Removing frame_len and frame_size from function declarations
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixing need_ack to u8 and removing from function declarations.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver needs to do anything special for channel switch.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ldBmThreshold was used in old function s_vCheckSensitivity which
had been disabled in orginal vendors code.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing type prefix and camel case
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing type prefix and camel case
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same name as in struct ieee80211_bss_conf
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although set these variables are not used.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwTxAntennaSel is always the same as dwRxAntennaSel
byAntennaCount is never used.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zone types are nolonger handled by driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When radio is off bit GPIO3_INTMD should be on and off when radio is on.
Add these to the tail of vnt_radio_power_off and vnt_radio_power_on
and remove variable bHWRadioOff.
In device_init_registers just check GPIO3_DATA are in correct state and
always power on.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable flips from true to false but does nothing
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These frequencies are already defined in new tables channel.c
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All these functions are in visibility order.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All these module parameters are dead
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace with vnt_tx_buffers using module_param_named and
MODULE_PARM_DESC
Check user doe not set tx_buffer beyond the define limits of driver
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace with vnt_rx_buffers using module_param_named and
MODULE_PARM_DESC
Check user doe not set rx_buffer beyond the define limits of driver
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All dead code and nolonger used by driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a checkpatch warning by replacing printk
by dev_warn. Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes uneeded typedefs reported by chackpatch and removes
one enum that is not in use. As checkpatch complained about the typedef
and the enum is not being used, this patch removes both typedef and enum.
The removed enum from card.h:
typedef enum _CARD_PHY_TYPE {
PHY_TYPE_AUTO = 0,
PHY_TYPE_11B,
PHY_TYPE_11G,
PHY_TYPE_11A
} CARD_PHY_TYPE, *PCARD_PHY_TYPE;
The following typedefs were removed, but enums were kept at device.h:
typedef enum __device_msg_level
typedef enum __DEVICE_NDIS_STATUS
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleanup the follwoing coding style issues:
- indentation style
- new line after declaration
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleanup the follwoing coding style issues:
- line over 80 chars
- spaces on the beginning of a line
- put { and } on the correct places
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use tabs instead of spaces in a set of statements and fix lines
over 80 chars. Reported by checkpatch.
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All these have no or vague meaning.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function just submits to rx urbs.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop Read and PIPE. The function starts the interrupt urb.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function does not directly poll from here
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function does run as work item, it starts interrupts from the
device.
Rename to vnt_int_start_interrupt
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleanup a checkpatch warning by removing double parentheses
from if condition. Additionally it fixes a line over 80 chars.
Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BBvSetAntennaMode is not set at all, set to byRxAntennaMode
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since enum vnt_cmd is only member replace with array
enum vnt_cmd cmd_queue with size of CMD_Q_SIZE
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
named comments are already referenced in revision history
in high-level comment.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rf register always have *_REG_LEN and IFREGCTL_REGW macros added.
*_REG_LEN is always 23(0x17) replace them with VNT_RF_REG_LEN.
Remove *_REG_LEN and IFREGCTL_REGW from tables and vnt_rf_set_txpower and
apply VNT_RF_REG_LEN and IFREGCTL_REGW in vnt_rf_write_embedded
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove comments to channel number execpt where there is a
change to 5gHz channel 15
named comments are already referenced in revision history
in high-level comment.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WLAN_CMD_CHANGE_BBSENSITIVITY and WLAN_CMD_MAC_DISPOWERSAVING
are already implemented and don't need the command timer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Part of it has already been removed. checking isr1 & ISR_GPIO3
serves no purpose.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
patch 'vnt_set_keymode don't save pairwise key entry' caused
a slight regression in access point mode
Only don't save in station mode.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default is that all the channels are enabled for rf types
not mentioned here.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
all functions are in visibility order.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop data and the function always returns little endian
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function returns out at if statements so drop else.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add rts positions from s_vFillRTSHead
add need_mic and remaining union vnt_tx_data_head head positions from
s_vGenerateTxParameter for packet type PK_TYPE_11A and PK_TYPE_11B..
As there are no other possibilities for packet types in s_vGenerateTxParameter
the if becomes else.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add need_mic and union vnt_tx_data_head head positions from s_vGenerateTxParameter.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add to vnt_rxtx_rts calls from s_vFillRTSHead.
add need_mic and union vnt_tx_data_head head positions from s_vGenerateTxParameter.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
create new function vnt_rxtx_ab which will eventually carry onward
functions
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use byPktType instead of macro.
The pkt_type has already been filtered in this function so its always set
to the correct one.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create new function vnt_rxtx_cts that will eventually carry onward
function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Creat new function vnt_rxtx_rts that will eventually carry onward
functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace fb_option in function calls with tx_context->fb_option.
Namely functions s_vFillCTSHead and s_vFillRTSHead
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ethhdr is nolonger used by driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The latest vendor code makes changes to uSIFS and uDIFS.
The orginal codes have been rearranged into a fall through switch
statement.
These reduce the time that device allows to TX packets and
improves throughput.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device refuses to associate to older access points even though in
the logs it appears to be associated in tkip or ccmp mode.
Clear bit from key_entry_inuse in pairwise key so the entry is over written
by group address.
This doesn't seem to make any difference to newer access points and
is a temporary fix until a better solution is found.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_push the headroom and trimmed back to 0
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver reports the rate tried in struct vnt_interrupt_data tsr* variables
which is available in INTnsProcessData via interrupt urb context.
Instead of closing apTD tx context in s_nsBulkOutIoCompleteWrite by setting
in_use to false. Keep the context open and allow vnt_int_report_rate to
close it.
If the tx_retry value is correct it will report back the sucessful RATE tried.
struct vnt_usb_send_context add pkt_no which is index of apTD
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Power setting is already done in vnt_config and vnt_tx_packet.
Just check that for connection_channel, if invalid return.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changing channel is so fast when off channel that changing power is pointless.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The byCurPwr value can change state while in another thread,.
Change to local variable power which is the last set value.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn the radio off to save power is the device is unused
on system.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On 2GHz band the values of wCurrentRate match the idx rates.
However, on 5GHz they do not because in channel.c vnt_rates_a do not
match idx.
Instead use the info->control.rates[0].idx the value that was tried.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver already report low_level_stats via vnt_interrupt_data.
Allow mac80211 to collect them via vnt_get_stats
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move to vnt_add_interface and allow to refresh at the start
of every software scan in vnt_sw_scan_start
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vnt_set_bss_mode changes the state of abyBBVGA so move
BBvSetVGAGainOffset to the function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver never sets basic rate any more so remove function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In s_nsBulkInUsbIoCompleteRead reuse or reallocate sb_buff and resubmit
urb.
In device_alloc_bufs allocate memory to rcb individually and
call PIPEnsBulkInUsbRead to submit the urbs
Change handling to free rcb in device_free_rx_bufs
Remove calls to workqueue.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is assigned later in function and should have been removed in
an out-of-tree merge.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use base type to __le16 and do endian correction.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace with ccmp_pn with size of IEEE80211_CCMP_PN_LEN(6)
memcpy the struct ieee80211_key_seq -> ccmp.pn onto ccmp_pn
removing the need for endian conversion.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove all variables that are dead with this header
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley
Peter Senna Tschudin