Commit Graph

17 Commits

Author SHA1 Message Date
Eric Miao 198fc108ee [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
PXA27x and later processors support overlay1 and overlay2 on-top of the
base framebuffer (although under-neath the base is also possible). They
support palette and no-palette RGB formats, as well as YUV formats (only
available on overlay2). These overlays have dedicated DMA channels and
behave in a similar way as a framebuffer.

This heavily simplified and re-structured work is based on the original
pxafb_overlay.c (which is pending for mainline merge for a long time).

The major problems with this pxafb_overlay.c are (if you are interested
in the history):

  1. heavily redundant (the control logics for overlay1 and overlay2 are
     actually identical except for some small operations,  which are now
     abstracted into a 'pxafb_layer_ops' structure)

  2. a lot of useless and un-tested code (two workarounds which are now
     fixed on mature silicons)

  3. cursorfb is actually useless, hardware cursor should not be used
     this way, and the code was actually un-tested for a long time.

The code in this patch should be self-explanatory, I tried to add minimum
comments. As said, this is basically simplified, there are several things
still on the pending list:

  1. palette mode is un-supported and un-tested (although re-using the
     palette code of the base framebuffer is actually very easy now with
     previous clean-up patches)

  2. fb_pan_display for overlay(s) is un-supported

  3. the base framebuffer can actually be abstracted by 'pxafb_layer' as
     well, which will help further re-use of the code and keep a better
     and consistent structure. (This is the reason I named it 'pxafb_layer'
     instead of 'pxafb_overlay' or something alike)

See Documentation/fb/pxafb.txt for additional usage information.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 18:00:04 +08:00
Eric Miao 3f16ff608a [ARM] pxafb: cleanup of the timing checking code
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao 6e354846e8 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
dma branching is enabled by extending the current setup_frame_dma()
function to allow a 2nd set of frame/palette dma descriptors to be
used.

As a result, pxafb_dma_buff.dma_desc[], pxafb_dma_buff.pal_desc[]
and pxafb_info.fdadr[] are doubled.

This allows maximum re-use of the current dma setup code, although
the pxafb_info.fdadr[xx] for FBRx register values looks a bit odd.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao 77e196752b [ARM] pxafb: allow video memory size to be configurable
The amount of video memory size is decided according to the following
order:

1. <xres> x <yres> x <bits_per_pixel> by default, which is the backward
   compatible way

2. size specified in platform data

3. size specified in module parameter 'options' string or specified in
   kernel boot command line (see updated Documentation/fb/pxafb.txt)

And now since the memory is allocated from system memory, the pxafb_mmap
can be removed and the default fb_mmap() should be working all right.

Also, since we now have introduced the 'struct pxafb_dma_buff' for DMA
descriptors and palettes, the allocation can be separated cleanly.

NOTE: the LCD DMA actually supports chained transfer (i.e. page-based
transfers), to simplify the logic and keep the performance (with less
TLB misses when accessing from memory mapped user space), the memory
is allocated by alloc_pages_*() to ensures it's physical contiguous.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:16 +08:00
Eric Miao a5718a14a1 [ARM] pxafb: make {backlight,lcd}_power() members of struct pxafb_info
instead of holding them as static pointers.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:43:47 +08:00
Matthias Kaehlcke b91dbce56a pxafb: convert ctrlr_sem in a mutex
The semaphore ctrlr_sem is used as a mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:37 -07:00
Eric Miao 3c42a44910 pxafb: preliminary smart panel interface support
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:32 -07:00
Eric Miao 90eabbf0ec pxafb: move parallel LCD timing setup into dedicate function
the new_regs stuff has been removed, and all the setup (modification to those
fbi->reg_*) is protected with IRQ disabled

   * disable IRQ is too heavy here, provided that no IRQ context will
     touch the fbi->reg_* and the only possible contending place is
     in the CPUFREQ_POSTCHANGE (task context), a mutex will be better,
     leave this for future improvement

Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:32 -07:00
Eric Miao 2ba162b933 pxafb: use completion for LCD disable wait code
Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:32 -07:00
eric miao 2c42dd8ebd pxafb: introduce "struct pxafb_dma_buff" for palette and dma descriptors
Use structure and array for palette buffer and dma descriptors to:

1. better organize code for future expansion like overlays
2. separate palette and dma descriptors from frame buffer

Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:31 -07:00
eric miao ce4fb7b892 pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}
This is part of the effort moving peripheral registers outside of pxa-regs.h,
and using ioremap() make it possible the same IP can be re-used on different
processors with different registers space

As a result, the fixed mapping in pxa_map_io() is removed.

The regs-lcd.h can actually moved to where closer to pxafb.c but some of its
bit definitions are directly used by various platform code, though this is not
a good style.

Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:31 -07:00
Hans J. Koch 9ffa739606 pxafb: Add support for other palette formats
This patch adds support for the other three palette formats possible with
the PXA LCD controller. This is required on boards where an LCD is connected
with all its 18 bits. With this patch, it's possible to use an 8-bit mode
with 18-bit palette entries. This used to be possible in 2.4 kernels but
disappeared in 2.6. With current kernels, you can only get wrong colours
out of an LCD connected this way.

Users can choose the palette format by doing something like this
in their board definition:

static struct pxafb_mach_info my_fb_info = {
        [...]
        .lccr3          = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_PDFOR_3,
        .lccr4          = LCCR4_PAL_FOR_2,
        [...]
};

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:15 -07:00
Russell King 72e3524c0b [ARM] pxa: update pxafb to use clk support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 21:14:56 +01:00
Richard Purdie d14b272bc6 [ARM] 3848/1: pxafb: Add option of fixing video modes and spitz QVGA mode support
Add the ability to have pxafb use only certain fixed video modes
(selected on a per platform basis). This is useful on production
hardware such as the Zaurus cxx00 models where the valid modes are
known in advance and any other modes could result in hardware damage.

Following this, add support for the cxx00 QVGA mode. Mode information
is passed to the lcd_power call to allowing the panel drivers to
configure the display hardware accordingly (corgi_lcd already contains
the functionality for the cxx00 panel).

This mirrors the setup already used by w100fb.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-02 13:33:37 +01:00
Russell King ca5da71062 [ARM] pxafb: Remove #if DEBUG, convert DPRINTK to pr_debug
Fix warning:
 drivers/video/pxafb.h:119:5: warning: "DEBUG" is not defined
by removing the whole
 #if DEBUG
 #define DPRINTK(fmt, args...) printk...etc...
 #else
 #define DPRINTK(fmt, args...)
 #endif
stuff - we have pr_debug() for this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 09:44:54 +01:00
Richard Purdie ba44cd2d8a [PATCH] pxafb: Add hsync time reporting hook
To solve touchscreen interference problems devices like the Sharp Zaurus
SL-C3000 need to know the length of the horitzontal sync pulses.  This patch
adds a hook to pxafb so the touchscreen driver can function correctly.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:40 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00