Commit Graph

68 Commits

Author SHA1 Message Date
Mark Brown 0ac402fdaa mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board
This allows the regulator API to power off unused regulators at the end
of init.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 13:03:56 +02:00
Mark Brown 132d3f950e mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board
Otherwise we'd need massive ifdefs in the code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 13:03:56 +02:00
Ilya Yanok 248ca85f01 qong: remove AIPS[12] mappings from machine-specific iotable
AIPS[12] are no mapped from generic MX3 code so we don't need to
map them from machine-specific map_io function anymore.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-04-16 12:57:15 +02:00
Mark Brown 9070e7afb8 mx31ads: imoux pins should be passed in as unsigned int
To match the mxc_iomux_setup_multiple_pins() prototype.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 12:57:15 +02:00
Sascha Hauer f8e5143be7 pcm037 board support: Fix eth interrupt gpio setting
gpio_direction_input needs the gpio number, not the pin description.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:13 +02:00
Guennadi Liakhovetski b71df97a3f V4L/DVB (11349): mx3-camera: adapt the clock definition and the driver to the new clock naming
With the i.MX31 transition to clkdev clock names have changed, but mistakenly
the "mx3-camera.0" has been registered with a non-NULL connection ID, which is
not necessary, since this is the only clock, used by the capture interface
driver. Fix the clock definition and the driver to use NULL as a connection ID.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:43:58 -03:00
Steve Glendinning 4353318ed5 arm: convert pcm037 platform to use smsc911x
Updated to also specify SMSC911X_FORCE_INTERNAL_PHY, as the external phy
detection hardware strap is incorrectly pulled high on this platform.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-02 18:21:15 +01:00
Ilya Yanok 148854c65e qong: basic support for Dave/DENX QongEVB-LITE board
This patch adds basic support for Dave/DENX QongEVB-LITE i.MX31-based
board. It includes support for clocks initialization, UART1, NOR-flash,
FPGA-attached NAND flash and DNET ethernet controller (inside FPGA).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:35:05 +01:00
Sascha Hauer f2cb641f56 pcm037: Add sdhc support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:38 +01:00
Sascha Hauer 2adc1d654e MX31: Add sdhc resources/platform devices
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:37 +01:00
Sascha Hauer 9eb2eb8c40 MX31 clkdev support
This patch adds clkdev support for i.MX31. This is done in a
similar way done previously for i.MX27

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:32 +01:00
Sascha Hauer fb4416ad61 [ARM] MX31: Move static virtual mappings of AIPS1/2 to common file
On MX31 we can't do much without mapping the AIPS1/2 register space.
Move these mappings from individual boards to plat-mxc/mm.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:30 +01:00
Sascha Hauer cb88214d72 [ARM] MX31/MX35: Add l2x0 cache support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:29 +01:00
Sascha Hauer 9536ff3361 [ARM] MX35 devices support
The i.MX35 basically features the same peripherals as the i.MX31 with
some differences:

- The i.MX35 has a FEC ethernet controller
- The NAND controller base addresses are different
- The i.MX35 has only 3 UARTs

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:28 +01:00
Sascha Hauer 2cb536d13c [ARM] MX35: add clock support
This patch adds clock support for i.MX35 SoCs. We do not support setting
of clock rates yet, but most interesting clock rates should be reported.
I couldn't test all clock rates and the datasheet contains some obvious
bugs, so expect some bugs in this code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:28 +01:00
Sascha Hauer cb8ebb0223 [ARM] add i.MX35 build support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:27 +01:00
Sascha Hauer 198016e1b1 [ARM] MXC: add cpu_is_ macros
We had hardcoded cpu_is_ macros for mxc architectures till now. As we
want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_
macros which expand to 0 or 1 if only one architecture is compiled in and
only check for the cpu type if more than one architecture is compiled
in.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:26 +01:00
Valentin Longchamp ca489f8e4a mx31: add dma and fb devices
This adds the dma (ipu_dma) and fb devices for the mx31 for which drivers now are
available.

v2: merge the ipu and fb device in the same patch as suggested by Sascha

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:22 +01:00
Valentin Longchamp e00f0b4a93 mx31moboard: initial support for various baseboards
This enables our mx31moboard to be used on the different baseboards that
we are developping according to the application needs. There are not
many differences between the boards for now, but when other peripherals
are available for mx31 the differences are going to grow.

v2: takes Sascha's comments into account

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:21 +01:00
Holger Schurig 6bbdbf2f95 arm/imx: Kconfig beautification
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:18 +01:00
Sascha Hauer 87bbb19721 [ARM] mxc: add missing include
include devices.h from devices.c to avoid inconsistencies and to fix
sparse warnings

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:17 +01:00
Sascha Hauer 792067507b [ARM] PCM037 Board: Add I2C support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:15 +01:00
Mark Brown fe7316bff1 mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module
The i.MX31ADS supports pluggable PMU modules, including the WM835x based
Wolfson Microelectronics 1133-EV1. These boards provide power, audio,
RTC and watchdiog services to the system. This patch adds initial support
for those boards in I2C mode.

Currently support is limited by the available support for the features
of the i.MX31 in the mainline kernel.  Some further work will be needed
once other PMU modules are supported and once there is SPI support.
Many of the regulator constraints will be sharable with other PMU
boards.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:05 +01:00
Valentin Longchamp bab389c875 pcm037: use of new iomux implementation
This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:04 +01:00
Valentin Longchamp 63d976672e mx31pdk: use of new iomux implementation
This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:03 +01:00
Valentin Longchamp 945c10b87c mx31ads: use of new iomux implementation
This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:02 +01:00
Valentin Longchamp bfbc6a1fc1 mx31moboard: use of new iomux implementation
This example takes advantage of the possibility to use tables of iomux
configs.
This is inspired from mx1-mx2 iomux code. It allows a better code
readability.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:01 +01:00
Valentin Longchamp b7222631c3 mx31: rework of iomux support
This new implemenatation avoids that two physical pins are claimed by
the same driver (also with the the gpr hardware modes).
The gpio kernel lib is also called when a capable gpio pin is assigned
its gpio function.
The mxc_iomux_mode function is still here for backward compatibility but
should not be used anymore.

V2:

In the precendent revision, the iomux code was claiming a pin when its
hardware mode was changed. This was uncorrect: when the hardware mode is
changed, the pin must still be claimed through the iomux.

In order to have a pin working in mode hw2, we must fist issue the
mxc_iomux_set_gpr call and then the corresponding mxc_iomux_mode calls
with the FUNC mode (usually done with mxc_iomux_setup_multiple_pins).
The reverse calls must be done to fee the pins.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:00 +01:00
Mark Brown 8b785b9dfb mx31ads: Make unexported data static
Keeps sparse happy.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:57 +01:00
Mark Brown 39d1dc068b mx31: Add device definitions for the i.MX3x I2C controllers
The i.MX I2C driver has not yet been merged into mainline but it is
near to that and the device defintions don't depend directly on it
so we can add the devices now.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:56 +01:00
Sascha Hauer e65fb0099f [ARM] MXC: remove _clk suffix from clock names
The context makes it clear already that these are clocks, so there's
no need for such a suffix. This patch only changes the clocks actually
used in the tree. The remaining clocks are renamed in the subsequent
architecture specific patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:48 +01:00
Sascha Hauer 30c730f8f9 [ARM] MXC: rework timer/clock initialisation
- rename mxc_clocks_init to architecture specific versions. This
  allows us to have more than one architecture compiled in.
- call mxc_timer_init from clock initialisation instead from board
  code

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:47 +01:00
Sascha Hauer a2865197a5 [ARM] MXC: Use a single function for decoding a PLL
We had 3 versions of this function in clock support for MX1/2/3
Use a single one instead. I picked the one from the MX3 as it seems
to calculate more accurate as the other ones. Also, on MX27 and MX31 mfn
can be negative, this hasn't been handled correctly on MX27 since now.

This patch has been tested on MX27 and MX31 and produces the same clock
frequencies for me.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:46 +01:00
Russell King 80b02c172b [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c
arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function)
arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB'
arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function)
arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function)
arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function)
arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function)
arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction'
arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function)
arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function)
arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function)
arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function)
...

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08 16:29:42 +00:00
Sascha Hauer a244909152 [ARM] MXC: do not include mach/hardware.h from mach/memory.h
Instead of including other header files, define PHYS_OFFSET directly

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18 16:40:14 +01:00
Sascha Hauer 9d631b835f [ARM] MXC: remove dependency to other include files from irqs.h
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and
switches to more meaningful names for the irq related macros.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18 16:40:11 +01:00
Valentin Longchamp 988d2d49f7 [ARM] MX31: basic support for mx31moboard platform
Initial support for mx31moboard platfor with 3 serial ports
and NOR Flash

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:19 +01:00
Sascha Hauer 3287abbd71 [ARM] pcm037: add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:14 +01:00
Sascha Hauer cb96cf1ad6 [ARM] MX3: add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:02 +01:00
Fabio Estevam 1553a1ec83 Add basic support for MX31PDK board.
Add basic support to the MX31PDK development board, also known
as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:57 +01:00
Sascha Hauer 3dad21a95b [ARM] pcm037: Add support for SRAM device
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:56 +01:00
Guennadi Liakhovetski ba54b95899 [ARM] pcm037: add support for the on-board LAN9217 network controller
smc911x now also supports LAN921{5,7,8} network controllers.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:55 +01:00
Guennadi Liakhovetski 4a7b98d7e7 i.MX31: fix mxc_iomux_set_pad()
mxc_iomux_set_pad() is buggy on i.MX31 - it calculates the register and
the offset therein wrongly. Fix it.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:24 +01:00
Sascha Hauer d517cab1c7 [ARM] pcm037: add 1wire support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:02 +00:00
Sascha Hauer a840592933 [ARM] MX31: add w1 platform_device and resources
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:02 +00:00
Sascha Hauer 2eca047b28 [ARM] mx31ads: Add missing include
mx31ads_defconfig compilation failed with

arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart':
arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function)
arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once
arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.)
make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1

Add missing include

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30 15:58:09 +01:00
Sascha Hauer 6c1249e588 [ARM] pcm037: map AIPS1 and AIPS2 as nonshared area
The internal devices of the MX3 Processor have to be mapped
MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30 09:42:24 +01:00
Russell King c97f68145e Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.git
Merge branch 'davinci' into devel
2008-10-09 21:33:05 +01:00
Russell King b1add0480a Merge branch 'for-rmk' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git
Merge branch 'imx-devel' into devel
2008-10-09 21:33:03 +01:00
Russell King 9b727abdff [ARM] Remove MT_NONSHARED_DEVICE alias
Use MT_DEVICE_NONSHARED instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 16:41:07 +01:00