Commit Graph

389217 Commits

Author SHA1 Message Date
Chris Wilson 63b66e5ba5 drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code
If we get an error event really early in the driver setup sequence,
which gen3 is especially prone to with various display GTT faults we
Oops. So try to avoid this.

Additionally with Haswell the transcoders are a separate bank of
registers from the pipes (4 transcoders, 3 pipes). In event of an
error, we want to be sure we have a complete and accurate picture of
the machine state, so record all the transcoders in addition to all
the active pipes.

This regression has been introduced in

commit 702e7a56af
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Tue Oct 23 18:29:59 2012 -0200

    drm/i915: convert PIPECONF to use transcoder instead of pipe

Based on the patch "drm/i915: Dump all transcoder registers on error"
from Chris Wilson:

v2: Rebase so that we don't try to be clever and try to figure out the
cpu transcoder from hw state. That exercise should be done when we
analyze the error state offline.

The actual bugfix is to not call intel_pipe_to_cpu_transcoder in the
error state capture code in case the pipes aren't fully set up yet.

v3: Simplifiy the err->num_transcoders computation a bit. While at it
make the error capture stuff save on systems without a display block.

v4: Fix fail, spotted by Jani.

v5: Completely new commit message, cc: stable.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60021
Cc: stable@vger.kernel.org
Tested-by: Dustin King <daking@rescomp.stanford.edu>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 20:26:49 +02:00
Linus Torvalds f1d6e17f54 Merge branch 'akpm' (patches from Andrew Morton)
Merge a bunch of fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  fs/proc/task_mmu.c: fix buffer overflow in add_page_map()
  arch: *: Kconfig: add "kernel/Kconfig.freezer" to "arch/*/Kconfig"
  ocfs2: fix null pointer dereference in ocfs2_dir_foreach_blk_id()
  x86 get_unmapped_area(): use proper mmap base for bottom-up direction
  ocfs2: fix NULL pointer dereference in ocfs2_duplicate_clusters_by_page
  ocfs2: Revert 40bd62e to avoid regression in extended allocation
  drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop polling a HW bit
  hugetlb: fix lockdep splat caused by pmd sharing
  aoe: adjust ref of head for compound page tails
  microblaze: fix clone syscall
  mm: save soft-dirty bits on file pages
  mm: save soft-dirty bits on swapped pages
  memcg: don't initialize kmem-cache destroying work for root caches
2013-08-14 10:04:43 -07:00
Johannes Berg dee8a9732e cfg80211: don't request disconnect if not connected
Neil Brown reports that with libertas, my recent cfg80211
SME changes in commit ceca7b7121
("cfg80211: separate internal SME implementation") broke
libertas suspend because it we now asked it to disconnect
while already disconnected.

The problematic change is in cfg80211_disconnect() as it
previously checked the SME state and now calls the driver
disconnect operation unconditionally.

Fix this by checking if there's a current_bss indicating
a connection, and do nothing if not.

Reported-and-tested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-14 14:00:19 +02:00
Dan Carpenter cb35fba360 nl80211: nl80211hdr_put() doesn't return an ERR_PTR
There are a few places which check nl80211hdr_put() for an ERR_PTR
but actually it returns NULL on error and never error values.  In
nl80211_testmode_dump() the return wasn't checked at all so I have
added one.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[some whitespace changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-14 14:00:12 +02:00
Ingo Molnar ccb1f55e71 Those are basically two fixes which correct the AMD early ucode loader
from accessing cpu_data too early, i.e. before smp_store_cpu_info()
 has copied the boot_cpu_data ontop and overwritten an already empty
 structure (which we shouldn't access that early in the first place
 anyway).
 
 The second patch is kinda largish for that late in the game but it
 shouldn't be problematic because we're simply switching from using
 cpu_data to use the CPU family number directly and thus again, not use
 uninitialized cpu_data structure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSCT0UAAoJEBLB8Bhh3lVKWNsQAJbu1y79mc2vHR15NqMGXVoP
 F6sUNC3iUnNjxlUxWn3PPynsJS9zFTBEo1S6ILnsfuMWliDoH+4psHLMmG5F20TV
 XJCSS9s3fdsaJZiNa7JXggdI80xU3y8uB/z3nacRDKgcdw3tX+ITP4SdPgNF5F3k
 B/XGAFxyXfl9M9SRFMIO4GS9UyFMsDQP0VWMRhcosY1/Fj5bc9Uds1ngP9E4XMe9
 jB1pIzbvtDvtolYSdShwFE9M0os90TYPHVSgriYYXHLZPryZC8mWkc7GwSTl4bG9
 EwBGXv79SJWics9vWM2n9EQbFt46fUAyhpjyOo/fqVp4L5XjKuV7UyeT7X+bsY0q
 b3z1jWzBxGZ5ltE2BmZ8tVnfKgwYJlKgAf8FbSrylhtBInP80Wau1aYTzw50h9D2
 lmjO/rSOhm2FszdeFHG/IeVbSZJbSFrUdwm51nx2xF1qG0MXldy9ehJ4pO3Ui2XA
 d0z2y83ZxOYV723fTCa1/5C5xAes7LjvxftM32G9QTu7R5XnvVrfehVfPh9K1DJA
 nIEH6pbM358/PT+/q7BCPTnH7KVi+mE633YERDOfAgz/NFnVKfKzLBM0+AyFNHjk
 a4xFrOqVbTctW1Chv8Nh1457A2+gcT8yeju1XjbLE8IMqKOGyMt0gnRZlgMYj8BH
 WYKWi2q0LaDwsOcaQ9bm
 =cxbY
 -----END PGP SIGNATURE-----

Merge tag 'amd_ucode_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/urgent

Pull AMD microcode fixes from Borislav Petkov:

 " Those are basically two fixes which correct the AMD early ucode loader
   from accessing cpu_data too early, i.e. before smp_store_cpu_info()
   has copied the boot_cpu_data ontop and overwritten an already empty
   structure (which we shouldn't access that early in the first place
   anyway).

   The second patch is kinda largish for that late in the game but it
   shouldn't be problematic because we're simply switching from using
   cpu_data to use the CPU family number directly and thus again, not use
   uninitialized cpu_data structure. "

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-14 12:16:28 +02:00
Andreas Schwab ea077b1b96 m68k: Truncate base in do_div()
Explicitly truncate the second operand of do_div() to 32 bits to guard
against bogus code calling it with a 64-bit divisor.

[Thorsten]

After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with:

btrfs: setting nodatacow, compression disabled
btrfs: enabling auto recovery
btrfs: disk space caching is enabled
*** ZERO DIVIDE ***   FORMAT=2
Current process id is 722
BAD KERNEL TRAP: 00000000
Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c
PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs]
SR: 2000  SP: 30c1fab4  a2: 30f0faf0
d0: 00000000    d1: 00001000    d2: 00000000    d3: 00000000
d4: 00010000    d5: 00000000    a0: 3085c72c    a1: 3085c72c
Process mount (pid: 722, task=30f0faf0)
Frame format=2 instr addr=319535ae
Stack from 30c1faec:
        00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00
        00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000
        00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000
        30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003
        00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000
        0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002
Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000

    [...]

Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68

[Geert]

As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block()
calls

    do_div(stripe_nr, stripe_len);

with stripe_len u64, while do_div() assumes the divisor is a 32-bit number.

Due to the lack of truncation in the m68k-specific implementation of
do_div(), the division is performed using the upper 32-bit word of
stripe_len, which is zero.

This was introduced by commit 53b381b3ab
("Btrfs: RAID5 and RAID6"), which changed the divisor from
map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary.

Reported-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2013-08-14 11:46:30 +02:00
Geert Uytterhoeven e8184e10f8 m68k/atari: ARAnyM - Fix NatFeat module support
As pointed out by Andreas Schwab, pointers passed to ARAnyM NatFeat calls
should be physical addresses, not virtual addresses.

Fortunately on Atari, physical and virtual kernel addresses are the same,
as long as normal kernel memory is concerned, so this usually worked fine
without conversion.

But for modules, pointers to literal strings are located in vmalloc()ed
memory. Depending on the version of ARAnyM, this causes the nf_get_id()
call to just fail, or worse, crash ARAnyM itself with e.g.

    Gotcha! Illegal memory access. Atari PC = $968c

This is a big issue for distro kernels, who want to have all drivers as
loadable modules in an initrd.

Add a wrapper for nf_get_id() that copies the literal to the stack to
work around this issue.

Reported-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
2013-08-14 11:46:30 +02:00
Nicolas Ferre a57603ca28 ARM: at91/DT: fix at91sam9n12ek memory node
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org> # 3.5+
2013-08-14 09:56:31 +02:00
Boris BREZILLON b524f38970 ARM: at91: add missing uart clocks DT entries
Add clocks to clock lookup table for uart DT entries.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-14 09:26:03 +02:00
Weiping Pan d9bf5f1309 tun: compare with 0 instead of total_len
Since we set "len = total_len" in the beginning of tun_get_user(),
so we should compare the new len with 0, instead of total_len,
or the if statement always returns false.

Signed-off-by: Weiping Pan <wpan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 19:29:08 -07:00
Asbjoern Sloth Toennesen 3e805ad288 rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header
Fix the iproute2 command `bridge vlan show`, after switching from
rtgenmsg to ifinfomsg.

Let's start with a little history:

Feb 20:   Vlad Yasevich got his VLAN-aware bridge patchset included in
          the 3.9 merge window.
          In the kernel commit 6cbdceeb, he added attribute support to
          bridge GETLINK requests sent with rtgenmsg.

Mar 6th:  Vlad got this iproute2 reference implementation of the bridge
          vlan netlink interface accepted (iproute2 9eff0e5c)

Apr 25th: iproute2 switched from using rtgenmsg to ifinfomsg (63338dca)
          http://patchwork.ozlabs.org/patch/239602/
          http://marc.info/?t=136680900700007

Apr 28th: Linus released 3.9

Apr 30th: Stephen released iproute2 3.9.0

The `bridge vlan show` command haven't been working since the switch to
ifinfomsg, or in a released version of iproute2. Since the kernel side
only supports rtgenmsg, which iproute2 switched away from just prior to
the iproute2 3.9.0 release.

I haven't been able to find any documentation, about neither rtgenmsg
nor ifinfomsg, and in which situation to use which, but kernel commit
88c5b5ce seams to suggest that ifinfomsg should be used.

Fixing this in kernel will break compatibility, but I doubt that anybody
have been using it due to this bug in the user space reference
implementation, at least not without noticing this bug. That said the
functionality is still fully functional in 3.9, when reversing iproute2
commit 63338dca.

This could also be fixed in iproute2, but thats an ugly patch that would
reintroduce rtgenmsg in iproute2, and from searching in netdev it seams
like rtgenmsg usage is discouraged. I'm assuming that the only reason
that Vlad implemented the kernel side to use rtgenmsg, was because
iproute2 was using it at the time.

Signed-off-by: Asbjoern Sloth Toennesen <ast@fiberby.net>
Reviewed-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 19:09:29 -07:00
yonghua zheng 8c8296223f fs/proc/task_mmu.c: fix buffer overflow in add_page_map()
Recently we met quite a lot of random kernel panic issues after enabling
CONFIG_PROC_PAGE_MONITOR.  After debuggind we found this has something
to do with following bug in pagemap:

In struct pagemapread:

  struct pagemapread {
      int pos, len;
      pagemap_entry_t *buffer;
      bool v2;
  };

pos is number of PM_ENTRY_BYTES in buffer, but len is the size of
buffer, it is a mistake to compare pos and len in add_page_map() for
checking buffer is full or not, and this can lead to buffer overflow and
random kernel panic issue.

Correct len to be total number of PM_ENTRY_BYTES in buffer.

[akpm@linux-foundation.org: document pagemapread.pos and .len units, fix PM_ENTRY_BYTES definition]
Signed-off-by: Yonghua Zheng <younghua.zheng@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:50 -07:00
Chen Gang 57a1a19763 arch: *: Kconfig: add "kernel/Kconfig.freezer" to "arch/*/Kconfig"
All architectures include "kernel/Kconfig.freezer" except three left, so
let them include it too, or 'allmodconfig' will report error.

The related errors: (with allmodconfig for openrisc):

    CC      kernel/cgroup_freezer.o
  kernel/cgroup_freezer.c: In function 'freezer_css_online':
  kernel/cgroup_freezer.c:133:15: error: 'system_freezing_cnt' undeclared (first use in this function)
  kernel/cgroup_freezer.c:133:15: note: each undeclared identifier is reported only once for each function it appears in
  kernel/cgroup_freezer.c: In function 'freezer_css_offline':
  kernel/cgroup_freezer.c:157:15: error: 'system_freezing_cnt' undeclared (first use in this function)
  kernel/cgroup_freezer.c: In function 'freezer_attach':
  kernel/cgroup_freezer.c:200:4: error: implicit declaration of function 'freeze_task'
  kernel/cgroup_freezer.c: In function 'freezer_apply_state':
  kernel/cgroup_freezer.c:371:16: error: 'system_freezing_cnt' undeclared (first use in this function)

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:49 -07:00
Jeff Liu d6394b5900 ocfs2: fix null pointer dereference in ocfs2_dir_foreach_blk_id()
Fix a NULL pointer deference while removing an empty directory, which
was introduced by commit 3704412bdb ("[readdir] convert ocfs2").

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: [<(null)>]           (null)
  PGD 6da85067 PUD 6da89067 PMD 0
  Oops: 0010 [#1] SMP
  CPU: 0 PID: 6564 Comm: rmdir Tainted: G           O 3.11.0-rc1 #4
  RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
  Call Trace:
    ocfs2_dir_foreach+0x49/0x50 [ocfs2]
    ocfs2_empty_dir+0x12c/0x3e0 [ocfs2]
    ocfs2_unlink+0x56e/0xc10 [ocfs2]
    vfs_rmdir+0xd5/0x140
    do_rmdir+0x1cb/0x1e0
    SyS_rmdir+0x16/0x20
    system_call_fastpath+0x16/0x1b
  Code:  Bad RIP value.
  RIP  [<          (null)>]           (null)
  RSP <ffff88006daddc10>
  CR2: 0000000000000000

[dan.carpenter@oracle.com: fix pointer math]
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reported-by: David Weber <wb@munzinger.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:49 -07:00
Radu Caragea df54d6fa54 x86 get_unmapped_area(): use proper mmap base for bottom-up direction
When the stack is set to unlimited, the bottomup direction is used for
mmap-ings but the mmap_base is not used and thus effectively renders
ASLR for mmapings along with PIE useless.

Cc: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Sendroiu <molecula2788@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:49 -07:00
Tiger Yang c7dd3392ad ocfs2: fix NULL pointer dereference in ocfs2_duplicate_clusters_by_page
Since ocfs2_cow_file_pos will invoke ocfs2_refcount_icow with a NULL as
the struct file pointer, it finally result in a null pointer dereference
in ocfs2_duplicate_clusters_by_page.

This patch replace file pointer with inode pointer in
cow_duplicate_clusters to fix this issue.

[jeff.liu@oracle.com: rebased patch against linux-next tree]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Tao Ma <tm@tao.ma>
Tested-by: David Weber <wb@munzinger.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:49 -07:00
Jie Liu 6115ea2884 ocfs2: Revert 40bd62e to avoid regression in extended allocation
Revert commit 40bd62eb7f ("fs/ocfs2/journal.h: add bits_wanted while
calculating credits in ocfs2_calc_extend_credits").

Unfortunately this change broke fallocate even if there is insufficient
disk space for the preallocation, which is a serious problem.

  # df -h
  /dev/sda8        22G  1.2G   21G   6% /ocfs2
  # fallocate -o 0 -l 200M /ocfs2/testfile
  fallocate: /ocfs2/test: fallocate failed: No space left on device

and a kernel warning:

  CPU: 3 PID: 3656 Comm: fallocate Tainted: G        W  O 3.11.0-rc3 #2
  Call Trace:
    dump_stack+0x77/0x9e
    warn_slowpath_common+0xc4/0x110
    warn_slowpath_null+0x2a/0x40
    start_this_handle+0x6c/0x640 [jbd2]
    jbd2__journal_start+0x138/0x300 [jbd2]
    jbd2_journal_start+0x23/0x30 [jbd2]
    ocfs2_start_trans+0x166/0x300 [ocfs2]
    __ocfs2_extend_allocation+0x38f/0xdb0 [ocfs2]
    ocfs2_allocate_unwritten_extents+0x3c9/0x520
    __ocfs2_change_file_space+0x5e0/0xa60 [ocfs2]
    ocfs2_fallocate+0xb1/0xe0 [ocfs2]
    do_fallocate+0x1cb/0x220
    SyS_fallocate+0x6f/0xb0
    system_call_fastpath+0x16/0x1b
  JBD2: fallocate wants too many credits (51216 > 4381)

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:49 -07:00
Lothar Waßmann 28a0c88312 drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop polling a HW bit
It's always a bad idea to poll on HW bits without a timeout.

The i.MX28 RTC can be easily brought into a state in which the RTC is
not running (until after a power-on-reset) and thus the status bits
which are polled in the driver won't ever change.

This patch prevents the kernel from getting stuck in this case.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Michal Hocko b610ded719 hugetlb: fix lockdep splat caused by pmd sharing
Dave has reported the following lockdep splat:

  =================================
  [ INFO: inconsistent lock state ]
  3.11.0-rc1+ #9 Not tainted
  ---------------------------------
  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
  kswapd0/49 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&mapping->i_mmap_mutex){+.+.?.}, at: [<c114971b>] page_referenced+0x87/0x5e3
  {RECLAIM_FS-ON-W} state was registered at:
     mark_held_locks+0x81/0xe7
     lockdep_trace_alloc+0x5e/0xbc
     __alloc_pages_nodemask+0x8b/0x9b6
     __get_free_pages+0x20/0x31
     get_zeroed_page+0x12/0x14
     __pmd_alloc+0x1c/0x6b
     huge_pmd_share+0x265/0x283
     huge_pte_alloc+0x5d/0x71
     hugetlb_fault+0x7c/0x64a
     handle_mm_fault+0x255/0x299
     __do_page_fault+0x142/0x55c
     do_page_fault+0xd/0x16
     error_code+0x6c/0x74
  irq event stamp: 3136917
  hardirqs last  enabled at (3136917):  _raw_spin_unlock_irq+0x27/0x50
  hardirqs last disabled at (3136916):  _raw_spin_lock_irq+0x15/0x78
  softirqs last  enabled at (3136180):  __do_softirq+0x137/0x30f
  softirqs last disabled at (3136175):  irq_exit+0xa8/0xaa
  other info that might help us debug this:
   Possible unsafe locking scenario:
         CPU0
         ----
    lock(&mapping->i_mmap_mutex);
    <Interrupt>
      lock(&mapping->i_mmap_mutex);

  *** DEADLOCK ***
  no locks held by kswapd0/49.

  stack backtrace:
  CPU: 1 PID: 49 Comm: kswapd0 Not tainted 3.11.0-rc1+ #9
  Hardware name: Dell Inc.                 Precision WorkStation 490    /0DT031, BIOS A08 04/25/2008
  Call Trace:
    dump_stack+0x4b/0x79
    print_usage_bug+0x1d9/0x1e3
    mark_lock+0x1e0/0x261
    __lock_acquire+0x623/0x17f2
    lock_acquire+0x7d/0x195
    mutex_lock_nested+0x6c/0x3a7
    page_referenced+0x87/0x5e3
    shrink_page_list+0x3d9/0x947
    shrink_inactive_list+0x155/0x4cb
    shrink_lruvec+0x300/0x5ce
    shrink_zone+0x53/0x14e
    kswapd+0x517/0xa75
    kthread+0xa8/0xaa
    ret_from_kernel_thread+0x1b/0x28

which is a false positive caused by hugetlb pmd sharing code which
allocates a new pmd from withing mapping->i_mmap_mutex.  If this
allocation causes reclaim then the lockdep detector complains that we
might self-deadlock.

This is not correct though, because hugetlb pages are not reclaimable so
their mapping will be never touched from the reclaim path.

The patch tells lockup detector that hugetlb i_mmap_mutex is special by
assigning it a separate lockdep class so it won't report possible
deadlocks on unrelated mappings.

[peterz@infradead.org: comment for annotation]
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Ed Cashin fb32975d1b aoe: adjust ref of head for compound page tails
Fix a BUG which can trigger when direct-IO is used with AOE.

As discussed previously, the fact that some users of the block layer
provide bios that point to pages with a zero _count means that it is not
OK for the network layer to do a put_page on the skb frags during an
skb_linearize, so the aoe driver gets a reference to pages in bios and
puts the reference before ending the bio.  And because it cannot use
get_page on a page with a zero _count, it manipulates the value
directly.

It is not OK to increment the _count of a compound page tail, though,
since the VM layer will VM_BUG_ON a non-zero _count.  Block users that
do direct I/O can result in the aoe driver seeing compound page tails in
bios.  In that case, the same logic works as long as the head of the
compound page is used instead of the tails.  This patch handles compound
pages and does not BUG.

It relies on the block layer user leaving the relationship between the
page tail and its head alone for the duration between the submission of
the bio and its completion, whether successful or not.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Michal Simek dfa9771a7c microblaze: fix clone syscall
Fix inadvertent breakage in the clone syscall ABI for Microblaze that
was introduced in commit f3268edbe6 ("microblaze: switch to generic
fork/vfork/clone").

The Microblaze syscall ABI for clone takes the parent tid address in the
4th argument; the third argument slot is used for the stack size.  The
incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd
slot.

This commit restores the original ABI so that existing userspace libc
code will work correctly.

All kernel versions from v3.8-rc1 were affected.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Cyrill Gorcunov 41bb3476b3 mm: save soft-dirty bits on file pages
Andy reported that if file page get reclaimed we lose the soft-dirty bit
if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get
encoded into pte entry.  Thus when #pf happens on such non-present pte
we can restore it back.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Cyrill Gorcunov 179ef71cbc mm: save soft-dirty bits on swapped pages
Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set
get swapped out, the bit is getting lost and no longer available when
pte read back.

To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in
pte entry for the page being swapped out.  When such page is to be read
back from a swap cache we check for bit presence and if it's there we
clear it and restore the former _PAGE_SOFT_DIRTY bit back.

One of the problem was to find a place in pte entry where we can save
the _PTE_SWP_SOFT_DIRTY bit while page is in swap.  The _PAGE_PSE was
chosen for that, it doesn't intersect with swap entry format stored in
pte.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:47 -07:00
Andrey Vagin 3e6b11df24 memcg: don't initialize kmem-cache destroying work for root caches
struct memcg_cache_params has a union.  Different parts of this union
are used for root and non-root caches.  A part with destroying work is
used only for non-root caches.

I fixed the same problem in another place v3.9-rc1-16204-gf101a94, but
didn't notice this one.

This patch fixes the kernel panic:

[   46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8
[   46.849026] IP: [<ffffffff811a484c>] kmem_cache_destroy_memcg_children+0x6c/0xc0
[   46.849092] PGD 0
[   46.849092] Oops: 0000 [#1] SMP
...

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: <stable@vger.kernel.org>    [3.9.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:47 -07:00
Alexey Brodkin 9cff866e37 ethernet/arc/arc_emac - fix NAPI "work > weight" warning
Initially I improperly set a boundary for maximum number of input
packets to process on NAPI poll ("work") so it might be more than
expected amount ("weight").

This was really harmless but seeing WARN_ON_ONCE on every device boot is
not nice. So trivial fix ("<" instead of "<=") is here.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 17:00:45 -07:00
Linus Torvalds 28fbc8b6a2 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
 "Docbook fixes that make 99% of the diffstat, plus a oneliner fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Ensure update_cfs_shares() is called for parents of continuously-running tasks
  sched: Fix some kernel-doc warnings
2013-08-13 16:58:17 -07:00
Linus Torvalds bfd3605087 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Two small fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Add Haswell ULT model number used in Macbook Air and other systems
  perf/x86: Fix intel QPI uncore event definitions
2013-08-13 16:57:40 -07:00
Stephen Boyd b88a2595b6 perf/arm: Fix armpmu_map_hw_event()
Fix constraint check in armpmu_map_hw_event().

Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 16:57:24 -07:00
Pravin B Shelar 4221f40513 ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.
Using inner-id for tunnel id is not safe in some rare cases.
E.g. packets coming from multiple sources entering same tunnel
can have same id. Therefore on tunnel packet receive we
could have packets from two different stream but with same
source and dst IP with same ip-id which could confuse ip packet
reassembly.

Following patch reverts optimization from commit
490ab08127 (IP_GRE: Fix IP-Identification.)

CC: Jarno Rajahalme <jrajahalme@nicira.com>
CC: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:52:50 -07:00
David S. Miller 50f850fdf9 Merge branch 'bnx2x'
Dmitry Kravkov says:

====================
Please consider applying the series of bnx2x fixes to net:
	* statistics may cause FW assert
	* missing fairness configuration in DCB flow
	* memory leak in sriov related part
	* Illegal PTE access
	* Pagefault crash in shutdown flow with cnic
v1->v2
	* fixed sparse error pointed by Joe Perches
	* added missing signed-off from Sergei Shtylyov
v2->v3
	* added missing signed-off from Sergei Shtylyov
	* fixed formatting from Sergei Shtylyov
v3->v4
	* patch 1/6: fixed declaration order
	* patch 2/6 replaced with: protect flows using set_bit constraints
v4->v5
	* patch 2/6: replace proprietary locking with semaphore
	* droped 1/6: since adds redundant code from Benjamin Poirier
The following patchset contains four netfilter fixes, they are:

* Fix possible invalid access and mangling of the TCPMSS option in
  xt_TCPMSS. This was spotted by Julian Anastasov.

* Fix possible off by one access and mangling of the TCP packet in
  xt_TCPOPTSTRIP, also spotted by Julian Anastasov.

* Fix possible information leak due to missing initialization of one
  padding field of several structures that are included in nfqueue and
  nflog netlink messages, from Dan Carpenter.

* Fix TCP window tracking with Fast Open, from Yuchung Cheng.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:38 -07:00
Yuval Mintz 6ef5a92cdf bnx2x: prevent crash in shutdown flow with CNIC
There might be a crash as during shutdown flow CNIC might try
to access resources already freed by bnx2x.
Change bnx2x_close() into dev_close() in __bnx2x_remove (shutdown flow)
to guarantee CNIC is notified of the device's change of status.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Barak Witkowsky a6d3a5ba3e bnx2x: fix PTE write access error
PTE write access error  might occur in MF_ALLOWED mode when IOMMU
is active. The patch adds rmmod HSI indicating to MFW to stop
running queries which might trigger this failure.

Signed-off-by: Barak Witkowsky <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Ariel Elior 8ece516518 bnx2x: fix memory leak in VF
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Dmitry Kravkov 568e24260f bnx2x: update fairness parameters following DCB negotiation
ETS can be enabled as a result of DCB negotiation, then
fairness must be recalculated after each negotiation.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Dmitry Kravkov 507393eb29 bnx2x: protect different statistics flows
Add locking to protect different statistics flows from
running simultaneously.
This in order to serialize statistics requests sent to FW,
otherwise two outstanding queries may cause FW assert.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Stephen Boyd 40fea92ffb PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout()
pm_qos_update_request_timeout() updates a qos and then schedules
a delayed work item to bring the qos back down to the default
after the timeout. When the work item runs, pm_qos_work_fn() will
call pm_qos_update_request() and deadlock because it tries to
cancel itself via cancel_delayed_work_sync(). Future callers of
that qos will also hang waiting to cancel the work that is
canceling itself. Let's extract the little bit of code that does
the real work of pm_qos_update_request() and call it from the
work function so that we don't deadlock.

Before ed1ac6e (PM: don't use [delayed_]work_pending()) this didn't
happen because the work function wouldn't try to cancel itself.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 00:42:05 +02:00
Hyong-Youb Kim 205057aeb3 myri10ge: Update MAINTAINERS
Remove Andrew Gallatin, as he is no longer with Myricom. Add
Hyong-Youb Kim as the new maintainer. Update the website URL.

Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:25:25 -07:00
stephen hemminger e47851f13d skge: dma_sync the whole receive buffer
The DMA sync should sync the whole receive buffer, not just
part of it. Fixes log messages dma_sync_check.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:09:06 -07:00
Russell King 2a2822475d Merge branch 'security-fixes' into fixes 2013-08-13 20:23:28 +01:00
Stephen Warren 2103f6cba6 ARM: 7807/1: kexec: validate CPU hotplug support
Architectures should fully validate whether kexec is possible as part of
machine_kexec_prepare(), so that user-space's kexec_load() operation can
report any problems. Performing validation in machine_kexec() itself is
too late, since it is not allowed to return.

Prior to this patch, ARM's machine_kexec() was testing after-the-fact
whether machine_kexec_prepare() was able to disable all but one CPU.
Instead, modify machine_kexec_prepare() to validate all conditions
necessary for machine_kexec_prepare()'s to succeed. BUG if the validation
succeeded, yet disabling the CPUs didn't actually work.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13 20:23:18 +01:00
Will Deacon 00efaa0250 ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock
Commit 15e7e5c1eb ("ARM: 7749/1: spinlock: retry trylock operation if
strex fails on free lock") modifying our arch_spin_trylock to retry the
acquisition if the lock appeared uncontended, but the strex failed.

This patch does the same for rwlocks, which were missed by the original
patch.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13 20:22:44 +01:00
Will Deacon afa31d8eb8 ARM: 7811/1: locks: use early clobber in arch_spin_trylock
The res variable is written before we've finished with the input
operands (namely the lock address), so ensure that we mark it as `early
clobber' to avoid unintended register sharing.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13 20:22:43 +01:00
Stephen Boyd d9f966357b ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()
Vince Weaver reports an oops in the ARM perf event code while
running his perf_fuzzer tool on a pandaboard running v3.11-rc4.

Unable to handle kernel paging request at virtual address 73fd14cc
pgd = eca6c000
[73fd14cc] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: snd_soc_omap_hdmi omapdss snd_soc_omap_abe_twl6040 snd_soc_twl6040 snd_soc_omap snd_soc_omap_hdmi_card snd_soc_omap_mcpdm snd_soc_omap_mcbsp snd_soc_core snd_compress regmap_spi snd_pcm snd_page_alloc snd_timer snd soundcore
CPU: 1 PID: 2790 Comm: perf_fuzzer Not tainted 3.11.0-rc4 #6
task: eddcab80 ti: ed892000 task.ti: ed892000
PC is at armpmu_map_event+0x20/0x88
LR is at armpmu_event_init+0x38/0x280
pc : [<c001c3e4>]    lr : [<c001c17c>]    psr: 60000013
sp : ed893e40  ip : ecececec  fp : edfaec00
r10: 00000000  r9 : 00000000  r8 : ed8c3ac0
r7 : ed8c3b5c  r6 : edfaec00  r5 : 00000000  r4 : 00000000
r3 : 000000ff  r2 : c0496144  r1 : c049611c  r0 : edfaec00
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: aca6c04a  DAC: 00000015
Process perf_fuzzer (pid: 2790, stack limit = 0xed892240)
Stack: (0xed893e40 to 0xed894000)
3e40: 00000800 c001c17c 00000002 c008a748 00000001 00000000 00000000 c00bf078
3e60: 00000000 edfaee50 00000000 00000000 00000000 edfaec00 ed8c3ac0 edfaec00
3e80: 00000000 c073ffac ed893f20 c00bf180 00000001 00000000 c00bf078 ed893f20
3ea0: 00000000 ed8c3ac0 00000000 00000000 00000000 c0cb0818 eddcab80 c00bf440
3ec0: ed893f20 00000000 eddcab80 eca76800 00000000 eca76800 00000000 00000000
3ee0: 00000000 ec984c80 eddcab80 c00bfe68 00000000 00000000 00000000 00000080
3f00: 00000000 ed892000 00000000 ed892030 00000004 ecc7e3c8 ecc7e3c8 00000000
3f20: 00000000 00000048 ecececec 00000000 00000000 00000000 00000000 00000000
3f40: 00000000 00000000 00297810 00000000 00000000 00000000 00000000 00000000
3f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3f80: 00000002 00000002 000103a4 00000002 0000016c c00128e8 ed892000 00000000
3fa0: 00090998 c0012700 00000002 000103a4 00090ab8 00000000 00000000 0000000f
3fc0: 00000002 000103a4 00000002 0000016c 00090ab0 00090ab8 000107a0 00090998
3fe0: bed92be0 bed92bd0 0000b785 b6e8f6d0 40000010 00090ab8 00000000 00000000
[<c001c3e4>] (armpmu_map_event+0x20/0x88) from [<c001c17c>] (armpmu_event_init+0x38/0x280)
[<c001c17c>] (armpmu_event_init+0x38/0x280) from [<c00bf180>] (perf_init_event+0x108/0x180)
[<c00bf180>] (perf_init_event+0x108/0x180) from [<c00bf440>] (perf_event_alloc+0x248/0x40c)
[<c00bf440>] (perf_event_alloc+0x248/0x40c) from [<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc)
[<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc) from [<c0012700>] (ret_fast_syscall+0x0/0x48)
Code: 0a000005 e3540004 0a000016 e3540000 (0791010c)

This is because event->attr.config in armpmu_event_init()
contains a very large number copied directly from userspace and
is never checked against the size of the array indexed in
armpmu_map_hw_event(). Fix the problem by checking the value of
config before indexing the array and rejecting invalid config
values.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13 20:21:44 +01:00
Will Deacon c95eb3184e ARM: 7809/1: perf: fix event validation for software group leaders
It is possible to construct an event group with a software event as a
group leader and then subsequently add a hardware event to the group.
This results in the event group being validated by adding all members
of the group to a fake PMU and attempting to allocate each event on
their respective PMU.

Unfortunately, for software events wthout a corresponding arm_pmu, this
results in a kernel crash attempting to dereference the ->get_event_idx
function pointer.

This patch fixes the problem by checking explicitly for software events
and ignoring those in event validation (since they can always be
scheduled). We will probably want to revisit this for 3.12, since the
validation checks don't appear to work correctly when dealing with
multiple hardware PMUs anyway.

Cc: <stable@vger.kernel.org>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13 20:21:43 +01:00
Sylwester Nawrocki a701fe3851 clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks
The ISP clock registers belong to the ISP power domain and may change
their values if this power domain is switched off/on. Add
CLK_GET_RATE_NOCACHE flags to ensure we do not rely on invalid cached
data when setting or getting frequency of those clocks.

Without this fix the FIMC-IS Cortex-A5 core and AXI bus clocks have
incorrect frequencies, which breaks the ISP operation and starting the
video pipeline fails with timeouts reported by the FIMC-IS firmware.

See related commit 722a860ecb "[media]
exynos4-is: Fix FIMC-IS clocks initialization" for more details.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-13 10:01:56 -07:00
Soren Brinkmann 765b7d4c4c clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
Zynq's Ethernet clocks are created by the following hierarchy:
	mux0 ---> div0 ---> div1 ---> mux1 ---> gate
Rate change requests on the gate have to propagate all the way up to
div0 to properly leverage all dividers. Mux1 was missing the
CLK_SET_RATE_PARENT flag, which is required to achieve this.

This does not fix a specific regression but the clock driver was merged
for 3.11-rc1, so best to fix the known bugs before the release.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: added to changelog]
2013-08-13 10:01:55 -07:00
Soren Brinkmann 252957cc3a clk/zynq/clkc: Add dedicated spinlock for the SWDT
The clk_mux for the system watchdog timer reused the register lock
dedicated to the Ethernet module - for no apparent reason.
Add a lock dedicated to the SWDT's clock register to remove this
wrong dependency.

This does not fix a specific regression but the clock driver was merged
for 3.11-rc1, so best to fix the known bugs before the release.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: added to changelog]
2013-08-13 10:01:55 -07:00
Oleg Nesterov e0acd0a68e sched: fix the theoretical signal_wake_up() vs schedule() race
This is only theoretical, but after try_to_wake_up(p) was changed
to check p->state under p->pi_lock the code like

	__set_current_state(TASK_INTERRUPTIBLE);
	schedule();

can miss a signal. This is the special case of wait-for-condition,
it relies on try_to_wake_up/schedule interaction and thus it does
not need mb() between __set_current_state() and if(signal_pending).

However, this __set_current_state() can move into the critical
section protected by rq->lock, now that try_to_wake_up() takes
another lock we need to ensure that it can't be reordered with
"if (signal_pending(current))" check inside that section.

The patch is actually one-liner, it simply adds smp_wmb() before
spin_lock_irq(rq->lock). This is what try_to_wake_up() already
does by the same reason.

We turn this wmb() into the new helper, smp_mb__before_spinlock(),
for better documentation and to allow the architectures to change
the default implementation.

While at it, kill smp_mb__after_lock(), it has no callers.

Perhaps we can also add smp_mb__before/after_spinunlock() for
prepare_to_wait().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 08:19:26 -07:00
Li Zefan a903f0865a cpuset: fix the return value of cpuset_write_u64()
Writing to this file always returns -ENODEV:

  # echo 1 > cpuset.memory_pressure_enabled
  -bash: echo: write error: No such device

Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-08-13 10:54:40 -04:00
Johannes Berg 58ad436fcf genetlink: fix family dump race
When dumping generic netlink families, only the first dump call
is locked with genl_lock(), which protects the list of families,
and thus subsequent calls can access the data without locking,
racing against family addition/removal. This can cause a crash.
Fix it - the locking needs to be conditional because the first
time around it's already locked.

A similar bug was reported to me on an old kernel (3.4.47) but
the exact scenario that happened there is no longer possible,
on those kernels the first round wasn't locked either. Looking
at the current code I found the race described above, which had
also existed on the old kernel.

Cc: stable@vger.kernel.org
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 00:57:06 -07:00