[ Upstream commit 0b8eb2ee9d ]
The scanning through subchannels during the time of an event could
take significant amount of time in case of platforms with lots of
known subchannels. This might result in higher scheduling latencies
for other tasks especially on systems with a single CPU. Add
cond_resched() call, as the loop in slow_eval_known_fn() can be
executed for a longer duration.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75e82bec6b ]
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq().
If the subsequent qdio_establish_thinint() fails, we miss to put the
DSCI again. Thus the DSCI isn't available for re-use. Given enough of
such errors, we could end up with having only the shared DSCI available.
Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with
such an error internally.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05ce3e53f3 ]
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: fa1a8c23eb ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bc55eaeb8 ]
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
Message-Id: <20200327124503.9794-3-cohuck@redhat.com>
Fixes: 63f1934d56 ("vfio: ccw: basic implementation for vfio_ccw driver")
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9091ffd6a ]
As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.
Handle this properly in the code that actually builds the SL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd4b3c83b9 ]
The max data count (mdc) is an unsigned 16-bit integer value as per AR
documentation and is received via ccw_device_get_mdc() for a specific
path mask from the CIO layer. The function itself also always returns a
positive mdc value or 0 in case mdc isn't supported or couldn't be
determined.
Though, the comment for this function describes a negative return value
to indicate failures.
As a result, the DASD device driver interprets the return value of
ccw_device_get_mdc() incorrectly. The error case is essentially a dead
code path.
To fix this behaviour, check explicitly for a return value of 0 and
change the comment for ccw_device_get_mdc() accordingly.
This fix merely enables the error code path in the DASD functions
get_fcx_max_data() and verify_fcx_max_data(). The actual functionality
stays the same and is still correct.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 37db8985b2 ("s390/cio: add basic protected virtualization
support") breaks virtio-ccw devices with VIRTIO_F_IOMMU_PLATFORM for non
Protected Virtualization (PV) guests. The problem is that the dma_mask
of the ccw device, which is used by virtio core, gets changed from 64 to
31 bit, because some of the DMA allocations do require 31 bit
addressable memory. For PV the only drawback is that some of the virtio
structures must end up in ZONE_DMA because we have the bounce the
buffers mapped via DMA API anyway.
But for non PV guests we have a problem: because of the 31 bit mask
guests bigger than 2G are likely to try bouncing buffers. The swiotlb
however is only initialized for PV guests, because we don't want to
bounce anything for non PV guests. The first such map kills the guest.
Since the DMA API won't allow us to specify for each allocation whether
we need memory from ZONE_DMA (31 bit addressable) or any DMA capable
memory will do, let us use coherent_dma_mask (which is used for
allocations) to force allocating form ZONE_DMA while changing dma_mask
to DMA_BIT_MASK(64) so that at least the streaming API will regard
the whole memory DMA capable.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Fixes: 37db8985b2 ("s390/cio: add basic protected virtualization support")
Link: https://lore.kernel.org/lkml/20190930153803.7958-1-pasic@linux.ibm.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The QIB parm area is 128 bytes long. Current code consistently misuses
an _entirely unrelated_ QDIO constant, merely because it has the same
value. Stop doing so.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Fix 3 kasan findings.
- Add PERF_EVENT_IOC_PERIOD ioctl support.
- Add Crypto Express7S support and extend sysfs attributes for pkey.
- Minor common I/O layer documentation corrections.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl2Mj18ACgkQjYWKoQLX
FBiiowf/RnU7K+VACpZ9D1SAELvkz6z3aht4Xr22gJtzy1nHsMz2dILNPxrt1NgT
56gO8iYprQ7Mjl2/D6Mk2HbgI5cKVcyEr8hPvRA2NsUaVNOqH6HWGjn0NV4LRWGm
rGXkFvWz0639qSGiQ4KgRdJSFfMQiKWstKdKwgWwnnwmxpa7QC7P42SA9YBO3h9f
17y9JqLN1w9iKgvnGdeJlmPebi15I9jIMHaU+ebGd6EJ4AxNWOED7s1iIhAgjtNZ
jbsVzVu8luM0QNSBcK5h+4YDaYflt3zpuQg+DJcLvokVNGGaTi/RBzeJ+L81Fpgh
5HAPlaIV/xkgnqE9bG9Tr6L3NyRgug==
=Wc/P
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix three kasan findings
- Add PERF_EVENT_IOC_PERIOD ioctl support
- Add Crypto Express7S support and extend sysfs attributes for pkey
- Minor common I/O layer documentation corrections
* tag 's390-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: exclude subchannels with no parent from pseudo check
s390/cio: avoid calling strlen on null pointer
s390/topology: avoid firing events before kobjs are created
s390/cpumf: Remove mixed white space
s390/cpum_sf: Support ioctl PERF_EVENT_IOC_PERIOD
s390/zcrypt: CEX7S exploitation support
s390/cio: fix intparm documentation
s390/pkey: Add sysfs attributes to emit AES CIPHER key blobs
ccw console is created early in start_kernel and used before css is
initialized or ccw console subchannel is registered. Until then console
subchannel does not have a parent. For that reason assume subchannels
with no parent are not pseudo subchannels. This fixes the following
kasan finding:
BUG: KASAN: global-out-of-bounds in sch_is_pseudo_sch+0x8e/0x98
Read of size 8 at addr 00000000000005e8 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc8-07370-g6ac43dd12538 #2
Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
Call Trace:
([<000000000012cd76>] show_stack+0x14e/0x1e0)
[<0000000001f7fb44>] dump_stack+0x1a4/0x1f8
[<00000000007d7afc>] print_address_description+0x64/0x3c8
[<00000000007d75f6>] __kasan_report+0x14e/0x180
[<00000000018a2986>] sch_is_pseudo_sch+0x8e/0x98
[<000000000189b950>] cio_enable_subchannel+0x1d0/0x510
[<00000000018cac7c>] ccw_device_recognition+0x12c/0x188
[<0000000002ceb1a8>] ccw_device_enable_console+0x138/0x340
[<0000000002cf1cbe>] con3215_init+0x25e/0x300
[<0000000002c8770a>] console_init+0x68a/0x9b8
[<0000000002c6a3d6>] start_kernel+0x4fe/0x728
[<0000000000100070>] startup_continue+0x70/0xd0
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix the following kasan finding:
BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140
Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561
CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000231b3db7e>] show_stack+0x14e/0x1a8)
[<0000000233826410>] dump_stack+0x1d0/0x218
[<000000023216fac4>] print_address_description+0x64/0x380
[<000000023216f5a8>] __kasan_report+0x138/0x168
[<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140
[<00000002332b618a>] group_store+0x3a/0x50
[<00000002323ac706>] kernfs_fop_write+0x246/0x3b8
[<00000002321d409a>] vfs_write+0x132/0x450
[<00000002321d47da>] ksys_write+0x122/0x208
[<0000000233877102>] system_call+0x2a6/0x2c8
Triggered by:
openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group",
O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16
write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26
The problem is that __get_next_id in ccwgroup_create_dev might set "buf"
buffer pointer to NULL and explicit check for that is required.
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The common I/O layer is maintaining an "intparm" inspired by
the hardware intparm for driver usage. This "intparm" is not
only applicaple for ssch, but also for hsch/csch. The kerneldoc
states that it is only updated for hsch/csch if no prior request
is pending; however, this is not what the code does (whether
that would actually desireable is a different issue.)
Let's at least fix the kerneldoc for now.
Fixes: b2ffd8e9a7 ("[S390] cio: Add docbook comments.")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
- Add support for IBM z15 machines.
- Add SHA3 and CCA AES cipher key support in zcrypt and pkey refactoring.
- Move to arch_stack_walk infrastructure for the stack unwinder.
- Various kasan fixes and improvements.
- Various command line parsing fixes.
- Improve decompressor phase debuggability.
- Lift no bss usage restriction for the early code.
- Use refcount_t for reference counters for couple of places in
mm code.
- Logging improvements and return code fix in vfio-ccw code.
- Couple of zpci fixes and minor refactoring.
- Remove some outdated documentation.
- Fix secure boot detection.
- Other various minor code clean ups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl1/pRoACgkQjYWKoQLX
FBjxLQf/Y1nlmoc8URLqaqfNTczIvUzdfXuahI7L75RoIIiqHtcHBrVwauSr7Lma
XVRzK/+6q0UPISrOIZEEtQKsMMM7rGuUv/+XTyrOB/Tsc31kN2EIRXltfXI/lkb8
BZdgch4Xs2rOD7y6TvqpYJsXYXsnLMWwCk8V+48V/pok4sEgMDgh0bTQRHPHYmZ6
1cv8ZQ0AeuVxC6ChM30LhajGRPkYd8RQ82K7fU7jxT0Tjzu66SyrW3pTwA5empBD
RI2yBZJ8EXwJyTCpvN8NKiBgihDs9oUZl61Dyq3j64Mb1OuNUhxXA/8jmtnGn0ok
O9vtImCWzExhjSMkvotuhHEC05nEEQ==
=LCgE
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for IBM z15 machines.
- Add SHA3 and CCA AES cipher key support in zcrypt and pkey
refactoring.
- Move to arch_stack_walk infrastructure for the stack unwinder.
- Various kasan fixes and improvements.
- Various command line parsing fixes.
- Improve decompressor phase debuggability.
- Lift no bss usage restriction for the early code.
- Use refcount_t for reference counters for couple of places in mm
code.
- Logging improvements and return code fix in vfio-ccw code.
- Couple of zpci fixes and minor refactoring.
- Remove some outdated documentation.
- Fix secure boot detection.
- Other various minor code clean ups.
* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390: remove pointless drivers-y in drivers/s390/Makefile
s390/cpum_sf: Fix line length and format string
s390/pci: fix MSI message data
s390: add support for IBM z15 machines
s390/crypto: Support for SHA3 via CPACF (MSA6)
s390/startup: add pgm check info printing
s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
vfio-ccw: fix error return code in vfio_ccw_sch_init()
s390: vfio-ap: fix warning reset not completed
s390/base: remove unused s390_base_mcck_handler
s390/sclp: Fix bit checked for has_sipl
s390/zcrypt: fix wrong handling of cca cipher keygenflags
s390/kasan: add kdump support
s390/setup: avoid using strncmp with hardcoded length
s390/sclp: avoid using strncmp with hardcoded length
s390/module: avoid using strncmp with hardcoded length
s390/pci: avoid using strncmp with hardcoded length
s390/kaslr: reserve memory for kasan usage
s390/mem_detect: provide single get_mem_detect_end
s390/cmma: reuse kstrtobool for option value parsing
...
Fix to return negative error code -ENOMEM from the memory alloc failed
error handling case instead of 0, as done elsewhere in this function.
Fixes: 60e05d1cf0 ("vfio-ccw: add some logging")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link https://lore.kernel.org/kvm/20190904083315.105600-1-weiyongjun1@huawei.com/
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If a driver wants to use the new Output Queue poll code, then the qdio
layer must disable its internal Queue scanning. Let the driver select
this mode by passing a special scan_threshold of 0.
As the scan_threshold is the same for all Output Queues, also move it
into the main qdio_irq struct. This allows for fast opt-out checking, a
driver is expected to operate either _all_ or none of its Output Queues
in polling mode.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While commit d36deae750 ("qdio: extend API to allow polling") enhanced
the qdio layer so that drivers can poll their Input Queues, we don't
have the corresponding infrastructure for Output Queues yet.
Factor out a helper that scans a single QDIO Queue, so that qeth can
implement TX NAPI on top of it.
While doing so, remove the duplicated tracking of the next-to-scan index
(q->first_to_check vs q->first_to_kick) in this code path.
qdio_handle_aobs() needs to move slightly upwards in the code hierarchy,
so that it's still called from the polling path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Usually, the common I/O layer logs various things into the s390
cio debug feature, which has been very helpful in the past when
looking at crash dumps. As vfio-ccw devices unbind from the
standard I/O subchannel driver, we lose some information there.
Let's introduce some vfio-ccw debug features and log some things
there. (Unfortunately we cannot reuse the cio debug feature from
a module.)
Message-Id: <20190816151505.9853-2-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add a generic helper to match any/all devices. Using this
introduce new wrappers {bus/driver/class}_find_next_device().
Cc: Elie Morisse <syniurge@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI
Link: https://lore.kernel.org/r/20190723221838.12024-7-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to match the device name for device lookup. Also
reuse this generic exported helper for the existing bus_find_device_by_name().
and add similar variants for driver/class.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-leds@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wpan@vger.kernel.org
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190723221838.12024-2-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since vfio_ccw_async_region_ops is not exported and has no reason to be
globally visible make it static to avoid the following sparse warning:
drivers/s390/cio/vfio_ccw_async.c:73:30: warning: symbol 'vfio_ccw_async_region_ops' was not declared. Should it be static?
Fixes: d5afd5d135 ("vfio-ccw: add handling for async channel instructions")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The IQD mcast queue doesn't support QAOB mode, so skip the
qdio_enable_async_operation() setup call for this queue. This avoids
the allocation of an unneeded QAOB pointer array, and sets up q->use_cq
properly so that drivers are prohibited from using QAOBs for mcast
traffic.
Take this opportunity to streamline the q->use_cq and aob != 0 checks.
The path to qdio_siga_output() is straight-forward, we don't need to
worry about being called with bad operands.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.
Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
There is a small window where it's possible that we could be working
on an interrupt (queued in the workqueue) and setting up a channel
program (i.e allocating memory, pinning pages, translating address).
This can lead to allocating and freeing the channel program at the
same time and can cause memory corruption.
Let's not call cp_free if we are currently processing a channel program.
The only way we know for sure that we don't have a thread setting
up a channel program is when the state is set to VFIO_CCW_STATE_CP_PENDING.
Fixes: d5afd5d135 ("vfio-ccw: add handling for async channel instructions")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <62e87bf67b38dc8d5760586e7c96d400db854ebe.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We don't set cp->initialized to true so calling cp_free
will just return and not do anything.
Also fix a memory leak where we fail to free a ccwchain
on an error.
Fixes: 812271b910 ("s390/cio: Squash cp_free() and cp_unpin_free()")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <3173c4216f4555d9765eb6e4922534982bc820e4.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The comment is misleading because it tells us that
we should set orb.cmd.c64 before calling ccwchain_calc_length,
otherwise the function ccwchain_calc_length would return an
error. This is not completely accurate.
We want to allow an orb without cmd.c64, and this is fine
as long as the channel program does not use IDALs. But we do
want to reject any channel program that uses IDALs and does
not set the flag, which is what we do in ccwchain_calc_length.
After we have done the ccw processing, we need to set cmd.c64,
as we use IDALs for all translated channel programs.
Also for better code readability let's move the setting of
cmd.c64 within the non error path.
Fixes: fb9e7880af ("vfio: ccw: push down unsupported IDA check")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <f68636106aef0faeb6ce9712584d102d1b315ff8.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups. Because of this, there is going
to be some merge issues with your tree at the moment, I'll follow up
with the expected resolutions to make it easier for you.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups (will cause build warnings
with s390 and coresight drivers in your tree)
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse
easier due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of merge
issues that Stephen has been patient with me for. Other than the merge
issues, functionality is working properly in linux-next :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
LpRyb3zX29oChFaZkc5a
=XrEZ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
- Improve stop_machine wait logic: replace cpu_relax_yield call in generic
stop_machine function with a weak stop_machine_yield function. This is
overridden on s390, which yields the current cpu to the neighbouring cpu
after a couple of retries, instead of blindly giving up the cpu to the
hipervisor. This significantly improves stop_machine performance on s390 in
overcommitted scenarios.
This includes common code changes which have been Acked by Peter Zijlstra
and Thomas Gleixner.
- Improve jump label transformation speed: transform jump labels without
using stop_machine.
- Refactoring of the vfio-ccw cp handling, simplifying the code and
avoiding unneeded allocating/copying.
- Various vfio-ccw fixes (ccw translation, state machine).
- Add support for vfio-ap queue interrupt control in the guest.
This includes s390 kvm changes which have been Acked by Christian
Borntraeger.
- Add protected virtualization support for virtio-ccw.
- Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to remove some
code which most likely isn't working at all, besides that s390 didn't even
compile for !CONFIG_SMP.
- Support for special flagged EP11 CPRBs for zcrypt.
- Handle PCI devices with no support for new MIO instructions.
- Avoid KASAN false positives in reworked stack unwinder.
- Couple of fixes for the QDIO layer.
- Convert s390 specific documentation to ReST format.
- Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if hardware is
missing. This way our modules behave like most other modules and which is
also what systemd's systemd-modules-load.service expects.
- Replace defconfig with performance_defconfig, so there is one config file
less to maintain.
- Remove the SCLP call home device driver, which was never useful.
- Cleanups all over the place.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl0iEpcACgkQjYWKoQLX
FBgtZwf8DOJ6COUG91jKP0RSDlc2YvIMBxopQ38ql1lIsTj5t6DvJ2z3X5uct1wy
6mMiF01VuyD4V4UXbTJQrihzNx7D4dUh47s2sS+diGHxJyXacVxlmjS5k+6pLIUO
AyLvtCcoqDPPiThqnSTZFRm/TcfO/25fCG/IdjrFGj1MD09wHpUCh16tmRPTGFlC
BWZeilDT77fVXnh7Ggn3JB0mQay5PAw2ODOxELHTUBaLmYF8RJPPVKBPmXGl9P1W
84ESm2p+iALGGWDiTOUad9eu8wyQci/V/R+hFgs0Bz/HRcjznNH5EVvfQNCD4VNF
g/PET10nIQYZv2BNdi0cwRjR9jCFbw==
=jp0i
-----END PGP SIGNATURE-----
Merge tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Improve stop_machine wait logic: replace cpu_relax_yield call in
generic stop_machine function with a weak stop_machine_yield
function. This is overridden on s390, which yields the current cpu to
the neighbouring cpu after a couple of retries, instead of blindly
giving up the cpu to the hipervisor. This significantly improves
stop_machine performance on s390 in overcommitted scenarios.
This includes common code changes which have been Acked by Peter
Zijlstra and Thomas Gleixner.
- Improve jump label transformation speed: transform jump labels
without using stop_machine.
- Refactoring of the vfio-ccw cp handling, simplifying the code and
avoiding unneeded allocating/copying.
- Various vfio-ccw fixes (ccw translation, state machine).
- Add support for vfio-ap queue interrupt control in the guest. This
includes s390 kvm changes which have been Acked by Christian
Borntraeger.
- Add protected virtualization support for virtio-ccw.
- Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to
remove some code which most likely isn't working at all, besides that
s390 didn't even compile for !CONFIG_SMP.
- Support for special flagged EP11 CPRBs for zcrypt.
- Handle PCI devices with no support for new MIO instructions.
- Avoid KASAN false positives in reworked stack unwinder.
- Couple of fixes for the QDIO layer.
- Convert s390 specific documentation to ReST format.
- Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if
hardware is missing. This way our modules behave like most other
modules and which is also what systemd's systemd-modules-load.service
expects.
- Replace defconfig with performance_defconfig, so there is one config
file less to maintain.
- Remove the SCLP call home device driver, which was never useful.
- Cleanups all over the place.
* tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
docs: s390: s390dbf: typos and formatting, update crash command
docs: s390: unify and update s390dbf kdocs at debug.c
docs: s390: restore important non-kdoc parts of s390dbf.rst
vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1
s390/pci: correctly handle MIO opt-out
s390/pci: deal with devices that have no support for MIO instructions
s390: ap: kvm: Enable PQAP/AQIC facility for the guest
s390: ap: implement PAPQ AQIC interception in kernel
vfio: ap: register IOMMU VFIO notifier
s390: ap: kvm: add PQAP interception for AQIC
s390/unwind: cleanup unused READ_ONCE_TASK_STACK
s390/kasan: avoid false positives during stack unwind
s390/qdio: don't touch the dsci in tiqdio_add_input_queues()
s390/qdio: (re-)initialize tiqdio list entries
s390/dasd: Fix a precision vs width bug in dasd_feature_list()
s390/cio: introduce driver_override on the css bus
vfio-ccw: make convert_ccw0_to_ccw1 static
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
...
When processing Format-0 CCWs, we use the "len" variable as the
number of CCWs to convert to Format-1. But that variable
contains zero here, and is not a meaningful CCW count until
ccwchain_calc_length() returns. Since that routine requires and
expects Format-1 CCWs to identify the chaining behavior, the
format conversion must be done first.
Convert the 2KB we copied even if it's more than we need.
Fixes: 7f8e89a8f2 ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190702180928.18113-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Current code sets the dsci to 0x00000080. Which doesn't make any sense,
as the indicator area is located in the _left-most_ byte.
Worse: if the dsci is the _shared_ indicator, this potentially clears
the indication of activity for a _different_ device.
tiqdio_thinint_handler() will then have no reason to call that device's
IRQ handler, and the device ends up stalling.
Fixes: d0c9d4a89f ("[S390] qdio: set correct bit in dsci")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When tiqdio_remove_input_queues() removes a queue from the tiq_list as
part of qdio_shutdown(), it doesn't re-initialize the queue's list entry
and the prev/next pointers go stale.
If a subsequent qdio_establish() fails while sending the ESTABLISH cmd,
it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and
tiqdio_remove_input_queues() will attempt to remove the queue entry a
second time. This dereferences the stale pointers, and bad things ensue.
Fix this by re-initializing the list entry after removing it from the
list.
For good practice also initialize the list entry when the queue is first
allocated, and remove the quirky checks that papered over this omission.
Note that prior to
commit e521813468 ("s390/qdio: fix access to uninitialized qdio_q fields"),
these checks were bogus anyway.
setup_queues_misc() clears the whole queue struct, and thus needs to
re-init the prev/next pointers as well.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Sometimes, we want to control which of the matching drivers
binds to a subchannel device (e.g. for subchannels we want to
handle via vfio-ccw).
For pci devices, a mechanism to do so has been introduced in
782a985d7a ("PCI: Introduce new device binding path using
pci_dev.driver_override"). It makes sense to introduce the
driver_override attribute for subchannel devices as well, so
that we can easily extend the 'driverctl' tool (which makes
use of the driver_override attribute for pci).
Note that unlike pci we still require a driver override to
match the subchannel type; matching more than one subchannel
type is probably not useful anyway.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Update __ccwdev_check_busid() and __ccwgroupdev_check_busid() to use
"const" qualifiers to fix the compiler warning.
Reported-by: kbuild test robot <lkp@intel.com>
Cc: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
code and avoiding unneeded allocating/copying.
-----BEGIN PGP SIGNATURE-----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=FcTg
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Refactoring of the vfio-ccw cp handling, simplifying the
code and avoiding unneeded allocating/copying.
* tag 'vfio-ccw-20190621' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
vfio-ccw: Skip second copy of guest cp to host
vfio-ccw: Move guest_cp storage into common struct
s390/cio: Combine direct and indirect CCW paths
vfio-ccw: Rearrange IDAL allocation in direct CCW
vfio-ccw: Remove pfn_array_table
vfio-ccw: Adjust the first IDAW outside of the nested loops
vfio-ccw: Rearrange pfn_array and pfn_array_table arrays
s390/cio: Use generalized CCW handler in cp_init()
s390/cio: Generalize the TIC handler
s390/cio: Refactor the routine that handles TIC CCWs
s390/cio: Squash cp_free() and cp_unpin_free()
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just to keep things tidy.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-6-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a really useful function, but it's buried in the
copy_ccw_from_iova() routine so that ccwchain_calc_length()
can just work with Format-1 CCWs while doing its counting.
But it means we're translating a full 2K of "CCWs" to Format-1,
when in reality there's probably far fewer in that space.
Let's factor it out, so maybe we can do something with it later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-5-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It doesn't make much sense to "hide" the copy to the channel_program
struct inside a routine that calculates the length of the chain.
Let's move it to the calling routine, which will later copy from
channel_program to the memory it allocated itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-4-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We already pinned/copied/unpinned 2K (256 CCWs) of guest memory
to the host space anchored off vfio_ccw_private. There's no need
to do that again once we have the length calculated, when we could
just copy the section we need to the "permanent" space for the I/O.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-3-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rather than allocating/freeing a piece of memory every time
we try to figure out how long a CCW chain is, let's use a piece
of memory allocated for each device.
The io_mutex added with commit 4f76617378 ("vfio-ccw: protect
the I/O region") is held for the duration of the VFIO_CCW_EVENT_IO_REQ
event that accesses/uses this space, so there should be no race
concerns with another CPU attempting an (unexpected) SSCH for the
same device.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-2-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This allows device drivers (eg. qeth) to use the struct when processing
information retrieved via RCD.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With both the direct-addressed and indirect-addressed CCW paths
simplified to this point, the amount of shared code between them is
(hopefully) more easily visible. Move the processing of IDA-specific
bits into the direct-addressed path, and add some useful commentary of
what the individual pieces are doing. This allows us to remove the
entire ccwchain_fetch_idal() routine and maintain a single function
for any non-TIC CCW.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-10-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is purely deck furniture, to help understand the merge of the
direct and indirect handlers.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that both CCW codepaths build this nested array:
ccwchain->pfn_array_table[1]->pfn_array[#idaws/#pages]
We can collapse this into simply:
ccwchain->pfn_array[#idaws/#pages]
Let's do that, so that we don't have to continually navigate two
nested arrays when the first array always has a count of one.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190606202831.44135-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Vineeth Vijayan
Julian Wiedmann
Cornelia Huck
Vasily Averin
Jan Höppner
Halil Pasic
Linus Torvalds
Vasily Gorbik
Wei Yongjun
Suzuki K Poulose
Heiko Carstens
Farhan Ali
Eric Farman