Commit Graph

1380 Commits

Author SHA1 Message Date
Paul Gortmaker 8bd26e3a7e arm: delete __cpuinit/__CPUINIT usage from all ARM users
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit  -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings.  In any case, they are temporary and harmless.

This removes all the ARM uses of the __cpuinit macros from C code,
and all __CPUINIT from assembly code.  It also had two ".previous"
section statements that were paired off against __CPUINIT
(aka .section ".cpuinit.text") that also get removed here.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:52 -04:00
Linus Torvalds 9663398a09 ARM: SoC fixes for 3.11-rc
This is our first set of fixes from arm-soc for 3.11.
  - A handful of build and warning fixes from Arnd
  - A collection of OMAP fixes
  - defconfig updates to make the default configs more useful for real use
    (and testing) out of the box on hardware.
 
 And a couple of other small fixes. Some of these have been recently
 applied but it's normally how we deal with fixes, with less bake time
 in -next needed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJR4PeZAAoJEIwa5zzehBx32qAP/jpyDxoktNImkmm84jlB5HEF
 WMY6H4Rc0eI/4oCeMMarSDTjtUGzVNuGlm5AjfT1+NPlIbFPCB5GhuiLkn/OkwIn
 QU0PtOkVigs8Z1aKn1SZ1KD+0py1P9aGEzecq8j9Q0OIMNx3AIA4BP+JIAFKgZZT
 FsgBbAA5oaCgrNMUlvzdrusfKb4ayHJK0dFJILTp8Ts/T1WkMbVnEibnTvKt+y9U
 RcCKQW+fzphOqFrIC1qp31VHkmyFUqiX+conWZEe9TOn233uBumJUjHyNVX6K4AC
 vBORPZ1vutWKbzna6gQYwzjH/o4Sx9QcbtNZ3dwHQW+YAN+OJxyewlHN7yn8VUnS
 icpJNrLREyOHXIhPAdXrf6SjaEhfT+wV7XJY796tEYuLBTeu65l216CGNCRRc6v2
 EBNO8YEqgF6G5DrgiwgqYrzxXLg/kXD+Bqwq2glpfNbmfu9ZIY3VCLBwoiKrDPo5
 63RkYHYvjtE6fl73RgETgrLUJxUx4wZ62b/AyfDPbm8uNn6w/tJsXwXKLcfVw8Bc
 N5kv9w9LZnzhZkxEtXzPRnHPdEE15mS0JAHoqmpVr2bTo7HBRIlkiUtiNo/ZM+sl
 dEJKnkCbBlMBao2jxgPKn4c+nDpUEfnQUgNjFYLUBkiRmOtReVoWKH27KvZ5DJmU
 1UeIVcE1QIjPhwnPeRbl
 =fKfy
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is our first set of fixes from arm-soc for 3.11.
   - A handful of build and warning fixes from Arnd
   - A collection of OMAP fixes
   - defconfig updates to make the default configs more useful for real
     use (and testing) out of the box on hardware

  And a couple of other small fixes.  Some of these have been recently
  applied but it's normally how we deal with fixes, with less bake time
  in -next needed"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  arm: multi_v7_defconfig: Tweaks for omap and sunxi
  arm: multi_v7_defconfig: add i.MX options and NFS root
  ARM: omap2: add select of TI_PRIV_EDMA
  ARM: exynos: select PM_GENERIC_DOMAINS only when used
  ARM: ixp4xx: avoid circular header dependency
  ARM: OMAP: omap_common_late_init may be unused
  ARM: sti: move DEBUG_STI_UART into alphabetical order
  ARM: OMAP: build mach-omap code only if needed
  ARM: zynq: use DT_MACHINE_START
  ARM: omap5: omap5 has SCU and TWD
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ...
2013-07-13 15:00:26 -07:00
Olof Johansson f4b96f5e4f Omap fixes and minor defconfig updates that would be good to
get in before -rc1.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR3RSDAAoJEBvUPslcq6Vz6rAQAK16H8VJB9l8pEzJGDS7/X0j
 8N+j1Zry0Ij0ZHQpzqR71h8Sh72PfdIVFnT6b04cJgBON92dmXqiBNv1pdIHRPlC
 DGyQ0W+vucF38iXRqSa7koxpEM8RRQcS4kJ3wUkvBwWA6s1x+MB/J5qtRkYg6iKI
 GPcBjIdh1pjBSLq37sCLQcSGxKHNH19i47KcN8C6piqiKNxnoDyVZKLAAt0jZNxe
 SrezGdz0keADDf/7/30TAjDBgY1LlWog6M9Ue6D6FO1YwFegWgM7XX3GsZfuhZ4s
 +zssE73UJETauOl7JJ+nsn8GDm2Q6U8zVm1pU9GEezm0pMCTJ2SDhtoxWY5zR/mH
 rYh8ia8IrMlX4mvQbKFhTZH3LWxLlGEJC21sCf5U3KuXv39SJlIjX9Qa/erWpMxd
 9McTyTWL7I6fXuMsuSUjdawvODem3kUXmwANNyMA1/NZ6uAMqK60l+/yLLjJRdFh
 jdFSeZ976ARp52TFqaf47KN3Jc5jJs5NVQ191JaoTxwWmgvaX0mcG8iKO7oaE+1y
 fR096Mt3jobMAbiQUdDnetkNBEiJ8uSJq4Y5IecvshAuPxu71eEB6OCdYQqmUfRo
 Nq8zPGmPKwT8rhCc2B3Paw++uI74f+S0WgsodGsDiBeFHzFztBY4PWKrXfxr9zzY
 01kscgUWM3MJ8xRWtVE+
 =kO4u
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Omap fixes and minor defconfig updates that would be good to
get in before -rc1.

* tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ARM: scu: provide inline dummy functions when SCU is not present
  ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4
  ARM: OMAP2+: timer: initialize before using oh_name

Signed-off-by: Olof Johansson <olof@lixom.net>

Add/move/change conflicts in arch/arm/mach-omap2/Kconfig resolved.
2013-07-12 10:59:39 -07:00
Linus Torvalds 496322bc91 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a9 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...
2013-07-09 18:24:39 -07:00
Robin Holt 7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Linus Torvalds f991fae5c6 Power management and ACPI updates for 3.11-rc1
- Hotplug changes allowing device hot-removal operations to fail
   gracefully (instead of crashing the kernel) if they cannot be
   carried out completely.  From Rafael J Wysocki and Toshi Kani.
 
 - Freezer update from Colin Cross and Mandeep Singh Baines targeted
   at making the freezing of tasks a bit less heavy weight operation.
 
 - cpufreq resume fix from Srivatsa S Bhat for a regression introduced
   during the 3.10 cycle causing some cpufreq sysfs attributes to
   return wrong values to user space after resume.
 
 - New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to
   provide information previously available via related_cpus from
   Lan Tianyu.
 
 - cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin,
   Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and
   Tang Yuantian.
 
 - Fix for an ACPICA regression causing suspend/resume issues to
   appear on some systems introduced during the 3.4 development cycle
   from Lv Zheng.
 
 - ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng,
   Chao Guan, and Zhang Rui.
 
 - New cupidle driver for Xilinx Zynq processors from Michal Simek.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - Changes to make suspend/resume work correctly in Xen guests from
   Konrad Rzeszutek Wilk.
 
 - ACPI device power management fixes and cleanups from Fengguang Wu
   and Rafael J Wysocki.
 
 - ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo.
 
 - Fix for the IA-64 issue that was the reason for reverting commit
   9f29ab1 and updates of the ACPI scan code from Rafael J Wysocki.
 
 - Mechanism for adding CMOS RTC address space handlers from Lan Tianyu
   (to allow some EC-related breakage to be fixed on some systems).
 
 - Spec-compliant implementation of acpi_os_get_timer() from
   Mika Westerberg.
 
 - Modification of do_acpi_find_child() to execute _STA in order to
   to avoid situations in which a pointer to a disabled device object
   is returned instead of an enabled one with the same _ADR value.
   From Jeff Wu.
 
 - Intel BayTrail PCH (Platform Controller Hub) support for the ACPI
   Intel Low-Power Subsystems (LPSS) driver and modificaions of that
   driver to work around a couple of known BIOS issues from
   Mika Westerberg and Heikki Krogerus.
 
 - EC driver fix from Vasiliy Kulikov to make it use get_user() and
   put_user() instead of dereferencing user space pointers blindly.
 
 - Assorted ACPI code cleanups from Bjorn Helgaas, Nicholas Mazzuca and
   Toshi Kani.
 
 - Modification of the "runtime idle" helper routine to take the return
   values of the callbacks executed by it into account and to call
   rpm_suspend() if they return 0, which allows some code bloat
   reduction to be done, from Rafael J Wysocki and Alan Stern.
 
 - New trace points for PM QoS from Sahara <keun-o.park@windriver.com>.
 
 - PM QoS documentation update from Lan Tianyu.
 
 - Assorted core PM code cleanups and changes from Bernie Thompson,
   Bjorn Helgaas, Julius Werner, and Shuah Khan.
 
 - New devfreq driver for the Exynos5-bus device from Abhilash Kesavan.
 
 - Minor devfreq cleanups, fixes and MAINTAINERS update from
   MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and
   Wei Yongjun.
 
 - OMAP Adaptive Voltage Scaling (AVS) SmartReflex voltage control
   driver updates from Andrii Tseglytskyi and Nishanth Menon.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0ZNOAAoJEKhOf7ml8uNsDLYP/0EU4rmvw0TWTITfp6RS1KDE
 9GwBn96ZR4Q5bJd9gBCTPSqhHOYMqxWEUp99sn/M2wehG1pk/jw5LO56+2IhM3UZ
 g1HDcJ7te2nVT/iXsKiAGTVhU9Rk0aYwoVSknwk27qpIBGxW9w/s5tLX8pY3Q3Zq
 wL/7aTPjyL+PFFFEaxgH7qLqsl3DhbtYW5AriUBTkXout/tJ4eO1b7MNBncLDh8X
 VQ/0DNCKE95VEJfkO4rk9RKUyVp9GDn0i+HXCD/FS4IA5oYzePdVdNDmXf7g+swe
 CGlTZq8pB+oBpDiHl4lxzbNrKQjRNbGnDUkoRcWqn0nAw56xK+vmYnWJhW99gQ/I
 fKnvxeLca5po1aiqmC4VSJxZIatFZqLrZAI4dzoCLWY+bGeTnCKmj0/F8ytFnZA2
 8IuLLs7/dFOaHXV/pKmpg6FAlFa9CPxoqRFoyqb4M0GjEarADyalXUWsPtG+6xCp
 R/p0CISpwk+guKZR/qPhL7M654S7SHrPwd2DPF0KgGsvk+G2GhoB8EzvD8BVp98Z
 9siCGCdgKQfJQVI6R0k9aFmn/4gRQIAgyPhkhv9tqULUUkiaXki+/t8kPfnb8O/d
 zep+CA57E2G8MYLkDJfpFeKS7GpPD6TIdgFdGmOUC0Y6sl9iTdiw4yTx8O2JM37z
 rHBZfYGkJBrbGRu+Q1gs
 =VBBq
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the total number of ACPI commits is slightly greater than
  the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
  remains the most active patch submitter.

  To me, the most significant change is the addition of offline/online
  device operations to the driver core (with the Greg's blessing) and
  the related modifications of the ACPI core hotplug code.  Next are the
  freezer updates from Colin Cross that should make the freezing of
  tasks a bit less heavy weight.

  We also have a couple of regression fixes, a number of fixes for
  issues that have not been identified as regressions, two new drivers
  and a bunch of cleanups all over.

  Highlights:

   - Hotplug changes to support graceful hot-removal failures.

     It sometimes is necessary to fail device hot-removal operations
     gracefully if they cannot be carried out completely.  For example,
     if memory from a memory module being hot-removed has been allocated
     for the kernel's own use and cannot be moved elsewhere, it's
     desirable to fail the hot-removal operation in a graceful way
     rather than to crash the kernel, but currenty a success or a kernel
     crash are the only possible outcomes of an attempted memory
     hot-removal.  Needless to say, that is not a very attractive
     alternative and it had to be addressed.

     However, in order to make it work for memory, I first had to make
     it work for CPUs and for this purpose I needed to modify the ACPI
     processor driver.  It's been split into two parts, a resident one
     handling the low-level initialization/cleanup and a modular one
     playing the actual driver's role (but it binds to the CPU system
     device objects rather than to the ACPI device objects representing
     processors).  That's been sort of like a live brain surgery on a
     patient who's riding a bike.

     So this is a little scary, but since we found and fixed a couple of
     regressions it caused to happen during the early linux-next testing
     (a month ago), nobody has complained.

     As a bonus we remove some duplicated ACPI hotplug code, because the
     ACPI-based CPU hotplug is now going to use the common ACPI hotplug
     code.

   - Lighter weight freezing of tasks.

     These changes from Colin Cross and Mandeep Singh Baines are
     targeted at making the freezing of tasks a bit less heavy weight
     operation.  They reduce the number of tasks woken up every time
     during the freezing, by using the observation that the freezer
     simply doesn't need to wake up some of them and wait for them all
     to call refrigerator().  The time needed for the freezer to decide
     to report a failure is reduced too.

     Also reintroduced is the check causing a lockdep warining to
     trigger when try_to_freeze() is called with locks held (which is
     generally unsafe and shouldn't happen).

   - cpufreq updates

     First off, a commit from Srivatsa S Bhat fixes a resume regression
     introduced during the 3.10 cycle causing some cpufreq sysfs
     attributes to return wrong values to user space after resume.  The
     fix is kind of fresh, but also it's pretty obvious once Srivatsa
     has identified the root cause.

     Second, we have a new freqdomain_cpus sysfs attribute for the
     acpi-cpufreq driver to provide information previously available via
     related_cpus.  From Lan Tianyu.

     Finally, we fix a number of issues, mostly related to the
     CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
     up some code.  The majority of changes from Viresh Kumar with bits
     from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
     Arnd Bergmann, and Tang Yuantian.

   - ACPICA update

     A usual bunch of updates from the ACPICA upstream.

     During the 3.4 cycle we introduced support for ACPI 5 extended
     sleep registers, but they are only supposed to be used if the
     HW-reduced mode bit is set in the FADT flags and the code attempted
     to use them without checking that bit.  That caused suspend/resume
     regressions to happen on some systems.  Fix from Lv Zheng causes
     those registers to be used only if the HW-reduced mode bit is set.

     Apart from this some other ACPICA bugs are fixed and code cleanups
     are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
     Zhang Rui.

   - cpuidle updates

     New driver for Xilinx Zynq processors is added by Michal Simek.

     Multidriver support simplification, addition of some missing
     kerneldoc comments and Kconfig-related fixes come from Daniel
     Lezcano.

   - ACPI power management updates

     Changes to make suspend/resume work correctly in Xen guests from
     Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
     cleanups and fixes of the ACPI device power state selection
     routine.

   - ACPI documentation updates

     Some previously missing pieces of ACPI documentation are added by
     Lv Zheng and Aaron Lu (hopefully, that will help people to
     uderstand how the ACPI subsystem works) and one outdated doc is
     updated by Hanjun Guo.

   - Assorted ACPI updates

     We finally nailed down the IA-64 issue that was the reason for
     reverting commit 9f29ab11dd ("ACPI / scan: do not match drivers
     against objects having scan handlers"), so we can fix it and move
     the ACPI scan handler check added to the ACPI video driver back to
     the core.

     A mechanism for adding CMOS RTC address space handlers is
     introduced by Lan Tianyu to allow some EC-related breakage to be
     fixed on some systems.

     A spec-compliant implementation of acpi_os_get_timer() is added by
     Mika Westerberg.

     The evaluation of _STA is added to do_acpi_find_child() to avoid
     situations in which a pointer to a disabled device object is
     returned instead of an enabled one with the same _ADR value.  From
     Jeff Wu.

     Intel BayTrail PCH (Platform Controller Hub) support is added to
     the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
     driver is modified to work around a couple of known BIOS issues.
     Changes from Mika Westerberg and Heikki Krogerus.

     The EC driver is fixed by Vasiliy Kulikov to use get_user() and
     put_user() instead of dereferencing user space pointers blindly.

     Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
     Kani.

   - Assorted power management updates

     The "runtime idle" helper routine is changed to take the return
     values of the callbacks executed by it into account and to call
     rpm_suspend() if they return 0, which allows us to reduce the
     overall code bloat a bit (by dropping some code that's not
     necessary any more after that modification).

     The runtime PM documentation is updated by Alan Stern (to reflect
     the "runtime idle" behavior change).

     New trace points for PM QoS are added by Sahara
     (<keun-o.park@windriver.com>).

     PM QoS documentation is updated by Lan Tianyu.

     Code cleanups are made and minor issues are addressed by Bernie
     Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.

   - devfreq updates

     New driver for the Exynos5-bus device from Abhilash Kesavan.

     Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
     Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.

   - OMAP power management updates

     Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
     updates from Andrii Tseglytskyi and Nishanth Menon."

* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  cpufreq: Fix cpufreq regression after suspend/resume
  ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
  PM / Sleep: Warn about system time after resume with pm_trace
  cpufreq: don't leave stale policy pointer in cdbs->cur_policy
  acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
  cpufreq: make sure frequency transitions are serialized
  ACPI: implement acpi_os_get_timer() according the spec
  ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
  ACPI: Add CMOS RTC Operation Region handler support
  ACPI / processor: Drop unused variable from processor_perflib.c
  cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
  ...
2013-07-03 14:35:40 -07:00
Linus Torvalds fb2af0020a Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "This contains the usual updates from other people (listed below) and
  the usual random muddle of miscellaneous ARM updates which cover some
  low priority bug fixes and performance improvements.

  I've started to put the pull request wording into the merge commits,
  which are:

   - NoMMU stuff:

     This includes the following series sent earlier to the list:
      - nommu-fixes
      - R7 Support
      - MPU support

     I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I
     were discussing today until we've reached a conclusion/that's had
     some more review.

     This is rebased (and re-tested) on your devel-stable branch because
     otherwise there were going to be conflicts with Uwe's V7M work now
     that you've merged that.  I've included the fix for limiting MPU to
     CPU_V7.

   - Huge page support

     These changes bring both HugeTLB support and Transparent HugePage
     (THP) support to ARM.  Only long descriptors (LPAE) are supported
     in this series.

     The code has been tested on an Arndale board (Exynos 5250).

   - LPAE updates

     Please pull these miscellaneous LPAE fixes I've been collecting for
     a while now for 3.11.  They've been tested and reviewed by quite a
     few people, and most of the patches are pretty trivial.  -- Will Deacon.

   - arch_timer cleanups

     Please pull these arch_timer cleanups I've been holding onto for a
     while.  They're the same as my last posting, but have been rebased
     to v3.10-rc3.

   - mpidr linearisation (multiprocessor id register - identifies which
     CPU number we are in the system)

     This patch series that implements MPIDR linearization through a
     simple hashing algorithm and updates current cpu_{suspend}/{resume}
     code to use the newly created hash structures to retrieve context
     pointers.  It represents a stepping stone for the implementation of
     power management code on forthcoming multi-cluster ARM systems.

     It has been tested on TC2 (dual cluster A15xA7 system), iMX6q,
     OMAP4 and Tegra, with processors hitting low-power states requiring
     warm-boot resume through the cpu_resume code path"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: 7775/1: mm: Remove do_sect_fault from LPAE code
  ARM: 7777/1: Avoid extra calls to the C compiler
  ARM: 7774/1: Fix dtb dependency to use order-only prerequisites
  ARM: 7770/1: remove residual ARMv2 support from decompressor
  ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation
  ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator
  ARM: 7767/1: let the ASID allocator handle suspended animation
  ARM: 7766/1: versatile: don't mark pen as __INIT
  ARM: 7765/1: perf: Record the user-mode PC in the call chain.
  ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
  ARM: kernel: implement stack pointer save array through MPIDR hashing
  ARM: kernel: build MPIDR hash function data structure
  ARM: mpu: Ensure that MPU depends on CPU_V7
  ARM: mpu: protect the vectors page with an MPU region
  ARM: mpu: Allow enabling of the MPU via kconfig
  ARM: 7758/1: introduce config HAS_BANDGAP
  ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting
  ARM: 7751/1: zImage: don't overwrite ourself with a page table
  ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock
  ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
  ...
2013-07-03 09:46:29 -07:00
Arnd Bergmann d81f58753e Renesas ARM based SoC fixes for v3.11
* Correct GIO3 base addresses for EMEV2 SoC
   - This bug bug added when GPIO support was added for the EMEV2 SoC
     in v3.5
 
 * Correct SCIFB0 resources for r8a77a4 SoC
   - This was a bug was added when SCIF support was added for the r8a77a4 SoC
     in v3.10
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0lbbAAoJENfPZGlqN0++OWUP/0VlPx8PEWoRbEEC80Lgg/c2
 YMjpxU9XkZSWwyH5NUMBJyYrXHSuSj6Tn9yxTZM6M7nQuQ3YGmhlfQ7QBZOip2BU
 Mlrij4BUSJdhC/GtPdkZ8rm79KqEmeXTIW62l0FvQ1SwgF2TFIlQT+qeli2SZan2
 VjZe0g+WnOQWSlzwQqkpu6uFJZr3SwHrtxSE8Lmx7sVz6wfSbk98gdVOOg4AYQLn
 GMFSwRW4sAOy2yBHyQW36NNY0oY119ioZYgpZmxg0SPd7arCtA5vmrS2PyVKfWbM
 XizuTIhG21i/v/nRHqplbjeb4O8AHqc9bNMqMekr5+ZbysoOxrUrah2yCigQucZL
 /26/b3w3Wxsizzp0osqoEct3+jnVZSXztzrDiSyJbEjs+tLspe9nFCOjFZnZADq2
 2odatr2MI6cleKysjnZsJtVAzZ3LE1fL5FGyFA6pB2AMFAOcAquG2A3OFdu066Kd
 9nMau3dLZCehInrLkkEAyWwB1ywAfXmat06xQlAqd7K0d7YIN0TbNJ+wNEbn6z28
 rLCGdbACSentV6d+Jn9eHixMmIrmsPSnbKzSsjgAeeaDpKbZYSAcsqx9gQ8NNImv
 WqpNEJ27iAGcmhfPo5tIsHHDPcUueqnIzRrqCwry9Lfd8Ra0dqA3fkcBQhC3OSgs
 2fLYRDib/eu2q9f4Z2Id
 =+CUy
 -----END PGP SIGNATURE-----

Merge tag 'renesas-fixes-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Renesas ARM based SoC fixes for v3.11

* Correct GIO3 base addresses for EMEV2 SoC
  - This bug bug added when GPIO support was added for the EMEV2 SoC
    in v3.5

* Correct SCIFB0 resources for r8a77a4 SoC
  - This was a bug was added when SCIF support was added for the r8a77a4 SoC
    in v3.10

* tag 'renesas-fixes-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: emev2 GIO3 resource fix
  ARM: shmobile: r8a73a4: Fix resources for SCIFB0
2013-07-03 14:39:34 +02:00
Linus Torvalds 42daabf62b ARM SoC late changes
These are changes that arrived a little late before the merge
 window or that have multiple dependencies on previous branches
 so they did not fit into one of the earlier ones. There
 are 10 branches merged here, a total of 39 non-merge commits.
 Contents are a mixed bag for the above reasons:
 
 * Two new SoC platforms: ST microelectronics stixxxx and
   the TI 'Nspire' graphing calculator. These should have
   been in the 'soc' branch but were a little late
 * Support for the Exynos 5420 variant in mach-exynos,
   which is based on the other exynos branches to avoid
   conflicts.
 * Various small changes for sh-mobile, ux500 and davinci
 * Common clk support for MSM
 
 Conflicts:
 * In Kconfig.debug, various additions trivially conflict,
   the list should be kept in alphabetical order when
   resolving.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnl2CrR//JCVInAQIrKhAAwvtsGNe6j9nDuLEitWtQAmhHYZQyUJ8k
 o9j/1j1CqhE8C0bLRud8D4m1GxfxbGeRm2d0HoNbxda3FmntUufqBDi6neMiQiLO
 VltC5rOYL8Mday0Asc3SBfjBj8SZC2bypicKy5zUfzsObCBt343g1WvYffMDNmwH
 FveOQK6q2BKmO67cazc9tk5xmxjVwP/LB8r5mQtiXmMguw0R+ZIDDIP6xaURFkxX
 SAElleD2wtvpVHP1d6AKHpXN99u3xV3uoJjKljECEXdBzW/ZX8m7FG2tKY5xy368
 ta0Nhh2MSRnBhUYOH9uah4PQWYEsbZ+M/W+3J9tKRu6q9D/c/AAxILyXUY2tcHNC
 o1UwcUn1druirx3X1AW8HYAGNwW7BD3HANzIiUkQZG7ByfM4qCtUEo2SAFNIGBoR
 v1FMLhMPgMWotZnKrDQQd0anxkKIOFaSMRVgpQLW2jQt/B7sHLmEH2yDffkbSD76
 PQDThnW/dfm9dgeK+X4fPrveIMKbjQlbFz0okN+LPsUf8e1045HBgCi2A0lTIGWM
 kVVgXHKKXi8G8HBa4VyDlORVHXk1bJEheF+zlDvdk4fHkcf+H/OfvFG2O9TdIdpb
 ITXRyyteaRM4YIZpnJbzeeZDZXT89c2ah7xq36iM+L1ScidyntPquViXeasSc8r6
 pKu9ZDc0Mow=
 =cRu2
 -----END PGP SIGNATURE-----

Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...
2013-07-02 14:42:51 -07:00
Linus Torvalds ee1a8d402e ARM SoC device tree changes
These changes from 30 individual branches for the most part update device
 tree files, but there are also a few source code changes that have crept
 in this time, usually in order to atomically move over a driver from
 using hardcoded data to DT probing.
 
 A number of platforms change their DT files to use the C preprocessor,
 which is causing a bit of churn, but that is hopefully only this once.
 
 There are a few conflicts with the other branches unfortunately:
 
 * in exynos5440.dtsi and kirkwood-6281.dtsi, device nodes are added
   from multiple branches. Need to be careful to have the right
   set of closing braces as git gets this one wrong.
 
 * In kirkwood.dtsi, one 'ranges' line got split into two lines, while
   another line got added. Order of the lines does not matter.
 
 * in sama5d3.dtsi, some cleanup was merged the wrong way, causing
   a bogus conflict. We want the 'dmas' and 'dma-names' properties
   to get added here.
 
 * Two lines got removed independently in arch/arm/mach-mxs/mach-mxs.c
 
 * Contents get added independently in arch/arm/mach-omap2/cclock33xx_data.c
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnpGCrR//JCVInAQI50RAAsXbH1SGvjKJemXhRkFloPDYpCbgdDUFr
 ChUbjNV1xsY/jaNCfMa5/Qo7lgz/Ot7BpJef9fZn7ret+dc7nchqe/4iIkAokAUh
 E4ao9D1dP5aAA0ihdbSQHCZtR/0SUR81h6BoOVuo/1mvEiBaFbWAeYe8/6LJd9II
 OU1w9bDmjfZWYFUXs+j2VF76ueZQ+kz69XDKZUGtkqN76m1AL8lGDurj5jxvyllF
 VJns8d9q2nr2q9PferfajK6rkOIPaTpwKblxZHUgobCyOitZaiZM0NgF733TsNM6
 HXmhDhkcn7T81+SiHVfigJ/nxo9UgU4zNJCODF3WZIwGIj3FbxvCOpdCYi2NhCO8
 oLcgDk57tpoKpB3gvAmYVQHP9FIepFa/WAWyPIADA7PkpYrwgc4v+cLEHXpd8SRv
 viLLIa5QuNdMeaK+Md9OKmKZFd7uFD9jiMtmdm6IpEVDDjMgoteb2XSoEtNebmtY
 MfbW4okn118a2dFKKaPTKcXVW/a5FRp2JGfB0A58RQHaJWj3JsY1bFn/xWPEpTOA
 IWB/HHMln0LYTL2AXN9HcaL1jnGI1Wq5eWBurX+cXQ/ij1A6jfoRKYglx7AQqOHj
 iWcGYtKLLJCgiWFnLSwcljZhfoYr0/z7rhns6yo7/vhN0riy+M84OgN4HbAmUzc1
 Bgy9PnJTNo8=
 =8PtJ
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...
2013-07-02 14:23:01 -07:00
Linus Torvalds 40e71e7015 ARM SoC board specific changes
These are 18 branches on 9 platforms with board specific changes, mostly
 for defconfig files, but nothing really exciting in here.
 
 Since the shmobile platform still uses board files for some of the newer
 machines, we get a few changes there as the result of drivers getting
 enabled for those boards. This causes some conflicts with contents getting
 added from multiple branches in sh-mobile specific files. Renesas is
 putting a lot of work into migrating to device-tree based setup, which
 will make all those files obsolete in the future and avoid both the
 conflicts and the need to have these files in the first place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnmmCrR//JCVInAQKNuxAAxXpBslUGRpI8O28KHA3EeL+9HR5wBoKo
 K6q6fQlAv9dcGJOx7fkyHU4UfE1kV+M6l4R9BM8VcjflQjCnG4GrQo8qgJNY14nf
 OpQKSIHEtdBHzFpHEIxogByR1i05hL8nrm21TElgi/aYlDwKbXnApY23ubApPif4
 oXmES9ppXvnz1D7bCE7PaZf+TIgufpPFkioQYcV93nD0x5tYu1mZn2xSfYDekAyU
 mUe1p2oX+77U0lohVQCo1H/ZOJBdoAN1U//2QCiL8YKJitQf/vOVs3QtHEUywIiU
 CyUaDhfM7sX4QKBWzwjxoVOcT6QC/qhaaqaases0gjgjepKaSqUTZMBdLI7oyF3o
 2ExYv8BMGilbIyNUYoxeoqz9zA3IQ7wDxaBh3G1JY9k0/BhKmsEwtGYkSJPdOgpt
 XyX7N/xKzy0lTWf1N4eSWUiccfXdVjLFf3Jp2xA7e/KJfzFAF/RJXdGiV2Kzdr7m
 mZ7ESYRk+S3ENgpI/QI4C6kQ7EBynQjhn5t2+iK9k4gKNspNZ3TjLCQif0v0xE3H
 IIsaSqLBuj9IZ1r13fpQJZIyTr+dHsx2s6QQBFXYzeQ/cjfSRGZP4FmYyweGctfR
 Hh1AAshrOAwNl4ZdXgIT08JKtBocaGFUtt4syvPfAFYoojMN58xg5EG4FYtKpKHp
 xU6w43o6KnQ=
 =7bgc
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These are 18 branches on 9 platforms with board specific changes,
  mostly for defconfig files, but nothing really exciting in here.

  Since the shmobile platform still uses board files for some of the
  newer machines, we get a few changes there as the result of drivers
  getting enabled for those boards.  This causes some conflicts with
  contents getting added from multiple branches in sh-mobile specific
  files.  Renesas is putting a lot of work into migrating to device-tree
  based setup, which will make all those files obsolete in the future
  and avoid both the conflicts and the need to have these files in the
  first place."

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
  arm: multi_v7_defconfig: Enable initrd/initramfs support
  arm: multi_v7_defconfig: Enable Zynq UART driver
  ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
  ARM: OMAP1: nokia770: enable Tahvo
  ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
  arm: omap: board-overo: reset GPIO for SMSC911x
  ARM: shmobile: BOCK-W: change Ether device name
  ARM: ux500: board-mop500: remove unused pin modes
  ARM: shmobile: bockw: add MMCIF support
  ARM: shmobile: bockw: add SPI FLASH support
  ARM: shmobile: bockw: add I2C device support
  ARM: shmobile: BOCK-W: add Ether support
  ARM: tegra: defconfig updates
  ARM: shmobile: bockw defconfig: add MMCIF support
  ARM: shmobile: bockw defconfig: add M25P80 support
  ARM: shmobile: bockw defconfig: add RTC RX8581 support
  ARM: shmobile: marzen: keep local function as static
  ARM: shmobile: bockw: add SDHI0 support
  ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
  ARM: shmobile: lager: support GPIO switches
  ...
2013-07-02 14:10:26 -07:00
Magnus Damm 1eb14ea1e6 ARM: shmobile: emev2 GIO3 resource fix
Fix GIO3 base addresses for EMEV2.

This bug was introduced by 088efd9273
("mach-shmobile: Emma Mobile EV2 GPIO support V3") which was included in v3.5.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Cc: stable@vger.kernel.org
2013-07-02 12:28:01 +09:00
Takanari Hayama f820b60582 ARM: shmobile: r8a73a4: Fix resources for SCIFB0
Fix base address and IRQ resources associated with SCIFB0.

This bug was introduced by e481a52890
("ARM: shmobile: r8a73a4 SCIF support V3") which was included in v3.10.

Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Acked-by: Magnus Damm <damm@opensource.se>
[ horms+renesas@verge.net.au: Add information about commit and version
  this bug was added in ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Cc: stable@vger.kernel.org
2013-07-01 17:48:35 +09:00
Russell King 3c0c01ab74 Merge branch 'devel-stable' into for-next
Conflicts:
	arch/arm/Makefile
	arch/arm/include/asm/glue-proc.h
2013-06-29 11:44:43 +01:00
Rafael J. Wysocki 39a95f4861 Merge branch 'pm-cpufreq-assorted' into pm-cpufreq
* pm-cpufreq-assorted: (21 commits)
  cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: e_powersaver: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: ACPI: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: make __cpufreq_notify_transition() static
  cpufreq: Fix minor formatting issues
  cpufreq: Fix governor start/stop race condition
  cpufreq: Simplify userspace governor
  cpufreq: powerpc: move cpufreq driver to drivers/cpufreq
  cpufreq: kirkwood: Select CPU_FREQ_TABLE option
  cpufreq: big.LITTLE needs cpufreq table
  cpufreq: SPEAr needs cpufreq table
  cpufreq: powerpc: Add cpufreq driver for Freescale e500mc SoCs
  cpufreq: remove unnecessary cpufreq_cpu_{get|put}() calls
  cpufreq: MAINTAINERS: Add git tree path for ARM specific updates
  cpufreq: rename index as driver_data in cpufreq_frequency_table
  cpufreq: Don't create empty /sys/devices/system/cpu/cpufreq directory
  cpufreq: Move get_cpu_idle_time() to cpufreq.c
  cpufreq: governors: Move get_governor_parent_kobj() to cpufreq.c
  cpufreq: Add EXPORT_SYMBOL_GPL for have_governor_per_policy
  ...
2013-06-27 21:46:45 +02:00
Arnd Bergmann 0ad578ef25 Renesas sh-sci updates for v3.11
HSCIF support by Ulrich Hecht.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRyqpMAAoJENfPZGlqN0++KbMP/3XPeCGPyiAvoEYFT68CTUE3
 vtyVU5APL7rJ7eCkuxXvBriJ8GRcL95NUwK7kss3kPDpSTkNf4UmVCgrs1mj2gjl
 8PxjxGzyeryDl/cILx1EOJYkmhm6TUjbeFrd2uFOxntbhItnCrEAHDwx7AxQhI79
 Enz3L0moU1v8rq/MBiyGKh1wD2UFgyzcqbxhsdxhDurgbhElfnccWxjK9DVXxCAP
 c9Lyc0GIC5CniI+LITgcbay93/2//5/ytSQTc3gDfbNkVk/8sa4HWyV4XLDNNCAz
 EclVD9fLBXHITVtid6c/Nxqnn+6W31LKKsR52XDYs8anT61YxoO6QHzEiXPpzEvF
 3NbR9Vv3EpgIe6NXn0JB5GwOvggJxWHNg9/8LspyZujtzS99fLe00L0ICEftfsVp
 62wUnvC/477DuXr5e/o8YrSvWxnKq51tqoFthWUEn6FkjoUYC8eNuCAnvKrODf4i
 y5FokvDepmhElLFOFWuCDahPeSy512WKtsGNLKzulwLF0zEmpkAitw6gtE044fsk
 FLtaA8SpmdgbH0NiLW0jFuNR4w36vPZ2g7mCqWGlkAxMC9jlitfWDvSG+KssqEL6
 ObgR3GyuYrHqVgB7vqGztqvZWekBSsQXdk5Y80mN15M+3qO5KwYjKo89U8lWMS4W
 zMq5g9o/qW7C9NnHCPA2
 =bnU/
 -----END PGP SIGNATURE-----

Merge tag 'renesas-sh-sci-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late

Renesas sh-sci updates for v3.11

HSCIF support by Ulrich Hecht.

* tag 'renesas-sh-sci-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: shmobile: r8a7790: don't use external clock for SCIFs
  ARM: shmobile: r8a7790: HSCIF support
  serial: sh-sci: HSCIF support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-27 14:26:33 +02:00
Arnd Bergmann 4022acdb5b Merge branch 'renesas/boards2' into next/late
Conflicts:
	arch/arm/mach-shmobile/setup-r8a7778.c

This is a dependency for the Renesas sh-sci updates.

Signedf-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-27 14:26:06 +02:00
Arnd Bergmann 969ae2ac40 Second Round of Renesas ARM-based SoC board updates for v3.11
* Extended hardware coverage for the Bock-W board
   by Goda-san and Morimoto-san
 * Correction to Ether device name for the Bock-W board
   from Sergei Shtylyov
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRwazgAAoJENfPZGlqN0++JggP/1E3cHhSGHVRIdTFjtTMh+j2
 mHpgNuFWF40ONuKNI2DgVsRWpPOIMu1c/GrAs36PaZqnfzVbyGpPkvqxsV62jEV6
 oTWqHKCDCZ11/XEoqZgcMN2pmer5T/Kt8WYbIUBrl7ygJcfk2hglTPpIr/Y1m6fT
 /brVsX0OZjCeQs7MLggf0SPwNviRHb8/68MadY+Zd7qvSzPdTc19fA9m8kAd1y1q
 PXRP3d/IZECF7nPBCNtdCs8KuMqA4+GAZwRw+Ubl6J97X0uHGLKcaCQxpX8YVEHd
 odYvEEZDDzvBPnxksuPH7cJ0uRNjMCRCGrMv2cuZXcYcMHzW9liZdjQCGxZk7amp
 QyX9PArKiURKjF2eoNLuYUjruOBwRib3X1RgiRyi2UWQYZOgphYbBWoD+DheIRQG
 V5EMmr+Z2itwNMbrpCh/OauZMSkRqJk4H3j899wNtb10k+zh0BJtc/YF3ACiqfj8
 qeyADaF1FZaV6w3S55CM7PWJuGEa8BCdL7F0FFXbexbnYL0X5pxI8a8ZMwWGpG/e
 V8/d1znpcxvoDROO/auJLQX7+2SugH3wSdWsG5UQa6D5VZJj4+mK14DdIVmWFurY
 t0tzvSJoJ++d5mya/8P/KCSREGtcMNJWvSeW9AUwTI4tlI+4t3NDJKm1g2sL+fxE
 tV2UydtHUD2NGPVrC17x
 =93dZ
 -----END PGP SIGNATURE-----

Merge tag 'renesas-boards2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:

Second Round of Renesas ARM-based SoC board updates for v3.11

* Extended hardware coverage for the Bock-W board
  by Goda-san and Morimoto-san
* Correction to Ether device name for the Bock-W board
  from Sergei Shtylyov

* tag 'renesas-boards2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: BOCK-W: change Ether device name
  ARM: shmobile: bockw: add MMCIF support
  ARM: shmobile: bockw: add SPI FLASH support
  ARM: shmobile: bockw: add I2C device support
  ARM: shmobile: BOCK-W: add Ether support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21 15:09:42 +02:00
Arnd Bergmann 30e544612c Renesas ARM based SoC boot cleanup for v3.11
Work by Magnus Damm and others to clean up the boot of and move
 things closer to supporting multi-arch.
 
 As a side effect of this work it was decided to remove support for
 two boards, Bonito and AP4EVB. Those patches are included in this
 series as they depend on earlier patches in the series.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRvsCNAAoJENfPZGlqN0++JDAP/ROJOKamUa2/b34ebTVq53Os
 4u9twxIGRQ/HJzpFZSV4ak/M9G4sl19+V8s46qaKnCwoKlc7GZW/qNqIEgN9cDrz
 ht9mbcJ8BTtinUo1nxzIFMOWB0WltSvmlxNeKm6OxG+BXu/lJ6BoPrhoO/qc49kc
 eHYAHdVDYIlr+kMlAw8HIbpJqsMiQviq8b8S8aqoW1QSHHlTgL2GNoQH/tli/r8m
 XNei4RrTABUq1r04oOBN+0FQKyn5lWgq5hMtdWsP8VvhaW6kwX3Hwl7f+dn/xDna
 XB6J3z+/jFTs6aR0Njm8LlJv2Q4SFJE595z/6j9upWS+e7pG+et+SMVSwPCeKzr2
 pcCfFpce9e8KIPVUdKlZqMw1BMO/ok1BnpTtdBuAZW2zriW0EeUe0SgFk8GzHC3E
 p+JqgeEcbN0lO6WKJ9YfPH6WSt8JUYDse3ldxBlf3pGezaV8G/hccZFnOc0BHXV+
 5cTGeJpFEdFcNWvxKvJytehQLTl05KvGyE52AnDLrjq1aIVflYUzTlccm14PpSAC
 kTNqEpUd3qIcINi6Udt5WPRIMj6gIXl6zLAkqxufcIhYW86E2DejnWcxo5UbLXyH
 30K0BbY90oVc2hJKu32HBu11kI6RlIa9qjBHYI8WAZ+uGplHqD2WaBmXojFElrbH
 JVDkg2BtreVa5q4Xot0L
 =1+Oa
 -----END PGP SIGNATURE-----

Merge tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:

Renesas ARM based SoC boot cleanup for v3.11

Work by Magnus Damm and others to clean up the boot of and move
things closer to supporting multi-arch.

As a side effect of this work it was decided to remove support for
two boards, Bonito and AP4EVB. Those patches are included in this
series as they depend on earlier patches in the series.

* tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove Bonito board support
  ARM: shmobile: Remove AP4EVB board support
  ARM: shmobile: Remove mach/memory.h
  ARM: shmobile: Remove MEMORY_START/SIZE
  ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT
  ARM: shmobile: Remove old SCU boot code
  ARM: shmobile: EMEV2 SMP with SCU boot fn and args
  ARM: shmobile: sh73a0 SMP with SCU boot fn and args
  ARM: shmobile: r8a7779 SMP with SCU boot fn and args
  ARM: shmobile: Add SCU boot function using argument
  ARM: shmobile: Add SMP boot function and argument
  ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
  ARM: shmobile: Remove romImage CONFIG_MEMORY_START
  ARM: shmobile: Let romImage rely on default ATAGS
  ARM: shmobile: uImage load address rework

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21 14:57:38 +02:00
Arnd Bergmann 704b1005d1 Renesas ARM based SoC cleanups for v3.11
__initdata annotations for the r8a7790 SoC by Morimoto-san.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRvrESAAoJENfPZGlqN0++Kl4P/j1twlyTQ7WA99/qba3Ql36u
 hGUbqmpoq5MtqdIrkJh4L48Y5M2+MJmmQaH9CkxyxlsmIFDvAb5Ta55iQ6BJgap3
 I6yLxRbhQ2ZhydaY/VrtSQLtPg1wAmAYdfTP/1FT+XuR5JddBk95j9I91LnzkTuP
 pUr6k3Ahz9Uz6//cYIdyBvM5y1CWSMtwhSTjL7Fb8UXWls/PzRrvmP1lWH5h0v8L
 PZAmVWIE5AaeChd8Z88rtlcf61TouxDnghe72yFlE4A9RD3JFjoduBo7/izn3EAA
 BYEAyqJYvrW9mxrMuyJlpE8+Gy2CGB0asKYu63n9FYC6T+RKVhNtGNHJ35ys3xMa
 hmAOkpa2oFTJI57APtmR+/SzCGTXElqRNw5LJP95GZkpa5PsugtRXVpczgdTOvnv
 4VswyH6EzdzcW5KQYE3v/Zp3/58ZzbLzj+nRkjLG1shi739+CQuJngQin+GGdBWL
 hUEIgoNuZl1GN/OjMQzpt5b+rWfIyy8jnRTcluvaNIulaFhqc/sYvolurqQGWa0n
 U/mSIZT/PxQftguAgUfzhV1vgvJ80Kkb37c9UKwglJjX7E0oNCkZZ8JD9sce7EXn
 IvOZL8k8IPDrl8URtNV3IialW3FpGCwM7S/DZ8qM4JHgBYEbJGZ2QGboUMgvnOBo
 cEveedi1Qur0x4ZKYrS7
 =i7Kv
 -----END PGP SIGNATURE-----

Merge tag 'renesas-cleanup-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late

From Simon Horman:

Renesas ARM based SoC cleanups for v3.11

__initdata annotations for the r8a7790 SoC by Morimoto-san.

* tag 'renesas-cleanup-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (158 commits)
  ARM: shmobile: r8a7790: add __initdata on resource and device data

Based on 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21 14:54:09 +02:00
David S. Miller d98cae64e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/ath/ath9k/Kconfig
	drivers/net/xen-netback/netback.c
	net/batman-adv/bat_iv_ogm.c
	net/wireless/nl80211.c

The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.

The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().

Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.

The nl80211 conflict is a little more involved.  In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported.  Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.

However, the dump handlers to not use this logic.  Instead they have
to explicitly do the locking.  There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so.  So I fixed that whilst handling the overlapping changes.

To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 16:49:39 -07:00
Sergei Shtylyov 2c83322ce8 ARM: shmobile: BOCK-W: change Ether device name
When changing the name of Ether platform device in the commit c02f846938 (ARM:
shmobile: r8a7778: fix Ether device name), I completely forgot that there's also
platform  device name used in bockw_pinctrl_map[], so the commit "ARM: shmobile:
BOCK-W: add Ether support" went in with the old "sh-eth" device name. Now change
it to "r8a777x-ether" in accordance with the commits that are now in  the  'net-
next.git' repository,  otherwise BOCK-W Ether support won't work in 3.11.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-18 16:22:45 +09:00
Ulrich Hecht c972f024c1 ARM: shmobile: r8a7790: don't use external clock for SCIFs
This is an external component and may or may not be there, while the
internal clock always works.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 18:09:54 +09:00
Ulrich Hecht d44f8308cf ARM: shmobile: r8a7790: HSCIF support
Adds support for HSCIF0 and HSCIF1 on the r8a7790.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
[ horms+renesas@verge.net.au this is the setup-r8a7790.c
  which I somehow miss-applied as part of another patch.
  The clock-r8a7790.c portion of this patch has already been merged. ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 18:09:54 +09:00
Kuninori Morimoto 53332005bf ARM: shmobile: Remove Bonito board support
Remove board support for the r8a7740 based Bonito board

The r8a7740 SoC support code is still kept around since it
is in use by the Armadillo800eva board which is basically a more
recent board where the design is based on Bonito.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:31 +09:00
Magnus Damm b24bd7e97b ARM: shmobile: Remove AP4EVB board support
Remove board support for the sh7372 based AP4EVB board

The sh7372 SoC support code is still kept around since it
is in use by the Mackerel board which is basically a more
recent board where the design is based on AP4EVB.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:31 +09:00
Magnus Damm 21ba05a6c2 ARM: shmobile: Remove mach/memory.h
Remove mach-shmobile memory.h since it is no longer needed.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:30 +09:00
Magnus Damm 3c2b1042d2 ARM: shmobile: Remove MEMORY_START/SIZE
Remove CONFIG_MEMORY_START and CONFIG_MEMORY_SIZE from mach-shmobile.

Boards should use DT to specify their memory setup. Boards that still
not support DT may pass ATAGS with memory information from the boot
loader. If those ATAGS turn out to be incorrect then appended DTB with
memory information should be used as a workaround.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:30 +09:00
Magnus Damm 4f6da36f7e ARM: shmobile: Remove old SCU boot code
Remove shmobile_secondary_vector_scu now when all SCU enabled
SMP platforms instead make use of shmobile_boot_scu. This
removes two inline virtual to physical address conversions.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:29 +09:00
Magnus Damm a188bfcafa ARM: shmobile: EMEV2 SMP with SCU boot fn and args
Let EMEV2 make use of shmobile_boot_fn and shmobile_boot_arg
together with shmobile_boot_scu and the SCU base address.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:28 +09:00
Magnus Damm abfa04eb12 ARM: shmobile: sh73a0 SMP with SCU boot fn and args
Let sh73a0 make use of shmobile_boot_fn and shmobile_boot_arg
together with shmobile_boot_scu and the SCU base address.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:28 +09:00
Magnus Damm af642310aa ARM: shmobile: r8a7779 SMP with SCU boot fn and args
Let r8a7779 make use of shmobile_boot_fn and shmobile_boot_arg
together with shmobile_boot_scu and the SCU base address.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:27 +09:00
Magnus Damm bfabbcc679 ARM: shmobile: Add SCU boot function using argument
Add a shmoible_boot_scu function that assumes that the base address
of the SCU is passed in r0. This code is free from inline virtual
to physical address conversion.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:27 +09:00
Magnus Damm ebe72ab90a ARM: shmobile: Add SMP boot function and argument
Add code for mach-shmobile to allow specifying boot function
and argument. Will initially be used for SMP together with SCU
but may in the future also be used for deep sleep resume. This
patch removes one inline virtual to physical address conversion.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:27 +09:00
Magnus Damm e26f406740 ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
Instead of having a hard coded virt-to-phys address
conversion code in sleep-sh7372.S, rework the code
to do the conversion in C using virt_to_phys().

This removes the need for PLAT_PHYS_OFFSET which
in turn is needed for ARCH_MULTIPLATFORM.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: squashed in build fix posted as
 "ARM: shmobile: sh7372 build fix for SUSPEND=n && CPU_IDLE=n"]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:06:47 +09:00
Olof Johansson 677b5c48bd Second Round of Renesas ARM-based SoC updates for v3.11
* Ether device name updates for r8a7778 and r8a7779 Sergei Shtylyov
 * Extended clock and driver coverage for r8a7778 by Goda-san and Morimoto-san
 * Extended clock and coverage for r8a73a4 and r8a7790 by  Guennadi Liakhovetski
 * HSCIF support for r8a7790 by Ulrich Hecht
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRuWnoAAoJENfPZGlqN0++mkAP/iOpvtb8sND7n9g8SHE7/6W5
 sXHWSTbeGlF0ST47EsIdrmAcGAWMelg8GF0F7hBEwzb3zl+MPBnopI/RAVphVhIy
 6Z1p1wuDvV4Zj1JsHNB3Y1NjHPO3be+14TZyTTwHpV9Ri1navYNB9jMnhShJHsYq
 qfP9CryfXJgxv9YKyAv90UUvVfGNTQxRpEqkEYCDHtAJoWIcw3H4GpaxejTUp1xv
 0L2/lvfeQbm4lUsd0i3I5Lm7+IQ375/nzQc2k9wqTNsHdAoeHC2LvKKzq5NXUv+/
 4U+bmla6DxDioVzcYutCnOrbxNp0iIaNZFJqaHaxlllG45oSqOLFtwAXRLVW7YXO
 gP5ZxeX3ITaLNxia9KZvwPP77guZQ8XS1TQ+vU0noDkA3V4qKbYDvvg7FkpUL+H4
 sPhCFx2VG3WWStWas4IA9Db04z9m5bReN1BsQeTSaRrjA19ctkuOsaLDrW83ngvu
 xQ754d26Yrmy/HaUojqVqR/oI+e6h3ps8lCtAKyi7MT7DTDve5EEMdw8ukte8RY0
 v7Ad2bKFBdibYAH4Mfmmn0OX/uKZCDur0lMgUioi38Cto7SuIENnwm3vz0lg0t6x
 79L3awlkaMP/Hvt4U9sLtV4bzyo1FVNzntmu0vaQDFSk1o29YSoNhR//WL67CeFr
 grNpVRBO9g9iEx78yGHV
 =wQKf
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Second Round of Renesas ARM-based SoC updates for v3.11

* Ether device name updates for r8a7778 and r8a7779 Sergei Shtylyov
* Extended clock and driver coverage for r8a7778 by Goda-san and Morimoto-san
* Extended clock and coverage for r8a73a4 and r8a7790 by  Guennadi Liakhovetski
* HSCIF support for r8a7790 by Ulrich Hecht

* tag 'renesas-soc2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI
  ARM: shmobile: r8a73a4: add clock definitions and aliases for MMCIF and SDHI
  ARM: shmobile: r8a7778: add support MMC driver
  ARM: shmobile: r8a7778: add support HSPI driver
  ARM: shmobile: r8a7778: add support I2C driver
  ARM: shmobile: r8a7778: add support MMC clock
  ARM: shmobile: r8a7778: add support HSPI clock
  ARM: shmobile: r8a7778: add support I2C clock
  ARM: shmobile: r8a7790: HSCIF support
  ARM: shmobile: r8a7778: fix Ether device name
  ARM: shmobile: r8a7779: fix Ether device name

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-shmobile/clock-r8a7778.c
	arch/arm/mach-shmobile/include/mach/r8a7778.h
2013-06-14 18:00:00 -07:00
Kuninori Morimoto f9094c526b ARM: shmobile: r8a7790: add __initdata on resource and device data
These data will be kmemdup()'ed on
platform_device_add_resources() and platform_device_add_data()
This patch removed "const" to avoid section type conflict
with r8a7790_boards_compat_dt

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13 14:47:34 +09:00
Simon Horman 12dd975251 Renesas ARM based SoC pinmux and GPIO update for v3.11
SH-PFC:
 * Entries for INTC external IRQs
 * Remove dependency on GPIOLIB
 * PFC support for r8a7790 SoC
 * Pinmux support for r8a7778 SoC
 * Increase pin group and function coverage for sh7372, r8a7740,
   r8a7778, r8a7779 and r8a7790 SoCs
 * Use pinctrl mapping on mackerel, ap4evb, armadillo800eva,
   bonito, bockw, lager boards
 * Use RCAR_GP_PIN macro in marzen board
 * Remove unused GPIOs for sh7372, sh73a0, r8a7740 and r8a7790 SoCs
 * Add bias (pull-up/down) pinconf support for r8a7740 SoC
 * Add VCCQ support for sh73a0
 
 GPIO car:
 * Add RCAR_GP_PIN macro
 * Add support for IRQ_TYPE_EDGE_BOTH
 * Make the platform data gpio_base field signed
 
 The GPIO changes have been included as the RCAR_GP_PIN and
 IRQ_TYPE_EDGE_BOTH changes are depended on by SH-PFC changes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRrvTrAAoJENfPZGlqN0++OGkP/0ZqhzLRSqojR4YgoWlsL2UE
 lKS41m8/eW2mPbyW2U+rpSWzPghJic9b9AgyKZXcpV5kzp2GQLzyLqRT3gqOoDP/
 /4mxstqoCpvHq0+UsGSlv2yk9zMzYjL7dDbGslPhVXZD5SmGN/NM0W80le37ZDEd
 UqIzg6O/dB+vZl343nXrZKvGc73HlDY9EiWhpgB6tbLiUvmbT+hATTg+ExY8cwEF
 742klazJoqN+DVF6ihx7BQwDWs/beUyqp+ii0rfzcU5yI+fWe0cyHa+v64rZFQhI
 F2rWLQu6rkDRCpcwvfu21azDKPFG8cMiV0xxgxF5bvg6STUfiAEpaCmjw1v+F30g
 S+TdoeUlXkH1x761CDJ0qo0N4SQ2ueJ8/UPMOaA4cRU9mGCSp4o+S8PlUCd1HSVH
 vKQzfxnyaqt0LPi23KAkXbAiwxwrq4ru06XvsuC9KbAdAK9n+FpnJKFZ7fv8c1uw
 8a7FDSFdVnQ6E6DKvxl33JfDMsPEpFmikw+Nr/1Jnxms9THpCMphhZVc4mUDmdQT
 BLxSXa2Y5ihiQoaHjJnrENUGRI4o4oZwVDCU5i0eUQBeqbx00UEW85iUNiVPecW1
 aKphnrhoxqQZMHRrU2MqCe2mY5SPSnbKdc2YVcTW9/yxS7Q16txmAsiDyfiVB+bd
 ZHw324BCBEvSk4NM2syW
 =zNOH
 -----END PGP SIGNATURE-----
mergetag object 413bfd0e67
 type commit
 tag renesas-soc-for-v3.11
 tagger Simon Horman <horms@verge.net.au> 1370590998 +0900
 
 Renesas ARM-based SoC updates for v3.11
 
 * Increased clock coverage for r8a7740, r8a73a4, r8a7778 and r8a7790
 * Use fixed clock ratio for r8a7778
 * Always use shmobile_setup_delay for sh73a0
 * Add add CPUFreq support for sh73a0
 * Check kick bit before changing rate on sh73a0
 * Do not overwrite all div4 clock operations on sh73a0
 
 * Cleanup SH_FIXED_RATIO_CLK and SH_FIXED_RATIO_CLK macros
 * sh73a0: Use DEFINE_RES_MEM*() everywhere
 * r8a7740: Make private clock arrays static
 * r8a7778: Correct model number
 
 The last four changes listed above are cleanups. I have included them
 in this series as all bar the last one are dependencies of non-cleanup
 patches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRsY+RAAoJENfPZGlqN0++q3cP/0UR42WWj+pm6a7N7JDiby+b
 +Dv1qxQB4zN+1eBFfLoNUNponGbKLPXP7ULHkN0BX0j5xLYhVpZJeCdAdMvHnKG7
 rvDLfjE0eBWyxxnaKIx/UyOmE6TTWn/TRbj726qpQWv4CFNEtEx+WdRymMSikSPK
 HeaXuhpm98kwqYpCH8yVu2VYgYMgv8fJxhd/N2ppsN65KKoTq5EITZ9K7+sqlueX
 uwG45uquBM3K+UGfr/7KMhEY/IvWHrCqq2MpgRrcJAy6ROK39oNDtG/YfI8II/dK
 T8IOCpHKbDvsvU/XGY3E0e2H1FRZCqzfI0dYp9Q/iSd9HSfOR3CwoMlZCC6zRBq2
 dzHRqsklurbYjCSOQlHRxGNISBaSnaf6Fy8Ok720Zh7xDPinZeQrfxGccYA8eQaW
 +Z7k3k6M5RaipRln5Hj4XiWc+Vk5ieJ1/clvSNpq+mmIxwGLJOdsqwhBktnGwsgs
 3hxlzH6owR6JgP5iDZYcTdngRqhPb8AZeQduA0I3Lwf/1eyBKYH6ryPaKVutH89Q
 PKJnxKETbEDN7eueblV5EhBeFHewTRn5U6wnOkD2ompuGUQCs1T2djF4F0IFy5WD
 KZBaTkaKORaUq5woRzc12RYnLkRVlyQ1W+1u3e7NpZSG0ZlSufgW2m4pnfSpBJ6h
 y+IBsNzw4ZHkNbwtj5ai
 =9UCz
 -----END PGP SIGNATURE-----

Merge tags 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11' into cleanup

This merge has been performed in order to provide the pre-requisites for
a cleanup patch for the lager board to annotate various structures
with __initdata.

Conflicts:
	arch/arm/mach-shmobile/Kconfig
	arch/arm/mach-shmobile/include/mach/r8a7778.h
	arch/arm/mach-shmobile/setup-r8a7778.c
2013-06-13 14:45:20 +09:00
Kuninori Morimoto 1e0edb76e9 ARM: shmobile: bockw: add MMCIF support
This patch enables CN26 MMCIF

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13 14:42:42 +09:00
Kuninori Morimoto c06a164ce2 ARM: shmobile: bockw: add SPI FLASH support
This patch enables Spansion S25FL008K chip on HSPI0

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13 14:42:42 +09:00
Kuninori Morimoto ed17be92c0 ARM: shmobile: bockw: add I2C device support
This patch enables rx8581 on I2C0

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13 14:42:42 +09:00
Sergei Shtylyov 9aa3853a6f ARM: shmobile: BOCK-W: add Ether support
Register Ether device from bockw_init(), passing the platform data to it, adding
only the RMII pin group to bockw_pinctrl_map[].  Although the LINK signal exists
on the board, it's connected to the link/activity LED  output of the PHY, thus
the link disappears and reappears after each packet. We'd be better off ignoring
such signal and getting the link state from the PHY indirectly.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[horms+renesas@verge.net.au: manually applied]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-13 14:42:42 +09:00
Simon Horman 2e9a222e27 Merge branch 'soc2' into boards-base
This is to provide MMC support for the r8a7778 SoC which
which required by patches to add MMC support to the
bockw board.
2013-06-13 14:41:53 +09:00
Olof Johansson 1e76c7cb3c update exynos DT for
- usb3phy and dwc3 for exynos5250
 - keypad for exynos4412
 - TMU clock for exynos4210
 - MFC clock for exynos4
 - DP controller for exynos5250
 - G2D clock for exynos4
 - some exynos boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRt401AAoJEA0Cl+kVi2xqRzIP/3Ln477F6wWWsFM3WHEeSNdo
 +reRq+cy4MC4se29RSCvlaAvhrCHwmfULG4O6x9om4IRMTWLFiASPhMSFons2PyV
 kghh8mhfZgbsF2U/xdh71xvgLfm3qyf7kmaYzkIs2llBvZYiEc9SbD+YNvc+V/gT
 rDcvvfrFwZPvlTiSnx+1tpNEHZ5zIbaInzLsJaoarBfOtK0A8vZzgZj88f98zILE
 hDZqZg7CNCECo8MNVJLHEi3Djq7nt9M748KKG1f2brRSu+3yo2aK9YelXeK2AzZT
 Mf0IcO8o/TwPVaHy8xD2GRE1Yr6QjY7yxvmYdNptoccxoQ6pNBG+2Ki9KpxBi3wL
 VTi5NMVqMzzH2hpCtUu2yDKqF3oUUYlVHytiYsIAx9T2eGMukNcfyfoFCScvRZy+
 XeQjc2hYr/74FdpXMypIVRzIDdlBEJfMbj1Pu03TzXz+9UsteRdmFfCe1rTczNHT
 +LRfoIiTTeN9YSZnwCKrhjCk/DJUZYIE8EofXGI95yAM4Ssk/cZuwqPC907LhtD1
 PEypWiVzhrk/tHadEyS3ybA0jr5pwO7RDw6Bix1CTixAq7bKBx1XEBJXXGnqdYog
 K39dAiu4CEZf11RWaEYPfhWLPJwnltrDulygDTvxXKCkp/0StmWlt0HIogYdj9mw
 O5d1HaA/zOOMSQHyB7FR
 =L7JN
 -----END PGP SIGNATURE-----

Merge tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim:
Update exynos DT for
- usb3phy and dwc3 for exynos5250
- keypad for exynos4412
- TMU clock for exynos4210
- MFC clock for exynos4
- DP controller for exynos5250
- G2D clock for exynos4
- some exynos boards

* tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (456 commits)
  ARM: dts: add ohci and ehci controller nodes for EXYNOS5440
  ARM: dts: Update G2D documentation for clock entries
  ARM: dts: Add clock entries to G2D node for exynos4x12
  ARM: dts: Add clock entries to G2D node for exynos4210
  ARM: dts: Remove duplicate and add missing G2D nodes
  clk: exynos4: Add additional G2D clocks
  ARM: dts: Document DP clock in samsung,exynos5-dp binding
  ARM: dts: add pin state information for DP HPD support to Exynos5250
  ARM: dts: add dts node for the ahci sata exynos5440
  ARM: dts: add vmmc regulator support for ODROID-X
  ARM: dts: add max77686 node entry for ODROID-X
  ARM: dts: Enable RTC by default on EXYNOS5440
  ARM: dts: Add display timing node to exynos5250-arndale.dts
  ARM: dts: Add clock provider information for DP controller in Exynos5250 SoC
  ARM: dts: Add DT node for DP controller for Arndale Board
  ARM: dts: Remove combiner IRQ node from exynos4x12.dtsi
  ARM: dts: add max8997 device node for exynos4210-origen board
  ARM: dts: Enable TMU on Origen4210 board
  ARM: dts: Add TMU clock entries to exynos4210.dtsi
  ARM: dts: Update MFC documentation for clock entries
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-12 16:27:21 -07:00
Guennadi Liakhovetski 018222f5d3 ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI
Add MSTP clock definitions and fix aliases for the two MMCIF and four SDHI
interfaces on r8a7790 (H2).

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
[horms+renesas@verge.net.au: applied manually]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12 21:07:38 +09:00
Guennadi Liakhovetski 111fad56a8 ARM: shmobile: r8a73a4: add clock definitions and aliases for MMCIF and SDHI
Add MSTP clock definitions and fix aliases for the two MMCIF and three SDHI
interfaces on r8a73a4 (APE6).

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12 21:07:38 +09:00
Magnus Damm 4f309d272f ARM: shmobile: Remove romImage CONFIG_MEMORY_START
Instead of relying on CONFIG_MEMORY_START for memory
base address, let each romImage board header file
specify this information.

This is reworks code not to rely on CONFIG_MEMORY_START
which in turn is needed for ARCH_MULTIPLATFORM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12 20:49:57 +09:00
Magnus Damm 12dca809ef ARM: shmobile: uImage load address rework
This is V2 of the mach-shmobile uImage load address rework patch.

Rework the mach-shmobile uImage load address calculation by storing
the per-board load addresses in Makefile.boot. This removes the
CONFIG_MEMORY_START dependency from Makefile.boot, and it also makes
it possible to create safe kernel images that boot on multiple boards.

This is one of several series of code that reworks code not to rely on
CONFIG_MEMORY_START/SIZE which in turn is needed for ARCH_MULTIPLATFORM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12 20:49:56 +09:00
Kuninori Morimoto 31b2eaccd6 ARM: shmobile: r8a7778: add support MMC driver
Add a platform device for the r8a7778 MMC.

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11 17:32:24 +09:00
Kuninori Morimoto 8b89797f32 ARM: shmobile: r8a7778: add support HSPI driver
Add a platform device for the r8a7778 HSPI.

Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11 17:32:24 +09:00