There is a potential use after free issue with the handling of
MSR_KVM_SYSTEM_TIME. If the guest specifies a GPA in a movable or removable
memory such as frame buffers then KVM might continue to write to that
address even after it's removed via KVM_SET_USER_MEMORY_REGION. KVM pins
the page in memory so it's unlikely to cause an issue, but if the user
space component re-purposes the memory previously used for the guest, then
the guest will be able to corrupt that memory.
Tested: Tested against kvmclock unit test
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the guest sets the GPA of the time_page so that the request to update the
time straddles a page then KVM will write onto an incorrect page. The
write is done byusing kmap atomic to get a pointer to the page for the time
structure and then performing a memcpy to that page starting at an offset
that the guest controls. Well behaved guests always provide a 32-byte aligned
address, however a malicious guest could use this to corrupt host kernel
memory.
Tested: Tested against kvmclock unit test.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is a deadlock in pvclock handling:
cpu0: cpu1:
kvm_gen_update_masterclock()
kvm_guest_time_update()
spin_lock(pvclock_gtod_sync_lock)
local_irq_save(flags)
spin_lock(pvclock_gtod_sync_lock)
kvm_make_mclock_inprogress_request(kvm)
make_all_cpus_request()
smp_call_function_many()
Now if smp_call_function_many() called by cpu0 tries to call function on
cpu1 there will be a deadlock.
Fix by moving pvclock_gtod_sync_lock protected section outside irq
disabled section.
Analyzed by Gleb Natapov <gleb@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Reported-and-Tested-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "x86, AMD: Enable WC+ memory type on family 10 processors" patch
currently in -tip added a workaround for AMD F10h CPUs which #GPs my
guest when booted in kvm. This is because it accesses MSR_AMD64_BU_CFG2
which is not currently ignored by kvm. Do that because this MSR is only
baremetal-relevant anyway. While at it, move the ignored MSRs at the
beginning of kvm_set_msr_common so that we exit then and there.
Acked-by: Gleb Natapov <gleb@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Andre Przywara <andre@andrep.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1361298793-31834-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This field was needed to differentiate memory slots created by the new
API, KVM_SET_USER_MEMORY_REGION, from those by the old equivalent,
KVM_SET_MEMORY_REGION, whose support was dropped long before:
commit b74a07beed
KVM: Remove kernel-allocated memory regions
Although we also have private memory slots to which KVM allocates
memory with vm_mmap(), !user_alloc slots in other words, the slot id
should be enough for differentiating them.
Note: corresponding function parameters will be removed later.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Without Posted Interrupt, current code is broken. Just disable by
default until Posted Interrupt is ready.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Use link_shadow_page to link the sp to the spte in __direct_map
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It is only used in debug code, so drop it
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, kvm zaps the large spte if write-protected is needed, the later
read can fault on that spte. Actually, we can make the large spte readonly
instead of making them not present, the page fault caused by read access can
be avoided
The idea is from Avi:
| As I mentioned before, write-protecting a large spte is a good idea,
| since it moves some work from protect-time to fault-time, so it reduces
| jitter. This removes the need for the return value.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When calculating hw_cr0 teh current code masks bits that should be always
on and re-adds them back immediately after. Cleanup the code by masking
only those bits that should be dropped from hw_cr0. This allow us to
get rid of some defines.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
SMEP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMEP needs to be manually
disabled when guest switches to non-paging mode.
We met an issue that, SMP Linux guest with recent kernel (enable
SMEP support, for example, 3.5.3) would crash with triple fault if
setting unrestricted_guest=0. This is because KVM uses an identity
mapping page table to emulate the non-paging mode, where the page
table is set with USER flag. If SMEP is still enabled in this case,
guest will meet unhandlable page fault and then crash.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This reverts commit bd4c86eaa6.
There is not user for kvm_mmu_isolate_page() any more.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Gust page walker puts only present ptes into ptes[] array. No need to
check it again.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move base_role.nxe initialisation to where all other roles are initialized.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
spte_is_locklessly_modifiable() checks that both SPTE_HOST_WRITEABLE and
SPTE_MMU_WRITEABLE are present on spte. Make it more explicit.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Virtual interrupt delivery avoids KVM to inject vAPIC interrupts
manually, which is fully taken care of by the hardware. This needs
some special awareness into existing interrupr injection path:
- for pending interrupt, instead of direct injection, we may need
update architecture specific indicators before resuming to guest.
- A pending interrupt, which is masked by ISR, should be also
considered in above update action, since hardware will decide
when to inject it at right time. Current has_interrupt and
get_interrupt only returns a valid vector from injection p.o.v.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
basically to benefit from apicv, we need to enable virtualized x2apic mode.
Currently, we only enable it when guest is really using x2apic.
Also, clear MSR bitmap for corresponding x2apic MSRs when guest enabled x2apic:
0x800 - 0x8ff: no read intercept for apicv register virtualization,
except APIC ID and TMCCT which need software's assistance to
get right value.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
'pushq' doesn't exist on i386. Replace with 'push', which should work
since the operand is a register.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
If emulate_invalid_guest_state=false vmx->emulation_required is never
actually used, but it ends up to be always set to true since
handle_invalid_guest_state(), the only place it is reset back to
false, is never called. This, besides been not very clean, makes vmexit
and vmentry path to check emulate_invalid_guest_state needlessly.
The patch fixes that by keeping emulation_required coherent with
emulate_invalid_guest_state setting.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If VMX reports segment as unusable, zero descriptor passed by the emulator
before returning. Such descriptor will be considered not present by the
emulator.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Usability is returned in unusable field, so not need to clobber entire
AR. Callers have to know how to deal with unusable segments already
since if emulate_invalid_guest_state=true AR is not zeroed.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
vmx->rmode.vm86_active is never true is unrestricted guest is enabled.
Make it more explicit that neither enter_pmode() nor enter_rmode() is
called in this case.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is no reason for it. If state is suitable for vmentry it
will be detected during guest entry and no emulation will happen.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Since vmx_get_cpl() always returns 0 when VCPU is in real mode it is no
longer needed. Also reset CPL cache to zero during transaction to
protected mode since transaction may happen while CS.selectors & 3 != 0,
but in reality CPL is 0.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make fastop opcodes usable in other emulations.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This is a bit of a special case since we don't have the usual
byte/word/long/quad switch; instead we switch on the condition code embedded
in the instruction.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The current reexecute_instruction can not well detect the failed instruction
emulation. It allows guest to retry all the instructions except it accesses
on error pfn
For example, some cases are nested-write-protect - if the page we want to
write is used as PDE but it chains to itself. Under this case, we should
stop the emulation and report the case to userspace
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, reexecute_instruction refused to retry all instructions if
tdp is enabled. If nested npt is used, the emulation may be caused by
shadow page, it can be fixed by dropping the shadow page. And the only
condition that tdp can not retry the instruction is the access fault
on error pfn
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Little cleanup for reexecute_instruction, also use gpa_to_gfn in
retry_instruction
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the userspace starts dirty logging for a large slot, say 64GB of
memory, kvm_mmu_slot_remove_write_access() needs to hold mmu_lock for
a long time such as tens of milliseconds. This patch controls the lock
hold time by asking the scheduler if we need to reschedule for others.
One penalty for this is that we need to flush TLBs before releasing
mmu_lock. But since holding mmu_lock for a long time does affect not
only the guest, vCPU threads in other words, but also the host as a
whole, we should pay for that.
In practice, the cost will not be so high because we can protect a fair
amount of memory before being rescheduled: on my test environment,
cond_resched_lock() was called only once for protecting 12GB of memory
even without THP. We can also revisit Avi's "unlocked TLB flush" work
later for completely suppressing extra TLB flushes if needed.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Better to place mmu_lock handling and TLB flushing code together since
this is a self-contained function.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
No reason to make callers take mmu_lock since we do not need to protect
kvm_mmu_change_mmu_pages() and kvm_mmu_slot_remove_write_access()
together by mmu_lock in kvm_arch_commit_memory_region(): the former
calls kvm_mmu_commit_zap_page() and flushes TLBs by itself.
Note: we do not need to protect kvm->arch.n_requested_mmu_pages by
mmu_lock as can be seen from the fact that it is read locklessly.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Andy Honig
Marcelo Tosatti
Sasha Levin
Linus Torvalds
Borislav Petkov
Jan Kiszka
Gleb Natapov
Takuya Yoshikawa
Yang Zhang
Xiao Guangrong
Dongxiao Xu
Avi Kivity