Commit Graph

59 Commits

Author SHA1 Message Date
Roopa Prabhu b16fb418b1 net: fib_rules: add extack support
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23 10:21:24 -04:00
David Ahern b75cc8f90f net/ipv6: Pass skb to route lookup
IPv6 does path selection for multipath routes deep in the lookup
functions. The next patch adds L4 hash option and needs the skb
for the forward path. To get the skb to the relevant FIB lookup
functions it needs to go through the fib rules layer, so add a
lookup_data argument to the fib_lookup_arg struct.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 13:04:22 -05:00
Roopa Prabhu 5f6f845b60 fib_rules: FRA_GENERIC_POLICY updates for ip proto, sport and dport attrs
Fixes: bfff486265 ("net: fib_rules: support for match on ip_proto, sport and dport")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 21:14:18 -05:00
Roopa Prabhu bfff486265 net: fib_rules: support for match on ip_proto, sport and dport
uapi for ip_proto, sport and dport range match
in fib rules.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 22:44:43 -05:00
Donald Sharp 1b71af6053 net: fib_rules: Add new attribute to set protocol
For ages iproute2 has used `struct rtmsg` as the ancillary header for
FIB rules and in the process set the protocol value to RTPROT_BOOT.
Until ca56209a66 ("net: Allow a rule to track originating protocol")
the kernel rules code ignored the protocol value sent from userspace
and always returned 0 in notifications. To avoid incompatibility with
existing iproute2, send the protocol as a new attribute.

Fixes: cac56209a6 ("net: Allow a rule to track originating protocol")
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 15:47:20 -05:00
Donald Sharp cac56209a6 net: Allow a rule to track originating protocol
Allow a rule that is being added/deleted/modified or
dumped to contain the originating protocol's id.

The protocol is handled just like a routes originating
protocol is.  This is especially useful because there
is starting to be a plethora of different user space
programs adding rules.

Allow the vrf device to specify that the kernel is the originator
of the rule created for this device.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 17:49:24 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Ido Schimmel 1b2a444085 net: fib_rules: Implement notification logic in core
Unlike the routing tables, the FIB rules share a common core, so instead
of replicating the same logic for each address family we can simply dump
the rules and send notifications from the core itself.

To protect the integrity of the dump, a rules-specific sequence counter
is added for each address family and incremented whenever a rule is
added or deleted (under RTNL).

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03 15:35:59 -07:00
Reshetova, Elena 717d1e993a net: convert fib_rule.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 07:39:09 -07:00
David Ahern c21ef3e343 net: rtnetlink: plumb extended ack to doit function
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse
for doit functions that call it directly.

This is the first step to using extended error reporting in rtnetlink.
>From here individual subsystems can be updated to set netlink_ext_ack as
needed.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17 15:35:38 -04:00
Ido Schimmel 3c71006d15 ipv4: fib_rules: Check if rule is a default rule
Currently, when non-default (custom) FIB rules are used, devices capable
of layer 3 offloading flush their tables and let the kernel do the
forwarding instead.

When these devices' drivers are loaded they register to the FIB
notification chain, which lets them know about the existence of any
custom FIB rules. This is done by sending a RULE_ADD notification based
on the value of 'net->ipv4.fib_has_custom_rules'.

This approach is problematic when VRF offload is taken into account, as
upon the creation of the first VRF netdev, a l3mdev rule is programmed
to direct skbs to the VRF's table.

Instead of merely reading the above value and sending a single RULE_ADD
notification, we should iterate over all the FIB rules and send a
detailed notification for each, thereby allowing offloading drivers to
sanitize the rules they don't support and potentially flush their
tables.

While l3mdev rules are uniquely marked, the default rules are not.
Therefore, when they are being notified they might invoke offloading
drivers to unnecessarily flush their tables.

Solve this by adding an helper to check if a FIB rule is a default rule.
Namely, its selector should match all packets and its action should
point to the local, main or default tables.

As noted by David Ahern, uniquely marking the default rules is
insufficient. When using VRFs, it's common to avoid false hits by moving
the rule for the local table to just before the main table:

Default configuration:
$ ip rule show
0:      from all lookup local
32766:  from all lookup main
32767:  from all lookup default

Common configuration with VRFs:
$ ip rule show
1000:   from all lookup [l3mdev-table]
32765:  from all lookup local
32766:  from all lookup main
32767:  from all lookup default

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 10:18:33 -07:00
Lorenzo Colitti 622ec2c9d5 net: core: add UID to flows, rules, and routes
- Define a new FIB rule attributes, FRA_UID_RANGE, to describe a
  range of UIDs.
- Define a RTA_UID attribute for per-UID route lookups and dumps.
- Support passing these attributes to and from userspace via
  rtnetlink. The value INVALID_UID indicates no UID was
  specified.
- Add a UID field to the flow structures.

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04 14:45:23 -04:00
David Ahern 96c63fa739 net: Add l3mdev rule
Currently, VRFs require 1 oif and 1 iif rule per address family per
VRF. As the number of VRF devices increases it brings scalability
issues with the increasing rule list. All of the VRF rules have the
same format with the exception of the specific table id to direct the
lookup. Since the table id is available from the oif or iif in the
loopup, the VRF rules can be consolidated to a single rule that pulls
the table from the VRF device.

This patch introduces a new rule attribute l3mdev. The l3mdev rule
means the table id used for the lookup is pulled from the L3 master
device (e.g., VRF) rather than being statically defined. With the
l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev
rule per address family (IPv4 and IPv6).

If an admin wishes to insert higher priority rules for specific VRFs
those rules will co-exist with the l3mdev rule. This capability means
current VRF scripts will co-exist with this new simpler implementation.

Currently, the rules list for both ipv4 and ipv6 look like this:
    $ ip  ru ls
    1000:       from all oif vrf1 lookup 1001
    1000:       from all iif vrf1 lookup 1001
    1000:       from all oif vrf2 lookup 1002
    1000:       from all iif vrf2 lookup 1002
    1000:       from all oif vrf3 lookup 1003
    1000:       from all iif vrf3 lookup 1003
    1000:       from all oif vrf4 lookup 1004
    1000:       from all iif vrf4 lookup 1004
    1000:       from all oif vrf5 lookup 1005
    1000:       from all iif vrf5 lookup 1005
    1000:       from all oif vrf6 lookup 1006
    1000:       from all iif vrf6 lookup 1006
    1000:       from all oif vrf7 lookup 1007
    1000:       from all iif vrf7 lookup 1007
    1000:       from all oif vrf8 lookup 1008
    1000:       from all iif vrf8 lookup 1008
    ...
    32765:      from all lookup local
    32766:      from all lookup main
    32767:      from all lookup default

With the l3mdev rule the list is just the following regardless of the
number of VRFs:
    $ ip ru ls
    1000:       from all lookup [l3mdev table]
    32765:      from all lookup local
    32766:      from all lookup main
    32767:      from all lookup default

(Note: the above pretty print of the rule is based on an iproute2
       prototype. Actual verbage may change)

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 11:36:02 -07:00
Phil Sutter f53de1e9a4 net: ipv6: use common fib_default_rule_pref
This switches IPv6 policy routing to use the shared
fib_default_rule_pref() function of IPv4 and DECnet. It is also used in
multicast routing for IPv4 as well as IPv6.

The motivation for this patch is a complaint about iproute2 behaving
inconsistent between IPv4 and IPv6 when adding policy rules: Formerly,
IPv6 rules were assigned a fixed priority of 0x3FFF whereas for IPv4 the
assigned priority value was decreased with each rule added.

Since then all users of the default_pref field have been converted to
assign the generic function fib_default_rule_pref(), fib_nl_newrule()
may just use it directly instead. Therefore get rid of the function
pointer altogether and make fib_default_rule_pref() static, as it's not
used outside fib_rules.c anymore.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09 14:19:50 -07:00
Thomas Graf e7030878fc fib: Add fib rule match on tunnel id
This add the ability to select a routing table based on the tunnel
id which allows to maintain separate routing tables for each virtual
tunnel network.

ip rule add from all tunnel-id 100 lookup 100
ip rule add from all tunnel-id 200 lookup 200

A new static key controls the collection of metadata at tunnel level
upon demand.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 10:39:06 -07:00
Andy Gospodarek 0eeb075fad net: ipv4 sysctl option to ignore routes when nexthop link is down
This feature is only enabled with the new per-interface or ipv4 global
sysctls called 'ignore_routes_with_linkdown'.

net.ipv4.conf.all.ignore_routes_with_linkdown = 0
net.ipv4.conf.default.ignore_routes_with_linkdown = 0
net.ipv4.conf.lo.ignore_routes_with_linkdown = 0
...

When the above sysctls are set, will report to userspace that a route is
dead and will no longer resolve to this nexthop when performing a fib
lookup.  This will signal to userspace that the route will not be
selected.  The signalling of a RTNH_F_DEAD is only passed to userspace
if the sysctl is enabled and link is down.  This was done as without it
the netlink listeners would have no idea whether or not a nexthop would
be selected.   The kernel only sets RTNH_F_DEAD internally if the
interface has IFF_UP cleared.

With the new sysctl set, the following behavior can be observed
(interface p8p1 is link-down):

default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1  proto kernel  scope link  src 10.0.5.15
70.0.0.0/24 dev p7p1  proto kernel  scope link  src 70.0.0.1
80.0.0.0/24 dev p8p1  proto kernel  scope link  src 80.0.0.1 dead linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1  metric 1 dead linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1  metric 2
90.0.0.1 via 70.0.0.2 dev p7p1  src 70.0.0.1
    cache
local 80.0.0.1 dev lo  src 80.0.0.1
    cache <local>
80.0.0.2 via 10.0.5.2 dev p9p1  src 10.0.5.15
    cache

While the route does remain in the table (so it can be modified if
needed rather than being wiped away as it would be if IFF_UP was
cleared), the proper next-hop is chosen automatically when the link is
down.  Now interface p8p1 is linked-up:

default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1  proto kernel  scope link  src 10.0.5.15
70.0.0.0/24 dev p7p1  proto kernel  scope link  src 70.0.0.1
80.0.0.0/24 dev p8p1  proto kernel  scope link  src 80.0.0.1
90.0.0.0/24 via 80.0.0.2 dev p8p1  metric 1
90.0.0.0/24 via 70.0.0.2 dev p7p1  metric 2
192.168.56.0/24 dev p2p1  proto kernel  scope link  src 192.168.56.2
90.0.0.1 via 80.0.0.2 dev p8p1  src 80.0.0.1
    cache
local 80.0.0.1 dev lo  src 80.0.0.1
    cache <local>
80.0.0.2 dev p8p1  src 80.0.0.1
    cache

and the output changes to what one would expect.

If the sysctl is not set, the following output would be expected when
p8p1 is down:

default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1  proto kernel  scope link  src 10.0.5.15
70.0.0.0/24 dev p7p1  proto kernel  scope link  src 70.0.0.1
80.0.0.0/24 dev p8p1  proto kernel  scope link  src 80.0.0.1 linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1  metric 1 linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1  metric 2

Since the dead flag does not appear, there should be no expectation that
the kernel would skip using this route due to link being down.

v2: Split kernel changes into 2 patches, this actually makes a
behavioral change if the sysctl is set.  Also took suggestion from Alex
to simplify code by only checking sysctl during fib lookup and
suggestion from Scott to add a per-interface sysctl.

v3: Code clean-ups to make it more readable and efficient as well as a
reverse path check fix.

v4: Drop binary sysctl

v5: Whitespace fixups from Dave

v6: Style changes from Dave and checkpatch suggestions

v7: One more checkpatch fixup

Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24 02:15:54 -07:00
Eric W. Biederman efd7ef1c19 net: Kill hold_net release_net
hold_net and release_net were an idea that turned out to be useless.
The code has been disabled since 2008.  Kill the code it is long past due.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 14:39:40 -04:00
Alexander Duyck 0ddcf43d5d ipv4: FIB Local/MAIN table collapse
This patch is meant to collapse local and main into one by converting
tb_data from an array to a pointer.  Doing this allows us to point the
local table into the main while maintaining the same variables in the
table.

As such the tb_data was converted from an array to a pointer, and a new
array called data is added in order to still provide an object for tb_data
to point to.

In order to track the origin of the fib aliases a tb_id value was added in
a hole that existed on 64b systems.  Using this we can also reverse the
merge in the event that custom FIB rules are enabled.

With this patch I am seeing an improvement of 20ns to 30ns for routing
lookups as long as custom rules are not enabled, with custom rules enabled
we fall back to split tables and the original behavior.

Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 16:22:14 -04:00
Joe Perches 8de6879fa9 fib_rules.h: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20 14:49:33 -04:00
Eric Dumazet fba3679d34 fib_rules: reorder struct fib_rules fields
Move refcnt, pref, suppress_ifgroup, suppress_prefixlen out of first
cache line, as they are not used in fast path.

Make sure ctarget & fr_net are in first cache line.

(Assuming 64 bit arches and 64 bytes cache lines)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 11:53:54 -07:00
Stefan Tomanek 73f5698e77 fib_rules: fix suppressor names and default values
This change brings the suppressor attribute names into line; it also changes
the data types to provide a more consistent interface.

While -1 indicates that the suppressor is not enabled, values >= 0 for
suppress_prefixlen or suppress_ifgroup  reject routing decisions violating the
constraint.

This changes the previously presented behaviour of suppress_prefixlen, where a
prefix length _less_ than the attribute value was rejected. After this change,
a prefix length less than *or* equal to the value is considered a violation of
the rule constraint.

It also changes the default values for default and newly added rules (disabling
any suppression for those).

Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 10:40:23 -07:00
Stefan Tomanek 6ef94cfafb fib_rules: add route suppression based on ifgroup
This change adds the ability to suppress a routing decision based upon the
interface group the selected interface belongs to. This allows it to
exclude specific devices from a routing decision.

Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02 15:24:22 -07:00
Stefan Tomanek 7764a45a8f fib_rules: add .suppress operation
This change adds a new operation to the fib_rules_ops struct; it allows the
suppression of routing decisions if certain criteria are not met by its
results.

The first implemented constraint is a minimum prefix length added to the
structures of routing rules. If a rule is added with a minimum prefix length
>0, only routes meeting this threshold will be considered. Any other (more
general) routing table entries will be ignored.

When configuring a system with multiple network uplinks and default routes, it
is often convinient to reference the main routing table multiple times - but
omitting the default route. Using this patch and a modified "ip" utility, this
can be achieved by using the following command sequence:

  $ ip route add table secuplink default via 10.42.23.1

  $ ip rule add pref 100            table main prefixlength 1
  $ ip rule add pref 150 fwmark 0xA table secuplink

With this setup, packets marked 0xA will be processed by the additional routing
table "secuplink", but only if no suitable route in the main routing table can
be found. By using a minimal prefixlength of 1, the default route (/0) of the
table "main" is hidden to packets processed by rule 100; packets traveling to
destinations with more specific routing entries are processed as usual.

Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-31 17:27:17 -07:00
David S. Miller 7a9bc9b81a ipv4: Elide fib_validate_source() completely when possible.
If rpfilter is off (or the SKB has an IPSEC path) and there are not
tclassid users, we don't have to do anything at all when
fib_validate_source() is invoked besides setting the itag to zero.

We monitor tclassid uses with a counter (modified only under RTNL and
marked __read_mostly) and we protect the fib_validate_source() real
work with a test against this counter and whether rpfilter is to be
done.

Having a way to know whether we need no tclassid processing or not
also opens the door for future optimized rpfilter algorithms that do
not perform full FIB lookups.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29 01:36:36 -07:00
Eric Dumazet 7a2b03c517 fib_rules: __rcu annotates ctarget
Adds __rcu annotation to (struct fib_rule)->ctarget

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:32 -07:00
Eric Dumazet ebc0ffae5d fib: RCU conversion of fib_lookup()
fib_lookup() converted to be called in RCU protected context, no
reference taken and released on a contended cache line (fib_clntref)

fib_table_lookup() and fib_semantic_match() get an additional parameter.

struct fib_info gets an rcu_head field, and is freed after an rcu grace
period.

Stress test :
(Sending 160.000.000 UDP frames on same neighbour,
IP route cache disabled, dual E5540 @2.53GHz,
32bit kernel, FIB_HASH) (about same results for FIB_TRIE)

Before patch :

real	1m31.199s
user	0m13.761s
sys	23m24.780s

After patch:

real	1m5.375s
user	0m14.997s
sys	15m50.115s

Before patch Profile :

13044.00 15.4% __ip_route_output_key vmlinux
 8438.00 10.0% dst_destroy           vmlinux
 5983.00  7.1% fib_semantic_match    vmlinux
 5410.00  6.4% fib_rules_lookup      vmlinux
 4803.00  5.7% neigh_lookup          vmlinux
 4420.00  5.2% _raw_spin_lock        vmlinux
 3883.00  4.6% rt_set_nexthop        vmlinux
 3261.00  3.9% _raw_read_lock        vmlinux
 2794.00  3.3% fib_table_lookup      vmlinux
 2374.00  2.8% neigh_resolve_output  vmlinux
 2153.00  2.5% dst_alloc             vmlinux
 1502.00  1.8% _raw_read_lock_bh     vmlinux
 1484.00  1.8% kmem_cache_alloc      vmlinux
 1407.00  1.7% eth_header            vmlinux
 1406.00  1.7% ipv4_dst_destroy      vmlinux
 1298.00  1.5% __copy_from_user_ll   vmlinux
 1174.00  1.4% dev_queue_xmit        vmlinux
 1000.00  1.2% ip_output             vmlinux

After patch Profile :

13712.00 15.8% dst_destroy             vmlinux
 8548.00  9.9% __ip_route_output_key   vmlinux
 7017.00  8.1% neigh_lookup            vmlinux
 4554.00  5.3% fib_semantic_match      vmlinux
 4067.00  4.7% _raw_read_lock          vmlinux
 3491.00  4.0% dst_alloc               vmlinux
 3186.00  3.7% neigh_resolve_output    vmlinux
 3103.00  3.6% fib_table_lookup        vmlinux
 2098.00  2.4% _raw_read_lock_bh       vmlinux
 2081.00  2.4% kmem_cache_alloc        vmlinux
 2013.00  2.3% _raw_spin_lock          vmlinux
 1763.00  2.0% __copy_from_user_ll     vmlinux
 1763.00  2.0% ip_output               vmlinux
 1761.00  2.0% ipv4_dst_destroy        vmlinux
 1631.00  1.9% eth_header              vmlinux
 1440.00  1.7% _raw_read_unlock_bh     vmlinux

Reference results, if IP route cache is enabled :

real	0m29.718s
user	0m10.845s
sys	7m37.341s

25213.00 29.5% __ip_route_output_key   vmlinux
 9011.00 10.5% dst_release             vmlinux
 4817.00  5.6% ip_push_pending_frames  vmlinux
 4232.00  5.0% ip_finish_output        vmlinux
 3940.00  4.6% udp_sendmsg             vmlinux
 3730.00  4.4% __copy_from_user_ll     vmlinux
 3716.00  4.4% ip_route_output_flow    vmlinux
 2451.00  2.9% __xfrm_lookup           vmlinux
 2221.00  2.6% ip_append_data          vmlinux
 1718.00  2.0% _raw_spin_lock_bh       vmlinux
 1655.00  1.9% __alloc_skb             vmlinux
 1572.00  1.8% sock_wfree              vmlinux
 1345.00  1.6% kfree                   vmlinux

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 20:39:38 -07:00
stephen hemminger 1df9916e46 fib: fib_rules_cleanup can be static
fib_rules_cleanup_ups is only defined and used in one place.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 00:47:39 -07:00
Patrick McHardy 3d0c9c4eb2 net: fib_rules: mark arguments to fib_rules_register const and __net_initdata
fib_rules_register() duplicates the template passed to it without modification,
mark the argument as const. Additionally the templates are only needed when
instantiating a new namespace, so mark them as __net_initdata, which means
they can be discarded when CONFIG_NET_NS=n.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-26 16:02:04 +02:00
Patrick McHardy d8a566beaa net: fib_rules: consolidate IPv4 and DECnet ->default_pref() functions.
Both functions are equivalent, consolidate them since a following patch
needs a third implementation for multicast routing.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13 14:49:30 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Eric W. Biederman e9c5158ac2 net: Allow fib_rule_unregister to batch
Refactor the code so fib_rules_register always takes a template instead
of the actual fib_rules_ops structure that will be used.  This is
required for network namespace support so 2 out of the 3 callers already
do this, it allows the error handling to be made common, and it allows
fib_rules_unregister to free the template for hte caller.

Modify fib_rules_unregister to use call_rcu instead of syncrhonize_rcu
to allw multiple namespaces to be cleaned up in the same rcu grace
period.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:22:55 -08:00
Patrick McHardy 1b038a5e60 net 03/05: fib_rules: add oif classification
commit 68144d350f4f6c348659c825cde6a82b34c27a91
Author: Patrick McHardy <kaber@trash.net>
Date:   Thu Dec 3 12:05:25 2009 +0100

    net: fib_rules: add oif classification

    Support routing table lookup based on the flow's oif. This is useful to
    classify packets originating from sockets bound to interfaces differently.

    The route cache already includes the oif and needs no changes.

    Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:14:36 -08:00
Patrick McHardy 491deb24bf net 02/05: fib_rules: rename ifindex/ifname/FRA_IFNAME to iifindex/iifname/FRA_IIFNAME
commit 229e77eec406ad68662f18e49fda8b5d366768c5
Author: Patrick McHardy <kaber@trash.net>
Date:   Thu Dec 3 12:05:23 2009 +0100

    net: fib_rules: rename ifindex/ifname/FRA_IFNAME to iifindex/iifname/FRA_IIFNAME

    The next patch will add oif classification, rename interface related members
    and attributes to reflect that they're used for iif classification.

    Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:14:36 -08:00
Patrick McHardy d285834001 net 01/05: fib_rules: rearrange struct fib_rule
commit b8952893d5d86f69c4e499d191b98c6658f64b0f
Author: Patrick McHardy <kaber@trash.net>
Date:   Thu Dec 3 12:05:22 2009 +0100

    net: fib_rules: rearrange struct fib_rule

    The ifname member is only used to resolve interface names and is not needed
    during rule lookups. The target and ctarget members however are used during
    rule lookups and are currently located in a second cacheline.

    Move ifname further to the end to make sure both target and ctarget are
    located in the same cacheline as other members used during rule lookups.

    The layout on 64 bit changes from:

    struct fib_rule {
    	...
            u32                        table;                /*    56     4 */
            u8                         action;               /*    60     1 */

            /* XXX 3 bytes hole, try to pack */

            /* --- cacheline 1 boundary (64 bytes) --- */
            u32                        target;               /*    64     4 */

            /* XXX 4 bytes hole, try to pack */

            struct fib_rule *          ctarget;              /*    72     8 */
            struct rcu_head            rcu;                  /*    80    16 */
            struct net *               fr_net;               /*    96     8 */
    };

    to:

    struct fib_rule {
    	...
            u32                        table;                /*    40     4 */
            u8                         action;               /*    44     1 */

            /* XXX 3 bytes hole, try to pack */

            u32                        target;               /*    48     4 */

            /* XXX 4 bytes hole, try to pack */

            struct fib_rule *          ctarget;              /*    56     8 */
            /* --- cacheline 1 boundary (64 bytes) --- */
            char                       ifname[16];           /*    64    16 */
            struct rcu_head            rcu;                  /*    80    16 */
            struct net *               fr_net;               /*    96     8 */

    };

    Signed-off-by: Patrick McHardy <kaber@trash.net>

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 12:14:34 -08:00
Eric Dumazet fd2c3ef761 net: cleanup include/net
This cleanup patch puts struct/union/enum opening braces,
in first line to ease grep games.

struct something
{

becomes :

struct something {

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:06:25 -08:00
Rami Rosen 04af8cf6f3 net: Remove unused parameter from fill method in fib_rules_ops.
The netlink message header (struct nlmsghdr) is an unused parameter in
fill method of fib_rules_ops struct.  This patch removes this
parameter from this method and fixes the places where this method is
called.

(include/net/fib_rules.h)

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 17:26:23 -07:00
Rami Rosen 8b3521eeb7 ipv4: remove an unused parameter from configure method of fib_rules_ops.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17 11:59:45 -07:00
Denis V. Lunev ae299fc051 net: add fib_rules_ops to flush_cache method
This is required to pass namespace context into rt_cache_flush called from
->flush_cache.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05 19:01:28 -07:00
Denis V. Lunev 3661a91083 [NETNS]: Add netns refcnt debug to fib rules.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 02:01:56 -07:00
Denis V. Lunev 51314a17ba [NETNS]: Process FIB rule action in the context of the namespace.
Save namespace context on the fib rule at the rule creation time and
call routing lookup in the correct namespace.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:14 -08:00
Denis V. Lunev 9e3a548781 [NETNS]: FIB rules API cleanup.
Remove struct net from fib_rules_register(unregister)/notify_change
paths and diet code size a bit.

add/remove: 0/0 grow/shrink: 10/12 up/down: 35/-100 (-65)
function                                     old     new   delta
notify_rule_change                           273     280      +7
trie_show_stats                              471     475      +4
fn_trie_delete                               473     477      +4
fib_rules_unregister                         144     148      +4
fib4_rule_compare                            119     123      +4
resize                                      2842    2845      +3
fn_trie_select_default                       515     518      +3
inet_sk_rebuild_header                       836     838      +2
fib_trie_seq_show                            764     766      +2
__devinet_sysctl_register                    276     278      +2
fn_trie_lookup                              1124    1123      -1
ip_fib_check_default                         133     131      -2
devinet_conf_sysctl                          223     221      -2
snmp_fold_field                              126     123      -3
fn_trie_insert                              2091    2086      -5
inet_create                                  876     870      -6
fib4_rules_init                              197     191      -6
fib_sync_down                                452     444      -8
inet_gso_send_check                          334     325      -9
fib_create_info                             3003    2991     -12
fib_nl_delrule                               568     553     -15
fib_nl_newrule                               883     852     -31

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:13 -08:00
Denis V. Lunev 0359238333 [FIB]: Add netns to fib_rules_ops.
The backward link from FIB rules operations to the network namespace
will allow to simplify the API a bit.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:13 -08:00
Denis V. Lunev 72132c1b6c [IPV4]: fib_rules_unregister is essentially void.
fib_rules_unregister is called only after successful register and the
return code is never checked.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:02:09 -08:00
Denis V. Lunev 868d13ac81 [NETNS]: Pass fib_rules_ops into default_pref method.
fib_rules_ops contains operations and the list of configured rules. ops will
become per/namespace soon, so we need them to be known in the default_pref
callback.

Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:22 -08:00
Denis V. Lunev f8c26b8d58 [NETNS]: Add netns parameter to fib_rules_(un)register.
The patch extends the different fib rules API in order to pass the
network namespace pointer. That will allow to access the different
tables from a namespace relative object. As usual, the pointer to the
init_net variable is passed as parameter so we don't break the
network.

Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:21 -08:00
Daniel Lezcano 9eb87f3f7e [IPV6]: Make fib6_rules_init to return an error code.
When the fib_rules initialization finished, no return code is provided
so there is no way to know, for the caller, if the initialization has
been successful or has failed. This patch fix that.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:56:46 -08:00
Denis V. Lunev 2994c63863 [INET]: Small possible memory leak in FIB rules
This patch fixes a small memory leak. Default fib rules can be deleted by
the user if the rule does not carry FIB_RULE_PERMANENT flag, f.e. by
	ip rule flush

Such a rule will not be freed as the ref-counter has 2 on start and becomes
clearly unreachable after removal.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-10 22:12:03 -08:00
Denis V. Lunev 76c72d4f44 [IPV4/IPV6/DECNET]: Small cleanup for fib rules.
This patch slightly cleanups FIB rules framework. rules_list as a pointer
on struct fib_rules_ops is useless. It is always assigned with a static
per/subsystem list in IPv4, IPv6 and DecNet.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:22 -07:00
Patrick McHardy ef7c79ed64 [NETLINK]: Mark netlink policies const
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:40:10 -07:00
Thomas Graf 73417f617a [NET] fib_rules: Flush route cache after rule modifications
The results of FIB rules lookups are cached in the routing cache
except for IPv6 as no such cache exists. So far, it was the
responsibility of the user to flush the cache after modifying any
rules. This lead to many false bug reports due to misunderstanding
of this concept.

This patch automatically flushes the route cache after inserting
or deleting a rule.

Thanks to Muli Ben-Yehuda <muli@il.ibm.com> for catching a bug
in the previous patch.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:28:18 -07:00