Commit Graph

73 Commits

Author SHA1 Message Date
Bjorn Helgaas bec36cfa7b Merge branch 'pci/host-qcom' into next
* pci/host-qcom:
  PCI: qcom: Limit TLP size to 2K to work around hardware issue
  PCI: qcom: Fix spelling mistake: "asser" -> "assert"
  PCI: qcom: Reorder to put v0 functions together, v1 functions together, etc
  PCI: qcom: Add support for IPQ4019 PCIe controller
2017-07-04 11:00:57 -05:00
Bjorn Helgaas 8a08e7eada Merge branch 'pci/host-kirin' into next
* pci/host-kirin:
  PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver
2017-07-04 11:00:56 -05:00
Bjorn Helgaas beaba77cf2 Merge branch 'pci/host-imx6' into next
* pci/host-imx6:
  PCI: imx6: Add regulator support
2017-07-03 08:00:32 -05:00
Bjorn Helgaas ecf75c46e6 Merge branch 'pci/host-dra7xx' into next
* pci/host-dra7xx:
  PCI: dwc: dra7xx: Use RW1C for IRQSTATUS_MSI and IRQSTATUS_MAIN
  PCI: dwc: dra7xx: Depend on appropriate SoC or compile test
2017-07-03 08:00:30 -05:00
Bjorn Helgaas f011a5f8ba Merge branch 'pci/host-designware' into next
* pci/host-designware:
  PCI: dwc: Constify dw_pcie_host_ops structures
  PCI: host: Mark PCIe/PCI (MSI) cascade ISR as IRQF_NO_THREAD
2017-07-03 08:00:30 -05:00
Bjorn Helgaas 44d745fb5d Merge branch 'pci/irq-fixups' into next
* pci/irq-fixups:
  arm64: PCI: Drop DT IRQ allocation from pcibios_alloc_irq()
  PCI: xilinx-nwl: Move to struct pci_host_bridge IRQ mapping functions
  PCI: rockchip: Move to struct pci_host_bridge IRQ mapping functions
  PCI: xgene: Move to struct pci_host_bridge IRQ mapping functions
  PCI: altera: Drop pci_fixup_irqs()
  PCI: versatile: Drop pci_fixup_irqs()
  PCI: generic: Drop pci_fixup_irqs()
  PCI: faraday: Drop pci_fixup_irqs()
  PCI: designware: Drop pci_fixup_irqs()
  PCI: iproc: Drop pci_fixup_irqs()
  PCI: rcar: Drop pci_fixup_irqs()
  PCI: xilinx: Drop pci_fixup_irqs()
  PCI: tegra: Drop pci_fixup_irqs()
  ARM/PCI: Remove pci_fixup_irqs() call for bios32 host controllers
  PCI: Add a call to pci_assign_irq() in pci_device_probe()
  OF/PCI: Update of_irq_parse_and_map_pci() comment
  PCI: Add pci_assign_irq() function and have pci_fixup_irqs() use it
  PCI: Add IRQ mapping function pointers to pci_host_bridge struct
  PCI: Build setup-irq.o on all arches
  PCI: Remove pci_scan_root_bus_msi()
  PCI: xilinx-nwl: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: rockchip: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: generic: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: xgene: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: xilinx: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: altera: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: versatile: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: iproc: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: rcar: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: aardvark: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: designware: Convert PCI scan API to pci_scan_root_bus_bridge()
  ARM/PCI: Convert PCI scan API to pci_scan_root_bus_bridge()
  PCI: Make pci_register_host_bridge() PCI core internal
  PCI: Add pci_scan_root_bus_bridge() interface
  PCI: tegra: Fix host bridge memory leakage
  PCI: faraday: Fix host bridge memory leakage
  PCI: Add devm_pci_alloc_host_bridge() interface
  PCI: Add pci_free_host_bridge() interface
  PCI: Initialize bridge release function at bridge allocation
  PCI: faraday: Convert IRQ masking to raw PCI config accessors
  PCI: iproc: Convert link check to raw PCI config accessors
  PCI: xilinx-nwl: Remove nwl_pcie_enable_msi() unused bus parameter
2017-07-03 08:00:29 -05:00
Srinivas Kandagatla b8f2a85656 PCI: qcom: Limit TLP size to 2K to work around hardware issue
Limit TLP size to 2K to work around a hardware bug in the v0 version of
PCIe IP.  When using default TLP size of 4K, the internal buffer gets
corrupted due to this hardware bug.

This bug was originally noticed during ssh session between APQ8064-based
board and PC.  Network packets got corrupted randomly and terminated the ssh
session due to this bug.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-02 18:45:09 -05:00
Colin Ian King 7a5966eb91 PCI: qcom: Fix spelling mistake: "asser" -> "assert"
Trivial fix to spelling mistake in dev_err message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-02 18:45:09 -05:00
Bjorn Helgaas 5d0f1b84c5 PCI: qcom: Reorder to put v0 functions together, v1 functions together, etc
Previously the v0, v1, and v2 functions were not grouped together in a
consistent order.  Reorder them to make them consistent.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-02 18:45:08 -05:00
John Crispin 90d52d57cc PCI: qcom: Add support for IPQ4019 PCIe controller
Add support for the IPQ4019 PCIe controller.  IPQ4019 supports Gen 1/2, one
lane, one PCIe root complex with support for MSI and legacy interrupts, and
it conforms to PCI Express Base 2.1 specification.

The core init is the same as for the MSM8996, however the clocks and reset
lines differ.

[bhelgaas: fix qcom_pcie_get_resources_v3(), qcom_pcie_init_v3() compile
issues]
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: Rob Herring <robh@kernel.org>		# binding
2017-07-02 18:45:08 -05:00
Xiaowei Song fc5165db24 PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver
Hisilicon PCIe driver shares the common functions for PCIe dw-host.

The poweron functions are developed on hi3660 SoC, while other functions
are common for Kirin series SoCs.

Low power mode (L1 sub-state and Suspend/Resume), hotplug and MSI feature
are not supported currently.

Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com>
[bhelgaas: fold in MAINTAINERS update from
http://lkml.kernel.org/r/20170704021516.96575-1-songxiaowei@hisilicon.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
2017-07-02 18:44:12 -05:00
Quentin Schulz c26ebe98a1 PCI: imx6: Add regulator support
Some boards might require to control a regulator to power the PCIe port.

Add support for an optional regulator defined in Device Tree linked in the
PCIe controller under `vpcie-supply`.  If present, the regulator will be
disabled and then enabled as part of the PCIe host initialization process
and will be disabled when shutting down.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
[bhelgaas: use dev_err() instead of pr_err() in
imx6_pcie_assert_core_reset()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2017-07-02 18:43:39 -05:00
Arvind Yadav 40aa52c462 PCI: dwc: dra7xx: Use RW1C for IRQSTATUS_MSI and IRQSTATUS_MAIN
Previously, we tried to clear interrupt requests by clearing bits in the
PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI and PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN
registers.  But per the TRM, these fields are RW1C, so we must *set* bits
to clear the interrupt bits.

Fixes: 47ff3de911 ("PCI: dra7xx: Add TI DRA7xx PCIe driver")
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-07-02 18:39:31 -05:00
Peter Robinson 27fce382a8 PCI: dwc: dra7xx: Depend on appropriate SoC or compile test
The PCI controller attached to a SoC isn't much use if the core SoC isn't
enabled, unless of course it's compile testing, so add appropriate
dependency.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-07-02 18:39:31 -05:00
Jisheng Zhang 4ab2e7c0df PCI: dwc: Constify dw_pcie_host_ops structures
The dw_pcie_host_ops structures are never modified.  Constify these
structures such that these can be write-protected.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-07-02 18:38:50 -05:00
Jisheng Zhang 3eefa790c9 PCI: host: Mark PCIe/PCI (MSI) cascade ISR as IRQF_NO_THREAD
Similar as commit 8ff0ef996c ("PCI: host: Mark PCIe/PCI (MSI) IRQ cascade
handlers as IRQF_NO_THREAD"), we should mark PCIe/PCI (MSI) IRQ cascade
handlers in designware, qcom, and vmd as IRQF_NO_THREAD explicitly.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>	# vmd
Acked-by: Jingoo Han <jingoohan1@gmail.com>	# pcie-designware-plat.c
2017-07-02 18:38:49 -05:00
Lorenzo Pieralisi 60eca198b1 PCI: designware: Drop pci_fixup_irqs()
Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now
allocated in the pci_assign_irq() callback automatically, PCI host bridge
drivers can stop relying on pci_fixup_irqs() for IRQ allocation.

Drop pci_fixup_irqs() usage from PCI designware host bridge driver.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
2017-07-02 16:51:18 -05:00
Lorenzo Pieralisi 295aeb98a3 PCI: designware: Convert PCI scan API to pci_scan_root_bus_bridge()
The introduction of pci_scan_root_bus_bridge() provides a PCI core API to
scan a PCI root bus backed by an already initialized struct pci_host_bridge
object, which simplifies the bus scan interface and makes the PCI scan root
bus interface easier to generalize as members are added to the struct
pci_host_bridge.

Convert PCI designware host code to pci_scan_root_bus_bridge() to improve
the PCI root bus scanning interface.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
2017-07-02 16:14:23 -05:00
Lucas Stach 415b6185c5 PCI: imx6: Fix config read timeout handling
Commit cc7b0d4955 ("PCI: designware: Update PCI config space remap
function") made PCI configuration requests non-posted, which means we now
get a synchronous abort when the CFG space read to probe for downstream
devices times out.

Synchronous aborts need to be handled differently from the async aborts we
were getting before, in particular the PC needs to be advanced when
resolving the abort.  This is mostly a copy of what other PCI drivers do on
ARM to handle those aborts.

[bhelgaas: changelog, "Fixes"]
Fixes: cc7b0d4955 ("PCI: designware: Update PCI config space remap function")
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2017-05-22 17:06:30 -05:00
Linus Torvalds 857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Brian Norris a5f40e8098 PCI: Don't allow unbinding host controllers that aren't prepared
Many PCI host controller drivers aren't prepared to have their devices
unbound from them forcefully (e.g., through /sys/.../<driver>/unbind), as
they don't provide any driver .remove callback, where they'd detach the
root bus, release resources, etc. Keeping the driver built in (i.e., not a
loadable module) is not enough; and providing no .remove callback just
means we don't do any teardown.

To rule out the possibility of unbinding a device via sysfs, we need to set
the ".suppress_bind_attrs" field.

I found the suspect drivers via the following search:

  git grep -l platform_driver $(git grep -L -e '\.remove' -e suppress_bind_attrs drivers/pci/)

Then I inspected them to ensure that
(a) they set up a PCI bus in their probe() and
(b) they don't have a remove() callback for undoing the setup

Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:38:00 -05:00
Bjorn Helgaas 0b0ee66c4f Merge branch 'pci/ioremap' into next
* pci/ioremap:
  PCI: versatile: Update PCI config space remap function
  PCI: keystone-dw: Update PCI config space remap function
  PCI: layerscape: Update PCI config space remap function
  PCI: hisi: Update PCI config space remap function
  PCI: tegra: Update PCI config space remap function
  PCI: xgene: Update PCI config space remap function
  PCI: armada8k: Update PCI config space remap function
  PCI: designware: Update PCI config space remap function
  PCI: iproc-platform: Update PCI config space remap function
  PCI: qcom: Update PCI config space remap function
  PCI: rockchip: Update PCI config space remap function
  PCI: spear13xx: Update PCI config space remap function
  PCI: xilinx-nwl: Update PCI config space remap function
  PCI: xilinx: Update PCI config space remap function
  PCI: ECAM: Map config region with pci_remap_cfgspace()
  PCI: Implement devm_pci_remap_cfgspace()
  devres: fix devm_ioremap_*() offset parameter kerneldoc description
  ARM: Implement pci_remap_cfgspace() interface
  ARM64: Implement pci_remap_cfgspace() interface
  linux/io.h: Add pci_remap_cfgspace() interface
  PCI: Remove __weak tag from pci_remap_iospace()
2017-04-28 10:34:05 -05:00
Bjorn Helgaas 7284a62dfd Merge branch 'pci/host-imx6' into next
* pci/host-imx6:
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  PCI: imx6: Do not switch speed if Gen2 is disabled
  PCI: imx6: Do not wait for speed change on i.MX7
  PCI: imx6: Allow probe deferral by reset GPIO
  PCI: imx6: Add code to support i.MX7D
2017-04-28 10:32:54 -05:00
Kishon Vijay Abraham I f7a2757f6c PCI: dwc: dra7xx: Workaround for errata id i870
According to errata i870, access to the PCIe slave port that are not 32-bit
aligned will result in incorrect mapping to TLP Address and Byte enable
fields.

Accessing non 32-bit aligned data causes incorrect data in the target
buffer if memcpy is used. Implement the workaround for this errata here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:23:18 -05:00
Kishon Vijay Abraham I 608793e27b PCI: dwc: dra7xx: Add EP mode support
The PCIe controller integrated in dra7xx SoCs is capable of operating in
endpoint mode. Add endpoint mode support to dra7xx driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:23:17 -05:00
Kishon Vijay Abraham I 5ffd90a035 PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
No functional change. Split dra7xx_pcie_enable_interrupts() into
dra7xx_pcie_enable_wrapper_interrupts() and
dra7xx_pcie_enable_msi_interrupts() so that wrapper interrupts and MSI
interrupts can be enabled independently.  This is in preparation for adding
EP mode support to dra7xx driver since EP mode doesn't have to enable
msi_interrupts.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:23:17 -05:00
Kishon Vijay Abraham I f8aed6ec62 PCI: dwc: designware: Add EP mode support
Add endpoint mode support to designware driver. This uses the EP Core layer
introduced recently to add endpoint mode support.  *Any* function driver
can now use this designware device in order to achieve the EP
functionality.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28 10:23:16 -05:00
Colin Ian King 7221547e55 PCI: imx6: Fix spelling mistake: "contol" -> "control"
Trivial fix to spelling mistake in dev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.Zhu@nxp.com>
2017-04-25 14:01:16 -05:00
Lorenzo Pieralisi 89874a1a6e PCI: keystone-dw: Update PCI config space remap function
PCI configuration space should be mapped with a memory region type that
generates on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
2017-04-24 13:53:18 -05:00
Lorenzo Pieralisi 01bd489dba PCI: layerscape: Update PCI config space remap function
PCI configuration space should be mapped with a memory region type that
generates on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
2017-04-24 13:53:17 -05:00
Lorenzo Pieralisi e313a447e7 PCI: hisi: Update PCI config space remap function
PCI configuration space should be mapped with a memory region type that
generates on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
2017-04-24 13:53:17 -05:00
Lorenzo Pieralisi 53dfa17dfe PCI: armada8k: Update PCI config space remap function
PCI configuration space should be mapped with a memory region type that
generates on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-04-24 13:53:16 -05:00
Lorenzo Pieralisi cc7b0d4955 PCI: designware: Update PCI config space remap function
PCI configuration space should be mapped with a memory region type that
generates on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
2017-04-24 13:53:16 -05:00
Lorenzo Pieralisi 10c736f784 PCI: qcom: Update PCI config space remap function
PCI configuration space should be mapped with a memory region type that
generates on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
2017-04-24 13:53:15 -05:00
Lorenzo Pieralisi 05043c89ef PCI: spear13xx: Update PCI config space remap function
PCI configuration space should be mapped with a memory region type that
generate on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
2017-04-24 13:53:15 -05:00
Dongdong Liu b9c1153f7a PCI: hisi: Fix DT binding (hisi-pcie-almost-ecam)
The "hisilicon,pcie-almost-ecam" binding goes against the usual DT
conventions, and is non-sensical in that it describes the IP based on
what it isn't.  Fix the DT binding with "hisilicon,hip06-pcie-ecam"
and "hisilicon,hip07-pcie-ecam".

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-12 10:46:47 -05:00
Andrey Smirnov 93b226f9c6 PCI: imx6: Do not switch speed if Gen2 is disabled
Save a bit of time and avoid going through link speed change procedure in
configuration where link max speed is limited to Gen1 in DT.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: yurovsky@gmail.com
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
2017-04-04 17:58:33 -05:00
Andrey Smirnov e6dcd87fff PCI: imx6: Do not wait for speed change on i.MX7
As can be seen from [1]:

  "...the different behavior between iMX6Q PCIe and iMX7D PCIe maybe caused
  by the different controller version.

  Regarding to the DOC description, the DIRECT_SPEED_CHANGE should be
  cleared after the speed change from GEN1 to GEN2. Unfortunately, when
  GEN1 device is used, the behavior is not documented.

  So, IC design guys run the simulation and find out the following
  behaviors:

     1. DIRECT_SPEED_CHANGE will be cleared in 7D after speed change
     	from GEN1 to GEN2. This matches doc’s description

     2. set MAX link speed(PCIE_CAP_TARGET_LINK_SPEED=0x01) as GEN1 and
     	re-run the simulation, DIRECT_SPEED_CHANGE will not be cleared;
     	remain as 1, this matches your result, but function test is
     	passed, so this bit should not affect the normal PCIe function."

imx6_pcie_wait_for_speed_change() will report false failures for Gen1 ->
Gen1 speed transition, so avoid doing that check and just rely on
imx6_pcie_wait_for_link() only.

[1] https://community.nxp.com/message/867943

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: yurovsky@gmail.com
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
2017-04-04 17:56:41 -05:00
Andrey Smirnov bde4a5a00e PCI: imx6: Allow probe deferral by reset GPIO
Some designs implement reset GPIO via a GPIO expander connected to a
peripheral bus.  One such example would be i.MX7 Sabre board where said
GPIO is provided by SPI shift register connected to a bitbanged SPI bus.
To support such designs, allow reset GPIO request to defer probing of the
driver.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: yurovsky@gmail.com
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
2017-04-04 17:54:21 -05:00
Andrey Smirnov 9b3fe6796d PCI: imx6: Add code to support i.MX7D
Add various bits of code needed to support i.MX7D variant of the IP.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: yurovsky@gmail.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
2017-04-04 17:50:07 -05:00
Keerthy d4c7d1a089 PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe
Currently devm_request_irq() is being called before base, PCI fields of
dra7xx_pcie structure are populated. It is called even before
pm_runtime_enable() and pm_runtime_get_sync() are called. This will lead
to exceptions if in case an interrupt is triggered before the all of the
above are done. Hence push the devm_request_irq() call to the end of the
probe.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-04 08:41:30 -05:00
Kishon Vijay Abraham I edd45e3968 PCI: dwc: designware: Move _unroll configurations to a separate function
No functional change. Rename dw_pcie_writel_unroll/dw_pcie_readl_unroll to
dw_pcie_writel_ob_unroll/dw_pcie_readl_ob_unroll respectively as these
functions are used to perform only outbound configurations. Also move
these _unroll configurations to a separate function.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-04 08:41:07 -05:00
Kishon Vijay Abraham I a509d7d9af PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes
Previously dbi accessors can be used to access data of size 4 bytes. But
there might be situations (like accessing MSI_MESSAGE_CONTROL in order to
set/get the number of required MSI interrupts in EP mode) where dbi
accessors must be used to access data of size 2. This is in preparation
for adding endpoint mode support to designware driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
2017-04-04 08:40:55 -05:00
Kishon Vijay Abraham I b50b2db266 PCI: dwc: all: Modify dbi accessors to take dbi_base as argument
dwc has 2 dbi address space labeled dbics and dbics2. The existing helper
to access dbi address space can access only dbics. However dbics2 has to
be accessed for programming the BAR registers in the case of EP mode. This
is in preparation for adding EP mode support to dwc driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
2017-04-04 08:40:12 -05:00
Kishon Vijay Abraham I 62c5549fc4 PCI: dwc: artpec6: Populate cpu_addr_fixup ops
Populate cpu_addr_fixup ops to extract the least 28 bits of the
corresponding CPU address.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
2017-04-04 08:40:12 -05:00
Kishon Vijay Abraham I 2ed6cc71e6 PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
Populate cpu_addr_fixup ops to extract the least 28 bits of the
corresponding CPU address.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
2017-04-04 08:40:12 -05:00
Kishon Vijay Abraham I a660083eb0 PCI: dwc: designware: Add new *ops* for CPU addr fixup
Some platforms (like dra7xx) require only the least 28 bits of the
corresponding 32 bit CPU address to be programmed in the address
translation unit. This modified address is stored in io_base/mem_base/
cfg0_base/cfg1_base in dra7xx_pcie_host_init(). While this is okay for
host mode where the address range is fixed, device mode requires different
addresses to be programmed based on the host buffer address.  Add a new
ops to get the least 28 bits of the corresponding 32 bit CPU address and
invoke it before programming the address translation unit.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
2017-04-04 08:30:10 -05:00
Dan Carpenter 1b497e6493 PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()
The bug is that "val" is unsigned long but we only initialize 32 bits of
it.  Then we test "if (val)" and that might be true not because we set the
bits but because some were never initialized.

Fixes: f342d940ee ("PCI: exynos: Add support for MSI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-04 08:29:56 -05:00
Bjorn Helgaas dbe4a09e8b PCI: dwc: Unindent dw_handle_msi_irq() loop
Use "continue" to skip rest of the loop when possible to save an indent
level.  No functional change intended.

Suggested-by: walter harms <wharms@bfs.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-04 08:29:55 -05:00
Niklas Cassel 794a8604fe PCI: dwc: Fix dw_pcie_ops NULL pointer dereference
Fix a crash from dereferencing a NULL dw_pcie_ops pointer.  For example,
on ARTPEC-6:

  Unable to handle kernel NULL pointer dereference at virtual address 00000004
  pgd = c0204000
  [00000004] *pgd=00000000
  Internal error: Oops: 5 [#1] SMP ARM
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-next-20170321 #1
  Hardware name: Axis ARTPEC-6 Platform
  task: db098000 task.stack: db096000
  PC is at dw_pcie_writel_dbi+0x2c/0xd0

Prior to 442ec4c04d ("PCI: dwc: all: Split struct pcie_port into
host-only and core structures"), every driver had a struct pcie_host_ops
with function pointers, typically used as:

  if (pp->ops->readl_rc)
    return pp->ops->readl_rc(...);

442ec4c04d split struct pcie_host_ops into two pieces: struct
dw_pcie_host_ops and struct dw_pcie_ops, so the above became:

  if (pci->ops->readl_dbi)
    return pci->ops->readl_dbi(...);

But pcie-artpec6.c and pcie-designware-plat.c don't need the dw_pcie_ops
pointers and didn't supply a pci->ops struct, which leads to NULL pointer
dereferences.

Supply an empty struct dw_pcie_ops to avoid the NULL pointer dereferences.

[bhelgaas: changelog]
Fixes: 442ec4c04d ("PCI: dwc: all: Split struct pcie_port into host-only and core structures")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
2017-04-04 08:24:25 -05:00