693
Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon
driver so the max77693-private.h can be included simultaneously with
max77843-private.h.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 21:39:30 +01:00
Krzysztof Kozlowski bc1aadc186 drivers: max77843: Switch to common max77693 state container
Switch to the same definition of state container as in MAX77693 drivers.
This will allow usage of one regulator driver in both devices: MAX77693
and MAX77843.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 21:39:30 +01:00
Chanwoo Choi 73b6ecdb93 extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
This patch just redefine the unique id of supported external connectors without
'enum extcon' type. Because unique id would be used on devictree file(*.dts) to
indicate the specific external connectors like key number of input framework.
So, I have the plan to move this definitions to following header file which
includes the unique id of supported external connectors.
- include/dt-bindings/extcon/extcon.h

Fixes: 2a9de9c0f0 ("extcon: Use the unique id for external connector instead of string")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12 17:01:42 -07:00
Chanwoo Choi 2a9de9c0f0 extcon: Use the unique id for external connector instead of string
This patch uses the unique id to identify the type of external connector instead
of string name. The string name have the many potential issues. So, this patch
defines the 'extcon' enumeration which includes all supported external connector
on EXTCON subsystem. If new external connector is necessary, the unique id of
new connector have to be added in 'extcon' enumeration. There are current
supported external connector in 'enum extcon' as following:

enum extcon {
	EXTCON_NONE		= 0x0,

	/* USB external connector */
	EXTCON_USB		= 0x1,
	EXTCON_USB_HOST		= 0x2,

	/* Charger external connector */
	EXTCON_TA		= 0x10,
	EXTCON_FAST_CHARGER	= 0x11,
	EXTCON_SLOW_CHARGER	= 0x12,
	EXTCON_CHARGE_DOWNSTREAM = 0x13,

	/* Audio and video external connector */
	EXTCON_LINE_IN		= 0x20,
	EXTCON_LINE_OUT		= 0x21,
	EXTCON_MICROPHONE	= 0x22,
	EXTCON_HEADPHONE	= 0x23,

	EXTCON_HDMI		= 0x30,
	EXTCON_MHL		= 0x31,
	EXTCON_DVI		= 0x32,
	EXTCON_VGA		= 0x33,
	EXTCON_SPDIF_IN		= 0x34,
	EXTCON_SPDIF_OUT	= 0x35,
	EXTCON_VIDEO_IN		= 0x36,
	EXTCON_VIDEO_OUT	= 0x37,

	/* Miscellaneous external connector */
	EXTCON_DOCK		= 0x50,
	EXTCON_JIG		= 0x51,
	EXTCON_MECHANICAL	= 0x52,

	EXTCON_END,
};

For example in extcon-arizona.c:
To use unique id removes the potential issue about handling
the inconsistent name of external connector with string.
- Previously, use the string to register the type of arizona jack connector
static const char *arizona_cable[] = {
	"Mechanical",
	"Microphone",
	"Headphone",
	"Line-out",
};
- Newly, use the unique id to register the type of arizona jack connector
static const enum extcon arizona_cable[] = {
	EXTCON_MECHANICAL,
	EXTCON_MICROPHONE,
	EXTCON_HEADPHONE,
	EXTCON_LINE_OUT,

	EXTCON_NONE,
};

And this patch modify the prototype of extcon_{get|set}_cable_state_() which
uses the 'enum extcon id' instead of 'cable_index'. Because although one more
extcon drivers support USB cable, each extcon driver might has the differnt
'cable_index' for USB cable. All extcon drivers can use the unique id number
for same external connector with modified extcon_{get|set}_cable_state_().

- Previously, use 'cable_index' on these functions:
extcon_get_cable_state_(struct extcon_dev*, int cable_index)
extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state)

-Newly, use 'enum extcon id' on these functions:
extcon_get_cable_state_(struct extcon_dev*, enum extcon id)
extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state)

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the
unique id for external connector insteadf of string]
Reported-by: Arnd Bergmann <arnd@arndb.de>
[dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-05-22 18:58:44 +09:00
Chanwoo Choi 942e0239d5 extcon: Alter MHL-TA cable name to TA cable name
This patch alters the MHL-TA cable name to TA cable name because MHL-TA is not
standard name. The MHL-TA is MHL cable with charger cable (TA or USB). So, this
patch use the TA cable instead of MHL-TA to inform the charger cable state.
- MHL-TA -> TA

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-05-19 16:39:06 +09:00
Chanwoo Choi 41b3c0154c extcon: Unify the jig cable names on rt8973 and max14577/77693/77843
This patch change the name of various jig cables as 'JIG' because the name of
various jig cables are strange and ambiguous on user-space aspect. They include
the different information of either USB and UART state. It is never important
for user-space process. This patch unifies the name of jig cables as following:
- JIG-USB-ON   -->|--> JIG
- JIG-USB-OFF  -->|
- JIG-UART-ON  -->|
- JIG-UART-OFF -->|

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19 16:39:05 +09:00
Dan Carpenter b9b518f539 extcon: max77843: Fix an error code in max77843_init_muic_regmap()
The i2c_new_dummy() return the NULL if error happen. So, If i2c_new_dummy()
return NULL, max77843_init_muic_regmap() return the proper error value
(-ENOMEM);

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[cw00.choi: Use -ENOMEM instead of -ENODEV and modify patch description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-23 10:50:27 +09:00
Dan Carpenter d927c59076 extcon: max77843: Fix signedness bug in max77843_muic_set_debounce_time()
This patch fixes the variable type of 'ret' from 'unsigned int' to 'int' type
because the return type of regmap_update_bits() is 'int' type.

Fixes: 27a28d32b4 ('extcon: max77843: Add max77843 MUIC driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[cw00.choi: Fix the patch description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-16 13:15:00 +09:00
Jaewon Kim 27a28d32b4 extcon: max77843: Add max77843 MUIC driver
This patch adds MAX77843 extcon driver to support for MUIC(Micro
USB Interface Controller) device by using EXTCON subsystem to handle
various external connectors.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-02-24 09:00:54 +09:00