Commit Graph

4320 Commits

Author SHA1 Message Date
Linus Torvalds 8691c130fa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
 "You will get the following new drivers:

   - Qualcomm PM8941 power key drver
   - ChipOne icn8318 touchscreen controller driver
   - Broadcom iProc touchscreen and keypad drivers
   - Semtech SX8654 I2C touchscreen controller driver

  ALPS driver now supports newer SS4 devices; Elantech got a fix that
  should make it work on some ASUS laptops; and a slew of other
  enhancements and random fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: alps - non interleaved V2 dualpoint has separate stick button bits
  Input: alps - fix touchpad buttons getting stuck when used with trackpoint
  Input: atkbd - document "no new force-release quirks" policy
  Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static
  Input: ALPS - V7 devices can report 5-finger taps
  Input: ALPS - add support for SS4 touchpad devices
  Input: ALPS - refactor alps_set_abs_params_mt()
  Input: elantech - fix absolute mode setting on some ASUS laptops
  Input: atmel_mxt_ts - split out touchpad initialisation logic
  Input: atmel_mxt_ts - implement support for T100 touch object
  Input: cros_ec_keyb - fix clearing keyboard state on wakeup
  Input: gscps2 - drop pci_ids dependency
  Input: synaptics - allocate 3 slots to keep stability in image sensors
  Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots""
  Input: MT - make slot assignment work for overcovered solutions
  mfd: tc3589x: enforce device-tree only mode
  Input: tc3589x - localize platform data
  Input: tsc2007 - Convert msecs to jiffies only once
  Input: edt-ft5x06 - remove EV_SYN event report
  Input: edt-ft5x06 - allow to setting the maximum axes value through the DT
  ...
2015-04-14 18:25:15 -07:00
Linus Torvalds f0c1bc95a1 == Changes to existing drivers ==
- Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x
    - Rename child driver [max77693-flash => max77693-led]; max77693
    - Error handling fixes; intel_soc_pmic
    - GPIO tweaking; intel_soc_pmic
    - Remove non-DT code; vexpress-sysreg, tc3589x
    - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr,
                                 rtc-s5m, sec-core, max77693, menelaus,
                                 wm5102-tables
    - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693,
                      mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power,
                      lpc_ich, menelaus, twl6040
    - Update register/address values; rts5227, rts5249
    - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x,
                                         qcom-rpm, qcom-spmi-pmic
    - Couple of trivial core Kconfig fixups
    - Remove use of seq_printf return value; ab8500-debugfs
    - Remove __exit markups; menelaus, tps65010
    - Fix platform-device name collisions; mfd-core
 
  == New drivers/supported devices ==
    - Add support for wm8280/wm8281 into arizona
    - Add support for COMe-cBL6 into kempld-core
    - Add support for rts524a and rts525a into rts5249
    - Add support for ipq8064 into qcom_rpm
    - Add support for extcon into axp20x
    - New MediaTek MT6397 PMIC driver
    - New Maxim MAX77843 PMIC dirver
    - New Intel Quark X1000 I2C-GPIO driver
    - New Skyworks SKY81452 driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVLQlhAAoJEFGvii+H/HdhnSYP/i7h+0/uvI32+49XlQWO/zZv
 SIcnNcekSj/8MIIpSOZftY+ejdqyo8NHY0dvNTmxekY65ov/yXA6aJGDd5rr3xyL
 hd9E5e5nwxc4UTV2kJwPBgCIKIjx/idRgOMTEpIa1v4KY8Gn43xc81X4s+BusbCE
 WK8hPdBUePRDmMLrRzhkVHqrfeMSSLN5Z/fhmQehWqahE1asPZ2FOnTC6tFlGxgm
 I55FAMvWey+qv4g28+nQrC9RQMetCL2f/6o53jMEQoaRQdJbbrxMybBnNvpcXwbR
 JECPiV+2R0EqBd3xiT2gbPLAqmMDexIP1Cybh3BBRcFveJeJGqmMCFwMio6kotkA
 IIMlYNcwczufPVWIIqz3U2OtJ5EWzxPgco2aA4a1Ej1nbUC29o829fMahZY0SR8m
 O2zX/MpmYPZCg3mHOFQ4oPwalIM7oKv79NTV25Ks9r+rv+zNaBc8TPCE/Oxkxfj8
 IdJ/vKQaKMmMZA1THO8HMK9qAQV7vZL12XquVzrAgq40RZa+nOUXEk0J0rHI0VaO
 BHNMBv1D3iNQfR7cWAappDavhoZcFtIY/Z9x7OsLYm/W8+CxhdAafMNH0AJPlfts
 NR7RoNtStumXdq6QzDdA27Mp1sXkHz/kgGMVE4t9mdLVmD9C0MqVi8VPFUN+sST0
 vAKAhQ/cnXCKVxe6I9/3
 =QPNn
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:

   - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x
   - Rename child driver [max77693-flash => max77693-led]; max77693
   - Error handling fixes; intel_soc_pmic
   - GPIO tweaking; intel_soc_pmic
   - Remove non-DT code; vexpress-sysreg, tc3589x
   - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr,
                                rtc-s5m, sec-core, max77693, menelaus,
                                wm5102-tables
   - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693,
                     mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power,
                     lpc_ich, menelaus, twl6040
   - Update register/address values; rts5227, rts5249
   - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x,
                                        qcom-rpm, qcom-spmi-pmic
   - Couple of trivial core Kconfig fixups
   - Remove use of seq_printf return value; ab8500-debugfs
   - Remove __exit markups; menelaus, tps65010
   - Fix platform-device name collisions; mfd-core

  New drivers/supported devices:

   - Add support for wm8280/wm8281 into arizona
   - Add support for COMe-cBL6 into kempld-core
   - Add support for rts524a and rts525a into rts5249
   - Add support for ipq8064 into qcom_rpm
   - Add support for extcon into axp20x
   - New MediaTek MT6397 PMIC driver
   - New Maxim MAX77843 PMIC dirver
   - New Intel Quark X1000 I2C-GPIO driver
   - New Skyworks SKY81452 driver"

* tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: sec: Fix RTC alarm interrupt number on S2MPS11
  mfd: wm5102: Remove registers for output 3R from readable list
  mfd: tps65010: Remove incorrect __exit markups
  mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes
  mfd: axp20x: Add support for extcon cell
  mfd: lpc_ich: Sort IDs
  mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias
  mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's
  mfd: axp20x: Fix duplicate const for model names
  mfd: menelaus: Use macro for magic number
  mfd: menelaus: Drop support for SW controller VCORE
  mfd: menelaus: Delete omap_has_menelaus
  mfd: arizona: Correct type of gpio_defaults
  mfd: lpc_ich: Sort IDs
  mfd: Fix a typo in Kconfig
  mfd: qcom_rpm: Add support for IPQ8064
  mfd: devicetree: qcom_rpm: Document IPQ8064 resources
  mfd: core: Fix platform-device name collisions
  mfd: intel_quark_i2c_gpio: Don't crash if !DMI
  dt-bindings: Add vendor-prefix for X-Powers
  ...
2015-04-14 17:29:55 -07:00
Linus Torvalds 8de29a35dc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:

 - quite a few firmware fixes for RMI driver by Andrew Duggan

 - huion and uclogic drivers have been substantially overlaping in
   functionality laterly.  This redundancy is fixed by hid-huion driver
   being merged into hid-uclogic; work done by Benjamin Tissoires and
   Nikolai Kondrashov

 - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg

 - Some of the quirks, that got separated into individual drivers, have
   historically had EXPERT dependency.  As HID subsystem matured (as
   well as the individual drivers), this made less and less sense.  This
   dependency is now being removed by patch from Jean Delvare

 - Logitech lg4ff driver received a couple of improvements for mode
   switching, by Michal Malý

 - multitouch driver now supports clickpads, patches by Benjamin
   Tissoires and Seth Forshee

 - hid-sensor framework received a substantial update; namely support
   for Custom and Generic pages is being added; work done by Srinivas
   Pandruvada

 - wacom driver received substantial update; it now supports
   i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
   properly supported (Benjamin Tissoires), much improved battery
   reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)

 - small assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  HID: sensor: Update document for custom sensor
  HID: sensor: Custom and Generic sensor support
  HID: debug: fix error handling in hid_debug_events_read()
  Input - mt: Fix input_mt_get_slot_by_key
  HID: logitech-hidpp: fix error return code
  HID: wacom: Add support for Cintiq 13HD Touch
  HID: logitech-hidpp: add a module parameter to keep firmware gestures
  HID: usbhid: yet another mouse with ALWAYS_POLL
  HID: usbhid: more mice with ALWAYS_POLL
  HID: wacom: set stylus_in_proximity before checking touch_down
  HID: wacom: use wacom_wac_finger_count_touches to set touch_down
  HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
  HID: pidff: effect can't be NULL
  HID: add quirk for PIXART OEM mouse used by HP
  HID: add HP OEM mouse to quirk ALWAYS_POLL
  HID: wacom: ask for a in-prox report when it was missed
  HID: hid-sensor-hub: Fix sparse warning
  HID: hid-sensor-hub: fix attribute read for logical usage id
  HID: plantronics: fix Kconfig default
  HID: pidff: support more than one concurrent effect
  ...
2015-04-14 09:25:26 -07:00
Dmitry Torokhov 85a3685852 Merge branch 'next' into for-linus
Prepare first round of input updates for 4.1 merge window.
2015-04-14 08:51:33 -07:00
Jiri Kosina 05f6d02521 Merge branches 'for-4.0/upstream-fixes', 'for-4.1/genius', 'for-4.1/huion-uclogic-merge', 'for-4.1/i2c-hid', 'for-4.1/kconfig-drop-expert-dependency', 'for-4.1/logitech', 'for-4.1/multitouch', 'for-4.1/rmi', 'for-4.1/sony', 'for-4.1/upstream' and 'for-4.1/wacom' into for-linus 2015-04-13 23:41:15 +02:00
Hans de Goede 92bac83dd7 Input: alps - non interleaved V2 dualpoint has separate stick button bits
Non interleaved V2 dualpoint touchpad / stick combos have separate stick
button bits in the touchpad packets, if we do not check these then the
trackpoint buttons will not work when using the touchpad, and when pressed
when the user starts using the touchpad will report a release event even
though the button is still pressed.

This commit fixes this by checking the separate bits, note that we simply
combine the buttons, since the hardware does the same when using the touchpad
buttons with the trackpoint, so we do not have enough information to properly
separate them.

Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-12 15:44:15 -07:00
Hans de Goede 6bcca19f5d Input: alps - fix touchpad buttons getting stuck when used with trackpoint
When the left touchpad button gets pressed, and then the trackpoint is
moved, and then the button is released, the following happens:

1) touchpad packet is received, touchpad evdev node reports BTN_LEFT 1

2) pointing stick packet is received, the hw will report a BTN_LEFT 1 in
   this packet because when the trackstick is active it communicates the
   combined touchpad + pointing stick buttons in the trackstick packet,
   since alps_report_bare_ps2_packet passes NULL (*) for the dev2 parameter
   to alps_report_buttons the combining is not detected and the
   pointing stick evdev node will also report BTN_LEFT 1

3) on release of the button a pointing stick packet with BTN_LEFT 0 is
   received and the pointing stick evdev node will report BTN_LEFT 0

Note how because of the passing as NULL for dev2 the touchpad evdev node
will never send BTN_LEFT 0 in this scenario leading to a stuck mouse button.

This is a regression in 4.0 introduced by commit 04aae283ba
("Input: ALPS - do not mix trackstick and external PS/2 mouse data")

This commit fixes this by passing in the touchpad evdev as dev2 parameter
when calling alps_report_buttons for the pointingstick on alps v2 devices,
so that alps_report_buttons correctly detect that we're already reporting
the button as pressed via the touchpad evdev node, and will also send the
release event there.

Cc: stable@vger.kernel.org # 4.0
Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-12 15:39:41 -07:00
Dmitry Torokhov 8b8a518ef1 Input: atkbd - document "no new force-release quirks" policy
To save people some time let's document that we do not want new quirks for
"force-release" keys in the kernel and that they should patch userspace
(udev) instead.

Suggested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-11 00:03:08 -07:00
Fengguang Wu 07f19e3db8 Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-11 00:02:46 -07:00
Masaki Ota 8d289842c8 Input: ALPS - V7 devices can report 5-finger taps
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07 08:47:43 -07:00
Masaki Ota 3db5b9f782 Input: ALPS - add support for SS4 touchpad devices
This change adds support for SS4 touchpad devices as ALPS_PROTO_V8
protocol.  They are real multi-touch devices and can be found in TOSHIBA
Tecra C50.

Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07 08:47:42 -07:00
Masaki Ota 8eccd39340 Input: ALPS - refactor alps_set_abs_params_mt()
In preparation for adding support for SS4 touchpads, let's split
alps_set_abs_params_mt into common, v7-specific, and other protocols
portions.

Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07 08:47:42 -07:00
Dmitry Torokhov 5f63e885ac Linux 4.0-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVIws/AAoJEHm+PkMAQRiGwEcH/1GCBqrBzXaKwDdCPMRcYVUb
 MYkXmGkCGRYWe5MXI8QNAaa/CdG6mAFMHWN6CaMMpLTxnM1m87uBg01fQMsh73BO
 mRVLKE/soiJDnR1gYzBBDBYV/AUvytN5PhgeNaA95YIJvU3T1f3iTnV8vs30Dp0L
 YpxSqwr3C0k7C9IE0VcgfzvWJPCnQ9IWHuX3jn5s1XjGKVNbBYHMt6FusHdyXMfT
 dp8ksuGHwm30mTFI5xJpKOrRzfi+P5EsEUrsnFRPRM/iFTVrM5R7eaUhsRZb2+Wo
 YApnbYhUYz7om1AuQ+UZ/+S6y7ZLlGWegI1lWI754GIsczG5vPHEYhhgkzMhTsc=
 =kR1V
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc7' into next

Sync up with Linux 4.0-rc7 to bring in ALPS changes.
2015-04-07 08:46:23 -07:00
Benjamin Tissoires c627589282 Input - mt: Fix input_mt_get_slot_by_key
The case occurred recently with a touchscreen using twice a slot during a
single EV_SYN event:

E: 0.288415 0000 0000 0000      # ------------ SYN_REPORT (0) ----------
E: 0.296207 0003 002f 0000      # EV_ABS / ABS_MT_SLOT          0
E: 0.296207 0003 0039 -001      # EV_ABS / ABS_MT_TRACKING_ID   -1
E: 0.296207 0003 002f 0001      # EV_ABS / ABS_MT_SLOT          1
E: 0.296207 0003 0035 0908      # EV_ABS / ABS_MT_POSITION_X    908
E: 0.296207 0003 0036 1062      # EV_ABS / ABS_MT_POSITION_Y    1062
E: 0.296207 0003 002f 0000      # EV_ABS / ABS_MT_SLOT          0
E: 0.296207 0003 0039 8787      # EV_ABS / ABS_MT_TRACKING_ID   8787
E: 0.296207 0003 0035 1566      # EV_ABS / ABS_MT_POSITION_X    1566
E: 0.296207 0003 0036 0861      # EV_ABS / ABS_MT_POSITION_Y    861
E: 0.296207 0003 0000 0908      # EV_ABS / ABS_X                908
E: 0.296207 0003 0001 1062      # EV_ABS / ABS_Y                1062
E: 0.296207 0000 0000 0000      # ------------ SYN_REPORT (0) ----------

This occurred because while having already slots 0 and 1 assigned, the
touchscreen sent:

0.293377 Tip Switch: 0 | Contact Id: 0 | X:  539 | Y: 1960 | Contact Count: 3
0.294783 Tip Switch: 1 | Contact Id: 1 | X:  908 | Y: 1062 | Contact Count: 0
0.296187 Tip Switch: 1 | Contact Id: 2 | X: 1566 | Y:  861 | Contact Count: 0

Slot 0 is released correclty, but when we look for Contact ID 2, the slot
0 is then picked up again because it is marked as inactive (trackingID < 0).

This is wrong, and we should not reuse a slot in the same frame.
The test should also check for input_mt_is_used().

In addition, we need to initialize mt->frame to an other value than 0.
With mt->frame being 0, all slots are tags as currently used, and so
input_mt_get_slot_by_key() would return -1 for all requests.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88903

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-07 15:16:36 +02:00
Ulrik De Bie bd884149ac Input: elantech - fix absolute mode setting on some ASUS laptops
On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c

Cc: stable@vger.kernel.org
Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 15:39:07 -07:00
Linus Torvalds 9e441639d1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem - two more tweaks for ALPS driver to
  work out kinks after splitting the touchpad, trackstick, and potential
  external PS/2 mouse into separate input devices.

  Changes to support ALPS SS4 devices (protocol V8) will be coming in
  4.1..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - document stick behavior for protocol V2
  Input: alps - report V2 Dualpoint Stick events via the right evdev node
  Input: alps - report interleaved bare PS/2 packets via dev3
2015-04-06 14:10:08 -07:00
Sjoerd Simons b6d2d3289f Input: atmel_mxt_ts - split out touchpad initialisation logic
If the "linux,gpio-keymap" DT property is defined, the T19 keys are
configured and the device is setup as a touchpad rather than a touchscreen.
The logic is part of the input device initialization routine but it can be
factored out to its own function to simplify the former.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 13:37:32 -07:00
Nick Dyer b23157dc74 Input: atmel_mxt_ts - implement support for T100 touch object
Add support for the new T100 object which replaces the previous T9
multitouch touchscreen object in recent maXTouch devices. T100 provides
improved reporting with selectable auxiliary information, and a type field
for hover/stylus/glove reporting.

The hovering finger support was based on Chung-Yih's work in the ChromiumOS
downstream kernel:

https://chromium-review.googlesource.com/#/c/219280/

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
[javier: Factor out T9 and T100 init functions and rework hover support]
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 13:37:31 -07:00
Tomeu Vizoso ef30a40646 Input: cros_ec_keyb - fix clearing keyboard state on wakeup
As the comment right before explains, the keyboard state is to be cleared
only if the EC wasn't a wakeup source in the last suspend.

Without this commit, there's an unneeded delay when resuming from suspend
and we also lose the key that was pressed while suspended.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 10:01:20 -07:00
Michael S. Tsirkin a54aecbd3a Input: gscps2 - drop pci_ids dependency
This driver does not use any PCI IDs, don't include the pci_ids.h header.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:38:08 -07:00
Benjamin Tissoires 63c4fda3c0 Input: synaptics - allocate 3 slots to keep stability in image sensors
When slowly dropping 1, 2 and then 3 fingers on an image sensor touchpad,
we can see that the first finger gets reassigned a new slot while it did
not move. This is due to the kernel tracking algorithm which can not assign
correctly the 3 touches, being out of slots.

Declaring that we support 3 slots allows to actually forward:
slot 0 -> down, slot 1 -> up, slot 2 -> down

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrik Rydberg <rydberg@bitmath.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:38:07 -07:00
Benjamin Tissoires 58fd9af6e1 Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots""
This reverts commit 09d042a2eb ("Revert "Input: synaptics - use dmax in
input_mt_assign_slots"")

Now that balanced slots assignments seem to be fixed, let's re-enable the
use in synaptics.c and wait for users to complain if there are still
problems.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrik Rydberg <rydberg@bitmath.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:38:07 -07:00
Benjamin Tissoires 73e8a8e777 Input: MT - make slot assignment work for overcovered solutions
The recent inclusion of a deassignment cost in the slot assignment
algorithm did not properly account for the corner cases where the
solutions are overcovered. This change makes sure the resulting
assignment is unique, allocating new slots when necessary.

Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:37:33 -07:00
Hans de Goede e3a79212ea Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.

Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.

This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-05 11:48:35 -07:00
Hans de Goede 59c30afbd3 Input: alps - report interleaved bare PS/2 packets via dev3
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.

This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.

This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-05 11:48:34 -07:00
Linus Walleij 61125591e1 mfd: tc3589x: enforce device-tree only mode
All systems using the TC3589x multifunction expander uses
devicetree, so don't clutter the place with a lot of
and assume it is there.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-03 17:08:59 -07:00
Linus Walleij 8b6f53c2f6 Input: tc3589x - localize platform data
This driver can only get its platform data from the device tree, and all
platforms using it do that. Localize the platform data for the keypad. A
later patch will enforce the device tree / OF dependence.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-03 17:08:59 -07:00
Linus Torvalds 1cced5015b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
 "A fix for ALPS driver for issue introduced in the latest update and a
  tweak for yet another Lenovo box in Synaptics.

  There will be more ALPS tweaks coming.."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: define INPUT_PROP_ACCELEROMETER behavior
  Input: synaptics - fix min-max quirk value for E440
  Input: synaptics - add quirk for Thinkpad E440
  Input: ALPS - fix max coordinates for v5 and v7 protocols
  Input: add MT_TOOL_PALM
2015-04-03 14:58:48 -07:00
Filip Ayazi 85734b1a5d Input: synaptics - fix min-max quirk value for E440
Commit 98dc070373 ("Input: synaptics - add quirk for Thinkpad E440") had
a typo in ymax, this changes the value to the one reported by
touchpad-edge-detector and mentioned in the commit.

Signed-off-by: Filip Ayazi <filipayazi@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-31 14:46:39 -07:00
Aaron Sierra bbdb38a22e Input: tsc2007 - Convert msecs to jiffies only once
Eliminate redundant calculations by performing millisecond to jiffy
calculations once during driver initialization.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-31 14:41:33 -07:00
Linus Walleij 1422731dbc mfd: tc3589x: Enforce device-tree only mode
All systems using the TC3589x multifunction expander uses
devicetree, so don't clutter the place with a lot of
and assume it is there.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26 14:20:17 +00:00
Maxime Ripard 709583e894 Input: edt-ft5x06 - remove EV_SYN event report
input_register_device already sets the EV_SYN event since all devices can
generate them.

Remove the redundant affectation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:01:11 -07:00
Maxime Ripard 2c00559884 Input: edt-ft5x06 - allow to setting the maximum axes value through the DT
Currently the driver relies on some obscure and undocumented register to set
the maximum axis value.

The reported value is way too high to be meaningful, which confuses some
userspace tools like QT's evdevtouch plugin which try to scale the reported
events to the maximum values.

Use the values from the DT to set meaningful values.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:00:50 -07:00
Maxime Ripard 0a363a3809 Input: of_touchscreen - register multitouch axes
So far, the DT parsing code was only setting up the regular input axes,
completely ignoring their multitouch counter parts.

Fill them with the same parameters than the regular axes.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:00:40 -07:00
Maxime Ripard 3eea8b5d68 Input: of_touchscreen - rework the DT parsing function
The DT parsing function currently duplicates a lot of the code to parse the
touchscreen DT properties. In order to ease further additions to this
parsing routine, rework it slightly to create new helper functions.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:00:39 -07:00
Dmitry Torokhov 5037a17966 Input: mma8450 - convert to using managed resources
This simplifies error handling and device removal code. Also let's
get rid of setting driver's owner since i2c core does it for us.

Tested-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 11:35:06 -07:00
Hans de Goede a93ad65d37 Input: add support for ChipOne icn8318 based touchscreens
The ChipOne icn8318 is an i2c capacitive touchscreen controller typically
used in cheap android tablets, this commit adds a driver for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 11:27:52 -07:00
Lars Poeschel dbea4032f8 Input: usbtouchscreen - add new model from IRTOUCHSYSTEMS
This adds support for another model of IRTOUCH SYSTEMS Co.,LtD infrared
touchscreens. The USB vendorID/deviceID is 6615/0012. It is also sold
under the label "Elektrosil".

The datasheet states that coordinates for x and y are in the range from
0 to 32767.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 09:29:34 -07:00
Jonathan Richardson d5ae685f15 Input: add Broadcom iProc touchscreen driver
Add initial version of the Broadcom touchscreen driver.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 11:04:48 -07:00
Ramiro Morales 98dc070373 Input: synaptics - add quirk for Thinkpad E440
Its ClickPad shares PNP ID "LEN2006" with the one in model E540 which is
already handled by the driver (both are Haswell iterations of the Edge
line, launched in 2014) but the dimensions it reports are different:

  $ sudo ./touchpad-edge-detector /dev/input/event3
  Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event3
  Move one finger around the touchpad to detect the actual edges
  Kernel says: x [1472..5044], y [1408..3398]
  Touchpad sends: x [1024..5045], y [2457..4832] /^C

Fortunately we can use the board ID, which is also different, to
distinguish among them.

  $ dmesg | grep -i synaptics
  psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
      caps: 0xd001a3/0x940300/0x127c00, board id: 2691, fw id: 1494646
  psmouse serio1: synaptics: serio: Synaptics pass-through port at
      isa0060/serio1/input0
  input: SynPS/2 Synaptics TouchPad as
      /devices/platform/i8042/serio1/input/input4

Board ID in E540 is 2722:

  psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
      caps: 0xd001a3/0x940300/0x127c00, board id: 2722, fw id: 1484859

(from https://launchpadlibrarian.net/179702965/BootDmesg.txt)

Signed-off-by: Ramiro Morales <cramm0@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 10:35:42 -07:00
Dmitry Torokhov 188933ac13 Linux 4.0-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVD1VGAAoJEHm+PkMAQRiG7yoH/juKOQ1zbxi5M+mleDEEJtA0
 RxQSojqEMWIKrWi8PNZxjENn1OZB6XOLIXOhlyAZBrmgsjO34p1DyXlZMznr/R8W
 kQ2Xxs061hRtB3OuruMIqOApUrjuqsaCwgbgUS1qWmqZcoyZN4oELyZMP6OOlqv5
 UUBZm8MfyXGyxrCcg39mjct3VEOhiuEcvL6SUxOC380CdSVAnyqHFPcz0JVqMUn9
 9RUBs0T9cMdhb0mZ2bfXzt6AKArj63G2nXOum+VzFcvspSm2U+MPIDCuoE+ZbTPS
 jqIAgG0rj1ezRyb5oeJrvlU0Yy3u/cXoMPs9+kORvpladooYNLti8ovh6qllm0I=
 =d/ye
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc5' into next

Merge with the latest upstream to synchronize Synaptics changes
and bring in new infrastructure pieces.

Conflicts:
	drivers/input/mouse/synaptics.c
2015-03-23 09:18:27 -07:00
Dmitry Torokhov c164c147c9 Input: ALPS - fix max coordinates for v5 and v7 protocols
Commit 3296f71cd2 ("Input: ALPS - consolidate
setting protocol parameters") inadvertently moved call to
alps_dolphin_get_device_area() from v5 to v7 protocol, causing both
protocols report incorrect maximum values for X and Y axes which resulted
in crash in Synaptics X driver.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94801
Reported-by: Santiago Gala <sgala@apache.org>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 09:14:25 -07:00
Jens Thiele 4ed0e032c3 Input: sun4i-ts - allow controlling filter and sensitivity via DT
This commit introduces two new optional device-tree properties:
"tp-sensitive-adjust": adjust sensitivity of pen down detection
"filter-type": select median and averaging filter

The previous fixed defaults, didn't work well for the Olimex
A13-LCD10TS (I have).

Signed-off-by: Jens Thiele <karme@karme.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 09:11:11 -07:00
Courtney Cavin 68c581d5e7 Input: add Qualcomm PM8941 power key driver
Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-20 21:59:55 -07:00
Brian K. Turner 7e174702c8 Input: lifebook - fix tabbing issue
This change fixes a style issue where spaces where used instead of tabs.

Signed-off-by: Brian K. Turner <turnerbk84@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-20 09:45:51 -07:00
Linus Torvalds b314acaccd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "An update to Synaptics driver that makes it usable with the 2015
  lineup from Lenovo"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics - use dmax in input_mt_assign_slots"
  Input: synaptics - remove X250 from the topbuttonpad list
  Input: synaptics - remove X1 Carbon 3rd gen from the topbuttonpad list
  Input: synaptics - re-route tracksticks buttons on the Lenovo 2015 series
  Input: synaptics - remove TOPBUTTONPAD property for Lenovos 2015
  Input: synaptics - retrieve the extended capabilities in query $10
  Input: synaptics - do not retrieve the board id on old firmwares
  Input: synaptics - handle spurious release of trackstick buttons
  Input: synaptics - fix middle button on Lenovo 2015 products
  Input: synaptics - skip quirks when post-2013 dimensions
  Input: synaptics - support min/max board id in min_max_pnpid_table
  Input: synaptics - remove obsolete min/max quirk for X240
  Input: synaptics - query min dimensions for fw v8.1
  Input: synaptics - log queried and quirked dimension values
  Input: synaptics - split synaptics_resolution(), query first
2015-03-19 16:43:10 -07:00
Nicolas Iooss 61c797d52d Input: elan_i2c - fix typo in include header guard
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Fixes: 6696777c65 ("Input: add driver for Elan I2C/SMbus touchpad")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-19 12:16:18 -07:00
Fabian Frederick 245165de98 Input: constify of_device_id arrays
of_device_id is always used as const argument (See driver.of_match_table
and open firmware functions).

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-19 12:16:18 -07:00
Dmitry Torokhov 09d042a2eb Revert "Input: synaptics - use dmax in input_mt_assign_slots"
This reverts commit 6ab17a8484 since it,
according to Benjamin, causes issues with slot assignment:

E: 15.669119 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 15.954242 0003 002f 0000     # EV_ABS / ABS_MT_SLOT          0
E: 15.954242 0003 0039 0505     # EV_ABS / ABS_MT_TRACKING_ID   505
E: 15.954242 0003 0035 3851     # EV_ABS / ABS_MT_POSITION_X    3851
E: 15.954242 0003 0036 4076     # EV_ABS / ABS_MT_POSITION_Y    4076
E: 15.954242 0003 003a 0034     # EV_ABS / ABS_MT_PRESSURE      34
E: 15.954242 0001 014a 0001     # EV_KEY / BTN_TOUCH            1
E: 15.954242 0003 0000 3851     # EV_ABS / ABS_X                3851
E: 15.954242 0003 0001 4076     # EV_ABS / ABS_Y                4076
E: 15.954242 0003 0018 0034     # EV_ABS / ABS_PRESSURE         34
E: 15.954242 0001 0145 0001     # EV_KEY / BTN_TOOL_FINGER      1
E: 15.954242 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
... (bunch of regular events)...
E: 16.020614 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 16.043601 0003 0035 3873     # EV_ABS / ABS_MT_POSITION_X    3873
E: 16.043601 0003 0036 3903     # EV_ABS / ABS_MT_POSITION_Y    3903
E: 16.043601 0003 003a 0050     # EV_ABS / ABS_MT_PRESSURE      50
E: 16.043601 0003 0035 3032     # EV_ABS / ABS_MT_POSITION_X    3032
E: 16.043601 0003 0036 3832     # EV_ABS / ABS_MT_POSITION_Y    3832
E: 16.043601 0003 003a 0044     # EV_ABS / ABS_MT_PRESSURE      44
E: 16.043601 0003 0000 3032     # EV_ABS / ABS_X                3032
E: 16.043601 0003 0001 3832     # EV_ABS / ABS_Y                3832
E: 16.043601 0003 0018 0044     # EV_ABS / ABS_PRESSURE         44
E: 16.043601 0001 0145 0000     # EV_KEY / BTN_TOOL_FINGER      0
E: 16.043601 0001 014d 0001     # EV_KEY / BTN_TOOL_DOUBLETAP   1
E: 16.043601 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 16.068837 0003 002f 0001     # EV_ABS / ABS_MT_SLOT          1
E: 16.068837 0003 0039 0506     # EV_ABS / ABS_MT_TRACKING_ID   506
E: 16.068837 0003 0035 3912     # EV_ABS / ABS_MT_POSITION_X    3912
E: 16.068837 0003 0036 3743     # EV_ABS / ABS_MT_POSITION_Y    3743
E: 16.068837 0003 003a 0056     # EV_ABS / ABS_MT_PRESSURE      56
E: 16.068837 0003 002f 0000     # EV_ABS / ABS_MT_SLOT          0
E: 16.068837 0003 0035 3026     # EV_ABS / ABS_MT_POSITION_X    3026
E: 16.068837 0003 0036 3708     # EV_ABS / ABS_MT_POSITION_Y    3708
E: 16.068837 0003 003a 0052     # EV_ABS / ABS_MT_PRESSURE      52
E: 16.068837 0003 0000 3026     # EV_ABS / ABS_X                3026
E: 16.068837 0003 0001 3708     # EV_ABS / ABS_Y                3708
E: 16.068837 0003 0018 0052     # EV_ABS / ABS_PRESSURE         52
E: 16.068837 0000 0000 0000     # ------------ SYN_REPORT (0) ----------

Slot 0 and 1 gets inverted in the second report above, which
introduces a cursor jump. The problem is that this cursor jump is
often enough to leave the current widget, and X sends the
scrolling events to whoever is now under the cursor.

Reported-by: Benjamin Tissoires <btissoir@redhat.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
2015-03-16 09:17:16 -07:00
Dmitry Torokhov 6067fe5e0b Merge branch 'synaptics' into for-linus
Bring in changes needed to properly handle Lenovo 2015 lineup.
2015-03-16 09:12:56 -07:00