Commit Graph

655 Commits

Author SHA1 Message Date
Barry Song 6f8d7022a8 PM / Hibernate: Add resumewait param to support MMC-like devices as resume file
Some devices like MMC are async detected very slow. For example,
drivers/mmc/host/sdhci.c launches a 200ms delayed work to detect
MMC partitions then add disk.

We have wait_for_device_probe() and scsi_complete_async_scans()
before calling swsusp_check(), but it is not enough to wait for MMC.

This patch adds resumewait kernel param just like rootwait so
that we have enough time to wait until MMC is ready. The difference is
that we wait for resume partition whereas rootwait waits for rootfs
partition (which may be on a different device).

This patch will make hibernation support many embedded products
without SCSI devices, but with devices like MMC.

[rjw: Modified the changelog slightly.]

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Reviewed-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:30:36 +02:00
Barry Song 21e82808fc PM / Hibernate: Fix typo in a kerneldoc comment
Fix a typo in a function name in the kerneldoc comment next to
resume_target_kernel().

[rjw: Changed the subject slightly, added the changelog.]

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:28:52 +02:00
Rafael J. Wysocki 2aede851dd PM / Hibernate: Freeze kernel threads after preallocating memory
There is a problem with the current ordering of hibernate code which
leads to deadlocks in some filesystems' memory shrinkers.  Namely,
some filesystems use freezable kernel threads that are inactive when
the hibernate memory preallocation is carried out.  Those same
filesystems use memory shrinkers that may be triggered by the
hibernate memory preallocation.  If those memory shrinkers wait for
the frozen kernel threads, the hibernate process deadlocks (this
happens with XFS, for one example).

Apparently, it is not technically viable to redesign the filesystems
in question to avoid the situation described above, so the only
possible solution of this issue is to defer the freezing of kernel
threads until the hibernate memory preallocation is done, which is
implemented by this change.

Unfortunately, this requires the memory preallocation to be done
before the "prepare" stage of device freeze, so after this change the
only way drivers can allocate additional memory for their freeze
routines in a clean way is to use PM notifiers.

Reported-by: Christoph <cr2005@u-club.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:28:52 +02:00
H Hartley Sweeten 37cce26b32 PM / VT: Cleanup #if defined uglyness and fix compile error
Introduce the config option CONFIG_VT_CONSOLE_SLEEP in order to cleanup
the #if defined ugliness for the vt suspend support functions. Note that
CONFIG_VT_CONSOLE is already dependant on CONFIG_VT.

The function pm_set_vt_switch is actually dependant on CONFIG_VT and not
CONFIG_PM_SLEEP. This fixes a compile error when CONFIG_PM_SLEEP is
not set:

drivers/tty/vt/vt_ioctl.c:1794: error: redefinition of 'pm_set_vt_switch'
include/linux/suspend.h:17: error: previous definition of 'pm_set_vt_switch' was here

Also, remove the incorrect path from the comment in console.c.

[rjw: Replaced #if defined() with #ifdef in suspend.h.]

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:28:51 +02:00
Dan Carpenter 528f7ce6e4 PM / Suspend: Off by one in pm_suspend()
In enter_state() we use "state" as an offset for the pm_states[]
array.  The pm_states[] array only has PM_SUSPEND_MAX elements so
this test is off by one.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
2011-10-16 23:27:46 +02:00
Martin Schwidefsky 85055dd805 PM / Hibernate: Include storage keys in hibernation image on s390
For s390 there is one additional byte associated with each page,
the storage key. This byte contains the referenced and changed
bits and needs to be included into the hibernation image.
If the storage keys are not restored to their previous state all
original pages would appear to be dirty. This can cause
inconsistencies e.g. with read-only filesystems.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:27:46 +02:00
Rafael J. Wysocki ca123102f6 PM: Fix build issue in main.c for CONFIG_PM_SLEEP unset
Suspend statistics should depend on CONFIG_PM_SLEEP, so make that
happen.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:27:46 +02:00
ShuoX Liu 2a77c46de1 PM / Suspend: Add statistics debugfs file for suspend to RAM
Record S3 failure time about each reason and the latest two failed
devices' names in S3 progress.
We can check it through 'suspend_stats' entry in debugfs.

The motivation of the patch:

We are enabling power features on Medfield. Comparing with PC/notebook,
a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far
more frequently. If it can't enter suspend-2-ram in time, the power
might be used up soon.

We often find sometimes, a device suspend fails. Then, system retries
s3 over and over again. As display is off, testers and developers
don't know what happens.

Some testers and developers complain they don't know if system
tries suspend-2-ram, and what device fails to suspend. They need
such info for a quick check. The patch adds suspend_stats under
debugfs for users to check suspend to RAM statistics quickly.

If not using this patch, we have other methods to get info about
what device fails. One is to turn on  CONFIG_PM_DEBUG, but users
would get too much info and testers need recompile the system.

In addition, dynamic debug is another good tool to dump debug info.
But it still doesn't match our utilization scenario closely.
1) user need write a user space parser to process the syslog output;
2) Our testing scenario is we leave the mobile for at least hours.
   Then, check its status. No serial console available during the
   testing. One is because console would be suspended, and the other
   is serial console connecting with spi or HSU devices would consume
   power. These devices are powered off at suspend-2-ram.

Signed-off-by: ShuoX Liu <shuox.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-16 23:27:45 +02:00
Colin Cross ab10023e00 cpu_pm: Add cpu power management notifiers
During some CPU power modes entered during idle, hotplug and
suspend, peripherals located in the CPU power domain, such as
the GIC, localtimers, and VFP, may be powered down.  Add a
notifier chain that allows drivers for those peripherals to
be notified before and after they may be reset.

Notified drivers can include VFP co-processor, interrupt controller
and it's PM extensions, local CPU timers context save/restore which
shouldn't be interrupted. Hence CPU PM event APIs  must be called
with interrupts disabled.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-23 12:05:29 +05:30
Jean Pihet b66213cdb0 PM QoS: Add global notification mechanism for device constraints
Add a global notification chain that gets called upon changes to the
aggregated constraint value for any device.
The notification callbacks are passing the full constraint request data
in order for the callees to have access to it. The current use is for the
platform low-level code to access the target device of the constraint.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25 15:35:47 +02:00
Jean Pihet abe98ec2d8 PM QoS: Generalize and export constraints management code
In preparation for the per-device constratins support:
 - rename update_target to pm_qos_update_target
 - generalize and export pm_qos_update_target for usage by the upcoming
   per-device latency constraints framework:
   * operate on struct pm_qos_constraints for constraints management,
   * introduce an 'action' parameter for constraints add/update/remove,
   * the return value indicates if the aggregated constraint value has
     changed,
 - update the internal code to operate on struct pm_qos_constraints
 - add a NULL pointer check in the API functions

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25 15:35:34 +02:00
Jean Pihet 4e1779baaa PM QoS: Reorganize data structs
In preparation for the per-device constratins support, re-organize
the data strctures:
 - add a struct pm_qos_constraints which contains the constraints
 related data
 - update struct pm_qos_object contents to the PM QoS internal object
 data. Add a pointer to struct pm_qos_constraints
 - update the internal code to use the new data structs.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25 15:35:27 +02:00
Jean Pihet 4a31a33425 PM QoS: Code reorganization
Move around the PM QoS misc devices management code
for better readability.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25 15:35:20 +02:00
Jean Pihet cc74998618 PM QoS: Minor clean-ups
- Misc fixes to improve code readability:
  * rename struct pm_qos_request_list to struct pm_qos_request,
  * rename pm_qos_req parameter to req in internal code,
    consistenly use req in the API parameters,
  * update the in-kernel API callers to the new parameters names,
  * rename of fields names (requests, list, node, constraints)

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25 15:35:12 +02:00
Jean Pihet e8db0be124 PM QoS: Move and rename the implementation files
The PM QoS implementation files are better named
kernel/power/qos.c and include/linux/pm_qos.h.

The PM QoS support is compiled under the CONFIG_PM option.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25 15:35:03 +02:00
Rafael J. Wysocki 17f2ae7f67 PM / Domains: Fix build for CONFIG_PM_RUNTIME unset
Function genpd_queue_power_off_work() is not defined for
CONFIG_PM_RUNTIME, so pm_genpd_poweroff_unused() causes a build
error to happen in that case.  Fix the problem by making
pm_genpd_poweroff_unused() depend on CONFIG_PM_RUNTIME too.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-14 13:34:31 +02:00
Linus Torvalds d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Rafael J. Wysocki ba1389d74f Merge branch 'pm-domains' into for-linus
* pm-domains: (33 commits)
  ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active
  PM / Domains: Take .power_off() error code into account
  ARM / shmobile: Use genpd_queue_power_off_work()
  ARM / shmobile: Use pm_genpd_poweroff_unused()
  PM / Domains: Introduce function to power off all unused PM domains
  PM / Domains: Queue up power off work only if it is not pending
  PM / Domains: Improve handling of wakeup devices during system suspend
  PM / Domains: Do not restore all devices on power off error
  PM / Domains: Allow callbacks to execute all runtime PM helpers
  PM / Domains: Do not execute device callbacks under locks
  PM / Domains: Make failing pm_genpd_prepare() clean up properly
  PM / Domains: Set device state to "active" during system resume
  ARM: mach-shmobile: sh7372 A3RV requires A4LC
  PM / Domains: Export pm_genpd_poweron() in header
  ARM: mach-shmobile: sh7372 late pm domain off
  ARM: mach-shmobile: Runtime PM late init callback
  ARM: mach-shmobile: sh7372 D4 support
  ARM: mach-shmobile: sh7372 A4MP support
  ARM: mach-shmobile: sh7372: make sure that fsi is peripheral of spu2
  ARM: mach-shmobile: sh7372 A3SG support
  ...
2011-07-15 23:59:09 +02:00
Akinobu Mita f0c077a8b7 PM: Improve error code of pm_notifier_call_chain()
This enables pm_notifier_call_chain() to get the actual error code
in the callback rather than always assume -EINVAL by converting all
PM notifier calls to return encapsulate error code with
notifier_from_errno().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-15 23:58:20 +02:00
Kevin Hilman a5e4fd8783 PM / Suspend: Export suspend_set_ops, suspend_valid_only_mem
Some platforms wish to implement their PM core suspend code as
modules.  To do so, these functions need to be exported to modules.

[rjw: Replaced EXPORT_SYMBOL with EXPORT_SYMBOL_GPL]

Reported-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-15 23:58:19 +02:00
MyungJoo Ham 3b5fe85252 PM / Suspend: Add .suspend_again() callback to suspend_ops
A system or a device may need to control suspend/wakeup events. It may
want to wakeup the system after a predefined amount of time or at a
predefined event decided while entering suspend for polling or delayed
work. Then, it may want to enter suspend again if its predefined wakeup
condition is the only wakeup reason and there is no outstanding events;
thus, it does not wakeup the userspace unnecessary or unnecessary
devices and keeps suspended as long as possible (saving the power).

Enabling a system to wakeup after a specified time can be easily
achieved by using RTC. However, to enter suspend again immediately
without invoking userland and unrelated devices, we need additional
features in the suspend framework.

Such need comes from:

 1. Monitoring a critical device status without interrupts that can
wakeup the system. (in-suspend polling)
 An example is ambient temperature monitoring that needs to shut down
the system or a specific device function if it is too hot or cold. The
temperature of a specific device may be needed to be monitored as well;
e.g., a charger monitors battery temperature in order to stop charging
if overheated.

 2. Execute critical "delayed work" at suspend.
 A driver or a system/board may have a delayed work (or any similar
things) that it wants to execute at the requested time.
 For example, some chargers want to check the battery voltage some
time (e.g., 30 seconds) after the battery is fully charged and the
charger has stopped. Then, the charger restarts charging if the voltage
has dropped more than a threshold, which is smaller than "restart-charger"
voltage, which is a threshold to restart charging regardless of the
time passed.

This patch allows to add "suspend_again" callback at struct
platform_suspend_ops and let the "suspend_again" callback return true if
the system is required to enter suspend again after the current instance
of wakeup. Device-wise suspend_again implemented at dev_pm_ops or
syscore is not done because: a) suspend_again feature is usually under
platform-wise decision and controls the behavior of the whole platform
and b) There are very limited devices related to the usage cases of
suspend_again; chargers and temperature sensors are mentioned so far.

With suspend_again callback registered at struct platform_suspend_ops
suspend_ops in kernel/power/suspend.c with suspend_set_ops by the
platform, the suspend framework tries to enter suspend again by
looping suspend_enter() if suspend_again has returned true and there has
been no errors in the suspending sequence or pending wakeups (by
pm_wakeup_pending).

Tested at Exynos4-NURI.

[rjw: Fixed up kerneldoc comment for suspend_enter().]

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-15 23:58:19 +02:00
Michael Witten 2dc98fd320 doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:20:07 +02:00
Rafael J. Wysocki 4d4cf23cdd PM / Hibernate: Fix free_unnecessary_pages()
There is a bug in free_unnecessary_pages() that causes it to
attempt to free too many pages in some cases, which triggers the
BUG_ON() in memory_bm_clear_bit() for copy_bm.  Namely, if
count_data_pages() is initially greater than alloc_normal, we get
to_free_normal equal to 0 and "save" greater from 0.  In that case,
if the sum of "save" and count_highmem_pages() is greater than
alloc_highmem, we subtract a positive number from to_free_normal.
Hence, since to_free_normal was 0 before the subtraction and is
an unsigned int, the result is converted to a huge positive number
that is used as the number of pages to free.

Fix this bug by checking if to_free_normal is actually greater
than or equal to the number we're going to subtract from it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
2011-07-06 20:15:23 +02:00
Rafael J. Wysocki b7b95920aa PM: Allow the clocks management code to be used during system suspend
The common clocks management code in drivers/base/power/clock_ops.c
is going to be used during system-wide power transitions as well as
for runtime PM, so it shouldn't depend on CONFIG_PM_RUNTIME.
However, the suspend/resume functions provided by it for
CONFIG_PM_RUNTIME unset, to be used during system-wide power
transitions, should not behave in the same way as their counterparts
defined for CONFIG_PM_RUNTIME set, because in that case the clocks
are managed differently at run time.

The names of the functions still contain the word "runtime" after
this change, but that is going to be modified by a separate patch
later.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:56 +02:00
Rafael J. Wysocki f721889ff6 PM / Domains: Support for generic I/O PM domains (v8)
Introduce common headers, helper functions and callbacks allowing
platforms to use simple generic power domains for runtime power
management.

Introduce struct generic_pm_domain to be used for representing
power domains that each contain a number of devices and may be
parent domains or subdomains with respect to other power domains.
Among other things, this structure includes callbacks to be
provided by platforms for performing specific tasks related to
power management (i.e. ->stop_device() may disable a device's
clocks, while ->start_device() may enable them, ->power_off() is
supposed to remove power from the entire power domain
and ->power_on() is supposed to restore it).

Introduce functions that can be used as power domain runtime PM
callbacks, pm_genpd_runtime_suspend() and pm_genpd_runtime_resume(),
as well as helper functions for the initialization of a power
domain represented by a struct generic_power_domain object,
adding a device to or removing a device from it and adding or
removing subdomains.

Introduce configuration option CONFIG_PM_GENERIC_DOMAINS to be
selected by the platforms that want to use the new code.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-07-02 14:29:55 +02:00
Michal Kubecek 8440f4b194 PM: Free memory bitmaps if opening /dev/snapshot fails
When opening /dev/snapshot device, snapshot_open() creates memory
bitmaps which are freed in snapshot_release(). But if any of the
callbacks called by pm_notifier_call_chain() returns NOTIFY_BAD, open()
fails, snapshot_release() is never called and bitmaps are not freed.
Next attempt to open /dev/snapshot then triggers BUG_ON() check in
create_basic_memory_bitmaps(). This happens e.g. when vmwatchdog module
is active on s390x.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
2011-06-21 23:20:06 +02:00
Rafael J. Wysocki f42a9813fb PM / Hibernate: Update kerneldoc comments in hibernate.c
Some of the kerneldoc comments in kernel/power/hibernate.c are
outdated and some of them don't adhere to the kernel's standards.
Update them and make them look in a consistent way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-05-24 23:36:06 +02:00
Rafael J. Wysocki 354258011e PM / Hibernate: Remove arch_prepare_suspend()
All architectures supporting hibernation define
arch_prepare_suspend() as an empty function, so remove it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-24 23:35:55 +02:00
Rafael J. Wysocki 4e2d9491a7 PM / Hibernate: Update some comments in core hibernate code
Some comments in the core hibernate code are outdated, some aren't
necessary any more and at least one of them is plain wrong.  Remove
those comments or update them.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-24 00:21:26 +02:00
Rafael J. Wysocki 91e7c75ba9 PM: Allow drivers to allocate memory from .prepare() callbacks safely
If device drivers allocate substantial amounts of memory (above 1 MB)
in their hibernate .freeze() callbacks (or in their legacy suspend
callbcks during hibernation), the subsequent creation of hibernate
image may fail due to the lack of memory.  This is the case, because
the drivers' .freeze() callbacks are executed after the hibernate
memory preallocation has been carried out and the preallocated amount
of memory may be too small to cover the new driver allocations.
Unfortunately, the drivers' .prepare() callbacks also are executed
after the hibernate memory preallocation has completed, so they are
not suitable for allocating additional memory either.  Thus the only
way a driver can safely allocate memory during hibernation is to use
a hibernate/suspend notifier.  However, the notifiers are called
before the freezing of user space and the drivers wanting to use them
for allocating additional memory may not know how much memory needs
to be allocated at that point.

To let device drivers overcome this difficulty rework the hibernation
sequence so that the memory preallocation is carried out after the
drivers' .prepare() callbacks have been executed, so that the
.prepare() callbacks can be used for allocating additional memory
to be used by the drivers' .freeze() callbacks.  Update documentation
to match the new behavior of the code.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17 23:26:00 +02:00
Rafael J. Wysocki c650da23d5 PM: Remove CONFIG_PM_VERBOSE
Now that we have CONFIG_DYNAMIC_DEBUG there is no need for yet
another flag causing dev_dbg() and pr_debug() statements in the
core PM code to produce output.  Moreover, CONFIG_PM_VERBOSE
causes so much output to be generated that it's not really useful
and almost no one sets it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=23182
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17 23:25:10 +02:00
Rafael J. Wysocki 290c748725 Merge branch 'power-domains' into for-linus
* power-domains:
  PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
  PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
  OMAP1 / PM: Use generic clock manipulation routines for runtime PM
  PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)
  PM / Runtime: Add subsystem data field to struct dev_pm_info
  OMAP2+ / PM: move runtime PM implementation to use device power domains
  PM / Platform: Use generic runtime PM callbacks directly
  shmobile: Use power domains for platform runtime PM
  PM: Export platform bus type's default PM callbacks
  PM: Make power domain callbacks take precedence over subsystem ones
2011-05-17 23:23:46 +02:00
Rafael J. Wysocki 2d2a9163bd Merge branch 'syscore' into for-linus
* syscore:
  PM: Remove sysdev suspend, resume and shutdown operations
  PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
  PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
  PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
  PM / Blackfin: Use struct syscore_ops instead of sysdevs for PM
  ARM / Samsung: Use struct syscore_ops for "core" power management
  ARM / PXA: Use struct syscore_ops for "core" power management
  ARM / SA1100: Use struct syscore_ops for "core" power management
  ARM / Integrator: Use struct syscore_ops for core PM
  ARM / OMAP: Use struct syscore_ops for "core" power management
  ARM: Use struct syscore_ops instead of sysdevs for PM in common code
2011-05-17 23:23:40 +02:00
Rafael J. Wysocki 1c1be3a949 Revert "PM / Hibernate: Reduce autotuned default image size"
This reverts commit bea3864fb6
(PM / Hibernate: Reduce autotuned default image size), because users
are now able to resolve the issue this commit was supposed to address
in a different way (i.e. by using the new /sys/power/reserved_size
interface).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17 23:19:19 +02:00
Rafael J. Wysocki ddeb648708 PM / Hibernate: Add sysfs knob to control size of memory for drivers
Martin reports that on his system hibernation occasionally fails due
to the lack of memory, because the radeon driver apparently allocates
too much of it during the device freeze stage.  It turns out that the
amount of memory allocated by radeon during hibernation (and
presumably during system suspend too) depends on the utilization of
the GPU (e.g. hibernating while there are two KDE 4 sessions with
compositing enabled causes radeon to allocate more memory than for
one KDE 4 session).

In principle it should be possible to use image_size to make the
memory preallocation mechanism free enough memory for the radeon
driver, but in practice it is not easy to guess the right value
because of the way the preallocation code uses image_size.  For this
reason, it seems reasonable to allow users to control the amount of
memory reserved for driver allocations made after the hibernate
preallocation, which currently is constant and amounts to 1 MB.

Introduce a new sysfs file, /sys/power/reserved_size, whose value
will be used as the amount of memory to reserve for the
post-preallocation reservations made by device drivers, in bytes.
For backwards compatibility, set its default (and initial) value to
the currently used number (1 MB).

References: https://bugzilla.kernel.org/show_bug.cgi?id=34102
Reported-and-tested-by: Martin Steigerwald <Martin@Lichtvoll.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17 23:19:19 +02:00
MyungJoo Ham 3c43193608 PM / Suspend: Do not ignore error codes returned by suspend_enter()
The current implementation of suspend-to-RAM returns 0 if there is an
error from suspend_enter(), because suspend_devices_and_enter() ignores
the return value from suspend_enter().  This patch addresses this issue
and properly keep the error return from suspend_enter() and let
suspend_devices_and_enter relay the error return.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17 23:19:16 +02:00
Rafael J. Wysocki 2e711c04db PM: Remove sysdev suspend, resume and shutdown operations
Since suspend, resume and shutdown operations in struct sysdev_class
and struct sysdev_driver are not used any more, remove them.  Also
drop sysdev_suspend(), sysdev_resume() and sysdev_shutdown() used
for executing those operations and modify all of their users
accordingly.  This reduces kernel code size quite a bit and reduces
its complexity.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-11 21:37:15 +02:00
Rafael J. Wysocki 36cb7035ea PM / Hibernate: Fix ioctl SNAPSHOT_S2RAM
The SNAPSHOT_S2RAM ioctl used for implementing the feature allowing
one to suspend to RAM after creating a hibernation image is currently
broken, because it doesn't clear the "ready" flag in the struct
snapshot_data object handled by it.  As a result, the
SNAPSHOT_UNFREEZE doesn't work correctly after SNAPSHOT_S2RAM has
returned and the user space hibernate task cannot thaw the other
processes as appropriate.  Make SNAPSHOT_S2RAM clear data->ready
to fix this problem.

Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
2011-05-11 21:10:58 +02:00
Rafael J. Wysocki 9744997a8a PM / Hibernate: Make snapshot_release() restore GFP mask
If the process using the hibernate user space interface closes
/dev/snapshot after creating a hibernation image without thawing
tasks, snapshot_release() should call pm_restore_gfp_mask() to
restore the GFP mask used before the creation of the image.  Make
that happen.

Tested-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
2011-05-11 21:10:43 +02:00
Rafael J. Wysocki 87186475a4 PM: Fix warning in pm_restrict_gfp_mask() during SNAPSHOT_S2RAM ioctl
A warning is printed by pm_restrict_gfp_mask() while the
SNAPSHOT_S2RAM ioctl is being executed after creating a hibernation
image, because pm_restrict_gfp_mask() has been called once already
before the image creation and suspend_devices_and_enter() calls it
once again.  This happens after commit 452aa6999e
(mm/pm: force GFP_NOIO during suspend/hibernation and resume).

To avoid this issue, move pm_restrict_gfp_mask() and
pm_restore_gfp_mask() from suspend_devices_and_enter() to its caller
in kernel/power/suspend.c.

Reported-by: Alexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
2011-05-11 21:10:14 +02:00
Rafael J. Wysocki 85eb8c8d0b PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)
Many different platforms and subsystems may want to disable device
clocks during suspend and enable them during resume which is going to
be done in a very similar way in all those cases.  For this reason,
provide generic routines for the manipulation of device clocks during
suspend and resume.

Convert the ARM shmobile platform to using the new routines.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-30 00:25:44 +02:00
Rafael J. Wysocki 2ca6f62f59 PM: Fix error code paths executed after failing syscore_suspend()
If syscore_suspend() fails in suspend_enter(), create_image() or
resume_target_kernel(), it is necessary to call sysdev_resume(),
because sysdev_suspend() has been called already and succeeded
and we are going to abort the transition.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-18 23:58:59 +02:00
Shriram Rajagopalan d419e4c0f7 fix XEN_SAVE_RESTORE Kconfig dependencies
Make XEN_SAVE_RESTORE select HIBERNATE_CALLBACKS.
Remove XEN_SAVE_RESTORE dependency from PM_SLEEP.

Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-11 22:54:48 +02:00
Rafael J. Wysocki 1f112cee07 PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS
Xen save/restore is going to use hibernate device callbacks for
quiescing devices and putting them back to normal operations and it
would need to select CONFIG_HIBERNATION for this purpose.  However,
that also would cause the hibernate interfaces for user space to be
enabled, which might confuse user space, because the Xen kernels
don't support hibernation.  Moreover, it would be wasteful, as it
would make the Xen kernels include a substantial amount of code that
they would never use.

To address this issue introduce new power management Kconfig option
CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code
that is necessary for the hibernate device callbacks to work and make
CONFIG_HIBERNATION select it.  Then, Xen save/restore will be able to
select CONFIG_HIBERNATE_CALLBACKS without dragging the entire
hibernate code along with it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2011-04-11 22:54:42 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
Linus Torvalds a44f99c7ef Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
  video: change to new flag variable
  scsi: change to new flag variable
  rtc: change to new flag variable
  rapidio: change to new flag variable
  pps: change to new flag variable
  net: change to new flag variable
  misc: change to new flag variable
  message: change to new flag variable
  memstick: change to new flag variable
  isdn: change to new flag variable
  ieee802154: change to new flag variable
  ide: change to new flag variable
  hwmon: change to new flag variable
  dma: change to new flag variable
  char: change to new flag variable
  fs: change to new flag variable
  xtensa: change to new flag variable
  um: change to new flag variables
  s390: change to new flag variable
  mips: change to new flag variable
  ...

Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-20 18:14:55 -07:00
matt mooney ed3cd4a865 kernel: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-17 14:02:54 +01:00
Rafael J. Wysocki bea3864fb6 PM / Hibernate: Reduce autotuned default image size
The hibernate image size autotuning mechanism sets the default
image size to 5/2 of the total system RAM, but it is reported
that on some systems device drivers allocate substantial
amounts of memory during suspend and the creation of the image
fails as a result (too little memory is preallocated).

Modify the autotuning mechanism to use 1/3 instead of 2/5 of RAM
as the default image size, which is reported to be sufficient for
the affected systems.

References: https://bugzilla.kernel.org/show_bug.cgi?id=30482
Reported-and-tested-by: Martin Steigerwald <Martin@Lichtvoll.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:45:46 +01:00
Rafael J. Wysocki 40dc166cb5 PM / Core: Introduce struct syscore_ops for core subsystems PM
Some subsystems need to carry out suspend/resume and shutdown
operations with one CPU on-line and interrupts disabled.  The only
way to register such operations is to define a sysdev class and
a sysdev specifically for this purpose which is cumbersome and
inefficient.  Moreover, the arguments taken by sysdev suspend,
resume and shutdown callbacks are practically never necessary.

For this reason, introduce a simpler interface allowing subsystems
to register operations to be executed very late during system suspend
and shutdown and very early during resume in the form of
strcut syscore_ops objects.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-15 00:43:46 +01:00
Jan Beulich cf4fb80ca3 PM: Simplify kernel/power/Kconfig
'n' defaults are pretty pointless and actually bogus when used with
prompt-less config options.

The "bool"/"default y" pair with no prompt can be expressed more
compactly using def_bool.

[rjw: Rebased on top of earlier patches modifying this file.]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:43:17 +01:00
Rafael J. Wysocki 6831c6edc7 PM: Drop pm_flags that is not necessary
The variable pm_flags is used to prevent APM from being enabled
along with ACPI, which would lead to problems.  However, acpi_init()
is always called before apm_init() and after acpi_init() has
returned, it is known whether or not ACPI will be used.  Namely, if
acpi_disabled is not set after acpi_init() has returned, this means
that ACPI is enabled.  Thus, it is sufficient to check acpi_disabled
in apm_init() to prevent APM from being enabled in parallel with
ACPI.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
2011-03-15 00:43:16 +01:00
Rafael J. Wysocki 88a6f33e4d PM: Clean up PM_TRACE dependencies and drop unnecessary Kconfig option
CONFIG_PM_SLEEP_ADVANCED_DEBUG is not used any more, so drop it
and CONFIG_CAN_PM_TRACE need not depend on EXPERIMENTAL, so remove
that dependency.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:43:15 +01:00
Rafael J. Wysocki aa33860158 PM: Remove CONFIG_PM_OPS
After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP ||
CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be
replaced with CONFIG_PM.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:43:15 +01:00
Rafael J. Wysocki 196ec24322 PM: Reorder power management Kconfig options
Reorder configuration options in kernel/power/Kconfig so that
the options depended on are at the top of the list.

This patch doesn't introduce any functional changes.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:43:15 +01:00
Rafael J. Wysocki 1eb208aea3 PM: Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME)
From the users' point of view CONFIG_PM is really only used for
making it possible to set CONFIG_SUSPEND, CONFIG_HIBERNATION,
CONFIG_PM_RUNTIME and (surprisingly enough) CONFIG_XEN_SAVE_RESTORE
(CONFIG_PM_OPP also depends on CONFIG_PM, but quite artificially).
However, both CONFIG_SUSPEND and CONFIG_HIBERNATION require platform
support (independent of CONFIG_PM) and it is not quite obvious that
CONFIG_PM has to be set for CONFIG_XEN_SAVE_RESTORE to be available.
Thus, from the users' point of view, it would be more logical to
automatically select CONFIG_PM if any of the above options depending
on it are set.

Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME),
which will cause it to be selected when any of CONFIG_SUSPEND,
CONFIG_HIBERNATION, CONFIG_PM_RUNTIME, CONFIG_XEN_SAVE_RESTORE is
set and will clarify its meaning.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:43:15 +01:00
Rafael J. Wysocki cd51e61cf4 PM / ACPI: Remove references to pm_flags from bus.c
If direct references to pm_flags are removed from drivers/acpi/bus.c,
CONFIG_ACPI will not need to depend on CONFIG_PM any more.  Make that
happen.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
2011-03-15 00:43:15 +01:00
Jens Axboe 721a9602e6 block: kill off REQ_UNPLUG
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:27 +01:00
Linus Torvalds bc3adfc670 Merge branch 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long
  workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'
  workqueue: wake up a worker when a rescuer is leaving a gcwq
2011-02-18 12:36:06 -08:00
Stanislaw Gruszka 2e725a065b PM / Hibernate: Return error code when alloc_image_page() fails
Currently we return 0 in swsusp_alloc() when alloc_image_page() fails.
Fix that.  Also remove unneeded "error" variable since the only
useful value of error is -ENOMEM.

[rjw: Fixed up the changelog and changed subject.]

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: stable@kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-16 21:53:52 +01:00
Tejun Heo 58a69cb47e workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'
There are two spellings in use for 'freeze' + 'able' - 'freezable' and
'freezeable'.  The former is the more prominent one.  The latter is
mostly used by workqueue and in a few other odd places.  Unify the
spelling to 'freezable'.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-02-16 17:48:59 +01:00
Linus Torvalds 52cfd503ad Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits)
  ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
  ACPI: fix resource check message
  ACPI / Battery: Update information on info notification and resume
  ACPI: Drop device flag wake_capable
  ACPI: Always check if _PRW is present before trying to evaluate it
  ACPI / PM: Check status of power resources under mutexes
  ACPI / PM: Rename acpi_power_off_device()
  ACPI / PM: Drop acpi_power_nocheck
  ACPI / PM: Drop acpi_bus_get_power()
  Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
  ACPI / Fan: Rework the handling of power resources
  ACPI / PM: Register power resource devices as soon as they are needed
  ACPI / PM: Register acpi_power_driver early
  ACPI / PM: Add function for updating device power state consistently
  ACPI / PM: Add function for device power state initialization
  ACPI / PM: Introduce __acpi_bus_get_power()
  ACPI / PM: Introduce function for refcounting device power resources
  ACPI / PM: Add functions for manipulating lists of power resources
  ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
  ACPICA: Update version to 20101209
  ...
2011-01-13 20:15:35 -08:00
Linus Torvalds 275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Linus Torvalds c8940eca75 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  spi / PM: Support dev_pm_ops
  PM: Prototype the pm_generic_ operations
  PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally
  PM: Use dev_name() in core device suspend and resume routines
  PM: Permit registration of parentless devices during system suspend
  PM: Replace the device power.status field with a bit field
  PM: Remove redundant checks from core device resume routines
  PM: Use a different list of devices for each stage of device suspend
  PM: Avoid compiler warning in pm_noirq_op()
  PM: Use pm_wakeup_pending() in __device_suspend()
  PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending()
  PM: Prevent dpm_prepare() from returning errors unnecessarily
  PM: Fix references to basic-pm-debugging.txt in drivers-testing.txt
  PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)
  PM / Hibernate: When failed, in_suspend should be reset
  PM / Hibernate: hibernation_ops->leave should be checked too
  Freezer: Fix a race during freezing of TASK_STOPPED tasks
  PM: Use proper ccflag flag in kernel/power/Makefile
  PM / Runtime: Fix comments to match runtime callback code
2011-01-10 08:14:53 -08:00
Rafael J. Wysocki 976513dbfc PM / ACPI: Move NVS saving and restoring code to drivers/acpi
The saving of the ACPI NVS area during hibernation and suspend and
restoring it during the subsequent resume is entirely specific to
ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS
configuration option which is redundant.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07 00:36:55 -05:00
Jiri Slaby 26fcaf60fe PM: Fix oops in suspend/hibernate code related to failing ioremap()
When ioremap() fails (which might happen for some reason), we nicely
oops in suspend_nvs_save() due to NULL dereference by memcpy() in there.
Fail gracefully instead.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07 00:26:45 -05:00
Jean Pihet 938cfed18b perf: Add calls to suspend trace point
Uses the machine_suspend trace point, called from the
generic kernel suspend_devices_and_enter function.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
CC: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-2-git-send-email-j-pihet@ti.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 21:25:28 +01:00
Rafael J. Wysocki a2867e08c8 PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending()
To avoid confusion with the meaning and return value of
pm_check_wakeup_events() replace it with pm_wakeup_pending() that
will work the other way around (ie. return true when system-wide
power transition should be aborted).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24 15:02:42 +01:00
MyungJoo Ham 5262a47502 PM / Hibernate: When failed, in_suspend should be reset
When hibernation failed due to an error in swsusp_write() called by
hibernate(), it skips calling "power_down()" and returns. When
hibernate() is called again (probably after fixing up so that
swsusp_write() wouldn't fail again), before "in_suspend = 1" of
create_image is called, in_suspend should be 0. However, because
hibernate() did not reset "in_suspend" after a failure, it's already 1.

This patch fixes such inconsistency of "in_suspend" value.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24 15:02:40 +01:00
MyungJoo Ham 5729c63a51 PM / Hibernate: hibernation_ops->leave should be checked too
Because hibernate calls hibernation_ops->leave() without checking
whether hibernation_ops->leave is NULL or not, hiberantion_set_ops
should WARN_ON if hibernation_ops->leave is NULL.

This patch added one more condition to check hibernation_ops->leave.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24 15:02:40 +01:00
Tejun Heo 8cfe400ca5 Freezer: Fix a race during freezing of TASK_STOPPED tasks
After calling freeze_task(), try_to_freeze_tasks() see whether the
task is stopped or traced and if so, considers it to be frozen;
however, nothing guarantees that either the task being frozen sees
TIF_FREEZE or the freezer sees TASK_STOPPED -> TASK_RUNNING
transition.  The task being frozen may wake up and not see TIF_FREEZE
while the freezer fails to notice the transition and believes the task
is still stopped.

This patch fixes the race by making freeze_task() always go through
fake_signal_wake_up() for applicable tasks.  The function goes through
the target task's scheduler lock and thus guarantees that either the
target sees TIF_FREEZE or try_to_freeze_task() sees TASK_RUNNING.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24 15:02:40 +01:00
Tracey Dent 133f1128b2 PM: Use proper ccflag flag in kernel/power/Makefile
Use the ccflags-$ flag instead of EXTRA_CFLAGS because EXTRA_CFLAGS is
deprecated and should now be switched.  According to
(documentation/kbuild/makefiles.txt).

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24 15:02:40 +01:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Rafael J. Wysocki be8cd644c4 PM / Hibernate: Restore old swap signature to avoid user space breakage
Commit 3624eb0 (PM / Hibernate: Modify signature used to mark swap)
attempted to modify hibernate signature used to mark swap partitions
containing hibernation images, so that old kernels don't try to
handle compressed images.  However, this change broke resume from
hibernation on Fedora 14 that apparently doesn't pass the resume=
argument to the kernel and tries to trigger resume from early user
space.  This doesn't work, because the signature is now different,
so the old signature has to be restored to avoid the problem.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22732 .

Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Reported-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-16 17:08:58 +01:00
Takashi Iwai 1497dd1d29 PM / Hibernate: Fix PM_POST_* notification with user-space suspend
The user-space hibernation sends a wrong notification after the image
restoration because of thinko for the file flag check.  RDONLY
corresponds to hibernation and WRONLY to restoration, confusingly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
2010-12-16 17:08:43 +01:00
Rafael J. Wysocki c9e664f1fd PM / Hibernate: Fix memory corruption related to swap
There is a problem that swap pages allocated before the creation of
a hibernation image can be released and used for storing the contents
of different memory pages while the image is being saved.  Since the
kernel stored in the image doesn't know of that, it causes memory
corruption to occur after resume from hibernation, especially on
systems with relatively small RAM that need to swap often.

This issue can be addressed by keeping the GFP_IOFS bits clear
in gfp_allowed_mask during the entire hibernation, including the
saving of the image, until the system is finally turned off or
the hibernation is aborted.  Unfortunately, for this purpose
it's necessary to rework the way in which the hibernate and
suspend code manipulates gfp_allowed_mask.

This change is based on an earlier patch from Hugh Dickins.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: stable@kernel.org
2010-12-06 23:52:08 +01:00
Bojan Smojver 9f339caf84 PM / Hibernate: Use async I/O when reading compressed hibernation image
This is a fix for reading LZO compressed image using async I/O.
Essentially, instead of having just one page into which we keep
reading blocks from swap, we allocate enough of them to cover the
largest compressed size and then let block I/O pick them all up. Once
we have them all (and here we wait), we decompress them, as usual.
Obviously, the very first block we still pick up synchronously,
because we need to know the size of the lot before we pick up the
rest.

Also fixed the copyright line, which I've forgotten before.

Signed-off-by: Bojan Smojver <bojan@rexursive.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-06 23:38:29 +01:00
Lionel Debroux 2f55ac072f suspend: constify platform_suspend_ops
While at it, fix two checkpatch errors.
Several non-const struct instances constified by this patch were added after
the introduction of platform_suspend_ops in checkpatch.pl's list of "should
be const" structs (79404849e9).

Patch against mainline.
Inspired by hunks of the grsecurity patch, updated for newer kernels.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-16 14:14:02 +01:00
Lionel Debroux 073ef1f6e5 hibernation: constify platform_hibernation_ops
Patch against mainline.

Changes since v1: added one hunk; no longer adding "const" qualifier to
pointers in platform_hibernation_ops after seeing
b4144e4f6e.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-16 14:13:58 +01:00
Tejun Heo d4d7762995 block: clean up blkdev_get() wrappers and their users
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().

blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.

All users are converted.  Most conversions are mechanical and don't
introduce any behavior difference.  There are several exceptions.

* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
  reason to OR it explicitly on blkdev_put().

* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
  sb->s_mode.

* With the above changes, sb->s_mode now always should contain
  FMODE_EXCL.  WARN_ON_ONCE() added to kill_block_super() to detect
  errors.

The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:18 +01:00
Tejun Heo e525fd89d3 block: make blkdev_get/put() handle exclusive access
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:17 +01:00
Mark Brown 43e60861fe PM / OPP: Hide OPP configuration when SoCs do not provide an implementation
Since the OPP API is only useful with an appropraite SoC-specific
implementation there is no point in offering the ability to enable
the API on general systems. Provide an ARCH_HAS OPP Kconfig symbol
which masks out the option unless selected by an implementation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-11-11 01:51:26 +01:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Jan Beulich 3ecb01df32 use clear_page()/copy_page() in favor of memset()/memcpy() on whole pages
After all that's what they are intended for.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:13 -07:00
Peter Zijlstra 61ecdb801e mm: strictly nested kmap_atomic()
Ensure kmap_atomic() usage is strictly nested

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Nishanth Menon e1f60b292f PM: Introduce library for device-specific OPPs (v7)
SoCs have a standard set of tuples consisting of frequency and
voltage pairs that the device will support per voltage domain. These
are called Operating Performance Points or OPPs. The actual
definitions of OPP varies over silicon versions. For a specific domain,
we can have a set of {frequency, voltage} pairs. As the kernel boots
and more information is available, a default set of these are activated
based on the precise nature of device. Further on operation, based on
conditions prevailing in the system (such as temperature), some OPP
availability may be temporarily controlled by the SoC frameworks.

To implement an OPP, some sort of power management support is necessary
hence this library depends on CONFIG_PM.

Contributions include:
Sanjeev Premi for the initial concept:
	http://patchwork.kernel.org/patch/50998/
Kevin Hilman for converting original design to device-based.
Kevin Hilman and Paul Walmsey for cleaning up many of the function
abstractions, improvements and data structure handling.
Romit Dasgupta for using enums instead of opp pointers.
Thara Gopinath, Eduardo Valentin and Vishwanath BS for fixes and
cleanups.
Linus Walleij for recommending this layer be made generic for usage
in other architectures beyond OMAP and ARM.
Mark Brown, Andrew Morton, Rafael J. Wysocki, Paul E. McKenney for
valuable improvements.

Discussions and comments from:
http://marc.info/?l=linux-omap&m=126033945313269&w=2
http://marc.info/?l=linux-omap&m=125482970102327&w=2
http://marc.info/?t=125809247500002&r=1&w=2
http://marc.info/?l=linux-omap&m=126025973426007&w=2
http://marc.info/?t=128152609200064&r=1&w=2
http://marc.info/?t=128468723000002&r=1&w=2
incorporated.

v1: http://marc.info/?t=128468723000002&r=1&w=2

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:50 +02:00
James Hogan d33ac60bea PM: Add sysfs attr for rechecking dev hash from PM trace
If the device which fails to resume is part of a loadable kernel module
it won't be checked at startup against the magic number stored in the
RTC.

Add a read-only sysfs attribute /sys/power/pm_trace_dev_match which
contains a list of newline separated devices (usually just the one)
which currently match the last magic number. This allows the device
which is failing to resume to be found after the modules are loaded
again.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:50 +02:00
Rafael J. Wysocki 3624eb04c2 PM / Hibernate: Modify signature used to mark swap
Since we are adding compression to the kernel's hibernate code,
change signature used by it to mark swap spaces, so that earlier
kernels don't attempt to restore compressed images they cannot
handle.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
2010-10-17 01:57:49 +02:00
Rafael J. Wysocki dbeeec5fe8 PM: Allow wakeup events to abort freezing of tasks
If there is a wakeup event during the freezing of tasks, suspend or
hibernation will fail anyway.  Since try_to_freeze_tasks() can take
up to 20 seconds to complete or fail, aborting it as soon as a wakeup
event is detected improves the worst case wakeup latency.

Based on a patch from Arve Hjønnevåg.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
2010-10-17 01:57:49 +02:00
Rafael J. Wysocki d0941ead3f PM / Hibernate: Make some boot messages look less scary
The hibernate resume code checks if there is an image to resume from
on every boot and, if the kernel is built with CONFIG_PM_DEBUG set
and the image is not present, it prints some scary messages
suggesting there was a boot error of some sort.  Apparently, some
users are confused by them, so make them look less scary and adjust
the other hibernate resume debug messages to match them.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:48 +02:00
Rafael J. Wysocki 074037ec79 PM / Wakeup: Introduce wakeup source objects and event statistics (v3)
Introduce struct wakeup_source for representing system wakeup sources
within the kernel and for collecting statistics related to them.
Make the recently introduced helper functions pm_wakeup_event(),
pm_stay_awake() and pm_relax() use struct wakeup_source objects
internally, so that wakeup statistics associated with wakeup devices
can be collected and reported in a consistent way (the definition of
pm_relax() is changed, which is harmless, because this function is
not called directly by anyone yet).  Introduce new wakeup-related
sysfs device attributes in /sys/devices/.../power for reporting the
device wakeup statistics.

Change the global wakeup events counters event_count and
events_in_progress into atomic variables, so that it is not necessary
to acquire a global spinlock in pm_wakeup_event(), pm_stay_awake()
and pm_relax(), which should allow us to avoid lock contention in
these functions on SMP systems with many wakeup devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-17 01:57:43 +02:00
Rafael J. Wysocki ac5c24ec1e PM / Hibernate: Make default image size depend on total RAM size
The default hibernation image size is currently hard coded and euqal
to 500 MB, which is not a reasonable default on many contemporary
systems.  Make it equal 2/5 of the total RAM size (this is slightly
below the maximum, i.e. 1/2 of the total RAM size, and seems to be
generally suitable).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: M. Vefa Bicakci <bicave@superonline.com>
2010-10-17 01:57:43 +02:00
Rafael J. Wysocki 266f1a25ef PM / Hibernate: Improve comments in hibernate_preallocate_memory()
One comment in hibernate_preallocate_memory() is wrong, so fix it and
add one more comment to clarify the meaning of the fixed one.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:42 +02:00
Rafael J. Wysocki bcb5ba8b4e PM / Runtime: Use alloc_workqueue() for creating the PM workqueue
Although we need the PM workqueue to be freezable, we don't need it
to be singlethread.  Also, the number of concurrent work items
running on a single CPU need not be constrained.  For these reasons
use alloc_workqueue() directly, with suitable arguments, instead of
create_freezeable_workqueue(), to create the runtime PM workqueue.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Tejun Heo <tj@kernel.org>
2010-10-17 01:57:42 +02:00
Rafael J. Wysocki ede890c2c0 PM: Fix unmet dependency warning from kconfig
Fix the following build warning:

warning: (PM_SLEEP_SMP && SMP && (ARCH_SUSPEND_POSSIBLE || \
ARCH_HIBERNATION_POSSIBLE) && PM_SLEEP) selects HOTPLUG_CPU which \
has unmet direct dependencies (SMP && HOTPLUG)

by selecting HOTPLUG along with CPU_HOTPLUG.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2010-10-17 01:57:42 +02:00
Bojan Smojver f996fc9671 PM / Hibernate: Compress hibernation image with LZO
Compress hibernation image with LZO in order to save on I/O and
therefore time to hibernate/thaw.

[rjw: Added hibernate=nocompress command line option instead of just
 nocompress which would be confusing, fixed a couple of compiler
 warnings, fixed kerneldoc comments, minor cleanups.]

Signed-off-by: Bojan Smojver <bojan@rexursive.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:42 +02:00
Linus Torvalds 84e1d836ef Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Avoid hitting OOM during preallocation of memory
  PM QoS: Correct pr_debug() misuse and improve parameter checks
  PM: Prevent waiting forever on asynchronous resume after failing suspend
2010-09-11 15:50:53 -07:00
Rafael J. Wysocki 6715045ddc PM / Hibernate: Avoid hitting OOM during preallocation of memory
There is a problem in hibernate_preallocate_memory() that it calls
preallocate_image_memory() with an argument that may be greater than
the total number of available non-highmem memory pages.  If that's
the case, the OOM condition is guaranteed to trigger, which in turn
can cause significant slowdown to occur during hibernation.

To avoid that, make preallocate_image_memory() adjust its argument
before calling preallocate_image_pages(), so that the total number of
saveable non-highem pages left is not less than the minimum size of
a hibernation image.  Change hibernate_preallocate_memory() to try to
allocate from highmem if the number of pages allocated by
preallocate_image_memory() is too low.

Modify free_unnecessary_pages() to take all possible memory
allocation patterns into account.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: M. Vefa Bicakci <bicave@superonline.com>
2010-09-11 21:03:53 +02:00
Hugh Dickins 910321ea81 swap: revert special hibernation allocation
Please revert 2.6.36-rc commit d2997b1042
"hibernation: freeze swap at hibernation".  It complicated matters by
adding a second swap allocation path, just for hibernation; without in any
way fixing the issue that it was intended to address - page reclaim after
fixing the hibernation image might free swap from a page already imaged as
swapcache, letting its swap be reallocated to store a different page of
the image: resulting in data corruption if the imaged page were freed as
clean then swapped back in.  Pages freed to si->swap_map were still in
danger of being reallocated by the alternative allocation path.

I guess it inadvertently fixed slow SSD swap allocation for hibernation,
as reported by Nigel Cunningham: by missing out the discards that occur on
the usual swap allocation path; but that was unintentional, and needs a
separate fix.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:25 -07:00
Dmitry Torokhov 1495cc9df4 Input: sysrq - drop tty argument from sysrq ops handlers
Noone is using tty argument so let's get rid of it.

Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-19 22:07:06 -07:00
Linus Torvalds 2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
KAMEZAWA Hiroyuki d2997b1042 hibernation: freeze swap at hibernation
When taking a memory snapshot in hibernate_snapshot(), all (directly
called) memory allocations use GFP_ATOMIC.  Hence swap misusage during
hibernation never occurs.

But from a pessimistic point of view, there is no guarantee that no page
allcation has __GFP_WAIT.  It is better to have a global indication "we
enter hibernation, don't use swap!".

This patch tries to freeze new-swap-allocation during hibernation.  (All
user processes are frozenm so swapin is not a concern).

This way, no updates will happen to swap_map[] between
hibernate_snapshot() and save_image().  Swap is thawed when swsusp_free()
is called.  We can be assured that swap corruption will not occur.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:04 -07:00
Linus Torvalds 3b7433b8a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-07 12:42:58 -07:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Linus Torvalds 3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Pavel Machek a2531293db update email address
pavel@suse.cz no longer works, replace it with working address.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-19 10:56:54 +02:00
Rafael J. Wysocki ce4410116c PM / Suspend: Fix ordering of calls in suspend error paths
The ACPI suspend code calls suspend_nvs_free() at a wrong place,
which may lead to a memory leak if there's an error executing
acpi_pm_prepare(), because acpi_pm_finish() will not be called in
that case.  However, the root cause of this problem is the
apparently confusing ordering of calls in suspend error paths that
needs to be fixed.

In addition to that, fix a typo in a label name in suspend.c.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
2010-07-19 02:00:35 +02:00
Rafael J. Wysocki d074ee023f PM / Hibernate: Fix snapshot error code path
There is an inconsistency between hibernation_platform_enter()
and hibernation_snapshot(), because the latter calls
hibernation_ops->end() after failing hibernation_ops->begin(), while
the former doesn't do that.  Make hibernation_snapshot() behave in
the same way as hibernation_platform_enter() in that respect.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
2010-07-19 02:00:35 +02:00
Rafael J. Wysocki f6f71f1875 PM / Hibernate: Fix hibernation_platform_enter()
The hibernation_platform_enter() function calls dpm_suspend_noirq()
instead of dpm_resume_noirq() by mistake.  Fix this.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
2010-07-19 02:00:35 +02:00
Rafael J. Wysocki c125e96f04 PM: Make it possible to avoid races between wakeup and system sleep
One of the arguments during the suspend blockers discussion was that
the mainline kernel didn't contain any mechanisms making it possible
to avoid races between wakeup and system suspend.

Generally, there are two problems in that area.  First, if a wakeup
event occurs exactly when /sys/power/state is being written to, it
may be delivered to user space right before the freezer kicks in, so
the user space consumer of the event may not be able to process it
before the system is suspended.  Second, if a wakeup event occurs
after user space has been frozen, it is not generally guaranteed that
the ongoing transition of the system into a sleep state will be
aborted.

To address these issues introduce a new global sysfs attribute,
/sys/power/wakeup_count, associated with a running counter of wakeup
events and three helper functions, pm_stay_awake(), pm_relax(), and
pm_wakeup_event(), that may be used by kernel subsystems to control
the behavior of this attribute and to request the PM core to abort
system transitions into a sleep state already in progress.

The /sys/power/wakeup_count file may be read from or written to by
user space.  Reads will always succeed (unless interrupted by a
signal) and return the current value of the wakeup events counter.
Writes, however, will only succeed if the written number is equal to
the current value of the wakeup events counter.  If a write is
successful, it will cause the kernel to save the current value of the
wakeup events counter and to abort the subsequent system transition
into a sleep state if any wakeup events are reported after the write
has returned.

[The assumption is that before writing to /sys/power/state user space
will first read from /sys/power/wakeup_count.  Next, user space
consumers of wakeup events will have a chance to acknowledge or
veto the upcoming system transition to a sleep state.  Finally, if
the transition is allowed to proceed, /sys/power/wakeup_count will
be written to and if that succeeds, /sys/power/state will be written
to as well.  Still, if any wakeup events are reported to the PM core
by kernel subsystems after that point, the transition will be
aborted.]

Additionally, put a wakeup events counter into struct dev_pm_info and
make these per-device wakeup event counters available via sysfs,
so that it's possible to check the activity of various wakeup event
sources within the kernel.

To illustrate how subsystems can use pm_wakeup_event(), make the
low-level PCI runtime PM wakeup-handling code use it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-19 01:58:48 +02:00
Cesar Eduardo Barros 9013367339 PM / Hibernate: Fix typos in comments in kernel/power/swap.c
There are a few typos in kernel/power/swap.c.  Fix them.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-07-19 01:58:47 +02:00
Tejun Heo a0a1a5fd4f workqueue: reimplement workqueue freeze using max_active
Currently, workqueue freezing is implemented by marking the worker
freezeable and calling try_to_freeze() from dispatch loop.
Reimplement it using cwq->limit so that the workqueue is frozen
instead of the worker.

* workqueue_struct->saved_max_active is added which stores the
  specified max_active on initialization.

* On freeze, all cwq->max_active's are quenched to zero.  Freezing is
  complete when nr_active on all cwqs reach zero.

* On thaw, all cwq->max_active's are restored to wq->saved_max_active
  and the worklist is repopulated.

This new implementation allows having single shared pool of workers
per cpu.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:12 +02:00
Matthew Garrett dd4c4f17d7 suspend: Move NVS save/restore code to generic suspend functionality
Saving platform non-volatile state may be required for suspend to RAM as
well as hibernation. Move it to more generic code.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10 11:02:34 -04:00
Randy Dunlap 0fef8b1e83 PM / Hibernate: Fix block_io.c printk warning
Fix printk format warning in block_io.c:

kernel/power/block_io.c:41: warning: format '%ld' expects type 'long int', but argument 2 has type 'sector_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby 6f612af578 PM / Hibernate: Group swap ops
Move all the swap processing into one function. It will make swap
calls from a non-swap code easier.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby 51fb352b2c PM / Hibernate: Move the first_sector out of swsusp_write
The first sector knowledge is swap-only specific. Move it into the
swap handle. This will be needed for later non-swap specific code
moving into snapshot.c.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby 8a0d613fa1 PM / Hibernate: Separate block_io
Move block I/O operations to a separate file. It is because it will
be used later not only by the swap writer.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:18 +02:00
Jiri Slaby d3c1b24c50 PM / Hibernate: Snapshot cleanup
Remove support of reads with offset. This means snapshot_read/write_next
now does not accept count parameter. It allows to clean up the functions
and snapshot handle which no longer needs to care about offsets.

/dev/snapshot handler is converted to simple_{read_from,write_to}_buffer
which take care of offsets.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:17 +02:00
Jiri Slaby d88d4050dc PM / Hibernate: user.c, fix SNAPSHOT_SET_SWAP_AREA handling
When CONFIG_DEBUG_BLOCK_EXT_DEVT is set we decode the device
improperly by old_decode_dev and it results in an error while
hibernating with s2disk.

All users already pass the new device number, so switch to
new_decode_dev().

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
2010-04-10 22:28:56 +02:00
Tejun Heo 336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Matt Helsley 5a7aadfe2f Freezer: Fix buggy resume test for tasks frozen with cgroup freezer
When the cgroup freezer is used to freeze tasks we do not want to thaw
those tasks during resume. Currently we test the cgroup freezer
state of the resuming tasks to see if the cgroup is FROZEN.  If so
then we don't thaw the task. However, the FREEZING state also indicates
that the task should remain frozen.

This also avoids a problem pointed out by Oren Ladaan: the freezer state
transition from FREEZING to FROZEN is updated lazily when userspace reads
or writes the freezer.state file in the cgroup filesystem. This means that
resume will thaw tasks in cgroups which should be in the FROZEN state if
there is no read/write of the freezer.state file to trigger this
transition before suspend.

NOTE: Another "simple" solution would be to always update the cgroup
freezer state during resume. However it's a bad choice for several reasons:
Updating the cgroup freezer state is somewhat expensive because it requires
walking all the tasks in the cgroup and checking if they are each frozen.
Worse, this could easily make resume run in N^2 time where N is the number
of tasks in the cgroup. Finally, updating the freezer state from this code
path requires trickier locking because of the way locks must be ordered.

Instead of updating the freezer state we rely on the fact that lazy
updates only manage the transition from FREEZING to FROZEN. We know that
a cgroup with the FREEZING state may actually be FROZEN so test for that
state too. This makes sense in the resume path even for partially-frozen
cgroups -- those that really are FREEZING but not FROZEN.

Reported-by: Oren Ladaan <orenl@cs.columbia.edu>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-03-26 23:51:44 +01:00
Xiaotian Feng 4f598458ea Freezer: Only show the state of tasks refusing to freeze
show_state will dump all tasks state, so if freezer failed to freeze
any task, kernel will dump all tasks state and flood the dmesg log.
This patch makes freezer only show state of tasks refusing to freeze.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-03-26 23:51:13 +01:00
Rafael J. Wysocki 452aa6999e mm/pm: force GFP_NOIO during suspend/hibernation and resume
There are quite a few GFP_KERNEL memory allocations made during
suspend/hibernation and resume that may cause the system to hang, because
the I/O operations they depend on cannot be completed due to the
underlying devices being suspended.

Avoid this problem by clearing the __GFP_IO and __GFP_FS bits in
gfp_allowed_mask before suspend/hibernation and restoring the original
values of these bits in gfp_allowed_mask durig the subsequent resume.

[akpm@linux-foundation.org: fix CONFIG_PM=n linkage]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:26 -08:00
Rafael J. Wysocki a9c9b4429d PM / Hibernate: Fix preallocating of memory
The hibernate memory preallocation code allocates memory to push some
user space data out of physical RAM, so that the hibernation image is
not too large.  It allocates more memory than necessary for creating
the image, so it has to release some pages to make room for
allocations made while suspending devices and disabling nonboot CPUs,
or the system will hang due to the lack of free pages to allocate
from.  Unfortunately, the function used for freeing these pages,
free_unnecessary_pages(), contains a bug that prevents it from doing
the job on all systems without highmem.

Fix this problem, which is a regression from the 2.6.30 kernel, by
using the right condition for the termination of the loop in
free_unnecessary_pages().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Cc: stable@kernel.org
2010-02-26 20:39:13 +01:00
Jiri Slaby f8bb0db818 PM / Hibernate: Remove swsusp.c finally
Its contents and entry in Makefile were already removed in
8e60c6a134
(Shift remaining code from swsusp.c to hibernate.c)
but somehow it remained in-place (rjw: which most likely was my
mistake).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:13 +01:00
Frans Pop 07c3bb5797 PM / Hibernate: Remove trailing space in message
Remove a trailing space from a message in swsusp_save().

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:13 +01:00
Jiri Slaby 09c09bc618 PM / Hibernate: Swap, remove useless check from swsusp_read()
It will never reach here if the sws_resume_bdev is erratic.
swsusp_read() is called only from software_resume(), but after
swsusp_check() which would catch the error state.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:11 +01:00
Jiri Slaby b694e52ebd PM / Hibernate: Really deprecate deprecated user ioctls
They were deprecated and removed from exported headers more than 2
years ago. Inform users about their removal in the future now.

(Switch cases needed to be reorderded for an easy fall through.)

And add an entry to feature-removal-schedule.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:11 +01:00
Rafael J. Wysocki 5a2eb8585f PM: Add facility for advanced testing of async suspend/resume
Add configuration switch CONFIG_PM_ADVANCED_DEBUG for compiling in
extra PM debugging/testing code allowing one to access some
PM-related attributes of devices from the user space via sysfs.

If CONFIG_PM_ADVANCED_DEBUG is set, add sysfs attribute power/async
for every device allowing the user space to access the device's
power.async_suspend flag and modify it, if desired.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:10 +01:00
Rafael J. Wysocki 0e06b4a891 PM: Add a switch for disabling/enabling asynchronous suspend/resume
Add sysfs attribute /sys/power/pm_async allowing the user space to
disable/enable asynchronous suspend/resume of devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-02-26 20:39:10 +01:00
Rafael J. Wysocki 6cbf82148f PCI PM: Run-time callbacks for PCI bus type
Introduce run-time PM callbacks for the PCI bus type.  Make the new
callbacks work in analogy with the existing system sleep PM
callbacks, so that the drivers already converted to struct dev_pm_ops
can use their suspend and resume routines for run-time PM without
modifications.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:21:19 -08:00
Bernhard Walle 5ada918b82 vt: introduce and use vt_kmsg_redirect() function
The kernel offers with TIOCL_GETKMSGREDIRECT ioctl() the possibility to
redirect the kernel messages to a specific console.

However, since it's not possible to switch to the kernel message console
after a panic(), it would be nice if the kernel would print the panic
message on the current console.

This patch series adds a new interface to access the global kmsg_redirect
variable by a function to be able to use it in code where
CONFIG_VT_CONSOLE is not set (kernel/panic.c).

This patch:

Instead of using and exporting a global value kmsg_redirect, introduce a
function vt_kmsg_redirect() that both can set and return the console where
messages are printed.

Change all users of kmsg_redirect (the VT code itself and kernel/power.c)
to the new interface.

The main advantage is that vt_kmsg_redirect() can also be used when
CONFIG_VT_CONSOLE is not set.

Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:28 -08:00
Alan Stern 7b199ca202 PM / Runtime: Export the PM runtime workqueue
This patch (as1306) exports the PM runtime workqueue for use by
loadable modules.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-06 16:17:56 +01:00
Jiri Slaby 66d0ae4d6f PM / Hibernate: Swap, use KERN_CONT
Use KERN_CONT in save_image() for printks, so that anybody won't
try to add a loglevel.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-06 16:16:24 +01:00
Nigel Cunningham 8e60c6a134 PM / Hibernate: Shift remaining code from swsusp.c to hibernate.c
Shift the remaining declaration of the variable in_suspend and the
function swsusp_show_speed from swsusp.c to hibernate.c, and delete
swsusp.c.

Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-06 16:16:07 +01:00
Nigel Cunningham 0414f2ec03 PM / Hibernate: Move swap functions to kernel/power/swap.c.
Move hibernation code's functions for allocating and freeing swap
from swsusp.c to swap.c, which is where you'd expect to find them.

Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-06 16:15:53 +01:00
Rafael J. Wysocki 64357ed468 Merge branch 'master' into for-linus 2009-12-06 16:06:11 +01:00
Jiri Slaby bf9fd67a03 PM / Hibernate: Add newline to load_image() fail path
Finish a line by \n when load_image fails in the middle of loading.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-11-03 11:03:09 +01:00
Jiri Slaby 4ff277f9e4 PM / Hibernate: Fix error handling in save_image()
There are too many retval variables in save_image(). Thus error return
value from snapshot_read_next() may be ignored and only part of the
snapshot (successfully) written.

Remove 'error' variable, invert the condition in the do-while loop
and convert the loop to use only 'ret' variable.

Switch the rest of the function to consider only 'ret'.

Also make sure we end printed line by \n if an error occurs.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-11-03 11:02:43 +01:00
Jiri Slaby 76b57e613f PM / Hibernate: Fix blkdev refleaks
While cruising through the swsusp code I found few blkdev reference
leaks of resume_bdev.

swsusp_read: remove blkdev_put altogether. Some fail paths do
             not do that.
swsusp_check: make sure we always put a reference on fail paths
software_resume: all fail paths between swsusp_check and swsusp_read
                 omit swsusp_close. Add it in those cases. And since
                 swsusp_read doesn't drop the reference anymore, do
                 it here unconditionally.

[rjw: Fixed a small coding style issue.]

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-11-03 11:01:46 +01:00
Tejun Heo be404f0212 PM / freezer: Don't get over-anxious while waiting
Freezing isn't exactly the most latency sensitive operation and
there's no reason to burn cpu cycles and power waiting for it to
complete.  msleep(10) instead of yield().  This should improve
reliability of emergency hibernation.

[rjw: Modified the comment next to the msleep(10).]

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-10-28 22:53:09 +01:00
Rafael J. Wysocki 04bf7539c0 PM: Make warning in suspend_test_finish() less likely to happen
Increase TEST_SUSPEND_SECONDS to 10 so the warning in
suspend_test_finish() doesn't annoy the users of slower systems so much.

Also, make the warning print the suspend-resume cycle time, so that we
know why the warning actually triggered.

Patch prepared during the hacking session at the Kernel Summit in Tokyo.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-22 08:23:45 +09:00
Alexey Dobriyan 2bcd57ab61 headers: utsname.h redux
* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 18:13:10 -07:00
Alexey Dobriyan 1a8670a29b oom: move oom_killer_enable()/oom_killer_disable to where they belong
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Jan Beulich 3c1596efe1 mm: don't use alloc_bootmem_low() where not strictly needed
Since alloc_bootmem() will never return inaccessible (via virtual
addressing) memory anyway, using the ..._low() variant only makes sense
when the physical address range of the allocated memory must fulfill
further constraints, espacially since on 64-bits (or more generally in all
cases where the pools the two variants allocate from are than the full
available range.

Probably the use in alloc_tce_table() could also be eliminated (based on
code inspection of pci-calgary_64.c), but that seems too risky given I
know nothing about that hardware and have no way to test it.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Alan Cox 8d233558cd vt: remove power stuff from kernel/power
In the past someone gratuitiously borrowed chunks of kernel internal vt
code and dumped them in kernel/power. They have all sorts of deep relations
with the vt code so put them in the vt tree instead

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:25 -07:00
Wu Fengguang 8de0307326 PM: Trivial fixes
Fix the definition of BM_BITS_PER_BLOCK and kerneldoc
description of create_bm_block_list().

[rjw: Added changelog.]

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-09-14 20:26:59 +02:00