Commit Graph

1432 Commits

Author SHA1 Message Date
jerin jacob 0cc40dac86 MIPS: CMP: Fix physical core number calculation logic
The CPUNum Field in EBase register is 10bit wide, so after 1 bit right
shift, the mask value should be 0x1ff.

Signed-off-by: jerin jacob <jerinjacobk@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4420/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-18 11:45:41 +02:00
Linus Torvalds a5ef3f7dcb Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS update from Ralf Baechle:
 "Cleanups and fixes for breakage that occured earlier during this merge
  phase.  Also a few patches that didn't make the first pull request.
  Of those is the Alchemy work that merges code for many of the SOCs and
  evaluation boards thus among other code shrinkage, reduces the number
  of MIPS defconfigs by 5."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits)
  MIPS: SNI: Switch RM400 serial to SCCNXP driver
  MIPS: Remove unused empty_bad_pmd_table[] declaration.
  MIPS: MT: Remove kspd.
  MIPS: Malta: Fix section mismatch.
  MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.
  MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.
  MIPS: Alchemy: merge PB1550 support into DB1550 code
  MIPS: Alchemy: Single kernel for DB1200/1300/1550
  MIPS: Optimize TLB refill for RI/XI configurations.
  MIPS: proc: Cleanup printing of ASEs.
  MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.
  MIPS: Add detection of DSP ASE Revision 2.
  MIPS: Optimize pgd_init and pmd_init
  MIPS: perf: Add perf functionality for BMIPS5000
  MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP
  MIPS: perf: Remove unnecessary #ifdef
  MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)
  MIPS: perf: Change the "mips_perf_event" table unsupported indicator.
  MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.
  vmlinux.lds.h: Allow architectures to add sections to the front of .bss
  ...
2012-10-14 14:39:05 -07:00
Linus Torvalds d25282d1c9 Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...
2012-10-14 13:39:34 -07:00
Linus Torvalds 6c536a17fa KGDB/KDB fixes and cleanups
Cleanups
    Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
    Add module event hooks for simplified debugging with gdb
  Fixes
    Fix kdb to stop paging with 'q' on bta and dmesg
    Fix for data that scrolls off the vga console due to line wrapping
      when using the kdb pager
  New
    The debug core registers for kernel module events which allows a
      kernel aware gdb to automatically load symbols and break on entry
      to a kernel module
    Allow kgdboc=kdb to setup kdb on the vga console
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQeB8KAAoJEIciOldedpOjpbIP/j+LXEkzXKKfi/3m79VQ87DB
 5iUmTS84t84pomHamXX175AC0gA/2mC0FbbcHpqjlhxF4awXcviCNIiTdtSOTbbu
 G102naLHY8i77X+XbHuN2utJeaRLw8rsfMMZGmjJnjfpc4LtsaH0YTkUzbt3qvba
 N6/QvknadzIrmoCJvHipdOdsSmL0YmTS22+koG4es9B5jvOqVH/W7jZs1qRlVw96
 VxG5Psx4LPB+RI+ZwF1WwbGxbtqKGwkVvkcGG1XIW7FQojHmjw+vUERQCjoFueJ5
 NkKfus98j85/+MvSTkWx3L1K46MHMCFbtJs9RWftJ8GtoNNnm7GDxasoIG2bJKyG
 HFD3IGPuKAokE/equF3eGTRHeEM0IUGwT3EnBqdKd73zud27WsHaSqC/1CPR+74v
 ojLQ2ft1QF+pEkGrhRTdQpLyVnvEmxu8q+j9z9n/HlGEVv8kZ6LGxDPjWB+um/Yi
 Cs0XAryYrL5gE5O+Vwna61luughtIYJwR7+DeVxnQYJ43x/0MtN/SoURnwvrCTEo
 9FeoMgZm1nLh6EW29ahIT/hMu4f0sM91Kiwrmc/zEWZgoB++wo1n470qQmUUrOx4
 CPD7zdmDrf6YxDG2QTHjCtVErO4aJ5zN4Dq0+YyodV545SZVn3t4qBDTVvKhq4Y6
 NIhZAxrv5RKABwtLcP9E
 =uf0L
 -----END PGP SIGNATURE-----

Merge tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb

Pull KGDB/KDB fixes and cleanups from Jason Wessel:
 "Cleanups
   - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
   - Add module event hooks for simplified debugging with gdb
 Fixes
   - Fix kdb to stop paging with 'q' on bta and dmesg
   - Fix for data that scrolls off the vga console due to line wrapping
     when using the kdb pager
 New
   - The debug core registers for kernel module events which allows a
     kernel aware gdb to automatically load symbols and break on entry
     to a kernel module
   - Allow kgdboc=kdb to setup kdb on the vga console"

* tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  tty/console: fix warnings in drivers/tty/serial/kgdboc.c
  kdb,vt_console: Fix missed data due to pager overruns
  kdb: Fix dmesg/bta scroll to quit with 'q'
  kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell
  kgdb,x86: fix warning about unused variable
  mips,kgdb: fix recursive page fault with CONFIG_KPROBES
  kgdb: Add module event hooks
2012-10-13 11:16:58 +09:00
Jeff Layton 91a27b2a75 vfs: define struct filename and have getname() return it
getname() is intended to copy pathname strings from userspace into a
kernel buffer. The result is just a string in kernel space. It would
however be quite helpful to be able to attach some ancillary info to
the string.

For instance, we could attach some audit-related info to reduce the
amount of audit-related processing needed. When auditing is enabled,
we could also call getname() on the string more than once and not
need to recopy it from userspace.

This patchset converts the getname()/putname() interfaces to return
a struct instead of a string. For now, the struct just tracks the
string in kernel space and the original userland pointer for it.

Later, we'll add other information to the struct as it becomes
convenient.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12 20:14:55 -04:00
Jason Wessel f0a996eeed mips,kgdb: fix recursive page fault with CONFIG_KPROBES
This fault was detected using the kgdb test suite on boot and it
crashes recursively due to the fact that CONFIG_KPROBES on mips adds
an extra die notifier in the page fault handler.  The crash signature
looks like this:

kgdbts:RUN bad memory access test
KGDB: re-enter exception: ALL breakpoints killed
Call Trace:
[<807b7548>] dump_stack+0x20/0x54
[<807b7548>] dump_stack+0x20/0x54

The fix for now is to have kgdb return immediately if the fault type
is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed
to happen.

Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12 06:37:34 -05:00
Ralf Baechle 2551aebc67 MIPS: MT: Remove kspd.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:14:12 +02:00
Ralf Baechle 3efd5a0db5 MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.
Originally added in 05b541489c48e7fbeec19a92acf8683230750d0a [Merge with
Linux 2.5.5.] over 10 years ago but never been used.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:11:20 +02:00
Ralf Baechle 981ef0de49 MIPS: proc: Cleanup printing of ASEs.
The number of %s was just getting ridiculous.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:10:43 +02:00
Steven J. Hill ee80f7c73d MIPS: Add detection of DSP ASE Revision 2.
[ralf@linux-mips.org: This patch really only detects the ASE and passes its
existence on to userland via /proc/cpuinfo.  The DSP ASE Rev 2. adds new
resources but no resources that would need management by the kernel.]

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4165/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:05:03 +02:00
Al Cooper a7911a8fd1 MIPS: perf: Add perf functionality for BMIPS5000
Add hardware performance counter support to kernel "perf" code for
BMIPS5000. The BMIPS5000 performance counters are similar to MIPS
MTI cores, so the changes were mostly made in perf_event_mipsxx.c
which is typically for MTI cores.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4109/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:04:34 +02:00
Al Cooper 399aaa2568 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP
Split the Kconfig option CONFIG_MIPS_MT_SMP into CONFIG_MIPS_MT_SMP
and CONFIG_MIPS_PERF_SHARED_TC_COUNTERS so some of the code used
for performance counters that are shared between threads can be used
for MIPS cores that are not MT_SMP.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4108/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:04:34 +02:00
Al Cooper ecb8ee8a89 MIPS: perf: Remove unnecessary #ifdef
The #ifdef for CONFIG_HW_PERF_EVENTS is not needed because the
Makefile will only compile the module if this config option is set.
This means that the code under #else would never be compiled. This
may have been done to leave the original broken code around for
reference, but the FIXME comment above the code already shows the
broken code.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4107/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:04:34 +02:00
Al Cooper da4b62cd67 MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)
The PCI (Program Counter Interrupt) bit in the "cause" register
is mandatory for MIPS32R2 cores, but has also been added to some R1
cores (BMIPS5000). This change adds a cpu feature bit to make it
easier to check for and use this feature.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4106/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:04:34 +02:00
Al Cooper c5600b2dd9 MIPS: perf: Change the "mips_perf_event" table unsupported indicator.
Change the indicator from 0xffffffff in the "event_id" member to
zero in the "cntr_mask" member. This removes the need to initialize
entries that are unsupported. This also solves a problem where the
number of entries in the table was increased based on a globel enum
used for all platforms, but the new unsupported entries were not added
for mips. This was leaving new table entries of all zeros that we not
marked UNSUPPORTED.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4110/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:02:41 +02:00
David Daney 485172b3df MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.
We can save an instruction in the TLB Refill path for kernel mappings
by aligning swapper_pg_dir on a 64K boundary.  The address of
swapper_pg_dir can be generated with a single LUI instead of
LUI/{D}ADDUI.

The alignment of __init_end is bumped up to 64K so there are no holes
between it and swapper_pg_dir, which is placed at the very beginning
of .bss.

The alignment of invalid_pmd_table and invalid_pte_table can be
relaxed to PAGE_SIZE.  We do this by using __page_aligned_bss, which
has the added benefit of eliminating alignment holes in .bss.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org,
Cc: linux-kernel@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Patchwork: https://patchwork.linux-mips.org/patch/4220/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:02:40 +02:00
Linus Torvalds de390bba79 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS update from Ralf Baechle:
 "This is the MIPS update for 3.7.

  A fair chunk of them are platform updates to the Cavium Octeon SOC
  (which involves machine generated header files of considerable size),
  Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx
  platforms.

  Support for the commercial MIPS simulator MIPSsim has been removed as
  MIPS Technologies is shifting away from this product and Qemu is
  offering various more powerful platforms.  The generic MIPS code can
  now also probe for no-execute / write-only TLB features implemented
  without the full SmartMIPS extension as permitted by the latest MIPS
  processor architecture.  Lots of small changes to generic code."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits)
  MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs
  MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
  MIPS: BCM63XX: Properly handle mac address octet overflow
  MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user.
  MIPS: Replace `-' in defconfig filename wth `_' for consistency.
  MIPS: Wire kcmp syscall.
  MIPS: MIPSsim: Remove the MIPSsim platform.
  MIPS: NOTIFY_RESUME is not needed in TIF masks
  MIPS: Merge the identical "return from syscall" per-ABI code
  MIPS: Unobfuscate _TIF..._MASK
  MIPS: Prevent hitting do_notify_resume() with !user_mode(regs).
  MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'.
  MIPS: Add base architecture support for RI and XI.
  MIPS: Optimise TLB handlers for MIPS32/64 R2 cores.
  MIPS: uasm: Add INS and EXT instructions.
  MIPS: Avoid pipeline stalls on some MIPS32R2 cores.
  MIPS: Make VPE count to be one-based.
  MIPS: Add new end of interrupt functionality for GIC.
  MIPS: Add EIC support for GIC.
  MIPS: Code clean-ups for the GIC.
  ...
2012-10-09 16:08:04 +09:00
Linus Torvalds d43b7167d4 Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
 "Here are two fixes I intended to send after v3.6-rc7, but failed to do
  so.  So please pull them for v3.7-rc1 and they will be picked up by
  stable.

  The first one fixes gcc -x <language> syntax in various build-time
  tests, which icecream and possible other gcc wrappers did not
  understand (and yes, icecream is going to be fixed as well).

  The second one fixes make tar-pkg so that unpacking the tarball does
  not replace the /lib -> /usr/lib symlink on recent Fedora releases."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix gcc -x syntax
  kbuild: Do not package /boot and /lib in make tar-pkg
2012-10-08 07:56:10 +09:00
Ralf Baechle 382fc33b4a Merge branch 'master' of git://dev.phrozen.org/mips-next into mips-for-linux-next 2012-10-05 15:56:28 +02:00
Jean Delvare b1e0d8b70f kbuild: Fix gcc -x syntax
The correct syntax for gcc -x is "gcc -x assembler", not
"gcc -xassembler". Even though the latter happens to work, the former
is what is documented in the manual page and thus what gcc wrappers
such as icecream do expect.

This isn't a cosmetic change. The missing space prevents icecream from
recognizing compilation tasks it can't handle, leading to silent kernel
miscompilations.

Besides me, credits go to Michael Matz and Dirk Mueller for
investigating the miscompilation issue and tracking it down to this
incorrect -x parameter syntax.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-10-03 09:03:24 +02:00
Ralf Baechle cb418b34ca Merge branch 'ralf-3.7' of git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next 2012-09-28 16:29:55 +02:00
Ralf Baechle 77a0d763c4 Merge branch 'rixi-3.7' of git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next 2012-09-28 16:25:52 +02:00
David Howells 786d35d45c Make most arch asm/module.h files use asm-generic/module.h
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 14:31:03 +09:30
Ralf Baechle 6ede81239e MIPS: Fix module.c build for 32 bit
Fixes build failure introduced by "Make most arch asm/module.h files use
asm-generic/module.h" by moving all the RELA processing code to a
separate file to be used only for RELA processing on 64-bit kernels.

  CC      arch/mips/kernel/module.o
arch/mips/kernel/module.c:250:14: error: 'reloc_handlers_rela' defined but not
used [-Werror=unused-variable]
cc1: all warnings being treated as errors

make[6]: *** [arch/mips/kernel/module.o] Error 1

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 14:31:02 +09:30
Ralf Baechle 9b11d4370c Merge branch 'cn68xx-ciu2' of git://git.linux-mips.org/pub/scm/daney/upstream-daney into mips-for-linux-next 2012-09-27 18:00:07 +02:00
Ralf Baechle ce71d24cff MIPS: Wire kcmp syscall.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-26 11:24:28 +02:00
Linus Torvalds e5e77cf9f9 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
 "Random fixes across arch/mips, essentially.

  One fix for an issue in get_user_pages_fast() which previously was
  discovered on x86, a miscalculation in the support for the MIPS MT
  hardware multithreading support, the RTC support for the Malta and a
  fix for a spurious interrupt issue that seems to bite only very
  special Malta configurations."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Malta: Don't crash on spurious interrupt.
  MIPS: Malta: Remove RTC Data Mode bootstrap breakage
  MIPS: mm: Add compound tail page _mapcount when mapped
  MIPS: CMP/SMTC: Fix tc_id calculation
2012-09-22 12:47:53 -07:00
Al Viro 02f884ed46 MIPS: Merge the identical "return from syscall" per-ABI code
No need to keep 4 copies of that stuff; merged and taken to
entry.S, unused public symbols there killed off.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-22 15:47:31 +02:00
Al Viro f76f330809 MIPS: Prevent hitting do_notify_resume() with !user_mode(regs).
Too late to do anything there...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-22 15:47:11 +02:00
Steven J. Hill b2ab4f08e8 MIPS: Add base architecture support for RI and XI.
Originally both Read Inhibit (RI) and Execute Inhibit (XI) were
supported by the TLB only for a SmartMIPS core. The MIPSr3(TM)
Architecture now defines an optional feature to implement these
TLB bits separately. Support for one or both features can be
checked by looking at the Config3.RXI bit.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
Acked-by: David Daney <david.daney@cavium.com>
2012-09-13 16:55:53 -05:00
Steven J. Hill 3234f44669 MIPS: Make VPE count to be one-based.
When dealing with multiple VPEs, the count needs to be one-based
for correct initialization of the GIC.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
2012-09-13 15:43:51 -05:00
Steven J. Hill ec167f2d9b MIPS: Add new end of interrupt functionality for GIC.
Each platform should define its own 'gic_finish_irq' function.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
2012-09-13 15:43:50 -05:00
Steven J. Hill 98b67c37db MIPS: Add EIC support for GIC.
Add support to use an external interrupt controller with the GIC.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
2012-09-13 15:43:49 -05:00
Steven J. Hill 2299c49d60 MIPS: Code clean-ups for the GIC.
Fix whitespace, beautify the code and remove debug statements.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
2012-09-13 15:43:48 -05:00
Steven J. Hill 0b271f5600 MIPS: Make GIC code platform independent.
The GIC interrupt code is used by multiple platforms and the
current code was half Malta dependent code. These changes
abstract away the platform specific differences.

Signed-off-by: Steven J. Hill <sjhill@mips.com>
2012-09-13 15:43:47 -05:00
Steven J. Hill 006a851b10 MIPS: Add support for the 1074K core.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
2012-09-13 15:21:47 -05:00
RongQing.Li 2bd4082776 MIPS: CMP/SMTC: Fix tc_id calculation
Currently the tc_id code is:

  (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC;

After processing this becomes:

  (read_c0_tcbind() >> 21) & ((0xff) << 21)

But it should be:

  (read_c0_tcbind() & ((0xff)<< 21)) >> 21

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4077/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-27 16:10:13 +02:00
Anoop P A 1c5992427b MIPS: Fix build error for non-malta VSMP kernel
VSMP kernel build for non-malta platforms fails with following error

  LD      init/built-in.o
  LD      .tmp_vmlinux1
arch/mips/built-in.o: In function `vsmp_init_secondary':
smp-mt.c:(.cpuinit.text+0x23cc): undefined reference to `gic_present'
smp-mt.c:(.cpuinit.text+0x23d0): undefined reference to `gic_present'
make: *** [.tmp_vmlinux1] Error 1

gic_present variable is declared only if IRQ_GIC is selected.

Signed-off-by: Anoop P A <anoop.pa@gmail.com>
Patchwork: http://patchwork.linux-mips.org/patch/2039/
Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-22 23:46:38 +02:00
Florian Fainelli 91405eb69e MIPS: introduce CPU_R4K_FPU
R4K-style CPUs have this boolean defined by default. Allows us
to remove some lines in arch/mips/kernel/Makefile.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/3330/
Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-22 23:46:38 +02:00
Jayachandran C cf9bfe55f2 MIPS: Synchronize MIPS count one CPU at a time
The current implementation of synchronise_count_{master,slave} blocks
slave CPUs in early boot until all of them come up. This no longer
works because blocking a CPU with interrupts off after notifying the
CPU to be online causes problems with the current kernel.

Specifically, after the workqueue changes
(commit a08489c569 "Pull workqueue changes from Tejun Heo")
the CPU_ONLINE notification callback workqueue_cpu_up_callback()
will hang on wait_for_completion(&idle_rebind.done), if the slave
CPUs are blocked for synchronize_count_slave().

The changes are to update synchronize_count_{master,slave}() to handle
one CPU at a time and to call synchronise_count_master() in __cpu_up()
so that the CPU_ONLINE notification goes out only after the COP0 COUNT
register is synchronized.

[ralf@linux-mips.org: This matter only to those few platforms which are
using the cp0 counter as their clocksource which are XLP, XLR and MIPS'
CMP solution.]

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4216/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-17 10:57:28 +02:00
Ralf Baechle c54de490a2 MIPS: Module: Deal with malformed HI16/LO16 relocation sequences.
In case a series of R_MIPS_HI16 relocations was not followed by an
R_MIPS_LO16 relocation we were leaking the hi16 relocation chain.
Handle that error and return an error.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-17 10:57:28 +02:00
Ralf Baechle 861667dc82 MIPS: Fix race condition in module relocation code.
The relocation code was essentially taken from the 2.4 modutils which
perform relocation in userspace.  In 2.6 relocation of multiple modules
may be performed in parallel by the in-kernel loader so the global
variable mips_hi16_list won't fly anymore.  Fix race by moving it into
mod_arch_specific.

[ralf@linux-mips.org: folded in Tony's followup fix.  Thanks Tony!]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc:  linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/4189/
2012-08-17 10:57:28 +02:00
Ralf Baechle d3cac35cd0 MIPS: Fix memory leak in error path of HI16/LO16 relocation handling.
Commit 6f5d2e970452b5c86906adcb8e7ad246f535ba39 (lmo) /
477c4b0740 (kernel.org) [[MIPS: VPE: Free
relocation chain on error.] fixed the same issue in the vpe loader in 2009
but back then the same bug in module.c went unfixed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Akhilesh Kumar <akhilesh.lxr@gmail.com>
2012-08-17 10:57:27 +02:00
Ralf Baechle 95cf1468f7 MIPS: Loongson 2: Sort out clock managment.
For unexplainable reasons the Loongson 2 clock API was implemented in a
module so fixing this involved shifting large amounts of code around.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01 18:10:06 +02:00
Linus Torvalds 287dc4b764 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "More hardware support across the field including a bunch of device
  drivers.  The highlight however really are further steps towards
  device tree.

  This has been sitting in -next for ages.  All MIPS _defconfigs have
  been tested to boot or where I don't have hardware available, to at
  least build fine."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits)
  MIPS: Loongson 1B: Add defconfig
  MIPS: Loongson 1B: Add board support
  MIPS: Netlogic: early console fix
  MIPS: Netlogic: Fix indentation of smpboot.S
  MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP
  MIPS: Netlogic: Remove unused pcibios_fixups
  MIPS: Netlogic: Add XLP SoC devices in FDT
  MIPS: Netlogic: Add IRQ mappings for more devices
  MIPS: Netlogic: USB support for XLP
  MIPS: Netlogic: XLP PCIe controller support.
  MIPS: Netlogic: Platform changes for XLR/XLS I2C
  MIPS: Netlogic: Platform NAND/NOR flash support
  MIPS: Netlogic: Platform changes for XLS USB
  MIPS: Netlogic: Remove NETLOGIC_ prefix
  MIPS: Netlogic: SMP wakeup code update
  MIPS: Netlogic: Update comments in smpboot.S
  MIPS: BCM63XX: Add 96328avng reference board
  MIPS: Expose PCIe drivers for MIPS
  MIPS: BCM63XX: Add PCIe Support for BCM6328
  MIPS: BCM63XX: Move the PCI initialization into its own function
  ...
2012-07-30 11:45:52 -07:00
Josh Boyer 8ded2bbc18 posix_types.h: Cleanup stale __NFDBITS and related definitions
Recently, glibc made a change to suppress sign-conversion warnings in
FD_SET (glibc commit ceb9e56b3d1).  This uncovered an issue with the
kernel's definition of __NFDBITS if applications #include
<linux/types.h> after including <sys/select.h>.  A build failure would
be seen when passing the -Werror=sign-compare and -D_FORTIFY_SOURCE=2
flags to gcc.

It was suggested that the kernel should either match the glibc
definition of __NFDBITS or remove that entirely.  The current in-kernel
uses of __NFDBITS can be replaced with BITS_PER_LONG, and there are no
uses of the related __FDELT and __FDMASK defines.  Given that, we'll
continue the cleanup that was started with commit 8b3d1cda4f
("posix_types: Remove fd_set macros") and drop the remaining unused
macros.

Additionally, linux/time.h has similar macros defined that expand to
nothing so we'll remove those at the same time.

Reported-by: Jeff Law <law@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
CC: <stable@vger.kernel.org>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
[ .. and fix up whitespace as per akpm ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-26 13:36:43 -07:00
Ralf Baechle 68d8848567 Merge branches 'next/generic', 'next/alchemy', 'next/bcm63xx', 'next/cavium', 'next/jz4740', 'next/lantiq', 'next/loongson1b' and 'next/netlogic' into mips-for-linux-next 2012-07-25 16:37:46 +02:00
Kelvin Cheung 2fa36399e6 MIPS: Add CPU support for Loongson1B
Loongson 1B is a 32-bit SoC designed by Institute of Computing Technology
(ICT) and the Chinese Academy of Sciences (CAS), which implements the
MIPS32 release 2 instruction set.

[ralf@linux-mips.org: But which is not strictly a MIPS32 compliant device
which also is why it identifies itself with the Legacy Vendor ID in the
PrID register.  When applying the patch I shoveled some code around to
keep things in alphabetical order and avoid forward declarations.]

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: zhzhl555@gmail.com
Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/3976/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:57:04 +01:00
Steven J. Hill 889a4c7b33 MIPS: SMTC: Support for Multi-threaded FPUs
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3603/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:55:53 +01:00
David Daney b01da9f130 MIPS: Prune some target specific code out of prom.c
This code is not common enough to be in a shared file.  It is also not
used by any existing boards, so just remove it.

[ralf@linux-mips.org: Dropped removal of irq_create_of_mapping which was
already removed by abd2363f6a
[irq_domain/mips: Allow irq_domain on MIPS].  Moved device_tree_init() and
dependencies to its sole user, the XLP code.]

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: grant.likely@secretlab.ca
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2946/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:54:52 +01:00