The equivalent should always be done using iio_alllocate_device
with to create a private area for the driver and then iio_priv
to access it. There may be other uses for a private data pointer
but right now it just leads driver writers astray.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are some unusual corners in the probe function of this
driver, so may need another look.
V2: Now with the check for allocation success not inverted.
V3: Now with the i2c devdata calls actually being correctly cast.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Jon Brenner <jbrenner@TAOSinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also push one down into the only driver that actually uses it.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorder to remove need for definitions currently in header.
Remove ida related utility function defs from header.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix trivial wrong index (no effect on any current drivers).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clear out all the excessive includes in the *_ring.c files.
Mixture of cut and paste bloat and things needed for code that
has gone away.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
More headers now not needed after iio_chan_spec conversions.
A couple of drivers were using helpers from adc.h.
Given these were trivial, they are pushed down into the drivers.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Missing from the iio_chan_spec conversion patches.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is no clear use case for this functionality in a driver
that only supports slow reading via sysfs. The interface
use was non compliant with the abi motiving it being dropped.
It can go back in if anyone ever implements buffered reading
support for this device. Then it will be controlled as
part of the buffering abi where this should indeed be correctly
supported.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These should have gone with the iio_chan_spec conversion.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These should have gone with the iio_chan_spec conversion patch.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Right now this results in increased code, but I still think it is worth doing to avoid
replication across instances of drivers etc and move as much stuff as possible to constant.
Ops structure is optional for the occasional driver that uses none of it (currently
only the ad7793).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These should really have gone away with the code that needed them.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Getting rid of messages that make it harder to spot important issues.
Some code removed that will be useful one day. Can put it back then.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No idea how this particularly 'quirk' got in there in the first
place.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Needed to ensure the reference counting is correct.
Temporary fix whilst discussions are ongoing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduced when I did the iio_chan_spec conversion. Detected by smatch.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Coccinelle found this one. I'm not certain what
the intent is, but this fix makes no functional changes.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vivien pointed out that 99e5dc45b8
removed the IIO_DEVICE_ATTR_2 macro but didn't clean up the other
macros that used it.
As it turns out, no one is using val2 in tree, so lets scrap that
until it is needed.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The unwinding index was j, not i and it is much simpler to do these as a single
loop unwinding those elements necessary in before jumping to the error handler.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
indio_dev->channels was accidentally removed thus preventing any sysfs
registrations occuring for direct reading. That hid the other issue.
Unfortunately the incorrect handling leads to misspresentation of data
in sysfs reads.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This code was cut and pasted in several places. It's missing some
unlocks on error.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Looks like this moved into the core at somepoint and kfifo buf got left
behind.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This mean all sorts of interesting results on driver removal.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A number of these register indexes were not set or actually wrong.
This only effects sysfs reads.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the driver's get_sensor_data() interfaces and replace them with
iio_chan_spec channels. This converts 4 files to the new framework.
Driver ABI change: The intensity_infrared_raw file is now intensity_ir_raw.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add "proximity" to the iio_chan_type_name_spec_shared string list to
support proximity sensors.
Now this list fully matches the declared iio_chan_type enums.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes comparison between the iio_chan_type_name_spec_shared strings
and the iio_chan_type enums easier.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The I2C clientdata is set to indio_dev instead of chip as of a couple weeks ago.
Correct the calls to i2c_get_clientdata() accordingly.
Otherwise the driver fails to initialize.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are a couple places here where we should have called
mutex_unlock() before returning.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Defaulting to 1, this gives a way to amplify the lux value before being
reduced by the programmed adc_bit shift.
Only support whole numbers right now. When this driver is converted to the new
IIO_CHAN framework, it will be easy to support the framework's pseudo float.
Add illuminance0_calibscale documentation to sysfs-bus-iio-light.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were some uninitialized variable warnings in iio. Two of
these came from the recent changes to how the private data was
allocated in 83f0422dc6 "staging:iio:accel:sca3000: allocate
state in iio_dev and use iio_priv to access."
drivers/staging/iio/accel/sca3000_core.c: In function 'sca3000_probe':
drivers/staging/iio/accel/sca3000_core.c:1137:9: warning: 'st' may be used uninitialized in this function
drivers/staging/iio/adc/ad7291.c: In function 'ad7291_probe':
drivers/staging/iio/adc/ad7291.c:805:15: warning: 'chip' may be used uninitialized in this function
drivers/staging/iio/dac/ad5624r_spi.c: In function 'ad5624r_probe':
drivers/staging/iio/dac/ad5624r_spi.c:228:24: warning: 'st' may be used uninitialized in this function
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This handles the merge conflicts with the
drivers/staging/brcm80211/Kconfig file due to changes on the two
different branches.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is so we can support it on x86 SMBUS adapters.
Since i2c adapters which do not provide an smbus_xfer interface fall
back to using their I2C master_xfer interface, all the i2c_master_send()
calls in this driver are changed to i2c_smbus_*() calls.
This will fail on an i2c adapter that implements a proper subset of
(SMBUS_BYTE | SMBUS_BYTE_DATA | SMBUS_WORD_DATA), but I do not see that
in any of our adapters today.
This results in a few wrapper functions that provide little additional
functionality, so remove them and call the smbus functions directly from
the general driver code.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the required read/write_raw functions to the tsl2563_info_no_irq data
structure. This structure is used insted of tsl2563_info when the I2C client
has no IRQ.
The absence of these functions causes a panic when reading or writing the
created sysfs files.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a wrapper for this driver around the IIO_CHAN() wrapper to make channel
parameters more readable. This fixes a panic caused by the info_masks being
accidentally passed in as channel2 parameters which easily surpass the size
of the iio_modifier_names_light array.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Same problem as seen and fixed in adis16204 et al.
These were fixed by Randy in:
staging: fix more iio builds when IIO_RING_BUFFER is not enabled
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the error handling, it dereferences "st" before it has been
initialized. I also just tidied it up a bit to remove some extra
conditions.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No point to start comments with '\'.
Signed-off-by: maximilian attems <max@stro.at>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
New driver for AD5686R, AD5685R, AD5684R Quad channel digital to analog converters
Changes since V1:
drop header file
use strtobool()
Fix dev attribute macros
Reorder probe() function
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add IIO_OUT type for DAC like devices
In case of IIO_OUT make sure the channel device attribute is writable
Ideally we add a flag to iio_chan_spec that tells the core that
the channel device attribute is writable...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
New driver for AD7792/AD7793 3-Channel, Low Noise,
Low Power, 16-/24-Bit Sigma-Delta ADC with On-Chip In-Amp
and Reference.
The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
In order to avoid contentions on the SPI bus, it's necessary to use
spi bus locking. The DOUT/RDY output must also be wired to an
interrupt capable GPIO.
In INDIO_RING_TRIGGERED mode, this driver may block its SPI bus segment
for an extended period of time.
Changes since V1:
Use bool where applicable.
Use data buffer that lives in their own cache line.
Restructure ad7793_calibrate_all to use an array.
Use msleep.
Query REG_ID instead of doing a write/read This is a test.
Add support for unipolar mode.
Drop range attribute in favor of write scale.
Add proper locking.
Use new validate_trigger callbacks.
Use IIO_IN_DIFF for differential channels.
Change attribute naming.
Use available_scan_masks.
Some other miscellaneous cleanup (none functional changes).
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Basically use various new facilities to tidy up.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Here the ordering is a little tricky, so to keep changes minimal, a copy of the gpio
number is introduced.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Very simple driver, so not much to do.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I've currently squashed the vel + pos combined attribute. If people need them
precisely paired I doubt they will get them from the sysfs interface anyway.
If that is a requirement it should come via a buffer implementation.
Note this patch leaves the completely non standard interface alone.
That will get fixed later.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Note I haven't made any changes to the userspace interface as yet.
This is all about cleaning up what was actually there (handling
all errors etc).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Requires moving a few things around, but should be no functional changes.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is still a very odd driver.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The main attribute group was placed under driver name for some reason.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Slightly fiddly case with two regulators - could reorder, but this is the approach with
smallest likely impact.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Various minor cleanups needed to deal with removal of iio_dev pointer from chip state.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Again, get rid of unwanted iio_dev pointer in state.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also remove the iio_dev pointer from chip state as never needed.
V2: Actually allocate the space for iio_priv data.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
V2 - actually allocate some space for the iio_priv data.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reg handling is a little fiddly given the ordering of calls.
All part of getting rid of iio_dev->dev_data
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron
Dan Carpenter
Bryan Freed
Greg Kroah-Hartman
maximilian attems
Michael Hennerich
anish kumar