Commit Graph

2627 Commits

Author SHA1 Message Date
Roland Dreier 814b0a6120 Merge branches 'nes' and 'qib' into for-next 2011-02-17 14:04:59 -08:00
Mike Marciniszyn c0af2c057d IB/qib: Prevent double completions after a timeout or RNR error
There is a double completion associated with error handling for RC QPs.

The sequence is:

 - The do_rc_ack() routine fields an RNR nack and there are 0
   rnr_retries configured on the QP.
 - qib_error_qp() stops the pending timer
 - qib_rc_send_complete() is called from sdma_complete()
 - qib_rc_send_complete() starts the timer because the msb of the psn
   just completed says an ack is needed.
 - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP
 - rc_timeout() calls qib_restart_rc()
 - qib_restart_rc() calls qib_send_complete() with a
   IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the
   past

The fix avoids starting the timer since another packet will never
arrive.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-17 14:04:50 -08:00
Mike Marciniszyn 414ed90cee IB/qib: Fix double add_timer()
The following panic BUG_ON occurs during qib testing:

    Kernel BUG at include/linux/timer.h:82

    RIP  [<ffffffff881f7109>] :ib_qib:start_timer+0x73/0x89
     RSP <ffffffff80425bd0>
     <0>Kernel panic - not syncing: Fatal exception
     <0>Dumping qib trace buffer from panic
    qib_set_lid INFO: IB0:1 got a lid: 0xf8
    Done dumping qib trace buffer
    BUG: warning at kernel/panic.c:137/panic() (Tainted: G

The flaw is due to a missing state test when processing responses that
results in an add_timer() call when the same timer is already queued.
This code was executing in parallel with a QP destroy on another CPU
that had changed the state to reset, but the missing test caused to
response handling code to run on into the panic.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-10 11:24:08 -08:00
Maciej Sosnowski 25a54a6bb8 RDMA/nes: Don't generate async events for unregistered devices
nes_port_ibevent() should not be called when the nes RDMA device is not
registered with the RDMA core.  Add missing checks of of_device_registered flag.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-03 15:55:26 -08:00
Linus Torvalds 9118626a30 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA: Update missed conversion of flush_scheduled_work()
  RDMA/ucma: Copy iWARP route information on queries
  RDMA/amso1100: Fix compile warnings
  RDMA/cxgb4: Set the correct device physical function for iWARP connections
  RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
  IB/qib: Hold link for TX SERDES settings
  mlx4_core: Add ConnectX-3 device IDs
2011-02-03 11:19:26 -08:00
Roland Dreier e51c7b1ab0 Merge branches 'amso1100', 'cma', 'cxgb4', 'misc', 'mlx4' and 'qib' into for-next 2011-01-29 20:45:04 -08:00
Tejun Heo 96e61fa55e RDMA: Update missed conversion of flush_scheduled_work()
Commit f06267104d ("RDMA: Update workqueue usage") introduced ib_wq
and removed the use of flush_scheduled_work(); however, during the merge
process one chunk was lost in ib_sa_remove_one().  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 16:39:08 -08:00
Steve Wise e86f8b06f5 RDMA/ucma: Copy iWARP route information on queries
For iWARP rdma_cm ids, the "route" information is the L2 src and
next hop addresses.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 16:34:05 -08:00
Ralf Thielow f9a4f6dcdd RDMA/amso1100: Fix compile warnings
Fix compile warnings on 32-bit by using "0" instead of "(u64) NULL" to
assign to "c2_vq_req->reply_msg".

Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>

[ Change from "(unsigned long) NULL" to plain old "0" as suggested by
  Bart Van Assche <bvanassche@acm.org>.  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:40:25 -08:00
Steve Wise 94788657c9 RDMA/cxgb4: Set the correct device physical function for iWARP connections
The PF passed to FW was 0, causing PCI failures in an SR-IOV environment.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:34:28 -08:00
Steve Wise 6a09a9d694 RDMA/cxgb4: Limit MAXBURST EQ context field to 256B
MAXBURST cannot exceed 256B for on-chip queues.  With a 512B MAXBURST,
we can lock up the chip.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:34:24 -08:00
Mitko Haralanov d70585f7de IB/qib: Hold link for TX SERDES settings
Hold the IB link at DISABLED until we get the correct TX settings
on mezz boards.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:30:02 -08:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Linus Torvalds 6845a44a31 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA: Update workqueue usage
  RDMA/nes: Fix incorrect SFP+ link status detection on driver init
  RDMA/nes: Fix SFP+ link down detection issue with switch port disable
  RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events
  RDMA/nes: Fix bonding on iw_nes
  IB/srp: Test only once whether iu allocation succeeded
  IB/mlx4: Handle protocol field in multicast table
  RDMA: Use vzalloc() to replace vmalloc()+memset(0)
  mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)
  IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
2011-01-17 14:45:48 -08:00
Roland Dreier 4790f4dc5f Merge branches 'misc', 'mlx4', 'mthca', 'nes' and 'srp' into for-next 2011-01-16 21:22:41 -08:00
Tejun Heo f06267104d RDMA: Update workqueue usage
* ib_wq is added, which is used as the common workqueue for infiniband
  instead of the system workqueue.  All system workqueue usages
  including flush_scheduled_work() callers are converted to use and
  flush ib_wq.

* cancel_delayed_work() + flush_scheduled_work() converted to
  cancel_delayed_work_sync().

* qib_wq is removed and ib_wq is used instead.

This is to prepare for deprecation of flush_scheduled_work().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 21:16:31 -08:00
Maciej Sosnowski 843276ad98 RDMA/nes: Fix incorrect SFP+ link status detection on driver init
During iw_nes initialization the link status for SFP+ PHY is always
detected as "up" regardless of real state (cable either connected or
disconnected).  Add SFP+ PHY specific link status detection to the
iw_nes initialization procedure.  Use link status recheck for
netdev_open to detect delayed state updates.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:35 -08:00
Maciej Sosnowski 5f61b2c693 RDMA/nes: Fix SFP+ link down detection issue with switch port disable
In case of SFP+ PHY, link status check at interrupt processing can
give false results.  For proper link status change detection a delayed
recheck is needed to give nes registers time to settle.  Add a
periodic link status recheck scheduled at interrupt to detect
potential delayed registers state changes.

Addresses: http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2117
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:34 -08:00
Maciej Sosnowski ea623455b7 RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events
Depending on link state change, IB_EVENT_PORT_ERR or
IB_EVENT_PORT_ACTIVE should be generated when handling MAC interrupts.

Plugging in a cable happens to result in series of interrupts changing
driver's link state a number of times before finally staying at link
up (e.g. link up, link down, link up, link down, ..., link up).  To
prevent sending series of redundant IB_EVENT_PORT_ACTIVE and
IB_EVENT_PORT_ERR events, we use a timer to debounce them in
nes_port_ibevent().

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:34 -08:00
Maciej Sosnowski 2a4c97ead4 RDMA/nes: Fix bonding on iw_nes
Enable configuring bonds on nes devices by adding missing support for
master net_device to the driver.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16 13:23:33 -08:00
Bart Van Assche 695b83495e IB/srp: Test only once whether iu allocation succeeded
Merge the two tests in srp_queuecommand() of whether information unit
allocation succeeded into one.  An intended side effect of this change
is that we fix the warning:

    drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_queuecommand':
    drivers/infiniband/ulp/srp/ib_srp.c:1116: warning: 'req' may be used uninitialized in this function

(seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y at least with gcc 4.4.4)

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-13 14:00:43 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Aleksey Senin da995a8aee IB/mlx4: Handle protocol field in multicast table
The newest device firmware stores IB vs. Ethernet protocol in two bits
in members_count field of multicast group table (0: Infiniband, 1:
Ethernet).  When changing the QP members count for a multicast group,
it important not to reset this information.  When calling multicast
attach first time, the protocol type should be specified.  In this
patch we always set it IB, but in the future we will handle Ethernet
too.  When looking for a QP, the protocol type shoud be checked too.

Signed-off-by: Aleksey Senin <alekseys@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 14:49:17 -08:00
Joe Perches 948579cd8c RDMA: Use vzalloc() to replace vmalloc()+memset(0)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 11:11:58 -08:00
Roland Dreier 4979d18fe1 mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)
Some systems have PCI addresses that don't fit in unsigned long (eg some
32-bit PowerPC 440 systems have 36-bit bus addresses).  Fix up mlx4 drivers
by using phys_addr_t where appropriate, so we don't truncate any PCI
resource addresses before ioremapping them.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 09:50:36 -08:00
John L. Burr eb4a7cbf27 IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
Some systems have PCI addresses that don't fit in unsigned long (eg some
32-bit PowerPC 440 systems have 36-bit bus addresses).  Fix up the driver
by using phys_addr_t where appropriate, so we don't truncate any PCI
resource addresses before ioremapping them.

Signed-off-by: John L. Burr <jlburr@cadence.com>

[ Update to apply to current driver source.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11 20:39:47 -08:00
Linus Torvalds f1d6d6cd90 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits)
  IB/qib: Fix refcount leak in lkey/rkey validation
  IB/qib: Improve SERDES tunning on QMH boards
  IB/qib: Unnecessary delayed completions on RC connection
  IB/qib: Issue pre-emptive NAKs on eager buffer overflow
  IB/qib: RDMA lkey/rkey validation is inefficient for large MRs
  IB/qib: Change QPN increment
  IB/qib: Add fix missing from earlier patch
  IB/qib: Change receive queue/QPN selection
  IB/qib: Fix interrupt mitigation
  IB/qib: Avoid duplicate writes to the rcv head register
  IB/qib: Add a few new SERDES tunings
  IB/qib: Reset packet list after freeing
  IB/qib: New SERDES init routine and improvements to SI quality
  IB/qib: Clear WAIT_SEND flags when setting QP to error state
  IB/qib: Fix context allocation with multiple HCAs
  IB/qib: Fix multi-Florida HCA host panic on reboot
  IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better
  IB/qib: UD send with immediate receive completion has wrong size
  IB/qib: Set port physical state even if other fields are invalid
  IB/qib: Generate completion callback on errors
  ...
2011-01-11 16:30:08 -08:00
Roland Dreier 2b76c05794 Merge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and 'srp' into for-next 2011-01-10 17:43:30 -08:00
Mike Marciniszyn 4db62d4786 IB/qib: Fix refcount leak in lkey/rkey validation
The mr optimization introduced a reference count leak on an exception
test.  The lock/refcount manipulation is moved down and the problematic
exception test now calls bail to insure that the lock is released.

Additional fixes as suggested by Ralph Campbell <ralph.campbell@qlogic.org>:
- reduce lock scope of dma regions
- use explicit values on returns vs. automatic ret value

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:23 -08:00
Mike Marciniszyn f2d255a078 IB/qib: Improve SERDES tunning on QMH boards
Improve the QMH SERDES tunning on initial driver load by having the
driver go through a link state change.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn dd04e43d46 IB/qib: Unnecessary delayed completions on RC connection
Currently on receipt of a response message (ACKs, RDMA Response,
Atomic Responses etc.) if the SDMA completion counter is not advanced
the driver delays the completion of the WQE.  In most cases this is
overly pessimistic as the response (ACK) to a previously transmitted
send implies that the send is complete.  Ensure that SDMA queue is
progressed appropriately before determining if a send has delayed
completions.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 994bcd28a3 IB/qib: Issue pre-emptive NAKs on eager buffer overflow
Under congestion resulting in eager buffer overflow attempt to send
pre-emptive NAKs if header queue entries with TID errors are generated
and a valid header is present.  This prevents long timeouts and flow
restarts if a trailing set of packets are dropped due to eager
overflows.  Pre-emptive NAKs are currently only supported for RDMA
writes.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 2a600f14d2 IB/qib: RDMA lkey/rkey validation is inefficient for large MRs
The current code loops during rkey/lkey validiation to isolate the MR
for the RDMA, which is expensive when the current operation is inside
a very large memory region.

This fix optimizes rkey/lkey validation routines for user memory
regions and fast memory regions.  The MR entry can be isolated by
shifts/mods instead of looping.  The existing loop is preserved for
phys memory regions for now.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 7c3edd3ff3 IB/qib: Change QPN increment
Changing from +1 to +2 allows for better QP distribution across
receive contexts.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:22 -08:00
Mike Marciniszyn 057ae62fac IB/qib: Add fix missing from earlier patch
The upstream code was missing part of a receive/error race fix from
the internal tree.  Add the missing part, which makes future merges
possible.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn 2528ea60f9 IB/qib: Change receive queue/QPN selection
The basic idea is that on SusieQ, the difficult part of mapping QPN to
context is handled by the mapping registers so the generic QPN
allocation doesn't need to worry about chip specifics.  For Monty and
Linda, there is no mapping table so the qpt->mask (same as
dd->qpn_mask), is used to see if the QPN to context falls within
[zero..dd->n_krcv_queues).

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn 19ede2e422 IB/qib: Fix interrupt mitigation
For SusieQ we need to write to the interrupt timer register before
updating the header queue head with interrupt count.  This is to
ensure that the timer is enabled properly and a receive available
interrupt is delivered.  Otherwise this interrupt can be lost if the
receiver header/eager queues are full before the timer is enabled.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn aa7374ac19 IB/qib: Avoid duplicate writes to the rcv head register
Avoid duplicate writes to the head register as this can lead to lost
interrupts if the context goes full before the second write is done.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn e706203c7c IB/qib: Add a few new SERDES tunings
Add new SERDES tuning to aid manufacturing.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn f73df408b2 IB/qib: Reset packet list after freeing
Reset the list pointers after freeing the SDMA packet list.  This is
done to any potential double-free cases.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:21 -08:00
Mike Marciniszyn a0a234d47d IB/qib: New SERDES init routine and improvements to SI quality
Implement new SERDES initialization routine and improvements to signal
integrity -- disable LE1 adaptation, disable LOS after link-up, set
better SERDES parameters.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 16028f2777 IB/qib: Clear WAIT_SEND flags when setting QP to error state
If these flags are set when the QP is transitioned to the error state,
it will wait until the flags are cleared, which may never happen if
the error transition is due to a link going down.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 6676b3f746 IB/qib: Fix context allocation with multiple HCAs
The driver was incorrectly choosing HCAs on which to allocate new user
contexts based on overall count of usable ports regardless whether the
usable port was on the currently selected HCA.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 5dbbcb97cc IB/qib: Fix multi-Florida HCA host panic on reboot
Add check when setting configured contexts that the value does not
exceed the number of contexts allocated for the card.  If the value
exceeds the already allocated count, set it to what is already
allocated.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn b3d5cb2f20 IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better
When the link transitions from ACTIVE_DEFERRED to ACTIVE, the driver
only sees the ACTIVE state. With this change, it will check whether
the state was already ACTIVE and if so, it will not generated IB
events and will not clear symbol error counts.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn c7665e5a69 IB/qib: UD send with immediate receive completion has wrong size
The code to generate receive completion entries for UD send with
immediate contains the wrong payload length.  This is because when the
code to compute the payload size was moved, the value of hdrsize
didn't get moved too.  The fix is to update tlen directly.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:20 -08:00
Mike Marciniszyn 3c9e5f4d65 IB/qib: Set port physical state even if other fields are invalid
The IBTA vol. 1 release 1.2.1 spec. says:
C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall
make any changes it specifies to PortInfo:PortPhysicalState; any other
result is vendor-dependent.

The patch changes the error handling so that the reply says there are
invalid fields but still attempts to set fields that are in range
including PortInfo:PortPhysicalState.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Mike Marciniszyn a377acd151 IB/qib: Generate completion callback on errors
According to IBTA vol. 1, C11-30.1.1, a notification callback is
invoked if the CQ is armed for the next solicited completion event or
an error completion.  The error case wasn't being generated correctly.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Mike Marciniszyn f509f9c14d IB/qib: Add support for the new QME7362 card
Add support to recognize another board variation named QME7362.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00
Mike Marciniszyn 0a43e11722 IB/qib: Add receive header queue size module parameters
The receive header queue sizes need to modified for performance
tuning.  Three module parameters are added to support this.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:19 -08:00