Commit Graph

147 Commits

Author SHA1 Message Date
Colin Ian King b2fc059fa5 usb: gadget: don't dereference g until after it has been null checked
Avoid dereferencing pointer g until after g has been sanity null checked;
move the assignment of cdev much later when it is required into a more
local scope.

Detected by CoverityScan, CID#1222135 ("Dereference before null check")

Fixes: b785ea7ce6 ("usb: gadget: composite: fix ep->maxburst initialization")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-28 13:04:50 +02:00
Greg Kroah-Hartman e79bfcb795 USB: gadget: Remove redundant license text
Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner.  So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07 15:45:02 +01:00
Greg Kroah-Hartman 5fd54ace47 USB: add SPDX identifiers to all remaining files in drivers/usb/
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04 11:48:02 +01:00
Gustavo A. R. Silva 624916a950 usb: gadget: composite: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 16:57:22 +01:00
Andrew Gabbasov aec17e1e24 usb: gadget: composite: Fix use-after-free in usb_composite_overwrite_options
KASAN enabled configuration reports an error

    BUG: KASAN: use-after-free in usb_composite_overwrite_options+...
                [libcomposite] at addr ...
    Read of size 1 by task ...

when some driver is un-bound and then bound again.
For example, this happens with FunctionFS driver when "ffs-test"
test application is run several times in a row.

If the driver has empty manufacturer ID string in initial static data,
it is then replaced with generated string. After driver unbinding
the generated string is freed, but the driver data still keep that
pointer. And if the driver is then bound again, that pointer
is re-used for string emptiness check.

The fix is to clean up the driver string data upon its unbinding
to drop the pointer to freed memory.

Fixes: cc2683c318 ("usb: gadget: Provide a default implementation of default manufacturer string")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-11 13:14:30 +03:00
Greg Kroah-Hartman 24040a5837 usb: changes for v4.13 merge window
This time around we have a total of 57 non-merge commits. A list of
 most important changes follows:
 
 - Improvements to dwc3 tracing interface
 - Initial dual-role support for dwc3
 - Improvements to how we handle DMA resources in dwc3
 - A new f_uac1 implementation which much more flexible
 - Removal of AVR32 bits
 - Improvements to f_mass_storage driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCAA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAllHcK0dHGZlbGlwZS5i
 YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQbRQQ//as9W89twbmwOqaSU
 pXlbR/gmmEjD6POLWM2GuG3jH8oD3pQq7ZxH22YEFx8Z4wN7vPJ67JJkyoSfhAui
 ppnp6AbSPiNolZRb5nTnASnq0cJiTE/rbSM5s1wpe+Qa3ZoQgTHhipnL1/qf8SgR
 PN1wgUTGeXxiIA00iOYTG2pjM+OvFO5UpqFJCfh4vuEjcdBWvHDXTUwga5G+qwIa
 pgNECcmUsXmHimp6jE+qLUhRYOqvTEC+lc9nzZj4MCru3PDEhZYuOah0XrepiNKU
 NB49DVMtDwaGXrKPwa6rNWD8JZF0CAsShvO6V/2p1peInJZUuIrEjXYRUlkPQt9G
 yLzxBS+asLCBauzxBFNPrR2BFfJ2uyUCLHYiKP2UbRfWCBFo84MDJCUWACL1aKCH
 YLeM1Q7Urxp5suirr2UmwBJdUxXNTncEXsKrtGcrNndKt/Uq8/DxcrbZ2/6ANTDT
 wdzm8gSSjtQaFLRc5KgAqrX/ClfEDgQwfgq0DXn9cKxZ9E9xID45s71feKEoBI42
 6S/oAopSuBsEmTsPTy0WLR8MTJG3MoJAdr/mHau11Tl0k9qr9KKnHbdUjji9CF6E
 aGcV40nKqp9Bd4bcbCNB6NsJUB+zcN7t0bjTsPZQH3XOCSS+fF7oJ6+SIxhsKAFT
 rHRl6RhLOIP0vZ0UIsDzeDttCVM=
 =v6a5
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing

Felipe writes:

usb: changes for v4.13 merge window

This time around we have a total of 57 non-merge commits. A list of
most important changes follows:

- Improvements to dwc3 tracing interface
- Initial dual-role support for dwc3
- Improvements to how we handle DMA resources in dwc3
- A new f_uac1 implementation which much more flexible
- Removal of AVR32 bits
- Improvements to f_mass_storage driver
2017-06-20 11:39:34 +08:00
Felipe Balbi 0e3e97526a usb: gadget: composite: make sure to reactivate function on unbind
If a function sets bind_deactivated flag, upon removal we will be left
with an unbalanced deactivation. Let's make sure that we conditionally
call usb_function_activate() from usb_remove_function() and make sure
usb_remove_function() is called from remove_config().

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-06 14:50:54 +03:00
John Youn a9548c5529 usb: gadget: Allow a non-SuperSpeed gadget to support LPM
This commit allows a gadget that does not support SuperSpeed to indicate
that it supports LPM. It does this by setting the 'lpm_capable' flag in
the gadget structure.

If a gadget sets this, the composite gadget framework will set the
bcdUSB to 0x0201 to indicate that this supports BOS descriptors, and
also return a USB 2.0 Extension descriptor as part of the BOS descriptor
set.

See USB 2.0 LPM ECN Section 3.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-02 11:22:32 +03:00
John Youn 0b67a6be14 usb: gadget: composite: Exclude SS Dev Cap Desc
Don't send the SuperSpeed USB Device Capability descriptor if
the gadget is not capable of SuperSpeed.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-02 11:22:32 +03:00
Christophe JAILLET 990758c53e usb: gadget: composite: Fix function used to free memory
'cdev->os_desc_req' has been allocated with 'usb_ep_alloc_request()' so
'usb_ep_free_request()' should be used to free it.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-12 09:58:05 +02:00
Krzysztof Opasiak 7e4da3fcf7 usb: gadget: composite: Test get_alt() presence instead of set_alt()
By convention (according to doc) if function does not provide
get_alt() callback composite framework should assume that it has only
altsetting 0 and should respond with error if host tries to set
other one.

After commit dd4dff8b03 ("USB: composite: Fix bug: should test
set_alt function pointer before use it")
we started checking set_alt() callback instead of get_alt().
This check is useless as we check if set_alt() is set inside
usb_add_function() and fail if it's NULL.

Let's fix this check and move comment about why we check the get
method instead of set a little bit closer to prevent future false
fixes.

Fixes: dd4dff8b03 ("USB: composite: Fix bug: should test set_alt function pointer before use it")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02 10:55:28 +02:00
Juergen Gross 5002c93135 usb: gadget: composite: use kasprintf() instead of open coding it
Let's not reimplement generic kernel helpers,
instead call kasprintf().

[ felipe.balbi@linux.intel.com: better commit log ]

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03 10:38:36 +02:00
Felipe Balbi 9ad587710a usb: gadget: composite: remove unnecessary & operation
Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we can remove the &
operation from this driver.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03 10:38:24 +02:00
Felipe Balbi eaa496ffaa usb: gadget: composite: always set ep->mult to a sensible value
ep->mult is supposed to be set to Isochronous and
Interrupt Endapoint's multiplier value. This value
is computed from different places depending on the
link speed.

If we're dealing with HighSpeed, then it's part of
bits [12:11] of wMaxPacketSize. This case wasn't
taken into consideration before.

While at that, also make sure the ep->mult defaults
to one so drivers can use it unconditionally and
assume they'll never multiply ep->maxpacket to zero.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-31 11:15:33 +02:00
Felipe Balbi e8f29bb719 usb: gadget: composite: correctly initialize ep->maxpacket
usb_endpoint_maxp() returns wMaxPacketSize in its
raw form. Without taking into consideration that it
also contains other bits reserved for isochronous
endpoints.

This patch fixes one occasion where this is a
problem by making sure that we initialize
ep->maxpacket only with lower 10 bits of the value
returned by usb_endpoint_maxp(). Note that seperate
patches will be necessary to audit all call sites of
usb_endpoint_maxp() and make sure that
usb_endpoint_maxp() only returns lower 10 bits of
wMaxPacketSize.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-31 11:15:33 +02:00
Felix Hädicke 1a00b457a5 usb: gadget: composite: let USB functions process ctrl reqs in cfg0
It can sometimes be necessary for gadget drivers to process non-standard
control requests, which host devices can send without having sent
USB_REQ_SET_CONFIGURATION.

Therefore, the req_match() usb_function method is enhanced with the new
parameter "config0". When a USB configuration is active, this parameter
is false. When a non-core control request is processed in
composite_setup(), without an active configuration, req_match() of the
USB functions of all available configurations which implement this
function, is called with config0=true. Then the control request gets
processed by the first usb_function instance whose req_match() returns
true.

Signed-off-by: Felix Hädicke <felixhaedicke@web.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25 12:13:17 +03:00
Christophe JAILLET 3887db5c2b usb: gadget: composite: Fix return value in case of error
In 'composite_os_desc_req_prepare', if one of the memory allocations fail,
0 will be returned, which means success.
We should return -ENOMEM instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-11 15:09:46 +03:00
Peter Chen c526c62d56 usb: gadget: composite: fix dereference after null check coverify warning
cdev->config is checked for null pointer at above code, so cdev->config
might be null, fix it by adding null pointer check.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-11 15:09:44 +03:00
William Wu 7e14f47a55 usb: gadget: composite: don't queue OS desc req if length is invalid
In OS descriptors handling, if ctrl->bRequestType is
USB_RECIP_DEVICE and w_index != 0x4 or (w_value >> 8)
is true, it will not assign a valid value to req->length,
but use the default value(-EOPNOTSUPP), and queue an
OS desc request with the invalid req->length. It always
happens on the platforms which use os_desc (for example:
rk3366, rk3399), and cause kernel panic as follows
(use dwc3 driver):

Unable to handle kernel paging request at virtual address ffffffc0f7e00000
Internal error: Oops: 96000146 [#1] PREEMPT SMP
PC is at __dma_clean_range+0x18/0x30
LR is at __swiotlb_map_page+0x50/0x64
Call trace:
[<ffffffc0000930f8>] __dma_clean_range+0x18/0x30
[<ffffffc00062214c>] usb_gadget_map_request+0x134/0x1b0
[<ffffffc0005c289c>] __dwc3_ep0_do_control_data+0x110/0x14c
[<ffffffc0005c2d38>] __dwc3_gadget_ep0_queue+0x198/0x1b8
[<ffffffc0005c2e18>] dwc3_gadget_ep0_queue+0xc0/0xe8
[<ffffffc00061cfec>] composite_ep0_queue.constprop.14+0x34/0x98
[<ffffffc00061dfb0>] composite_setup+0xf60/0x100c
[<ffffffc0006204dc>] android_setup+0xd8/0x138
[<ffffffc0005c29a4>] dwc3_ep0_delegate_req+0x34/0x50
[<ffffffc0005c3534>] dwc3_ep0_interrupt+0x5dc/0xb58
[<ffffffc0005c0c3c>] dwc3_thread_interrupt+0x15c/0xa24

With this patch, the gadget driver will not queue
a request and return immediately if req->length is
invalid. And the usb controller driver can handle
the unsupport request correctly.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-05-31 11:24:31 +03:00
Greg Kroah-Hartman ce15bda101 usb: changes for v4.7 merge window
Here's the big USB Gadget pull request. This time
 not as large as usual with only 57 non-merge
 commits.
 
 The most important part here is, again, all the work
 on dwc3. This time around we're treating all
 endpoints (except for control endpoint) exactly the
 same. They all have the same amount of TRBs on the
 ring, they all treat the ring as an actual ring with
 a link TRB pointing to the head, etc.
 
 We're also helping the host side burst (on
 SuperSpeed GEN1 or GEN2 at least) for as long as
 possible until the endpoint returns NRDY.
 
 Other than this big TRB ring rework on dwc3, we also
 have a dwc3-omap DMA initialization fix, some extra
 debugfs files to aid in some odd debug sessions and
 a complete removal of our FIFO resizing logic.
 
 We have a new quirk for some dwc3 P3 quirk in some
 implementations.
 
 The rest is basically non-critical fixes and the
 usual cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXIek2AAoJEIaOsuA1yqRE2+cP/iZzzRshn6atj4b0BaRzyk6k
 acK6YNs8pBgJMt9FaVWhDOlCfa/8hg5W+6Z5Ovpx4WPyJdZbYkoxJ0ZJGKYjYZ/y
 U8hUxpTJ2s2wZKXRKchzT90hQvNlHdg3u2okP2GK0Oa17/idcQf2w1+0Cscm/dqN
 Ur5HgukLe31/MrcPr49OuLkahSPfHUQlOn8i4AZyBTh9L8ouzKDCvzUt2ABoCRLE
 wPcMegJhks7FQ5fksXtLsfqhqAoHpYHlsZQcH35iV8wPdtSueAtZ8tS6t445XbX9
 vEsFq1ovpBMYfl/dwV6RBZiQTjZiGWaIdjOZMUcpbD03yXE2IC6l+mtE/wuhlnHu
 J0Rr4YmfS4g++J1+380NQGoreOBZ2u7pujQ4TAy399zsLD8LR3zOQK5IErILSfpO
 m6p3ElkGuAyHJKmo4CysSspXnnNGBp/fuTkYdPM9IJRJCe0YwnF/zsQd0OrNZ/Pm
 39f6woE2aBQaEzdn+3Nya9B2IWYi6SIheQXPg0HETX/hujZHJv1x758VO6+c7aeq
 nlhRlxSe8u8DKryBG43+F+myHaIz1p0Y2O3MzIlvRv0yw87QevJ4pAWptdMITaMh
 YpgSjDPw5y2z91AhK/Fv+AXswKaoWBc6EEzBirW6hQWllSp+7qWloA6vYXkdHDr7
 QajUBeXzNgXF8JfIos5H
 =7szP
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.7 merge window

Here's the big USB Gadget pull request. This time
not as large as usual with only 57 non-merge
commits.

The most important part here is, again, all the work
on dwc3. This time around we're treating all
endpoints (except for control endpoint) exactly the
same. They all have the same amount of TRBs on the
ring, they all treat the ring as an actual ring with
a link TRB pointing to the head, etc.

We're also helping the host side burst (on
SuperSpeed GEN1 or GEN2 at least) for as long as
possible until the endpoint returns NRDY.

Other than this big TRB ring rework on dwc3, we also
have a dwc3-omap DMA initialization fix, some extra
debugfs files to aid in some odd debug sessions and
a complete removal of our FIFO resizing logic.

We have a new quirk for some dwc3 P3 quirk in some
implementations.

The rest is basically non-critical fixes and the
usual cleanups.
2016-04-28 09:32:39 -07:00
Felipe Balbi 0878263b68 usb: gadget: composite: avoid kernel oops with bad gadgets
If a gadget driver loaded to a Superspeed-capable
peripheral controller, using a Superspeed cable,
doesn't provide Superspeed descriptors, we will get
a NULL pointer dereference.

In order to avoid that situation, we will try to
find any valid descriptors we can. If no set of
descriptors is passed in, then we'll let that gadget
oops anyhow.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28 09:02:00 +03:00
John Youn 138b8638bb usb: gadget: composite: Clear reserved fields of SSP Dev Cap
Set the reserved fields of the SuperSpeed Plus Device Capability
descriptor to 0. Otherwise there might be stale data there which will
cause USB CV to fail.

Fixes: f228a8de24 ("usb: gadget: composite: Return SSP Dev Cap descriptor")
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18 12:35:17 +03:00
John Youn 08f8cabf71 usb: gadget: composite: Access SSP Dev Cap fields properly
Access multi-byte fields of the SSP Dev Cap descriptor using the correct
endianness.

Fixes: f228a8de24 ("usb: gadget: composite: Return SSP Dev Cap descriptor")
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-29 13:25:57 +03:00
Li Jun c5348b621b usb: gadget: composite: handle otg status selector request from OTG host
If gadget with HNP polling support receives GetStatus request of otg
status selector, it feedback to host with host request flag to indicate
if it wants to take host role.

Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:36 +02:00
John Youn cd69cbeb69 usb: gadget: composite: Update debug message for SuperSpeedPlus
Update the debug message reporting the speeds that a configuration
supports for SuperSpeedPlus.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:25 +02:00
John Youn 4eb8e32dab usb: gadget: composite: Configure the usb_ep for SuperSpeedPlus
Configure the usb_ep using the SuperSpeedPlus descriptors if connected
in SuperSpeedPlus.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:25 +02:00
John Youn eae5820b85 usb: gadget: composite: Write SuperSpeedPlus config descriptors
Enable writing of SuperSpeedPlus descriptors for any SuperSpeedPlus
capable configuration when connected in SuperSpeedPlus.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:25 +02:00
John Youn f3bdbe3668 usb: gadget: composite: Add function to get descriptors
There are a couple places in the code that get the function descriptors
based on the speed. Move this lookup into a function call and add
support to handle the SuperSpeedPlus descriptors as well.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:24 +02:00
John Youn a4afd012f4 usb: gadget: composite: Count configs for SuperSpeedPlus
If enumerated in SuperSpeedPlus, count the configurations that support
it.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:24 +02:00
John Youn 554eead543 usb: gadget: Update config for SuperSpeedPlus
When a function is added to a configuration with usb_add_function(), the
configuration speed flags are updated. These flags indicate for which
speeds the configuration is valid for.

This patch adds a flag in the configuration for SuperSpeedPlus and
also updates this based on the existence of ssp_descriptors.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:24 +02:00
John Youn f228a8de24 usb: gadget: composite: Return SSP Dev Cap descriptor
If a gadget supports SuperSpeedPlus or higher speeds, return a
SuperSpeedPlus USB Device Capability descriptor.

Currently this implementation returns a fixed descriptor with typical
values set.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:23 +02:00
John Youn 1a85329171 usb: gadget: composite: Return bcdUSB 0x0310
The USB 3.1 specification replaces the USB 3.0 specification and all new
devices that are running at SuperSpeed or higher speeds must report a
bcdUSB of 0x0310.

Refer to USB 3.1 Specification, Revision 1.0, Section 9.6.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:22 +02:00
Igor Kotrasinski 5527e73305 usb: gadget: composite: fill bcdUSB for any gadget max speed
When handling device GET_DESCRIPTOR, composite gadget driver fills
the bcdUSB field only if the gadget supports USB 3.0. Otherwise
the field is left unfilled.

For consistency, set bcdUSB to 0x0200 for gadgets that don't
support superspeed.

It's correct to use 0x0200 for any setting that doesn't use
superspeed, since USB 2.0 devices can restrict themselves to
full speed only. It is NOT correct to use 0x0210, since BOS
descriptors are handled only if gadget_is_superspeed() is
satisfied, otherwise it results in a stall.

Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-09 16:35:20 -05:00
Robert Baldyga f871cb9b2e usb: gadget: fix few outdated comments
Fix comments in code to make them up to date.

composite: claiming endpoint is now done by setting ep->claimed flag,
not ep->driver_data.

epautoconf: usb_ep_autoconfig() and usb_ep_autoconfig_ss() return
claimed endpoint with ep->claimed flag already set.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27 10:54:31 -05:00
Macpaul Lin 53e6242db8 usb: gadget: composite: add USB_DT_OTG request handling
Copy usb_otg_descriptor from config's descriptor if host requests
USB_DT_OTG.

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Signed-off-by: Li Jun <jun.li@freescale.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:20 -05:00
Robert Baldyga d5bb9b81db usb: composite: add bind_deactivated flag to usb_function
This patch introduces 'bind_deactivated' flag in struct usb_function.
Functions which don't want to be activated automatically after bind should
set this flag, and when they start to be ready to work they should call
usb_function_activate().

When USB function sets 'bind_deactivated' flag, initial deactivation
counter is incremented automatically, so there is no need to call
usb_function_deactivate() in function bind.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:19 -05:00
Robert Baldyga 5601250bb1 usb: composite: fix usb_function_activate/deactivate functions
Using usb_gadget_disconnect to make gadget temporarily invisible to host
doesn't provide desired result, because gadget is connected immediately
after binding regardless to previous usb_gadget_disconnect() calls.

For this reason we use usb_gadget_deactivate() instead of
usb_gadget_disconnect() to make it working as expected.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:19 -05:00
Diego Viola ad4676ab58 usb: gadget: composite.c: i18n is not an acronym
I18N should be spelled as i18n because it's not
an acronym

Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:18 -05:00
Kishon Vijay Abraham I b4c21f0bdd usb: gadget: composite: Fix NULL pointer dereference
commit f563d23090 ("usb: gadget: composite: add req_match method
to usb_function") accesses cdev->config even before set config
is invoked causing a NULL pointer dereferencing error while running
Lecroy Mass Storage Compliance test.

Fix it here by accessing cdev->config only if it is non NULL.

Fixes: commit f563d23090 ("usb: gadget: composite: add req_match
method to usb_function").

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06 12:34:08 -05:00
Masanari Iida 06ed0de518 usb: gadget: Fix typo fond in Documentation/Docbook/gadget.xml
This patch fix some spelling typo found in gadget.xml.
It is because this file is generated from comments in sources,
I had to fix comments in the source, instead of xml file itself.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-11 10:19:35 -05:00
Andrzej Pietrasiewicz f563d23090 usb: gadget: composite: add req_match method to usb_function
Non-standard requests can encode the actual interface number in a
non-standard way. For example composite_setup() assumes
that it is w_index && 0xFF, but the printer function encodes the interface
number in a context-dependet way (either w_index or w_index >> 8).
This can lead to such requests being directed to wrong functions.

This patch adds req_match() method to usb_function. Its purpose is to
verify that a given request can be handled by a given function.
If any function within a configuration provides the method and it returns
true, then it is assumed that the right function is found.

If a function uses req_match(), it should try as hard as possible to
determine if the request is meant for it.

If no functions in a configuration provide req_match or none of them
returns true, then fall back to the usual approach.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:39 -05:00
Andrzej Pietrasiewicz 232c0102e8 usb: gadget: composite: don't try standard handling for non-standard requests
If a non-standard request is processed and its parameters just happen
to match those of some standard request, the logic of composite_setup()
can be fooled, so don't even try any switch cases, just go to the
proper place where unknown requests are handled.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:33 -05:00
Mario Schuknecht df6738d0d2 usb: gadget: Fix os desc test
USB vendor type is encoded in field bmRequestType. Make test USB_TYPE_VENDOR
with bRequestType instead of bRequest.

Signed-off-by: Mario Schuknecht <mario.schuknecht@dresearch-fe.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27 09:34:58 -06:00
Andrzej Pietrasiewicz 3a57187085 usb: gadget: configfs: add suspend/resume
USB gadgets composed with configfs lack suspend and resume
methods. This patch uses composite_suspend()/composite_resume()
the same way e.g. composite_setup() or composite_disconnect()
are used in a configfs-based gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:59 -06:00
Felipe Balbi a7c12eaf2e usb: gadget: composite: conditionally dequeue os_desc and setup requests
In case we unload a gadget driver while any of
os_desc_req or req are still pending, we need
to make sure to dequeue them.

By using our setup_pending and os_desc_pending
flags we achieve that in a way that doesn't
cause any regressions because we won't dequeue
a request which was already completed.

The original idea came from Li Jun's commit
f2267089ea
(usb: gadget: composite: dequeue cdev->req
before free it in composite_dev_cleanup) which,
unfortunately, caused two regressions (kfree()
being called before usb_ep_dequeue() and calling
usb_ep_dequeue() when the request was already
completed). That commit also didn't take care
of os_desc_req which can fall into the same
situation so we must care for that one too.

Note that in order to make code slightly easier
to read, we introduce composite_ep_queue() which
hides details about how to fiddle with our pending
flags.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:55 -06:00
Felipe Balbi 57943716ff usb: gadget: composite: set our req->context to cdev
by doing that we will be able to match our
requests against req and os_desc_req and also
clear our pending flags from complete callback.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:00:55 -06:00
Felipe Balbi a6615937bc usb: gadget: composite: enable BESL support
According to USB 2.0 ECN Errata for Link Power
Management (USB2-LPM-Errata-final.pdf), BESL
must be enabled if LPM is enabled.

This helps with USB30CV TD 9.21 LPM L1
Suspend Resume Test.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-23 09:55:41 -05:00
Felipe Balbi bf17eba7ae Revert "usb: gadget: composite: dequeue cdev->req before free it in composite_dev_cleanup"
This reverts commit f2267089ea.

That commit causes more problem than fixes. Firstly, kfree()
should be called after usb_ep_dequeue() and secondly, the way
things are, we will try to dequeue a request that has already
completed much more frequently than one which is pending.

Cc: Li Jun <b47624@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org> # 3.17
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 07:56:21 -07:00
Felipe Balbi 72a65a0d19 Revert "usb: gadget: composite: dequeue cdev->req before free its buffer"
This reverts commit be0a8887bb.

The original commit f2267089ea
(usb: gadget: composite: dequeue cdev->req before free it in
composite_dev_cleanup) ended up being reverted because it caused
more issues then fixed. We will also revert this counter part
commit so we start clean to properly add that idea back.

Cc: Li Jun <b47624@freescale.com>
Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-09-18 09:42:49 -05:00
Peter Chen d8a816fc6f usb: gadget: composite: add reset API at usb_gadget_driver
Add reset API at usb_gadget_driver, it calls disconnect handler currently,
but may do different things in future.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09 09:58:54 -05:00